Import Debian changes 1.1~pre8-2

tinc (1.1~pre8-2) experimental; urgency=low

  * Run make clean after the configure step to get rid of .o files that were
    accidentily left in the orig.tar.gz.

debian/NEWS

@@ -0,0 +1,11 @@
+tinc (1.1~pre2-1) experimental; urgency=low
+
+   tinc-1.1 has separate control utility, tincctl, which is now used
+   to start/stop tinc instances, to reload configuration, to get
+   various information about running tincd (including dump of nodes
+   and connections) and so on.  tincd still reacts to some signals
+   as before, but this usage is deprecated.  In particular, -k
+   option is now gone.  Also, node/connection/etc dumps are
+   produced on tincctl stdout, not into syslog.
+
+ -- Michael Tokarev <mjt@tls.msk.ru>  Sun, 07 Aug 2011 13:16:17 +0400

debian/README.Debian

@@ -0,0 +1,41 @@
+tinc for Debian
+----------------------
+
+The manual for tinc is also available as info pages, type `info tinc'
+to read it.
+
+The system startup script for tinc, /etc/init.d/tinc, uses the file
+/etc/tinc/nets.boot to find out which networks have to be started.
+
+Alternatively, you can create a stanza in /etc/network/interfaces, and add a
+line with "tinc-net <netname>". This will cause a tincd to be started which
+uses the configuration from /etc/tinc/<netname>. You can use an inet static
+(with address and netmask options) or inet dhcp stanza, in which case the ifup
+will configure the VPN interface and you do not need to have a tinc-up script.
+
+The following options are also recognized and map directly to the corresponding
+command line options for tincd:
+
+tinc-config <directory>
+tinc-debug <level>
+tinc-mlock yes
+tinc-logfile <filename>
+tinc-chroot yes
+tinc-user <username>
+
+An example stanza:
+
+iface vpn inet static
+	address 192.168.2.42
+	netmask 255.255.0.0
+	tinc-net myvpn
+	tinc-debug 1
+	tinc-mlock yes
+	tinc-user nobody
+
+This will start a tinc daemon that reads its configuration from
+/etc/tinc/myvpn, logs at debug level 1, locks itself in RAM, runs as user
+nobody, and creates a network interface called "vpn". Ifup then sets the
+address and netmask on that interface.
+
+ -- Guus Sliepen <guus@debian.org>, Fri, 24 June 2011, 18:10:53 +0200

