- A secret is in use when a VM names it in a disk, a host device or its
vTPM, or a pool in its source, by UUID or by its usage within the usage
type, as they run and as saved. The vTPM, host devices and pools' saved
definitions were not checked before.
- A Ceph key is taken in base64, as `ceph auth get-key` prints it; any other
value is a password or passphrase stored as typed, spaces included.
- A new secret takes its value at once; a value refused leaves no secret.
- TLS and vTPM secrets can be created; the usage has no length limit.
- Every POST redirects; the list is read once and only with its users; a
secret, VM or pool gone meanwhile is left out.
- domain_trees() is shared by the in-use checks of secrets, network filters,
networks and pools; the storage page's Ceph secret picker reads the same
listing.
As the network and interface pages; plan reviewed with Codex.
- The list is one table with a search: each filter's chain, priority,
number of rules, the filters it references, and how many VMs and
filters use it directly; a row's menu clones it (one shared dialog,
the copy's name filled in) or deletes it, Delete disabled and saying
so while it is in use. Without the VMs (a host that fails to list
them) the list is not shown: it would offer to delete filters in use.
- New filter is one dialog with the filter as XML in the Ace editor,
from a starter filter, with what in, out and priority mean and a link
to libvirt's format.
- A filter's page: a Filter card (UUID, chain, priority, the VMs that
use it directly, linked, and the filters that reference it, linked);
its references with their parameters (one to a filter gone from the
host marked as missing, not linked), removed per row, added from a
select of the filters it can reference; its rules with the action as
a badge, the direction as to or from the VM, the priority (500 where
none is given), every protocol element with its attributes, a rule
of no protocol as any traffic of the chain, and when it does not
track connections; Add rule as an XML dialog; the XML, collapsed,
saved in place.
- The editors size themselves when shown and keep their label for
screen readers; tables keep their hidden
header text inside them, so a phone does not scroll the page
sideways. add_nwf_rule.html goes (the dialog is on the page).
Plan reviewed with Codex; libvirt's behaviour checked on a host.
- A filter is not deleted while a VM's interface references it, as the
VM runs or as saved for its next boot (a stopped VM too), or while
another filter references it: libvirt refuses only one a running VM
uses, and a VM using a filter that references a deleted one does not
start. The VMs are read from one listing, one or two XML reads each,
instead of a connection per VM; the refusal names them.
- Create refuses a name or UUID the host has, clone a name in use or
one outside the panel's names, and editing the XML must keep the
filter's name and UUID: each would replace another filter or make a
copy. Entered XML is read for these checks without expanding entities
or taking a DTD (util.parse_xml, shared with the network editor),
and a rule is one <rule> element.
- A rule or reference is deleted only while it reads as the page showed
it, not by index and three attributes: a rule alike in those or a
filter changed meanwhile loses nothing.
- A reference is added only to another filter of the host not
referenced yet; the picker offers those.
- References keep their parameters, in order (a name may repeat); a
rule shows every protocol element it has, a rule without one too.
- One change a POST (two would both start from the page's reading,
the second undoing the first); every change redirects and reports its
refusal as a message, a POST for a filter gone meanwhile going to the
list; the catch-all that showed any error goes, and so does
wvmInstance.get_filterrefs, which only the old delete check used. The list reads each filter's
XML once from one listing; a filter's page reads its XML once and
only the other filters' names; the per-filter XML dialog of the list
goes (a filter's page shows its XML). The XML editors send their text
untouched too.
As the storage and network pages; plan reviewed with Codex.
- The list is grouped by type (bridges, bonds, VLANs, ethernet; a type
the host has none of is left out), three cards a row, with a search
of their names, MACs and networks (table_filter.js, which now takes
any element with data-search as a row); a card per interface: its link
as the kernel reports it (up green, down grey, another state or
unknown told as such, no red card for a link that is merely down),
MAC, MTU, speed when known, the members it reports and the libvirt
networks that use it, linked.
