Brian Schwind
cd594a4296
Fix according to review comments
2016-10-11 20:51:29 +09:00
Brian Schwind
a323680115
Add a TSL2561 driver and example usage
2016-09-24 19:54:54 +09:00
Vlad Ivanov
8368929a66
paho_mqtt_c: refactor: rename symbols so they all have same prefix ( #204 )
...
* paho_mqtt_c: refactor: rename symbols so they all have same prefix
* Update AWS IOT example after MQTT refactoring
2016-09-15 19:52:57 +02:00
ourairquality
e6eda5c3ff
i2c: use open drain for output rather than flipping between input and output.
2016-09-01 22:48:02 +10:00
rongsaws
7041c014bb
Added a MQTT pub/sub example of using AWS IoT ( #173 )
...
* Added a MQTT pub/sub example of using AWS IoT (via ECC based TLS1.2 connection).
* Fixed a buffer overflow issue when receiving large MQTT packet.
* Reset TLS connection on read/write errors.
2016-08-29 19:55:32 +02:00
ourairquality
f0c43ff5d5
BME280 support.
...
The BME280 is close to compatible with the existing BMP280 and extends it with support for measuring humidity, so support has been bundled into the bmp280 driver.
The example now auto-detects the device and displays the humidity for the BME280.
The I2C bus initialization has been moved out of the bmp280 driver to support multiple devices.
The check-id and reset logic has been bundled into the driver initialization. It needs to be re-initialized after reset anyway and the chip-id is need to initialize it, just re-initialize to reset.
Support has been added for multiple devices. The calibration data storage needs to be managed by the caller rather than static data. The caller can choose the I2C address to allow two BMx280 devices to be used on the same I2C bus.
An interface has been added to return the measurement values in an integer fixed float format. The float format interface is still there.
All the values are read in one I2C transaction to ensure they are a consistent set.
Renamed bmp280_calib_t to bmp280_t, and removed read_register8.
2016-08-17 23:33:04 +10:00
sheinz
666f821263
ws2812_i2s: WS2812 leds driver implementation using i2s_dma library
2016-08-16 10:53:56 +03:00
sheinz
27135d6252
i2s_dma: Implementation of I2S + DMA wrapper library
2016-08-16 10:19:33 +03:00
Peter Andersson
5ea0228639
spiffs: enable temporal cache for spiffs v 0.3.6
2016-08-14 15:15:45 +02:00
Johan Kanflo
0c09054f3e
Merge pull request #178 from sheinz/feature/spiffs_update
...
SPIFFS: Selectable configuration of SPIFFS
2016-08-09 22:32:37 +02:00
Johan Kanflo
a868f9dadb
Updated SPIFFS to 0.3.6
2016-08-09 20:33:40 +02:00
sheinz
5051c5c528
SPIFFS: Selectable configuration of SPIFFS
2016-08-08 23:18:15 +03:00
sheinz
964a2f850a
Merge pull request #165 from ourairquality/bmp180-rework
...
bmp180: make a lower level interface available and support oversampling.
2016-08-06 00:39:43 +03:00
Bhuvanchandra
782cdfd11d
extras: ds3231: Add support for DS3231 real-time clock (RTC)
...
Add support for DS3231 extremely accurate I2C real-time clock (RTC).
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@gmail.com>
2016-08-03 01:23:43 +00:00
Johan Kanflo
083aa0451a
Merge pull request #163 from sheinz/feature/spiffs
...
File system support. SPIFFS integration.
2016-08-02 15:42:22 +02:00
sheinz
d69b8390d4
SPIFFS: Fix PR review comments.
...
* Enable SPIFFS_USE_MAGIC
* Enable SPIFFS_USE_MAGIC_LENGTH
* Enable SPIFFS_FILEHDL_OFFSET
* Rebuild mkspiffs if spiffs_config.h is changed
* Emulate NOR flash in mkspiffs
* Build spiffs image in 'flash' and 'test' targets
2016-07-27 10:12:59 +03:00
sheinz
0ec47b5de9
Merge branch 'feature/spiffs' into experiments/spi_flash_reimplement
2016-07-21 16:48:26 +03:00
sheinz
38cccbd456
SPIFFS: Optimized SPI data read/write.
...
Unaligned read/write from/to SPI data registers is rewritten in
assembler to improve performance.
2016-07-21 16:36:55 +03:00
ourairquality
41d4427fba
bmp180: separate the task and queue interface from the lower level support.
...
This just separates them in the one file leaving it as possible future change to actually remove the higher level api or move it to an example.
2016-07-20 18:52:13 +10:00
ourairquality
05bbe48bd4
bmp180: make a lower level interface available and support oversampling.
...
An application using multiple I2C devices will need it's own
loop. This reworks the code to make the detection, calibration
constant loading, and measurment functions available too without
having to use the bmp810 task which is still retained.
Adds support for oversampling.
Fixes a bug in the calculation of the temperature.
Better error handling. Checks for I2C errors and errors in the loading
of the calibration constants and propagates these up.