debian/changelog

@@ -0,0 +1,586 @@
+tinc (1.1~pre8-2) experimental; urgency=low
+
+  * Run make clean after the configure step to get rid of .o files that were
+    accidentily left in the orig.tar.gz.
+
+ -- Guus Sliepen <guus@debian.org>  Wed, 14 Aug 2013 16:13:43 +0200
+
+tinc (1.1~pre8-1) experimental; urgency=low
+
+  * New upstream release.
+    - Handles whitespace between command line flags and optional arguments.
+      Closes: #710267
+  * Bump Standards-Version.
+  * Source /lib/lsb/init-functions in the init.d script.
+  * Don't use texi2html anymore, use automake's install-html target which uses
+    makeinfo.
+
+ -- Guus Sliepen <guus@debian.org>  Wed, 14 Aug 2013 15:34:41 +0200
+
+tinc (1.1~pre7-2) experimental; urgency=low
+
+  [ Gian Piero Carrubba ]
+  * Init script fails to pass extra arguments to tincd. Closes: #704701
+    + Remove the '--' as it is passed unaltered to tincd, preventing it to read
+      trailing parameters.
+    + Pass extra arguments also when restarting the daemon.
+  * Set process limits when started by ifupdown. Closes: #704702
+
+  [ Guus Sliepen ]
+  * Check whether the tincd process is still running in the if-post-down script.
+    Closes: #704708
+
+ -- Guus Sliepen <guus@debian.org>  Wed, 01 May 2013 10:41:31 +0200
+
+tinc (1.1~pre7-1) experimental; urgency=high
+
+  * New upstream release.
+    - Drop packets forwarded via TCP if they are too big (CVE-2013-1428).
+
+ -- Guus Sliepen <guus@debian.org>  Tue, 23 Apr 2013 11:37:38 +0200
+
+tinc (1.1~pre6-1) experimental; urgency=low
+
+  * New upstream release.
+
+ -- Guus Sliepen <guus@debian.org>  Wed, 20 Feb 2013 16:53:33 +0100
+
+tinc (1.1~pre4-1) experimental; urgency=low
+
+  [ Gian Piero Carrubba ]
+  * Allow resource limits to be set in /etc/default/tinc. Closes: #690685
+
+  [ Guus Sliepen ]
+  * New upstream release.
+
+ -- Guus Sliepen <guus@debian.org>  Wed, 05 Dec 2012 23:05:01 +0100
+
+tinc (1.1~pre3-1) experimental; urgency=low
+
+  * New upstream release.
+  * Bump Standards-Version.
+  * Enable parallel builds.
+  * Bump debian/compat to 9, so tinc gets build with hardening flags.
+  * Move tinc-gui to its own package.
+
+ -- Guus Sliepen <guus@debian.org>  Sun, 14 Oct 2012 23:51:21 +0200
+
+tinc (1.1~pre2-2) experimental; urgency=low
+
+  * add forgotten build-depend on libncurses5-dev for new `tincctl top'
+  * add libevent-dev build dependency
+  * remove build dependency on gettext
+
+ -- Michael Tokarev <mjt@tls.msk.ru>  Sun, 07 Aug 2011 17:32:39 +0400
+
+tinc (1.1~pre2-1) experimental; urgency=low
+
+  * first cut of 1.1-tobe.
+    Rewrote control scripts et al to use tincctl.
+  * build-depend on libssl >>1.0.0 to get proper EC support
+  * remove crypto-related symlinks from src/ in clean --
+    probably should go into upstream makefile instead
+
+ -- Michael Tokarev <mjt@tls.msk.ru>  Sun, 07 Aug 2011 12:57:15 +0400
+
+tinc (1.0.19-2) unstable; urgency=low
+
+  * Fix behaviour of tinc-pidfile. Closes: #679130
+  * Enable parallel building in debian/rules.
+
+ -- Guus Sliepen <guus@debian.org>  Tue, 26 Jun 2012 18:28:34 +0200
+
+tinc (1.0.19-1) unstable; urgency=low
+
+  * New upstream release.
+  * Bump debian/compat so tinc gets built with hardening flags.
+  * Allow tinc-pidfile in /etc/network/interfaces.
+
+ -- Guus Sliepen <guus@debian.org>  Mon, 25 Jun 2012 20:29:22 +0200
+
+tinc (1.0.18-1) unstable; urgency=low
+
+  * New upstream release.
+
+ -- Guus Sliepen <guus@debian.org>  Sun, 25 Mar 2012 18:52:15 +0200
+
+tinc (1.0.17-1) unstable; urgency=low
+
+  * New upstream release.
+  * Enable support for UML and VDE.
+
+ -- Guus Sliepen <guus@debian.org>  Sat, 10 Mar 2012 14:50:00 +0100
+
+tinc (1.0.16-1) unstable; urgency=low
+
+  * New upstream release.
+  * Mention alarm option in /etc/init.d/tinc's usage information.
+    Closes: #631761
+
+ -- Guus Sliepen <guus@debian.org>  Sat, 23 Jul 2011 14:37:56 +0200
+
+tinc (1.0.15-1) unstable; urgency=low
+
+  * New upstream release.
+  * Send SIGALRM to running tinc daemons whenever an interface is brought up
+    with the ifupdown framework. Based on a patch from Joachim Breitner.
+    Closes: #629880
+  * Allow tinc daemons to be started using ifupdown.
+
+ -- Guus Sliepen <guus@debian.org>  Fri, 24 Jun 2011 18:21:51 +0200
+
+tinc (1.0.14-1) unstable; urgency=low
+
+  * New upstream release.
+  * Bump Standards-Version.
+
+ -- Guus Sliepen <guus@debian.org>  Mon, 09 May 2011 00:25:37 +0200
+
+tinc (1.0.13-1) unstable; urgency=low
+
+  * New upstream release.
+
+ -- Guus Sliepen <guus@debian.org>  Tue, 13 Apr 2010 12:06:36 +0200
+
+tinc (1.0.12-2) unstable; urgency=low
+
+  * Remove debconf questions. Closes: #572116
+    Apparently debconf may not be used to ask a question at install time and
