# Makefile.in generated by automake 1.8.5 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_triplet = @host@
subdir = doc
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in texinfo.tex
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/aclocal-include.m4 \
	$(top_srcdir)/m4/attribute.m4 $(top_srcdir)/m4/gettext.m4 \
	$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
	$(top_srcdir)/m4/lzo.m4 $(top_srcdir)/m4/malloc.m4 \
	$(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/openssl.m4 \
	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
	$(top_srcdir)/m4/realloc.m4 $(top_srcdir)/m4/tuntap.m4 \
	$(top_srcdir)/m4/zlib.m4 $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
INFO_DEPS = tinc.info
am__TEXINFO_TEX_DIR = $(srcdir)
DVIS = tinc.dvi
PDFS = tinc.pdf
PSS = tinc.ps
HTMLS = tinc.html
TEXINFOS = tinc.texi
TEXI2DVI = texi2dvi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
DVIPS = dvips
am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(man8dir)"
man5dir = $(mandir)/man5
man8dir = $(mandir)/man8
NROFF = nroff
MANS = $(man_MANS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

# Use `ginstall' in the definition of man_MANS to avoid
# confusion with the `install' target.  The install rule transforms `ginstall'
# to install before applying any user-specified name transformations.
transform = s/ginstall/install/; @program_transform_name@
ACLOCAL = @ACLOCAL@
ALLOCA = @ALLOCA@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
GMSGFMT = @GMSGFMT@
HAVE_TUNTAP = @HAVE_TUNTAP@
INCLUDES = @INCLUDES@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLLIBS = @INTLLIBS@
LDFLAGS = @LDFLAGS@
LIBICONV = @LIBICONV@
LIBINTL = @LIBINTL@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LINUX_IF_TUN_H = @LINUX_IF_TUN_H@
LN_S = @LN_S@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
MAKEINFO = @MAKEINFO@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
MSGMERGE = @MSGMERGE@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
POSUB = @POSUB@
RANLIB = @RANLIB@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
XGETTEXT = @XGETTEXT@
ac_ct_CC = @ac_ct_CC@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
datadir = @datadir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
prefix = @prefix@
program_transform_name = @program_transform_name@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
info_TEXINFOS = tinc.texi
man_MANS = tincd.8 tinc.conf.5
EXTRA_DIST = tincinclude.texi.in tincd.8.in tinc.conf.5.in sample-config.tar.gz
CLEANFILES = *.html tinc.info tincd.8 tinc.conf.5 tincinclude.texi
substitute = sed \
	-e s,'@PACKAGE\@',"$(PACKAGE)",g \
	-e s,'@VERSION\@',"$(VERSION)",g \
	-e s,'@sysconfdir\@',"$(sysconfdir)",g \
	-e s,'@localstatedir\@',"$(localstatedir)",g

all: all-am

.SUFFIXES:
.SUFFIXES: .dvi .ps
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  doc/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

tinc.info: tinc.texi 
	restore=: && \
	backupdir="$(am__leading_dot)am$$$$" && \
	rm -rf $$backupdir && mkdir $$backupdir && \
	for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
	  if test -f $$f; then \
	    mv $$f $$backupdir; \
	    restore=mv; \
	  fi; \
	done; \
	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $@ `test -f 'tinc.texi' || echo '$(srcdir)/'`tinc.texi; \
	then \
	  rc=0; \
	else \
	  rc=$$?; \
	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
	fi; \
	rm -rf $$backupdir; \
	exit $$rc

tinc.dvi: tinc.texi  
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2DVI) -o $@ `test -f 'tinc.texi' || echo '$(srcdir)/'`tinc.texi

tinc.pdf: tinc.texi  
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2PDF) -o $@ `test -f 'tinc.texi' || echo '$(srcdir)/'`tinc.texi

tinc.html: tinc.texi  
	$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $@ `test -f 'tinc.texi' || echo '$(srcdir)/'`tinc.texi
	if test ! -d $@ && test -d $(@:.html=); then \
	  mv $(@:.html=) $@; else :; fi
.dvi.ps:
	$(DVIPS) -o $@ $<

uninstall-info-am:
	$(PRE_UNINSTALL)
	@if (install-info --version && \
	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
	    install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
	  done; \
	else :; fi
	@$(NORMAL_UNINSTALL)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
	  (if cd "$(DESTDIR)$(infodir)"; then \
	     echo " rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9])"; \
	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
	   else :; fi); \
	done

