7c702d7f09
* Get testing system by projectgus working with master HEAD * Fix running dual test. Add basic wifi test * Moved spiff test to a test case. Reset retries in test runner * Add timers test case * test_runner: List test cases and run individual test cases * Add README for tests * Update README.md * Code clean-up * Python3.4 support. README.md update
66 lines
2 KiB
Markdown
66 lines
2 KiB
Markdown
# esp-open-rtos tests
|
|
|
|
Testing is based on [Unity](https://github.com/ThrowTheSwitch/Unity)
|
|
C testing framework.
|
|
|
|
## Features
|
|
|
|
* Single device test case.
|
|
* Dual devices test cases. Run test case on two ESP8266 modules simultaneously.
|
|
* Run only specified test cases.
|
|
* List available test cases on a device.
|
|
|
|
## Usage
|
|
|
|
There's a test runner script `test_runner.py` written in Python3 that runs
|
|
test cases on ESP8266 connected to a host.
|
|
|
|
### Requirements and dependencies
|
|
|
|
* Python3 version > 3.4 `sudo apt-get install python3 python3-pip`
|
|
* pyserial `sudo pip3 install pyserial`
|
|
* ESP8266 board with reset to boot mode support
|
|
* Two ESP8266 for dual mode test cases
|
|
|
|
Test runner is heavily relying on device reset using DTR and RTS signals.
|
|
Popular ESP8266 boards such as **NodeMcu** and **Wemos D1** support device
|
|
reset into flash mode.
|
|
|
|
### Options
|
|
|
|
`--type` or `-t` - Type of test case to run. Can be 'solo' or 'dual'.
|
|
If not specified 'solo' test will be run.
|
|
|
|
`--aport` or `-a` - Serial port for device A.
|
|
If not specified device `/dev/ttyUSB0` is used.
|
|
|
|
`--bport` or `-b` - Serial port for device B.
|
|
If not specified device `/dev/ttyUSB1` is used.
|
|
|
|
`--no-flash` or `-n` - Do not flash the test firmware before running tests.
|
|
|
|
`--list` or `-l` - Display list of the available test cases on the device.
|
|
|
|
### Example
|
|
|
|
Build test firmware, flash it using serial device `/dev/tty.wchusbserial1410`
|
|
and run only *solo* test cases:
|
|
|
|
`./test_runner.py -a /dev/tty.wchusbserial1410`
|
|
|
|
Build test firmware. Flash both devices as `-t dual` is specified. And run both
|
|
*solo* and *dual* test cases:
|
|
|
|
`./test_runner.py -a /dev/tty.wchusbserial1410 -b /dev/tty.wchusbserial1420 -t dual`
|
|
|
|
Do not flash the firmware, only display available test cases on the device:
|
|
|
|
`./test_runner.py -a /dev/tty.wchusbserial1410 -n -l`
|
|
|
|
Do not flash the firmware and run only 2 and 4 test cases:
|
|
|
|
`./test_runner.py -a /dev/tty.wchusbserial1410 -n 2 4`
|
|
|
|
## References
|
|
|
|
[Unity](https://github.com/ThrowTheSwitch/Unity) - Simple Unit Testing for C
|