+    use the answer at upgrade time. Instead of kludging around this
+    restriction, no questions are asked anymore, and tinc will now always be
+    restarted when upgrading.
+  * Wait up to 5 seconds for tinc daemon to stop before restarting it.
+
+ -- Guus Sliepen <guus@debian.org>  Tue, 02 Mar 2010 14:01:36 +0100
+
+tinc (1.0.12-1) unstable; urgency=low
+
+  * New upstream release.
+  * Bump Standards-Version.
+  * Migrate from CDBS to debhelper.
+  * Convert source package to 3.0 (quilt) format.
+  * Remove useless tinc.modules.
+  * Use init.d script from Michael Tokarev, allowing per-network arguments to
+    tincd.
+  * Remove update-rc.d calls from postinst and postrm.
+  * Let the init.d script depend on $remote_fs.
+
+ -- Guus Sliepen <guus@debian.org>  Thu, 04 Feb 2010 00:56:45 +0100
+
+tinc (1.0.11-1) unstable; urgency=low
+
+  * New upstream release.
+  * Cope with texi2html arbitrarily changing its output directory.
+    Closes: #552927
+  * Do not stop tinc when configuring a new version, just restart after
+    the upgrade.
+
+ -- Guus Sliepen <guus@debian.org>  Sun, 01 Nov 2009 20:37:16 +0100
+
+tinc (1.0.10-1) unstable; urgency=low
+
+  * New upstream release.
+  * Include Russian debconf translation. Closes: #548759
+
+ -- Guus Sliepen <guus@debian.org>  Sun, 18 Oct 2009 16:31:49 +0200
+
+tinc (1.0.9-1) unstable; urgency=low
+
+  * New upstream release.
+    - Binds IPv6 sockets only to IPv6. Closes: #440150
+  * Update copyright file. Closes: #482566
+
+ -- Guus Sliepen <guus@debian.org>  Fri, 26 Dec 2008 13:25:05 +0100
+
+tinc (1.0.8-2) unstable; urgency=low
+
+  * Include Portugese debconf translation. Closes: #434191
+
+ -- Guus Sliepen <guus@debian.org>  Tue, 14 Aug 2007 13:50:27 +0200
+
+tinc (1.0.8-1) unstable; urgency=low
+
+  * New upstream release. Closes: #173987
+  * Include german debconf translation. Closes: #412351
+  * Build-Depend on texinfo. Closes: #424209
+
+ -- Guus Sliepen <guus@debian.org>  Wed, 16 May 2007 17:59:16 +0200
+
+tinc (1.0.7-1) unstable; urgency=low
+
+  * New upstream release.
+
+ -- Guus Sliepen <guus@debian.org>  Fri,  5 Jan 2007 15:55:42 +0100
+
+tinc (1.0.6-1) unstable; urgency=low
+
+  * New upstream release.
+
+ -- Guus Sliepen <guus@debian.org>  Mon, 18 Dec 2006 15:41:03 +0100
+
+tinc (1.0.5-1) unstable; urgency=low
+
+  * New upstream release. Closes: #391610
+  * Add an LSB section to the init script.
+
+ -- Guus Sliepen <guus@debian.org>  Tue, 14 Nov 2006 16:32:20 +0100
+
+tinc (1.0.4-4) unstable; urgency=low
+
+  * Include swedish debconf translation. Closes: #332963
+  * Remove nets.boot on purge. Closes: #333303
+
+ -- Guus Sliepen <guus@debian.org>  Mon, 17 Oct 2005 12:34:32 +0200
+
+tinc (1.0.4-3) unstable; urgency=low
+
+  * Depend on debconf | debconf-2.0.
+  * Include vietnamese debconf translation. Closes: #322305
+  * Include japanese debconf translation. Closes: #319591
+
+ -- Guus Sliepen <guus@debian.org>  Thu, 29 Sep 2005 11:15:34 +0200
+
+tinc (1.0.4-2) unstable; urgency=low
+
+  * Compensate for change in texinfo's output directory. Closes: #318562
+  * Include Czech translation of the debconf questions. Closes: #312982
+
+ -- Guus Sliepen <guus@debian.org>  Sat, 16 Jul 2005 11:42:04 +0200
+
+tinc (1.0.4-1) unstable; urgency=low
+
+  * New upstream release. Closes: #294819
+  * Update french translation of debconf template. Closes: #293371, #296148
+  * Allow dashes in nets.boot. Closes: #296281
+
+ -- Guus Sliepen <guus@debian.org>  Wed,  4 May 2005 21:56:22 +0200
+
+tinc (1.0.3-4) unstable; urgency=low
+
+  * Call debconf early in postinst so it won't get confused by output
+    from other commands in the postinst script. Closes: #292920
+  * If MAKEDEV doesn't know about net/tun, fall back to tun.
+
+ -- Guus Sliepen <guus@debian.org>  Mon, 31 Jan 2005 13:27:16 +0100
+
+tinc (1.0.3-3) unstable; urgency=low
+
+  * Fix clean rule in debian/rules.
+
+ -- Guus Sliepen <guus@debian.org>  Thu, 27 Jan 2005 23:16:59 +0000
+
+tinc (1.0.3-2) unstable; urgency=low
+
+  * Don't check for /dev/tap* in postinst if we don't create them anyway.
+  * MAKEDEV expects net/tun instead of tun.
+  * Don't ask if /dev/net/tun should be created, just do it.
+    Closes: #259489, #292450
+  * Move $EXTRA from init.d/tinc to /etc/default/tinc. Closes: #281366
+
+ -- Guus Sliepen <guus@debian.org>  Thu, 27 Jan 2005 14:10:02 +0100
+
+tinc (1.0.3-1) unstable; urgency=low
+
+  * New upstream release.
+  * Adopting the package from Ivo.
+  * Use invoke-rc.d, and tell user to do so as well. Closes: #223276
+  * Let force-reload do the same thing as reload. Closes: #230180
+
+ -- Guus Sliepen <guus@debian.org>  Fri,  1 Oct 2004 21:04:14 +0200
+
+tinc (1.0.2-2) unstable; urgency=low
+
+  * debian/control: Oops, really make that automake1.7.
+
