mirror of
https://github.com/strfry/rtl8710-stlink-tutorial.git
synced 2024-11-24 06:54:17 +00:00
16 lines
679 B
Markdown
16 lines
679 B
Markdown
# Program rtl8170 (RtlDuino) with STM32 Discovery Board
|
|
|
|
1) Disconnect CN3 Jumpers (inside 'ST-LINK DISCOVERY' label)
|
|
2) Connect to SWD (CN2) pins with jumpwires to rtlduino board (see rtlduino-pinout.png):
|
|
Pin 2 <> CLK
|
|
Pin 3 <> GND
|
|
Pin 4 <> TMS
|
|
(Pin 5) <> TRST
|
|
3) Connect any 5V pin on STM board to 5VDD
|
|
4) Install OpenOCD >= version 0.9, and install gcc-arm-none-eabi
|
|
5) git checkout https://bitbucket.org/rebane/rtl8710/src
|
|
6) Replace in Makefile "interface/stlink-v2-1.cfg" with "interface/stlink-v2.cfg"
|
|
7) Change blinking GPIO to RtlDuino's onboard LED:
|
|
main.c:
|
|
Replace in references to GPIO_PORTA_* (last 3 occurences):
|
|
(((uint32_t)1) << 8) -> (((uint32_t)1) << 6)
|