Commit graph

211 commits

Author SHA1 Message Date
Angus Gratton
6eceb5843c OTA: Move OTA-aware Cache_Read_Enable to core
Otherwise images built with OTA=1 are only OTA-suitable if they also
link rboot-ota.
2016-05-28 11:27:10 +10:00
Angus Gratton
f0db26604f brk/malloc: Allow malloc to fail when out of RAM
Fixes #76.
2016-05-27 12:09:07 +10:00
Angus Gratton
3ba19d7c4e Merge pull request #137 from SuperHouse/feature/better_crash_dumps
Better crash dumps
2016-05-17 09:38:19 +10:00
Angus Gratton
1e9296f60c Fatal exceptions: Cleanly deal with exceptions that occur inside fatal_exception_handler_inner()
In case of heap corruption or some other major problem, dumping details
in the exception handler can cause a crash loop - so fail out if we seem
to be going in circles.
2016-05-17 09:27:31 +10:00
Angus Gratton
981c87899b Add heap information to fatal exception & abort dumps 2016-05-15 22:30:01 +10:00
Angus Gratton
efedd24624 fatal exception handler: Only dump "registers" from stack for fatal user exceptions 2016-05-15 22:30:01 +10:00
Angus Gratton
36886412e6 Add abort() implementation
Also reduces the IRAM footprint of the fatal exception handler, as only
the prelude (which disables interrupts & enables the flash mapping) is
in IRAM now.

Closes #54, relevant to #133.
2016-05-15 22:30:01 +10:00
Angus Gratton
cf350efd8a Dump register state on fatal exception 2016-05-15 22:30:01 +10:00
Angus Gratton
52f9b13faf Break out debug dump functions into their own compilation unit 2016-05-15 22:30:01 +10:00
Angus Gratton
640609c3f5 lwip sys_arch: Add functional xInsideISR implementation
Relies on global flags set when the user ISR is executing.

Unclear if this fixes any bugs as ISR code may not have been calling
into LWIP, but the previous implementation was broken.
2016-05-15 22:30:01 +10:00
Angus Gratton
f9fb0f212c Add stack memory dump to fatal exception handler 2016-05-15 22:24:40 +10:00
Angus Gratton
fd20b1a530 Add PHY hardware management for Bluetooth Coexistence pin choice 2016-05-15 22:21:10 +10:00
Angus Gratton
b61d06e940 Wrap structure around phy_info PHY initialisation settings
Add notes based on testing some of the values found there.
2016-05-15 22:21:10 +10:00
Angus Gratton
fee987d5cf Startup code: Move user_start_phase2 to irom section
This saves 1020 bytes from the text (IRAM) section by preventing
inlining of user_start_phase2() (and dump_flash_config_sectors() as
well) into the IRAM function sdk_user_start().
2016-05-15 22:16:42 +10:00
Angus Gratton
dccc57433d Move static constructor calls to after PHY, clock & baud rate are setup
Otherwise anything printed inside the constructor happens at unexpected baud rate.

Ref #128
2016-04-24 18:52:20 +10:00
Angus Gratton
b61b62136b gcc __attribute__((constructor)): Remove hacked calling, move ctor sections to flash
More hacky moving of parts of .rodata to flash, until we can move all of
it.