- An interface's page: an Interface card (type, libvirt's own state
where it manages interfaces, link, start mode, MAC, MTU, speed, STP,
networks using it); on a host whose libvirt changes interfaces, a
card per family with how it is addressed and its addresses; the
members of a bridge, bond or VLAN with their link and speed, or that
none is reported; for a bridge, the running VMs' cards on it,
directly or through a network using it, with their tap and MAC,
linked (wvmInterface.get_vms: one domain listing). Not the bridge's
delay: netcf tells it in seconds, the udev backend in hundredths.
Start or Stop in its heading, Delete in its menu, disabled while it
runs, on hosts that can change interfaces only.
- A host whose libvirt only reads interfaces says so once, with that
it does not tell their addresses, instead of "None" on every page.
- The New interface dialog is one form, as the New pool and New
network ones (choice_dialog.js, radio_card.html): Bridge or
Ethernet, a bridge's member from the devices it can take, an
ethernet interface's device from the ones the host does not define
yet, a static address's fields with its choice; a refused interface,
or one libvirt refuses, opens it again with what was entered; a made
one opens its page.
- networks_by_device maps the libvirt networks to their bridges or
interfaces on the page's own connection.
Plan reviewed with Codex; tried on a udev host (AlmaLinux 10) and a
netcf one (AlmaLinux 8).
- Changes are one change of the host's configuration (libvirt's
interface change transaction): a bridge that does not start used to
be undefined, leaving its member without the addresses and start
mode the bridge took from it; now the whole change rolls back, the
member's own configuration too, and so does a commit libvirt refuses.
A rollback that fails too is reported with the failure, saying the
host's configuration may be changed.
Deleting a bridge, which defines its
members again on their own, is one change as well.
- A running interface is not deleted: the page hid Delete, but a post
deleted it. A bridge with addresses and several members is refused
(which member takes the addresses is the user's choice); the
confirmation says that its members are defined again.
- A bridge takes only a device in no bridge, bond or VLAN as the host
has them configured, at any depth (a bridge's bond's devices), not
the loopback, a libvirt network's bridge or a VM's tap; an ethernet
interface configures only such a device too.
- Whether the host can change interfaces: unsupported or refused by
its access rules is a no, bad XML a yes, anything else (the
connection, the login) is raised instead of taken for a yes. A page
whose host could not be read offers no actions.
- Reads: the list reads each interface's XML once from one listing
(listAllInterfaces: every state, not the active and the defined ones
apart); a page reads the running and the saved definition once each
(cached_property). netcf writes a link speed of -1 for a card that
has none (a virtio one) and then refuses its own XML: the saved one
is read instead, where virsh and the page failed. Name and MAC come
from libvirt's object, without a call. Each family says how it is
addressed (DHCP, autoconf, static or none) and every address, its
prefix where it has one; no
address is not "DHCP" any more. A bridge's members carry their link
state and speed; an unknown speed (0, -1, 4294967295) is none.
- The interface API lists from the same reader. get_details,
get_bridge, get_bridge_slave_ifaces and the per-family getters go.
As the storage pages; reviewed with Codex.
- The list is a card per network: its name with Active or Stopped and
Autostart badges, its type (network_mode: Isolated, NAT, Routed,
Open, Bridge, Macvtap, SR-IOV), its device, and each address with
its DHCP range; a bridge or macvtap network's addresses come from
the outside network.
- A network's page: its heading starts or stops it, the menu sets
autostart and deletes a stopped one. A Network card tells its state,
type, bridge or interface, MAC and what the type does; a card per
address (every <ip>, each with its DHCP range dialog, which libvirt
takes on a stopped network); its fixed addresses of every subnet in
one table, searched, each with Edit and Delete, one dialog adding
and editing them; the VMs whose definition names it, connected or
configured, linked (wvmNetwork.get_vms, one domain listing, a VM
undefined meanwhile left out); its
bandwidth limits where libvirt sets them (not on macvtap or SR-IOV
networks), in KiB/s, from the saved definition with a note that a
running network takes them when restarted; its XML in an accordion.
The page reads the running and the saved definition once each, and
only to render itself: its actions, which all redirect, read nothing
of it first.
- The New network dialog is one form, as the New pool one: the type
as radio cards (the radio_card.html include, now shared by both),
the chosen type's fields only, IPv6 with its box, a bridge or
interface suggested from the host's (get_host_interfaces, not the
bridges libvirt made for its own networks); a refused network or
one libvirt refuses opens the dialog again with what was entered,
the reasons beside the fields and focus on the first.
- What the New pool and New network dialogs share is one script,
static/js/choice_dialog.js: the radio cards show their fieldsets
(data-kinds) and a refused form opens again focused on its first
refused field; each dialog keeps only its own changes.
- The fixed-address dialogs per family go to the page's own dialog.
Reviewed with Codex against libvirt's network format and driver.
- Addresses: wvmNetwork found a network's <ip> by its text, so one
written as <ip .../> or <ip><dhcp>... without whitespace had none,
and a second address of a family overwrote the first. ip_networks
reads every <ip> in order, its index being libvirt's parentIndex:
family (ipv4 when written), address, subnet, DHCP (a <dhcp>, also
with fixed addresses only), first range and fixed addresses. The
parentIndex was guessed from the number of families, wrong when IPv6
comes first; changes now name the address by its index.
- One read: the page read the network's XML once per getter, ten or
more round trips; it reads it once (a cached_property of the
request's wvmNetwork). A change starts from the saved definition
read anew (VIR_NETWORK_XML_INACTIVE), not the running one: two QoS
changes on a running network no longer undo the first. The XML
editor shows and changes the saved definition, and defines this
network only (its name, and its UUID if given), read for that with
no entity expanded and handed to libvirt as written; an XML declaring
its encoding is taken. The actions go back to the network's page by
its own URL.
- Fixed addresses are found by the address they had (a hidden field),
not by the editable box: changing it and pressing Delete deleted
another entry or none. A change deletes the entry and adds it anew
from a copy, keeping what the page does not show (a client id, a
lease), and puts it back if the add fails: libvirt's own change
finds an entry by any of its MAC, address or name, so it could
replace another entry, and never by an IPv6 DUID. The address must
be of the subnet, not the host's, and neither it, the MAC or DUID
nor the name another entry's; an entry gone meanwhile is refused,
not added anew; an unchanged one writes no audit row. They can be
added while the network is stopped; a running network saved with
other addresses than it runs with is not changed live, as
parentIndex would name another <ip> of it.
- An address without a netmask or prefix takes libvirt's (IPv4 its
class's, IPv6 /64), for its checks and the overlap check.
- The DHCP range must be in the subnet, in order and not take in the
host's address.
- The create form takes a known mode only ("bogus" made an isolated
network, a missing one a server error); NAT and routed networks need
an IPv4 subnet, an isolated one may have none, a bridge or macvtap
network needs its bridge or interface and gets no addresses; IPv6
only with its box (whose value was "false", so never); no name or
subnet of another network of the host. "Fixed Addresses" at create
goes: it made a random-MAC entry for every address of the range,
for no real VM.
- Refusals of a fixed address, the DHCP range, the XML and a QoS
removal are messages, not server errors.
- The IPv6 forwarding of a bridge or macvtap network is the outside
network's, not ROUTE.
- get_networks_info reads each network's XML once and gives its
autostart and addresses too. Unused can_pxe, DHCP lease helpers,
get_uuid and the per-family range and host getters go.
wvmStorage.update_volumes looked each volume up by name three times,
read its info twice and its XML once: six round trips per volume to
the host. It now lists the pool's volumes as objects (listAllVolumes)
and reads each one's XML only (volume_details): name, capacity,
allocation and format are all in it, and libvirt refreshes a volume
for its XML as it does for info(). A pool of N volumes takes 2 + N
calls instead of 2 + 6N; 100 volumes over SSH on a test host read in
about 110 ms instead of 720 ms, with the same values.
- A volume deleted between the listing and its read is left out; any
other error is raised. Volumes come sorted by name.
- get_volume_details (the API's one volume) reads it the same way.
- Only a refused refresh (a clone running in the pool) is tolerated,
not any exception.
- The pool page reads its volumes and space only to render itself;
its actions, which all redirect, no longer read every volume first.
- get_volume_size and get_volume_allocation go: nothing else used them.
