4.1 KiB
RTL00(RTL8710AF) Test MP3 SDK V3.5.1 GCC
MP3 stereo player V0004
Module RTL00(RTL8710AF), F11AMIM13 (RTL8711AM), F11AFIM13-B1 (RTL8711AF)
PADI (RTL8710AF), F10AFIM13-B1 (RTL8710AF), TinyCon2005-A-BE (RTL8711AF),
WFM-400 (RTL8711AM), WFM-410 (RTL8711AF), WFM-250 (RTL8195AM),
AW-CU238, AW-CU239 (RTL8711AM), AW-CU245, AW-CU245, AW-CU245 (RTL8711AM/RTL8195AM/RTL8711AF),
WG6611 (RTL8711AM), RAK473 (RTL8711AM), RAK474, RAK476 (RTL8711AF), ...
RTL00 module (RTL8710AF)
Толко Тест!
PWM Out GC_2 and PE_2 (2 канала по 96Bit на один исходный sample 48 кГц)
Console command (RX/TX GB1/GB0 38400 baud):
CONSOLE COMMAND SET:<br>
==============================
ATPN=<SSID>[,<PASSPHRASE>[,WEPKEY]]: WIFI Connect to AP
ATWS=<URL,PORT>: MP3 Connect to URL
ATWS=<c>[lose]: Close MP3
ATWS=<r>[ead]: Read MP3 URL
ATWS=<s>[ave]: Save MP3 URL
ATWS=<?>: URL Info
ATWD: WIFI Disconnect
ATST: Memory info
ATLW: Lwip Info
ATSB=<ADDRES(hex)>[,COUNT(dec)]: Dump byte register
ATSD=<ADDRES(hex)>[,COUNT(dec)]: Dump dword register
ATSW=<ADDRES(hex)>,<DATA(hex)>: Set register
ATDS=[TIME(ms)]: Deep sleep
ATON: Open connections
ATOF: Close connections
?: This Help
==============================
По умолчанию, в качестве JTAG используется J-Link STLink V2.
Используемое ПО
JTAG/SWD Drivers:
- ST-Link
- SEEGER J-Link Software and Documentation Pack
- Converting ST-LINK on-board into a J-Link
System: - MinGW
- GNU ARM Embedded Toolchain
- OpenOCD: Open On-Chip Debugger
Eclipse: - Eclipse IDE for C/C++ Developers
- GNU ARM Eclipse Plug-ins
- GNU ARM Eclipse OpenOCD
Изначальные версии для дополнений исходников и SDK:
от PADI IoT Stamp Resources – PINE64:
- sdk-ameba-rtl8710af-v3.5a_without_NDA_GCC_V1.0.0.zip
от Realtek IoT/Arduino Solution: - sdk-ameba1-v3.4b3_without_NDA.zip
из GitHub: - Ameba8195/Arduino: This is Arduino SDK for Ameba Arduino board
Доп.информация: esp8266.ru/forum