Candidate fix for #128
2016-04-24 18:52:16 +10:00
UncleRus
3a62a0af0c esp/gpio.h c++ compatibility 2016-03-22 01:51:50 +05:00
UncleRus
42018f0315 SPI big endian swap bug fix, spi_get_settings()/spi_set_settings() 2016-03-18 03:27:36 +05:00
UncleRus
b0fb8736a8 Comments updated 2016-03-13 16:48:05 +05:00
UncleRus
22ceb08b49 Tabs to spaces. Again. 2016-03-13 02:25:15 +05:00
UncleRus
b4554b5806 SPI mode bug fixed, SPI endianness bugs fixed, new spi_transfer() 2016-03-13 01:59:52 +05:00
UncleRus
9dc565ff7c Separate send/receive buffers 2016-03-08 04:00:11 +05:00
UncleRus
b5c2120efc Removed redeclaration of peripheral bus freq 2016-03-06 01:24:59 +05:00
UncleRus
0e3f3bb2ca Frequency divider bug 2016-03-05 03:07:57 +05:00
UncleRus
bd40f75d37 Hardware SPI driver 2016-03-05 02:29:01 +05:00
Angus Gratton
2e8c370d2c Merge pull request #94 from foogod/gpio_pullup_changes
Separate pullup config out of `gpio_enable()`
2016-02-24 09:17:39 +11:00
Angus Gratton
d1091b69d1 Make the task stack overflow message clearer
Related to #96
2016-02-24 08:54:32 +11:00
Alex Stewart
8279b5cfd1 Added some clarifications to comments in esp/gpio.h 2016-02-22 09:32:12 -08:00
Alex Stewart
c36feab845 Separate pullup config out of gpio_enable()
Created `gpio_set_pullup` to configure pullups independently of direction.
Removed GPIO_INPUT_PULLUP direction type.
Added misc other helper functions in iomux.h
2016-02-21 18:34:11 -08:00
Angus Gratton
b4af009efe Add esp_gpio.c, including gpio_enable() function
Fix build broken since 812c2fef (unclear why previous commits didn't break?)
2015-12-01 09:56:40 +11:00
Angus Gratton
812c2fef21 Removed INLINED (force inline) macro.
Progress towards #57.
2015-11-28 18:01:03 +11:00
Angus Gratton
2887896c76 timers.h: Return error codes instead of true/false for failures 2015-11-28 16:33:39 +11:00
Angus Gratton
336bad573d timers.h: Remove compile-time-auto-inlining complexity
Fixes bug mentioned in #72 (oops!), also progress towards #57.
2015-11-28 16:32:52 +11:00
Johan Kanflo
4cfe40d348 extras/stdin_uart_interrupt: stdin via IRQ driven RX driver on UART0
See examples/terminal/ for usage
2015-11-21 16:15:58 +11:00
Angus Gratton
5301174290 registers.h: Add i2s, SLC, RTC register headers 2015-11-20 17:56:38 +11:00
Angus Gratton
d63a341c4c RTC registers: Add some notes about other register values
Still patchy, but more towards #8.
2015-11-20 17:49:46 +11:00
Angus Gratton
925753819e Add in-progress RTC register header (some registers still undocumented)
Author for this work is @foogod, extracted from 1da996e (open-libmain branch).

Progress towards #8.
2015-11-20 17:31:11 +11:00
Angus Gratton
547c57c840 Add SLC interrupt number 1. Closes #69 2015-11-20 17:25:15 +11:00
Dag Ågren
cad1655330 Add static asserts and create slc.h header for descriptor struct 2015-11-19 21:14:16 +02:00
Dag Agren
1f1bb4d190 Add I2S and SLC register headers 2015-11-16 00:20:16 +02:00
Angus Gratton
5cd31c649a GPIO2 UART iomux values: Remove _BLINK from macro name
This pin acts as a real TX not an activity LED as some pages suggest.
2015-10-28 20:31:50 +11:00
Angus Gratton
0165592231 iomux: Fix bug setting IOMUX_FUNC(4)
Function masking value was incorrect
2015-10-28 20:31:44 +11:00
Angus Gratton
c2e3541c05 Disable default line-buffering of stdout
As discussed in #52. Application can re-enable buffering on stdout with setbuf() or setbuf()
2015-10-11 09:21:30 +11:00
Angus Gratton
0c6a8881a4 Fix sdk_uart_rx_one_char implementation, move into sdk_compat.c 2015-10-06 23:48:28 +11:00
Angus Gratton
be3968abf0 stdout: Bring back auto-CRLF behaviour as discussed 2015-10-06 23:24:40 +11:00
Angus Gratton
7823a28ff8 Change default baud rate back to 74906bps, compatible with boot ROM rate
This reverts a behaviour change from 3ceadfc0a6.
2015-10-06 23:11:17 +11:00
Angus Gratton
cd68622292 Merge branch 'master' into uart_h 2015-10-06 18:37:28 +11:00
Angus Gratton
dc0fa4e207 Merge pull request #50 from SuperHouse/fix/interrupts
Fix/interrupts
2015-10-06 18:36:03 +11:00
Angus Gratton
12399c05ef exception_vectors: Use call0 for sdk__xt_int_exit, in case it needs a literal 2015-10-06 18:25:48 +11:00
Angus Gratton
0d35c0c02d exception_vectors.S: Use .Lnnn syntax for local labels, as noted by @foogod 2015-10-06 18:24:35 +11:00
Angus Gratton
0c0668bfa0 app_main: Refactor to use uart.h functions instead of raw register access
This removes the automatic insertion of CR ahead of LF by the SDK putc
function when called inside the SDK (although we'd already replaced
printf, so most were bypassing this putc function anyhow.)
2015-10-06 18:14:05 +11:00
Angus Gratton
3ceadfc0a6 uart.h: Add uart_get_baud/uart_set_baud functions, change default baud rate from 74906 to 115200 2015-10-06 17:49:00 +11:00
Alex Stewart
707d0ed981 Fix issue #52. Add esp/uart.h 2015-10-05 21:51:57 -07:00
Angus Gratton
afd58bc1ff core headers: Add C++ linker compatibility 2015-10-05 18:33:32 +11:00
Angus Gratton
d39b3f6bb6 NMI Handler: Save 512 bytes of RAM via NMI stack space. Add stack overflow detection. 2015-09-29 17:33:15 +10:00
Angus Gratton
697d5b72bc NMIExceptionHandler: Don't save callee-saved registers, fix stack alignment
NMI routine sdk_wDev_ProcessFiq seems to be written in C, meets ABI
calling conventions for callee-saved registers. Not sure why SDK
handlers saved them.