dist-info: $(INFO_DEPS)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; \
	for base in $$list; do \
	  case $$base in \
	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
	  for file in $$d/$$base*; do \
	    relfile=`expr "$$file" : "$$d/\(.*\)"`; \
	    test -f $(distdir)/$$relfile || \
	      cp -p $$file $(distdir)/$$relfile; \
	  done; \
	done

mostlyclean-aminfo:
	-rm -rf tinc.aux tinc.cp tinc.cps tinc.fn tinc.fns tinc.ky tinc.kys tinc.log \
	  tinc.pg tinc.pgs tinc.tmp tinc.toc tinc.tp tinc.tps tinc.vr \
	  tinc.vrs tinc.dvi tinc.pdf tinc.ps tinc.html

maintainer-clean-aminfo:
	@list='$(INFO_DEPS)'; for i in $$list; do \
	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
	done
install-man5: $(man5_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	test -z "$(man5dir)" || $(mkdir_p) "$(DESTDIR)$(man5dir)"
	@list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.5*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    5*) ;; \
	    *) ext='5' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \
	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst"; \
	done
uninstall-man5:
	@$(NORMAL_UNINSTALL)
	@list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.5*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    5*) ;; \
	    *) ext='5' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f '$(DESTDIR)$(man5dir)/$$inst'"; \
	  rm -f "$(DESTDIR)$(man5dir)/$$inst"; \
	done
install-man8: $(man8_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	test -z "$(man8dir)" || $(mkdir_p) "$(DESTDIR)$(man8dir)"
	@list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.8*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    8*) ;; \
	    *) ext='8' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst"; \
	done
uninstall-man8:
	@$(NORMAL_UNINSTALL)
	@list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.8*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    8*) ;; \
	    *) ext='8' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f '$(DESTDIR)$(man8dir)/$$inst'"; \
	  rm -f "$(DESTDIR)$(man8dir)/$$inst"; \
	done
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkdir_p) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-info
check-am: all-am
check: check-am
all-am: Makefile $(INFO_DEPS) $(MANS)
installdirs:
	for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(man8dir)"; do \
	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am: $(DVIS)

html: html-am

html-am: $(HTMLS)

info: info-am

info-am: $(INFO_DEPS)

install-data-am: install-info-am install-man

install-exec-am:

install-info: install-info-am

install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	test -z "$(infodir)" || $(mkdir_p) "$(DESTDIR)$(infodir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
                       $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
	    if test -f $$ifile; then \
	      relfile=`echo "$$ifile" | sed 's|^.*/||'`; \
	      echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \
	      $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \
	    else : ; fi; \
	  done; \
	done
	@$(POST_INSTALL)
	@if (install-info --version && \
	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
	  done; \
	else : ; fi
install-man: install-man5 install-man8

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
	maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-aminfo mostlyclean-generic

pdf: pdf-am

pdf-am: $(PDFS)

ps: ps-am

ps-am: $(PSS)

uninstall-am: uninstall-info-am uninstall-man

uninstall-man: uninstall-man5 uninstall-man8

.PHONY: all all-am check check-am clean clean-generic dist-info \
	distclean distclean-generic distdir dvi dvi-am html html-am \
	info info-am install install-am install-data install-data-am \
	install-exec install-exec-am install-info install-info-am \
	install-man install-man5 install-man8 install-strip \
	installcheck installcheck-am installdirs maintainer-clean \
	maintainer-clean-aminfo maintainer-clean-generic mostlyclean \
	mostlyclean-aminfo mostlyclean-generic pdf pdf-am ps ps-am \
	uninstall uninstall-am uninstall-info-am uninstall-man \
	uninstall-man5 uninstall-man8


# For additional rules usually of interest only to the maintainer,
# see GNUmakefile and Makefile.maint.

sample-config.tar.gz: sample-config
	GZIP=$(GZIP_ENV) $(AMTAR) chozf sample-config.tar.gz --exclude .svn sample-config

texi2html: tinc.texi
	texi2html -split=chapter tinc.texi

%.html: $(man_MANS)
	w3mman2html $< > $@

tincd.8: tincd.8.in
	$(substitute) tincd.8.in > tincd.8

tinc.conf.5: tinc.conf.5.in
	$(substitute) tinc.conf.5.in > tinc.conf.5

tincinclude.texi: tincinclude.texi.in
	$(substitute) tincinclude.texi.in > tincinclude.texi

tinc.texi: tincinclude.texi
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: