- A DHCP leases card on the page of a network that serves DHCP: each
lease's address, MAC or an IPv6 client's DUID, the host name the client
sent, the VM whose card has that MAC, linked, and when it ends.
- A lease that is a fixed address is marked; any other in one of the
network's DHCP subnets has a Make fixed button that fills in the fixed
address dialog with its address, MAC or DUID and name.
- Leases that cannot be read are said on the card; the rest of the page
stays. A network that does not run has none.
- The VMs on a network are read with the MACs of their cards on it, from
the definitions already read.
Plan reviewed with Codex; libvirt's behaviour checked on a host.
- A filter is not deleted while a VM's interface references it, as the
VM runs or as saved for its next boot (a stopped VM too), or while
another filter references it: libvirt refuses only one a running VM
uses, and a VM using a filter that references a deleted one does not
start. The VMs are read from one listing, one or two XML reads each,
instead of a connection per VM; the refusal names them.
- Create refuses a name or UUID the host has, clone a name in use or
one outside the panel's names, and editing the XML must keep the
filter's name and UUID: each would replace another filter or make a
copy. Entered XML is read for these checks without expanding entities
or taking a DTD (util.parse_xml, shared with the network editor),
and a rule is one <rule> element.
- A rule or reference is deleted only while it reads as the page showed
it, not by index and three attributes: a rule alike in those or a
filter changed meanwhile loses nothing.
- A reference is added only to another filter of the host not
referenced yet; the picker offers those.
- References keep their parameters, in order (a name may repeat); a
rule shows every protocol element it has, a rule without one too.
- One change a POST (two would both start from the page's reading,
the second undoing the first); every change redirects and reports its
refusal as a message, a POST for a filter gone meanwhile going to the
list; the catch-all that showed any error goes, and so does
wvmInstance.get_filterrefs, which only the old delete check used. The list reads each filter's
XML once from one listing; a filter's page reads its XML once and
only the other filters' names; the per-filter XML dialog of the list
goes (a filter's page shows its XML). The XML editors send their text
untouched too.
As the storage pages; reviewed with Codex.
- The list is a card per network: its name with Active or Stopped and
Autostart badges, its type (network_mode: Isolated, NAT, Routed,
Open, Bridge, Macvtap, SR-IOV), its device, and each address with
its DHCP range; a bridge or macvtap network's addresses come from
the outside network.
- A network's page: its heading starts or stops it, the menu sets
autostart and deletes a stopped one. A Network card tells its state,
type, bridge or interface, MAC and what the type does; a card per
address (every <ip>, each with its DHCP range dialog, which libvirt
takes on a stopped network); its fixed addresses of every subnet in
one table, searched, each with Edit and Delete, one dialog adding
and editing them; the VMs whose definition names it, connected or
configured, linked (wvmNetwork.get_vms, one domain listing, a VM
undefined meanwhile left out); its
bandwidth limits where libvirt sets them (not on macvtap or SR-IOV
networks), in KiB/s, from the saved definition with a note that a
running network takes them when restarted; its XML in an accordion.
The page reads the running and the saved definition once each, and
only to render itself: its actions, which all redirect, read nothing
of it first.
- The New network dialog is one form, as the New pool one: the type
as radio cards (the radio_card.html include, now shared by both),
the chosen type's fields only, IPv6 with its box, a bridge or
interface suggested from the host's (get_host_interfaces, not the
bridges libvirt made for its own networks); a refused network or
one libvirt refuses opens the dialog again with what was entered,
the reasons beside the fields and focus on the first.
- What the New pool and New network dialogs share is one script,
static/js/choice_dialog.js: the radio cards show their fieldsets
(data-kinds) and a refused form opens again focused on its first
refused field; each dialog keeps only its own changes.
- The fixed-address dialogs per family go to the page's own dialog.
Reviewed with Codex against libvirt's network format and driver.
- Addresses: wvmNetwork found a network's <ip> by its text, so one
written as <ip .../> or <ip><dhcp>... without whitespace had none,
and a second address of a family overwrote the first. ip_networks
reads every <ip> in order, its index being libvirt's parentIndex:
family (ipv4 when written), address, subnet, DHCP (a <dhcp>, also
with fixed addresses only), first range and fixed addresses. The
parentIndex was guessed from the number of families, wrong when IPv6
comes first; changes now name the address by its index.
- One read: the page read the network's XML once per getter, ten or
more round trips; it reads it once (a cached_property of the
request's wvmNetwork). A change starts from the saved definition
read anew (VIR_NETWORK_XML_INACTIVE), not the running one: two QoS
changes on a running network no longer undo the first. The XML
editor shows and changes the saved definition, and defines this
network only (its name, and its UUID if given), read for that with
no entity expanded and handed to libvirt as written; an XML declaring
its encoding is taken. The actions go back to the network's page by
its own URL.
- Fixed addresses are found by the address they had (a hidden field),
not by the editable box: changing it and pressing Delete deleted
another entry or none. A change deletes the entry and adds it anew
from a copy, keeping what the page does not show (a client id, a
lease), and puts it back if the add fails: libvirt's own change
finds an entry by any of its MAC, address or name, so it could
replace another entry, and never by an IPv6 DUID. The address must
be of the subnet, not the host's, and neither it, the MAC or DUID
nor the name another entry's; an entry gone meanwhile is refused,
not added anew; an unchanged one writes no audit row. They can be
added while the network is stopped; a running network saved with
other addresses than it runs with is not changed live, as
parentIndex would name another <ip> of it.
