5752 lines
350 KiB
C
5752 lines
350 KiB
C
|
/*---------------------------------------------------------------------------------------------------------------------------------------------------
|
|||
|
* irmp.c - infrared multi-protocol decoder, supports several remote control protocols
|
|||
|
*
|
|||
|
* Copyright (c) 2009-2016 Frank Meyer - frank(at)fli4l.de
|
|||
|
*
|
|||
|
* $Id: irmp.c,v 1.192 2017/02/17 09:13:06 fm Exp $
|
|||
|
*
|
|||
|
* Supported AVR mikrocontrollers:
|
|||
|
*
|
|||
|
* ATtiny87, ATtiny167
|
|||
|
* ATtiny45, ATtiny85
|
|||
|
* ATtiny44, ATtiny84
|
|||
|
* ATmega8, ATmega16, ATmega32
|
|||
|
* ATmega162
|
|||
|
* ATmega164, ATmega324, ATmega644, ATmega644P, ATmega1284, ATmega1284P
|
|||
|
* ATmega88, ATmega88P, ATmega168, ATmega168P, ATmega328P
|
|||
|
*
|
|||
|
* This program is free software; you can redistribute it and/or modify
|
|||
|
* it under the terms of the GNU General Public License as published by
|
|||
|
* the Free Software Foundation; either version 2 of the License, or
|
|||
|
* (at your option) any later version.
|
|||
|
*---------------------------------------------------------------------------------------------------------------------------------------------------
|
|||
|
*/
|
|||
|
|
|||
|
#include "irmp.h"
|
|||
|
|
|||
|
#if IRMP_SUPPORT_GRUNDIG_PROTOCOL == 1 || IRMP_SUPPORT_NOKIA_PROTOCOL == 1 || IRMP_SUPPORT_IR60_PROTOCOL == 1
|
|||
|
# define IRMP_SUPPORT_GRUNDIG_NOKIA_IR60_PROTOCOL 1
|
|||
|
#else
|
|||
|
# define IRMP_SUPPORT_GRUNDIG_NOKIA_IR60_PROTOCOL 0
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_SIEMENS_PROTOCOL == 1 || IRMP_SUPPORT_RUWIDO_PROTOCOL == 1
|
|||
|
# define IRMP_SUPPORT_SIEMENS_OR_RUWIDO_PROTOCOL 1
|
|||
|
#else
|
|||
|
# define IRMP_SUPPORT_SIEMENS_OR_RUWIDO_PROTOCOL 0
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 || \
|
|||
|
IRMP_SUPPORT_S100_PROTOCOL == 1 || \
|
|||
|
IRMP_SUPPORT_RC6_PROTOCOL == 1 || \
|
|||
|
IRMP_SUPPORT_GRUNDIG_NOKIA_IR60_PROTOCOL == 1 || \
|
|||
|
IRMP_SUPPORT_SIEMENS_OR_RUWIDO_PROTOCOL == 1 || \
|
|||
|
IRMP_SUPPORT_IR60_PROTOCOL == 1 || \
|
|||
|
IRMP_SUPPORT_A1TVBOX_PROTOCOL == 1 || \
|
|||
|
IRMP_SUPPORT_MERLIN_PROTOCOL == 1 || \
|
|||
|
IRMP_SUPPORT_ORTEK_PROTOCOL == 1
|
|||
|
# define IRMP_SUPPORT_MANCHESTER 1
|
|||
|
#else
|
|||
|
# define IRMP_SUPPORT_MANCHESTER 0
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_NETBOX_PROTOCOL == 1
|
|||
|
# define IRMP_SUPPORT_SERIAL 1
|
|||
|
#else
|
|||
|
# define IRMP_SUPPORT_SERIAL 0
|
|||
|
#endif
|
|||
|
|
|||
|
#define IRMP_KEY_REPETITION_LEN (uint_fast16_t)(F_INTERRUPTS * 150.0e-3 + 0.5) // autodetect key repetition within 150 msec
|
|||
|
|
|||
|
#define MIN_TOLERANCE_00 1.0 // -0%
|
|||
|
#define MAX_TOLERANCE_00 1.0 // +0%
|
|||
|
|
|||
|
#define MIN_TOLERANCE_02 0.98 // -2%
|
|||
|
#define MAX_TOLERANCE_02 1.02 // +2%
|
|||
|
|
|||
|
#define MIN_TOLERANCE_03 0.97 // -3%
|
|||
|
#define MAX_TOLERANCE_03 1.03 // +3%
|
|||
|
|
|||
|
#define MIN_TOLERANCE_05 0.95 // -5%
|
|||
|
#define MAX_TOLERANCE_05 1.05 // +5%
|
|||
|
|
|||
|
#define MIN_TOLERANCE_10 0.9 // -10%
|
|||
|
#define MAX_TOLERANCE_10 1.1 // +10%
|
|||
|
|
|||
|
#define MIN_TOLERANCE_15 0.85 // -15%
|
|||
|
#define MAX_TOLERANCE_15 1.15 // +15%
|
|||
|
|
|||
|
#define MIN_TOLERANCE_20 0.8 // -20%
|
|||
|
#define MAX_TOLERANCE_20 1.2 // +20%
|
|||
|
|
|||
|
#define MIN_TOLERANCE_30 0.7 // -30%
|
|||
|
#define MAX_TOLERANCE_30 1.3 // +30%
|
|||
|
|
|||
|
#define MIN_TOLERANCE_40 0.6 // -40%
|
|||
|
#define MAX_TOLERANCE_40 1.4 // +40%
|
|||
|
|
|||
|
#define MIN_TOLERANCE_50 0.5 // -50%
|
|||
|
#define MAX_TOLERANCE_50 1.5 // +50%
|
|||
|
|
|||
|
#define MIN_TOLERANCE_60 0.4 // -60%
|
|||
|
#define MAX_TOLERANCE_60 1.6 // +60%
|
|||
|
|
|||
|
#define MIN_TOLERANCE_70 0.3 // -70%
|
|||
|
#define MAX_TOLERANCE_70 1.7 // +70%
|
|||
|
|
|||
|
#define SIRCS_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SIRCS_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define SIRCS_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SIRCS_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define SIRCS_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SIRCS_START_BIT_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#if IRMP_SUPPORT_NETBOX_PROTOCOL // only 5% to avoid conflict with NETBOX:
|
|||
|
# define SIRCS_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SIRCS_START_BIT_PAUSE_TIME * MAX_TOLERANCE_05 + 0.5))
|
|||
|
#else // only 5% + 1 to avoid conflict with RC6:
|
|||
|
# define SIRCS_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SIRCS_START_BIT_PAUSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1)
|
|||
|
#endif
|
|||
|
#define SIRCS_1_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SIRCS_1_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define SIRCS_1_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SIRCS_1_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define SIRCS_0_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SIRCS_0_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define SIRCS_0_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SIRCS_0_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define SIRCS_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SIRCS_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define SIRCS_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SIRCS_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
|
|||
|
#define NEC_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NEC_START_BIT_PULSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
|
|||
|
#define NEC_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NEC_START_BIT_PULSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
|
|||
|
#define NEC_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NEC_START_BIT_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
|
|||
|
#define NEC_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NEC_START_BIT_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
|
|||
|
#define NEC_REPEAT_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NEC_REPEAT_START_BIT_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
|
|||
|
#define NEC_REPEAT_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NEC_REPEAT_START_BIT_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
|
|||
|
#define NEC_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NEC_PULSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
|
|||
|
#define NEC_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NEC_PULSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
|
|||
|
#define NEC_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NEC_1_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
|
|||
|
#define NEC_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NEC_1_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
|
|||
|
#define NEC_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NEC_0_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
|
|||
|
#define NEC_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NEC_0_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
|
|||
|
// autodetect nec repetition frame within 50 msec:
|
|||
|
// NEC seems to send the first repetition frame after 40ms, further repetition frames after 100 ms
|
|||
|
#if 0
|
|||
|
#define NEC_FRAME_REPEAT_PAUSE_LEN_MAX (uint_fast16_t)(F_INTERRUPTS * NEC_FRAME_REPEAT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5)
|
|||
|
#else
|
|||
|
#define NEC_FRAME_REPEAT_PAUSE_LEN_MAX (uint_fast16_t)(F_INTERRUPTS * 100.0e-3 * MAX_TOLERANCE_20 + 0.5)
|
|||
|
#endif
|
|||
|
|
|||
|
#define SAMSUNG_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SAMSUNG_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define SAMSUNG_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SAMSUNG_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define SAMSUNG_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SAMSUNG_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define SAMSUNG_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SAMSUNG_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define SAMSUNG_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SAMSUNG_PULSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
|
|||
|
#define SAMSUNG_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SAMSUNG_PULSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
|
|||
|
#define SAMSUNG_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SAMSUNG_1_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
|
|||
|
#define SAMSUNG_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SAMSUNG_1_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
|
|||
|
#define SAMSUNG_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SAMSUNG_0_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
|
|||
|
#define SAMSUNG_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SAMSUNG_0_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
|
|||
|
|
|||
|
#define SAMSUNGAH_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SAMSUNGAH_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define SAMSUNGAH_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SAMSUNGAH_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define SAMSUNGAH_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SAMSUNGAH_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define SAMSUNGAH_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SAMSUNGAH_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define SAMSUNGAH_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SAMSUNGAH_PULSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
|
|||
|
#define SAMSUNGAH_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SAMSUNGAH_PULSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
|
|||
|
#define SAMSUNGAH_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SAMSUNGAH_1_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
|
|||
|
#define SAMSUNGAH_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SAMSUNGAH_1_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
|
|||
|
#define SAMSUNGAH_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SAMSUNGAH_0_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
|
|||
|
#define SAMSUNGAH_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SAMSUNGAH_0_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
|
|||
|
|
|||
|
#define MATSUSHITA_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * MATSUSHITA_START_BIT_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define MATSUSHITA_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * MATSUSHITA_START_BIT_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define MATSUSHITA_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * MATSUSHITA_START_BIT_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define MATSUSHITA_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * MATSUSHITA_START_BIT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define MATSUSHITA_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * MATSUSHITA_PULSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
|
|||
|
#define MATSUSHITA_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * MATSUSHITA_PULSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)
|
|||
|
#define MATSUSHITA_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * MATSUSHITA_1_PAUSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
|
|||
|
#define MATSUSHITA_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * MATSUSHITA_1_PAUSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)
|
|||
|
#define MATSUSHITA_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * MATSUSHITA_0_PAUSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
|
|||
|
#define MATSUSHITA_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * MATSUSHITA_0_PAUSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)
|
|||
|
|
|||
|
#define KASEIKYO_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * KASEIKYO_START_BIT_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define KASEIKYO_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * KASEIKYO_START_BIT_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define KASEIKYO_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * KASEIKYO_START_BIT_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define KASEIKYO_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * KASEIKYO_START_BIT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define KASEIKYO_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * KASEIKYO_PULSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
|
|||
|
#define KASEIKYO_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * KASEIKYO_PULSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)
|
|||
|
#define KASEIKYO_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * KASEIKYO_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define KASEIKYO_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * KASEIKYO_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define KASEIKYO_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * KASEIKYO_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define KASEIKYO_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * KASEIKYO_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
|
|||
|
#define MITSU_HEAVY_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * MITSU_HEAVY_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define MITSU_HEAVY_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * MITSU_HEAVY_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define MITSU_HEAVY_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * MITSU_HEAVY_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define MITSU_HEAVY_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * MITSU_HEAVY_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define MITSU_HEAVY_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * MITSU_HEAVY_PULSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
|
|||
|
#define MITSU_HEAVY_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * MITSU_HEAVY_PULSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)
|
|||
|
#define MITSU_HEAVY_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * MITSU_HEAVY_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define MITSU_HEAVY_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * MITSU_HEAVY_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define MITSU_HEAVY_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * MITSU_HEAVY_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define MITSU_HEAVY_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * MITSU_HEAVY_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
|
|||
|
#define VINCENT_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * VINCENT_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define VINCENT_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * VINCENT_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define VINCENT_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * VINCENT_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define VINCENT_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * VINCENT_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define VINCENT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * VINCENT_PULSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
|
|||
|
#define VINCENT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * VINCENT_PULSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)
|
|||
|
#define VINCENT_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * VINCENT_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define VINCENT_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * VINCENT_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define VINCENT_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * VINCENT_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define VINCENT_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * VINCENT_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
|
|||
|
#define PANASONIC_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * PANASONIC_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define PANASONIC_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * PANASONIC_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define PANASONIC_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * PANASONIC_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define PANASONIC_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * PANASONIC_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define PANASONIC_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * PANASONIC_PULSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
|
|||
|
#define PANASONIC_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * PANASONIC_PULSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)
|
|||
|
#define PANASONIC_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * PANASONIC_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define PANASONIC_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * PANASONIC_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define PANASONIC_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * PANASONIC_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define PANASONIC_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * PANASONIC_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
|
|||
|
#define RECS80_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RECS80_START_BIT_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define RECS80_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RECS80_START_BIT_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define RECS80_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RECS80_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define RECS80_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RECS80_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define RECS80_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RECS80_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define RECS80_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RECS80_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define RECS80_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RECS80_1_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define RECS80_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RECS80_1_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define RECS80_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RECS80_0_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define RECS80_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RECS80_0_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
|
|||
|
|
|||
|
#if IRMP_SUPPORT_BOSE_PROTOCOL == 1 // BOSE conflicts with RC5, so keep tolerance for RC5 minimal here:
|
|||
|
#define RC5_START_BIT_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RC5_BIT_TIME * MIN_TOLERANCE_05 + 0.5) - 1)
|
|||
|
#define RC5_START_BIT_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RC5_BIT_TIME * MAX_TOLERANCE_05 + 0.5) + 1)
|
|||
|
#else
|
|||
|
#define RC5_START_BIT_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RC5_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define RC5_START_BIT_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RC5_BIT_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#endif
|
|||
|
|
|||
|
#define RC5_BIT_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RC5_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define RC5_BIT_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RC5_BIT_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
|
|||
|
#if IRMP_SUPPORT_BOSE_PROTOCOL == 1 // BOSE conflicts with S100, so keep tolerance for S100 minimal here:
|
|||
|
#define S100_START_BIT_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * S100_BIT_TIME * MIN_TOLERANCE_05 + 0.5) - 1)
|
|||
|
#define S100_START_BIT_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * S100_BIT_TIME * MAX_TOLERANCE_05 + 0.5) + 1)
|
|||
|
#else
|
|||
|
#define S100_START_BIT_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * S100_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define S100_START_BIT_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * S100_BIT_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#endif
|
|||
|
|
|||
|
#define S100_BIT_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * S100_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define S100_BIT_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * S100_BIT_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
|
|||
|
#define DENON_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * DENON_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define DENON_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * DENON_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define DENON_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * DENON_1_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define DENON_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * DENON_1_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
// RUWIDO (see t-home-mediareceiver-15kHz.txt) conflicts here with DENON
|
|||
|
#define DENON_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * DENON_0_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define DENON_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * DENON_0_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define DENON_AUTO_REPETITION_PAUSE_LEN ((uint_fast16_t)(F_INTERRUPTS * DENON_AUTO_REPETITION_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
|
|||
|
#define THOMSON_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * THOMSON_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define THOMSON_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * THOMSON_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define THOMSON_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * THOMSON_1_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define THOMSON_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * THOMSON_1_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define THOMSON_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * THOMSON_0_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define THOMSON_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * THOMSON_0_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
|
|||
|
#define RC6_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RC6_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define RC6_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RC6_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define RC6_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RC6_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define RC6_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RC6_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define RC6_TOGGLE_BIT_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RC6_TOGGLE_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define RC6_TOGGLE_BIT_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RC6_TOGGLE_BIT_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define RC6_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RC6_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define RC6_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RC6_BIT_TIME * MAX_TOLERANCE_60 + 0.5) + 1) // pulses: 300 - 800
|
|||
|
#define RC6_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RC6_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define RC6_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RC6_BIT_TIME * MAX_TOLERANCE_20 + 0.5) + 1) // pauses: 300 - 600
|
|||
|
|
|||
|
#define RECS80EXT_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RECS80EXT_START_BIT_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define RECS80EXT_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RECS80EXT_START_BIT_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define RECS80EXT_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RECS80EXT_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define RECS80EXT_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RECS80EXT_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define RECS80EXT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RECS80EXT_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define RECS80EXT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RECS80EXT_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define RECS80EXT_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RECS80EXT_1_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define RECS80EXT_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RECS80EXT_1_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define RECS80EXT_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RECS80EXT_0_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define RECS80EXT_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RECS80EXT_0_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
|
|||
|
#define NUBERT_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NUBERT_START_BIT_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define NUBERT_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NUBERT_START_BIT_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define NUBERT_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NUBERT_START_BIT_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define NUBERT_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NUBERT_START_BIT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define NUBERT_1_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NUBERT_1_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define NUBERT_1_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NUBERT_1_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define NUBERT_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NUBERT_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define NUBERT_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NUBERT_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define NUBERT_0_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NUBERT_0_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define NUBERT_0_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NUBERT_0_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define NUBERT_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NUBERT_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define NUBERT_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NUBERT_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
|
|||
|
#define FAN_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * FAN_START_BIT_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define FAN_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * FAN_START_BIT_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define FAN_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * FAN_START_BIT_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define FAN_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * FAN_START_BIT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define FAN_1_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * FAN_1_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define FAN_1_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * FAN_1_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define FAN_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * FAN_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define FAN_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * FAN_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define FAN_0_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * FAN_0_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define FAN_0_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * FAN_0_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define FAN_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * FAN_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define FAN_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * FAN_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
|
|||
|
#define SPEAKER_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SPEAKER_START_BIT_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define SPEAKER_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SPEAKER_START_BIT_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define SPEAKER_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SPEAKER_START_BIT_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define SPEAKER_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SPEAKER_START_BIT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define SPEAKER_1_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SPEAKER_1_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define SPEAKER_1_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SPEAKER_1_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define SPEAKER_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SPEAKER_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define SPEAKER_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SPEAKER_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define SPEAKER_0_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SPEAKER_0_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define SPEAKER_0_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SPEAKER_0_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define SPEAKER_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SPEAKER_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define SPEAKER_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SPEAKER_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
|
|||
|
#define BANG_OLUFSEN_START_BIT1_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT1_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define BANG_OLUFSEN_START_BIT1_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT1_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define BANG_OLUFSEN_START_BIT1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT1_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define BANG_OLUFSEN_START_BIT1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT1_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define BANG_OLUFSEN_START_BIT2_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT2_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define BANG_OLUFSEN_START_BIT2_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT2_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define BANG_OLUFSEN_START_BIT2_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT2_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define BANG_OLUFSEN_START_BIT2_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT2_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define BANG_OLUFSEN_START_BIT3_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT3_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define BANG_OLUFSEN_START_BIT3_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT3_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define BANG_OLUFSEN_START_BIT3_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT3_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define BANG_OLUFSEN_START_BIT3_PAUSE_LEN_MAX ((PAUSE_LEN)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT3_PAUSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1) // value must be below IRMP_TIMEOUT
|
|||
|
#define BANG_OLUFSEN_START_BIT4_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT4_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define BANG_OLUFSEN_START_BIT4_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT4_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define BANG_OLUFSEN_START_BIT4_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT4_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define BANG_OLUFSEN_START_BIT4_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_START_BIT4_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define BANG_OLUFSEN_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define BANG_OLUFSEN_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define BANG_OLUFSEN_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_1_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define BANG_OLUFSEN_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_1_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define BANG_OLUFSEN_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_0_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define BANG_OLUFSEN_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_0_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define BANG_OLUFSEN_R_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_R_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define BANG_OLUFSEN_R_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_R_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define BANG_OLUFSEN_TRAILER_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_TRAILER_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define BANG_OLUFSEN_TRAILER_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BANG_OLUFSEN_TRAILER_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
|
|||
|
#define IR60_TIMEOUT_LEN ((uint_fast8_t)(F_INTERRUPTS * IR60_TIMEOUT_TIME * 0.5))
|
|||
|
#define GRUNDIG_NOKIA_IR60_START_BIT_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * GRUNDIG_NOKIA_IR60_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define GRUNDIG_NOKIA_IR60_START_BIT_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * GRUNDIG_NOKIA_IR60_BIT_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define GRUNDIG_NOKIA_IR60_BIT_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * GRUNDIG_NOKIA_IR60_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define GRUNDIG_NOKIA_IR60_BIT_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * GRUNDIG_NOKIA_IR60_BIT_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define GRUNDIG_NOKIA_IR60_PRE_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * GRUNDIG_NOKIA_IR60_PRE_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define GRUNDIG_NOKIA_IR60_PRE_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * GRUNDIG_NOKIA_IR60_PRE_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
|
|||
|
#define SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SIEMENS_OR_RUWIDO_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SIEMENS_OR_RUWIDO_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SIEMENS_OR_RUWIDO_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SIEMENS_OR_RUWIDO_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define SIEMENS_OR_RUWIDO_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SIEMENS_OR_RUWIDO_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define SIEMENS_OR_RUWIDO_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SIEMENS_OR_RUWIDO_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define SIEMENS_OR_RUWIDO_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define SIEMENS_OR_RUWIDO_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * SIEMENS_OR_RUWIDO_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
|
|||
|
#define FDC_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * FDC_START_BIT_PULSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1) // 5%: avoid conflict with NETBOX
|
|||
|
#define FDC_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * FDC_START_BIT_PULSE_TIME * MAX_TOLERANCE_05 + 0.5))
|
|||
|
#define FDC_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * FDC_START_BIT_PAUSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1)
|
|||
|
#define FDC_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * FDC_START_BIT_PAUSE_TIME * MAX_TOLERANCE_05 + 0.5))
|
|||
|
#define FDC_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * FDC_PULSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
|
|||
|
#define FDC_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * FDC_PULSE_TIME * MAX_TOLERANCE_50 + 0.5) + 1)
|
|||
|
#define FDC_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * FDC_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define FDC_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * FDC_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#if 0
|
|||
|
#define FDC_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * FDC_0_PAUSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1) // could be negative: 255
|
|||
|
#else
|
|||
|
#define FDC_0_PAUSE_LEN_MIN (1) // simply use 1
|
|||
|
#endif
|
|||
|
#define FDC_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * FDC_0_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
|
|||
|
#define RCCAR_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RCCAR_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define RCCAR_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RCCAR_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define RCCAR_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RCCAR_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define RCCAR_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RCCAR_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define RCCAR_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RCCAR_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define RCCAR_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RCCAR_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define RCCAR_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RCCAR_1_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
|
|||
|
#define RCCAR_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RCCAR_1_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
|
|||
|
#define RCCAR_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RCCAR_0_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
|
|||
|
#define RCCAR_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RCCAR_0_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
|
|||
|
|
|||
|
#define JVC_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * JVC_START_BIT_PULSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
|
|||
|
#define JVC_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * JVC_START_BIT_PULSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)
|
|||
|
#define JVC_REPEAT_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * (JVC_FRAME_REPEAT_PAUSE_TIME - IRMP_TIMEOUT_TIME) * MIN_TOLERANCE_40 + 0.5) - 1) // HACK!
|
|||
|
#define JVC_REPEAT_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * (JVC_FRAME_REPEAT_PAUSE_TIME - IRMP_TIMEOUT_TIME) * MAX_TOLERANCE_70 + 0.5) - 1) // HACK!
|
|||
|
#define JVC_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * JVC_PULSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
|
|||
|
#define JVC_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * JVC_PULSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)
|
|||
|
#define JVC_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * JVC_1_PAUSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
|
|||
|
#define JVC_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * JVC_1_PAUSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)
|
|||
|
#define JVC_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * JVC_0_PAUSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
|
|||
|
#define JVC_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * JVC_0_PAUSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)
|
|||
|
// autodetect JVC repetition frame within 50 msec:
|
|||
|
#define JVC_FRAME_REPEAT_PAUSE_LEN_MAX (uint_fast16_t)(F_INTERRUPTS * JVC_FRAME_REPEAT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5)
|
|||
|
|
|||
|
#define NIKON_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NIKON_START_BIT_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define NIKON_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NIKON_START_BIT_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define NIKON_START_BIT_PAUSE_LEN_MIN ((uint_fast16_t)(F_INTERRUPTS * NIKON_START_BIT_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define NIKON_START_BIT_PAUSE_LEN_MAX ((uint_fast16_t)(F_INTERRUPTS * NIKON_START_BIT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define NIKON_REPEAT_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NIKON_REPEAT_START_BIT_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define NIKON_REPEAT_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NIKON_REPEAT_START_BIT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define NIKON_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NIKON_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define NIKON_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NIKON_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define NIKON_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NIKON_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define NIKON_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NIKON_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define NIKON_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NIKON_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define NIKON_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NIKON_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define NIKON_FRAME_REPEAT_PAUSE_LEN_MAX (uint_fast16_t)(F_INTERRUPTS * NIKON_FRAME_REPEAT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5)
|
|||
|
|
|||
|
#define KATHREIN_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * KATHREIN_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define KATHREIN_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * KATHREIN_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define KATHREIN_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * KATHREIN_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define KATHREIN_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * KATHREIN_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define KATHREIN_1_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * KATHREIN_1_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define KATHREIN_1_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * KATHREIN_1_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define KATHREIN_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * KATHREIN_1_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define KATHREIN_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * KATHREIN_1_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define KATHREIN_0_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * KATHREIN_0_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define KATHREIN_0_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * KATHREIN_0_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define KATHREIN_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * KATHREIN_0_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define KATHREIN_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * KATHREIN_0_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define KATHREIN_SYNC_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * KATHREIN_SYNC_BIT_PAUSE_LEN_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define KATHREIN_SYNC_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * KATHREIN_SYNC_BIT_PAUSE_LEN_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
|
|||
|
#define NETBOX_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NETBOX_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define NETBOX_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NETBOX_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define NETBOX_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * NETBOX_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define NETBOX_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * NETBOX_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define NETBOX_PULSE_LEN ((uint_fast8_t)(F_INTERRUPTS * NETBOX_PULSE_TIME))
|
|||
|
#define NETBOX_PAUSE_LEN ((uint_fast8_t)(F_INTERRUPTS * NETBOX_PAUSE_TIME))
|
|||
|
#define NETBOX_PULSE_REST_LEN ((uint_fast8_t)(F_INTERRUPTS * NETBOX_PULSE_TIME / 4))
|
|||
|
#define NETBOX_PAUSE_REST_LEN ((uint_fast8_t)(F_INTERRUPTS * NETBOX_PAUSE_TIME / 4))
|
|||
|
|
|||
|
#define LEGO_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * LEGO_START_BIT_PULSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
|
|||
|
#define LEGO_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * LEGO_START_BIT_PULSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)
|
|||
|
#define LEGO_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * LEGO_START_BIT_PAUSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
|
|||
|
#define LEGO_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * LEGO_START_BIT_PAUSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)
|
|||
|
#define LEGO_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * LEGO_PULSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
|
|||
|
#define LEGO_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * LEGO_PULSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)
|
|||
|
#define LEGO_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * LEGO_1_PAUSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
|
|||
|
#define LEGO_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * LEGO_1_PAUSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)
|
|||
|
#define LEGO_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * LEGO_0_PAUSE_TIME * MIN_TOLERANCE_40 + 0.5) - 1)
|
|||
|
#define LEGO_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * LEGO_0_PAUSE_TIME * MAX_TOLERANCE_40 + 0.5) + 1)
|
|||
|
|
|||
|
#define BOSE_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BOSE_START_BIT_PULSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
|
|||
|
#define BOSE_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BOSE_START_BIT_PULSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
|
|||
|
#define BOSE_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BOSE_START_BIT_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
|
|||
|
#define BOSE_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BOSE_START_BIT_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
|
|||
|
#define BOSE_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BOSE_PULSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
|
|||
|
#define BOSE_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BOSE_PULSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
|
|||
|
#define BOSE_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BOSE_1_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
|
|||
|
#define BOSE_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BOSE_1_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
|
|||
|
#define BOSE_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * BOSE_0_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
|
|||
|
#define BOSE_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * BOSE_0_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
|
|||
|
#define BOSE_FRAME_REPEAT_PAUSE_LEN_MAX (uint_fast16_t)(F_INTERRUPTS * 100.0e-3 * MAX_TOLERANCE_20 + 0.5)
|
|||
|
|
|||
|
#define A1TVBOX_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * A1TVBOX_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define A1TVBOX_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * A1TVBOX_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define A1TVBOX_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * A1TVBOX_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define A1TVBOX_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * A1TVBOX_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define A1TVBOX_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * A1TVBOX_BIT_PULSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
|
|||
|
#define A1TVBOX_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * A1TVBOX_BIT_PULSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
|
|||
|
#define A1TVBOX_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * A1TVBOX_BIT_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
|
|||
|
#define A1TVBOX_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * A1TVBOX_BIT_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
|
|||
|
|
|||
|
#define MERLIN_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * MERLIN_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define MERLIN_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * MERLIN_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define MERLIN_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * MERLIN_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define MERLIN_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * MERLIN_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define MERLIN_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * MERLIN_BIT_PULSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
|
|||
|
#define MERLIN_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * MERLIN_BIT_PULSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
|
|||
|
#define MERLIN_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * MERLIN_BIT_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
|
|||
|
#define MERLIN_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * MERLIN_BIT_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
|
|||
|
|
|||
|
#define ORTEK_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * ORTEK_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define ORTEK_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * ORTEK_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define ORTEK_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * ORTEK_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define ORTEK_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * ORTEK_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define ORTEK_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * ORTEK_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define ORTEK_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * ORTEK_BIT_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define ORTEK_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * ORTEK_BIT_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define ORTEK_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * ORTEK_BIT_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
|
|||
|
#define TELEFUNKEN_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * TELEFUNKEN_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define TELEFUNKEN_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * TELEFUNKEN_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define TELEFUNKEN_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * (TELEFUNKEN_START_BIT_PAUSE_TIME) * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define TELEFUNKEN_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * (TELEFUNKEN_START_BIT_PAUSE_TIME) * MAX_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define TELEFUNKEN_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * TELEFUNKEN_PULSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
|
|||
|
#define TELEFUNKEN_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * TELEFUNKEN_PULSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
|
|||
|
#define TELEFUNKEN_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * TELEFUNKEN_1_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
|
|||
|
#define TELEFUNKEN_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * TELEFUNKEN_1_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
|
|||
|
#define TELEFUNKEN_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * TELEFUNKEN_0_PAUSE_TIME * MIN_TOLERANCE_30 + 0.5) - 1)
|
|||
|
#define TELEFUNKEN_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * TELEFUNKEN_0_PAUSE_TIME * MAX_TOLERANCE_30 + 0.5) + 1)
|
|||
|
// autodetect TELEFUNKEN repetition frame within 50 msec:
|
|||
|
// #define TELEFUNKEN_FRAME_REPEAT_PAUSE_LEN_MAX (uint_fast16_t)(F_INTERRUPTS * TELEFUNKEN_FRAME_REPEAT_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5)
|
|||
|
|
|||
|
#define ROOMBA_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * ROOMBA_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define ROOMBA_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * ROOMBA_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define ROOMBA_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * ROOMBA_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define ROOMBA_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * ROOMBA_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define ROOMBA_1_PAUSE_LEN_EXACT ((uint_fast8_t)(F_INTERRUPTS * ROOMBA_1_PAUSE_TIME + 0.5))
|
|||
|
#define ROOMBA_1_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * ROOMBA_1_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define ROOMBA_1_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * ROOMBA_1_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define ROOMBA_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * ROOMBA_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define ROOMBA_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * ROOMBA_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define ROOMBA_0_PAUSE_LEN ((uint_fast8_t)(F_INTERRUPTS * ROOMBA_0_PAUSE_TIME))
|
|||
|
#define ROOMBA_0_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * ROOMBA_0_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define ROOMBA_0_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * ROOMBA_0_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define ROOMBA_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * ROOMBA_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define ROOMBA_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * ROOMBA_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
|
|||
|
#define RCMM32_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RCMM32_START_BIT_PULSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1)
|
|||
|
#define RCMM32_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RCMM32_START_BIT_PULSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1)
|
|||
|
#define RCMM32_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RCMM32_START_BIT_PAUSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1)
|
|||
|
#define RCMM32_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RCMM32_START_BIT_PAUSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1)
|
|||
|
#define RCMM32_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RCMM32_PULSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1)
|
|||
|
#define RCMM32_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RCMM32_PULSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1)
|
|||
|
#define RCMM32_BIT_00_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RCMM32_00_PAUSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1)
|
|||
|
#define RCMM32_BIT_00_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RCMM32_00_PAUSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1)
|
|||
|
#define RCMM32_BIT_01_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RCMM32_01_PAUSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1)
|
|||
|
#define RCMM32_BIT_01_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RCMM32_01_PAUSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1)
|
|||
|
#define RCMM32_BIT_10_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RCMM32_10_PAUSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1)
|
|||
|
#define RCMM32_BIT_10_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RCMM32_10_PAUSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1)
|
|||
|
#define RCMM32_BIT_11_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RCMM32_11_PAUSE_TIME * MIN_TOLERANCE_05 + 0.5) - 1)
|
|||
|
#define RCMM32_BIT_11_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RCMM32_11_PAUSE_TIME * MAX_TOLERANCE_05 + 0.5) + 1)
|
|||
|
|
|||
|
#define PENTAX_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * PENTAX_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define PENTAX_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * PENTAX_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define PENTAX_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * PENTAX_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define PENTAX_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * PENTAX_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define PENTAX_1_PAUSE_LEN_EXACT ((uint_fast8_t)(F_INTERRUPTS * PENTAX_1_PAUSE_TIME + 0.5))
|
|||
|
#define PENTAX_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * PENTAX_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define PENTAX_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * PENTAX_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define PENTAX_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * PENTAX_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define PENTAX_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * PENTAX_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define PENTAX_0_PAUSE_LEN ((uint_fast8_t)(F_INTERRUPTS * PENTAX_0_PAUSE_TIME))
|
|||
|
#define PENTAX_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * PENTAX_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define PENTAX_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * PENTAX_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define PENTAX_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * PENTAX_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define PENTAX_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * PENTAX_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
|
|||
|
#define ACP24_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * ACP24_START_BIT_PULSE_TIME * MIN_TOLERANCE_15 + 0.5) - 1)
|
|||
|
#define ACP24_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * ACP24_START_BIT_PULSE_TIME * MAX_TOLERANCE_15 + 0.5) + 1)
|
|||
|
#define ACP24_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * ACP24_START_BIT_PAUSE_TIME * MIN_TOLERANCE_15 + 0.5) - 1)
|
|||
|
#define ACP24_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * ACP24_START_BIT_PAUSE_TIME * MAX_TOLERANCE_15 + 0.5) + 1)
|
|||
|
#define ACP24_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * ACP24_PULSE_TIME * MIN_TOLERANCE_15 + 0.5) - 1)
|
|||
|
#define ACP24_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * ACP24_PULSE_TIME * MAX_TOLERANCE_15 + 0.5) + 1)
|
|||
|
#define ACP24_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * ACP24_1_PAUSE_TIME * MIN_TOLERANCE_15 + 0.5) - 1)
|
|||
|
#define ACP24_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * ACP24_1_PAUSE_TIME * MAX_TOLERANCE_15 + 0.5) + 1)
|
|||
|
#define ACP24_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * ACP24_0_PAUSE_TIME * MIN_TOLERANCE_15 + 0.5) - 1)
|
|||
|
#define ACP24_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * ACP24_0_PAUSE_TIME * MAX_TOLERANCE_15 + 0.5) + 1)
|
|||
|
|
|||
|
#define RADIO1_START_BIT_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RADIO1_START_BIT_PULSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define RADIO1_START_BIT_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RADIO1_START_BIT_PULSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define RADIO1_START_BIT_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RADIO1_START_BIT_PAUSE_TIME * MIN_TOLERANCE_10 + 0.5) - 1)
|
|||
|
#define RADIO1_START_BIT_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RADIO1_START_BIT_PAUSE_TIME * MAX_TOLERANCE_10 + 0.5) + 1)
|
|||
|
#define RADIO1_1_PAUSE_LEN_EXACT ((uint_fast8_t)(F_INTERRUPTS * RADIO1_1_PAUSE_TIME + 0.5))
|
|||
|
#define RADIO1_1_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RADIO1_1_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define RADIO1_1_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RADIO1_1_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define RADIO1_1_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RADIO1_1_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define RADIO1_1_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RADIO1_1_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define RADIO1_0_PAUSE_LEN ((uint_fast8_t)(F_INTERRUPTS * RADIO1_0_PAUSE_TIME))
|
|||
|
#define RADIO1_0_PULSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RADIO1_0_PULSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define RADIO1_0_PULSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RADIO1_0_PULSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
#define RADIO1_0_PAUSE_LEN_MIN ((uint_fast8_t)(F_INTERRUPTS * RADIO1_0_PAUSE_TIME * MIN_TOLERANCE_20 + 0.5) - 1)
|
|||
|
#define RADIO1_0_PAUSE_LEN_MAX ((uint_fast8_t)(F_INTERRUPTS * RADIO1_0_PAUSE_TIME * MAX_TOLERANCE_20 + 0.5) + 1)
|
|||
|
|
|||
|
#define AUTO_FRAME_REPETITION_LEN (uint_fast16_t)(F_INTERRUPTS * AUTO_FRAME_REPETITION_TIME + 0.5) // use uint_fast16_t!