- The pool list is a card per pool, two to a row, as the host
Overview's Hardware and Software cards: its name with Active or
Stopped and Autostart badges in the header, then its type, its path
(an RBD pool's Ceph pool), its volume count and its space as the
Overview shows it (computes/pool_bar.html, without the name again);
a stopped pool's space is unavailable, not zero.
wvmStorages.get_storages_info gives the path, autostart and percent
used, which computes.views.host_pools computed for itself.
- A pool's page has a Space card (percent, used of size, of what: the
filesystem of its path, its volume group or the Ceph cluster, which
other pools may share; free) and a Pool card (state, autostart,
type, path) instead of a two-column list mixing facts and forms.
Start or Stop is its heading's button; autostart and deleting a
stopped pool are in its menu; the confirmations stay.
- The volume table drops the row number; a volume's capacity and what
it has allocated share a column hidden on a phone; its format is a
badge; its actions are one group, Clone and a menu with Delete,
named for the volume.
- "New pool", "New volume" and "Upload ISO" are labelled buttons
instead of bare green pluses; their dialogs' titles name them.
- The New pool dialog is one form (design reviewed with Codex): the
pool's type as radio cards, as the VM create page chooses its disk
source (their style moves to webvirtcloud.css), one name, and only
the chosen type's fields, the others hidden and disabled.
- A directory's or a share's mount path follows the name
(/var/lib/libvirt/<name>) until it is edited: no default path of
another pool any more.
- ISO images is a directory preset named iso; when the host has an
iso pool, a card links to it instead.
- Ceph offers the host's Ceph secrets by their names, not every
secret by UUID; without one it says so and links the Secrets page.
- LVM asks to agree that the device is erased, the server too.
- AddStgPool checks each type's fields, a name or a path another
pool has, an RBD secret that is not one of the host's Ceph secrets,
and the names "." and "..". A refused pool, or one libvirt refuses,
opens the dialog again with what was entered, the reasons beside
the fields and focus on the first; the audit row for a taken name
stays.
- The page lists the volumes first: that refreshes the pool, and libvirt
measures a pool's space only when it is refreshed, so the size and
usage shown were as of the previous refresh.
- A space that cannot be read says so instead of 0 bytes, and the
pool's status, read from the same pool info, no longer fails the
page after it; a stopped pool says its space and volumes are
unavailable until it is started, instead of 0 bytes and nothing.
- The API's pool is measured after the same refresh, and a stopped
pool lists no volumes there instead of failing.
- A clone the job refuses (a name in use, a volume gone) is a message
on the page, not a server error.
- An ISO image is recognised by its name (storages.jobs.is_iso):
libvirt calls its format raw, so the template's "iso" check never
disabled its Clone button. The clone job refuses one too; the upload
uses the same rule.
- One clone dialog serves every volume, filled and reset by the button
that opens it, instead of one dialog per volume in the page; its
fields have labels and its title names the dialog.
- Volume rows are searched by name only (data-search), with a message
when none matches, in a live region for screen readers; names show
in full. The search script loads only
with the volume table: on a stopped pool's page it failed for want
of a search box. An empty pool says "This pool has no volumes".
- The unused wvmStorage.get_volumes_details goes: update_volumes is
the same.
libvirt measures a pool's size and free space only when the pool is
refreshed and keeps those figures until the next refresh. The pool
lists read them without a refresh, so they showed a pool's space as of
whenever libvirt last refreshed it: two hosts sharing one pool's
storage told different free space for it, each its own refresh's. On a
test host, a 1 GiB file left libvirt's free space unchanged while df
showed 1 GiB less, until the pool was refreshed.
get_storages_info refreshes each active pool before reading it; a
refresh libvirt refuses (while a volume is cloned in the pool) leaves
the last figures, as the pool pages already do. A refresh scans the
pool's volumes, so pools are read only where one host's are shown: a
host's overview (views.host_pools, its Storage card) and its Storages
page and API. The Computes list and the new-VM dialog's host lines,
which read every host at once, no longer show pools; Compute.capacity
is the vCPUs and memory given.
