esp-open-rtos/extras/sntp/sntp.h

77 lines
2.3 KiB
C
Raw Permalink Normal View History

2016-03-09 16:18:51 +00:00
/************************************************************************//**
* RTC time keeping and synchronization using SNTP for esp-open-rtos.
* Uses SNTP lwIP contribution.
*
* 2016, Jesus Alonso (doragasu)
****************************************************************************/
#ifndef _SNTP_H_
#define _SNTP_H_
#include <stdint.h>
#include <sys/time.h>
2016-03-09 16:18:51 +00:00
#include <time.h>
/*
* Function used by lwIP sntp module to update the date/time,
* with microseconds resolution.
*/
2016-03-09 16:18:51 +00:00
#define SNTP_SET_SYSTEM_TIME_US(sec, us) sntp_update_rtc(sec, us)
/*
* For the lwIP implementation of SNTP to allow using names for NTP servers.
*/
2016-03-09 16:18:51 +00:00
#define SNTP_SERVER_DNS 1
/*
* Number of supported NTP servers
*/
2016-03-09 16:18:51 +00:00
#define SNTP_NUM_SERVERS_SUPPORTED 4
/*
* Initialize the module, and start requesting SNTP updates. This function
* must be called only once.
* WARNING: tz->tz_dsttime doesn't have the same meaning as the standard
* implementation. If it is set to 1, a dst hour will be applied. If set
* to zero, time will not be modified.
*/
void sntp_initialize(const struct timezone *tz);
2016-03-09 16:18:51 +00:00
/*
* Sets time zone. Allowed values are in the range [-11, 13].
* NOTE: Settings do not take effect until SNTP time is updated. It is
* recommended to set these parameters only during initialization.
* WARNING: tz->tz_dsttime doesn't have the same meaning as the standard
* implementation. If it is set to 1, a dst hour will be applied. If set
* to zero, time will not be modified.
*/
void sntp_set_timezone(const struct timezone *tz);
2016-03-09 16:18:51 +00:00
/*
* Set SNTP servers. Up to SNTP_NUM_SERVERS_SUPPORTED can be set.
* Returns 0 if OK, less than 0 if error.
* NOTE: This function must NOT be called before sntp_initialize().
*/
2016-03-09 16:18:51 +00:00
int sntp_set_servers(char *server_url[], int num_servers);
/*
* Sets the update delay in ms. If requested value is less than 15s,
* a 15s update interval will be set.
*/
2016-03-09 16:18:51 +00:00
void sntp_set_update_delay(uint32_t ms);
/*
* Returns the time read from RTC counter, in seconds from Epoch. If
* us is not null, it will be filled with the microseconds.
*/
time_t sntp_get_rtc_time(int32_t *us);
/*
* Update RTC timer. This function is called by the SNTP module each time
* an SNTP update is received.
*/
void sntp_update_rtc(time_t t, uint32_t us);
2016-03-09 16:18:51 +00:00
#endif /* _SNTP_H_ */