|
|||
|
|
|||
|
#ifdef ANALYZE
|
|||
|
# define ANALYZE_PUTCHAR(a) { if (! silent) { putchar (a); } }
|
|||
|
# define ANALYZE_ONLY_NORMAL_PUTCHAR(a) { if (! silent && !verbose) { putchar (a); } }
|
|||
|
# define ANALYZE_PRINTF(...) { if (verbose) { printf (__VA_ARGS__); } }
|
|||
|
# define ANALYZE_ONLY_NORMAL_PRINTF(...) { if (! silent && !verbose) { printf (__VA_ARGS__); } }
|
|||
|
# define ANALYZE_NEWLINE() { if (verbose) { putchar ('\n'); } }
|
|||
|
static int silent;
|
|||
|
static int time_counter;
|
|||
|
static int verbose;
|
|||
|
|
|||
|
/******************************* not every PIC compiler knows variadic macros :-(
|
|||
|
#else
|
|||
|
# define ANALYZE_PUTCHAR(a)
|
|||
|
# define ANALYZE_ONLY_NORMAL_PUTCHAR(a)
|
|||
|
# define ANALYZE_PRINTF(...)
|
|||
|
# define ANALYZE_ONLY_NORMAL_PRINTF(...)
|
|||
|
# endif
|
|||
|
# define ANALYZE_NEWLINE()
|
|||
|
*********************************/
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_USE_CALLBACK == 1
|
|||
|
static void (*irmp_callback_ptr) (uint_fast8_t);
|
|||
|
#endif // IRMP_USE_CALLBACK == 1
|
|||
|
|
|||
|
#define PARITY_CHECK_OK 1
|
|||
|
#define PARITY_CHECK_FAILED 0
|
|||
|
|
|||
|
/*---------------------------------------------------------------------------------------------------------------------------------------------------
|
|||
|
* Protocol names
|
|||
|
*---------------------------------------------------------------------------------------------------------------------------------------------------
|
|||
|
*/
|
|||
|
#if defined(UNIX_OR_WINDOWS) || IRMP_PROTOCOL_NAMES == 1
|
|||
|
static const char proto_unknown[] PROGMEM = "UNKNOWN";
|
|||
|
static const char proto_sircs[] PROGMEM = "SIRCS";
|
|||
|
static const char proto_nec[] PROGMEM = "NEC";
|
|||
|
static const char proto_samsung[] PROGMEM = "SAMSUNG";
|
|||
|
static const char proto_matsushita[] PROGMEM = "MATSUSH";
|
|||
|
static const char proto_kaseikyo[] PROGMEM = "KASEIKYO";
|
|||
|
static const char proto_recs80[] PROGMEM = "RECS80";
|
|||
|
static const char proto_rc5[] PROGMEM = "RC5";
|
|||
|
static const char proto_denon[] PROGMEM = "DENON";
|
|||
|
static const char proto_rc6[] PROGMEM = "RC6";
|
|||
|
static const char proto_samsung32[] PROGMEM = "SAMSG32";
|
|||
|
static const char proto_apple[] PROGMEM = "APPLE";
|
|||
|
static const char proto_recs80ext[] PROGMEM = "RECS80EX";
|
|||
|
static const char proto_nubert[] PROGMEM = "NUBERT";
|
|||
|
static const char proto_bang_olufsen[] PROGMEM = "BANG OLU";
|
|||
|
static const char proto_grundig[] PROGMEM = "GRUNDIG";
|
|||
|
static const char proto_nokia[] PROGMEM = "NOKIA";
|
|||
|
static const char proto_siemens[] PROGMEM = "SIEMENS";
|
|||
|
static const char proto_fdc[] PROGMEM = "FDC";
|
|||
|
static const char proto_rccar[] PROGMEM = "RCCAR";
|
|||
|
static const char proto_jvc[] PROGMEM = "JVC";
|
|||
|
static const char proto_rc6a[] PROGMEM = "RC6A";
|
|||
|
static const char proto_nikon[] PROGMEM = "NIKON";
|
|||
|
static const char proto_ruwido[] PROGMEM = "RUWIDO";
|
|||
|
static const char proto_ir60[] PROGMEM = "IR60";
|
|||
|
static const char proto_kathrein[] PROGMEM = "KATHREIN";
|
|||
|
static const char proto_netbox[] PROGMEM = "NETBOX";
|
|||
|
static const char proto_nec16[] PROGMEM = "NEC16";
|
|||
|
static const char proto_nec42[] PROGMEM = "NEC42";
|
|||
|
static const char proto_lego[] PROGMEM = "LEGO";
|
|||
|
static const char proto_thomson[] PROGMEM = "THOMSON";
|
|||
|
static const char proto_bose[] PROGMEM = "BOSE";
|
|||
|
static const char proto_a1tvbox[] PROGMEM = "A1TVBOX";
|
|||
|
static const char proto_ortek[] PROGMEM = "ORTEK";
|
|||
|
static const char proto_telefunken[] PROGMEM = "TELEFUNKEN";
|
|||
|
static const char proto_roomba[] PROGMEM = "ROOMBA";
|
|||
|
static const char proto_rcmm32[] PROGMEM = "RCMM32";
|
|||
|
static const char proto_rcmm24[] PROGMEM = "RCMM24";
|
|||
|
static const char proto_rcmm12[] PROGMEM = "RCMM12";
|
|||
|
static const char proto_speaker[] PROGMEM = "SPEAKER";
|
|||
|
static const char proto_lgair[] PROGMEM = "LGAIR";
|
|||
|
static const char proto_samsung48[] PROGMEM = "SAMSG48";
|
|||
|
static const char proto_merlin[] PROGMEM = "MERLIN";
|
|||
|
static const char proto_pentax[] PROGMEM = "PENTAX";
|
|||
|
static const char proto_fan[] PROGMEM = "FAN";
|
|||
|
static const char proto_s100[] PROGMEM = "S100";
|
|||
|
static const char proto_acp24[] PROGMEM = "ACP24";
|
|||
|
static const char proto_technics[] PROGMEM = "TECHNICS";
|
|||
|
static const char proto_panasonic[] PROGMEM = "PANASONIC";
|
|||
|
static const char proto_mitsu_heavy[] PROGMEM = "MITSU_HEAVY";
|
|||
|
static const char proto_vincent[] PROGMEM = "VINCENT";
|
|||
|
static const char proto_samsungah[] PROGMEM = "SAMSUNGAH";
|
|||
|
|
|||
|
static const char proto_radio1[] PROGMEM = "RADIO1";
|
|||
|
|
|||
|
const char * const
|
|||
|
irmp_protocol_names[IRMP_N_PROTOCOLS + 1] PROGMEM =
|
|||
|
{
|
|||
|
proto_unknown,
|
|||
|
proto_sircs,
|
|||
|
proto_nec,
|
|||
|
proto_samsung,
|
|||
|
proto_matsushita,
|
|||
|
proto_kaseikyo,
|
|||
|
proto_recs80,
|
|||
|
proto_rc5,
|
|||
|
proto_denon,
|
|||
|
proto_rc6,
|
|||
|
proto_samsung32,
|
|||
|
proto_apple,
|
|||
|
proto_recs80ext,
|
|||
|
proto_nubert,
|
|||
|
proto_bang_olufsen,
|
|||
|
proto_grundig,
|
|||
|
proto_nokia,
|
|||
|
proto_siemens,
|
|||
|
proto_fdc,
|
|||
|
proto_rccar,
|
|||
|
proto_jvc,
|
|||
|
proto_rc6a,
|
|||
|
proto_nikon,
|
|||
|
proto_ruwido,
|
|||
|
proto_ir60,
|
|||
|
proto_kathrein,
|
|||
|
proto_netbox,
|
|||
|
proto_nec16,
|
|||
|
proto_nec42,
|
|||
|
proto_lego,
|
|||
|
proto_thomson,
|
|||
|
proto_bose,
|
|||
|
proto_a1tvbox,
|
|||
|
proto_ortek,
|
|||
|
proto_telefunken,
|
|||
|
proto_roomba,
|
|||
|
proto_rcmm32,
|
|||
|
proto_rcmm24,
|
|||
|
proto_rcmm12,
|
|||
|
proto_speaker,
|
|||
|
proto_lgair,
|
|||
|
proto_samsung48,
|
|||
|
proto_merlin,
|
|||
|
proto_pentax,
|
|||
|
proto_fan,
|
|||
|
proto_s100,
|
|||
|
proto_acp24,
|
|||
|
proto_technics,
|
|||
|
proto_panasonic,
|
|||
|
proto_mitsu_heavy,
|
|||
|
proto_vincent,
|
|||
|
proto_samsungah,
|
|||
|
proto_radio1
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
/*---------------------------------------------------------------------------------------------------------------------------------------------------
|
|||
|
* Logging
|
|||
|
*---------------------------------------------------------------------------------------------------------------------------------------------------
|
|||
|
*/
|
|||
|
#if IRMP_LOGGING == 1 // logging via UART
|
|||
|
|
|||
|
#if defined(ARM_STM32F4XX)
|
|||
|
# define STM32_GPIO_CLOCK RCC_AHB1Periph_GPIOA // UART2 on PA2
|
|||
|
# define STM32_UART_CLOCK RCC_APB1Periph_USART2
|
|||
|
# define STM32_GPIO_PORT GPIOA
|
|||
|
# define STM32_GPIO_PIN GPIO_Pin_2
|
|||
|
# define STM32_GPIO_SOURCE GPIO_PinSource2
|
|||
|
# define STM32_UART_AF GPIO_AF_USART2
|
|||
|
# define STM32_UART_COM USART2
|
|||
|
# define STM32_UART_BAUD 115200 // 115200 Baud
|
|||
|
# include "stm32f4xx_usart.h"
|
|||
|
#elif defined(ARM_STM32F10X)
|
|||
|
# define STM32_UART_COM USART3 // UART3 on PB10
|
|||
|
#elif defined(ARDUINO) // Arduino Serial implementation
|
|||
|
# if defined(USB_SERIAL)
|
|||
|
# include "usb_serial.h"
|
|||
|
# else
|
|||
|
# error USB_SERIAL not defined in ARDUINO Environment
|
|||
|
# endif
|
|||
|
#else
|
|||
|
# if IRMP_EXT_LOGGING == 1 // use external logging
|
|||
|
# include "irmpextlog.h"
|
|||
|
# else // normal UART log (IRMP_EXT_LOGGING == 0)
|
|||
|
# define BAUD 9600L
|
|||
|
# ifndef UNIX_OR_WINDOWS
|
|||
|
# include <util/setbaud.h>
|
|||
|
# endif
|
|||
|
|
|||
|
#ifdef UBRR0H
|
|||
|
|
|||
|
#define UART0_UBRRH UBRR0H
|
|||
|
#define UART0_UBRRL UBRR0L
|
|||
|
#define UART0_UCSRA UCSR0A
|
|||
|
#define UART0_UCSRB UCSR0B
|
|||
|
#define UART0_UCSRC UCSR0C
|
|||
|
#define UART0_UDRE_BIT_VALUE (1<<UDRE0)
|
|||
|
#define UART0_UCSZ1_BIT_VALUE (1<<UCSZ01)
|
|||
|
#define UART0_UCSZ0_BIT_VALUE (1<<UCSZ00)
|
|||
|
#ifdef URSEL0
|
|||
|
#define UART0_URSEL_BIT_VALUE (1<<URSEL0)
|
|||
|
#else
|
|||
|
#define UART0_URSEL_BIT_VALUE (0)
|
|||
|
#endif
|
|||
|
#define UART0_TXEN_BIT_VALUE (1<<TXEN0)
|
|||
|
#define UART0_UDR UDR0
|
|||
|
#define UART0_U2X U2X0
|
|||
|
|
|||
|
#else
|
|||
|
|
|||
|
#define UART0_UBRRH UBRRH
|
|||
|
#define UART0_UBRRL UBRRL
|
|||
|
#define UART0_UCSRA UCSRA
|
|||
|
#define UART0_UCSRB UCSRB
|
|||
|
#define UART0_UCSRC UCSRC
|
|||
|
#define UART0_UDRE_BIT_VALUE (1<<UDRE)
|
|||
|
#define UART0_UCSZ1_BIT_VALUE (1<<UCSZ1)
|
|||
|
#define UART0_UCSZ0_BIT_VALUE (1<<UCSZ0)
|
|||
|
#ifdef URSEL
|
|||
|
#define UART0_URSEL_BIT_VALUE (1<<URSEL)
|
|||
|
#else
|
|||
|
#define UART0_URSEL_BIT_VALUE (0)
|
|||
|
#endif
|
|||
|
#define UART0_TXEN_BIT_VALUE (1<<TXEN)
|
|||
|
#define UART0_UDR UDR
|
|||
|
#define UART0_U2X U2X
|
|||
|
|
|||
|
#endif //UBRR0H
|
|||
|
#endif //IRMP_EXT_LOGGING
|
|||
|
#endif //ARM_STM32F4XX
|
|||
|
|
|||
|
/*---------------------------------------------------------------------------------------------------------------------------------------------------
|
|||
|
* Initialize UART
|
|||
|
* @details Initializes UART
|
|||
|
*---------------------------------------------------------------------------------------------------------------------------------------------------
|
|||
|
*/
|
|||
|
void
|
|||
|
irmp_uart_init (void)
|
|||
|
{
|
|||
|
#ifndef UNIX_OR_WINDOWS
|
|||
|
#if defined(ARM_STM32F4XX)
|
|||
|
GPIO_InitTypeDef GPIO_InitStructure;
|
|||
|
USART_InitTypeDef USART_InitStructure;
|
|||
|
|
|||
|
// Clock enable vom TX Pin
|
|||
|
RCC_AHB1PeriphClockCmd(STM32_GPIO_CLOCK, ENABLE);
|
|||
|
|
|||
|
// Clock enable der UART
|
|||
|
RCC_APB1PeriphClockCmd(STM32_UART_CLOCK, ENABLE);
|
|||
|
|
|||
|
// UART Alternative-Funktion mit dem IO-Pin verbinden
|
|||
|
GPIO_PinAFConfig(STM32_GPIO_PORT,STM32_GPIO_SOURCE,STM32_UART_AF);
|
|||
|
|
|||
|
// UART als Alternative-Funktion mit PushPull
|
|||
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
|
|||
|
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
|
|||
|
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
|
|||
|
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP;
|
|||
|
|
|||
|
// TX-Pin
|
|||
|
GPIO_InitStructure.GPIO_Pin = STM32_GPIO_PIN;
|
|||
|
GPIO_Init(STM32_GPIO_PORT, &GPIO_InitStructure);
|
|||
|
|
|||
|
// Oversampling
|
|||
|
USART_OverSampling8Cmd(STM32_UART_COM, ENABLE);
|
|||
|
|
|||
|
// init baud rate, 8 data bits, 1 stop bit, no parity, no RTS+CTS
|
|||
|
USART_InitStructure.USART_BaudRate = STM32_UART_BAUD;
|
|||
|
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
|
|||
|
USART_InitStructure.USART_StopBits = USART_StopBits_1;
|
|||
|
USART_InitStructure.USART_Parity = USART_Parity_No;
|
|||
|
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
|
|||
|
USART_InitStructure.USART_Mode = USART_Mode_Tx;
|
|||
|
USART_Init(STM32_UART_COM, &USART_InitStructure);
|
|||
|
|
|||
|
// UART enable
|
|||
|
USART_Cmd(STM32_UART_COM, ENABLE);
|
|||
|
|
|||
|
#elif defined(ARM_STM32F10X)
|
|||
|
GPIO_InitTypeDef GPIO_InitStructure;
|
|||
|
USART_InitTypeDef USART_InitStructure;
|
|||
|
|
|||
|
// Clock enable vom TX Pin
|
|||
|
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE); // UART3 an PB10
|
|||
|
|
|||
|
// Clock enable der UART
|
|||
|
RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART3, ENABLE);
|
|||
|
|
|||
|
// UART als Alternative-Funktion mit PushPull
|
|||
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
|
|||
|
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
|
|||
|
|
|||
|
// TX-Pin
|
|||
|
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
|
|||
|
GPIO_Init(GPIOB, &GPIO_InitStructure);
|
|||
|
|
|||
|
// Oversampling
|
|||
|
USART_OverSampling8Cmd(STM32_UART_COM, ENABLE);
|
|||
|
|
|||
|
// init baud rate, 8 data bits, 1 stop bit, no parity, no RTS+CTS
|
|||
|
USART_InitStructure.USART_BaudRate = 115200;
|
|||
|
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
|
|||
|
USART_InitStructure.USART_StopBits = USART_StopBits_1;
|
|||
|
USART_InitStructure.USART_Parity = USART_Parity_No;
|
|||
|
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
|
|||
|
USART_InitStructure.USART_Mode = USART_Mode_Tx;
|
|||
|
USART_Init(STM32_UART_COM, &USART_InitStructure);
|
|||
|
|
|||
|
// UART enable
|
|||
|
USART_Cmd(STM32_UART_COM, ENABLE);
|
|||
|
|
|||
|
#elif defined(ARDUINO)
|
|||
|
// we use the Arduino Serial Imlementation
|
|||
|
// you have to call Serial.begin(SER_BAUD); in Arduino setup() function
|
|||
|
|
|||
|
#elif defined (__AVR_XMEGA__)
|
|||
|
|
|||
|
PMIC.CTRL |= PMIC_HILVLEN_bm;
|
|||
|
|
|||
|
USARTC1.BAUDCTRLB = 0;
|
|||
|
USARTC1.BAUDCTRLA = F_CPU / 153600 - 1;
|
|||
|
USARTC1.CTRLA = USART_RXCINTLVL_HI_gc; // high INT level (receive)
|
|||
|
USARTC1.CTRLB = USART_TXEN_bm | USART_RXEN_bm; // activated RX and TX
|
|||
|
USARTC1.CTRLC = USART_CHSIZE_8BIT_gc; // 8 Bit
|
|||
|
PORTC.DIR |= (1<<7); // TXD is output
|
|||
|
PORTC.DIR &= ~(1<<6);
|
|||
|
|
|||
|
#else
|
|||
|
|
|||
|
#if (IRMP_EXT_LOGGING == 0) // use UART
|
|||
|
UART0_UBRRH = UBRRH_VALUE; // set baud rate
|
|||
|
UART0_UBRRL = UBRRL_VALUE;
|
|||
|
|
|||
|
#if USE_2X
|
|||
|
UART0_UCSRA |= (1<<UART0_U2X);
|
|||
|
#else
|
|||
|
UART0_UCSRA &= ~(1<<UART0_U2X);
|
|||
|
#endif
|
|||
|
|
|||
|
UART0_UCSRC = UART0_UCSZ1_BIT_VALUE | UART0_UCSZ0_BIT_VALUE | UART0_URSEL_BIT_VALUE;
|
|||
|
UART0_UCSRB |= UART0_TXEN_BIT_VALUE; // enable UART TX
|
|||
|
#else // other log method
|
|||
|
initextlog();
|
|||
|
#endif //IRMP_EXT_LOGGING
|
|||
|
#endif //ARM_STM32F4XX
|
|||
|
#endif // UNIX_OR_WINDOWS
|
|||
|
}
|
|||
|
|
|||
|
/*---------------------------------------------------------------------------------------------------------------------------------------------------
|
|||
|
* Send character
|
|||
|
* @details Sends character
|
|||
|
* @param ch character to be transmitted
|
|||
|
*---------------------------------------------------------------------------------------------------------------------------------------------------
|
|||
|
*/
|
|||
|
void
|
|||
|
irmp_uart_putc (unsigned char ch)
|
|||
|
{
|
|||
|
#ifndef UNIX_OR_WINDOWS
|
|||
|
#if defined(ARM_STM32F4XX) || defined(ARM_STM32F10X)
|
|||
|
// warten bis altes Byte gesendet wurde
|
|||
|
while (USART_GetFlagStatus(STM32_UART_COM, USART_FLAG_TXE) == RESET)
|
|||
|
{
|
|||
|
;
|
|||
|
}
|
|||
|
|
|||
|
USART_SendData(STM32_UART_COM, ch);
|
|||
|
|
|||
|
if (ch == '\n')
|
|||
|
{
|
|||
|
while (USART_GetFlagStatus(STM32_UART_COM, USART_FLAG_TXE) == RESET);
|
|||
|
USART_SendData(STM32_UART_COM, '\r');
|
|||
|
}
|
|||
|
|
|||
|
#elif defined(ARDUINO)
|
|||
|
// we use the Arduino Serial Imlementation
|
|||
|
usb_serial_putchar(ch);
|
|||
|
|
|||
|
#else
|
|||
|
#if (IRMP_EXT_LOGGING == 0)
|
|||
|
|
|||
|
# if defined (__AVR_XMEGA__)
|
|||
|
while (!(USARTC1.STATUS & USART_DREIF_bm))
|
|||
|
{
|
|||
|
;
|
|||
|
}
|
|||
|
|
|||
|
USARTC1.DATA = ch;
|
|||
|
|
|||
|
# else // AVR_MEGA
|
|||
|
while (!(UART0_UCSRA & UART0_UDRE_BIT_VALUE))
|
|||
|
{
|
|||
|
;
|
|||
|
}
|
|||
|
|
|||
|
UART0_UDR = ch;
|
|||
|
|
|||
|
# endif // __AVR_XMEGA__
|
|||
|
|
|||
|
#else
|
|||
|
|
|||
|
sendextlog(ch); // use external log
|
|||
|
|
|||
|
#endif // IRMP_EXT_LOGGING
|
|||
|
#endif // ARM_STM32F4XX
|
|||
|
#else
|
|||
|
fputc (ch, stderr);
|
|||
|
#endif // UNIX_OR_WINDOWS
|
|||
|
}
|
|||
|
|
|||
|
/*---------------------------------------------------------------------------------------------------------------------------------------------------
|
|||
|
* Log IR signal
|
|||
|
*---------------------------------------------------------------------------------------------------------------------------------------------------
|
|||
|
*/
|
|||
|
|
|||
|
#define STARTCYCLES 2 // min count of zeros before start of logging
|
|||
|
#define ENDBITS 1000 // number of sequenced highbits to detect end
|
|||
|
#define DATALEN 700 // log buffer size
|
|||
|
|
|||
|
static void
|
|||
|
irmp_log (uint_fast8_t val)
|
|||
|
{
|
|||
|
static uint8_t buf[DATALEN]; // logging buffer
|
|||
|
static uint_fast16_t buf_idx; // index
|
|||
|
static uint_fast8_t startcycles; // current number of start-zeros
|
|||
|
static uint_fast16_t cnt; // counts sequenced highbits - to detect end
|
|||
|
static uint_fast8_t last_val = 1;
|
|||
|
|
|||
|
if (! val && (startcycles < STARTCYCLES) && !buf_idx) // prevent that single random zeros init logging
|
|||
|
{
|
|||
|
startcycles++;
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
startcycles = 0;
|
|||
|
|
|||
|
if (! val || buf_idx != 0) // start or continue logging on "0", "1" cannot init logging
|
|||
|
{
|
|||
|
if (last_val == val)
|
|||
|
{
|
|||
|
cnt++;
|
|||
|
|
|||
|
if (val && cnt > ENDBITS) // if high received then look at log-stop condition
|
|||
|
{ // if stop condition is true, output on uart
|
|||
|
uint_fast8_t i8;
|
|||
|
uint_fast16_t i;
|
|||
|
uint_fast16_t j;
|
|||
|
uint_fast8_t v = '1';
|
|||
|
uint_fast16_t d;
|
|||
|
|
|||
|
for (i8 = 0; i8 < STARTCYCLES; i8++)
|
|||
|
{
|
|||
|
irmp_uart_putc ('0'); // the ignored starting zeros
|
|||
|
}
|
|||
|
|
|||
|
for (i = 0; i < buf_idx; i++)
|
|||
|
{
|
|||
|
d = buf[i];
|
|||
|
|
|||
|
if (d == 0xff)
|
|||
|
{
|
|||
|
i++;
|
|||
|
d = buf[i];
|
|||
|
i++;
|
|||
|
d |= ((uint_fast16_t) buf[i] << 8);
|
|||
|
}
|
|||
|
|
|||
|
for (j = 0; j < d; j++)
|
|||
|
{
|
|||
|
irmp_uart_putc (v);
|
|||
|
}
|
|||
|
|
|||
|
v = (v == '1') ? '0' : '1';
|
|||
|
}
|
|||
|
|
|||
|
for (i8 = 0; i8 < 20; i8++)
|
|||
|
{
|
|||
|
irmp_uart_putc ('1');
|
|||
|
}
|
|||
|
|
|||
|
irmp_uart_putc ('\n');
|
|||
|
buf_idx = 0;
|
|||
|
last_val = 1;
|
|||
|
cnt = 0;
|
|||
|
}
|
|||
|
}
|
|||
|
else if (buf_idx < DATALEN - 3)
|
|||
|
{
|
|||
|
if (cnt >= 0xff)
|
|||
|
{
|
|||
|
buf[buf_idx++] = 0xff;
|
|||
|
buf[buf_idx++] = (cnt & 0xff);
|
|||
|
buf[buf_idx] = (cnt >> 8);
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
buf[buf_idx] = cnt;
|
|||
|
}
|
|||
|
|
|||
|
buf_idx++;
|
|||
|
cnt = 1;
|
|||
|
last_val = val;
|
|||
|
}
|
|||
|
}
|
|||
|
}
|
|||
|
}
|
|||
|
|
|||
|
#else
|
|||
|
#define irmp_log(val)
|
|||
|
#endif //IRMP_LOGGING
|
|||
|
|
|||
|
typedef struct
|
|||
|
{
|
|||
|
uint_fast8_t protocol; // ir protocol
|
|||
|
uint_fast8_t pulse_1_len_min; // minimum length of pulse with bit value 1
|
|||
|
uint_fast8_t pulse_1_len_max; // maximum length of pulse with bit value 1
|
|||
|
uint_fast8_t pause_1_len_min; // minimum length of pause with bit value 1
|
|||
|
uint_fast8_t pause_1_len_max; // maximum length of pause with bit value 1
|
|||
|
uint_fast8_t pulse_0_len_min; // minimum length of pulse with bit value 0
|
|||
|
uint_fast8_t pulse_0_len_max; // maximum length of pulse with bit value 0
|
|||
|
uint_fast8_t pause_0_len_min; // minimum length of pause with bit value 0
|
|||
|
uint_fast8_t pause_0_len_max; // maximum length of pause with bit value 0
|
|||
|
uint_fast8_t address_offset; // address offset
|
|||
|
uint_fast8_t address_end; // end of address
|
|||
|
uint_fast8_t command_offset; // command offset
|
|||
|
uint_fast8_t command_end; // end of command
|
|||
|
uint_fast8_t complete_len; // complete length of frame
|
|||
|
uint_fast8_t stop_bit; // flag: frame has stop bit
|
|||
|
uint_fast8_t lsb_first; // flag: LSB first
|
|||
|
uint_fast8_t flags; // some flags
|
|||
|
} IRMP_PARAMETER;
|
|||
|
|
|||
|
#if IRMP_SUPPORT_SIRCS_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER sircs_param =
|
|||
|
{
|
|||
|
IRMP_SIRCS_PROTOCOL, // protocol: ir protocol
|
|||
|
SIRCS_1_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
|
|||
|
SIRCS_1_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
|
|||
|
SIRCS_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
|
|||
|
SIRCS_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
|
|||
|
SIRCS_0_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
|
|||
|
SIRCS_0_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
|
|||
|
SIRCS_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
|
|||
|
SIRCS_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
|
|||
|
SIRCS_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
SIRCS_ADDRESS_OFFSET + SIRCS_ADDRESS_LEN, // address_end: end of address
|
|||
|
SIRCS_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
SIRCS_COMMAND_OFFSET + SIRCS_COMMAND_LEN, // command_end: end of command
|
|||
|
SIRCS_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
SIRCS_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
SIRCS_LSB, // lsb_first: flag: LSB first
|
|||
|
SIRCS_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_NEC_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER nec_param =
|
|||
|
{
|
|||
|
IRMP_NEC_PROTOCOL, // protocol: ir protocol
|
|||
|
NEC_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
|
|||
|
NEC_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
|
|||
|
NEC_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
|
|||
|
NEC_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
|
|||
|
NEC_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
|
|||
|
NEC_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
|
|||
|
NEC_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
|
|||
|
NEC_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
|
|||
|
NEC_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
NEC_ADDRESS_OFFSET + NEC_ADDRESS_LEN, // address_end: end of address
|
|||
|
NEC_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
NEC_COMMAND_OFFSET + NEC_COMMAND_LEN, // command_end: end of command
|
|||
|
NEC_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
NEC_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
NEC_LSB, // lsb_first: flag: LSB first
|
|||
|
NEC_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER nec_rep_param =
|
|||
|
{
|
|||
|
IRMP_NEC_PROTOCOL, // protocol: ir protocol
|
|||
|
NEC_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
|
|||
|
NEC_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
|
|||
|
NEC_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
|
|||
|
NEC_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
|
|||
|
NEC_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
|
|||
|
NEC_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
|
|||
|
NEC_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
|
|||
|
NEC_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
|
|||
|
0, // address_offset: address offset
|
|||
|
0, // address_end: end of address
|
|||
|
0, // command_offset: command offset
|
|||
|
0, // command_end: end of command
|
|||
|
0, // complete_len: complete length of frame
|
|||
|
NEC_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
NEC_LSB, // lsb_first: flag: LSB first
|
|||
|
NEC_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_NEC42_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER nec42_param =
|
|||
|
{
|
|||
|
IRMP_NEC42_PROTOCOL, // protocol: ir protocol
|
|||
|
NEC_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
|
|||
|
NEC_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
|
|||
|
NEC_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
|
|||
|
NEC_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
|
|||
|
NEC_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
|
|||
|
NEC_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
|
|||
|
NEC_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
|
|||
|
NEC_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
|
|||
|
NEC42_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
NEC42_ADDRESS_OFFSET + NEC42_ADDRESS_LEN, // address_end: end of address
|
|||
|
NEC42_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
NEC42_COMMAND_OFFSET + NEC42_COMMAND_LEN, // command_end: end of command
|
|||
|
NEC42_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
NEC_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
NEC_LSB, // lsb_first: flag: LSB first
|
|||
|
NEC_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_LGAIR_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER lgair_param =
|
|||
|
{
|
|||
|
IRMP_LGAIR_PROTOCOL, // protocol: ir protocol
|
|||
|
NEC_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
|
|||
|
NEC_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
|
|||
|
NEC_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
|
|||
|
NEC_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
|
|||
|
NEC_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
|
|||
|
NEC_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
|
|||
|
NEC_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
|
|||
|
NEC_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
|
|||
|
LGAIR_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
LGAIR_ADDRESS_OFFSET + LGAIR_ADDRESS_LEN, // address_end: end of address
|
|||
|
LGAIR_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
LGAIR_COMMAND_OFFSET + LGAIR_COMMAND_LEN, // command_end: end of command
|
|||
|
LGAIR_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
NEC_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
NEC_LSB, // lsb_first: flag: LSB first
|
|||
|
NEC_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER samsung_param =
|
|||
|
{
|
|||
|
IRMP_SAMSUNG_PROTOCOL, // protocol: ir protocol
|
|||
|
SAMSUNG_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
|
|||
|
SAMSUNG_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
|
|||
|
SAMSUNG_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
|
|||
|
SAMSUNG_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
|
|||
|
SAMSUNG_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
|
|||
|
SAMSUNG_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
|
|||
|
SAMSUNG_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
|
|||
|
SAMSUNG_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
|
|||
|
SAMSUNG_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
SAMSUNG_ADDRESS_OFFSET + SAMSUNG_ADDRESS_LEN, // address_end: end of address
|
|||
|
SAMSUNG_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
SAMSUNG_COMMAND_OFFSET + SAMSUNG_COMMAND_LEN, // command_end: end of command
|
|||
|
SAMSUNG_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
SAMSUNG_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
SAMSUNG_LSB, // lsb_first: flag: LSB first
|
|||
|
SAMSUNG_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_SAMSUNGAH_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER samsungah_param =
|
|||
|
{
|
|||
|
IRMP_SAMSUNGAH_PROTOCOL, // protocol: ir protocol
|
|||
|
SAMSUNGAH_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
|
|||
|
SAMSUNGAH_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
|
|||
|
SAMSUNGAH_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
|
|||
|
SAMSUNGAH_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
|
|||
|
SAMSUNGAH_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
|
|||
|
SAMSUNGAH_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
|
|||
|
SAMSUNGAH_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
|
|||
|
SAMSUNGAH_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
|
|||
|
SAMSUNGAH_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
SAMSUNGAH_ADDRESS_OFFSET + SAMSUNGAH_ADDRESS_LEN, // address_end: end of address
|
|||
|
SAMSUNGAH_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
SAMSUNGAH_COMMAND_OFFSET + SAMSUNGAH_COMMAND_LEN, // command_end: end of command
|
|||
|
SAMSUNGAH_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
SAMSUNGAH_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
SAMSUNGAH_LSB, // lsb_first: flag: LSB first
|
|||
|
SAMSUNGAH_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_TELEFUNKEN_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER telefunken_param =
|
|||
|
{
|
|||
|
IRMP_TELEFUNKEN_PROTOCOL, // protocol: ir protocol
|
|||
|
TELEFUNKEN_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
|
|||
|
TELEFUNKEN_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
|
|||
|
TELEFUNKEN_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
|
|||
|
TELEFUNKEN_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
|
|||
|
TELEFUNKEN_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
|
|||
|
TELEFUNKEN_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
|
|||
|
TELEFUNKEN_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
|
|||
|
TELEFUNKEN_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
|
|||
|
TELEFUNKEN_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
TELEFUNKEN_ADDRESS_OFFSET + TELEFUNKEN_ADDRESS_LEN, // address_end: end of address
|
|||
|
TELEFUNKEN_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
TELEFUNKEN_COMMAND_OFFSET + TELEFUNKEN_COMMAND_LEN, // command_end: end of command
|
|||
|
TELEFUNKEN_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
TELEFUNKEN_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
TELEFUNKEN_LSB, // lsb_first: flag: LSB first
|
|||
|
TELEFUNKEN_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_MATSUSHITA_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER matsushita_param =
|
|||
|
{
|
|||
|
IRMP_MATSUSHITA_PROTOCOL, // protocol: ir protocol
|
|||
|
MATSUSHITA_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
|
|||
|
MATSUSHITA_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
|
|||
|
MATSUSHITA_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
|
|||
|
MATSUSHITA_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
|
|||
|
MATSUSHITA_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
|
|||
|
MATSUSHITA_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
|
|||
|
MATSUSHITA_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
|
|||
|
MATSUSHITA_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
|
|||
|
MATSUSHITA_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