+ -- Ivo Timmermans <ivo@debian.org>  Sat,  8 Nov 2003 21:53:04 +0100
+
+tinc (1.0.2-1) unstable; urgency=low
+
+  * New upstream release:
+      * Fix broken replies to CHAL_RESP.  (Closes: #217646)
+  * debian/control: Updated automake build dependency to automake1.7.
+    (Closes: #219360)
+
+ -- Ivo Timmermans <ivo@debian.org>  Sat,  8 Nov 2003 19:56:04 +0100
+
+tinc (1.0.1-2) unstable; urgency=low
+
+  * debian/dirs: Removed, moved contents to tinc.dirs.
+    (Closes: #208591)
+  * debian/docs: Renamed to tinc.docs.
+  * debian/rules: Install the contents of doc/sample-config.tar.gz in
+    /usr/share/doc/tinc/examples instead of /etc/tinc.
+  * debian/Makefile*: Removed.
+
+ -- Ivo Timmermans <ivo@debian.org>  Wed, 10 Sep 2003 12:19:32 +0200
+
+tinc (1.0.1-1) unstable; urgency=low
+
+  * New upstream release.
+  * debian/patches/001_openbsd_device.c.patch: Removed.
+
+ -- Ivo Timmermans <ivo@debian.org>  Thu, 14 Aug 2003 17:03:28 +0200
+
+tinc (1.0release-1) unstable; urgency=low
+
+  * New upstream version.  (Closes: #204639)
+      * Fixes switching back to normal logging mode when killing with
+        SIGINT twice.  (Closes: #175633)
+      * Uses one SSL context struct for each connection, speeding up
+        encrypting/decrypting data; don't throw away out of sequence
+        packets.  (Closes: #188874)
+      * Fixes handling of broadcast messages.  (Closes: #175632)
+  * debian/rules: Use cdbs.
+  * debian/control: Build-Depend on cdbs, liblzo-dev.
+  * debian/patches/001_openbsd_device.c.patch: Sync openbsd/device.c to
+    latest CVS version.
+
+ -- Ivo Timmermans <ivo@debian.org>  Sun, 10 Aug 2003 16:13:29 +0200
+
+tinc (1.0pre8-6) unstable; urgency=low
+
+  * debian/po/fr.po: Added French debconf translation.  (Closes: #201803)
+
+ -- Ivo Timmermans <ivo@debian.org>  Fri, 18 Jul 2003 10:03:20 +0200
+
+tinc (1.0pre8-5) unstable; urgency=low
+
+  * debian/*: Change to po-debconf, thanks to From: Michel Grentzinger
+    <mic.grentz@online.fr> for the patch:
+      - change debhelper dependency to 4.1.16 (according to man
+        po-debconf),
+      - manually add nl translation in old tinc.templates (master),
+      - run debconf-gettextize debian/tinc.templates,
+      - move old templates files (debian/tinc.templates.*),
+      - change construction "If you say no" to "If you refuse",
+  * debian/rules: Call po2debconf.
+  * debian/rules: Don't copy COPYING.README to the package.
+  * debian/control: Update Standards-Version.
+  * debian/conffiles: Removed.
+  * debian/postinst: No longer use mknod directly, use MAKEDEV.
+
+ -- Ivo Timmermans <ivo@debian.org>  Tue, 15 Jul 2003 20:13:47 +0200
+
+tinc (1.0pre8-4) unstable; urgency=low
+
+  * src/net.h, src/net_packet.c, src/net_setup.c: Apply fix from CVS
+    for OpenSSL-related memory leaks.  (Closes: #189432)
+
+ -- Ivo Timmermans <ivo@debian.org>  Mon,  5 May 2003 15:00:29 +0200
+
+tinc (1.0pre8-3) unstable; urgency=low
+
+  * m4/openssl.m4: Updated to CVS version.  (Closes: #184400)
+
+ -- Ivo Timmermans <ivo@debian.org>  Thu, 13 Mar 2003 17:24:42 +0100
+
+tinc (1.0pre8-2) unstable; urgency=low
+
+  * debian/postinst: Create /dev/net/tun if it doesn't exist.
+  * debian/tinc.modules: Add alias for /dev/net/tun.
+  * debian/rules: Install tinc.modules.
+  * These things together: (Closes: #151967, #153156)
+
+ -- Ivo Timmermans <ivo@debian.org>  Wed, 13 Nov 2002 22:45:38 +0100
+
+tinc (1.0pre8-1) unstable; urgency=low
+
+  * New upstream version.
+  * debian/rules:
+      - DEB_BUILD_OPTIONS support.
+      - Enable --enable-tracing by default.
+
+ -- Ivo Timmermans <ivo@debian.org>  Tue, 17 Sep 2002 13:50:44 +0200
+
+tinc (1.0pre7-3) unstable; urgency=low
+
+  * Properly install _all_ info pages. (Closes: #144718)
+
+ -- Ivo Timmermans <ivo@debian.org>  Wed, 29 May 2002 14:01:21 +0200
+
+tinc (1.0pre7-2) unstable; urgency=low
+
+  * Dutch translation wasn't being installed.
+
+ -- Ivo Timmermans <ivo@debian.org>  Thu, 11 Apr 2002 09:26:14 +0200
+
+tinc (1.0pre7-1) unstable; urgency=medium
+
+  * New upstream release.
+
+ -- Ivo Timmermans <ivo@debian.org>  Tue,  9 Apr 2002 16:04:46 +0200
+
+tinc (1.0pre6-3) unstable; urgency=medium
+
+  * Synched with upstream CVS.
+  * Added build dependency on zlib1g-dev. (Closes: #141705)
+
+ -- Ivo Timmermans <ivo@debian.org>  Mon,  8 Apr 2002 21:19:31 +0200
+
+tinc (1.0pre6-2) unstable; urgency=low
+
+  * The Section was non-US again, so changed it back to main/net.
+
+ -- Ivo Timmermans <ivo@debian.org>  Thu, 28 Mar 2002 07:26:10 +0100
+
+tinc (1.0pre6-1) unstable; urgency=low
+
+  * New upstream release.
+  * Fixed text in debian/copyright
+
+ -- Ivo Timmermans <ivo@debian.org>  Wed, 27 Mar 2002 23:10:07 +0100
+
+tinc (1.0pre5-4) unstable; urgency=low
+
+  * Added a debconf question for restarting on upgrade.
