b251427643
Fixed reference to unknown environment var Moved drivers into extras folder and added additional documentations. Changed LOCAL to static and renamed DEBUG to BMP180_DEBUG
1.8 KiB
Driver for BMP085/BMP180 digital pressure sensor
This driver is written for usage with the ESP8266 and FreeRTOS (esp-open-rtos and esp-open-rtos-driver-i2c).
Usage
Before using the BMP180 module, the function bmp180_init(SCL_PIN, SDA_PIN) needs to be called to setup the I2C interface and do validation if the BMP180/BMP085 is accessible.
If the setup is sucessfully and a measurement is triggered, the result of the measurement is provided to the user as an event send via the qQueue provided with bmp180_trigger_*measurement(pQueue);
Example
#define SCL_PIN GPIO_ID_PIN(0)
#define SDA_PIN GPIO_ID_PIN(2)
...
if (!bmp180_init(SCL_PIN, SDA_PIN)) {
// An error occured, while dong the init (E.g device not found etc.)
}
// Trigger a measurement
bmp180_trigger_measurement(pQueue);
Change queue event
Per default the event send to the user via the provided queue is of the type bmp180_result_t. As this might not always be desired, a way is provided so that the user can provide a function, which creates and sends the event via the provided queue.
As all data aqquired from the BMP180/BMP085 is provided to the bmp180_informUser function, it is also possible to calculate new informations (E.g altitude etc.)
Example
// Own BMP180 User Inform Implementation
bool my_informUser(const xQueueHandle* resultQueue, uint8_t cmd, bmp180_temp_t temperatue, bmp180_press_t pressure) {
my_event_t ev;
ev.event_type = MY_EVT_BMP180;
ev.bmp180_data.cmd = cmd;
ev.bmp180_data.temperatue = temperatue;
ev.bmp180_data.pressure = pressure;
return (xQueueSend(*resultQueue, &ev, 0) == pdTRUE);
}
...
// Use our user inform implementation
// needs to be set before first measurement is triggered
bmp180_informUser = my_informUser;