MATSUSHITA_ADDRESS_OFFSET + MATSUSHITA_ADDRESS_LEN, // address_end: end of address
|
|||
|
MATSUSHITA_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
MATSUSHITA_COMMAND_OFFSET + MATSUSHITA_COMMAND_LEN, // command_end: end of command
|
|||
|
MATSUSHITA_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
MATSUSHITA_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
MATSUSHITA_LSB, // lsb_first: flag: LSB first
|
|||
|
MATSUSHITA_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_KASEIKYO_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER kaseikyo_param =
|
|||
|
{
|
|||
|
IRMP_KASEIKYO_PROTOCOL, // protocol: ir protocol
|
|||
|
KASEIKYO_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
|
|||
|
KASEIKYO_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
|
|||
|
KASEIKYO_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
|
|||
|
KASEIKYO_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
|
|||
|
KASEIKYO_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
|
|||
|
KASEIKYO_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
|
|||
|
KASEIKYO_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
|
|||
|
KASEIKYO_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
|
|||
|
KASEIKYO_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
KASEIKYO_ADDRESS_OFFSET + KASEIKYO_ADDRESS_LEN, // address_end: end of address
|
|||
|
KASEIKYO_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
KASEIKYO_COMMAND_OFFSET + KASEIKYO_COMMAND_LEN, // command_end: end of command
|
|||
|
KASEIKYO_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
KASEIKYO_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
KASEIKYO_LSB, // lsb_first: flag: LSB first
|
|||
|
KASEIKYO_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_PANASONIC_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER panasonic_param =
|
|||
|
{
|
|||
|
IRMP_PANASONIC_PROTOCOL, // protocol: ir protocol
|
|||
|
PANASONIC_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
|
|||
|
PANASONIC_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
|
|||
|
PANASONIC_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
|
|||
|
PANASONIC_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
|
|||
|
PANASONIC_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
|
|||
|
PANASONIC_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
|
|||
|
PANASONIC_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
|
|||
|
PANASONIC_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
|
|||
|
PANASONIC_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
PANASONIC_ADDRESS_OFFSET + PANASONIC_ADDRESS_LEN, // address_end: end of address
|
|||
|
PANASONIC_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
PANASONIC_COMMAND_OFFSET + PANASONIC_COMMAND_LEN, // command_end: end of command
|
|||
|
PANASONIC_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
PANASONIC_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
PANASONIC_LSB, // lsb_first: flag: LSB first
|
|||
|
PANASONIC_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_MITSU_HEAVY_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER mitsu_heavy_param =
|
|||
|
{
|
|||
|
IRMP_MITSU_HEAVY_PROTOCOL, // protocol: ir protocol
|
|||
|
MITSU_HEAVY_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
|
|||
|
MITSU_HEAVY_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
|
|||
|
MITSU_HEAVY_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
|
|||
|
MITSU_HEAVY_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
|
|||
|
MITSU_HEAVY_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
|
|||
|
MITSU_HEAVY_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
|
|||
|
MITSU_HEAVY_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
|
|||
|
MITSU_HEAVY_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
|
|||
|
MITSU_HEAVY_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
MITSU_HEAVY_ADDRESS_OFFSET + MITSU_HEAVY_ADDRESS_LEN, // address_end: end of address
|
|||
|
MITSU_HEAVY_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
MITSU_HEAVY_COMMAND_OFFSET + MITSU_HEAVY_COMMAND_LEN, // command_end: end of command
|
|||
|
MITSU_HEAVY_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
MITSU_HEAVY_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
MITSU_HEAVY_LSB, // lsb_first: flag: LSB first
|
|||
|
MITSU_HEAVY_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_VINCENT_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER vincent_param =
|
|||
|
{
|
|||
|
IRMP_VINCENT_PROTOCOL, // protocol: ir protocol
|
|||
|
VINCENT_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
|
|||
|
VINCENT_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
|
|||
|
VINCENT_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
|
|||
|
VINCENT_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
|
|||
|
VINCENT_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
|
|||
|
VINCENT_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
|
|||
|
VINCENT_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
|
|||
|
VINCENT_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
|
|||
|
VINCENT_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
VINCENT_ADDRESS_OFFSET + VINCENT_ADDRESS_LEN, // address_end: end of address
|
|||
|
VINCENT_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
VINCENT_COMMAND_OFFSET + VINCENT_COMMAND_LEN, // command_end: end of command
|
|||
|
VINCENT_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
VINCENT_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
VINCENT_LSB, // lsb_first: flag: LSB first
|
|||
|
VINCENT_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_RECS80_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER recs80_param =
|
|||
|
{
|
|||
|
IRMP_RECS80_PROTOCOL, // protocol: ir protocol
|
|||
|
RECS80_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
|
|||
|
RECS80_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
|
|||
|
RECS80_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
|
|||
|
RECS80_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
|
|||
|
RECS80_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
|
|||
|
RECS80_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
|
|||
|
RECS80_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
|
|||
|
RECS80_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
|
|||
|
RECS80_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
RECS80_ADDRESS_OFFSET + RECS80_ADDRESS_LEN, // address_end: end of address
|
|||
|
RECS80_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
RECS80_COMMAND_OFFSET + RECS80_COMMAND_LEN, // command_end: end of command
|
|||
|
RECS80_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
RECS80_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
RECS80_LSB, // lsb_first: flag: LSB first
|
|||
|
RECS80_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_RC5_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER rc5_param =
|
|||
|
{
|
|||
|
IRMP_RC5_PROTOCOL, // protocol: ir protocol
|
|||
|
RC5_BIT_LEN_MIN, // pulse_1_len_min: here: minimum length of short pulse
|
|||
|
RC5_BIT_LEN_MAX, // pulse_1_len_max: here: maximum length of short pulse
|
|||
|
RC5_BIT_LEN_MIN, // pause_1_len_min: here: minimum length of short pause
|
|||
|
RC5_BIT_LEN_MAX, // pause_1_len_max: here: maximum length of short pause
|
|||
|
0, // pulse_0_len_min: here: not used
|
|||
|
0, // pulse_0_len_max: here: not used
|
|||
|
0, // pause_0_len_min: here: not used
|
|||
|
0, // pause_0_len_max: here: not used
|
|||
|
RC5_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
RC5_ADDRESS_OFFSET + RC5_ADDRESS_LEN, // address_end: end of address
|
|||
|
RC5_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
RC5_COMMAND_OFFSET + RC5_COMMAND_LEN, // command_end: end of command
|
|||
|
RC5_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
RC5_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
RC5_LSB, // lsb_first: flag: LSB first
|
|||
|
RC5_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_S100_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER s100_param =
|
|||
|
{
|
|||
|
IRMP_S100_PROTOCOL, // protocol: ir protocol
|
|||
|
S100_BIT_LEN_MIN, // pulse_1_len_min: here: minimum length of short pulse
|
|||
|
S100_BIT_LEN_MAX, // pulse_1_len_max: here: maximum length of short pulse
|
|||
|
S100_BIT_LEN_MIN, // pause_1_len_min: here: minimum length of short pause
|
|||
|
S100_BIT_LEN_MAX, // pause_1_len_max: here: maximum length of short pause
|
|||
|
0, // pulse_0_len_min: here: not used
|
|||
|
0, // pulse_0_len_max: here: not used
|
|||
|
0, // pause_0_len_min: here: not used
|
|||
|
0, // pause_0_len_max: here: not used
|
|||
|
S100_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
S100_ADDRESS_OFFSET + S100_ADDRESS_LEN, // address_end: end of address
|
|||
|
S100_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
S100_COMMAND_OFFSET + S100_COMMAND_LEN, // command_end: end of command
|
|||
|
S100_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
S100_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
S100_LSB, // lsb_first: flag: LSB first
|
|||
|
S100_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_DENON_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER denon_param =
|
|||
|
{
|
|||
|
IRMP_DENON_PROTOCOL, // protocol: ir protocol
|
|||
|
DENON_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
|
|||
|
DENON_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
|
|||
|
DENON_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
|
|||
|
DENON_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
|
|||
|
DENON_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
|
|||
|
DENON_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
|
|||
|
DENON_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
|
|||
|
DENON_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
|
|||
|
DENON_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
DENON_ADDRESS_OFFSET + DENON_ADDRESS_LEN, // address_end: end of address
|
|||
|
DENON_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
DENON_COMMAND_OFFSET + DENON_COMMAND_LEN, // command_end: end of command
|
|||
|
DENON_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
DENON_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
DENON_LSB, // lsb_first: flag: LSB first
|
|||
|
DENON_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_RC6_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER rc6_param =
|
|||
|
{
|
|||
|
IRMP_RC6_PROTOCOL, // protocol: ir protocol
|
|||
|
|
|||
|
RC6_BIT_PULSE_LEN_MIN, // pulse_1_len_min: here: minimum length of short pulse
|
|||
|
RC6_BIT_PULSE_LEN_MAX, // pulse_1_len_max: here: maximum length of short pulse
|
|||
|
RC6_BIT_PAUSE_LEN_MIN, // pause_1_len_min: here: minimum length of short pause
|
|||
|
RC6_BIT_PAUSE_LEN_MAX, // pause_1_len_max: here: maximum length of short pause
|
|||
|
0, // pulse_0_len_min: here: not used
|
|||
|
0, // pulse_0_len_max: here: not used
|
|||
|
0, // pause_0_len_min: here: not used
|
|||
|
0, // pause_0_len_max: here: not used
|
|||
|
RC6_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
RC6_ADDRESS_OFFSET + RC6_ADDRESS_LEN, // address_end: end of address
|
|||
|
RC6_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
RC6_COMMAND_OFFSET + RC6_COMMAND_LEN, // command_end: end of command
|
|||
|
RC6_COMPLETE_DATA_LEN_SHORT, // complete_len: complete length of frame
|
|||
|
RC6_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
RC6_LSB, // lsb_first: flag: LSB first
|
|||
|
RC6_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_RECS80EXT_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER recs80ext_param =
|
|||
|
{
|
|||
|
IRMP_RECS80EXT_PROTOCOL, // protocol: ir protocol
|
|||
|
RECS80EXT_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
|
|||
|
RECS80EXT_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
|
|||
|
RECS80EXT_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
|
|||
|
RECS80EXT_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
|
|||
|
RECS80EXT_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
|
|||
|
RECS80EXT_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
|
|||
|
RECS80EXT_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
|
|||
|
RECS80EXT_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
|
|||
|
RECS80EXT_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
RECS80EXT_ADDRESS_OFFSET + RECS80EXT_ADDRESS_LEN, // address_end: end of address
|
|||
|
RECS80EXT_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
RECS80EXT_COMMAND_OFFSET + RECS80EXT_COMMAND_LEN, // command_end: end of command
|
|||
|
RECS80EXT_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
RECS80EXT_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
RECS80EXT_LSB, // lsb_first: flag: LSB first
|
|||
|
RECS80EXT_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_NUBERT_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER nubert_param =
|
|||
|
{
|
|||
|
IRMP_NUBERT_PROTOCOL, // protocol: ir protocol
|
|||
|
NUBERT_1_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
|
|||
|
NUBERT_1_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
|
|||
|
NUBERT_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
|
|||
|
NUBERT_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
|
|||
|
NUBERT_0_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
|
|||
|
NUBERT_0_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
|
|||
|
NUBERT_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
|
|||
|
NUBERT_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
|
|||
|
NUBERT_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
NUBERT_ADDRESS_OFFSET + NUBERT_ADDRESS_LEN, // address_end: end of address
|
|||
|
NUBERT_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
NUBERT_COMMAND_OFFSET + NUBERT_COMMAND_LEN, // command_end: end of command
|
|||
|
NUBERT_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
NUBERT_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
NUBERT_LSB, // lsb_first: flag: LSB first
|
|||
|
NUBERT_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_FAN_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER fan_param =
|
|||
|
{
|
|||
|
IRMP_FAN_PROTOCOL, // protocol: ir protocol
|
|||
|
FAN_1_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
|
|||
|
FAN_1_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
|
|||
|
FAN_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
|
|||
|
FAN_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
|
|||
|
FAN_0_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
|
|||
|
FAN_0_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
|
|||
|
FAN_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
|
|||
|
FAN_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
|
|||
|
FAN_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
FAN_ADDRESS_OFFSET + FAN_ADDRESS_LEN, // address_end: end of address
|
|||
|
FAN_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
FAN_COMMAND_OFFSET + FAN_COMMAND_LEN, // command_end: end of command
|
|||
|
FAN_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
FAN_STOP_BIT, // stop_bit: flag: frame has NO stop bit
|
|||
|
FAN_LSB, // lsb_first: flag: LSB first
|
|||
|
FAN_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_SPEAKER_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER speaker_param =
|
|||
|
{
|
|||
|
IRMP_SPEAKER_PROTOCOL, // protocol: ir protocol
|
|||
|
SPEAKER_1_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
|
|||
|
SPEAKER_1_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
|
|||
|
SPEAKER_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
|
|||
|
SPEAKER_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
|
|||
|
SPEAKER_0_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
|
|||
|
SPEAKER_0_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
|
|||
|
SPEAKER_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
|
|||
|
SPEAKER_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
|
|||
|
SPEAKER_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
SPEAKER_ADDRESS_OFFSET + SPEAKER_ADDRESS_LEN, // address_end: end of address
|
|||
|
SPEAKER_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
SPEAKER_COMMAND_OFFSET + SPEAKER_COMMAND_LEN, // command_end: end of command
|
|||
|
SPEAKER_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
SPEAKER_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
SPEAKER_LSB, // lsb_first: flag: LSB first
|
|||
|
SPEAKER_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER bang_olufsen_param =
|
|||
|
{
|
|||
|
IRMP_BANG_OLUFSEN_PROTOCOL, // protocol: ir protocol
|
|||
|
BANG_OLUFSEN_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
|
|||
|
BANG_OLUFSEN_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
|
|||
|
BANG_OLUFSEN_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
|
|||
|
BANG_OLUFSEN_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
|
|||
|
BANG_OLUFSEN_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
|
|||
|
BANG_OLUFSEN_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
|
|||
|
BANG_OLUFSEN_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
|
|||
|
BANG_OLUFSEN_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
|
|||
|
BANG_OLUFSEN_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
BANG_OLUFSEN_ADDRESS_OFFSET + BANG_OLUFSEN_ADDRESS_LEN, // address_end: end of address
|
|||
|
BANG_OLUFSEN_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
BANG_OLUFSEN_COMMAND_OFFSET + BANG_OLUFSEN_COMMAND_LEN, // command_end: end of command
|
|||
|
BANG_OLUFSEN_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
BANG_OLUFSEN_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
BANG_OLUFSEN_LSB, // lsb_first: flag: LSB first
|
|||
|
BANG_OLUFSEN_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_GRUNDIG_NOKIA_IR60_PROTOCOL == 1
|
|||
|
|
|||
|
static uint_fast8_t first_bit;
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER grundig_param =
|
|||
|
{
|
|||
|
IRMP_GRUNDIG_PROTOCOL, // protocol: ir protocol
|
|||
|
|
|||
|
GRUNDIG_NOKIA_IR60_BIT_LEN_MIN, // pulse_1_len_min: here: minimum length of short pulse
|
|||
|
GRUNDIG_NOKIA_IR60_BIT_LEN_MAX, // pulse_1_len_max: here: maximum length of short pulse
|
|||
|
GRUNDIG_NOKIA_IR60_BIT_LEN_MIN, // pause_1_len_min: here: minimum length of short pause
|
|||
|
GRUNDIG_NOKIA_IR60_BIT_LEN_MAX, // pause_1_len_max: here: maximum length of short pause
|
|||
|
0, // pulse_0_len_min: here: not used
|
|||
|
0, // pulse_0_len_max: here: not used
|
|||
|
0, // pause_0_len_min: here: not used
|
|||
|
0, // pause_0_len_max: here: not used
|
|||
|
GRUNDIG_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
GRUNDIG_ADDRESS_OFFSET + GRUNDIG_ADDRESS_LEN, // address_end: end of address
|
|||
|
GRUNDIG_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
GRUNDIG_COMMAND_OFFSET + GRUNDIG_COMMAND_LEN + 1, // command_end: end of command (USE 1 bit MORE to STORE NOKIA DATA!)
|
|||
|
NOKIA_COMPLETE_DATA_LEN, // complete_len: complete length of frame, here: NOKIA instead of GRUNDIG!
|
|||
|
GRUNDIG_NOKIA_IR60_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
GRUNDIG_NOKIA_IR60_LSB, // lsb_first: flag: LSB first
|
|||
|
GRUNDIG_NOKIA_IR60_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_SIEMENS_OR_RUWIDO_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER ruwido_param =
|
|||
|
{
|
|||
|
IRMP_RUWIDO_PROTOCOL, // protocol: ir protocol
|
|||
|
SIEMENS_OR_RUWIDO_BIT_PULSE_LEN_MIN, // pulse_1_len_min: here: minimum length of short pulse
|
|||
|
SIEMENS_OR_RUWIDO_BIT_PULSE_LEN_MAX, // pulse_1_len_max: here: maximum length of short pulse
|
|||
|
SIEMENS_OR_RUWIDO_BIT_PAUSE_LEN_MIN, // pause_1_len_min: here: minimum length of short pause
|
|||
|
SIEMENS_OR_RUWIDO_BIT_PAUSE_LEN_MAX, // pause_1_len_max: here: maximum length of short pause
|
|||
|
0, // pulse_0_len_min: here: not used
|
|||
|
0, // pulse_0_len_max: here: not used
|
|||
|
0, // pause_0_len_min: here: not used
|
|||
|
0, // pause_0_len_max: here: not used
|
|||
|
RUWIDO_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
RUWIDO_ADDRESS_OFFSET + RUWIDO_ADDRESS_LEN, // address_end: end of address
|
|||
|
RUWIDO_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
RUWIDO_COMMAND_OFFSET + RUWIDO_COMMAND_LEN, // command_end: end of command
|
|||
|
SIEMENS_COMPLETE_DATA_LEN, // complete_len: complete length of frame, here: SIEMENS instead of RUWIDO!
|
|||
|
SIEMENS_OR_RUWIDO_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
SIEMENS_OR_RUWIDO_LSB, // lsb_first: flag: LSB first
|
|||
|
SIEMENS_OR_RUWIDO_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_FDC_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER fdc_param =
|
|||
|
{
|
|||
|
IRMP_FDC_PROTOCOL, // protocol: ir protocol
|
|||
|
FDC_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
|
|||
|
FDC_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
|
|||
|
FDC_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
|
|||
|
FDC_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
|
|||
|
FDC_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
|
|||
|
FDC_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
|
|||
|
FDC_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
|
|||
|
FDC_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
|
|||
|
FDC_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
FDC_ADDRESS_OFFSET + FDC_ADDRESS_LEN, // address_end: end of address
|
|||
|
FDC_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
FDC_COMMAND_OFFSET + FDC_COMMAND_LEN, // command_end: end of command
|
|||
|
FDC_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
FDC_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
FDC_LSB, // lsb_first: flag: LSB first
|
|||
|
FDC_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_RCCAR_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER rccar_param =
|
|||
|
{
|
|||
|
IRMP_RCCAR_PROTOCOL, // protocol: ir protocol
|
|||
|
RCCAR_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
|
|||
|
RCCAR_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
|
|||
|
RCCAR_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
|
|||
|
RCCAR_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
|
|||
|
RCCAR_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
|
|||
|
RCCAR_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
|
|||
|
RCCAR_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
|
|||
|
RCCAR_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
|
|||
|
RCCAR_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
RCCAR_ADDRESS_OFFSET + RCCAR_ADDRESS_LEN, // address_end: end of address
|
|||
|
RCCAR_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
RCCAR_COMMAND_OFFSET + RCCAR_COMMAND_LEN, // command_end: end of command
|
|||
|
RCCAR_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
RCCAR_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
RCCAR_LSB, // lsb_first: flag: LSB first
|
|||
|
RCCAR_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_NIKON_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER nikon_param =
|
|||
|
{
|
|||
|
IRMP_NIKON_PROTOCOL, // protocol: ir protocol
|
|||
|
NIKON_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
|
|||
|
NIKON_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
|
|||
|
NIKON_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
|
|||
|
NIKON_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
|
|||
|
NIKON_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
|
|||
|
NIKON_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
|
|||
|
NIKON_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
|
|||
|
NIKON_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
|
|||
|
NIKON_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
NIKON_ADDRESS_OFFSET + NIKON_ADDRESS_LEN, // address_end: end of address
|
|||
|
NIKON_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
NIKON_COMMAND_OFFSET + NIKON_COMMAND_LEN, // command_end: end of command
|
|||
|
NIKON_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
NIKON_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
NIKON_LSB, // lsb_first: flag: LSB first
|
|||
|
NIKON_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_KATHREIN_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER kathrein_param =
|
|||
|
{
|
|||
|
IRMP_KATHREIN_PROTOCOL, // protocol: ir protocol
|
|||
|
KATHREIN_1_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
|
|||
|
KATHREIN_1_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
|
|||
|
KATHREIN_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
|
|||
|
KATHREIN_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
|
|||
|
KATHREIN_0_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
|
|||
|
KATHREIN_0_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
|
|||
|
KATHREIN_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
|
|||
|
KATHREIN_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
|
|||
|
KATHREIN_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
KATHREIN_ADDRESS_OFFSET + KATHREIN_ADDRESS_LEN, // address_end: end of address
|
|||
|
KATHREIN_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
KATHREIN_COMMAND_OFFSET + KATHREIN_COMMAND_LEN, // command_end: end of command
|
|||
|
KATHREIN_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
KATHREIN_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
KATHREIN_LSB, // lsb_first: flag: LSB first
|
|||
|
KATHREIN_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_NETBOX_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER netbox_param =
|
|||
|
{
|
|||
|
IRMP_NETBOX_PROTOCOL, // protocol: ir protocol
|
|||
|
NETBOX_PULSE_LEN, // pulse_1_len_min: minimum length of pulse with bit value 1, here: exact value
|
|||
|
NETBOX_PULSE_REST_LEN, // pulse_1_len_max: maximum length of pulse with bit value 1, here: rest value
|
|||
|
NETBOX_PAUSE_LEN, // pause_1_len_min: minimum length of pause with bit value 1, here: exact value
|
|||
|
NETBOX_PAUSE_REST_LEN, // pause_1_len_max: maximum length of pause with bit value 1, here: rest value
|
|||
|
NETBOX_PULSE_LEN, // pulse_0_len_min: minimum length of pulse with bit value 0, here: exact value
|
|||
|
NETBOX_PULSE_REST_LEN, // pulse_0_len_max: maximum length of pulse with bit value 0, here: rest value
|
|||
|
NETBOX_PAUSE_LEN, // pause_0_len_min: minimum length of pause with bit value 0, here: exact value
|
|||
|
NETBOX_PAUSE_REST_LEN, // pause_0_len_max: maximum length of pause with bit value 0, here: rest value
|
|||
|
NETBOX_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
NETBOX_ADDRESS_OFFSET + NETBOX_ADDRESS_LEN, // address_end: end of address
|
|||
|
NETBOX_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
NETBOX_COMMAND_OFFSET + NETBOX_COMMAND_LEN, // command_end: end of command
|
|||
|
NETBOX_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
NETBOX_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
NETBOX_LSB, // lsb_first: flag: LSB first
|
|||
|
NETBOX_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_LEGO_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER lego_param =
|
|||
|
{
|
|||
|
IRMP_LEGO_PROTOCOL, // protocol: ir protocol
|
|||
|
LEGO_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
|
|||
|
LEGO_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
|
|||
|
LEGO_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
|
|||
|
LEGO_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
|
|||
|
LEGO_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
|
|||
|
LEGO_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
|
|||
|
LEGO_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
|
|||
|
LEGO_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
|
|||
|
LEGO_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
LEGO_ADDRESS_OFFSET + LEGO_ADDRESS_LEN, // address_end: end of address
|
|||
|
LEGO_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
LEGO_COMMAND_OFFSET + LEGO_COMMAND_LEN, // command_end: end of command
|
|||
|
LEGO_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
LEGO_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
LEGO_LSB, // lsb_first: flag: LSB first
|
|||
|
LEGO_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_THOMSON_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER thomson_param =
|
|||
|
{
|
|||
|
IRMP_THOMSON_PROTOCOL, // protocol: ir protocol
|
|||
|
THOMSON_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
|
|||
|
THOMSON_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
|
|||
|
THOMSON_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
|
|||
|
THOMSON_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
|
|||
|
THOMSON_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
|
|||
|
THOMSON_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
|
|||
|
THOMSON_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
|
|||
|
THOMSON_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
|
|||
|
THOMSON_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
THOMSON_ADDRESS_OFFSET + THOMSON_ADDRESS_LEN, // address_end: end of address
|
|||
|
THOMSON_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
THOMSON_COMMAND_OFFSET + THOMSON_COMMAND_LEN, // command_end: end of command
|
|||
|
THOMSON_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
THOMSON_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
THOMSON_LSB, // lsb_first: flag: LSB first
|
|||
|
THOMSON_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_BOSE_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER bose_param =
|
|||
|
{
|
|||
|
IRMP_BOSE_PROTOCOL, // protocol: ir protocol
|
|||
|
BOSE_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
|
|||
|
BOSE_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
|
|||
|
BOSE_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
|
|||
|
BOSE_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