A host the panel could not reach made its overview the 500 page,
without the host's sections, and the Computes list gave such a host an
Overview button that led nowhere. The page now keeps the host's name,
sections, "Edit connection" and "Remove from panel" (the existing
confirmation), and says "Not connected" with the reason and a "Try
again". Details that cannot be read are said in an alert; the VMs,
capacity and load still show, as they are read on their own.
A reachable host's page leads with what it runs and what it gave:
- its VMs by state (running, shut off, paused, other), linked to
Instances;
- the vCPUs, memory and storage pools given, as on the Computes list,
which now shares those parts (computes/capacity_*.html) and their
preparation (views.shown_capacity) with it;
- CPU and memory in use, side by side, with the current reading in
words, a note on what the charts hold and when they were last
updated, or since when not; memory in GB like the rest of the page;
- Hardware and Software and connection: logical CPUs and clock from
virNodeGetInfo, but physical cores, sockets and NUMA nodes counted
from the CPUs of the capabilities' NUMA cells, as virNodeGetInfo
makes a topology up for hosts it cannot describe (asymmetric NUMA);
the hypervisor's own name and version, libvirt, emulator, the guest
architectures as text instead of menus of dead links. A host without
sysinfo shows no processor instead of failing.
Empty notes no longer show "None"; labels stack over their values on a
phone instead of running into them.
Pools that cannot be read no longer drop a host's vCPUs and memory from
its capacity: the storage part says so. get_capacity also counts the
VMs by state.
The page's "listens only on its host" check read the VM's next-start
definition, while novncd connects to the running VM's listener: after a
listen address change on a running VM, the page refused a console novncd
could reach, or let through one it could not. The page now reads the
running VM's listener, as novncd does, with the same loopback test, which
moves to vrtManager.util.
A VM defined with QEMU's own VNC websocket (graphics websocket='...',
which the panel never sets) made the console page connect to that port on
the panel's host name: the port is on the compute, so the console did not
open unless the panel ran on that compute, and then it bypassed novncd and
the panel's console token. Such a VM has its ordinary VNC port too, and
novncd now reaches it there like any other VM.
- An API volume takes the name and size the web form takes. Its name went
into the volume XML unchecked, so a name could add elements such as a
backing store pointing at another VM's disk; the name is also escaped
there now. A size of 0 and metadata preallocation on a non-qcow2 volume
are refused or dropped, as on the web form.
- An API compute update with an empty or null password keeps the stored
one, as the web form does; it emptied it and cut the host off.
- The architectures endpoint answers 404 for an unknown compute instead of
500; an unrouted copy of it is removed.
- The create form refuses a name the host already defines. Defining it
again replaced that interface's configuration, for example the host's
own uplink when a bridge was named after it.
- An interface that does not start is undefined again, so the name is
free for another try; the name check above makes this safe.
- A network created with fixed addresses gets one per address of its DHCP
range for any subnet; the old prefix cut assumed a gateway ending in .1
and built addresses such as 10.0.0.1.130. Fixed addresses need a /24 or
smaller subnet.
- A new network that does not start (its subnet is in use) is undefined
again, so the name is free for another try.
- Fixed addresses are changed and deleted on a stopped network too: the
running network is changed only while it runs. A host with only a name
is deleted as defined, not with an empty MAC, shows no "None", and has no
edit button it could not use.
- The create dialog disables the fields it hides, so an IPv6 subnet typed
and then unchecked is not created, and switching from MACVTAP back to
BRIDGE restores the bridge label and the Open vSwitch option.
- Isolated networks show QoS; QoS save buttons no longer raise a script
error; saving an unchanged fixed address says so; two messages lose a
stray backslash and spaces.
- Deleting a rule removes the row clicked, by its position, instead of the
first rule with the same action, direction and priority; a filter changed
since the page was read is refused instead of losing another rule.
- An added rule is added as entered, with all its attributes. It was merged
into a rule with the same action, direction and priority, where libvirt
keeps only the first protocol, so the new rule was silently dropped.
- A new filter shows in the list after it is created.
- libvirt refuses to refresh a pool while a volume is cloned in it. The pool
page, the volume list of the VM and create pages, upload planning and the
API no longer fail on that refusal; they use the list libvirt has.
