libvirt's backup copies the disks of a running or paused VM from one
instant into new volumes while it keeps running; the clone is defined
shut off as before. The VM is held for the copy, the copy can be
cancelled, and recovery reads the job's records and libvirt.
The clone's definition is one method for both paths; wvmInstance can check,
start, follow, read and abort a push backup of a VM's disks into new
volumes, and freeze/thaw the guest.
Brite ships with Bootswatch 5.3.8 but was left out when the other themes
were updated. Its sources are copied unchanged from the package, and its
wrapper sets the same breadcrumb, link and navbar spacing as the other
themes. The wrapper also makes the navbar text black: navbar.html uses
navbar-dark on bg-primary, and white on Brite's lime is unreadable.
Brite loads no web font. The Settings page lists it because the theme
list is the wvc-themes directory, and the theme test compiles it with
the rest.
The job panel follows an ISO upload, so the dialog closes when the first
chunk is accepted and its progress bar goes; the dialog opens again with
the error if the upload stops. The browser still sends the file, so the
page asks before it is left while an upload runs. The storage page no
longer includes the please-wait dialog, which nothing on it opened.
The upload session lives in a job instead of flocks and .meta/.done
files; the job panel shows and cancels it; an upload idle for an hour is
ended and its partial file deleted; the page no longer reloads after an
upload.
Request jobs (an upload's chunks) run in gunicorn: their kind is admitted
running with the request as its worker, never claimed or recovered by the
worker, cancelled in the request, and asked by every housekeeping pass to
end its jobs that went idle. The panel can follow a job the page just
started. A job a request runs does not wait for the worker, so it does not
raise the worker-unavailable warning on the Jobs page or in the panel.
Only the request middleware loaded the Settings page values, so in the
worker process app_settings stayed empty: a VM create job failed reading
the default volume format, and the snapshot free-space check fell back to
its defaults. The worker now loads them before each job.
The list and the detail page were rendered once, so a job that finished
kept showing running until the page was reloaded by hand. While a shown
job is queued, running or cancelling, the page now reloads every five
seconds (not while hidden or while a form field has focus).
A disk-only snapshot was taken without any space check, though its
overlays grow as the guest writes and a later delete merges them down;
a full pool pauses the guest and can leave the snapshot undeletable.
Only a memory snapshot was checked, for the memory alone.
Before a snapshot, each storage pool with a disk of the VM must have
free a share of those disks' virtual size (10%, at least 1 GiB), and
the pool of the memory file the VM's memory on top. Both values are on
the Settings page (Snapshot Free Percent, Snapshot Free Min GiB; 0
turns a rule off, an invalid value keeps the default). The pools are
refreshed first, and a failed refresh or an unreadable volume refuses
the snapshot instead of skipping the check; a disk in no pool is not
checked. Nothing is reserved: later writes can still fill a pool.
A disk-only snapshot of a running VM is crash-consistent: data the
guest has not written yet is missing from it. With a connected QEMU
guest agent, the snapshot form now offers to freeze the guest's file
systems while the disks are snapshotted (libvirt's QUIESCE flag); the
box is checked by default and can be cleared. It is offered only for a
running VM whose agent is connected, and not together with memory:
libvirt accepts quiesce only for disk-only snapshots, and a memory
snapshot keeps the whole guest state anyway. A request that does not
fit is refused before libvirt is called.
Reverting a running or paused VM to a disk-only external snapshot
powers it off: libvirt starts it again from the snapshot's disks, as
after a power cut. The confirmation now says so for such a snapshot; a
snapshot with memory resumes the VM as it was saved.
libvirt keeps snapshot metadata on the source host and a migration does
not carry it, even when both hosts share the disks. Only the shut-off
path refused such a VM itself; a running or paused one relied on
libvirt's own refusal. moveto now refuses it for every state, before
any check against the destination, with the same message.
After a snapshot revert or delete, files libvirt could not remove are
named in a warning that says nothing uses them and asks to remove them
by hand. A file another VM on the same host uses (as a disk, a backing
file or a snapshot file) is no longer named: removing it would break
that VM. The warning now says no VM on this host uses the files.
libvirt deletes any volume it is asked to. The storage page and the API
deleted a VM's disk, the base image of another volume or the file a
snapshot was taken on without a check, breaking the VM or its
snapshots.
wvmStorage.del_volume now refuses a volume a domain on the compute uses
as a disk or a backing file of one, a file of a domain's snapshots, or
the backing file of another volume. The check is the one destroy
already used, moved to wvmConnect and extended to snapshot files, so
destroy also keeps the files of another VM's snapshots. The storage
page shows the refusal; the API answers 400 with it, as for other
refusals. Deleting a disk from a VM refuses after the detach when the
VM's own snapshots need the volume, and says the volume was kept.
Network disks count by their source name, pool volume disks by their
volume's path. A volume whose metadata cannot be read stops the check
instead of counting as unused; only one removed meanwhile is skipped.