|
|||
|
BOSE_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
|
|||
|
BOSE_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
|
|||
|
BOSE_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
|
|||
|
BOSE_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
|
|||
|
BOSE_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
BOSE_ADDRESS_OFFSET + BOSE_ADDRESS_LEN, // address_end: end of address
|
|||
|
BOSE_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
BOSE_COMMAND_OFFSET + BOSE_COMMAND_LEN, // command_end: end of command
|
|||
|
BOSE_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
BOSE_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
BOSE_LSB, // lsb_first: flag: LSB first
|
|||
|
BOSE_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_A1TVBOX_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER a1tvbox_param =
|
|||
|
{
|
|||
|
IRMP_A1TVBOX_PROTOCOL, // protocol: ir protocol
|
|||
|
|
|||
|
A1TVBOX_BIT_PULSE_LEN_MIN, // pulse_1_len_min: here: minimum length of short pulse
|
|||
|
A1TVBOX_BIT_PULSE_LEN_MAX, // pulse_1_len_max: here: maximum length of short pulse
|
|||
|
A1TVBOX_BIT_PAUSE_LEN_MIN, // pause_1_len_min: here: minimum length of short pause
|
|||
|
A1TVBOX_BIT_PAUSE_LEN_MAX, // pause_1_len_max: here: maximum length of short pause
|
|||
|
0, // pulse_0_len_min: here: not used
|
|||
|
0, // pulse_0_len_max: here: not used
|
|||
|
0, // pause_0_len_min: here: not used
|
|||
|
0, // pause_0_len_max: here: not used
|
|||
|
A1TVBOX_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
A1TVBOX_ADDRESS_OFFSET + A1TVBOX_ADDRESS_LEN, // address_end: end of address
|
|||
|
A1TVBOX_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
A1TVBOX_COMMAND_OFFSET + A1TVBOX_COMMAND_LEN, // command_end: end of command
|
|||
|
A1TVBOX_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
A1TVBOX_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
A1TVBOX_LSB, // lsb_first: flag: LSB first
|
|||
|
A1TVBOX_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_MERLIN_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER merlin_param =
|
|||
|
{
|
|||
|
IRMP_MERLIN_PROTOCOL, // protocol: ir protocol
|
|||
|
|
|||
|
MERLIN_BIT_PULSE_LEN_MIN, // pulse_1_len_min: here: minimum length of short pulse
|
|||
|
MERLIN_BIT_PULSE_LEN_MAX, // pulse_1_len_max: here: maximum length of short pulse
|
|||
|
MERLIN_BIT_PAUSE_LEN_MIN, // pause_1_len_min: here: minimum length of short pause
|
|||
|
MERLIN_BIT_PAUSE_LEN_MAX, // pause_1_len_max: here: maximum length of short pause
|
|||
|
0, // pulse_0_len_min: here: not used
|
|||
|
0, // pulse_0_len_max: here: not used
|
|||
|
0, // pause_0_len_min: here: not used
|
|||
|
0, // pause_0_len_max: here: not used
|
|||
|
MERLIN_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
MERLIN_ADDRESS_OFFSET + MERLIN_ADDRESS_LEN, // address_end: end of address
|
|||
|
MERLIN_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
MERLIN_COMMAND_OFFSET + MERLIN_COMMAND_LEN, // command_end: end of command
|
|||
|
MERLIN_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
MERLIN_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
MERLIN_LSB, // lsb_first: flag: LSB first
|
|||
|
MERLIN_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_ORTEK_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER ortek_param =
|
|||
|
{
|
|||
|
IRMP_ORTEK_PROTOCOL, // protocol: ir protocol
|
|||
|
|
|||
|
ORTEK_BIT_PULSE_LEN_MIN, // pulse_1_len_min: here: minimum length of short pulse
|
|||
|
ORTEK_BIT_PULSE_LEN_MAX, // pulse_1_len_max: here: maximum length of short pulse
|
|||
|
ORTEK_BIT_PAUSE_LEN_MIN, // pause_1_len_min: here: minimum length of short pause
|
|||
|
ORTEK_BIT_PAUSE_LEN_MAX, // pause_1_len_max: here: maximum length of short pause
|
|||
|
0, // pulse_0_len_min: here: not used
|
|||
|
0, // pulse_0_len_max: here: not used
|
|||
|
0, // pause_0_len_min: here: not used
|
|||
|
0, // pause_0_len_max: here: not used
|
|||
|
ORTEK_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
ORTEK_ADDRESS_OFFSET + ORTEK_ADDRESS_LEN, // address_end: end of address
|
|||
|
ORTEK_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
ORTEK_COMMAND_OFFSET + ORTEK_COMMAND_LEN, // command_end: end of command
|
|||
|
ORTEK_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
ORTEK_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
ORTEK_LSB, // lsb_first: flag: LSB first
|
|||
|
ORTEK_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_ROOMBA_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER roomba_param =
|
|||
|
{
|
|||
|
IRMP_ROOMBA_PROTOCOL, // protocol: ir protocol
|
|||
|
ROOMBA_1_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
|
|||
|
ROOMBA_1_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
|
|||
|
ROOMBA_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
|
|||
|
ROOMBA_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
|
|||
|
ROOMBA_0_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
|
|||
|
ROOMBA_0_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
|
|||
|
ROOMBA_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
|
|||
|
ROOMBA_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
|
|||
|
ROOMBA_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
ROOMBA_ADDRESS_OFFSET + ROOMBA_ADDRESS_LEN, // address_end: end of address
|
|||
|
ROOMBA_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
ROOMBA_COMMAND_OFFSET + ROOMBA_COMMAND_LEN, // command_end: end of command
|
|||
|
ROOMBA_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
ROOMBA_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
ROOMBA_LSB, // lsb_first: flag: LSB first
|
|||
|
ROOMBA_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_RCMM_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER rcmm_param =
|
|||
|
{
|
|||
|
IRMP_RCMM32_PROTOCOL, // protocol: ir protocol
|
|||
|
|
|||
|
RCMM32_BIT_PULSE_LEN_MIN, // pulse_1_len_min: here: minimum length of short pulse
|
|||
|
RCMM32_BIT_PULSE_LEN_MAX, // pulse_1_len_max: here: maximum length of short pulse
|
|||
|
0, // pause_1_len_min: here: minimum length of short pause
|
|||
|
0, // pause_1_len_max: here: maximum length of short pause
|
|||
|
RCMM32_BIT_PULSE_LEN_MIN, // pulse_0_len_min: here: not used
|
|||
|
RCMM32_BIT_PULSE_LEN_MAX, // pulse_0_len_max: here: not used
|
|||
|
0, // pause_0_len_min: here: not used
|
|||
|
0, // pause_0_len_max: here: not used
|
|||
|
RCMM32_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
RCMM32_ADDRESS_OFFSET + RCMM32_ADDRESS_LEN, // address_end: end of address
|
|||
|
RCMM32_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
RCMM32_COMMAND_OFFSET + RCMM32_COMMAND_LEN, // command_end: end of command
|
|||
|
RCMM32_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
RCMM32_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
RCMM32_LSB, // lsb_first: flag: LSB first
|
|||
|
RCMM32_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_PENTAX_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER pentax_param =
|
|||
|
{
|
|||
|
IRMP_PENTAX_PROTOCOL, // protocol: ir protocol
|
|||
|
PENTAX_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
|
|||
|
PENTAX_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
|
|||
|
PENTAX_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
|
|||
|
PENTAX_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
|
|||
|
PENTAX_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
|
|||
|
PENTAX_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
|
|||
|
PENTAX_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
|
|||
|
PENTAX_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
|
|||
|
PENTAX_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
PENTAX_ADDRESS_OFFSET + PENTAX_ADDRESS_LEN, // address_end: end of address
|
|||
|
PENTAX_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
PENTAX_COMMAND_OFFSET + PENTAX_COMMAND_LEN, // command_end: end of command
|
|||
|
PENTAX_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
PENTAX_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
PENTAX_LSB, // lsb_first: flag: LSB first
|
|||
|
PENTAX_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_ACP24_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER acp24_param =
|
|||
|
{
|
|||
|
IRMP_ACP24_PROTOCOL, // protocol: ir protocol
|
|||
|
ACP24_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
|
|||
|
ACP24_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
|
|||
|
ACP24_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
|
|||
|
ACP24_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
|
|||
|
ACP24_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
|
|||
|
ACP24_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
|
|||
|
ACP24_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
|
|||
|
ACP24_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
|
|||
|
ACP24_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
ACP24_ADDRESS_OFFSET + ACP24_ADDRESS_LEN, // address_end: end of address
|
|||
|
ACP24_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
ACP24_COMMAND_OFFSET + ACP24_COMMAND_LEN, // command_end: end of command
|
|||
|
ACP24_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
ACP24_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
ACP24_LSB, // lsb_first: flag: LSB first
|
|||
|
ACP24_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_RADIO1_PROTOCOL == 1
|
|||
|
|
|||
|
static const PROGMEM IRMP_PARAMETER radio1_param =
|
|||
|
{
|
|||
|
IRMP_RADIO1_PROTOCOL, // protocol: ir protocol
|
|||
|
|
|||
|
RADIO1_1_PULSE_LEN_MIN, // pulse_1_len_min: minimum length of pulse with bit value 1
|
|||
|
RADIO1_1_PULSE_LEN_MAX, // pulse_1_len_max: maximum length of pulse with bit value 1
|
|||
|
RADIO1_1_PAUSE_LEN_MIN, // pause_1_len_min: minimum length of pause with bit value 1
|
|||
|
RADIO1_1_PAUSE_LEN_MAX, // pause_1_len_max: maximum length of pause with bit value 1
|
|||
|
RADIO1_0_PULSE_LEN_MIN, // pulse_0_len_min: minimum length of pulse with bit value 0
|
|||
|
RADIO1_0_PULSE_LEN_MAX, // pulse_0_len_max: maximum length of pulse with bit value 0
|
|||
|
RADIO1_0_PAUSE_LEN_MIN, // pause_0_len_min: minimum length of pause with bit value 0
|
|||
|
RADIO1_0_PAUSE_LEN_MAX, // pause_0_len_max: maximum length of pause with bit value 0
|
|||
|
RADIO1_ADDRESS_OFFSET, // address_offset: address offset
|
|||
|
RADIO1_ADDRESS_OFFSET + RADIO1_ADDRESS_LEN, // address_end: end of address
|
|||
|
RADIO1_COMMAND_OFFSET, // command_offset: command offset
|
|||
|
RADIO1_COMMAND_OFFSET + RADIO1_COMMAND_LEN, // command_end: end of command
|
|||
|
RADIO1_COMPLETE_DATA_LEN, // complete_len: complete length of frame
|
|||
|
RADIO1_STOP_BIT, // stop_bit: flag: frame has stop bit
|
|||
|
RADIO1_LSB, // lsb_first: flag: LSB first
|
|||
|
RADIO1_FLAGS // flags: some flags
|
|||
|
};
|
|||
|
|
|||
|
#endif
|
|||
|
|
|||
|
static uint_fast8_t irmp_bit; // current bit position
|
|||
|
static IRMP_PARAMETER irmp_param;
|
|||
|
|
|||
|
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1)
|
|||
|
static IRMP_PARAMETER irmp_param2;
|
|||
|
#endif
|
|||
|
|
|||
|
static volatile uint_fast8_t irmp_ir_detected = FALSE;
|
|||
|
static volatile uint_fast8_t irmp_protocol;
|
|||
|
static volatile uint_fast16_t irmp_address;
|
|||
|
static volatile uint_fast16_t irmp_command;
|
|||
|
static volatile uint_fast16_t irmp_id; // only used for SAMSUNG protocol
|
|||
|
static volatile uint_fast8_t irmp_flags;
|
|||
|
// static volatile uint_fast8_t irmp_busy_flag;
|
|||
|
|
|||
|
#if defined(__MBED__)
|
|||
|
// DigitalIn inputPin(IRMP_PIN, PullUp); // this requires mbed.h and source to be compiled as cpp
|
|||
|
gpio_t gpioIRin; // use low level c function instead
|
|||
|
#endif
|
|||
|
|
|||
|
|
|||
|
#ifdef ANALYZE
|
|||
|
#define input(x) (x)
|
|||
|
static uint_fast8_t IRMP_PIN;
|
|||
|
static uint_fast8_t radio;
|
|||
|
#endif
|
|||
|
|
|||
|
/*---------------------------------------------------------------------------------------------------------------------------------------------------
|
|||
|
* Initialize IRMP decoder
|
|||
|
* @details Configures IRMP input pin
|
|||
|
*---------------------------------------------------------------------------------------------------------------------------------------------------
|
|||
|
*/
|
|||
|
#ifndef ANALYZE
|
|||
|
void
|
|||
|
irmp_init (void)
|
|||
|
{
|
|||
|
#if defined(PIC_CCS) || defined(PIC_C18) // PIC: do nothing
|
|||
|
#elif defined (ARM_STM32) // STM32
|
|||
|
GPIO_InitTypeDef GPIO_InitStructure;
|
|||
|
|
|||
|
/* GPIOx clock enable */
|
|||
|
# if defined (ARM_STM32L1XX)
|
|||
|
RCC_AHBPeriphClockCmd(IRMP_PORT_RCC, ENABLE);
|
|||
|
# elif defined (ARM_STM32F10X)
|
|||
|
RCC_APB2PeriphClockCmd(IRMP_PORT_RCC, ENABLE);
|
|||
|
# elif defined (ARM_STM32F4XX)
|
|||
|
RCC_AHB1PeriphClockCmd(IRMP_PORT_RCC, ENABLE);
|
|||
|
# endif
|
|||
|
|
|||
|
/* GPIO Configuration */
|
|||
|
GPIO_InitStructure.GPIO_Pin = IRMP_BIT;
|
|||
|
# if defined (ARM_STM32L1XX) || defined (ARM_STM32F4XX)
|
|||
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
|
|||
|
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
|
|||
|
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
|
|||
|
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
|
|||
|
# elif defined (ARM_STM32F10X)
|
|||
|
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz;
|
|||
|
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
|
|||
|
# endif
|
|||
|
GPIO_Init(IRMP_PORT, &GPIO_InitStructure);
|
|||
|
|
|||
|
#elif defined(STELLARIS_ARM_CORTEX_M4)
|
|||
|
// Enable the GPIO port
|
|||
|
ROM_SysCtlPeripheralEnable(IRMP_PORT_PERIPH);
|
|||
|
|
|||
|
// Set as an input
|
|||
|
ROM_GPIODirModeSet(IRMP_PORT_BASE, IRMP_PORT_PIN, GPIO_DIR_MODE_IN);
|
|||
|
ROM_GPIOPadConfigSet(IRMP_PORT_BASE, IRMP_PORT_PIN, GPIO_STRENGTH_2MA, GPIO_PIN_TYPE_STD_WPU);
|
|||
|
|
|||
|
#elif defined(__SDCC_stm8) // STM8
|
|||
|
IRMP_GPIO_STRUCT->DDR &= ~(1<<IRMP_BIT); // pin is input
|
|||
|
IRMP_GPIO_STRUCT->CR1 |= (1<<IRMP_BIT); // activate pullup
|
|||
|
|
|||
|
#elif defined (TEENSY_ARM_CORTEX_M4) // TEENSY
|
|||
|
pinMode(IRMP_PIN, INPUT);
|
|||
|
|
|||
|
#elif defined(__xtensa__) // ESP8266
|
|||
|
gpio_enable(IRMP_BIT_NUMBER, GPIO_INPUT);
|
|||
|
/*
|
|||
|
// select pin function
|
|||
|
# if (IRMP_BIT_NUMBER == 12)
|
|||
|
PIN_FUNC_SELECT(PERIPHS_IO_MUX_MTDI_U, FUNC_GPIO12);
|
|||
|
// doesn't work for me:
|
|||
|
// # elif (IRMP_BIT_NUMBER == 13)
|
|||
|
// PIN_FUNC_SELECT(PERIPHS_IO_MUX_MTCK_U , FUNC_GPIO13);
|
|||
|
# else
|
|||
|
# warning Please add PIN_FUNC_SELECT when necessary.
|
|||
|
# endif
|
|||
|
GPIO_DIS_OUTPUT(IRMP_BIT_NUMBER);
|
|||
|
*/
|
|||
|
|
|||
|
#elif defined(__MBED__)
|
|||
|
gpio_init_in_ex(&gpioIRin, IRMP_PIN, IRMP_PINMODE); // initialize input for IR diode
|
|||
|
|
|||
|
#else // AVR
|
|||
|
IRMP_PORT &= ~(1<<IRMP_BIT); // deactivate pullup
|
|||
|
IRMP_DDR &= ~(1<<IRMP_BIT); // set pin to input
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_LOGGING == 1
|
|||
|
irmp_uart_init ();
|
|||
|
#endif
|
|||
|
}
|
|||
|
#endif
|
|||
|
/*---------------------------------------------------------------------------------------------------------------------------------------------------
|
|||
|
* Get IRMP data
|
|||
|
* @details gets decoded IRMP data
|
|||
|
* @param pointer in order to store IRMP data
|
|||
|
* @return TRUE: successful, FALSE: failed
|
|||
|
*---------------------------------------------------------------------------------------------------------------------------------------------------
|
|||
|
*/
|
|||
|
uint_fast8_t
|
|||
|
irmp_get_data (IRMP_DATA * irmp_data_p)
|
|||
|
{
|
|||
|
uint_fast8_t rtc = FALSE;
|
|||
|
|
|||
|
if (irmp_ir_detected)
|
|||
|
{
|
|||
|
switch (irmp_protocol)
|
|||
|
{
|
|||
|
#if IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1
|
|||
|
case IRMP_SAMSUNG_PROTOCOL:
|
|||
|
if ((irmp_command >> 8) == (~irmp_command & 0x00FF))
|
|||
|
{
|
|||
|
irmp_command &= 0xff;
|
|||
|
irmp_command |= irmp_id << 8;
|
|||
|
rtc = TRUE;
|
|||
|
}
|
|||
|
break;
|
|||
|
|
|||
|
#if IRMP_SUPPORT_SAMSUNG48_PROTOCOL == 1
|
|||
|
case IRMP_SAMSUNG48_PROTOCOL:
|
|||
|
irmp_command = (irmp_command & 0x00FF) | ((irmp_id & 0x00FF) << 8);
|
|||
|
rtc = TRUE;
|
|||
|
break;
|
|||
|
#endif
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_NEC_PROTOCOL == 1
|
|||
|
case IRMP_NEC_PROTOCOL:
|
|||
|
if ((irmp_command >> 8) == (~irmp_command & 0x00FF))
|
|||
|
{
|
|||
|
irmp_command &= 0xff;
|
|||
|
rtc = TRUE;
|
|||
|
}
|
|||
|
else if (irmp_address == 0x87EE)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("Switching to APPLE protocol\n");
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_protocol = IRMP_APPLE_PROTOCOL;
|
|||
|
irmp_address = (irmp_command & 0xFF00) >> 8;
|
|||
|
irmp_command &= 0x00FF;
|
|||
|
rtc = TRUE;
|
|||
|
}
|
|||
|
break;
|
|||
|
#endif
|
|||
|
|
|||
|
|
|||
|
#if IRMP_SUPPORT_NEC_PROTOCOL == 1
|
|||
|
case IRMP_VINCENT_PROTOCOL:
|
|||
|
if ((irmp_command >> 8) == (irmp_command & 0x00FF))
|
|||
|
{
|
|||
|
irmp_command &= 0xff;
|
|||
|
rtc = TRUE;
|
|||
|
}
|
|||
|
break;
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_BOSE_PROTOCOL == 1
|
|||
|
case IRMP_BOSE_PROTOCOL:
|
|||
|
if ((irmp_command >> 8) == (~irmp_command & 0x00FF))
|
|||
|
{
|
|||
|
irmp_command &= 0xff;
|
|||
|
rtc = TRUE;
|
|||
|
}
|
|||
|
break;
|
|||
|
#endif
|
|||
|
#if IRMP_SUPPORT_SIEMENS_OR_RUWIDO_PROTOCOL == 1
|
|||
|
case IRMP_SIEMENS_PROTOCOL:
|
|||
|
case IRMP_RUWIDO_PROTOCOL:
|
|||
|
if (((irmp_command >> 1) & 0x0001) == (~irmp_command & 0x0001))
|
|||
|
{
|
|||
|
irmp_command >>= 1;
|
|||
|
rtc = TRUE;
|
|||
|
}
|
|||
|
break;
|
|||
|
#endif
|
|||
|
#if IRMP_SUPPORT_KATHREIN_PROTOCOL == 1
|
|||
|
case IRMP_KATHREIN_PROTOCOL:
|
|||
|
if (irmp_command != 0x0000)
|
|||
|
{
|
|||
|
rtc = TRUE;
|
|||
|
}
|
|||
|
break;
|
|||
|
#endif
|
|||
|
#if IRMP_SUPPORT_RC5_PROTOCOL == 1
|
|||
|
case IRMP_RC5_PROTOCOL:
|
|||
|
irmp_address &= ~0x20; // clear toggle bit
|
|||
|
rtc = TRUE;
|
|||
|
break;
|
|||
|
#endif
|
|||
|
#if IRMP_SUPPORT_S100_PROTOCOL == 1
|
|||
|
case IRMP_S100_PROTOCOL:
|
|||
|
irmp_address &= ~0x20; // clear toggle bit
|
|||
|
rtc = TRUE;
|
|||
|
break;
|
|||
|
#endif
|
|||
|
#if IRMP_SUPPORT_IR60_PROTOCOL == 1
|
|||
|
case IRMP_IR60_PROTOCOL:
|
|||
|
if (irmp_command != 0x007d) // 0x007d (== 62<<1 + 1) is start instruction frame
|
|||
|
{
|
|||
|
rtc = TRUE;
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF("Info IR60: got start instruction frame\n");
|
|||
|
#endif // ANALYZE
|
|||
|
}
|
|||
|
break;
|
|||
|
#endif
|
|||
|
#if IRMP_SUPPORT_RCCAR_PROTOCOL == 1
|
|||
|
case IRMP_RCCAR_PROTOCOL:
|
|||
|
// frame in irmp_data:
|
|||
|
// Bit 12 11 10 9 8 7 6 5 4 3 2 1 0
|
|||
|
// V D7 D6 D5 D4 D3 D2 D1 D0 A1 A0 C1 C0 // 10 9 8 7 6 5 4 3 2 1 0
|
|||
|
irmp_address = (irmp_command & 0x000C) >> 2; // addr: 0 0 0 0 0 0 0 0 0 A1 A0
|
|||
|
irmp_command = ((irmp_command & 0x1000) >> 2) | // V-Bit: V 0 0 0 0 0 0 0 0 0 0
|
|||
|
((irmp_command & 0x0003) << 8) | // C-Bits: 0 C1 C0 0 0 0 0 0 0 0 0
|
|||
|
((irmp_command & 0x0FF0) >> 4); // D-Bits: D7 D6 D5 D4 D3 D2 D1 D0
|
|||
|
rtc = TRUE; // Summe: V C1 C0 D7 D6 D5 D4 D3 D2 D1 D0
|
|||
|
break;
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_NETBOX_PROTOCOL == 1 // squeeze code to 8 bit, upper bit indicates release-key
|
|||
|
case IRMP_NETBOX_PROTOCOL:
|
|||
|
if (irmp_command & 0x1000) // last bit set?
|
|||
|
{
|
|||
|
if ((irmp_command & 0x1f) == 0x15) // key pressed: 101 01 (LSB)
|
|||
|
{
|
|||
|
irmp_command >>= 5;
|
|||
|
irmp_command &= 0x7F;
|
|||
|
rtc = TRUE;
|
|||
|
}
|
|||
|
else if ((irmp_command & 0x1f) == 0x10) // key released: 000 01 (LSB)
|
|||
|
{
|
|||
|
irmp_command >>= 5;
|
|||
|
irmp_command |= 0x80;
|
|||
|
rtc = TRUE;
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF("error NETBOX: bit6/7 must be 0/1\n");
|
|||
|
#endif // ANALYZE
|
|||
|
}
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF("error NETBOX: last bit not set\n");
|
|||
|
#endif // ANALYZE
|
|||
|
}
|
|||
|
break;
|
|||
|
#endif
|
|||
|
#if IRMP_SUPPORT_LEGO_PROTOCOL == 1
|
|||
|
case IRMP_LEGO_PROTOCOL:
|
|||
|
{
|
|||
|
uint_fast8_t crc = 0x0F ^ ((irmp_command & 0xF000) >> 12) ^ ((irmp_command & 0x0F00) >> 8) ^ ((irmp_command & 0x00F0) >> 4);
|
|||
|
|
|||
|
if ((irmp_command & 0x000F) == crc)
|
|||
|
{
|
|||
|
irmp_command >>= 4;
|
|||
|
rtc = TRUE;
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("CRC error in LEGO protocol\n");
|
|||
|
#endif // ANALYZE
|
|||
|
// rtc = TRUE; // don't accept codes with CRC errors
|
|||
|
}
|
|||
|
break;
|
|||
|
}
|
|||
|
#endif
|
|||
|
|
|||
|
default:
|
|||
|
{
|
|||
|
rtc = TRUE;
|
|||
|
break;
|
|||
|
}
|
|||
|
}
|
|||
|
|
|||
|
if (rtc)
|
|||
|
{
|
|||
|
irmp_data_p->protocol = irmp_protocol;
|
|||
|
irmp_data_p->address = irmp_address;
|
|||
|
irmp_data_p->command = irmp_command;
|
|||
|
irmp_data_p->flags = irmp_flags;
|
|||
|
irmp_command = 0;
|
|||
|
irmp_address = 0;
|
|||
|
irmp_flags = 0;
|
|||
|
}
|
|||
|
|
|||
|
irmp_ir_detected = FALSE;
|
|||
|
}
|
|||
|
|
|||
|
return rtc;
|
|||
|
}
|
|||
|
|
|||
|
#if IRMP_USE_CALLBACK == 1
|
|||
|
void
|
|||
|
irmp_set_callback_ptr (void (*cb)(uint_fast8_t))
|
|||
|
{
|
|||
|
irmp_callback_ptr = cb;
|
|||
|
}
|
|||
|
#endif // IRMP_USE_CALLBACK == 1
|
|||
|
|
|||
|
// these statics must not be volatile, because they are only used by irmp_store_bit(), which is called by irmp_ISR()
|
|||
|
static uint_fast16_t irmp_tmp_address; // ir address
|
|||
|
static uint_fast16_t irmp_tmp_command; // ir command
|
|||
|
|
|||
|
#if (IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1)) || IRMP_SUPPORT_NEC42_PROTOCOL == 1
|
|||
|
static uint_fast16_t irmp_tmp_address2; // ir address
|
|||
|
static uint_fast16_t irmp_tmp_command2; // ir command
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_LGAIR_PROTOCOL == 1
|
|||
|
static uint_fast16_t irmp_lgair_address; // ir address
|
|||
|
static uint_fast16_t irmp_lgair_command; // ir command
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1
|
|||
|
static uint_fast16_t irmp_tmp_id; // ir id (only SAMSUNG)
|
|||
|
#endif
|
|||
|
#if IRMP_SUPPORT_KASEIKYO_PROTOCOL == 1
|
|||
|
static uint8_t xor_check[6]; // check kaseikyo "parity" bits
|
|||
|
static uint_fast8_t genre2; // save genre2 bits here, later copied to MSB in flags
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_ORTEK_PROTOCOL == 1
|
|||
|
static uint_fast8_t parity; // number of '1' of the first 14 bits, check if even.
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_MITSU_HEAVY_PROTOCOL == 1
|
|||
|
static uint_fast8_t check; // number of '1' of the first 14 bits, check if even.
|
|||
|
static uint_fast8_t mitsu_parity; // number of '1' of the first 14 bits, check if even.
|
|||
|
#endif
|
|||
|
|
|||
|
/*---------------------------------------------------------------------------------------------------------------------------------------------------
|
|||
|
* store bit
|
|||
|
* @details store bit in temp address or temp command
|
|||
|
* @param value to store: 0 or 1
|
|||
|
*---------------------------------------------------------------------------------------------------------------------------------------------------
|
|||
|
*/
|
|||
|
// verhindert, dass irmp_store_bit() inline compiliert wird:
|
|||
|
// static void irmp_store_bit (uint_fast8_t) __attribute__ ((noinline));
|
|||
|
|
|||
|
static void
|
|||
|
irmp_store_bit (uint_fast8_t value)
|
|||
|
{
|
|||
|
#if IRMP_SUPPORT_ACP24_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_ACP24_PROTOCOL) // squeeze 64 bits into 16 bits:
|
|||
|
{
|
|||
|
if (value)
|
|||
|
{
|
|||
|
// ACP24-Frame:
|
|||
|
// 1 2 3 4 5 6
|
|||
|
// 0123456789012345678901234567890123456789012345678901234567890123456789
|
|||
|
// N VVMMM ? ??? t vmA x y TTTT
|
|||
|
//
|
|||
|
// irmp_data_p->command:
|
|||
|
//
|
|||
|
// 5432109876543210
|
|||
|
// NAVVvMMMmtxyTTTT
|
|||
|
|
|||
|
switch (irmp_bit)
|
|||
|
{
|
|||
|
case 0: irmp_tmp_command |= (1<<15); break; // N
|
|||
|
case 2: irmp_tmp_command |= (1<<13); break; // V
|
|||
|
case 3: irmp_tmp_command |= (1<<12); break; // V
|
|||
|
case 4: irmp_tmp_command |= (1<<10); break; // M
|
|||
|
case 5: irmp_tmp_command |= (1<< 9); break; // M
|
|||
|
case 6: irmp_tmp_command |= (1<< 8); break; // M
|
|||
|
case 20: irmp_tmp_command |= (1<< 6); break; // t
|
|||
|
case 22: irmp_tmp_command |= (1<<11); break; // v
|
|||
|
case 23: irmp_tmp_command |= (1<< 7); break; // m
|
|||
|
case 24: irmp_tmp_command |= (1<<14); break; // A
|
|||
|
case 26: irmp_tmp_command |= (1<< 5); break; // x
|
|||
|
case 44: irmp_tmp_command |= (1<< 4); break; // y
|
|||
|
case 66: irmp_tmp_command |= (1<< 3); break; // T
|
|||
|
case 67: irmp_tmp_command |= (1<< 2); break; // T
|
|||
|
case 68: irmp_tmp_command |= (1<< 1); break; // T
|
|||
|
case 69: irmp_tmp_command |= (1<< 0); break; // T
|
|||
|
}
|
|||
|
}
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_ACP24_PROTOCOL
|
|||
|
|
|||
|
#if IRMP_SUPPORT_ORTEK_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_ORTEK_PROTOCOL)
|
|||
|
{
|
|||
|
if (irmp_bit < 14)
|
|||
|
{
|
|||
|
if (value)
|
|||
|
{
|
|||
|
parity++;
|
|||
|
}
|
|||
|
}
|
|||
|
else if (irmp_bit == 14)
|
|||
|
{
|
|||
|
if (value) // value == 1: even parity
|
|||
|
{
|
|||
|
if (parity & 0x01)
|
|||
|
{
|
|||
|
parity = PARITY_CHECK_FAILED;
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
parity = PARITY_CHECK_OK;
|
|||
|
}
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
if (parity & 0x01) // value == 0: odd parity
|
|||
|
{
|
|||
|
parity = PARITY_CHECK_OK;
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
parity = PARITY_CHECK_FAILED;
|
|||
|
}
|
|||
|
}
|
|||
|
}
|
|||
|
}
|
|||
|
else
|
|||
|
#endif
|
|||
|
{
|
|||
|
;
|
|||
|
}
|
|||
|
|
|||
|
#if IRMP_SUPPORT_GRUNDIG_NOKIA_IR60_PROTOCOL == 1
|
|||
|
if (irmp_bit == 0 && irmp_param.protocol == IRMP_GRUNDIG_PROTOCOL)
|
|||
|
{
|
|||
|
first_bit = value;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif
|
|||
|
|
|||
|
if (irmp_bit >= irmp_param.address_offset && irmp_bit < irmp_param.address_end)
|
|||
|
{
|
|||
|
if (irmp_param.lsb_first)
|
|||
|
{
|
|||
|
irmp_tmp_address |= (((uint_fast16_t) (value)) << (irmp_bit - irmp_param.address_offset)); // CV wants cast
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
irmp_tmp_address <<= 1;
|
|||
|
irmp_tmp_address |= value;
|
|||
|
}
|
|||
|
}
|
|||
|
else if (irmp_bit >= irmp_param.command_offset && irmp_bit < irmp_param.command_end)
|
|||
|
{
|
|||
|
if (irmp_param.lsb_first)
|
|||
|
{
|
|||
|
#if IRMP_SUPPORT_SAMSUNG48_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_SAMSUNG48_PROTOCOL && irmp_bit >= 32)
|
|||
|
{
|
|||
|
irmp_tmp_id |= (((uint_fast16_t) (value)) << (irmp_bit - 32)); // CV wants cast
|
|||
|
}
|
|||
|
else
|
|||
|
#endif
|
|||
|
{
|
|||
|
irmp_tmp_command |= (((uint_fast16_t) (value)) << (irmp_bit - irmp_param.command_offset)); // CV wants cast
|
|||
|
}
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
irmp_tmp_command <<= 1;
|
|||
|
irmp_tmp_command |= value;
|
|||
|
}
|
|||
|
}
|
|||
|
|
|||
|
#if IRMP_SUPPORT_LGAIR_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_NEC_PROTOCOL || irmp_param.protocol == IRMP_NEC42_PROTOCOL)
|
|||
|
{
|
|||
|
if (irmp_bit < 8)
|
|||
|
{
|
|||
|
irmp_lgair_address <<= 1; // LGAIR uses MSB
|
|||
|
irmp_lgair_address |= value;
|
|||
|
}
|
|||
|
else if (irmp_bit < 24)
|
|||
|
{
|
|||
|
irmp_lgair_command <<= 1; // LGAIR uses MSB
|
|||
|
irmp_lgair_command |= value;
|
|||
|
}
|
|||
|
}
|
|||
|
// NO else!
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_NEC42_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_NEC42_PROTOCOL && irmp_bit >= 13 && irmp_bit < 26)
|
|||
|
{
|
|||
|
irmp_tmp_address2 |= (((uint_fast16_t) (value)) << (irmp_bit - 13)); // CV wants cast
|
|||
|
}
|
|||
|
else
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_SAMSUNG_PROTOCOL && irmp_bit >= SAMSUNG_ID_OFFSET && irmp_bit < SAMSUNG_ID_OFFSET + SAMSUNG_ID_LEN)
|
|||
|
{
|
|||
|
irmp_tmp_id |= (((uint_fast16_t) (value)) << (irmp_bit - SAMSUNG_ID_OFFSET)); // store with LSB first
|
|||
|
}
|
|||
|
else
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_KASEIKYO_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_KASEIKYO_PROTOCOL)
|
|||
|
{
|
|||
|
if (irmp_bit >= 20 && irmp_bit < 24)
|
|||
|
{
|
|||
|
irmp_tmp_command |= (((uint_fast16_t) (value)) << (irmp_bit - 8)); // store 4 system bits (genre 1) in upper nibble with LSB first
|
|||
|
}
|
|||
|
else if (irmp_bit >= 24 && irmp_bit < 28)
|
|||
|
{
|
|||
|
genre2 |= (((uint_fast8_t) (value)) << (irmp_bit - 20)); // store 4 system bits (genre 2) in upper nibble with LSB first
|
|||
|
}
|
|||
|
|
|||
|
if (irmp_bit < KASEIKYO_COMPLETE_DATA_LEN)
|
|||
|
{
|
|||
|
if (value)
|
|||
|
{
|
|||
|
xor_check[irmp_bit / 8] |= 1 << (irmp_bit % 8);
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
xor_check[irmp_bit / 8] &= ~(1 << (irmp_bit % 8));
|
|||
|
}
|
|||
|
}
|
|||
|
}
|
|||
|
else
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_MITSU_HEAVY_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_MITSU_HEAVY_PROTOCOL) // squeeze 64 bits into 16 bits:
|
|||
|
{
|
|||
|
if (irmp_bit == 72 )
|
|||
|
{ // irmp_tmp_address, irmp_tmp_command received: check parity & compress
|
|||
|
mitsu_parity = PARITY_CHECK_OK;
|
|||
|
|
|||
|
check = irmp_tmp_address >> 8; // inverted upper byte == lower byte?
|
|||
|
check = ~ check;
|
|||
|
|
|||
|
if (check == (irmp_tmp_address & 0xFF))
|
|||
|
{ // ok:
|
|||
|
irmp_tmp_address <<= 8; // throw away upper byte
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
mitsu_parity = PARITY_CHECK_FAILED;
|
|||
|
}
|
|||
|
|
|||
|
check = irmp_tmp_command >> 8; // inverted upper byte == lower byte?