- A new pool that does not start (unreachable NFS server, a device LVM
cannot use) is undefined again, so the name is free for another try.
- A pool reporting no size, such as an iSCSI pool without LUNs, shows its
page instead of a division error.
- Each clone dialog shows its own format and metadata rows, so a format
is never shown without Convert ticked and silently ignored.
- The new-volume size is labelled in GiB and is at least 1; an inactive
pool shows no "None" volume count.
When the guest agent failed, the Guest Info section stayed empty with no
word: the request's error answer was not handled. An agent without the
time zone or host name command lost the OS details it had answered too.
The section now shows the agent's error, and a missing command leaves out
only its own details.
Only external snapshots had their name checked. An internal one could be
taken with an empty name: libvirt named it, the job and its log row named
nothing, and a recovery looked for "" and marked the job failed though the
snapshot existed. Both kinds now pass the same check when queued, and the
internal form asks for a name as the external one does.
Snapshot dates showed no year, so last year's snapshot looked like this
year's in the list one reverts from; they now read 2026-10-13 23:04:00
under "Date (time zone)", as on the Jobs page.
Cloud images read their first-boot settings with cloud-init. The panel
served them only over HTTP, which a VM reaches only with the network
and a reverse DNS name for its address. A new VM can now carry them
itself: Cloud-init seed (Advanced) on the create form, or cloud_init in
the API.
The job writes a NoCloud seed, an ISO labelled cidata, into the disk's
directory pool as cidata-<uuid>.iso and puts it in the VM's CD-ROM
drive. Its meta-data holds the VM's UUID as instance-id and its name as
hostname, written as JSON so a VM named 123 or yes keeps a string
hostname; its user-data is what the HTTP datasource serves, with the
creating user's SSH keys. The ISO is built with pycdlib and written
through a libvirt stream, as the NVRAM copy is, now one helper for both.
A seed needs a CD-ROM bus and a directory pool, else the create is
refused. A failed create deletes the seed with the new disk, recovery
names one left behind, and deleting the VM with its disks deletes its
seed, found in the pools by name even when ejected. A clone's drive is
left empty: the seed is the source VM's identity.
A quiesced snapshot and a live clone freeze the guest's file systems
through libvirt, which asks the agent without a timeout: with the agent
hung, the job waited, holding the VM, with no end.
The agent must now first answer a guest-ping within 10 s; a frozen or
dead agent fails the job in seconds, before anything is frozen. The
freeze itself stays libvirt's, without a timeout: a timed freeze was
tried and left the guest frozen, since the freeze still ran in the
guest when the agent came back, after its thaw had failed.
The IP search and the VM report read each running VM's addresses and
OS from its guest agent with interfaceAddresses() and guestInfo(),
which wait for a hung agent indefinitely. The search answered by its
deadline, but the thread stayed blocked, counted against the search
thread limit and held up the worker's exit.
They now use the 10 s agent command the VM page uses, shared as
vrtManager.instance.agent_command() and agent_interfaces(). With the
agent frozen, a search answers in 5 s from the leases and the ARP
table, counts the VM unread, and its thread ends about 5 s later.
The VM page read the guest's addresses with interfaceAddresses() from
the agent, and the OS details with agent commands without a timeout.
A connected agent that hangs (a frozen guest) kept the page from
loading at all and held a worker: seen still loading after 120 s.
Both now go through the 10 s guest agent command the root password and
SSH key use. The addresses come from guest-network-get-interfaces, in
the form the page's address code already reads; an agent that does not
answer leaves the ARP address. With the agent frozen the page loads in
about 10 s and the OS details answer with the agent's error (400) in
5 s, instead of a server error.
The Access tab's Root Password and SSH Keys worked only on a shut-off
VM, through gstfsd on the compute. A running VM whose QEMU guest agent
is connected now gets them through the agent: guest-set-user-password
with the SHA-512 crypt hash, and guest-ssh-add-authorized-keys adding
the key to root's keys. A shut-off VM still goes through gstfsd; any
other VM is refused with "Shut the VM down, or start its QEMU guest
agent, and try again", and the buttons are disabled.
