RTL8710_DOC/ProgrammingRTL8710.md

Programming the RTL8710 via DAP

Hardware

• a RTL8710 RTL00.
• a DAP board with NXP LPC11U35FHI33/501.
• some wires.
• a usb cable

Prepare DAP board

• I use TG-LPC11U35-501. (https://developer.mbed.org/platforms/TG-LPC11U35-501/)
• Download Realtek's DAP firmware. (https://github.com/Ameba8195/Arduino/blob/master/misc/dap_firmware/DAP_FW_Ameba_V10_2_3-2M.bin)
• Program DAP firmware to DAP board.

Wiring

DAP board	RTL8710 RTL00
SWCLK	4
SWIO	6
3.3V	8
GND	15

Programming

• Connect the PC and the board with a USB cable
• The mbed drive is displayed on the PC.
• Copy ram_all.bin to the mbed drive.
• reboot RTL8710.

List of DAP board with LPC11U35FHI33/501.

• Realtek Ameba dev board ( require pattern cut to original ameba module.)
• B&T RTL8710 debug board
• TG-LPC11U35-501. (https://developer.mbed.org/platforms/TG-LPC11U35-501/)

Remark

• You can programming the RTL8710 via J-Link and other CMSIS DAP, but you don't erase MAC address and WLAN calibration data in 0x9000 - 0xAFFF.
• Realtek's DAP firmeware prevents to erase 0x9000 - 0xAFFF.