|
|||
|
check = ~ check;
|
|||
|
if (check == (irmp_tmp_command & 0xFF))
|
|||
|
{ // ok: pack together
|
|||
|
irmp_tmp_address |= irmp_tmp_command & 0xFF; // byte 1, byte2 in irmp_tmp_address, irmp_tmp_command can be used for byte 3
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
mitsu_parity = PARITY_CHECK_FAILED;
|
|||
|
}
|
|||
|
irmp_tmp_command = 0;
|
|||
|
}
|
|||
|
|
|||
|
if (irmp_bit >= 72 )
|
|||
|
{ // receive 3. word in irmp_tmp_command
|
|||
|
irmp_tmp_command <<= 1;
|
|||
|
irmp_tmp_command |= value;
|
|||
|
}
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_MITSU_HEAVY_PROTOCOL
|
|||
|
{
|
|||
|
;
|
|||
|
}
|
|||
|
|
|||
|
irmp_bit++;
|
|||
|
}
|
|||
|
|
|||
|
/*---------------------------------------------------------------------------------------------------------------------------------------------------
|
|||
|
* store bit
|
|||
|
* @details store bit in temp address or temp command
|
|||
|
* @param value to store: 0 or 1
|
|||
|
*---------------------------------------------------------------------------------------------------------------------------------------------------
|
|||
|
*/
|
|||
|
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1)
|
|||
|
static void
|
|||
|
irmp_store_bit2 (uint_fast8_t value)
|
|||
|
{
|
|||
|
uint_fast8_t irmp_bit2;
|
|||
|
|
|||
|
if (irmp_param.protocol)
|
|||
|
{
|
|||
|
irmp_bit2 = irmp_bit - 2;
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
irmp_bit2 = irmp_bit - 1;
|
|||
|
}
|
|||
|
|
|||
|
if (irmp_bit2 >= irmp_param2.address_offset && irmp_bit2 < irmp_param2.address_end)
|
|||
|
{
|
|||
|
irmp_tmp_address2 |= (((uint_fast16_t) (value)) << (irmp_bit2 - irmp_param2.address_offset)); // CV wants cast
|
|||
|
}
|
|||
|
else if (irmp_bit2 >= irmp_param2.command_offset && irmp_bit2 < irmp_param2.command_end)
|
|||
|
{
|
|||
|
irmp_tmp_command2 |= (((uint_fast16_t) (value)) << (irmp_bit2 - irmp_param2.command_offset)); // CV wants cast
|
|||
|
}
|
|||
|
}
|
|||
|
#endif // IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1)
|
|||
|
|
|||
|
/*---------------------------------------------------------------------------------------------------------------------------------------------------
|
|||
|
* ISR routine
|
|||
|
* @details ISR routine, called 10000 times per second
|
|||
|
*---------------------------------------------------------------------------------------------------------------------------------------------------
|
|||
|
*/
|
|||
|
uint_fast8_t
|
|||
|
irmp_ISR (void)
|
|||
|
{
|
|||
|
static uint_fast8_t irmp_start_bit_detected; // flag: start bit detected
|
|||
|
static uint_fast8_t wait_for_space; // flag: wait for data bit space
|
|||
|
static uint_fast8_t wait_for_start_space; // flag: wait for start bit space
|
|||
|
static uint_fast8_t irmp_pulse_time; // count bit time for pulse
|
|||
|
static PAUSE_LEN irmp_pause_time; // count bit time for pause
|
|||
|
static uint_fast16_t last_irmp_address = 0xFFFF; // save last irmp address to recognize key repetition
|
|||
|
static uint_fast16_t last_irmp_command = 0xFFFF; // save last irmp command to recognize key repetition
|
|||
|
static uint_fast16_t key_repetition_len; // SIRCS repeats frame 2-5 times with 45 ms pause
|
|||
|
static uint_fast8_t repetition_frame_number;
|
|||
|
#if IRMP_SUPPORT_DENON_PROTOCOL == 1
|
|||
|
static uint_fast16_t last_irmp_denon_command; // save last irmp command to recognize DENON frame repetition
|
|||
|
static uint_fast16_t denon_repetition_len = 0xFFFF; // denon repetition len of 2nd auto generated frame
|
|||
|
#endif
|
|||
|
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 || IRMP_SUPPORT_S100_PROTOCOL == 1
|
|||
|
static uint_fast8_t rc5_cmd_bit6; // bit 6 of RC5 command is the inverted 2nd start bit
|
|||
|
#endif
|
|||
|
#if IRMP_SUPPORT_MANCHESTER == 1
|
|||
|
static PAUSE_LEN last_pause; // last pause value
|
|||
|
#endif
|
|||
|
#if IRMP_SUPPORT_MANCHESTER == 1 || IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL == 1
|
|||
|
static uint_fast8_t last_value; // last bit value
|
|||
|
#endif
|
|||
|
uint_fast8_t irmp_input; // input value
|
|||
|
|
|||
|
#ifdef ANALYZE
|
|||
|
time_counter++;
|
|||
|
#endif // ANALYZE
|
|||
|
|
|||
|
#if defined(__SDCC_stm8)
|
|||
|
irmp_input = input(IRMP_GPIO_STRUCT->IDR)
|
|||
|
#elif defined(__MBED__)
|
|||
|
//irmp_input = inputPin;
|
|||
|
irmp_input = gpio_read (&gpioIRin);
|
|||
|
#else
|
|||
|
irmp_input = gpio_read(IRMP_BIT_NUMBER);
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_USE_CALLBACK == 1
|
|||
|
if (irmp_callback_ptr)
|
|||
|
{
|
|||
|
static uint_fast8_t last_inverted_input;
|
|||
|
|
|||
|
if (last_inverted_input != !irmp_input)
|
|||
|
{
|
|||
|
(*irmp_callback_ptr) (! irmp_input);
|
|||
|
last_inverted_input = !irmp_input;
|
|||
|
}
|
|||
|
}
|
|||
|
#endif // IRMP_USE_CALLBACK == 1
|
|||
|
|
|||
|
irmp_log(irmp_input); // log ir signal, if IRMP_LOGGING defined
|
|||
|
|
|||
|
if (! irmp_ir_detected) // ir code already detected?
|
|||
|
{ // no...
|
|||
|
if (! irmp_start_bit_detected) // start bit detected?
|
|||
|
{ // no...
|
|||
|
if (! irmp_input) // receiving burst?
|
|||
|
{ // yes...
|
|||
|
// irmp_busy_flag = TRUE;
|
|||
|
#ifdef ANALYZE
|
|||
|
if (! irmp_pulse_time)
|
|||
|
{
|
|||
|
ANALYZE_PRINTF("%8.3fms [starting pulse]\n", (double) (time_counter * 1000) / F_INTERRUPTS);
|
|||
|
}
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_pulse_time++; // increment counter
|
|||
|
}
|
|||
|
else
|
|||
|
{ // no...
|
|||
|
if (irmp_pulse_time) // it's dark....
|
|||
|
{ // set flags for counting the time of darkness...
|
|||
|
irmp_start_bit_detected = 1;
|
|||
|
wait_for_start_space = 1;
|
|||
|
wait_for_space = 0;
|
|||
|
irmp_tmp_command = 0;
|
|||
|
irmp_tmp_address = 0;
|
|||
|
#if IRMP_SUPPORT_KASEIKYO_PROTOCOL == 1
|
|||
|
genre2 = 0;
|
|||
|
#endif
|
|||
|
#if IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1
|
|||
|
irmp_tmp_id = 0;
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1) || IRMP_SUPPORT_NEC42_PROTOCOL == 1
|
|||
|
irmp_tmp_command2 = 0;
|
|||
|
irmp_tmp_address2 = 0;
|
|||
|
#endif
|
|||
|
#if IRMP_SUPPORT_LGAIR_PROTOCOL == 1
|
|||
|
irmp_lgair_command = 0;
|
|||
|
irmp_lgair_address = 0;
|
|||
|
#endif
|
|||
|
irmp_bit = 0xff;
|
|||
|
irmp_pause_time = 1; // 1st pause: set to 1, not to 0!
|
|||
|
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 || IRMP_SUPPORT_S100_PROTOCOL == 1
|
|||
|
rc5_cmd_bit6 = 0; // fm 2010-03-07: bugfix: reset it after incomplete RC5 frame!
|
|||
|
#endif
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
if (key_repetition_len < 0xFFFF) // avoid overflow of counter
|
|||
|
{
|
|||
|
key_repetition_len++;
|
|||
|
|
|||
|
#if IRMP_SUPPORT_DENON_PROTOCOL == 1
|
|||
|
if (denon_repetition_len < 0xFFFF) // avoid overflow of counter
|
|||
|
{
|
|||
|
denon_repetition_len++;
|
|||
|
|
|||
|
if (denon_repetition_len >= DENON_AUTO_REPETITION_PAUSE_LEN && last_irmp_denon_command != 0)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("%8.3fms warning: did not receive inverted command repetition\n",
|
|||
|
(double) (time_counter * 1000) / F_INTERRUPTS);
|
|||
|
#endif // ANALYZE
|
|||
|
last_irmp_denon_command = 0;
|
|||
|
denon_repetition_len = 0xFFFF;
|
|||
|
}
|
|||
|
}
|
|||
|
#endif // IRMP_SUPPORT_DENON_PROTOCOL == 1
|
|||
|
}
|
|||
|
}
|
|||
|
}
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
if (wait_for_start_space) // we have received start bit...
|
|||
|
{ // ...and are counting the time of darkness
|
|||
|
if (irmp_input) // still dark?
|
|||
|
{ // yes
|
|||
|
irmp_pause_time++; // increment counter
|
|||
|
|
|||
|
#if IRMP_SUPPORT_NIKON_PROTOCOL == 1
|
|||
|
if (((irmp_pulse_time < NIKON_START_BIT_PULSE_LEN_MIN || irmp_pulse_time > NIKON_START_BIT_PULSE_LEN_MAX) && irmp_pause_time > IRMP_TIMEOUT_LEN) ||
|
|||
|
irmp_pause_time > IRMP_TIMEOUT_NIKON_LEN)
|
|||
|
#else
|
|||
|
if (irmp_pause_time > IRMP_TIMEOUT_LEN) // timeout?
|
|||
|
#endif
|
|||
|
{ // yes...
|
|||
|
#if IRMP_SUPPORT_JVC_PROTOCOL == 1
|
|||
|
if (irmp_protocol == IRMP_JVC_PROTOCOL) // don't show eror if JVC protocol, irmp_pulse_time has been set below!
|
|||
|
{
|
|||
|
;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_JVC_PROTOCOL == 1
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("%8.3fms error 1: pause after start bit pulse %d too long: %d\n", (double) (time_counter * 1000) / F_INTERRUPTS, irmp_pulse_time, irmp_pause_time);
|
|||
|
ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');
|
|||
|
#endif // ANALYZE
|
|||
|
}
|
|||
|
|
|||
|
irmp_start_bit_detected = 0; // reset flags, let's wait for another start bit
|
|||
|
irmp_pulse_time = 0;
|
|||
|
irmp_pause_time = 0;
|
|||
|
}
|
|||
|
}
|
|||
|
else
|
|||
|
{ // receiving first data pulse!
|
|||
|
IRMP_PARAMETER * irmp_param_p;
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) 0;
|
|||
|
|
|||
|
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1)
|
|||
|
irmp_param2.protocol = 0;
|
|||
|
#endif
|
|||
|
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("%8.3fms [start-bit: pulse = %2d, pause = %2d]\n", (double) (time_counter * 1000) / F_INTERRUPTS, irmp_pulse_time, irmp_pause_time);
|
|||
|
#endif // ANALYZE
|
|||
|
|
|||
|
#if IRMP_SUPPORT_SIRCS_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= SIRCS_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= SIRCS_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= SIRCS_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= SIRCS_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{ // it's SIRCS
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = SIRCS, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
SIRCS_START_BIT_PULSE_LEN_MIN, SIRCS_START_BIT_PULSE_LEN_MAX,
|
|||
|
SIRCS_START_BIT_PAUSE_LEN_MIN, SIRCS_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &sircs_param;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_SIRCS_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_JVC_PROTOCOL == 1
|
|||
|
if (irmp_protocol == IRMP_JVC_PROTOCOL && // last protocol was JVC, awaiting repeat frame
|
|||
|
irmp_pulse_time >= JVC_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= JVC_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= JVC_REPEAT_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= JVC_REPEAT_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = NEC or JVC (type 1) repeat frame, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
JVC_START_BIT_PULSE_LEN_MIN, JVC_START_BIT_PULSE_LEN_MAX,
|
|||
|
JVC_REPEAT_START_BIT_PAUSE_LEN_MIN, JVC_REPEAT_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &nec_param;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_JVC_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_NEC_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= NEC_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= NEC_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= NEC_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= NEC_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{
|
|||
|
#if IRMP_SUPPORT_NEC42_PROTOCOL == 1
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = NEC42, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
NEC_START_BIT_PULSE_LEN_MIN, NEC_START_BIT_PULSE_LEN_MAX,
|
|||
|
NEC_START_BIT_PAUSE_LEN_MIN, NEC_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &nec42_param;
|
|||
|
#else
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = NEC, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
NEC_START_BIT_PULSE_LEN_MIN, NEC_START_BIT_PULSE_LEN_MAX,
|
|||
|
NEC_START_BIT_PAUSE_LEN_MIN, NEC_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &nec_param;
|
|||
|
#endif
|
|||
|
}
|
|||
|
else if (irmp_pulse_time >= NEC_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= NEC_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= NEC_REPEAT_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= NEC_REPEAT_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{ // it's NEC
|
|||
|
#if IRMP_SUPPORT_JVC_PROTOCOL == 1
|
|||
|
if (irmp_protocol == IRMP_JVC_PROTOCOL) // last protocol was JVC, awaiting repeat frame
|
|||
|
{ // some jvc remote controls use nec repetition frame for jvc repetition frame
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = JVC repeat frame type 2, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
NEC_START_BIT_PULSE_LEN_MIN, NEC_START_BIT_PULSE_LEN_MAX,
|
|||
|
NEC_REPEAT_START_BIT_PAUSE_LEN_MIN, NEC_REPEAT_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &nec_param;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_JVC_PROTOCOL == 1
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = NEC (repetition frame), start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
NEC_START_BIT_PULSE_LEN_MIN, NEC_START_BIT_PULSE_LEN_MAX,
|
|||
|
NEC_REPEAT_START_BIT_PAUSE_LEN_MIN, NEC_REPEAT_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &nec_rep_param;
|
|||
|
}
|
|||
|
}
|
|||
|
else
|
|||
|
|
|||
|
#if IRMP_SUPPORT_JVC_PROTOCOL == 1
|
|||
|
if (irmp_protocol == IRMP_JVC_PROTOCOL && // last protocol was JVC, awaiting repeat frame
|
|||
|
irmp_pulse_time >= NEC_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= NEC_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= NEC_0_PAUSE_LEN_MIN && irmp_pause_time <= NEC_0_PAUSE_LEN_MAX)
|
|||
|
{ // it's JVC repetition type 3
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = JVC repeat frame type 3, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
NEC_START_BIT_PULSE_LEN_MIN, NEC_START_BIT_PULSE_LEN_MAX,
|
|||
|
NEC_0_PAUSE_LEN_MIN, NEC_0_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &nec_param;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_JVC_PROTOCOL == 1
|
|||
|
|
|||
|
#endif // IRMP_SUPPORT_NEC_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_TELEFUNKEN_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= TELEFUNKEN_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= TELEFUNKEN_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= TELEFUNKEN_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= TELEFUNKEN_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = TELEFUNKEN, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
TELEFUNKEN_START_BIT_PULSE_LEN_MIN, TELEFUNKEN_START_BIT_PULSE_LEN_MAX,
|
|||
|
TELEFUNKEN_START_BIT_PAUSE_LEN_MIN, TELEFUNKEN_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &telefunken_param;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_TELEFUNKEN_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_ROOMBA_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= ROOMBA_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= ROOMBA_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= ROOMBA_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= ROOMBA_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = ROOMBA, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
ROOMBA_START_BIT_PULSE_LEN_MIN, ROOMBA_START_BIT_PULSE_LEN_MAX,
|
|||
|
ROOMBA_START_BIT_PAUSE_LEN_MIN, ROOMBA_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &roomba_param;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_ROOMBA_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_ACP24_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= ACP24_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= ACP24_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= ACP24_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= ACP24_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = ACP24, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
ACP24_START_BIT_PULSE_LEN_MIN, ACP24_START_BIT_PULSE_LEN_MAX,
|
|||
|
ACP24_START_BIT_PAUSE_LEN_MIN, ACP24_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &acp24_param;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_ROOMBA_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_PENTAX_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= PENTAX_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= PENTAX_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= PENTAX_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= PENTAX_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = PENTAX, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
PENTAX_START_BIT_PULSE_LEN_MIN, PENTAX_START_BIT_PULSE_LEN_MAX,
|
|||
|
PENTAX_START_BIT_PAUSE_LEN_MIN, PENTAX_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &pentax_param;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_PENTAX_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_NIKON_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= NIKON_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= NIKON_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= NIKON_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= NIKON_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = NIKON, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
NIKON_START_BIT_PULSE_LEN_MIN, NIKON_START_BIT_PULSE_LEN_MAX,
|
|||
|
NIKON_START_BIT_PAUSE_LEN_MIN, NIKON_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &nikon_param;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_NIKON_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= SAMSUNG_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= SAMSUNG_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= SAMSUNG_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= SAMSUNG_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{ // it's SAMSUNG
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = SAMSUNG, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
SAMSUNG_START_BIT_PULSE_LEN_MIN, SAMSUNG_START_BIT_PULSE_LEN_MAX,
|
|||
|
SAMSUNG_START_BIT_PAUSE_LEN_MIN, SAMSUNG_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &samsung_param;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_SAMSUNGAH_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= SAMSUNGAH_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= SAMSUNGAH_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= SAMSUNGAH_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= SAMSUNGAH_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{ // it's SAMSUNGAH
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = SAMSUNGAH, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
SAMSUNGAH_START_BIT_PULSE_LEN_MIN, SAMSUNGAH_START_BIT_PULSE_LEN_MAX,
|
|||
|
SAMSUNGAH_START_BIT_PAUSE_LEN_MIN, SAMSUNGAH_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &samsungah_param;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_SAMSUNGAH_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_MATSUSHITA_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= MATSUSHITA_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= MATSUSHITA_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= MATSUSHITA_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= MATSUSHITA_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{ // it's MATSUSHITA
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = MATSUSHITA, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
MATSUSHITA_START_BIT_PULSE_LEN_MIN, MATSUSHITA_START_BIT_PULSE_LEN_MAX,
|
|||
|
MATSUSHITA_START_BIT_PAUSE_LEN_MIN, MATSUSHITA_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &matsushita_param;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_MATSUSHITA_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_KASEIKYO_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= KASEIKYO_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= KASEIKYO_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= KASEIKYO_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= KASEIKYO_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{ // it's KASEIKYO
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = KASEIKYO, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
KASEIKYO_START_BIT_PULSE_LEN_MIN, KASEIKYO_START_BIT_PULSE_LEN_MAX,
|
|||
|
KASEIKYO_START_BIT_PAUSE_LEN_MIN, KASEIKYO_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &kaseikyo_param;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_KASEIKYO_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_PANASONIC_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= PANASONIC_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= PANASONIC_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= PANASONIC_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= PANASONIC_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{ // it's PANASONIC
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = PANASONIC, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
PANASONIC_START_BIT_PULSE_LEN_MIN, PANASONIC_START_BIT_PULSE_LEN_MAX,
|
|||
|
PANASONIC_START_BIT_PAUSE_LEN_MIN, PANASONIC_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &panasonic_param;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_PANASONIC_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_MITSU_HEAVY_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= MITSU_HEAVY_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= MITSU_HEAVY_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= MITSU_HEAVY_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= MITSU_HEAVY_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{ // it's MITSU_HEAVY
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = MITSU_HEAVY, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
MITSU_HEAVY_START_BIT_PULSE_LEN_MIN, MITSU_HEAVY_START_BIT_PULSE_LEN_MAX,
|
|||
|
MITSU_HEAVY_START_BIT_PAUSE_LEN_MIN, MITSU_HEAVY_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &mitsu_heavy_param;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_MITSU_HEAVY_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_VINCENT_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= VINCENT_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= VINCENT_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= VINCENT_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= VINCENT_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{ // it's VINCENT
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = VINCENT, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
VINCENT_START_BIT_PULSE_LEN_MIN, VINCENT_START_BIT_PULSE_LEN_MAX,
|
|||
|
VINCENT_START_BIT_PAUSE_LEN_MIN, VINCENT_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &vincent_param;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_VINCENT_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_RADIO1_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= RADIO1_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= RADIO1_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= RADIO1_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= RADIO1_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = RADIO1, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
RADIO1_START_BIT_PULSE_LEN_MIN, RADIO1_START_BIT_PULSE_LEN_MAX,
|
|||
|
RADIO1_START_BIT_PAUSE_LEN_MIN, RADIO1_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &radio1_param;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_RRADIO1_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_RECS80_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= RECS80_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= RECS80_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= RECS80_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= RECS80_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{ // it's RECS80
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = RECS80, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
RECS80_START_BIT_PULSE_LEN_MIN, RECS80_START_BIT_PULSE_LEN_MAX,
|
|||
|
RECS80_START_BIT_PAUSE_LEN_MIN, RECS80_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &recs80_param;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_RECS80_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_S100_PROTOCOL == 1
|
|||
|
if (((irmp_pulse_time >= S100_START_BIT_LEN_MIN && irmp_pulse_time <= S100_START_BIT_LEN_MAX) ||
|
|||
|
(irmp_pulse_time >= 2 * S100_START_BIT_LEN_MIN && irmp_pulse_time <= 2 * S100_START_BIT_LEN_MAX)) &&
|
|||
|
((irmp_pause_time >= S100_START_BIT_LEN_MIN && irmp_pause_time <= S100_START_BIT_LEN_MAX) ||
|
|||
|
(irmp_pause_time >= 2 * S100_START_BIT_LEN_MIN && irmp_pause_time <= 2 * S100_START_BIT_LEN_MAX)))
|
|||
|
{ // it's S100
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = S100, start bit timings: pulse: %3d - %3d, pause: %3d - %3d or pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
S100_START_BIT_LEN_MIN, S100_START_BIT_LEN_MAX,
|
|||
|
2 * S100_START_BIT_LEN_MIN, 2 * S100_START_BIT_LEN_MAX,
|
|||
|
S100_START_BIT_LEN_MIN, S100_START_BIT_LEN_MAX,
|
|||
|
2 * S100_START_BIT_LEN_MIN, 2 * S100_START_BIT_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &s100_param;
|
|||
|
last_pause = irmp_pause_time;
|
|||
|
|
|||
|
if ((irmp_pulse_time > S100_START_BIT_LEN_MAX && irmp_pulse_time <= 2 * S100_START_BIT_LEN_MAX) ||
|
|||
|
(irmp_pause_time > S100_START_BIT_LEN_MAX && irmp_pause_time <= 2 * S100_START_BIT_LEN_MAX))
|
|||
|
{
|
|||
|
last_value = 0;
|
|||
|
rc5_cmd_bit6 = 1<<6;
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
last_value = 1;
|
|||
|
}
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_S100_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_RC5_PROTOCOL == 1
|
|||
|
if (((irmp_pulse_time >= RC5_START_BIT_LEN_MIN && irmp_pulse_time <= RC5_START_BIT_LEN_MAX) ||
|
|||
|
(irmp_pulse_time >= 2 * RC5_START_BIT_LEN_MIN && irmp_pulse_time <= 2 * RC5_START_BIT_LEN_MAX)) &&
|
|||
|
((irmp_pause_time >= RC5_START_BIT_LEN_MIN && irmp_pause_time <= RC5_START_BIT_LEN_MAX) ||
|
|||
|
(irmp_pause_time >= 2 * RC5_START_BIT_LEN_MIN && irmp_pause_time <= 2 * RC5_START_BIT_LEN_MAX)))
|
|||
|
{ // it's RC5
|
|||
|
#if IRMP_SUPPORT_FDC_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= FDC_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= FDC_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= FDC_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= FDC_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = RC5 or FDC\n");
|
|||
|
ANALYZE_PRINTF ("FDC start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
FDC_START_BIT_PULSE_LEN_MIN, FDC_START_BIT_PULSE_LEN_MAX,
|
|||
|
FDC_START_BIT_PAUSE_LEN_MIN, FDC_START_BIT_PAUSE_LEN_MAX);
|
|||
|
ANALYZE_PRINTF ("RC5 start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
RC5_START_BIT_LEN_MIN, RC5_START_BIT_LEN_MAX,
|
|||
|
RC5_START_BIT_LEN_MIN, RC5_START_BIT_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
memcpy_P (&irmp_param2, &fdc_param, sizeof (IRMP_PARAMETER));
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_FDC_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_RCCAR_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= RCCAR_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= RCCAR_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= RCCAR_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= RCCAR_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = RC5 or RCCAR\n");
|
|||
|
ANALYZE_PRINTF ("RCCAR start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
RCCAR_START_BIT_PULSE_LEN_MIN, RCCAR_START_BIT_PULSE_LEN_MAX,
|
|||
|
RCCAR_START_BIT_PAUSE_LEN_MIN, RCCAR_START_BIT_PAUSE_LEN_MAX);
|
|||
|
ANALYZE_PRINTF ("RC5 start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
RC5_START_BIT_LEN_MIN, RC5_START_BIT_LEN_MAX,
|
|||
|
RC5_START_BIT_LEN_MIN, RC5_START_BIT_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
memcpy_P (&irmp_param2, &rccar_param, sizeof (IRMP_PARAMETER));
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_RCCAR_PROTOCOL == 1
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = RC5, start bit timings: pulse: %3d - %3d, pause: %3d - %3d or pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
RC5_START_BIT_LEN_MIN, RC5_START_BIT_LEN_MAX,
|
|||
|
2 * RC5_START_BIT_LEN_MIN, 2 * RC5_START_BIT_LEN_MAX,
|
|||
|
RC5_START_BIT_LEN_MIN, RC5_START_BIT_LEN_MAX,
|
|||
|
2 * RC5_START_BIT_LEN_MIN, 2 * RC5_START_BIT_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
}
|
|||
|
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &rc5_param;
|
|||
|
last_pause = irmp_pause_time;
|
|||
|
|
|||
|
if ((irmp_pulse_time > RC5_START_BIT_LEN_MAX && irmp_pulse_time <= 2 * RC5_START_BIT_LEN_MAX) ||
|
|||
|
(irmp_pause_time > RC5_START_BIT_LEN_MAX && irmp_pause_time <= 2 * RC5_START_BIT_LEN_MAX))
|
|||
|
{
|
|||
|
last_value = 0;
|
|||
|
rc5_cmd_bit6 = 1<<6;
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
last_value = 1;
|
|||
|
}
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_RC5_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_DENON_PROTOCOL == 1
|
|||
|
if ( (irmp_pulse_time >= DENON_PULSE_LEN_MIN && irmp_pulse_time <= DENON_PULSE_LEN_MAX) &&
|
|||
|
((irmp_pause_time >= DENON_1_PAUSE_LEN_MIN && irmp_pause_time <= DENON_1_PAUSE_LEN_MAX) ||
|
|||
|
(irmp_pause_time >= DENON_0_PAUSE_LEN_MIN && irmp_pause_time <= DENON_0_PAUSE_LEN_MAX)))
|
|||
|
{ // it's DENON
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = DENON, start bit timings: pulse: %3d - %3d, pause: %3d - %3d or %3d - %3d\n",
|
|||
|
DENON_PULSE_LEN_MIN, DENON_PULSE_LEN_MAX,
|
|||
|
DENON_1_PAUSE_LEN_MIN, DENON_1_PAUSE_LEN_MAX,
|
|||
|
DENON_0_PAUSE_LEN_MIN, DENON_0_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &denon_param;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_DENON_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_THOMSON_PROTOCOL == 1
|
|||
|
if ( (irmp_pulse_time >= THOMSON_PULSE_LEN_MIN && irmp_pulse_time <= THOMSON_PULSE_LEN_MAX) &&
|
|||
|
((irmp_pause_time >= THOMSON_1_PAUSE_LEN_MIN && irmp_pause_time <= THOMSON_1_PAUSE_LEN_MAX) ||
|
|||
|
(irmp_pause_time >= THOMSON_0_PAUSE_LEN_MIN && irmp_pause_time <= THOMSON_0_PAUSE_LEN_MAX)))
|
|||
|
{ // it's THOMSON
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = THOMSON, start bit timings: pulse: %3d - %3d, pause: %3d - %3d or %3d - %3d\n",
|
|||
|
THOMSON_PULSE_LEN_MIN, THOMSON_PULSE_LEN_MAX,
|
|||
|
THOMSON_1_PAUSE_LEN_MIN, THOMSON_1_PAUSE_LEN_MAX,
|
|||
|
THOMSON_0_PAUSE_LEN_MIN, THOMSON_0_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &thomson_param;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_THOMSON_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_BOSE_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= BOSE_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= BOSE_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= BOSE_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= BOSE_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = BOSE, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
BOSE_START_BIT_PULSE_LEN_MIN, BOSE_START_BIT_PULSE_LEN_MAX,
|
|||
|
BOSE_START_BIT_PAUSE_LEN_MIN, BOSE_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &bose_param;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_BOSE_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_RC6_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= RC6_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= RC6_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= RC6_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= RC6_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{ // it's RC6
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = RC6, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
RC6_START_BIT_PULSE_LEN_MIN, RC6_START_BIT_PULSE_LEN_MAX,
|
|||
|
RC6_START_BIT_PAUSE_LEN_MIN, RC6_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &rc6_param;
|
|||
|
last_pause = 0;
|
|||
|
last_value = 1;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_RC6_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_RECS80EXT_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= RECS80EXT_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= RECS80EXT_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= RECS80EXT_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= RECS80EXT_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{ // it's RECS80EXT
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = RECS80EXT, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
RECS80EXT_START_BIT_PULSE_LEN_MIN, RECS80EXT_START_BIT_PULSE_LEN_MAX,
|
|||
|
RECS80EXT_START_BIT_PAUSE_LEN_MIN, RECS80EXT_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &recs80ext_param;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_RECS80EXT_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_NUBERT_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= NUBERT_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= NUBERT_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= NUBERT_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= NUBERT_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{ // it's NUBERT
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = NUBERT, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
NUBERT_START_BIT_PULSE_LEN_MIN, NUBERT_START_BIT_PULSE_LEN_MAX,
|
|||
|
NUBERT_START_BIT_PAUSE_LEN_MIN, NUBERT_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &nubert_param;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_NUBERT_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_FAN_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= FAN_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= FAN_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= FAN_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= FAN_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{ // it's FAN
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = FAN, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
FAN_START_BIT_PULSE_LEN_MIN, FAN_START_BIT_PULSE_LEN_MAX,
|
|||
|
FAN_START_BIT_PAUSE_LEN_MIN, FAN_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &fan_param;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_FAN_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_SPEAKER_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= SPEAKER_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= SPEAKER_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= SPEAKER_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= SPEAKER_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{ // it's SPEAKER
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = SPEAKER, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
SPEAKER_START_BIT_PULSE_LEN_MIN, SPEAKER_START_BIT_PULSE_LEN_MAX,
|
|||
|
SPEAKER_START_BIT_PAUSE_LEN_MIN, SPEAKER_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &speaker_param;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_SPEAKER_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= BANG_OLUFSEN_START_BIT1_PULSE_LEN_MIN && irmp_pulse_time <= BANG_OLUFSEN_START_BIT1_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= BANG_OLUFSEN_START_BIT1_PAUSE_LEN_MIN && irmp_pause_time <= BANG_OLUFSEN_START_BIT1_PAUSE_LEN_MAX)
|
|||
|
{ // it's BANG_OLUFSEN
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = BANG_OLUFSEN\n");
|
|||
|
ANALYZE_PRINTF ("start bit 1 timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
BANG_OLUFSEN_START_BIT1_PULSE_LEN_MIN, BANG_OLUFSEN_START_BIT1_PULSE_LEN_MAX,
|
|||
|
BANG_OLUFSEN_START_BIT1_PAUSE_LEN_MIN, BANG_OLUFSEN_START_BIT1_PAUSE_LEN_MAX);
|
|||
|
ANALYZE_PRINTF ("start bit 2 timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
BANG_OLUFSEN_START_BIT2_PULSE_LEN_MIN, BANG_OLUFSEN_START_BIT2_PULSE_LEN_MAX,
|
|||
|
BANG_OLUFSEN_START_BIT2_PAUSE_LEN_MIN, BANG_OLUFSEN_START_BIT2_PAUSE_LEN_MAX);
|
|||
|
ANALYZE_PRINTF ("start bit 3 timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
BANG_OLUFSEN_START_BIT3_PULSE_LEN_MIN, BANG_OLUFSEN_START_BIT3_PULSE_LEN_MAX,
|
|||
|
BANG_OLUFSEN_START_BIT3_PAUSE_LEN_MIN, BANG_OLUFSEN_START_BIT3_PAUSE_LEN_MAX);
|
|||
|
ANALYZE_PRINTF ("start bit 4 timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
BANG_OLUFSEN_START_BIT4_PULSE_LEN_MIN, BANG_OLUFSEN_START_BIT4_PULSE_LEN_MAX,
|
|||
|
BANG_OLUFSEN_START_BIT4_PAUSE_LEN_MIN, BANG_OLUFSEN_START_BIT4_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &bang_olufsen_param;
|
|||
|
last_value = 0;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_GRUNDIG_NOKIA_IR60_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= GRUNDIG_NOKIA_IR60_START_BIT_LEN_MIN && irmp_pulse_time <= GRUNDIG_NOKIA_IR60_START_BIT_LEN_MAX &&
|
|||
|
irmp_pause_time >= GRUNDIG_NOKIA_IR60_PRE_PAUSE_LEN_MIN && irmp_pause_time <= GRUNDIG_NOKIA_IR60_PRE_PAUSE_LEN_MAX)
|
|||
|
{ // it's GRUNDIG
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = GRUNDIG, pre bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
GRUNDIG_NOKIA_IR60_START_BIT_LEN_MIN, GRUNDIG_NOKIA_IR60_START_BIT_LEN_MAX,
|
|||
|
GRUNDIG_NOKIA_IR60_PRE_PAUSE_LEN_MIN, GRUNDIG_NOKIA_IR60_PRE_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &grundig_param;
|
|||
|
last_pause = irmp_pause_time;
|
|||
|
last_value = 1;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_GRUNDIG_NOKIA_IR60_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_MERLIN_PROTOCOL == 1 // check MERLIN before RUWIDO!