Each is one agent command with a 10 s timeout. libvirt's own calls for
them (setUserPassword, authorizedSSHKeysSet) wait for a hung agent
indefinitely, holding a worker and the VM's lock, and the domain's
agent timeout would change every other agent call of the VM too.
The agent's or libvirt's error is shown as is through error_text, so
users who do not see the hosts get no connection details, and the
attempt is logged as failed. The README names the SELinux boolean a
RHEL-family guest needs before its agent may add SSH keys.
The capacity read lived in its own module with raw libvirt calls and a
thread pool with a deadline, beside helpers that already read the same
things. It now uses them:
- wvmHostDetails.get_capacity() sums the vCPUs and memory of all and of
the running VMs from get_host_instances(), against the host's info.
- get_storages_info() also gives each pool's free space.
- Compute.capacity joins the two, like cpu_count and ram_size, and is
None when the host is down or the read fails.
The page reads the hosts one after another, as it already connected to
each of them; a host that cannot be reached is given up after the
connect timeout. computes/capacity.py and its thread handling are gone.
The page looks and sorts as before.
The live suite run against v3.1.0 on two Vagrant computes (TCP and SSH,
TLS, a socket inside compute1) found two tests that no longer held, and
nothing else:
- A SATA disk added to a running VM is refused by libvirt; since
90c148d a refused form goes back to its page with the reason instead
of a 500. The test expected the 500; it now expects the redirect and
the message, and still checks that neither definition changed.
- The NVRAM copy test built its libvirtError("define failed") and
matched that text, but libvirt-python gives a new libvirtError the
message of the last error its thread recorded: in the socket run a
connection of an earlier live test was closed by then ("client socket
is closed"). The test now checks that its own error object is raised.
Every change to a filter (a rule or reference removed or added, the XML
edited) undefined it and defined the new XML. libvirt refuses to
undefine a filter a running VM uses, so none of these worked on such a
filter; on an unused one a refused definition was undone by defining
the old XML without its UUID, so the filter came back as another one.
The filter is now defined again with its own UUID, which libvirt does
in place, while VMs use it too; XML it cannot parse or apply to the
running VMs is refused and reported. The XML editor shows the UUID.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
On a running network the change did nothing, yet the page said the
range was changed; a network without a range or an unknown address
family ended in a server error. Each is refused now with the reason:
stop the network first, or the network has no such range.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Stopping a network cut the running VMs on it off, deleting one or a
secret kept the VMs that name it from starting, and stopping a pool
took the disks of running VMs away, all without a word. Each is now
refused with the VMs (and, for a secret, the pools) that need it:
stopping while a running VM uses it, deleting while a VM's definition
names it. A disk given by its file path does not need its pool's
definition. The API's pool stop is refused the same way.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A network's QoS form whose rate was not a whole number (abc, 1.5) made
wvmNetwork.set_qos raise a ValueError that the view did not catch: the
request ended in a server error. The page's pattern stops this in a
browser, but the server must refuse it too. set_qos now says "QoS rates
must be whole numbers", and the view reports that, as it does a libvirt
error, and goes back to the network's page.
The edit dialog of a secret was filled with its current value, so every
readable secret's value was in the secrets page's HTML. A private
secret, or one with no value yet, cannot be read: its field held the
text "None", which is valid base64, and saving the dialog unchanged set
the secret to the three bytes it decodes to. The dialog now only writes
a new value: the field starts empty, is a password field and is
required. The page no longer reads secret values, and get_secret_value,
used only for that, is gone.
get_secret_value returned bytes, so the edit dialog showed b'cHc=' (the
bytes' repr) for the base64 value cHc=. Saving the dialog as shown fed
"b'cHc='" to b64decode, which dropped the quotes and the b and stored
other bytes: the secret silently changed (pw became m\xc1\xdc). The value
is now base64 text, and set_secret_value decodes with validate=True, so
a value that is not base64 is refused with a message instead. The field
had an invalid pattern ([a-zA-Z0-9]$+, ignored by browsers) and a 45
character limit; it takes base64 of any length.