2016-07-20 18:42:51 +10:00
sheinz
281faa2cac
SPIFFS: Wait SPI idle optimization.
2016-07-19 17:38:21 +03:00
Angus Gratton
22c480b583
Merge pull request #160 from sheinz/feature/bmp280
...
BMP280 pressure sensor driver and example.
2016-07-19 08:22:14 +10:00
Johan Kanflo
38375e218a
Merge pull request #164 from ourairquality/i2c-open-drain
...
i2c: use open drain outputs.
2016-07-18 22:01:34 +02:00
sheinz
4b1568cbb9
SPIFFS: flash access refactoring.
2016-07-18 13:12:21 +03:00
ourairquality
16157080cd
i2c: use open drain outputs.
...
Configure the pins as open-drain just in case the code forces them
high although it should be configuring them as inputs to let them float high.
Initialize the pins when the driver is initialized.
Enable the internal pull-ups to prevent them floating too high if not
connected and damaging the circuit.
2016-07-18 14:35:01 +10:00
sheinz
5d5f28a22f
SPIFFS: Bypass SDK and bootrom for flash access.
...
Accessing SPI flash using reversed engineered functions.
2016-07-16 00:22:33 +03:00
sheinz
fb187eae08
Merge branch 'feature/spiffs' into experiments/spi_flash_reimplement
2016-07-16 00:19:21 +03:00
sheinz
0a98f43902
SPIFFS: Fixed linux build and travis build
...
mkspiffs utility explicitly use gcc to compile
2016-07-15 19:01:17 +03:00
sheinz
55b7d29767
SPIFFS: Fix SPIFFS rebuild if SIZE is changed.
2016-07-15 15:44:22 +03:00
sheinz
924860a78f
SPIFFS: Update example, README.md
...
Separate method to initialize SPIFFS memory buffers.
REDME.md for spiffs component.
Simplify spiffs example.
2016-07-15 15:22:03 +03:00
sheinz
66610c56cb
SPIFFS: Improve SPIFFS image build
...
Rebuild SPIFFS image if files change.
Rebuild mkspiffs if SPIFFS_SIZE is changed in Makefile.
2016-07-15 01:21:32 +03:00
sheinz
22654a4de7
SPIFFS: Support lseek, stat, fstat
...
Support for lseek, stat, fstat added.
Test extended to covert those functions.
2016-07-14 16:13:03 +03:00
sheinz
bfa20af855
Fix branch merging.
...
Changes in esp_spiffs.c recovered.
2016-07-14 15:44:02 +03:00
sheinz
d25b8b2a55
Create SPIFFS image and flash it.
...
mkspiffs is added to create SPIFFS image from directory with files.
Build process changed to flash SPIFFS image if necessary
2016-07-14 14:49:34 +03:00
sheinz
5c12b7c7e9
Draft implementation of SPIFFS integration
2016-07-14 14:49:34 +03:00
Angus Gratton
eac9504d8a
Merge pull request #158 from baoshi/mqtt_fix
...
Handling MQTT read failure and send buffer length
2016-07-14 07:30:35 +10:00
Angus Gratton
b15b536e40
Merge pull request #154 from SuperHouse/open-libmain
...
First open_esplibs batch, libmain (most of libmain open sourced)
2016-07-14 07:29:28 +10:00
sheinz
91e2f6c0a1
BMP280 driver: typo fixed
2016-07-08 14:59:21 +03:00
sheinz
db4e39b8bd
Update component.mk
...
Comment typo fixed.
2016-07-08 12:52:54 +03:00
sheinz
a155928f19
Update README.md
2016-07-08 12:49:51 +03:00
sheinz
c19126fc13
BMP280 driver: Add README.md
2016-07-08 12:40:15 +03:00
sheinz
440ad67834
BMP280 driver: Forced mode. Soft reset.
2016-07-07 23:39:25 +03:00
sheinz
4a2679271e
BMP280 pressure sensor driver draft implementation.
2016-07-07 18:04:17 +03:00
sheinz
6ff78f802d
DHT11/DHT22 library fixes.
...
Fixed temperature below zero.
Fixed checksum overflow verification.
Fixed inconsistent reading of DHT11.
2016-07-06 21:01:44 +03:00
sheinz
a41407e3d1
DHT11/22 library fix
...
Support DHT11/DHT22 modules.
Data representation fix.
Library refactoring.
2016-07-06 15:58:59 +03:00
Angus Gratton
e3827b2f1c
Fix rboot-api sdk_spi_flash_read pointer types
2016-07-06 17:21:34 +10:00
baoshi
09a5ec062a
Handling MQTT read failure and send buffer length
2016-07-05 21:37:47 +08:00
sheinz
33b63d46a5
Reverse engineered some spi_flash functions
2016-06-29 00:47:14 +03:00
sheinz
ab795350fb
Draft implementation of SPIFFS integration
2016-06-27 18:06:06 +03:00
iosen
37180024f4
sntp: free the pbuf after sending the request
...
Fixes a memory leak.
2016-06-26 21:36:04 +10:00