|
|||
|
if (irmp_pulse_time >= MERLIN_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= MERLIN_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= MERLIN_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= MERLIN_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{ // it's MERLIN
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = MERLIN, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
MERLIN_START_BIT_PULSE_LEN_MIN, MERLIN_START_BIT_PULSE_LEN_MAX,
|
|||
|
MERLIN_START_BIT_PAUSE_LEN_MIN, MERLIN_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &merlin_param;
|
|||
|
last_pause = 0;
|
|||
|
last_value = 1;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_MERLIN_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_SIEMENS_OR_RUWIDO_PROTOCOL == 1
|
|||
|
if (((irmp_pulse_time >= SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MAX) ||
|
|||
|
(irmp_pulse_time >= 2 * SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= 2 * SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MAX)) &&
|
|||
|
((irmp_pause_time >= SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MAX) ||
|
|||
|
(irmp_pause_time >= 2 * SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= 2 * SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MAX)))
|
|||
|
{ // it's RUWIDO or SIEMENS
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = RUWIDO, start bit timings: pulse: %3d - %3d or %3d - %3d, pause: %3d - %3d or %3d - %3d\n",
|
|||
|
SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MIN, SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MAX,
|
|||
|
2 * SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MIN, 2 * SIEMENS_OR_RUWIDO_START_BIT_PULSE_LEN_MAX,
|
|||
|
SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MIN, SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MAX,
|
|||
|
2 * SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MIN, 2 * SIEMENS_OR_RUWIDO_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &ruwido_param;
|
|||
|
last_pause = irmp_pause_time;
|
|||
|
last_value = 1;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_SIEMENS_OR_RUWIDO_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_FDC_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= FDC_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= FDC_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= FDC_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= FDC_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = FDC, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
FDC_START_BIT_PULSE_LEN_MIN, FDC_START_BIT_PULSE_LEN_MAX,
|
|||
|
FDC_START_BIT_PAUSE_LEN_MIN, FDC_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &fdc_param;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_FDC_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_RCCAR_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= RCCAR_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= RCCAR_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= RCCAR_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= RCCAR_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = RCCAR, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
RCCAR_START_BIT_PULSE_LEN_MIN, RCCAR_START_BIT_PULSE_LEN_MAX,
|
|||
|
RCCAR_START_BIT_PAUSE_LEN_MIN, RCCAR_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &rccar_param;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_RCCAR_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_KATHREIN_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= KATHREIN_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= KATHREIN_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= KATHREIN_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= KATHREIN_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{ // it's KATHREIN
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = KATHREIN, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
KATHREIN_START_BIT_PULSE_LEN_MIN, KATHREIN_START_BIT_PULSE_LEN_MAX,
|
|||
|
KATHREIN_START_BIT_PAUSE_LEN_MIN, KATHREIN_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &kathrein_param;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_KATHREIN_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_NETBOX_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= NETBOX_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= NETBOX_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= NETBOX_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= NETBOX_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{ // it's NETBOX
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = NETBOX, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
NETBOX_START_BIT_PULSE_LEN_MIN, NETBOX_START_BIT_PULSE_LEN_MAX,
|
|||
|
NETBOX_START_BIT_PAUSE_LEN_MIN, NETBOX_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &netbox_param;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_NETBOX_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_LEGO_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= LEGO_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= LEGO_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= LEGO_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= LEGO_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = LEGO, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
LEGO_START_BIT_PULSE_LEN_MIN, LEGO_START_BIT_PULSE_LEN_MAX,
|
|||
|
LEGO_START_BIT_PAUSE_LEN_MIN, LEGO_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &lego_param;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_LEGO_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_A1TVBOX_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= A1TVBOX_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= A1TVBOX_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= A1TVBOX_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= A1TVBOX_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{ // it's A1TVBOX
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = A1TVBOX, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
A1TVBOX_START_BIT_PULSE_LEN_MIN, A1TVBOX_START_BIT_PULSE_LEN_MAX,
|
|||
|
A1TVBOX_START_BIT_PAUSE_LEN_MIN, A1TVBOX_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &a1tvbox_param;
|
|||
|
last_pause = 0;
|
|||
|
last_value = 1;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_A1TVBOX_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_ORTEK_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= ORTEK_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= ORTEK_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= ORTEK_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= ORTEK_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{ // it's ORTEK (Hama)
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = ORTEK, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
ORTEK_START_BIT_PULSE_LEN_MIN, ORTEK_START_BIT_PULSE_LEN_MAX,
|
|||
|
ORTEK_START_BIT_PAUSE_LEN_MIN, ORTEK_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &ortek_param;
|
|||
|
last_pause = 0;
|
|||
|
last_value = 1;
|
|||
|
parity = 0;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_ORTEK_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_RCMM_PROTOCOL == 1
|
|||
|
if (irmp_pulse_time >= RCMM32_START_BIT_PULSE_LEN_MIN && irmp_pulse_time <= RCMM32_START_BIT_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= RCMM32_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= RCMM32_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{ // it's RCMM
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = RCMM, start bit timings: pulse: %3d - %3d, pause: %3d - %3d\n",
|
|||
|
RCMM32_START_BIT_PULSE_LEN_MIN, RCMM32_START_BIT_PULSE_LEN_MAX,
|
|||
|
RCMM32_START_BIT_PAUSE_LEN_MIN, RCMM32_START_BIT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param_p = (IRMP_PARAMETER *) &rcmm_param;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_RCMM_PROTOCOL == 1
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("protocol = UNKNOWN\n");
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_start_bit_detected = 0; // wait for another start bit...
|
|||
|
}
|
|||
|
|
|||
|
if (irmp_start_bit_detected)
|
|||
|
{
|
|||
|
memcpy_P (&irmp_param, irmp_param_p, sizeof (IRMP_PARAMETER));
|
|||
|
|
|||
|
if (! (irmp_param.flags & IRMP_PARAM_FLAG_IS_MANCHESTER))
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("pulse_1: %3d - %3d\n", irmp_param.pulse_1_len_min, irmp_param.pulse_1_len_max);
|
|||
|
ANALYZE_PRINTF ("pause_1: %3d - %3d\n", irmp_param.pause_1_len_min, irmp_param.pause_1_len_max);
|
|||
|
#endif // ANALYZE
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("pulse: %3d - %3d or %3d - %3d\n", irmp_param.pulse_1_len_min, irmp_param.pulse_1_len_max,
|
|||
|
2 * irmp_param.pulse_1_len_min, 2 * irmp_param.pulse_1_len_max);
|
|||
|
ANALYZE_PRINTF ("pause: %3d - %3d or %3d - %3d\n", irmp_param.pause_1_len_min, irmp_param.pause_1_len_max,
|
|||
|
2 * irmp_param.pause_1_len_min, 2 * irmp_param.pause_1_len_max);
|
|||
|
#endif // ANALYZE
|
|||
|
}
|
|||
|
|
|||
|
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1)
|
|||
|
if (irmp_param2.protocol)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("pulse_0: %3d - %3d\n", irmp_param2.pulse_0_len_min, irmp_param2.pulse_0_len_max);
|
|||
|
ANALYZE_PRINTF ("pause_0: %3d - %3d\n", irmp_param2.pause_0_len_min, irmp_param2.pause_0_len_max);
|
|||
|
ANALYZE_PRINTF ("pulse_1: %3d - %3d\n", irmp_param2.pulse_1_len_min, irmp_param2.pulse_1_len_max);
|
|||
|
ANALYZE_PRINTF ("pause_1: %3d - %3d\n", irmp_param2.pause_1_len_min, irmp_param2.pause_1_len_max);
|
|||
|
#endif // ANALYZE
|
|||
|
}
|
|||
|
#endif
|
|||
|
|
|||
|
|
|||
|
#if IRMP_SUPPORT_RC6_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_RC6_PROTOCOL)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("pulse_toggle: %3d - %3d\n", RC6_TOGGLE_BIT_LEN_MIN, RC6_TOGGLE_BIT_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
}
|
|||
|
#endif
|
|||
|
|
|||
|
if (! (irmp_param.flags & IRMP_PARAM_FLAG_IS_MANCHESTER))
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("pulse_0: %3d - %3d\n", irmp_param.pulse_0_len_min, irmp_param.pulse_0_len_max);
|
|||
|
ANALYZE_PRINTF ("pause_0: %3d - %3d\n", irmp_param.pause_0_len_min, irmp_param.pause_0_len_max);
|
|||
|
#endif // ANALYZE
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("pulse: %3d - %3d or %3d - %3d\n", irmp_param.pulse_0_len_min, irmp_param.pulse_0_len_max,
|
|||
|
2 * irmp_param.pulse_0_len_min, 2 * irmp_param.pulse_0_len_max);
|
|||
|
ANALYZE_PRINTF ("pause: %3d - %3d or %3d - %3d\n", irmp_param.pause_0_len_min, irmp_param.pause_0_len_max,
|
|||
|
2 * irmp_param.pause_0_len_min, 2 * irmp_param.pause_0_len_max);
|
|||
|
#endif // ANALYZE
|
|||
|
}
|
|||
|
|
|||
|
#ifdef ANALYZE
|
|||
|
#if IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_BANG_OLUFSEN_PROTOCOL)
|
|||
|
{
|
|||
|
ANALYZE_PRINTF ("pulse_r: %3d - %3d\n", irmp_param.pulse_0_len_min, irmp_param.pulse_0_len_max);
|
|||
|
ANALYZE_PRINTF ("pause_r: %3d - %3d\n", BANG_OLUFSEN_R_PAUSE_LEN_MIN, BANG_OLUFSEN_R_PAUSE_LEN_MAX);
|
|||
|
}
|
|||
|
#endif
|
|||
|
|
|||
|
ANALYZE_PRINTF ("command_offset: %2d\n", irmp_param.command_offset);
|
|||
|
ANALYZE_PRINTF ("command_len: %3d\n", irmp_param.command_end - irmp_param.command_offset);
|
|||
|
ANALYZE_PRINTF ("complete_len: %3d\n", irmp_param.complete_len);
|
|||
|
ANALYZE_PRINTF ("stop_bit: %3d\n", irmp_param.stop_bit);
|
|||
|
#endif // ANALYZE
|
|||
|
}
|
|||
|
|
|||
|
irmp_bit = 0;
|
|||
|
|
|||
|
#if IRMP_SUPPORT_MANCHESTER == 1
|
|||
|
if ((irmp_param.flags & IRMP_PARAM_FLAG_IS_MANCHESTER) &&
|
|||
|
irmp_param.protocol != IRMP_RUWIDO_PROTOCOL && // Manchester, but not RUWIDO
|
|||
|
irmp_param.protocol != IRMP_RC6_PROTOCOL) // Manchester, but not RC6
|
|||
|
{
|
|||
|
if (irmp_pause_time > irmp_param.pulse_1_len_max && irmp_pause_time <= 2 * irmp_param.pulse_1_len_max)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("%8.3fms [bit %2d: pulse = %3d, pause = %3d] ", (double) (time_counter * 1000) / F_INTERRUPTS, irmp_bit, irmp_pulse_time, irmp_pause_time);
|
|||
|
ANALYZE_PUTCHAR ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? '0' : '1');
|
|||
|
ANALYZE_NEWLINE ();
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_store_bit ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? 0 : 1);
|
|||
|
}
|
|||
|
else if (! last_value) // && irmp_pause_time >= irmp_param.pause_1_len_min && irmp_pause_time <= irmp_param.pause_1_len_max)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("%8.3fms [bit %2d: pulse = %3d, pause = %3d] ", (double) (time_counter * 1000) / F_INTERRUPTS, irmp_bit, irmp_pulse_time, irmp_pause_time);
|
|||
|
ANALYZE_PUTCHAR ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? '1' : '0');
|
|||
|
ANALYZE_NEWLINE ();
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_store_bit ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? 1 : 0);
|
|||
|
}
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_MANCHESTER == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_SERIAL == 1
|
|||
|
if (irmp_param.flags & IRMP_PARAM_FLAG_IS_SERIAL)
|
|||
|
{
|
|||
|
; // do nothing
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_SERIAL == 1
|
|||
|
|
|||
|
|
|||
|
#if IRMP_SUPPORT_DENON_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_DENON_PROTOCOL)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("%8.3fms [bit %2d: pulse = %3d, pause = %3d] ", (double) (time_counter * 1000) / F_INTERRUPTS, irmp_bit, irmp_pulse_time, irmp_pause_time);
|
|||
|
#endif // ANALYZE
|
|||
|
|
|||
|
if (irmp_pause_time >= DENON_1_PAUSE_LEN_MIN && irmp_pause_time <= DENON_1_PAUSE_LEN_MAX)
|
|||
|
{ // pause timings correct for "1"?
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PUTCHAR ('1'); // yes, store 1
|
|||
|
ANALYZE_NEWLINE ();
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_store_bit (1);
|
|||
|
}
|
|||
|
else // if (irmp_pause_time >= DENON_0_PAUSE_LEN_MIN && irmp_pause_time <= DENON_0_PAUSE_LEN_MAX)
|
|||
|
{ // pause timings correct for "0"?
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PUTCHAR ('0'); // yes, store 0
|
|||
|
ANALYZE_NEWLINE ();
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_store_bit (0);
|
|||
|
}
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_DENON_PROTOCOL == 1
|
|||
|
#if IRMP_SUPPORT_THOMSON_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_THOMSON_PROTOCOL)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("%8.3fms [bit %2d: pulse = %3d, pause = %3d] ", (double) (time_counter * 1000) / F_INTERRUPTS, irmp_bit, irmp_pulse_time, irmp_pause_time);
|
|||
|
#endif // ANALYZE
|
|||
|
|
|||
|
if (irmp_pause_time >= THOMSON_1_PAUSE_LEN_MIN && irmp_pause_time <= THOMSON_1_PAUSE_LEN_MAX)
|
|||
|
{ // pause timings correct for "1"?
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PUTCHAR ('1'); // yes, store 1
|
|||
|
ANALYZE_NEWLINE ();
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_store_bit (1);
|
|||
|
}
|
|||
|
else // if (irmp_pause_time >= THOMSON_0_PAUSE_LEN_MIN && irmp_pause_time <= THOMSON_0_PAUSE_LEN_MAX)
|
|||
|
{ // pause timings correct for "0"?
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PUTCHAR ('0'); // yes, store 0
|
|||
|
ANALYZE_NEWLINE ();
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_store_bit (0);
|
|||
|
}
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_THOMSON_PROTOCOL == 1
|
|||
|
{
|
|||
|
; // else do nothing
|
|||
|
}
|
|||
|
|
|||
|
irmp_pulse_time = 1; // set counter to 1, not 0
|
|||
|
irmp_pause_time = 0;
|
|||
|
wait_for_start_space = 0;
|
|||
|
}
|
|||
|
}
|
|||
|
else if (wait_for_space) // the data section....
|
|||
|
{ // counting the time of darkness....
|
|||
|
uint_fast8_t got_light = FALSE;
|
|||
|
|
|||
|
if (irmp_input) // still dark?
|
|||
|
{ // yes...
|
|||
|
if (irmp_bit == irmp_param.complete_len && irmp_param.stop_bit == 1)
|
|||
|
{
|
|||
|
if (
|
|||
|
#if IRMP_SUPPORT_MANCHESTER == 1
|
|||
|
(irmp_param.flags & IRMP_PARAM_FLAG_IS_MANCHESTER) ||
|
|||
|
#endif
|
|||
|
#if IRMP_SUPPORT_SERIAL == 1
|
|||
|
(irmp_param.flags & IRMP_PARAM_FLAG_IS_SERIAL) ||
|
|||
|
#endif
|
|||
|
(irmp_pulse_time >= irmp_param.pulse_0_len_min && irmp_pulse_time <= irmp_param.pulse_0_len_max))
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
if (! (irmp_param.flags & IRMP_PARAM_FLAG_IS_MANCHESTER))
|
|||
|
{
|
|||
|
ANALYZE_PRINTF ("stop bit detected\n");
|
|||
|
}
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param.stop_bit = 0;
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("error: stop bit timing wrong, irmp_bit = %d, irmp_pulse_time = %d, pulse_0_len_min = %d, pulse_0_len_max = %d\n",
|
|||
|
irmp_bit, irmp_pulse_time, irmp_param.pulse_0_len_min, irmp_param.pulse_0_len_max);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_start_bit_detected = 0; // wait for another start bit...
|
|||
|
irmp_pulse_time = 0;
|
|||
|
irmp_pause_time = 0;
|
|||
|
}
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
irmp_pause_time++; // increment counter
|
|||
|
|
|||
|
#if IRMP_SUPPORT_SIRCS_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_SIRCS_PROTOCOL && // Sony has a variable number of bits:
|
|||
|
irmp_pause_time > SIRCS_PAUSE_LEN_MAX && // minimum is 12
|
|||
|
irmp_bit >= 12 - 1) // pause too long?
|
|||
|
{ // yes, break and close this frame
|
|||
|
irmp_param.complete_len = irmp_bit + 1; // set new complete length
|
|||
|
got_light = TRUE; // this is a lie, but helps (generates stop bit)
|
|||
|
irmp_tmp_address |= (irmp_bit - SIRCS_MINIMUM_DATA_LEN + 1) << 8; // new: store number of additional bits in upper byte of address!
|
|||
|
irmp_param.command_end = irmp_param.command_offset + irmp_bit + 1; // correct command length
|
|||
|
irmp_pause_time = SIRCS_PAUSE_LEN_MAX - 1; // correct pause length
|
|||
|
}
|
|||
|
else
|
|||
|
#endif
|
|||
|
#if IRMP_SUPPORT_FAN_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_FAN_PROTOCOL && // FAN has no stop bit.
|
|||
|
irmp_bit >= FAN_COMPLETE_DATA_LEN - 1) // last bit in frame
|
|||
|
{ // yes, break and close this frame
|
|||
|
if (irmp_pulse_time <= FAN_0_PULSE_LEN_MAX && irmp_pause_time >= FAN_0_PAUSE_LEN_MIN)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("Generating virtual stop bit\n");
|
|||
|
#endif // ANALYZE
|
|||
|
got_light = TRUE; // this is a lie, but helps (generates stop bit)
|
|||
|
}
|
|||
|
else if (irmp_pulse_time >= FAN_1_PULSE_LEN_MIN && irmp_pause_time >= FAN_1_PAUSE_LEN_MIN)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("Generating virtual stop bit\n");
|
|||
|
#endif // ANALYZE
|
|||
|
got_light = TRUE; // this is a lie, but helps (generates stop bit)
|
|||
|
}
|
|||
|
}
|
|||
|
else
|
|||
|
#endif
|
|||
|
#if IRMP_SUPPORT_SERIAL == 1
|
|||
|
// NETBOX generates no stop bit, here is the timeout condition:
|
|||
|
if ((irmp_param.flags & IRMP_PARAM_FLAG_IS_SERIAL) && irmp_param.protocol == IRMP_NETBOX_PROTOCOL &&
|
|||
|
irmp_pause_time >= NETBOX_PULSE_LEN * (NETBOX_COMPLETE_DATA_LEN - irmp_bit))
|
|||
|
{
|
|||
|
got_light = TRUE; // this is a lie, but helps (generates stop bit)
|
|||
|
}
|
|||
|
else
|
|||
|
#endif
|
|||
|
#if IRMP_SUPPORT_GRUNDIG_NOKIA_IR60_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_GRUNDIG_PROTOCOL && !irmp_param.stop_bit)
|
|||
|
{
|
|||
|
if (irmp_pause_time > IR60_TIMEOUT_LEN && (irmp_bit == 5 || irmp_bit == 6))
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("Switching to IR60 protocol\n");
|
|||
|
#endif // ANALYZE
|
|||
|
got_light = TRUE; // this is a lie, but generates a stop bit ;-)
|
|||
|
irmp_param.stop_bit = TRUE; // set flag
|
|||
|
|
|||
|
irmp_param.protocol = IRMP_IR60_PROTOCOL; // change protocol
|
|||
|
irmp_param.complete_len = IR60_COMPLETE_DATA_LEN; // correct complete len
|
|||
|
irmp_param.address_offset = IR60_ADDRESS_OFFSET;
|
|||
|
irmp_param.address_end = IR60_ADDRESS_OFFSET + IR60_ADDRESS_LEN;
|
|||
|
irmp_param.command_offset = IR60_COMMAND_OFFSET;
|
|||
|
irmp_param.command_end = IR60_COMMAND_OFFSET + IR60_COMMAND_LEN;
|
|||
|
|
|||
|
irmp_tmp_command <<= 1;
|
|||
|
irmp_tmp_command |= first_bit;
|
|||
|
}
|
|||
|
else if (irmp_pause_time >= 2 * irmp_param.pause_1_len_max && irmp_bit >= GRUNDIG_COMPLETE_DATA_LEN - 2)
|
|||
|
{ // special manchester decoder
|
|||
|
irmp_param.complete_len = GRUNDIG_COMPLETE_DATA_LEN; // correct complete len
|
|||
|
got_light = TRUE; // this is a lie, but generates a stop bit ;-)
|
|||
|
irmp_param.stop_bit = TRUE; // set flag
|
|||
|
}
|
|||
|
else if (irmp_bit >= GRUNDIG_COMPLETE_DATA_LEN)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("Switching to NOKIA protocol, irmp_bit = %d\n", irmp_bit);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param.protocol = IRMP_NOKIA_PROTOCOL; // change protocol
|
|||
|
irmp_param.address_offset = NOKIA_ADDRESS_OFFSET;
|
|||
|
irmp_param.address_end = NOKIA_ADDRESS_OFFSET + NOKIA_ADDRESS_LEN;
|
|||
|
irmp_param.command_offset = NOKIA_COMMAND_OFFSET;
|
|||
|
irmp_param.command_end = NOKIA_COMMAND_OFFSET + NOKIA_COMMAND_LEN;
|
|||
|
|
|||
|
if (irmp_tmp_command & 0x300)
|
|||
|
{
|
|||
|
irmp_tmp_address = (irmp_tmp_command >> 8);
|
|||
|
irmp_tmp_command &= 0xFF;
|
|||
|
}
|
|||
|
}
|
|||
|
}
|
|||
|
else
|
|||
|
#endif
|
|||
|
#if IRMP_SUPPORT_SIEMENS_OR_RUWIDO_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_RUWIDO_PROTOCOL && !irmp_param.stop_bit)
|
|||
|
{
|
|||
|
if (irmp_pause_time >= 2 * irmp_param.pause_1_len_max && irmp_bit >= RUWIDO_COMPLETE_DATA_LEN - 2)
|
|||
|
{ // special manchester decoder
|
|||
|
irmp_param.complete_len = RUWIDO_COMPLETE_DATA_LEN; // correct complete len
|
|||
|
got_light = TRUE; // this is a lie, but generates a stop bit ;-)
|
|||
|
irmp_param.stop_bit = TRUE; // set flag
|
|||
|
}
|
|||
|
else if (irmp_bit >= RUWIDO_COMPLETE_DATA_LEN)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("Switching to SIEMENS protocol\n");
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param.protocol = IRMP_SIEMENS_PROTOCOL; // change protocol
|
|||
|
irmp_param.address_offset = SIEMENS_ADDRESS_OFFSET;
|
|||
|
irmp_param.address_end = SIEMENS_ADDRESS_OFFSET + SIEMENS_ADDRESS_LEN;
|
|||
|
irmp_param.command_offset = SIEMENS_COMMAND_OFFSET;
|
|||
|
irmp_param.command_end = SIEMENS_COMMAND_OFFSET + SIEMENS_COMMAND_LEN;
|
|||
|
|
|||
|
// 76543210
|
|||
|
// RUWIDO: AAAAAAAAACCCCCCCp
|
|||
|
// SIEMENS: AAAAAAAAAAACCCCCCCCCCp
|
|||
|
irmp_tmp_address <<= 2;
|
|||
|
irmp_tmp_address |= (irmp_tmp_command >> 6);
|
|||
|
irmp_tmp_command &= 0x003F;
|
|||
|
// irmp_tmp_command <<= 4;
|
|||
|
irmp_tmp_command |= last_value;
|
|||
|
}
|
|||
|
}
|
|||
|
else
|
|||
|
#endif
|
|||
|
#if IRMP_SUPPORT_ROOMBA_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_ROOMBA_PROTOCOL && // Roomba has no stop bit
|
|||
|
irmp_bit >= ROOMBA_COMPLETE_DATA_LEN - 1) // it's the last data bit...
|
|||
|
{ // break and close this frame
|
|||
|
if (irmp_pulse_time >= ROOMBA_1_PULSE_LEN_MIN && irmp_pulse_time <= ROOMBA_1_PULSE_LEN_MAX)
|
|||
|
{
|
|||
|
irmp_pause_time = ROOMBA_1_PAUSE_LEN_EXACT;
|
|||
|
}
|
|||
|
else if (irmp_pulse_time >= ROOMBA_0_PULSE_LEN_MIN && irmp_pulse_time <= ROOMBA_0_PULSE_LEN_MAX)
|
|||
|
{
|
|||
|
irmp_pause_time = ROOMBA_0_PAUSE_LEN;
|
|||
|
}
|
|||
|
|
|||
|
got_light = TRUE; // this is a lie, but helps (generates stop bit)
|
|||
|
}
|
|||
|
else
|
|||
|
#endif
|
|||
|
#if IRMP_SUPPORT_MANCHESTER == 1
|
|||
|
if ((irmp_param.flags & IRMP_PARAM_FLAG_IS_MANCHESTER) &&
|
|||
|
irmp_pause_time >= 2 * irmp_param.pause_1_len_max && irmp_bit >= irmp_param.complete_len - 2 && !irmp_param.stop_bit)
|
|||
|
{ // special manchester decoder
|
|||
|
got_light = TRUE; // this is a lie, but generates a stop bit ;-)
|
|||
|
irmp_param.stop_bit = TRUE; // set flag
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_MANCHESTER == 1
|
|||
|
if (irmp_pause_time > IRMP_TIMEOUT_LEN) // timeout?
|
|||
|
{ // yes...
|
|||
|
if (irmp_bit == irmp_param.complete_len - 1 && irmp_param.stop_bit == 0)
|
|||
|
{
|
|||
|
irmp_bit++;
|
|||
|
}
|
|||
|
#if IRMP_SUPPORT_NEC_PROTOCOL == 1
|
|||
|
else if ((irmp_param.protocol == IRMP_NEC_PROTOCOL || irmp_param.protocol == IRMP_NEC42_PROTOCOL) && irmp_bit == 0)
|
|||
|
{ // it was a non-standard repetition frame
|
|||
|
#ifdef ANALYZE // with 4500<30>s pause instead of 2250<35>s
|
|||
|
ANALYZE_PRINTF ("Detected non-standard repetition frame, switching to NEC repetition\n");
|
|||
|
#endif // ANALYZE
|
|||
|
if (key_repetition_len < NEC_FRAME_REPEAT_PAUSE_LEN_MAX)
|
|||
|
{
|
|||
|
irmp_param.stop_bit = TRUE; // set flag
|
|||
|
irmp_param.protocol = IRMP_NEC_PROTOCOL; // switch protocol
|
|||
|
irmp_param.complete_len = irmp_bit; // patch length: 16 or 17
|
|||
|
irmp_tmp_address = last_irmp_address; // address is last address
|
|||
|
irmp_tmp_command = last_irmp_command; // command is last command
|
|||
|
irmp_flags |= IRMP_FLAG_REPETITION;
|
|||
|
key_repetition_len = 0;
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("ignoring NEC repetition frame: timeout occured, key_repetition_len = %d > %d\n",
|
|||
|
key_repetition_len, NEC_FRAME_REPEAT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_ir_detected = FALSE;
|
|||
|
}
|
|||
|
}
|
|||
|
#endif // IRMP_SUPPORT_NEC_PROTOCOL == 1
|
|||
|
#if IRMP_SUPPORT_JVC_PROTOCOL == 1
|
|||
|
else if (irmp_param.protocol == IRMP_NEC_PROTOCOL && (irmp_bit == 16 || irmp_bit == 17)) // it was a JVC stop bit
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("Switching to JVC protocol, irmp_bit = %d\n", irmp_bit);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param.stop_bit = TRUE; // set flag
|
|||
|
irmp_param.protocol = IRMP_JVC_PROTOCOL; // switch protocol
|
|||
|
irmp_param.complete_len = irmp_bit; // patch length: 16 or 17
|
|||
|
irmp_tmp_command = (irmp_tmp_address >> 4); // set command: upper 12 bits are command bits
|
|||
|
irmp_tmp_address = irmp_tmp_address & 0x000F; // lower 4 bits are address bits
|
|||
|
irmp_start_bit_detected = 1; // tricky: don't wait for another start bit...
|
|||
|
}
|
|||
|
#endif // IRMP_SUPPORT_JVC_PROTOCOL == 1
|
|||
|
#if IRMP_SUPPORT_LGAIR_PROTOCOL == 1
|
|||
|
else if (irmp_param.protocol == IRMP_NEC_PROTOCOL && (irmp_bit == 28 || irmp_bit == 29)) // it was a LGAIR stop bit
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("Switching to LGAIR protocol, irmp_bit = %d\n", irmp_bit);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param.stop_bit = TRUE; // set flag
|
|||
|
irmp_param.protocol = IRMP_LGAIR_PROTOCOL; // switch protocol
|
|||
|
irmp_param.complete_len = irmp_bit; // patch length: 16 or 17
|
|||
|
irmp_tmp_command = irmp_lgair_command; // set command: upper 8 bits are command bits
|
|||
|
irmp_tmp_address = irmp_lgair_address; // lower 4 bits are address bits
|
|||
|
irmp_start_bit_detected = 1; // tricky: don't wait for another start bit...
|
|||
|
}
|
|||
|
#endif // IRMP_SUPPORT_LGAIR_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_NEC42_PROTOCOL == 1
|
|||
|
#if IRMP_SUPPORT_NEC_PROTOCOL == 1
|
|||
|
else if (irmp_param.protocol == IRMP_NEC42_PROTOCOL && irmp_bit == 32) // it was a NEC stop bit
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("Switching to NEC protocol\n");
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param.stop_bit = TRUE; // set flag
|
|||
|
irmp_param.protocol = IRMP_NEC_PROTOCOL; // switch protocol
|
|||
|
irmp_param.complete_len = irmp_bit; // patch length: 16 or 17
|
|||
|
|
|||
|
// 0123456789ABC0123456789ABC0123456701234567
|
|||
|
// NEC42: AAAAAAAAAAAAAaaaaaaaaaaaaaCCCCCCCCcccccccc
|
|||
|
// NEC: AAAAAAAAaaaaaaaaCCCCCCCCcccccccc
|
|||
|
irmp_tmp_address |= (irmp_tmp_address2 & 0x0007) << 13; // fm 2012-02-13: 12 -> 13
|
|||
|
irmp_tmp_command = (irmp_tmp_address2 >> 3) | (irmp_tmp_command << 10);
|
|||
|
}
|
|||
|
#endif // IRMP_SUPPORT_NEC_PROTOCOL == 1
|
|||
|
#if IRMP_SUPPORT_LGAIR_PROTOCOL == 1
|
|||
|
else if (irmp_param.protocol == IRMP_NEC42_PROTOCOL && irmp_bit == 28) // it was a NEC stop bit
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("Switching to LGAIR protocol\n");
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param.stop_bit = TRUE; // set flag
|
|||
|
irmp_param.protocol = IRMP_LGAIR_PROTOCOL; // switch protocol
|
|||
|
irmp_param.complete_len = irmp_bit; // patch length: 16 or 17
|
|||
|
irmp_tmp_address = irmp_lgair_address;
|
|||
|
irmp_tmp_command = irmp_lgair_command;
|
|||
|
}
|
|||
|
#endif // IRMP_SUPPORT_LGAIR_PROTOCOL == 1
|
|||
|
#if IRMP_SUPPORT_JVC_PROTOCOL == 1
|
|||
|
else if (irmp_param.protocol == IRMP_NEC42_PROTOCOL && (irmp_bit == 16 || irmp_bit == 17)) // it was a JVC stop bit
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("Switching to JVC protocol, irmp_bit = %d\n", irmp_bit);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param.stop_bit = TRUE; // set flag
|
|||
|
irmp_param.protocol = IRMP_JVC_PROTOCOL; // switch protocol
|
|||
|
irmp_param.complete_len = irmp_bit; // patch length: 16 or 17
|
|||
|
|
|||
|
// 0123456789ABC0123456789ABC0123456701234567
|
|||
|
// NEC42: AAAAAAAAAAAAAaaaaaaaaaaaaaCCCCCCCCcccccccc
|
|||
|
// JVC: AAAACCCCCCCCCCCC
|
|||
|
irmp_tmp_command = (irmp_tmp_address >> 4) | (irmp_tmp_address2 << 9); // set command: upper 12 bits are command bits
|
|||
|
irmp_tmp_address = irmp_tmp_address & 0x000F; // lower 4 bits are address bits
|
|||
|
}
|
|||
|
#endif // IRMP_SUPPORT_JVC_PROTOCOL == 1
|
|||
|
#endif // IRMP_SUPPORT_NEC42_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_SAMSUNG48_PROTOCOL == 1
|
|||
|
else if (irmp_param.protocol == IRMP_SAMSUNG48_PROTOCOL && irmp_bit == 32) // it was a SAMSUNG32 stop bit
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("Switching to SAMSUNG32 protocol\n");
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param.protocol = IRMP_SAMSUNG32_PROTOCOL;
|
|||
|
irmp_param.command_offset = SAMSUNG32_COMMAND_OFFSET;
|
|||
|
irmp_param.command_end = SAMSUNG32_COMMAND_OFFSET + SAMSUNG32_COMMAND_LEN;
|
|||
|
irmp_param.complete_len = SAMSUNG32_COMPLETE_DATA_LEN;
|
|||
|
}
|
|||
|
#endif // IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_RCMM_PROTOCOL == 1
|
|||
|
else if (irmp_param.protocol == IRMP_RCMM32_PROTOCOL && (irmp_bit == 12 || irmp_bit == 24)) // it was a RCMM stop bit
|
|||
|
{
|
|||
|
if (irmp_bit == 12)
|
|||
|
{
|
|||
|
irmp_tmp_command = (irmp_tmp_address & 0xFF); // set command: lower 8 bits are command bits
|
|||
|
irmp_tmp_address >>= 8; // upper 4 bits are address bits
|
|||
|
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("Switching to RCMM12 protocol, irmp_bit = %d\n", irmp_bit);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param.protocol = IRMP_RCMM12_PROTOCOL; // switch protocol
|
|||
|
}
|
|||
|
else // if ((irmp_bit == 24)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("Switching to RCMM24 protocol, irmp_bit = %d\n", irmp_bit);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param.protocol = IRMP_RCMM24_PROTOCOL; // switch protocol
|
|||
|
}
|
|||
|
irmp_param.stop_bit = TRUE; // set flag
|
|||
|
irmp_param.complete_len = irmp_bit; // patch length
|
|||
|
}
|
|||
|
#endif // IRMP_SUPPORT_RCMM_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_TECHNICS_PROTOCOL == 1
|
|||
|
else if (irmp_param.protocol == IRMP_MATSUSHITA_PROTOCOL && irmp_bit == 22) // it was a TECHNICS stop bit
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("Switching to TECHNICS protocol, irmp_bit = %d\n", irmp_bit);
|
|||
|
#endif // ANALYZE
|
|||
|
// Situation:
|
|||
|
// The first 12 bits have been stored in irmp_tmp_command (LSB first)
|
|||
|
// The following 10 bits have been stored in irmp_tmp_address (LSB first)
|
|||
|
// The code of TECHNICS is:
|
|||
|
// cccccccccccCCCCCCCCCCC (11 times c and 11 times C)
|
|||
|
// ccccccccccccaaaaaaaaaa
|
|||
|
// where C is inverted value of c
|
|||
|
|
|||
|
irmp_tmp_address <<= 1;
|
|||
|
if (irmp_tmp_command & (1<<11))
|
|||
|
{
|
|||
|
irmp_tmp_address |= 1;
|
|||
|
irmp_tmp_command &= ~(1<<11);
|
|||
|
}
|
|||
|
|
|||
|
if (irmp_tmp_command == ((~irmp_tmp_address) & 0x07FF))
|
|||
|
{
|
|||
|
irmp_tmp_address = 0;
|
|||
|
|
|||
|
irmp_param.protocol = IRMP_TECHNICS_PROTOCOL; // switch protocol
|
|||
|
irmp_param.complete_len = irmp_bit; // patch length
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("error 8: TECHNICS frame error\n");
|
|||
|
ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_start_bit_detected = 0; // wait for another start bit...