create_storage_ceph and create_storage_netfs wrote the pool, host, user,
secret and format values into the pool XML unescaped and unchecked: the
page's patterns were the only guard, and a direct POST could break or
extend the XML. The values now go through util.xml_escape, as the
network code does. The page's host fields stopped at 20 characters, so
nfs01.storage.example.com could not be typed: they take a host name's
253; the Ceph pool and user fields lose the limit the server never had.
create_secret wrote the usage value into the secret XML with an f-string,
unchecked: a quote, "<" or "&" broke the XML or added to it. The page's
pattern ([a-z0-9. ]+) was the only check and refused real values: a
volume secret's path ("/") and an iSCSI IQN ("-", ":"). The XML is now
built with lxml, so the value is text whatever it holds, and the input
keeps only required and the form's 100 characters; libvirt reports a
value it does not take.
A live test creates a volume, an iSCSI and a Ceph secret with real
values through the page.
create_storage_netfs started the pool without a build, so a netfs pool
whose target directory was missing failed to mount ("mount point ... does
not exist"): the page showed the error and the pool stayed defined and
inactive. It now starts with VIR_STORAGE_POOL_CREATE_WITH_BUILD, as the
dir and logical pools do, which makes the mount point.
The Vagrant computes export /srv/wvcnfs to 127.0.0.1, and the live pool
test creates an NFS pool on it at a missing mount point when
TEST_LIBVIRT_NFS_EXPORT is set.
create_storage built only logical pools, so a dir pool whose target path
was missing failed to start ("cannot open directory"): the page showed the
libvirt error and the pool stayed defined, inactive and without autostart.
The pool is now started with VIR_STORAGE_POOL_CREATE_WITH_BUILD, which
makes the directory, or for a logical pool the volume group as the
separate build call did.
A live test creates a dir pool at a missing path on the storages page;
the LVM live test still creates its logical pool the same way.
With the netcf backend (RHEL/AlmaLinux 8), undefining a bridge also
removes its members' configuration: the device came back without any
after a reboot. Like virsh iface-unbridge, each member is now defined
again on its own after the bridge is undefined, with the bridge's start
mode and, when it is the only member, its addresses. A bond keeps its
mode and devices.
Checked on AlmaLinux 8 (libvirt 8.0, netcf): an ethernet and a bond
member get their ifcfg back, and the bond comes up with the address
after a reboot.
libvirt's logical pool cannot change a volume's capacity, so every
resize of such a disk ended in a 500. Disks are resized one at a time;
VIR_ERR_NO_SUPPORT becomes a message naming the disk, and the other
disks still grow.
A live test creates an LVM pool from the storage page on a spare disk
(TEST_LIBVIRT_LVM_DEVICE; the Vagrant computes get /dev/vdb), attaches
new and existing volumes to stopped and running VMs as block disks, and
checks the refused resize in every state.
The serial console test names its compute and VM per connection type, so
the TCP and SSH host can be the same machine. The shut-off migration
fakes reset libvirt's last error first: a libvirtError takes the message
of an earlier real error in the thread, which a live test can leave.
Settings > Console gets a Console type field. Serial removes the VM's
graphics device (adding a pty console when there is none); VNC adds the
graphics device new VMs get, on localhost, and then applies the form's
VNC fields, so an administrator can open it to all interfaces for a TCP
compute. Serial is offered only while SERIAL_CONSOLE_ENABLED is on.
The move copies the VM's NVRAM file to the destination with libvirt
streams (unless both hosts share the NVRAM directory) and removes the
copy if the move fails; the source's file goes with the existing
cleanup. The undefine keeps the file, as libvirt refuses to undefine a
VM with NVRAM otherwise. A VM with TPM state is still refused.
libvirt's backup copies the disks of a running or paused VM from one
instant into new volumes while it keeps running; the clone is defined
shut off as before. The VM is held for the copy, the copy can be
cancelled, and recovery reads the job's records and libvirt.
The clone's definition is one method for both paths; wvmInstance can check,
start, follow, read and abort a push backup of a VM's disks into new
volumes, and freeze/thaw the guest.