- An address without a netmask or prefix takes libvirt's (IPv4 its
class's, IPv6 /64), for its checks and the overlap check.
- The DHCP range must be in the subnet, in order and not take in the
host's address.
- The create form takes a known mode only ("bogus" made an isolated
network, a missing one a server error); NAT and routed networks need
an IPv4 subnet, an isolated one may have none, a bridge or macvtap
network needs its bridge or interface and gets no addresses; IPv6
only with its box (whose value was "false", so never); no name or
subnet of another network of the host. "Fixed Addresses" at create
goes: it made a random-MAC entry for every address of the range,
for no real VM.
- Refusals of a fixed address, the DHCP range, the XML and a QoS
removal are messages, not server errors.
- The IPv6 forwarding of a bridge or macvtap network is the outside
network's, not ROUTE.
- get_networks_info reads each network's XML once and gives its
autostart and addresses too. Unused can_pxe, DHCP lease helpers,
get_uuid and the per-family range and host getters go.
- A network created with fixed addresses gets one per address of its DHCP
range for any subnet; the old prefix cut assumed a gateway ending in .1
and built addresses such as 10.0.0.1.130. Fixed addresses need a /24 or
smaller subnet.
- A new network that does not start (its subnet is in use) is undefined
again, so the name is free for another try.
- Fixed addresses are changed and deleted on a stopped network too: the
running network is changed only while it runs. A host with only a name
is deleted as defined, not with an empty MAC, shows no "None", and has no
edit button it could not use.
- The create dialog disables the fields it hides, so an IPv6 subnet typed
and then unchecked is not created, and switching from MACVTAP back to
BRIDGE restores the bridge label and the Open vSwitch option.
- Isolated networks show QoS; QoS save buttons no longer raise a script
error; saving an unchanged fixed address says so; two messages lose a
stray backslash and spaces.
Follow-ups from the review of the audit log layers:
- Blocking a user who is already blocked, or unblocking one who is
not, changes nothing and now writes no row, like any other edit
that changes nothing.
- write_chunk takes the request instead of the user and an optional
request; the view always had one, so the branch only tests used
is gone and every chunk 0 goes through the same audited submit.
- Tests: a busy clone creates no job and its row carries the page's
message; a later chunk that fails writes no submit row; libvirt
refusing a network or pool delete is a failed row.
The create forms of networks and storage pools checked the new name
against the host's list of networks or pools, but that list holds one
dict per object, so the name never matched and the check never fired;
libvirt refused the duplicate with its own wording. The check now
compares names: the page shows its own message, nothing is sent to
libvirt, and the Logs page gets a failed row "...: add: name already
in use".
The Logs page now records every change an admin makes to a compute's
libvirt objects, with the compute's name in the host column:
- networks: add, start, stop, delete, autostart, DHCP range, fixed
addresses, QoS and XML edits;
- storage pools: add, start, stop, delete, autostart, from web and
API; volumes: add and delete (web and API), clone and ISO upload;
- host interfaces: add, start, stop, delete;
- secrets: add, set value (never the value), delete;
- network filters: add, clone, delete, XML edits, rules and
references.
A refused or failed change is a failed row with its reason (libvirt
text through safe_text). The volume clone and upload jobs write their
row when they end; a refused submission is a failed row at once. A
volume row names the volume libvirt created (a dir pool adds .qcow2 or
.img). Volume create or delete through the API on an inactive pool
(409) is a failed row.
Network filters: the rows read "Network filter f1: add" instead of
"f1 network filter is created", and their host is the compute's name
instead of its hostname. A duplicate name or UUID no longer raises a
bare exception, and a filter XML that cannot be parsed no longer ends
in UnboundLocalError.
On a running network the change did nothing, yet the page said the
range was changed; a network without a range or an unknown address
family ended in a server error. Each is refused now with the reason:
stop the network first, or the network has no such range.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Stopping a network cut the running VMs on it off, deleting one or a
secret kept the VMs that name it from starting, and stopping a pool
took the disks of running VMs away, all without a word. Each is now
refused with the VMs (and, for a secret, the pools) that need it:
stopping while a running VM uses it, deleting while a VM's definition
names it. A disk given by its file path does not need its pool's
definition. The API's pool stop is refused the same way.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A network's QoS form whose rate was not a whole number (abc, 1.5) made
wvmNetwork.set_qos raise a ValueError that the view did not catch: the
request ended in a server error. The page's pattern stops this in a
browser, but the server must refuse it too. set_qos now says "QoS rates
must be whole numbers", and the view reports that, as it does a libvirt
error, and goes back to the network's page.
The create-network form only checked the characters of its subnets, so
192.0.2.0/33 or 999.0.2.0/24 passed and network_size raised a
ValueError: the user got a server error instead of a message. So did a
subnet too small for the gateway, DHCP range and broadcast address that
network_size derives (0.0.0.0/32, 255.255.255.255/32), and 192.0.2.0/31
or a bare address gave an inverted DHCP range.
Each subnet field now parses its value as a network of its IP version
and refuses it with a field error otherwise. An IPv4 prefix must be /30
or shorter; the IPv6 prefix must be /64, which the view checked after
the form and now the form does.
The MAC field's pattern ([0-9/:]+) had no hex letters, so the browser
refused nearly every MAC address (52:54:00🆎cd:ef) and no IPv4 fixed
address could be added from the page. The host name field of both
dialogs ([a-zA-Z0-9_]+) refused names such as web-01 or db.lan. The MAC
takes hex digits and ":", the name letters, digits, "_", "." and "-";
the server already escapes both into the network XML.
