j3d1/esp-open-rtos
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

rename GPIO_CONF_DRIVER_ENABLE back to GPIO_CONF_PUSH_PULL

Browse source
This commit is contained in:
Alex Stewart 2015-08-21 09:54:20 -07:00
parent ab6f4b8420
commit 1ebb85b150
2 changed files with 5 additions and 5 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
core/include/esp/gpio.h
View file

@ -36,7 +36,7 @@ INLINED void gpio_enable(const uint8_t gpio_num, const gpio_direction_t directio
break;
case GPIO_OUTPUT:
iomux_flags = IOMUX_PIN_OUTPUT_ENABLE;
ctrl_val = GPIO_CONF_DRIVER_ENABLE;
ctrl_val = GPIO_CONF_PUSH_PULL;
break;
case GPIO_OUT_OPEN_DRAIN:
iomux_flags = IOMUX_PIN_OUTPUT_ENABLE;

8
core/include/esp/gpio_regs.h
View file

@ -76,7 +76,7 @@ _Static_assert(sizeof(struct GPIO_REGS) == 0x74, "GPIO_REGS is the wrong size");
* Under what conditions this GPIO input should generate an interrupt.
* (see gpio_inttype_t enum below for values)
*
* GPIO_CONF_DRIVER_ENABLE (boolean)
* GPIO_CONF_PUSH_PULL (boolean)
* When set, a high output state will pull the pin up to +Vcc (3.3V). When
* cleared, output functions in "open drain" mode (low state will pull down
* to ground, but high state allows output to "float").
@ -91,9 +91,9 @@ _Static_assert(sizeof(struct GPIO_REGS) == 0x74, "GPIO_REGS is the wrong size");
#define GPIO_CONF_CONFIG_M 0x00000003
#define GPIO_CONF_CONFIG_S 11
#define GPIO_CONF_WAKEUP_ENABLE BIT(10)
#define GPIO_CONF_INTTYPE_M 0x00000007
#define GPIO_CONF_INTTYPE_S 7
#define GPIO_CONF_DRIVER_ENABLE BIT(2)
#define GPIO_CONF_INTTYPE_M 0x00000007
#define GPIO_CONF_INTTYPE_S 7
#define GPIO_CONF_PUSH_PULL BIT(2)
#define GPIO_CONF_SOURCE_PWM BIT(0)
/* Valid values for the GPIO_CONF_INTTYPE field */