NMI handler now also meets the ABI requirement that stack is 16 byte
aligned (doesn't seem strictly necessary, but can't hurt.)
2015-09-29 15:05:57 +10:00
Angus Gratton
4448380c5e NMIExceptionHandler: Clean up, refactor to use excsave3 for stack pointer 2015-09-29 14:37:33 +10:00
Angus Gratton
89c481c606 Simplify interrupt and RTOS timer tick handlers
RTOS Timer tick handler is now the same as any other ISR.

This causes a few subtle behaviour changes that seem OK but are worth noting:

* RTOS tick handler sdk__xt_timer_int() is now called from one stack
  frame deeper (inside _xt_isr_handler()), whereas before it was called
  from the level above in UserHandleInterrupt. I can't see any way that
  the extra ~40 bytes of stack use here hurt, though.

* sdk__xt_timer_int() was previous called after all other interrupts
  flagged in the handler, now it's called before the TIMER FRC1 & FRC2
  handlers. The tick handler doesn't appear to do anything particularly
  timing intensive, though.

* GPIO interrupt (value 3) is now lower priority than the SPI
  interrupt (value 2), whereas before it would have been called before
  SPI if both interrupts triggered at once.
2015-09-29 13:21:04 +10:00
Angus Gratton
ed8470631f Consolidate interrupt management in core as esp/interrupts.h & esp_interrupts.c 2015-09-28 22:15:40 +10:00
Angus Gratton
fc9d9ff89c Merge branch 'experiments/unaligned_load' into feature/mbedtls_notworking 2015-09-25 16:57:49 +10:00
Alex Stewart
b813489524 Code reformat/cleanup of exception_vectors.S 2015-09-24 22:43:29 -07:00
Alex Stewart
b6c2e4df59 Fix bad memory access in NMI handler
CallNMIExceptionHandler was saving/restoring registers to the wrong offsets,
causing it to potentially corrupt the first two slots of the
LoadStoreErrorHandler's save area.
2015-09-24 20:12:14 -07:00
Angus Gratton
87f77b1021 Refactor Hardware RNG functions to esp/hwrand.h
As suggested by @foogod, thanks!
2015-09-24 20:48:16 +10:00
Angus Gratton
09405a9095 Merge branch 'master' into feature/mbedtls 2015-09-24 20:40:36 +10:00
Angus Gratton
c31b9be9a2 Merge branch 'experiments/unaligned_load' into feature/mbedtls 2015-09-24 20:25:10 +10:00
Alex Stewart
b15d149b09 More LoadStoreErrorHandler performance improvements 2015-09-23 08:51:36 -07:00
Alex Stewart
f1bff97103 Further optimizations for LoadStoreErrorHandler 2015-09-21 22:13:14 -07:00
Alex Stewart
b280f8a725 Fix format strings in app_main.c 2015-09-20 14:09:30 -07:00
Alex Stewart
ba7492756c Merge branch 'master' into open-startup 2015-09-20 14:05:54 -07:00
Angus Gratton
b03f279f74 mbedTLS: Add ESP8266 hardware entropy source discovered by @foogod
Addresses #3, provided turns out to be an effective HWRNG.
2015-09-20 21:15:30 +10:00
Angus Gratton
3aff91c85c Rename GPIO_CONF_PUSH_PULL to GPIO_CONF_OPEN_DRAIN
Seems I got the functionality of this bit inverted when
initially testing.

In testing it also seems open drain mode is ignored on some pins, which
still source current. Needs more investigation though (may be pullups
internal to the ESP modules or set by default in software.)

Relates to #45
2015-09-20 21:13:38 +10:00
Angus Gratton
f31daa7f9a iomux: Fix setting of invalid bits when masking in iomux fields
Fixes regression from 2a939e97

Part of issue #45
2015-09-20 21:13:38 +10:00
Angus Gratton
6c06e5e91e common_macros: Include sys/cdefs.h, defines _Static_assert among others 2015-09-20 21:13:38 +10:00
Angus Gratton
1c8017484c Move c++ operators back to link-time resolutions, part of 'core'
This reverts commit e9b1df5cb5.
2015-09-20 21:13:38 +10:00
Angus Gratton
7be365ef08 gpio.h: Explicit cast to enum type (needed for g++) 2015-09-20 21:13:38 +10:00
Angus Gratton
6416fe7329 Post-merge cleanup of extras/cpp_support 2015-09-20 21:13:38 +10:00
Angus Gratton
94fabc6ceb Add basic C++ new/delete operators, as contributed by @mikejac in #24 2015-09-20 21:13:38 +10:00
Angus Gratton
cc97067fa1 Add C++ support to Makefile, and proof-of-concept simple.cpp example
This is a work in progress based on @mikejac's work.