+  * Added reload option to init.d, start with EXTRA='-d' default.
+  * Moved from non-US to main.
+  * Install example configuration files.
+  * The HTML documentation wasn't installed; fixed.
+
+ -- Ivo Timmermans <ivo@debian.org>  Tue, 26 Mar 2002 20:14:19 +0100
+
+tinc (1.0pre5-3) unstable; urgency=low
+
+  * Config variables are now treated case sentitivly again.
+  * Added a forgotten xstrdup.
+
+ -- Ivo Timmermans <ivo@debian.org>  Fri, 15 Feb 2002 12:35:17 +0100
+
+tinc (1.0pre5-2) unstable; urgency=low
+
+  * MaxTimeout accidentally wasn't configurable. (Closes: #119653)
+
+ -- Ivo Timmermans <ivo@debian.org>  Wed, 13 Feb 2002 13:36:54 +0100
+
+tinc (1.0pre5-1) unstable; urgency=low
+
+  * New upstream version. (Closes: #119653)
+  * Init script redone in sh.
+
+ -- Ivo Timmermans <ivo@debian.org>  Sun, 10 Feb 2002 16:39:53 +0100
+
+tinc (1.0pre4-1.cvs010621.6) unstable; urgency=low
+
+  * Somehow po-Makefile.in.in.diff got lost, readded. (Closes: #119157)
+
+ -- Ivo Timmermans <ivo@debian.org>  Thu, 15 Nov 2001 17:00:03 +0100
+
+tinc (1.0pre4-1.cvs010621.5) unstable; urgency=low
+
+  * Fix a typo in postinst that let it MAKEDEV even on devfs.
+    (Closes: #116034)
+
+ -- Ivo Timmermans <ivo@debian.org>  Thu, 18 Oct 2001 09:35:16 +0200
+
+tinc (1.0pre4-1.cvs010621.4) unstable; urgency=low
+
+  * Ask before creating the device files. (Closes: #111099)
+  * Add a section to the info file.
+
+ -- Ivo Timmermans <ivo@debian.org>  Fri, 12 Oct 2001 20:47:09 +0200
+
+tinc (1.0pre4-1.cvs010621.3) unstable; urgency=low
+
+  * Build and install html documentation. (Closes: #106843)
+  * Remove build-time dependency on libc6-dev.
+
+ -- Ivo Timmermans <ivo@debian.org>  Mon, 30 Jul 2001 22:03:52 +0200
+
+tinc (1.0pre4-1.cvs010621.2) unstable; urgency=low
+
+  * Changed location of the pidfile. (Closes: #102798)
+
+ -- Ivo Timmermans <ivo@debian.org>  Sun,  1 Jul 2001 01:57:43 +0200
+
+tinc (1.0pre4-1.cvs010621.1) unstable; urgency=low
+
+  * New upstream version. (Closes: #98730)
+  * Rebuilding automatically inserted new config.{sub|guess}.
+    (Closes: #98165)
+  * Updated Standards-Version.
+  * Don't include a sample configuration file.
+
+ -- Ivo Timmermans <ivo@debian.org>  Thu, 21 Jun 2001 14:08:49 +0200
+
+tinc (1.0pre3-5) unstable; urgency=low
+
+  * Fixed an error in the init script that prevented tinc from
+    starting correctly.
+
+ -- Ivo Timmermans <ivo@debian.org>  Thu,  8 Feb 2001 02:45:09 +0100
+
+tinc (1.0pre3-4) unstable; urgency=low
+
+  * Change build-depends for OpenSSL to libssl096-dev
+    (Closes: #84197, #84873).
+
+ -- Ivo Timmermans <ivo@debian.org>  Sun,  4 Feb 2001 22:43:22 +0100
+
+tinc (1.0pre3-3) unstable; urgency=low
+
+  * Set architecture to any (really this time!) (Closes: #80451).
+  * Section set to non-US
+
+ -- Ivo Timmermans <ivo@debian.org>  Tue, 23 Jan 2001 22:52:53 +0100
+
+tinc (1.0pre3-2) unstable; urgency=low
+
+  * Set architecture to any (Closes: #80451).
+  * Added tinc.modules with some useful module aliases.
+
+ -- Ivo Timmermans <ivo@debian.org>  Sat, 13 Jan 2001 16:10:57 +0100
+
+tinc (1.0pre3-1) unstable; urgency=low
+
+  * New upstream version (1.0pre3) (Closes: #71274).
+  * Better Depends and Build-Depends lines.
+  * Dropped dependencies on libgmp, added libssl.
+  * doc-base.tinc: New file.
+  * Deleted the file shlibs, as there on longer is a libblowfish.
+  * Patch po/Makefile.in.in from po-Makefile.in.in.diff if necessary.
+  * Use dh_perl to get accurate perl dependencies.
+
+ -- Ivo Timmermans <ivo@debian.org>  Thu,  9 Nov 2000 21:58:40 +0100
+
+tinc (1.0pre2-1.1) unstable; urgency=low
+
+  * NMU at Ivo's request as his application is being processed, and his
+    sponsor is based in the US.
+
+ -- J.H.M. Dassen (Ray) <jdassen@debian.org>  Wed, 28 Jun 2000 21:52:30 +0200
+
+tinc (1.0pre2-1) unstable; urgency=low
+
+  * postinst creates a file /etc/tinc/nets.boot, containing all networks
+    to be started upon system startup;
+  * init.d script starts all networks from that list.
+  * postinst script creates tap devices.
+
+ -- Ivo Timmermans <itimmermans@bigfoot.com>  Tue, 16 May 2000 00:06:25 +0200
+
+tinc (1.0pre1-0.4) unstable; urgency=low
+
+  * postinst script.
+
+ -- Ivo Timmermans <itimmermans@bigfoot.com>  Mon, 15 May 2000 19:22:05 +0200
+
+tinc (1.0pre1-0.3) unstable; urgency=low
+
+  * system startup script.
+
+ -- Ivo Timmermans <itimmermans@bigfoot.com>  Sun, 14 May 2000 22:58:02 +0200
+  
+tinc (1.0pre1-0.2) unstable; urgency=low
+
+  * Included the blowfish license.
+
+ -- Ivo Timmermans <itimmermans@bigfoot.com>  Fri, 21 Apr 2000 17:07:50 +0200
+
+tinc (1.0pre1-0.1) unstable; urgency=low
+
+  * Initial Release.
+
+ -- Ivo Timmermans <itimmermans@bigfoot.com>  Fri, 21 Apr 2000 17:07:50 +0200
+
+

debian/compat

@@ -0,0 +1 @@
+9

debian/control

@@ -0,0 +1,28 @@
+Source: tinc
+Section: net
+Priority: optional
+Maintainer: Guus Sliepen <guus@debian.org>
+Standards-Version: 3.9.4
+Build-Depends: libssl-dev (>>1.0.0), debhelper (>= 9), texinfo, zlib1g-dev, liblzo2-dev, libncurses5-dev, libreadline-dev, libvdeplug-dev
+Homepage: http://www.tinc-vpn.org/
+
+Package: tinc
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: Virtual Private Network daemon
+ tinc is a daemon with which you can create a virtual private network
+ (VPN). One daemon can handle multiple connections, so you can
+ create an entire (moderately sized) VPN with only one daemon per
+ participating computer.
+
+Package: tinc-gui
+Architecture: all
+Depends: ${misc:Depends}, python, python-wxgtk2.8, tinc (>= 1.1~pre3-1)
+Description: graphical user interface for tinc
+ tinc is a daemon with which you can create a virtual private network
+ (VPN). One daemon can handle multiple connections, so you can
+ create an entire (moderately sized) VPN with only one daemon per
+ participating computer.
+ .
+ This package contains a GUI that can interact with a running tinc daemon,
+ showing the known nodes, edges and subnets of a VPN.

debian/copyright

@@ -0,0 +1,34 @@
+This package was debianized by Ivo Timmermans <ivo@debian.org> on
+Fri, 21 Apr 2000 17:07:50 +0200.
+
+It was downloaded from http://www.tinc-vpn.org/
+
+Upstream Authors:
+ Guus Sliepen <guus@tinc-vpn.org>
+ Ivo Timmermans <ivo@tinc-vpn.org>
+
+Copyright (C) 1998-2005 Ivo Timmermans
+              1998-2008 Guus Sliepen <guus@tinc-vpn.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+On Debian GNU/Linux systems, the complete text of the GNU General Public
+License version 2 can be found in /usr/share/common-licenses/GPL-2.
+
+The following applies to tinc:
+
+This program is released under the GPL with the additional exemption
+that compiling, linking, and/or using OpenSSL is allowed.  You may
+provide binary packages linked to the OpenSSL libraries, provided that
+all other requirements of the GPL are met.
+
+The following applies to the LZO library:
+
+Hereby I grant a special exception to the tinc VPN project
+(http://tinc.nl.linux.org/) to link the LZO library with the OpenSSL library
+(http://www.openssl.org).
+
+Markus F.X.J. Oberhumer

debian/doc-base.tinc

@@ -0,0 +1,10 @@
+Document: tinc
+Title: tinc Manual
+Author: Ivo Timmermans, Guus Sliepen
+Abstract: This manual describes how to set up a Virtual Private
+ Network with tinc.
+Section: System/Security
+
+Format: HTML
+Files: /usr/share/doc/tinc/tinc.html/*
+Index: /usr/share/doc/tinc/tinc.html/index.html

debian/info

@@ -0,0 +1 @@
+doc/tinc.info

debian/postinst

@@ -0,0 +1,30 @@
+#! /bin/sh
+
+NETSFILE="/etc/tinc/nets.boot"
+
+set -e
+
+case "$1" in
+    configure)
+	if [ ! -e /dev/.devfsd ] ; then if [ ! -e /dev/.devfs ] ; then
+		if [ ! -e /dev/net/tun ] ; then if [ ! -e /dev/tun ] ; then
+			echo "Creating tun device..."
+			cd /dev && ./MAKEDEV net/tun 2>/dev/null || ./MAKEDEV tun 2>/dev/null || echo "Failed to create tun device."
+		fi; fi
+	fi; fi
+
+	if [ ! -e $NETSFILE ] ; then
+	    echo "## This file contains all names of the networks to be started on system startup." > $NETSFILE
+	fi
+    ;;
+
+    abort-upgrade|abort-remove|abort-deconfigure)
+    ;;
+
+    *)
+        echo "postinst called with unknown argument \`$1'" >&2
+        exit 0
+    ;;
+esac
+
+#DEBHELPER#

debian/postrm

@@ -0,0 +1,9 @@
+#!/bin/sh
+
+set -e
+
+if [ "$1" = purge ]; then
+    rm -f /etc/tinc/nets.boot
+fi
+
+#DEBHELPER#

debian/rules

@@ -0,0 +1,27 @@
+#!/usr/bin/make -f
+# -*- makefile -*-
+# Sample debian/rules that uses debhelper.
+# This file was originally written by Joey Hess and Craig Small.
+# As a special exception, when this file is copied by dh-make into a
+# dh-make output file, you may use that output file without restriction.
+# This special exception was added by Craig Small in version 0.37 of dh-make.
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+#include /usr/share/dpkg/buildflags.mk
+
+%:
+	dh $@ --parallel
+
+override_dh_auto_configure:
+	dh_auto_configure -- --enable-uml --enable-vde
+	$(MAKE) clean
+
+override_dh_auto_install:
+	dh_auto_install -- install-html
+	# Remove info dir file
+	rm -f debian/tinc/usr/share/info/dir
+
+override_dh_installinit:
+	dh_installinit -R

debian/source/format

@@ -0,0 +1 @@
+3.0 (quilt)

debian/tinc-gui.install

@@ -0,0 +1,2 @@
+usr/bin/tinc-gui
+usr/share/man/man8/tinc-gui.*

debian/tinc.default

@@ -0,0 +1,7 @@
+# Extra options to be passed to tincd.
+# EXTRA="-d"
+
+# Limits to be configured for the tincd process. Please read your shell
+# (pointed by /bin/sh) documentation for ulimit. You probably want to raise the
+# max locked memory value if using both --mlock and --user flags.
+# LIMITS="-l 128"

debian/tinc.dirs

@@ -0,0 +1,6 @@
+usr/sbin
+usr/share
+etc
+etc/init.d
+usr/share/doc/tinc
+etc/tinc

debian/tinc.docs

@@ -0,0 +1,3 @@
+NEWS
+README
+AUTHORS

debian/tinc.files

@@ -0,0 +1,6 @@
+usr/sbin/tincd
+usr/sbin/tinc
+usr/share/man
+etc
+usr/share/doc/tinc
+usr/share/info

debian/tinc.if-post-down

@@ -0,0 +1,23 @@
+#!/bin/sh
+
+set -e
+
+if [ "$IF_TINC_NET" ] ; then
+	tinc -n "$IF_TINC_NET" stop
+	sleep 0.1
+	i=0;
+	while read pid rest < /var/run/tinc.$IF_TINC_NET.pid ; do
+		if [ ! -e "/proc/$pid" ] ; then
+			exit 0
+		fi
+		
+		if [ $i = '30' ] ; then
+			echo 'Failed to stop tinc daemon!'
+			exit 1
+		fi
+		sleep 0.1
+		i=$(($i+1))
+	done
+fi
+
+exit 0

debian/tinc.if-pre-up

@@ -0,0 +1,52 @@
+#!/bin/sh
+
+set -e
+
+[ -z "$IF_TINC_NET" ] && exit 0
+
+# Read options from /etc/default
+
+. /etc/default/tinc
+
+# Set process limits
+
+setlimits() {
+  while [ $# -gt 0 ]; do
+    parm=$1 ; shift
+    if [ -n "$1" -a "${1#-}" = "$1" ]; then
+      value=$1 ; shift
+      ulimit $parm $value
+    else
+      ulimit $parm
+    fi
+  done
+}
+test -n "$LIMITS" && setlimits $LIMITS
+
+# Read options from /etc/network/interfaces
+
+[ -n "$IF_TINC_CONFIG" ]          && EXTRA="$EXTRA -c $IF_TINC_CONFIG"
+[ -n "$IF_TINC_DEBUG" ]           && EXTRA="$EXTRA -d$IF_TINC_DEBUG"
+[ -n "$IF_TINC_MLOCK" ]           && EXTRA="$EXTRA --mlock"
+[ -n "$IF_TINC_LOGFILE" ]         && EXTRA="$EXTRA --logfile=$IF_TINC_LOGFILE"
+[ -n "$IF_TINC_CHROOT" ]          && EXTRA="$EXTRA --chroot"
+[ -n "$IF_TINC_USER" ]            && EXTRA="$EXTRA --user=$IF_TINC_USER"
+
+# Start tinc daemon
+
+/usr/sbin/tincd -n "$IF_TINC_NET" -o "Interface=$IFACE" $EXTRA
+
+# Wait for it to come up properly
+
+sleep 0.1
+i=0;
+while [ ! -f "/var/run/tinc.$IF_TINC_NET.pid" ] ; do
+	if [ $i = '30' ] ; then
+		echo 'Failed to start tinc daemon!'
+		exit 1
+	fi
+	sleep 0.1
+	i=$(($i+1))
+done
+
+exit 0

debian/tinc.if-up

@@ -0,0 +1,8 @@
+#!/bin/sh
+
+set -e
+
+[ "$METHOD" = loopback ] && exit 0
+[ -n "$IF_TINC_NET" ] && exit 0
+
+invoke-rc.d tinc retry

debian/tinc.init

@@ -0,0 +1,103 @@
+#! /bin/sh
+#
+### BEGIN INIT INFO
+# Provides:          tinc
+# Required-Start:    $remote_fs $network
+# Required-Stop:     $remote_fs $network
+# Should-Start:      $syslog $named
+# Should-Stop:       $syslog
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: Start tinc daemons
+# Description:       Create a file $NETSFILE (/etc/tinc/nets.boot),
+#                    and put all the names of the networks in there.
+#                    These names must be valid directory names under
+#                    $TCONF (/etc/tinc). Lines starting with a # will be
+#                    ignored in this file.
+### END INIT INFO
+#
+# Based on Lubomir Bulej's Redhat init script.
+
+. /lib/lsb/init-functions
+
+DAEMON="/usr/sbin/tincd"
+CONTROL="/usr/sbin/tinc"
+NAME="tinc"
+DESC="tinc daemons"
+TCONF="/etc/tinc"
+NETSFILE="$TCONF/nets.boot"
+NETS=""
+
+test -f $DAEMON || exit 0
+
+[ -r /etc/default/tinc ] && . /etc/default/tinc
+
+# foreach_net "what-to-say" action [arguments...]
+foreach_net() {
+  if [ ! -f $NETSFILE ] ; then
+    echo "Please create $NETSFILE."
+    exit 0
+  fi
+  echo -n "$1"
+  shift
+  egrep '^[ ]*[a-zA-Z0-9_-]+' $NETSFILE | while read net args; do
+    echo -n " $net"
+    case "$1" in
+      start|restart) $CONTROL -n $net $1 $EXTRA $args ;;
+      *) $CONTROL -n $net $1 ;;
+    esac
+  done
+  echo "."
+}
+
+signal_running() {
+  for i in /var/run/tinc.*pid; do
+    if [ -f "$i" ]; then
+      head -1 $i | while read pid junk; do
+        kill -$1 $pid
+      done
+    fi
+  done
+}
+
+setlimits() {
+  while [ $# -gt 0 ]; do
+    parm=$1 ; shift
+    if [ -n "$1" -a "${1#-}" = "$1" ]; then
+      value=$1 ; shift
+      ulimit $parm $value
+    else
+      ulimit $parm
+    fi
+  done
+}
+
+test -n "$LIMITS" && setlimits $LIMITS
+
+case "$1" in
+  start)
+    foreach_net "Starting $DESC:" start
+  ;;
+  stop)
+    foreach_net "Stopping $DESC:" stop
+  ;;
+  reload|force-reload)
+    foreach_net "Reloading $DESC configuration:" reload
+  ;;
+  restart)
+    foreach_net "Restarting $DESC:" restart
+  ;;
+  force-restart)
+    $0 stop
+    $0 start
+  ;;
+  retry)
+    signal_running ALRM
+  ;;
+  *)
+    echo "Usage: /etc/init.d/$NAME {start|stop|reload|restart|force-reload|retry}"
+    exit 1
+  ;;
+esac
+
+exit 0

debian/tinc.install

@@ -0,0 +1,7 @@
+usr/sbin/tincd
+usr/sbin/tinc
+usr/share/doc/tinc/tinc.html
+usr/share/man/man5
+usr/share/man/man8/tincd.*
+usr/share/man/man8/tinc.*
+usr/share/info