|
|||
|
irmp_pulse_time = 0;
|
|||
|
irmp_pause_time = 0;
|
|||
|
}
|
|||
|
}
|
|||
|
#endif // IRMP_SUPPORT_TECHNICS_PROTOCOL == 1
|
|||
|
else
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("error 2: pause %d after data bit %d too long\n", irmp_pause_time, irmp_bit);
|
|||
|
ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_start_bit_detected = 0; // wait for another start bit...
|
|||
|
irmp_pulse_time = 0;
|
|||
|
irmp_pause_time = 0;
|
|||
|
}
|
|||
|
}
|
|||
|
}
|
|||
|
}
|
|||
|
else
|
|||
|
{ // got light now!
|
|||
|
got_light = TRUE;
|
|||
|
}
|
|||
|
|
|||
|
if (got_light)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("%8.3fms [bit %2d: pulse = %3d, pause = %3d] ", (double) (time_counter * 1000) / F_INTERRUPTS, irmp_bit, irmp_pulse_time, irmp_pause_time);
|
|||
|
#endif // ANALYZE
|
|||
|
|
|||
|
#if IRMP_SUPPORT_MANCHESTER == 1
|
|||
|
if ((irmp_param.flags & IRMP_PARAM_FLAG_IS_MANCHESTER)) // Manchester
|
|||
|
{
|
|||
|
#if 1
|
|||
|
if (irmp_pulse_time > irmp_param.pulse_1_len_max /* && irmp_pulse_time <= 2 * irmp_param.pulse_1_len_max */)
|
|||
|
#else // better, but some IR-RCs use asymmetric timings :-/
|
|||
|
if (irmp_pulse_time > irmp_param.pulse_1_len_max && irmp_pulse_time <= 2 * irmp_param.pulse_1_len_max &&
|
|||
|
irmp_pause_time <= 2 * irmp_param.pause_1_len_max)
|
|||
|
#endif
|
|||
|
{
|
|||
|
#if IRMP_SUPPORT_RC6_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_RC6_PROTOCOL && irmp_bit == 4 && irmp_pulse_time > RC6_TOGGLE_BIT_LEN_MIN) // RC6 toggle bit
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PUTCHAR ('T');
|
|||
|
#endif // ANALYZE
|
|||
|
if (irmp_param.complete_len == RC6_COMPLETE_DATA_LEN_LONG) // RC6 mode 6A
|
|||
|
{
|
|||
|
irmp_store_bit (1);
|
|||
|
last_value = 1;
|
|||
|
}
|
|||
|
else // RC6 mode 0
|
|||
|
{
|
|||
|
irmp_store_bit (0);
|
|||
|
last_value = 0;
|
|||
|
}
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_NEWLINE ();
|
|||
|
#endif // ANALYZE
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_RC6_PROTOCOL == 1
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PUTCHAR ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? '0' : '1');
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_store_bit ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? 0 : 1 );
|
|||
|
|
|||
|
#if IRMP_SUPPORT_RC6_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_RC6_PROTOCOL && irmp_bit == 4 && irmp_pulse_time > RC6_TOGGLE_BIT_LEN_MIN) // RC6 toggle bit
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PUTCHAR ('T');
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_store_bit (1);
|
|||
|
|
|||
|
if (irmp_pause_time > 2 * irmp_param.pause_1_len_max)
|
|||
|
{
|
|||
|
last_value = 0;
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
last_value = 1;
|
|||
|
}
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_NEWLINE ();
|
|||
|
#endif // ANALYZE
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_RC6_PROTOCOL == 1
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PUTCHAR ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? '1' : '0');
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_store_bit ((irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? 1 : 0 );
|
|||
|
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1)
|
|||
|
if (! irmp_param2.protocol)
|
|||
|
#endif
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_NEWLINE ();
|
|||
|
#endif // ANALYZE
|
|||
|
}
|
|||
|
last_value = (irmp_param.flags & IRMP_PARAM_FLAG_1ST_PULSE_IS_1) ? 1 : 0;
|
|||
|
}
|
|||
|
}
|
|||
|
}
|
|||
|
else if (irmp_pulse_time >= irmp_param.pulse_1_len_min && irmp_pulse_time <= irmp_param.pulse_1_len_max
|
|||
|
/* && irmp_pause_time <= 2 * irmp_param.pause_1_len_max */)
|
|||
|
{
|
|||
|
uint_fast8_t manchester_value;
|
|||
|
|
|||
|
if (last_pause > irmp_param.pause_1_len_max && last_pause <= 2 * irmp_param.pause_1_len_max)
|
|||
|
{
|
|||
|
manchester_value = last_value ? 0 : 1;
|
|||
|
last_value = manchester_value;
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
manchester_value = last_value;
|
|||
|
}
|
|||
|
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PUTCHAR (manchester_value + '0');
|
|||
|
#endif // ANALYZE
|
|||
|
|
|||
|
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && (IRMP_SUPPORT_FDC_PROTOCOL == 1 || IRMP_SUPPORT_RCCAR_PROTOCOL == 1)
|
|||
|
if (! irmp_param2.protocol)
|
|||
|
#endif
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_NEWLINE ();
|
|||
|
#endif // ANALYZE
|
|||
|
}
|
|||
|
|
|||
|
#if IRMP_SUPPORT_RC6_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_RC6_PROTOCOL && irmp_bit == 1 && manchester_value == 1) // RC6 mode != 0 ???
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("Switching to RC6A protocol\n");
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param.complete_len = RC6_COMPLETE_DATA_LEN_LONG;
|
|||
|
irmp_param.address_offset = 5;
|
|||
|
irmp_param.address_end = irmp_param.address_offset + 15;
|
|||
|
irmp_param.command_offset = irmp_param.address_end + 1; // skip 1 system bit, changes like a toggle bit
|
|||
|
irmp_param.command_end = irmp_param.command_offset + 16 - 1;
|
|||
|
irmp_tmp_address = 0;
|
|||
|
}
|
|||
|
#endif // IRMP_SUPPORT_RC6_PROTOCOL == 1
|
|||
|
|
|||
|
irmp_store_bit (manchester_value);
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && IRMP_SUPPORT_FDC_PROTOCOL == 1
|
|||
|
if (irmp_param2.protocol == IRMP_FDC_PROTOCOL &&
|
|||
|
irmp_pulse_time >= FDC_PULSE_LEN_MIN && irmp_pulse_time <= FDC_PULSE_LEN_MAX &&
|
|||
|
((irmp_pause_time >= FDC_1_PAUSE_LEN_MIN && irmp_pause_time <= FDC_1_PAUSE_LEN_MAX) ||
|
|||
|
(irmp_pause_time >= FDC_0_PAUSE_LEN_MIN && irmp_pause_time <= FDC_0_PAUSE_LEN_MAX)))
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PUTCHAR ('?');
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param.protocol = 0; // switch to FDC, see below
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_FDC_PROTOCOL == 1
|
|||
|
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && IRMP_SUPPORT_RCCAR_PROTOCOL == 1
|
|||
|
if (irmp_param2.protocol == IRMP_RCCAR_PROTOCOL &&
|
|||
|
irmp_pulse_time >= RCCAR_PULSE_LEN_MIN && irmp_pulse_time <= RCCAR_PULSE_LEN_MAX &&
|
|||
|
((irmp_pause_time >= RCCAR_1_PAUSE_LEN_MIN && irmp_pause_time <= RCCAR_1_PAUSE_LEN_MAX) ||
|
|||
|
(irmp_pause_time >= RCCAR_0_PAUSE_LEN_MIN && irmp_pause_time <= RCCAR_0_PAUSE_LEN_MAX)))
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PUTCHAR ('?');
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param.protocol = 0; // switch to RCCAR, see below
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_RCCAR_PROTOCOL == 1
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PUTCHAR ('?');
|
|||
|
ANALYZE_NEWLINE ();
|
|||
|
ANALYZE_PRINTF ("error 3 manchester: timing not correct: data bit %d, pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time);
|
|||
|
ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_start_bit_detected = 0; // reset flags and wait for next start bit
|
|||
|
irmp_pause_time = 0;
|
|||
|
}
|
|||
|
}
|
|||
|
|
|||
|
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && IRMP_SUPPORT_FDC_PROTOCOL == 1
|
|||
|
if (irmp_param2.protocol == IRMP_FDC_PROTOCOL && irmp_pulse_time >= FDC_PULSE_LEN_MIN && irmp_pulse_time <= FDC_PULSE_LEN_MAX)
|
|||
|
{
|
|||
|
if (irmp_pause_time >= FDC_1_PAUSE_LEN_MIN && irmp_pause_time <= FDC_1_PAUSE_LEN_MAX)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF (" 1 (FDC)\n");
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_store_bit2 (1);
|
|||
|
}
|
|||
|
else if (irmp_pause_time >= FDC_0_PAUSE_LEN_MIN && irmp_pause_time <= FDC_0_PAUSE_LEN_MAX)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF (" 0 (FDC)\n");
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_store_bit2 (0);
|
|||
|
}
|
|||
|
|
|||
|
if (! irmp_param.protocol)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("Switching to FDC protocol\n");
|
|||
|
#endif // ANALYZE
|
|||
|
memcpy (&irmp_param, &irmp_param2, sizeof (IRMP_PARAMETER));
|
|||
|
irmp_param2.protocol = 0;
|
|||
|
irmp_tmp_address = irmp_tmp_address2;
|
|||
|
irmp_tmp_command = irmp_tmp_command2;
|
|||
|
}
|
|||
|
}
|
|||
|
#endif // IRMP_SUPPORT_FDC_PROTOCOL == 1
|
|||
|
#if IRMP_SUPPORT_RC5_PROTOCOL == 1 && IRMP_SUPPORT_RCCAR_PROTOCOL == 1
|
|||
|
if (irmp_param2.protocol == IRMP_RCCAR_PROTOCOL && irmp_pulse_time >= RCCAR_PULSE_LEN_MIN && irmp_pulse_time <= RCCAR_PULSE_LEN_MAX)
|
|||
|
{
|
|||
|
if (irmp_pause_time >= RCCAR_1_PAUSE_LEN_MIN && irmp_pause_time <= RCCAR_1_PAUSE_LEN_MAX)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF (" 1 (RCCAR)\n");
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_store_bit2 (1);
|
|||
|
}
|
|||
|
else if (irmp_pause_time >= RCCAR_0_PAUSE_LEN_MIN && irmp_pause_time <= RCCAR_0_PAUSE_LEN_MAX)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF (" 0 (RCCAR)\n");
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_store_bit2 (0);
|
|||
|
}
|
|||
|
|
|||
|
if (! irmp_param.protocol)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("Switching to RCCAR protocol\n");
|
|||
|
#endif // ANALYZE
|
|||
|
memcpy (&irmp_param, &irmp_param2, sizeof (IRMP_PARAMETER));
|
|||
|
irmp_param2.protocol = 0;
|
|||
|
irmp_tmp_address = irmp_tmp_address2;
|
|||
|
irmp_tmp_command = irmp_tmp_command2;
|
|||
|
}
|
|||
|
}
|
|||
|
#endif // IRMP_SUPPORT_RCCAR_PROTOCOL == 1
|
|||
|
|
|||
|
last_pause = irmp_pause_time;
|
|||
|
wait_for_space = 0;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_MANCHESTER == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_SERIAL == 1
|
|||
|
if (irmp_param.flags & IRMP_PARAM_FLAG_IS_SERIAL)
|
|||
|
{
|
|||
|
while (irmp_bit < irmp_param.complete_len && irmp_pulse_time > irmp_param.pulse_1_len_max)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PUTCHAR ('1');
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_store_bit (1);
|
|||
|
|
|||
|
if (irmp_pulse_time >= irmp_param.pulse_1_len_min)
|
|||
|
{
|
|||
|
irmp_pulse_time -= irmp_param.pulse_1_len_min;
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
irmp_pulse_time = 0;
|
|||
|
}
|
|||
|
}
|
|||
|
|
|||
|
while (irmp_bit < irmp_param.complete_len && irmp_pause_time > irmp_param.pause_1_len_max)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PUTCHAR ('0');
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_store_bit (0);
|
|||
|
|
|||
|
if (irmp_pause_time >= irmp_param.pause_1_len_min)
|
|||
|
{
|
|||
|
irmp_pause_time -= irmp_param.pause_1_len_min;
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
irmp_pause_time = 0;
|
|||
|
}
|
|||
|
}
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_NEWLINE ();
|
|||
|
#endif // ANALYZE
|
|||
|
wait_for_space = 0;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_SERIAL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_SAMSUNG_PROTOCOL && irmp_bit == 16) // Samsung: 16th bit
|
|||
|
{
|
|||
|
if (irmp_pulse_time >= SAMSUNG_PULSE_LEN_MIN && irmp_pulse_time <= SAMSUNG_PULSE_LEN_MAX &&
|
|||
|
irmp_pause_time >= SAMSUNG_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= SAMSUNG_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("SYNC\n");
|
|||
|
#endif // ANALYZE
|
|||
|
wait_for_space = 0;
|
|||
|
irmp_bit++;
|
|||
|
}
|
|||
|
else if (irmp_pulse_time >= SAMSUNG_PULSE_LEN_MIN && irmp_pulse_time <= SAMSUNG_PULSE_LEN_MAX)
|
|||
|
{
|
|||
|
#if IRMP_SUPPORT_SAMSUNG48_PROTOCOL == 1
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("Switching to SAMSUNG48 protocol ");
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param.protocol = IRMP_SAMSUNG48_PROTOCOL;
|
|||
|
irmp_param.command_offset = SAMSUNG48_COMMAND_OFFSET;
|
|||
|
irmp_param.command_end = SAMSUNG48_COMMAND_OFFSET + SAMSUNG48_COMMAND_LEN;
|
|||
|
irmp_param.complete_len = SAMSUNG48_COMPLETE_DATA_LEN;
|
|||
|
#else
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("Switching to SAMSUNG32 protocol ");
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param.protocol = IRMP_SAMSUNG32_PROTOCOL;
|
|||
|
irmp_param.command_offset = SAMSUNG32_COMMAND_OFFSET;
|
|||
|
irmp_param.command_end = SAMSUNG32_COMMAND_OFFSET + SAMSUNG32_COMMAND_LEN;
|
|||
|
irmp_param.complete_len = SAMSUNG32_COMPLETE_DATA_LEN;
|
|||
|
#endif
|
|||
|
if (irmp_pause_time >= SAMSUNG_1_PAUSE_LEN_MIN && irmp_pause_time <= SAMSUNG_1_PAUSE_LEN_MAX)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PUTCHAR ('1');
|
|||
|
ANALYZE_NEWLINE ();
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_store_bit (1);
|
|||
|
wait_for_space = 0;
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PUTCHAR ('0');
|
|||
|
ANALYZE_NEWLINE ();
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_store_bit (0);
|
|||
|
wait_for_space = 0;
|
|||
|
}
|
|||
|
}
|
|||
|
else
|
|||
|
{ // timing incorrect!
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("error 3 Samsung: timing not correct: data bit %d, pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time);
|
|||
|
ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_start_bit_detected = 0; // reset flags and wait for next start bit
|
|||
|
irmp_pause_time = 0;
|
|||
|
}
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_SAMSUNG_PROTOCOL
|
|||
|
|
|||
|
#if IRMP_SUPPORT_NEC16_PROTOCOL
|
|||
|
#if IRMP_SUPPORT_NEC42_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_NEC42_PROTOCOL &&
|
|||
|
#else // IRMP_SUPPORT_NEC_PROTOCOL instead
|
|||
|
if (irmp_param.protocol == IRMP_NEC_PROTOCOL &&
|
|||
|
#endif // IRMP_SUPPORT_NEC42_PROTOCOL == 1
|
|||
|
irmp_bit == 8 && irmp_pause_time >= NEC_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= NEC_START_BIT_PAUSE_LEN_MAX)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("Switching to NEC16 protocol\n");
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_param.protocol = IRMP_NEC16_PROTOCOL;
|
|||
|
irmp_param.address_offset = NEC16_ADDRESS_OFFSET;
|
|||
|
irmp_param.address_end = NEC16_ADDRESS_OFFSET + NEC16_ADDRESS_LEN;
|
|||
|
irmp_param.command_offset = NEC16_COMMAND_OFFSET;
|
|||
|
irmp_param.command_end = NEC16_COMMAND_OFFSET + NEC16_COMMAND_LEN;
|
|||
|
irmp_param.complete_len = NEC16_COMPLETE_DATA_LEN;
|
|||
|
wait_for_space = 0;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_NEC16_PROTOCOL
|
|||
|
|
|||
|
#if IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_BANG_OLUFSEN_PROTOCOL)
|
|||
|
{
|
|||
|
if (irmp_pulse_time >= BANG_OLUFSEN_PULSE_LEN_MIN && irmp_pulse_time <= BANG_OLUFSEN_PULSE_LEN_MAX)
|
|||
|
{
|
|||
|
if (irmp_bit == 1) // Bang & Olufsen: 3rd bit
|
|||
|
{
|
|||
|
if (irmp_pause_time >= BANG_OLUFSEN_START_BIT3_PAUSE_LEN_MIN && irmp_pause_time <= BANG_OLUFSEN_START_BIT3_PAUSE_LEN_MAX)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("3rd start bit\n");
|
|||
|
#endif // ANALYZE
|
|||
|
wait_for_space = 0;
|
|||
|
irmp_bit++;
|
|||
|
}
|
|||
|
else
|
|||
|
{ // timing incorrect!
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("error 3a B&O: timing not correct: data bit %d, pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time);
|
|||
|
ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_start_bit_detected = 0; // reset flags and wait for next start bit
|
|||
|
irmp_pause_time = 0;
|
|||
|
}
|
|||
|
}
|
|||
|
else if (irmp_bit == 19) // Bang & Olufsen: trailer bit
|
|||
|
{
|
|||
|
if (irmp_pause_time >= BANG_OLUFSEN_TRAILER_BIT_PAUSE_LEN_MIN && irmp_pause_time <= BANG_OLUFSEN_TRAILER_BIT_PAUSE_LEN_MAX)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("trailer bit\n");
|
|||
|
#endif // ANALYZE
|
|||
|
wait_for_space = 0;
|
|||
|
irmp_bit++;
|
|||
|
}
|
|||
|
else
|
|||
|
{ // timing incorrect!
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("error 3b B&O: timing not correct: data bit %d, pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time);
|
|||
|
ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_start_bit_detected = 0; // reset flags and wait for next start bit
|
|||
|
irmp_pause_time = 0;
|
|||
|
}
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
if (irmp_pause_time >= BANG_OLUFSEN_1_PAUSE_LEN_MIN && irmp_pause_time <= BANG_OLUFSEN_1_PAUSE_LEN_MAX)
|
|||
|
{ // pulse & pause timings correct for "1"?
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PUTCHAR ('1');
|
|||
|
ANALYZE_NEWLINE ();
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_store_bit (1);
|
|||
|
last_value = 1;
|
|||
|
wait_for_space = 0;
|
|||
|
}
|
|||
|
else if (irmp_pause_time >= BANG_OLUFSEN_0_PAUSE_LEN_MIN && irmp_pause_time <= BANG_OLUFSEN_0_PAUSE_LEN_MAX)
|
|||
|
{ // pulse & pause timings correct for "0"?
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PUTCHAR ('0');
|
|||
|
ANALYZE_NEWLINE ();
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_store_bit (0);
|
|||
|
last_value = 0;
|
|||
|
wait_for_space = 0;
|
|||
|
}
|
|||
|
else if (irmp_pause_time >= BANG_OLUFSEN_R_PAUSE_LEN_MIN && irmp_pause_time <= BANG_OLUFSEN_R_PAUSE_LEN_MAX)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PUTCHAR (last_value + '0');
|
|||
|
ANALYZE_NEWLINE ();
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_store_bit (last_value);
|
|||
|
wait_for_space = 0;
|
|||
|
}
|
|||
|
else
|
|||
|
{ // timing incorrect!
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("error 3c B&O: timing not correct: data bit %d, pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time);
|
|||
|
ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_start_bit_detected = 0; // reset flags and wait for next start bit
|
|||
|
irmp_pause_time = 0;
|
|||
|
}
|
|||
|
}
|
|||
|
}
|
|||
|
else
|
|||
|
{ // timing incorrect!
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("error 3d B&O: timing not correct: data bit %d, pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time);
|
|||
|
ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_start_bit_detected = 0; // reset flags and wait for next start bit
|
|||
|
irmp_pause_time = 0;
|
|||
|
}
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_BANG_OLUFSEN_PROTOCOL
|
|||
|
|
|||
|
#if IRMP_SUPPORT_RCMM_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_RCMM32_PROTOCOL)
|
|||
|
{
|
|||
|
if (irmp_pause_time >= RCMM32_BIT_00_PAUSE_LEN_MIN && irmp_pause_time <= RCMM32_BIT_00_PAUSE_LEN_MAX)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PUTCHAR ('0');
|
|||
|
ANALYZE_PUTCHAR ('0');
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_store_bit (0);
|
|||
|
irmp_store_bit (0);
|
|||
|
}
|
|||
|
else if (irmp_pause_time >= RCMM32_BIT_01_PAUSE_LEN_MIN && irmp_pause_time <= RCMM32_BIT_01_PAUSE_LEN_MAX)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PUTCHAR ('0');
|
|||
|
ANALYZE_PUTCHAR ('1');
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_store_bit (0);
|
|||
|
irmp_store_bit (1);
|
|||
|
}
|
|||
|
else if (irmp_pause_time >= RCMM32_BIT_10_PAUSE_LEN_MIN && irmp_pause_time <= RCMM32_BIT_10_PAUSE_LEN_MAX)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PUTCHAR ('1');
|
|||
|
ANALYZE_PUTCHAR ('0');
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_store_bit (1);
|
|||
|
irmp_store_bit (0);
|
|||
|
}
|
|||
|
else if (irmp_pause_time >= RCMM32_BIT_11_PAUSE_LEN_MIN && irmp_pause_time <= RCMM32_BIT_11_PAUSE_LEN_MAX)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PUTCHAR ('1');
|
|||
|
ANALYZE_PUTCHAR ('1');
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_store_bit (1);
|
|||
|
irmp_store_bit (1);
|
|||
|
}
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("\n");
|
|||
|
#endif // ANALYZE
|
|||
|
wait_for_space = 0;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif
|
|||
|
|
|||
|
if (irmp_pulse_time >= irmp_param.pulse_1_len_min && irmp_pulse_time <= irmp_param.pulse_1_len_max &&
|
|||
|
irmp_pause_time >= irmp_param.pause_1_len_min && irmp_pause_time <= irmp_param.pause_1_len_max)
|
|||
|
{ // pulse & pause timings correct for "1"?
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PUTCHAR ('1');
|
|||
|
ANALYZE_NEWLINE ();
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_store_bit (1);
|
|||
|
wait_for_space = 0;
|
|||
|
}
|
|||
|
else if (irmp_pulse_time >= irmp_param.pulse_0_len_min && irmp_pulse_time <= irmp_param.pulse_0_len_max &&
|
|||
|
irmp_pause_time >= irmp_param.pause_0_len_min && irmp_pause_time <= irmp_param.pause_0_len_max)
|
|||
|
{ // pulse & pause timings correct for "0"?
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PUTCHAR ('0');
|
|||
|
ANALYZE_NEWLINE ();
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_store_bit (0);
|
|||
|
wait_for_space = 0;
|
|||
|
}
|
|||
|
else
|
|||
|
#if IRMP_SUPPORT_KATHREIN_PROTOCOL
|
|||
|
|
|||
|
if (irmp_param.protocol == IRMP_KATHREIN_PROTOCOL &&
|
|||
|
irmp_pulse_time >= KATHREIN_1_PULSE_LEN_MIN && irmp_pulse_time <= KATHREIN_1_PULSE_LEN_MAX &&
|
|||
|
(((irmp_bit == 8 || irmp_bit == 6) &&
|
|||
|
irmp_pause_time >= KATHREIN_SYNC_BIT_PAUSE_LEN_MIN && irmp_pause_time <= KATHREIN_SYNC_BIT_PAUSE_LEN_MAX) ||
|
|||
|
(irmp_bit == 12 &&
|
|||
|
irmp_pause_time >= KATHREIN_START_BIT_PAUSE_LEN_MIN && irmp_pause_time <= KATHREIN_START_BIT_PAUSE_LEN_MAX)))
|
|||
|
|
|||
|
{
|
|||
|
if (irmp_bit == 8)
|
|||
|
{
|
|||
|
irmp_bit++;
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PUTCHAR ('S');
|
|||
|
ANALYZE_NEWLINE ();
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_tmp_command <<= 1;
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PUTCHAR ('S');
|
|||
|
ANALYZE_NEWLINE ();
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_store_bit (1);
|
|||
|
}
|
|||
|
wait_for_space = 0;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_KATHREIN_PROTOCOL
|
|||
|
{ // timing incorrect!
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("error 3: timing not correct: data bit %d, pulse: %d, pause: %d\n", irmp_bit, irmp_pulse_time, irmp_pause_time);
|
|||
|
ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_start_bit_detected = 0; // reset flags and wait for next start bit
|
|||
|
irmp_pause_time = 0;
|
|||
|
}
|
|||
|
|
|||
|
irmp_pulse_time = 1; // set counter to 1, not 0
|
|||
|
}
|
|||
|
}
|
|||
|
else
|
|||
|
{ // counting the pulse length ...
|
|||
|
if (! irmp_input) // still light?
|
|||
|
{ // yes...
|
|||
|
irmp_pulse_time++; // increment counter
|
|||
|
}
|
|||
|
else
|
|||
|
{ // now it's dark!
|
|||
|
wait_for_space = 1; // let's count the time (see above)
|
|||
|
irmp_pause_time = 1; // set pause counter to 1, not 0
|
|||
|
}
|
|||
|
}
|
|||
|
|
|||
|
if (irmp_start_bit_detected && irmp_bit == irmp_param.complete_len && irmp_param.stop_bit == 0) // enough bits received?
|
|||
|
{
|
|||
|
if (last_irmp_command == irmp_tmp_command && key_repetition_len < AUTO_FRAME_REPETITION_LEN)
|
|||
|
{
|
|||
|
repetition_frame_number++;
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
repetition_frame_number = 0;
|
|||
|
}
|
|||
|
|
|||
|
#if IRMP_SUPPORT_SIRCS_PROTOCOL == 1
|
|||
|
// if SIRCS protocol and the code will be repeated within 50 ms, we will ignore 2nd and 3rd repetition frame
|
|||
|
if (irmp_param.protocol == IRMP_SIRCS_PROTOCOL && (repetition_frame_number == 1 || repetition_frame_number == 2))
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("code skipped: SIRCS auto repetition frame #%d, counter = %d, auto repetition len = %d\n",
|
|||
|
repetition_frame_number + 1, key_repetition_len, AUTO_FRAME_REPETITION_LEN);
|
|||
|
#endif // ANALYZE
|
|||
|
key_repetition_len = 0;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_ORTEK_PROTOCOL == 1
|
|||
|
// if ORTEK protocol and the code will be repeated within 50 ms, we will ignore 2nd repetition frame
|
|||
|
if (irmp_param.protocol == IRMP_ORTEK_PROTOCOL && repetition_frame_number == 1)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("code skipped: ORTEK auto repetition frame #%d, counter = %d, auto repetition len = %d\n",
|
|||
|
repetition_frame_number + 1, key_repetition_len, AUTO_FRAME_REPETITION_LEN);
|
|||
|
#endif // ANALYZE
|
|||
|
key_repetition_len = 0;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif
|
|||
|
|
|||
|
#if 0 && IRMP_SUPPORT_KASEIKYO_PROTOCOL == 1 // fm 2015-12-02: don't ignore every 2nd frame
|
|||
|
// if KASEIKYO protocol and the code will be repeated within 50 ms, we will ignore 2nd repetition frame
|
|||
|
if (irmp_param.protocol == IRMP_KASEIKYO_PROTOCOL && repetition_frame_number == 1)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("code skipped: KASEIKYO auto repetition frame #%d, counter = %d, auto repetition len = %d\n",
|
|||
|
repetition_frame_number + 1, key_repetition_len, AUTO_FRAME_REPETITION_LEN);
|
|||
|
#endif // ANALYZE
|
|||
|
key_repetition_len = 0;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif
|
|||
|
|
|||
|
#if 0 && IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1 // fm 2015-12-02: don't ignore every 2nd frame
|
|||
|
// if SAMSUNG32 or SAMSUNG48 protocol and the code will be repeated within 50 ms, we will ignore every 2nd frame
|
|||
|
if ((irmp_param.protocol == IRMP_SAMSUNG32_PROTOCOL || irmp_param.protocol == IRMP_SAMSUNG48_PROTOCOL) && (repetition_frame_number & 0x01))
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("code skipped: SAMSUNG32/SAMSUNG48 auto repetition frame #%d, counter = %d, auto repetition len = %d\n",
|
|||
|
repetition_frame_number + 1, key_repetition_len, AUTO_FRAME_REPETITION_LEN);
|
|||
|
#endif // ANALYZE
|
|||
|
key_repetition_len = 0;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_NUBERT_PROTOCOL == 1
|
|||
|
// if NUBERT protocol and the code will be repeated within 50 ms, we will ignore every 2nd frame
|
|||
|
if (irmp_param.protocol == IRMP_NUBERT_PROTOCOL && (repetition_frame_number & 0x01))
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("code skipped: NUBERT auto repetition frame #%d, counter = %d, auto repetition len = %d\n",
|
|||
|
repetition_frame_number + 1, key_repetition_len, AUTO_FRAME_REPETITION_LEN);
|
|||
|
#endif // ANALYZE
|
|||
|
key_repetition_len = 0;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_SPEAKER_PROTOCOL == 1
|
|||
|
// if SPEAKER protocol and the code will be repeated within 50 ms, we will ignore every 2nd frame
|
|||
|
if (irmp_param.protocol == IRMP_SPEAKER_PROTOCOL && (repetition_frame_number & 0x01))
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("code skipped: SPEAKER auto repetition frame #%d, counter = %d, auto repetition len = %d\n",
|
|||
|
repetition_frame_number + 1, key_repetition_len, AUTO_FRAME_REPETITION_LEN);
|
|||
|
#endif // ANALYZE
|
|||
|
key_repetition_len = 0;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif
|
|||
|
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("%8.3fms code detected, length = %d\n", (double) (time_counter * 1000) / F_INTERRUPTS, irmp_bit);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_ir_detected = TRUE;
|
|||
|
|
|||
|
#if IRMP_SUPPORT_DENON_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_DENON_PROTOCOL)
|
|||
|
{ // check for repetition frame
|
|||
|
if ((~irmp_tmp_command & 0x3FF) == last_irmp_denon_command) // command bits must be inverted
|
|||
|
{
|
|||
|
irmp_tmp_command = last_irmp_denon_command; // use command received before!
|
|||
|
last_irmp_denon_command = 0;
|
|||
|
|
|||
|
irmp_protocol = irmp_param.protocol; // store protocol
|
|||
|
irmp_address = irmp_tmp_address; // store address
|
|||
|
irmp_command = irmp_tmp_command; // store command
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
if ((irmp_tmp_command & 0x01) == 0x00)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("%8.3fms info Denon: waiting for inverted command repetition\n", (double) (time_counter * 1000) / F_INTERRUPTS);
|
|||
|
#endif // ANALYZE
|
|||
|
last_irmp_denon_command = irmp_tmp_command;
|
|||
|
denon_repetition_len = 0;
|
|||
|
irmp_ir_detected = FALSE;
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("%8.3fms warning Denon: got unexpected inverted command, ignoring it\n", (double) (time_counter * 1000) / F_INTERRUPTS);
|
|||
|
#endif // ANALYZE
|
|||
|
last_irmp_denon_command = 0;
|
|||
|
irmp_ir_detected = FALSE;
|
|||
|
}
|
|||
|
}
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_DENON_PROTOCOL
|
|||
|
|
|||
|
#if IRMP_SUPPORT_GRUNDIG_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_GRUNDIG_PROTOCOL && irmp_tmp_command == 0x01ff)
|
|||
|
{ // Grundig start frame?
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("Detected GRUNDIG start frame, ignoring it\n");
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_ir_detected = FALSE;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_GRUNDIG_PROTOCOL
|
|||
|
|
|||
|
#if IRMP_SUPPORT_NOKIA_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_NOKIA_PROTOCOL && irmp_tmp_address == 0x00ff && irmp_tmp_command == 0x00fe)
|
|||
|
{ // Nokia start frame?