Missing:
* No 'new' operator.
* I don't think STL is currently supported.
2015-09-20 21:13:38 +10:00
Michael Jacobsen
372827ac42 Mostly updated header files for use in C++ 2015-09-20 21:13:38 +10:00
Angus Gratton
f47aa77982 Moved DoubleLoadStorageHandler to end of functions, improve fast path l8ui performance
This allows a conditional branch that previously required a full jump instruction not to require it.
2015-09-15 15:09:42 +10:00
Angus Gratton
9cd23e08a4 Fix performance regression in 3911a94cc 2015-09-15 15:00:56 +10:00
Angus Gratton
7d779389ab unaligned_load: Fix sign extension, add test case for sign extension
H/T to @foogod again for this.
2015-09-15 12:00:32 +10:00
Angus Gratton
c7a7dfdf82 Remove the unaligned load handler to its own source file as it was getting quite complex
The downside here is needing to use #include so the 'beq' in the
exception vector can land on it directly, save an instruction.

There might be a better way to do this, but it seems hard to "curate"
the order that symbols appear in each section.
2015-09-15 11:34:21 +10:00
Angus Gratton
3911a94cc8 Remove one more branch from l8ui code path
Thanks for @foogod for the heads-up on this.
2015-09-15 11:01:21 +10:00
Angus Gratton
26e1ce325e Fix sign extension as suggested by @foogod
Also removes a branch from l8ui path, saves some cycles
2015-09-14 18:30:11 +10:00
Angus Gratton
259c9b643f Exception vectors: Remove no-op syscallhandler 2015-09-14 18:17:45 +10:00
Angus Gratton
0e0c5d89b8 NMI exception handler: Fix reserving too much RAM for registers 2015-09-14 17:43:29 +10:00
Angus Gratton
9c15b757d3 Exception handlers: remove unused NMIHandlerAddress 2015-09-14 17:22:50 +10:00
Angus Gratton
0432ae3745 Use GPIO2 for led_debug.S 2015-09-14 17:20:00 +10:00
Angus Gratton
45d4e0da2d Exception vectors: Rearrange to use absolute offets instead of .align hacks 2015-09-14 17:20:00 +10:00
Angus Gratton
a5a179beef Extended unaligned load support to work from DoubleExceptionVector
Allows handling bad loads that occur inside level 1 exception handlers.
2015-09-14 17:20:00 +10:00
Angus Gratton
8b90dbd9e5 Merge branch 'feature/c++' 2015-09-12 16:27:26 +10:00
Angus Gratton
c45e84d61d Rename GPIO_CONF_PUSH_PULL to GPIO_CONF_OPEN_DRAIN
Seems I got the functionality of this bit inverted when
initially testing.

In testing it also seems open drain mode is ignored on some pins, which
still source current. Needs more investigation though (may be pullups
internal to the ESP modules or set by default in software.)

Relates to #45
2015-09-12 16:21:26 +10:00
Angus Gratton
91d897dbbe iomux: Fix setting of invalid bits when masking in iomux fields
Fixes regression from 2a939e97

Part of issue #45
2015-09-12 15:23:42 +10:00
Angus Gratton
ac0a947453 Merge branch 'master' into experiments/unaligned_load 2015-09-10 08:19:42 +10:00
Angus Gratton
1d7bfeeccd Merge branch 'fix/int32_t'
Closes #42
2015-09-09 16:23:31 +10:00
Angus Gratton
7e73693898 Rework component makefiles to have a default <component>_ROOT
This fixes a long-standing bug where build directories sometimes
expanded many levels deeper than they should have.

Component names can now no longer contains slashes (ie the component
name for 'extras/i2c' is now just 'i2c')
2015-09-08 09:59:59 +10:00
Angus Gratton
7ed064a750 libc: Redefine int32_t/uint32_t as 'int' not 'long'
libc built from projectgus/newlib-xtensa@0077776963

Closes #42
2015-09-05 13:37:00 +10:00
Angus Gratton
920ee8bf85 libc syscalls: ENOSYS implementations for open,fstat,close,lseek
Closes #41
2015-09-03 11:45:52 +10:00
Angus Gratton
568ebc0fdc libc read()/write() syscalls - return EBADF if fd is not stdin/stdout as applicable
As discussed in #41

Also fixes indent in _read_r
2015-09-03 11:34:54 +10:00