Guus Sliepen
d5b56bbba5
Disable PMTUDiscovery in switch and hub modes.
...
In switch and hub modes, tinc does not generate ICMP packets in response to
packets that are larger than the path MTU. However, if PMTUDiscovery is
enabled, the IP_MTU_DISCOVER and IPV6_MTU_DISCOVER option is set on the UDP
sockets, which causes all UDP packets to be sent with the DF bit set, causing
large packets to be dropped, even if they would otherwise be routed fine.
2009-03-09 13:48:54 +01:00
Guus Sliepen
78fc59e994
Update THANKS and copyright information.
2009-03-05 14:12:36 +01:00
Guus Sliepen
503c32eb0e
Use a global list to track outgoing connections.
...
Previously an outgoing_t was maintained for each outgoing connection,
but the pointer to it was either stored in a connection_t or in an event_t.
This made it very hard to keep track of and to clean up.
Now a list is created when tinc starts and reads all the ConnectTo variables,
and which is recreated when tinc receives a HUP signal.
2009-01-20 13:12:41 +01:00
Guus Sliepen
a7e793c94e
Add missing cleanup functions in close_network_connections().
2009-01-19 23:17:28 +01:00
Guus Sliepen
a39a9506cd
Move free()s at the end om main() to the proper destructor functions.
2009-01-09 12:36:06 +01:00
Guus Sliepen
0e4d419aae
Enable PMTU discovery by default.
2008-12-22 20:35:45 +00:00
Guus Sliepen
1bb5a284fe
Make sure resolved addressed for outgoing connections are freed, if there are any.
2006-11-29 16:57:46 +00:00
Guus Sliepen
0714ac6c59
Nodes use events, so event system should be initialised first and destroyed last.
2006-11-11 22:44:15 +00:00
Guus Sliepen
1728d5b2c4
The "active" bit in node.status is not used.
2006-11-11 13:43:00 +00:00
Guus Sliepen
f88c9942e1
Use memcpy() to copy sockaddrs returned by getaddrinfo().
...
Thanks to Miles Nordin for spotting this.
2006-06-11 18:53:27 +00:00
Guus Sliepen
de78d79db8
Update copyright notices, remove Ivo's email address.
2006-04-26 13:52:58 +00:00
Guus Sliepen
af95368c0f
Fix signedness compiler warnings.
2006-03-19 13:06:21 +00:00
Guus Sliepen
a90f1b652c
Make sure $NAME is set correctly when executing tinc-down script.
2006-02-06 12:30:51 +00:00
Guus Sliepen
228e7a5c8f
Apply patch from Scott Lamb adding an output buffer for the TCP sockets.
...
This helps coalescing multiple send_meta() commands into one TCP packet.
Also limit the size of the output buffer before dropping PACKETs.
2006-01-19 17:13:18 +00:00
Guus Sliepen
df3220a154
Update copyright notices.
2005-05-04 18:09:30 +00:00
Guus Sliepen
c46f56a8b8
subnet-up/down hooks
2004-12-01 20:06:05 +00:00
Guus Sliepen
4fe7aff4d1
Add BlockingTCP option, useful when using TCPOnly on slow or congested links.
2004-11-10 21:56:31 +00:00
Guus Sliepen
7926a156e5
Update copyrights, links, email addresses and let Subversion update $Id$ keywords.
2004-03-21 14:21:22 +00:00
Guus Sliepen
af86a3226e
Revert Martin Kihlgren's patch, it doesn't work the way it should.
2004-03-20 22:23:42 +00:00
Guus Sliepen
56aad1bb48
Applied Martin Kihlgren's IdentityGenerosity patch,
...
simplified and renamed to StrictSource.
2004-03-20 15:28:55 +00:00
Guus Sliepen
a92c471a2b
Only read our public key if it wasn't already in the private key file.
2004-03-15 18:15:02 +00:00
Guus Sliepen
6d41b429a2
Better name, show probed MTU in dump.
2003-12-20 21:25:17 +00:00
Guus Sliepen
9bab08e972
More sensible name, and try to set PMTU discovery on IPv6 sockets as well.
2003-12-20 21:09:33 +00:00
Guus Sliepen
6b12bea62f
Let tinc figure out the exact MTU of the link.