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("Detected NOKIA start frame, ignoring it\n");
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_ir_detected = FALSE;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_NOKIA_PROTOCOL
|
|||
|
{
|
|||
|
#if IRMP_SUPPORT_NEC_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_NEC_PROTOCOL && irmp_bit == 0) // repetition frame
|
|||
|
{
|
|||
|
if (key_repetition_len < NEC_FRAME_REPEAT_PAUSE_LEN_MAX)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("Detected NEC repetition frame, key_repetition_len = %d\n", key_repetition_len);
|
|||
|
ANALYZE_ONLY_NORMAL_PRINTF("REPETETION FRAME ");
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_tmp_address = last_irmp_address; // address is last address
|
|||
|
irmp_tmp_command = last_irmp_command; // command is last command
|
|||
|
irmp_flags |= IRMP_FLAG_REPETITION;
|
|||
|
key_repetition_len = 0;
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("Detected NEC repetition frame, ignoring it: timeout occured, key_repetition_len = %d > %d\n",
|
|||
|
key_repetition_len, NEC_FRAME_REPEAT_PAUSE_LEN_MAX);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_ir_detected = FALSE;
|
|||
|
}
|
|||
|
}
|
|||
|
#endif // IRMP_SUPPORT_NEC_PROTOCOL
|
|||
|
|
|||
|
#if IRMP_SUPPORT_KASEIKYO_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_KASEIKYO_PROTOCOL)
|
|||
|
{
|
|||
|
uint_fast8_t xor_value;
|
|||
|
|
|||
|
xor_value = (xor_check[0] & 0x0F) ^ ((xor_check[0] & 0xF0) >> 4) ^ (xor_check[1] & 0x0F) ^ ((xor_check[1] & 0xF0) >> 4);
|
|||
|
|
|||
|
if (xor_value != (xor_check[2] & 0x0F))
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("error 4: wrong XOR check for customer id: 0x%1x 0x%1x\n", xor_value, xor_check[2] & 0x0F);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_ir_detected = FALSE;
|
|||
|
}
|
|||
|
|
|||
|
xor_value = xor_check[2] ^ xor_check[3] ^ xor_check[4];
|
|||
|
|
|||
|
if (xor_value != xor_check[5])
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("error 5: wrong XOR check for data bits: 0x%02x 0x%02x\n", xor_value, xor_check[5]);
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_ir_detected = FALSE;
|
|||
|
}
|
|||
|
|
|||
|
irmp_flags |= genre2; // write the genre2 bits into MSB of the flag byte
|
|||
|
}
|
|||
|
#endif // IRMP_SUPPORT_KASEIKYO_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_ORTEK_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_ORTEK_PROTOCOL)
|
|||
|
{
|
|||
|
if (parity == PARITY_CHECK_FAILED)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("error 6: parity check failed\n");
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_ir_detected = FALSE;
|
|||
|
}
|
|||
|
|
|||
|
if ((irmp_tmp_address & 0x03) == 0x02)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("code skipped: ORTEK end of transmission frame (key release)\n");
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_ir_detected = FALSE;
|
|||
|
}
|
|||
|
irmp_tmp_address >>= 2;
|
|||
|
}
|
|||
|
#endif // IRMP_SUPPORT_ORTEK_PROTOCOL == 1
|
|||
|
|
|||
|
#if IRMP_SUPPORT_MITSU_HEAVY_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_MITSU_HEAVY_PROTOCOL)
|
|||
|
{
|
|||
|
check = irmp_tmp_command >> 8; // inverted upper byte == lower byte?
|
|||
|
check = ~ check;
|
|||
|
if (check == (irmp_tmp_command & 0xFF)) { //ok:
|
|||
|
irmp_tmp_command &= 0xFF;
|
|||
|
}
|
|||
|
else mitsu_parity = PARITY_CHECK_FAILED;
|
|||
|
if (mitsu_parity == PARITY_CHECK_FAILED)
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_PRINTF ("error 7: parity check failed\n");
|
|||
|
#endif // ANALYZE
|
|||
|
irmp_ir_detected = FALSE;
|
|||
|
}
|
|||
|
}
|
|||
|
#endif // IRMP_SUPPORT_MITSU_HEAVY_PROTOCOL
|
|||
|
|
|||
|
#if IRMP_SUPPORT_RC6_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_RC6_PROTOCOL && irmp_param.complete_len == RC6_COMPLETE_DATA_LEN_LONG) // RC6 mode = 6?
|
|||
|
{
|
|||
|
irmp_protocol = IRMP_RC6A_PROTOCOL;
|
|||
|
}
|
|||
|
else
|
|||
|
#endif // IRMP_SUPPORT_RC6_PROTOCOL == 1
|
|||
|
{
|
|||
|
irmp_protocol = irmp_param.protocol;
|
|||
|
}
|
|||
|
|
|||
|
#if IRMP_SUPPORT_FDC_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_FDC_PROTOCOL)
|
|||
|
{
|
|||
|
if (irmp_tmp_command & 0x000F) // released key?
|
|||
|
{
|
|||
|
irmp_tmp_command = (irmp_tmp_command >> 4) | 0x80; // yes, set bit 7
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
irmp_tmp_command >>= 4; // no, it's a pressed key
|
|||
|
}
|
|||
|
irmp_tmp_command |= (irmp_tmp_address << 2) & 0x0F00; // 000000CCCCAAAAAA -> 0000CCCC00000000
|
|||
|
irmp_tmp_address &= 0x003F;
|
|||
|
}
|
|||
|
#endif
|
|||
|
|
|||
|
irmp_address = irmp_tmp_address; // store address
|
|||
|
#if IRMP_SUPPORT_NEC_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_NEC_PROTOCOL)
|
|||
|
{
|
|||
|
last_irmp_address = irmp_tmp_address; // store as last address, too
|
|||
|
}
|
|||
|
#endif
|
|||
|
|
|||
|
#if IRMP_SUPPORT_RC5_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_RC5_PROTOCOL)
|
|||
|
{
|
|||
|
irmp_tmp_command |= rc5_cmd_bit6; // store bit 6
|
|||
|
}
|
|||
|
#endif
|
|||
|
#if IRMP_SUPPORT_S100_PROTOCOL == 1
|
|||
|
if (irmp_param.protocol == IRMP_S100_PROTOCOL)
|
|||
|
{
|
|||
|
irmp_tmp_command |= rc5_cmd_bit6; // store bit 6
|
|||
|
}
|
|||
|
#endif
|
|||
|
irmp_command = irmp_tmp_command; // store command
|
|||
|
|
|||
|
#if IRMP_SUPPORT_SAMSUNG_PROTOCOL == 1
|
|||
|
irmp_id = irmp_tmp_id;
|
|||
|
#endif
|
|||
|
}
|
|||
|
}
|
|||
|
|
|||
|
if (irmp_ir_detected)
|
|||
|
{
|
|||
|
if (last_irmp_command == irmp_tmp_command &&
|
|||
|
last_irmp_address == irmp_tmp_address &&
|
|||
|
key_repetition_len < IRMP_KEY_REPETITION_LEN)
|
|||
|
{
|
|||
|
irmp_flags |= IRMP_FLAG_REPETITION;
|
|||
|
}
|
|||
|
|
|||
|
last_irmp_address = irmp_tmp_address; // store as last address, too
|
|||
|
last_irmp_command = irmp_tmp_command; // store as last command, too
|
|||
|
|
|||
|
key_repetition_len = 0;
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
#ifdef ANALYZE
|
|||
|
ANALYZE_ONLY_NORMAL_PUTCHAR ('\n');
|
|||
|
#endif // ANALYZE
|
|||
|
}
|
|||
|
|
|||
|
irmp_start_bit_detected = 0; // and wait for next start bit
|
|||
|
irmp_tmp_command = 0;
|
|||
|
irmp_pulse_time = 0;
|
|||
|
irmp_pause_time = 0;
|
|||
|
|
|||
|
#if IRMP_SUPPORT_JVC_PROTOCOL == 1
|
|||
|
if (irmp_protocol == IRMP_JVC_PROTOCOL) // the stop bit of JVC frame is also start bit of next frame
|
|||
|
{ // set pulse time here!
|
|||
|
irmp_pulse_time = ((uint_fast8_t)(F_INTERRUPTS * JVC_START_BIT_PULSE_TIME));
|
|||
|
}
|
|||
|
#endif // IRMP_SUPPORT_JVC_PROTOCOL == 1
|
|||
|
}
|
|||
|
}
|
|||
|
}
|
|||
|
|
|||
|
#if defined(STELLARIS_ARM_CORTEX_M4)
|
|||
|
// Clear the timer interrupt
|
|||
|
TimerIntClear(TIMER1_BASE, TIMER_TIMA_TIMEOUT);
|
|||
|
#endif
|
|||
|
|
|||
|
return (irmp_ir_detected);
|
|||
|
}
|
|||
|
|
|||
|
#ifdef ANALYZE
|
|||
|
|
|||
|
/*---------------------------------------------------------------------------------------------------------------------------------------------------
|
|||
|
* main functions - for Unix/Linux + Windows only!
|
|||
|
*
|
|||
|
* AVR: see main.c!
|
|||
|
*
|
|||
|
* Compile it under linux with:
|
|||
|
* cc irmp.c -o irmp
|
|||
|
*
|
|||
|
* usage: ./irmp [-v|-s|-a|-l] < file
|
|||
|
*
|
|||
|
* options:
|
|||
|
* -v verbose
|
|||
|
* -s silent
|
|||
|
* -a analyze
|
|||
|
* -l list pulse/pauses
|
|||
|
*---------------------------------------------------------------------------------------------------------------------------------------------------
|
|||
|
*/
|
|||
|
|
|||
|
void
|
|||
|
print_spectrum (char * text, int * buf, int is_pulse)
|
|||
|
{
|
|||
|
int i;
|
|||
|
int j;
|
|||
|
int min;
|
|||
|
int max;
|
|||
|
int max_value = 0;
|
|||
|
int value;
|
|||
|
int sum = 0;
|
|||
|
int counter = 0;
|
|||
|
double average = 0;
|
|||
|
double tolerance;
|
|||
|
|
|||
|
puts ("-----------------------------------------------------------------------------");
|
|||
|
printf ("%s:\n", text);
|
|||
|
|
|||
|
for (i = 0; i < 256; i++)
|
|||
|
{
|
|||
|
if (buf[i] > max_value)
|
|||
|
{
|
|||
|
max_value = buf[i];
|
|||
|
}
|
|||
|
}
|
|||
|
|
|||
|
for (i = 1; i < 200; i++)
|
|||
|
{
|
|||
|
if (buf[i] > 0)
|
|||
|
{
|
|||
|
printf ("%3d ", i);
|
|||
|
value = (buf[i] * 60) / max_value;
|
|||
|
|
|||
|
for (j = 0; j < value; j++)
|
|||
|
{
|
|||
|
putchar ('o');
|
|||
|
}
|
|||
|
printf (" %d\n", buf[i]);
|
|||
|
|
|||
|
sum += i * buf[i];
|
|||
|
counter += buf[i];
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
max = i - 1;
|
|||
|
|
|||
|
if (counter > 0)
|
|||
|
{
|
|||
|
average = (float) sum / (float) counter;
|
|||
|
|
|||
|
if (is_pulse)
|
|||
|
{
|
|||
|
printf ("pulse ");
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
printf ("pause ");
|
|||
|
}
|
|||
|
|
|||
|
printf ("avg: %4.1f=%6.1f us, ", average, (1000000. * average) / (float) F_INTERRUPTS);
|
|||
|
printf ("min: %2d=%6.1f us, ", min, (1000000. * min) / (float) F_INTERRUPTS);
|
|||
|
printf ("max: %2d=%6.1f us, ", max, (1000000. * max) / (float) F_INTERRUPTS);
|
|||
|
|
|||
|
tolerance = (max - average);
|
|||
|
|
|||
|
if (average - min > tolerance)
|
|||
|
{
|
|||
|
tolerance = average - min;
|
|||
|
}
|
|||
|
|
|||
|
tolerance = tolerance * 100 / average;
|
|||
|
printf ("tol: %4.1f%%\n", tolerance);
|
|||
|
}
|
|||
|
|
|||
|
counter = 0;
|
|||
|
sum = 0;
|
|||
|
min = i + 1;
|
|||
|
}
|
|||
|
}
|
|||
|
}
|
|||
|
|
|||
|
#define STATE_LEFT_SHIFT 0x01
|
|||
|
#define STATE_RIGHT_SHIFT 0x02
|
|||
|
#define STATE_LEFT_CTRL 0x04
|
|||
|
#define STATE_LEFT_ALT 0x08
|
|||
|
#define STATE_RIGHT_ALT 0x10
|
|||
|
|
|||
|
#define KEY_ESCAPE 0x1B // keycode = 0x006e
|
|||
|
#define KEY_MENUE 0x80 // keycode = 0x0070
|
|||
|
#define KEY_BACK 0x81 // keycode = 0x0071
|
|||
|
#define KEY_FORWARD 0x82 // keycode = 0x0072
|
|||
|
#define KEY_ADDRESS 0x83 // keycode = 0x0073
|
|||
|
#define KEY_WINDOW 0x84 // keycode = 0x0074
|
|||
|
#define KEY_1ST_PAGE 0x85 // keycode = 0x0075
|
|||
|
#define KEY_STOP 0x86 // keycode = 0x0076
|
|||
|
#define KEY_MAIL 0x87 // keycode = 0x0077
|
|||
|
#define KEY_FAVORITES 0x88 // keycode = 0x0078
|
|||
|
#define KEY_NEW_PAGE 0x89 // keycode = 0x0079
|
|||
|
#define KEY_SETUP 0x8A // keycode = 0x007a
|
|||
|
#define KEY_FONT 0x8B // keycode = 0x007b
|
|||
|
#define KEY_PRINT 0x8C // keycode = 0x007c
|
|||
|
#define KEY_ON_OFF 0x8E // keycode = 0x007c
|
|||
|
|
|||
|
#define KEY_INSERT 0x90 // keycode = 0x004b
|
|||
|
#define KEY_DELETE 0x91 // keycode = 0x004c
|
|||
|
#define KEY_LEFT 0x92 // keycode = 0x004f
|
|||
|
#define KEY_HOME 0x93 // keycode = 0x0050
|
|||
|
#define KEY_END 0x94 // keycode = 0x0051
|
|||
|
#define KEY_UP 0x95 // keycode = 0x0053
|
|||
|
#define KEY_DOWN 0x96 // keycode = 0x0054
|
|||
|
#define KEY_PAGE_UP 0x97 // keycode = 0x0055
|
|||
|
#define KEY_PAGE_DOWN 0x98 // keycode = 0x0056
|
|||
|
#define KEY_RIGHT 0x99 // keycode = 0x0059
|
|||
|
#define KEY_MOUSE_1 0x9E // keycode = 0x0400
|
|||
|
#define KEY_MOUSE_2 0x9F // keycode = 0x0800
|
|||
|
|
|||
|
static uint_fast8_t
|
|||
|
get_fdc_key (uint_fast16_t cmd)
|
|||
|
{
|
|||
|
static uint8_t key_table[128] =
|
|||
|
{
|
|||
|
// 0 1 2 3 4 5 6 7 8 9 A B C D E F
|
|||
|
0, '^', '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', 0xDF, '<EFBFBD>', 0, '\b',
|
|||
|
'\t', 'q', 'w', 'e', 'r', 't', 'z', 'u', 'i', 'o', 'p', 0xFC, '+', 0, 0, 'a',
|
|||
|
's', 'd', 'f', 'g', 'h', 'j', 'k', 'l', 0xF6, 0xE4, '#', '\r', 0, '<', 'y', 'x',
|
|||
|
'c', 'v', 'b', 'n', 'm', ',', '.', '-', 0, 0, 0, 0, 0, ' ', 0, 0,
|
|||
|
|
|||
|
0, '<EFBFBD>', '!', '"', '<EFBFBD>', '$', '%', '&', '/', '(', ')', '=', '?', '`', 0, '\b',
|
|||
|
'\t', 'Q', 'W', 'E', 'R', 'T', 'Z', 'U', 'I', 'O', 'P', 0xDC, '*', 0, 0, 'A',
|
|||
|
'S', 'D', 'F', 'G', 'H', 'J', 'K', 'L', 0xD6, 0xC4, '\'', '\r', 0, '>', 'Y', 'X',
|
|||
|
'C', 'V', 'B', 'N', 'M', ';', ':', '_', 0, 0, 0, 0, 0, ' ', 0, 0
|
|||
|
};
|
|||
|
static uint_fast8_t state;
|
|||
|
|
|||
|
uint_fast8_t key = 0;
|
|||
|
|
|||
|
switch (cmd)
|
|||
|
{
|
|||
|
case 0x002C: state |= STATE_LEFT_SHIFT; break; // pressed left shift
|
|||
|
case 0x00AC: state &= ~STATE_LEFT_SHIFT; break; // released left shift
|
|||
|
case 0x0039: state |= STATE_RIGHT_SHIFT; break; // pressed right shift
|
|||
|
case 0x00B9: state &= ~STATE_RIGHT_SHIFT; break; // released right shift
|
|||
|
case 0x003A: state |= STATE_LEFT_CTRL; break; // pressed left ctrl
|
|||
|
case 0x00BA: state &= ~STATE_LEFT_CTRL; break; // released left ctrl
|
|||
|
case 0x003C: state |= STATE_LEFT_ALT; break; // pressed left alt
|
|||
|
case 0x00BC: state &= ~STATE_LEFT_ALT; break; // released left alt
|
|||
|
case 0x003E: state |= STATE_RIGHT_ALT; break; // pressed left alt
|
|||
|
case 0x00BE: state &= ~STATE_RIGHT_ALT; break; // released left alt
|
|||
|
|
|||
|
case 0x006e: key = KEY_ESCAPE; break;
|
|||
|
case 0x004b: key = KEY_INSERT; break;
|
|||
|
case 0x004c: key = KEY_DELETE; break;
|
|||
|
case 0x004f: key = KEY_LEFT; break;
|
|||
|
case 0x0050: key = KEY_HOME; break;
|
|||
|
case 0x0051: key = KEY_END; break;
|
|||
|
case 0x0053: key = KEY_UP; break;
|
|||
|
case 0x0054: key = KEY_DOWN; break;
|
|||
|
case 0x0055: key = KEY_PAGE_UP; break;
|
|||
|
case 0x0056: key = KEY_PAGE_DOWN; break;
|
|||
|
case 0x0059: key = KEY_RIGHT; break;
|
|||
|
case 0x0400: key = KEY_MOUSE_1; break;
|
|||
|
case 0x0800: key = KEY_MOUSE_2; break;
|
|||
|
|
|||
|
default:
|
|||
|
{
|
|||
|
if (!(cmd & 0x80)) // pressed key
|
|||
|
{
|
|||
|
if (cmd >= 0x70 && cmd <= 0x7F) // function keys
|
|||
|
{
|
|||
|
key = cmd + 0x10; // 7x -> 8x
|
|||
|
}
|
|||
|
else if (cmd < 64) // key listed in key_table
|
|||
|
{
|
|||
|
if (state & (STATE_LEFT_ALT | STATE_RIGHT_ALT))
|
|||
|
{
|
|||
|
switch (cmd)
|
|||
|
{
|
|||
|
case 0x0003: key = 0xB2; break; // upper 2
|
|||
|
case 0x0008: key = '{'; break;
|
|||
|
case 0x0009: key = '['; break;
|
|||
|
case 0x000A: key = ']'; break;
|
|||
|
case 0x000B: key = '}'; break;
|
|||
|
case 0x000C: key = '\\'; break;
|
|||
|
case 0x001C: key = '~'; break;
|
|||
|
case 0x002D: key = '|'; break;
|
|||
|
case 0x0034: key = 0xB5; break; // Mu
|
|||
|
}
|
|||
|
}
|
|||
|
else if (state & (STATE_LEFT_CTRL))
|
|||
|
{
|
|||
|
if (key_table[cmd] >= 'a' && key_table[cmd] <= 'z')
|
|||
|
{
|
|||
|
key = key_table[cmd] - 'a' + 1;
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
key = key_table[cmd];
|
|||
|
}
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
int idx = cmd + ((state & (STATE_LEFT_SHIFT | STATE_RIGHT_SHIFT)) ? 64 : 0);
|
|||
|
|
|||
|
if (key_table[idx])
|
|||
|
{
|
|||
|
key = key_table[idx];
|
|||
|
}
|
|||
|
}
|
|||
|
}
|
|||
|
}
|
|||
|
break;
|
|||
|
}
|
|||
|
}
|
|||
|
|
|||
|
return (key);
|
|||
|
}
|
|||
|
|
|||
|
static int analyze = FALSE;
|
|||
|
static int list = FALSE;
|
|||
|
static IRMP_DATA irmp_data;
|
|||
|
static int expected_protocol;
|
|||
|
static int expected_address;
|
|||
|
static int expected_command;
|
|||
|
static int do_check_expected_values;
|
|||
|
|
|||
|
static void
|
|||
|
next_tick (void)
|
|||
|
{
|
|||
|
if (! analyze && ! list)
|
|||
|
{
|
|||
|
(void) irmp_ISR ();
|
|||
|
|
|||
|
if (irmp_get_data (&irmp_data))
|
|||
|
{
|
|||
|
uint_fast8_t key;
|
|||
|
|
|||
|
ANALYZE_ONLY_NORMAL_PUTCHAR (' ');
|
|||
|
|
|||
|
if (verbose)
|
|||
|
{
|
|||
|
printf ("%8.3fms ", (double) (time_counter * 1000) / F_INTERRUPTS);
|
|||
|
}
|
|||
|
|
|||
|
if (irmp_data.protocol == IRMP_ACP24_PROTOCOL)
|
|||
|
{
|
|||
|
uint16_t temp = (irmp_data.command & 0x000F) + 15;
|
|||
|
|
|||
|
printf ("p=%2d (%s), a=0x%04x, c=0x%04x, f=0x%02x, temp=%d",
|
|||
|
irmp_data.protocol, irmp_protocol_names[irmp_data.protocol], irmp_data.address, irmp_data.command, irmp_data.flags, temp);
|
|||
|
}
|
|||
|
else if (irmp_data.protocol == IRMP_FDC_PROTOCOL && (key = get_fdc_key (irmp_data.command)) != 0)
|
|||
|
{
|
|||
|
if ((key >= 0x20 && key < 0x7F) || key >= 0xA0)
|
|||
|
{
|
|||
|
printf ("p=%2d (%s), a=0x%04x, c=0x%04x, f=0x%02x, asc=0x%02x, key='%c'",
|
|||
|
irmp_data.protocol, irmp_protocol_names[irmp_data.protocol], irmp_data.address, irmp_data.command, irmp_data.flags, key, key);
|
|||
|
}
|
|||
|
else if (key == '\r' || key == '\t' || key == KEY_ESCAPE || (key >= 0x80 && key <= 0x9F)) // function keys
|
|||
|
{
|
|||
|
char * p = (char *) NULL;
|
|||
|
|
|||
|
switch (key)
|
|||
|
{
|
|||
|
case '\t' : p = "TAB"; break;
|
|||
|
case '\r' : p = "CR"; break;
|
|||
|
case KEY_ESCAPE : p = "ESCAPE"; break;
|
|||
|
case KEY_MENUE : p = "MENUE"; break;
|
|||
|
case KEY_BACK : p = "BACK"; break;
|
|||
|
case KEY_FORWARD : p = "FORWARD"; break;
|
|||
|
case KEY_ADDRESS : p = "ADDRESS"; break;
|
|||
|
case KEY_WINDOW : p = "WINDOW"; break;
|
|||
|
case KEY_1ST_PAGE : p = "1ST_PAGE"; break;
|
|||
|
case KEY_STOP : p = "STOP"; break;
|
|||
|
case KEY_MAIL : p = "MAIL"; break;
|
|||
|
case KEY_FAVORITES : p = "FAVORITES"; break;
|
|||
|
case KEY_NEW_PAGE : p = "NEW_PAGE"; break;
|
|||
|
case KEY_SETUP : p = "SETUP"; break;
|
|||
|
case KEY_FONT : p = "FONT"; break;
|
|||
|
case KEY_PRINT : p = "PRINT"; break;
|
|||
|
case KEY_ON_OFF : p = "ON_OFF"; break;
|
|||
|
|
|||
|
case KEY_INSERT : p = "INSERT"; break;
|
|||
|
case KEY_DELETE : p = "DELETE"; break;
|
|||
|
case KEY_LEFT : p = "LEFT"; break;
|
|||
|
case KEY_HOME : p = "HOME"; break;
|
|||
|
case KEY_END : p = "END"; break;
|
|||
|
case KEY_UP : p = "UP"; break;
|
|||
|
case KEY_DOWN : p = "DOWN"; break;
|
|||
|
case KEY_PAGE_UP : p = "PAGE_UP"; break;
|
|||
|
case KEY_PAGE_DOWN : p = "PAGE_DOWN"; break;
|
|||
|
case KEY_RIGHT : p = "RIGHT"; break;
|
|||
|
case KEY_MOUSE_1 : p = "KEY_MOUSE_1"; break;
|
|||
|
case KEY_MOUSE_2 : p = "KEY_MOUSE_2"; break;
|
|||
|
default : p = "<UNKNWON>"; break;
|
|||
|
}
|
|||
|
|
|||
|
printf ("p=%2d (%s), a=0x%04x, c=0x%04x, f=0x%02x, asc=0x%02x, key=%s",
|
|||
|
irmp_data.protocol, irmp_protocol_names[irmp_data.protocol], irmp_data.address, irmp_data.command, irmp_data.flags, key, p);
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
printf ("p=%2d (%s), a=0x%04x, c=0x%04x, f=0x%02x, asc=0x%02x",
|
|||
|
irmp_data.protocol, irmp_protocol_names[irmp_data.protocol], irmp_data.address, irmp_data.command, irmp_data.flags, key);
|
|||
|
}
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
printf ("p=%2d (%s), a=0x%04x, c=0x%04x, f=0x%02x",
|
|||
|
irmp_data.protocol, irmp_protocol_names[irmp_data.protocol], irmp_data.address, irmp_data.command, irmp_data.flags);
|
|||
|
}
|
|||
|
|
|||
|
if (do_check_expected_values)
|
|||
|
{
|
|||
|
if (irmp_data.protocol != expected_protocol ||
|
|||
|
irmp_data.address != expected_address ||
|
|||
|
irmp_data.command != expected_command)
|
|||
|
{
|
|||
|
printf ("\nerror 7: expected values differ: p=%2d (%s), a=0x%04x, c=0x%04x\n",
|
|||
|
expected_protocol, irmp_protocol_names[expected_protocol], expected_address, expected_command);
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
printf (" checked!\n");
|
|||
|
}
|
|||
|
do_check_expected_values = FALSE; // only check 1st frame in a line!
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
putchar ('\n');
|
|||
|
}
|
|||
|
}
|
|||
|
}
|
|||
|
}
|
|||
|
|
|||
|
int
|
|||
|
main (int argc, char ** argv)
|
|||
|
{
|
|||
|
int i;
|
|||
|
int ch;
|
|||
|
int last_ch = 0;
|
|||
|
int pulse = 0;
|
|||
|
int pause = 0;
|
|||
|
|
|||
|
int start_pulses[256];
|
|||
|
int start_pauses[256];
|
|||
|
int pulses[256];
|
|||
|
int pauses[256];
|
|||
|
|
|||
|
int first_pulse = TRUE;
|
|||
|
int first_pause = TRUE;
|
|||
|
|
|||
|
if (argc == 2)
|
|||
|
{
|
|||
|
if (! strcmp (argv[1], "-v"))
|
|||
|
{
|
|||
|
verbose = TRUE;
|
|||
|
}
|
|||
|
else if (! strcmp (argv[1], "-l"))
|
|||
|
{
|
|||
|
list = TRUE;
|
|||
|
}
|
|||
|
else if (! strcmp (argv[1], "-a"))
|
|||
|
{
|
|||
|
analyze = TRUE;
|
|||
|
}
|
|||
|
else if (! strcmp (argv[1], "-s"))
|
|||
|
{
|
|||
|
silent = TRUE;
|
|||
|
}
|
|||
|
else if (! strcmp (argv[1], "-r"))
|
|||
|
{
|
|||
|
radio = TRUE;
|
|||
|
}
|
|||
|
}
|
|||
|
|
|||
|
for (i = 0; i < 256; i++)
|
|||
|
{
|
|||
|
start_pulses[i] = 0;
|
|||
|
start_pauses[i] = 0;
|
|||
|
pulses[i] = 0;
|
|||
|
pauses[i] = 0;
|
|||
|
}
|
|||
|
|
|||
|
IRMP_PIN = 0xFF;
|
|||
|
|
|||
|
while ((ch = getchar ()) != EOF)
|
|||
|
{
|
|||
|
if (ch == '_' || ch == '0')
|
|||
|
{
|
|||
|
if (last_ch != ch)
|
|||
|
{
|
|||
|
if (pause > 0)
|
|||
|
{
|
|||
|
if (list)
|
|||
|
{
|
|||
|
printf ("pause: %d\n", pause);
|
|||
|
}
|
|||
|
|
|||
|
if (analyze)
|
|||
|
{
|
|||
|
if (first_pause)
|
|||
|
{
|
|||
|
if (pause < 256)
|
|||
|
{
|
|||
|
start_pauses[pause]++;
|
|||
|
}
|
|||
|
first_pause = FALSE;
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
if (pause < 256)
|
|||
|
{
|
|||
|
pauses[pause]++;
|
|||
|
}
|
|||
|
}
|
|||
|
}
|
|||
|
}
|
|||
|
pause = 0;
|
|||
|
}
|
|||
|
pulse++;
|
|||
|
IRMP_PIN = 0x00;
|
|||
|
}
|
|||
|
else if (ch == 0xaf || ch == '-' || ch == '1')
|
|||
|
{
|
|||
|
if (last_ch != ch)
|
|||
|
{
|
|||
|
if (list)
|
|||
|
{
|
|||
|
printf ("pulse: %d ", pulse);
|
|||
|
}
|
|||
|
|
|||
|
if (analyze)
|
|||
|
{
|
|||
|
if (first_pulse)
|
|||
|
{
|
|||
|
if (pulse < 256)
|
|||
|
{
|
|||
|
start_pulses[pulse]++;
|
|||
|
}
|
|||
|
first_pulse = FALSE;
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
if (pulse < 256)
|
|||
|
{
|
|||
|
pulses[pulse]++;
|
|||
|
}
|
|||
|
}
|
|||
|
}
|
|||
|
pulse = 0;
|
|||
|
}
|
|||
|
|
|||
|
pause++;
|
|||
|
IRMP_PIN = 0xff;
|
|||
|
}
|
|||
|
else if (ch == '\n')
|
|||
|
{
|
|||
|
IRMP_PIN = 0xff;
|
|||
|
time_counter = 0;
|
|||
|
|
|||
|
if (list && pause > 0)
|
|||
|
{
|
|||
|
printf ("pause: %d\n", pause);
|
|||
|
}
|
|||
|
pause = 0;
|
|||
|
|
|||
|
if (! analyze)
|
|||
|
{
|
|||
|
for (i = 0; i < (int) ((10000.0 * F_INTERRUPTS) / 10000); i++) // newline: long pause of 10000 msec
|
|||
|
{
|
|||
|
next_tick ();
|
|||
|
}
|
|||
|
}
|
|||
|
first_pulse = TRUE;
|
|||
|
first_pause = TRUE;
|
|||
|
}
|
|||
|
else if (ch == '#')
|
|||
|
{
|
|||
|
time_counter = 0;
|
|||
|
|
|||
|
if (analyze)
|
|||
|
{
|
|||
|
while ((ch = getchar()) != '\n' && ch != EOF)
|
|||
|
{
|
|||
|
;
|
|||
|
}
|
|||
|
}
|
|||
|
else
|
|||
|
{
|
|||
|
char buf[1024];
|
|||
|
char * p;
|
|||
|
int idx = -1;
|
|||
|
|
|||
|
puts ("----------------------------------------------------------------------");
|
|||
|
putchar (ch);
|
|||
|
|
|||
|
|
|||
|
while ((ch = getchar()) != '\n' && ch != EOF)
|
|||
|
{
|
|||
|
if (ch != '\r') // ignore CR in DOS/Windows files
|
|||
|
{
|
|||
|
if (ch == '[' && idx == -1)
|
|||
|
{
|
|||
|
idx = 0;
|
|||
|
}
|
|||
|
else if (idx >= 0)
|
|||
|
{
|
|||
|
if (ch == ']')
|
|||
|
{
|
|||
|
do_check_expected_values = FALSE;
|
|||
|
buf[idx] = '\0';
|
|||
|
idx = -1;
|
|||
|
|
|||
|
expected_protocol = atoi (buf);
|
|||
|
|
|||
|
if (expected_protocol > 0)
|
|||
|
{
|
|||
|
p = buf;
|
|||
|
while (*p)
|
|||
|
{
|
|||
|
if (*p == 'x')
|
|||
|
{
|
|||
|
p++;
|
|||
|
|
|||
|
if (sscanf (p, "%x", &expected_address) == 1)
|
|||
|
{
|
|||
|
do_check_expected_values = TRUE;
|
|||
|
}
|
|||
|
break;
|
|||
|
}
|
|||
|
p++;
|
|||
|
}
|
|||
|
|
|||
|
if (do_check_expected_values)
|
|||
|
{
|
|||
|
do_check_expected_values = FALSE;
|
|||
|
|
|||
|
while (*p)
|
|||
|
{
|
|||
|
if (*p == 'x')
|
|||
|
{
|
|||
|
p++;
|
|||
|
|
|||
|
if (sscanf (p, "%x", &expected_command) == 1)
|
|||
|
{
|
|||
|
do_check_expected_values = TRUE;
|
|||
|
}
|
|||
|
break;
|
|||
|
}
|
|||
|
p++;
|
|||
|
}
|
|||
|
|
|||
|
if (do_check_expected_values)
|
|||
|
{
|
|||
|
// printf ("!%2d %04x %04x!\n", expected_protocol, expected_address, expected_command);
|
|||
|
}
|
|||
|
}
|
|||
|
}
|
|||
|
}
|
|||
|
else if (idx < 1024 - 2)
|
|||
|
{
|
|||
|
buf[idx++] = ch;
|
|||
|
}
|
|||
|
}
|
|||
|
putchar (ch);
|
|||
|
}
|
|||
|
}
|
|||
|
putchar ('\n');
|
|||
|
}
|
|||
|
|
|||
|
}
|
|||
|
|
|||
|
last_ch = ch;
|
|||
|
|
|||
|
next_tick ();
|
|||
|
}
|
|||
|
|
|||
|
if (analyze)
|
|||
|
{
|
|||
|
print_spectrum ("START PULSES", start_pulses, TRUE);
|
|||
|
print_spectrum ("START PAUSES", start_pauses, FALSE);
|
|||
|
print_spectrum ("PULSES", pulses, TRUE);
|
|||
|
print_spectrum ("PAUSES", pauses, FALSE);
|
|||
|
puts ("-----------------------------------------------------------------------------");
|
|||
|
}
|
|||
|
return 0;
|
|||
|
}
|
|||
|
|
|||
|
#endif // ANALYZE
|