The check and the delete hold the compute lock, so no VM operation
attaches the volume in between; a busy compute is a message on the page
and 409 in the API.
Deleting a VM with its data deleted only the images its disks pointed
at. With external snapshots that is the newest overlay: the image the
snapshots were taken on, the older overlays and the memory files stayed
on disk, with nothing referring to them once the VM and its snapshot
metadata were gone.
The files the VM's snapshots were taken on, down each disk's backing
chain, the overlays of snapshots kept off the chain after a revert, and
the snapshots' memory files are now the VM's own too. A template the
VM grew from ends the chain and stays, as does an overlay of a disk
detached since. The backing references of the VM's own volumes no
longer count as another domain's use, and a file another VM uses keeps
the files below it.
A backing file that cannot be read (other than one in no pool) stops the
split before anything is deleted, instead of ending the chain there.
The snapshot tab listed the VM's snapshots three times per page: once
per kind and once more for all of them. The list of all is now made
from the two kinds, so the combined flag is no longer used anywhere.
The revert confirm named only the disks the persistent definition
would lose. A disk hot-plugged into the running VM alone is detached
too, so the live definition is compared with what ran when the
snapshot was taken.
A storage pool refresh error after libvirt had already made, reverted
or deleted the snapshot was shown as if the operation had failed. It
is now logged, and the left-behind check is skipped then, since a stale
pool still lists the removed files. A volume removed while that check
reads it is skipped too.
An error reading the block jobs no longer breaks the instance page;
create, revert and delete still query the jobs again and refuse.
When libvirt cannot remove a snapshot file it merged or discarded, it
only logs a warning and the delete or revert still succeeds. On NFS it
removes them as the qemu user, so an image directory the qemu user may
not write to left every merged overlay on disk without a word.
Revert and delete now compare the files in use before and after and
show a warning naming the ones still on disk. Only a snapshot's own
files (overlays, memory) and overlays on a snapshot point count, and a
disk the revert detached is never named, so a kept disk is not offered
for removal.
Create, revert and delete are one libvirt call each. The pflash-to-rom
loader rewrite, the hand-written block commit and the s1./s2. names are
gone, so UEFI VMs can take external snapshots, a revert keeps disks added
later, and deleting an older snapshot keeps the newer one.
Create refuses what libvirt could not revert or delete later: internal
snapshots on the VM, a saved state, a running snapshot job, disks that
are not files, CD-ROM media, a branch after a revert, and memory without
a running VM or room in the first disk's pool. A disk-only revert keeps
the VM running, paused or shut off; one with memory resumes it as saved.
A revert in the same second as the previous one, which libvirt fails
after stopping the VM, is retried once.
A snapshot the old code took of a UEFI VM saved the loader as rom; its
revert is refused (deleting it still works).
The snapshots tab lists internal and external snapshots separately, can
save memory too, shows running snapshot jobs, and the revert confirmation
names the disks it detaches and that NVRAM is not restored.
131 test modules sat next to the code they test; instances alone had
51 of them beside views.py and utils.py. They move into a
tests/ package per app, and the JavaScript checks into
webvirtcloud/tests/js. Each non-empty tests.py becomes tests/test_views.py;
the empty generated stubs are removed.
Imports of the app's own modules become absolute, paths built from
__file__ go one level up, the live helper is instances.tests.livetest,
and coverage omits */tests/*. The suite discovers the same 960 tests as
before.
Static URLs carry no version, but nginx served them with expires max, so
after an update or a theme change browsers kept the old CSS and JS. They
now revalidate each load (304 when unchanged). CI checks the header, the
304 and that a changed file is sent again.
Bootstrap SCSS, the JS bundle and the Bootswatch themes go from 5.3.3 to
5.3.8 (bug fixes only), and wvc-main.min.css is recompiled from zephyr.
Bootswatch now gives table text the body color, and Lux drops card and
modal header borders.
Tests compile every theme with the pinned libsass and check that the
shipped CSS is zephyr from these sources. The update and rollback steps
put back the two files a theme change rewrites, or git refuses to pull
over them.
nginx serves STATIC_ROOT (staticfiles/) since collectstatic moved there,
but the theme view wrote only static/css/wvc-main.min.css, so a new theme
showed up only after the next collectstatic. The view now also writes the
collected copy when collectstatic has run; the source copy stays so a
later collectstatic keeps the theme.
django-qr-code was used for one thing: the QR code in the OTP e-mail,
as an inline SVG and a PNG. It brought pydantic, pydantic-core,
annotated-types and typing-inspection (about 10 MB) and, from 5.0 on,
Pillow. segno, which it used underneath, now draws both images with the
same options (error correction M, 4-module border, 1.8 mm SVG modules,
12 px PNG modules); the SVG, the PNG and the alt text are byte for byte
what django-qr-code 4.2 produced. account.html loaded the tag library
without using it.