2003-12-20 19:47:53 +00:00
Guus Sliepen
25447b3841
Read MaxTimeout from tinc.conf like the manpage says.
2003-12-07 14:28:39 +00:00
Guus Sliepen
e3220cacb5
Replace Opaque and Strict options with a TunnelServer option.
2003-11-17 15:30:18 +00:00
Guus Sliepen
a1ab57e275
Check all EVP_ function calls.
2003-10-11 12:16:13 +00:00
Guus Sliepen
6c5f3d8b74
We don't have to tell GCC how to cast.
2003-08-28 21:05:11 +00:00
Guus Sliepen
7ed2559025
Fix permissions check for rsa_key.priv.
2003-08-14 14:21:35 +00:00
Guus Sliepen
9bde92ce97
Simpler checking of permissions on private RSA key and other fixes.
2003-08-08 22:11:54 +00:00
Guus Sliepen
fcbe29bc4c
No C99 initialisers, gcc 2.95.3 doesn't like it.
...
Also make sure getopt.h is included.
2003-07-30 11:50:45 +00:00
Guus Sliepen
721e4caee0
Native Windows support.
2003-07-29 22:59:01 +00:00
Guus Sliepen
5cb1471351
Don't initialise a CIPHER_CTX if cipher == NULL.
2003-07-23 22:17:31 +00:00
Guus Sliepen
4aadb9500d
Run setup_device() after parsing configuration but before claiming we're ready.
2003-07-22 21:13:23 +00:00
Guus Sliepen
eefa28059a
Use bools and enums where appropriate.
2003-07-22 20:55:21 +00:00
Guus Sliepen
123bb765d1
Use iface instead of interface because it might already be declared in
...
system header files.
2003-07-18 13:45:06 +00:00
Guus Sliepen
e449d94cae
Big header file cleanup: everything that has to do with standard system
...
libraries is moved to system.h.
2003-07-17 15:06:27 +00:00
Guus Sliepen
5db596c684
Simplify logging, update copyrights and some minor cleanups.
2003-07-12 17:41:48 +00:00
Guus Sliepen
0b9175e998
Define logger(), cleans up source code and allows us to write log entries
...
to a separate file.
2003-07-06 22:11:37 +00:00
Guus Sliepen
9528a63c35
Really make tinc default to any addressfamily.
2003-06-25 20:52:59 +00:00
Guus Sliepen
c70f52087b
- Per-node EVP_CIPHER_CTX to avoid initialisation overhead.
...
- LZO compression, thanks to Teemu Kiviniemi.
- Updated dutch translation.
2003-05-06 21:13:18 +00:00
Guus Sliepen
9792ba2cac
- Avoid memory leak caused by OpenSSL 0.9.7a.
...
- Disable RSA_blinding_on() because it segfaults.
2003-03-28 13:41:49 +00:00
Ivo Timmermans
2fff0a91a7
Call RSA_blinding_on(), as advised in the paper on
...
http://crypto.stanford.edu/~dabo/abstracts/ssl-timing.html
to offer some resistance against timing attacks.
2003-03-14 09:43:10 +00:00
Guus Sliepen
38f562fdfc
Add $NAME for tinc-up/down scripts.
2003-01-14 12:53:59 +00:00
Guus Sliepen
5eca9520d9
Small fixes so tinc compiles out of the box on SunOS 5.8
2002-09-15 14:55:54 +00:00
Guus Sliepen
6f9f6779e6
Remove redundant spaces.
2002-09-09 22:33:31 +00:00
Guus Sliepen
f75dcef72a
Switch to K&R style indentation.
2002-09-09 21:25:28 +00:00
Guus Sliepen
5fc1ed17f4
Cleanups:
...
- Convert cp to cp(); so that automatic indenters work.
- Convert constructions like if(x == NULL) to if(!x).
- Move all assignments out of conditions.
2002-09-09 19:40:12 +00:00
Guus Sliepen
82ebfc923d
Revert to edge and graph stuff. This time, use a directed graph.
2002-09-04 13:48:52 +00:00
Guus Sliepen
d134c4542d
Drop graph and edge stuff. Use new node stuff instead.
2002-09-03 20:43:26 +00:00