924860a78f
Separate method to initialize SPIFFS memory buffers. REDME.md for spiffs component. Simplify spiffs example.
153 lines
3.6 KiB
Markdown
153 lines
3.6 KiB
Markdown
# SPIFFS ESP8266 File system
|
|
|
|
This component adds file system support for ESP8266. File system of choice
|
|
for ESP8266 is [SPIFFS](https://github.com/pellepl/spiffs).
|
|
It was specifically designed to use with SPI NOR flash on embedded systems.
|
|
The main advantage of SPIFFS is wear leveling, which prolongs life time
|
|
of a flash memory.
|
|
|
|
## Features
|
|
|
|
* SPIFFS - embedded file system for NOR flash memory.
|
|
* POSIX file operations.
|
|
* Static files upload to ESP8266 file system within build process.
|
|
* SPIFFS singleton configuration. Only one instance of FS on a device.
|
|
|
|
## Usage
|
|
|
|
In order to use file system in a project the following steps should be made:
|
|
* Add SPIFFS component in a project Makefile `EXTRA_COMPONENTS = extras/spiffs`
|
|
* Specify your flash size in the Makefile `FLASH_SIZE = 32`
|
|
* Specify the start address of file system region on the flash memory
|
|
`SPIFFS_BASE_ADDR = 0x200000`
|
|
* If you want to upload files to a file system during flash process specify
|
|
the directory with files `$(eval $(call make_spiffs_image,files))`
|
|
|
|
In the end the Makefile should look like:
|
|
|
|
```
|
|
PROGRAM=spiffs_example
|
|
EXTRA_COMPONENTS = extras/spiffs
|
|
FLASH_SIZE = 32
|
|
|
|
SPIFFS_BASE_ADDR = 0x200000
|
|
SPIFFS_SIZE = 0x100000
|
|
|
|
include ../../common.mk
|
|
|
|
$(eval $(call make_spiffs_image,files))
|
|
```
|
|
|
|
Note: Macro call to prepare SPIFFS image for flashing should go after
|
|
`include common.mk`
|
|
|
|
### Files upload
|
|
|
|
To upload files to a file system during flash process the following macro is
|
|
used:
|
|
|
|
```
|
|
$(eval $(call make_spiffs_image,files))
|
|
```
|
|
|
|
It enables the build of a helper utility **mkspiffs**. This utility creates
|
|
an SPIFFS image with files in the specified directory.
|
|
|
|
The SPIFFS image is created during build stage, after `make` is run.
|
|
The image is flashed into the device along with firmware during flash stage,
|
|
after `make flash` is run.
|
|
|
|
**mkspiffs** utility uses the same SPIFFS source code and the same
|
|
configuration as ESP8266. So the created image should always be compatible
|
|
with SPIFFS on a device.
|
|
|
|
The build process will catch any changes in files directory and rebuild the
|
|
image each time `make` is run.
|
|
The build process will handle SPIFFS_SIZE change and rebuild **mkspiffs**
|
|
utility and the image.
|
|
|
|
## Example
|
|
|
|
### Mount
|
|
|
|
```
|
|
esp_spiffs_init(); // allocate memory buffers
|
|
if (esp_spiffs_mount() != SPIFFS_OK) {
|
|
printf("Error mounting SPIFFS\n");
|
|
}
|
|
```
|
|
|
|
### Format
|
|
|
|
Formatting SPIFFS is a little bit awkward. Before formatting SPIFFS must be
|
|
mounted and unmounted.
|
|
```
|
|
esp_spiffs_init();
|
|
if (esp_spiffs_mount() != SPIFFS_OK) {
|
|
printf("Error mount SPIFFS\n");
|
|
}
|
|
SPIFFS_unmount(&fs); // FS must be unmounted before formating
|
|
if (SPIFFS_format(&fs) == SPIFFS_OK) {
|
|
printf("Format complete\n");
|
|
} else {
|
|
printf("Format failed\n");
|
|
}
|
|
esp_spiffs_mount();
|
|
```
|
|
|
|
### POSIX read
|
|
|
|
Nothing special here.
|
|
|
|
```
|
|
const int buf_size = 0xFF;
|
|
uint8_t buf[buf_size];
|
|
|
|
int fd = open("test.txt", O_RDONLY);
|
|
if (fd < 0) {
|
|
printf("Error opening file\n");
|
|
}
|
|
|
|
read(fd, buf, buf_size);
|
|
printf("Data: %s\n", buf);
|
|
|
|
close(fd);
|
|
```
|
|
|
|
### SPIFFS read
|
|
|
|
SPIFFS interface is intended to be as close to POSIX as possible.
|
|
|
|
```
|
|
const int buf_size = 0xFF;
|
|
uint8_t buf[buf_size];
|
|
|
|
spiffs_file fd = SPIFFS_open(&fs, "other.txt", SPIFFS_RDONLY, 0);
|
|
if (fd < 0) {
|
|
printf("Error opening file\n");
|
|
}
|
|
|
|
SPIFFS_read(&fs, fd, buf, buf_size);
|
|
printf("Data: %s\n", buf);
|
|
|
|
SPIFFS_close(&fs, fd);
|
|
```
|
|
|
|
### POSIX write
|
|
|
|
```
|
|
uint8_t buf[] = "Example data, written by ESP8266";
|
|
|
|
int fd = open("other.txt", O_WRONLY|O_CREAT, 0);
|
|
if (fd < 0) {
|
|
printf("Error opening file\n");
|
|
}
|
|
|
|
write(fd, buf, sizeof(buf));
|
|
|
|
close(fd);
|
|
```
|
|
|
|
## Resources
|
|
|
|
[SPIFFS](https://github.com/pellepl/spiffs)
|