tinc (1.1~pre2-1) experimental; urgency=low
* first cut of 1.1-tobe.
Rewrote control scripts et al to use tincctl.
* build-depend on libssl >>1.0.0 to get proper EC support
* remove crypto-related symlinks from src/ in clean --
probably should go into upstream makefile instead
tinc (1.0.35-2) unstable; urgency=medium
* Bump Standards-Version and Build-Depend on debhelper-compat (= 12).
* Remove calls to dh_installinit and dh_systemd_start from debian/rules,
compat level 12 does the right thing by default.
* Ensure we clean up doc/tinc.info.
tinc (1.0.34-1) unstable; urgency=medium
[ Guus Sliepen ]
* New upstream release.
- Fixes a potential segmentation fault when connecting to an IPv6
peer via a proxy. Closes: #887401
* Add support for the $EXTRA variable in /etc/default/tinc when using
systemd. Closes: #887116
[ Benda Xu ]
* Prevent possible incorrect IPv6 checksums due to function inlining.
Closes: #891400
tinc (1.0.33-1) unstable; urgency=medium
* New upstream release.
* Test for /etc/default/tinc before trying to source it. Closes: #777262
* Use --runstatedir=/run.
tinc (1.0.32-1) unstable; urgency=medium
* New upstream release.
* Add a note to new nets.boot files that it is not used with systemd.
Closes: #841052
* In the post-down script, read the pid file only once. Closes: #832784
* Explicitly use /bin/sleep from coreutils. Closes: #772379
* Bump Standards-Version.
tinc (1.0.27-1) unstable; urgency=medium
* New upstream release.
* Bump Standards-Version.
* Add native systemd unit files.
* Automatically convert networks listed in nets.boot to systemd service
instances on upgrade.
tinc (1.0.26-1) unstable; urgency=medium
* New upstream release.
* Use the contents, not the presence, of the pidfile to check that tincd is
shut down properly. Closes: #774682
* Bump Standards-Version.
tinc (1.0.24-2.1) unstable; urgency=medium
* NMU after getting go ahead from guus on #tinc
* Add a -dbg package which contains the debugging symbols for tinc
Thanks hark@puscii.nl (Closes: #752561)
tinc (1.0.24-2) unstable; urgency=medium
* Improve the init script: stopping tinc now waits for the process to
terminate. If that doesn't happen in 5 seconds, it will send the TERM
signal again (which helps if tinc is waiting for a script to finish
executing). It now also detects whether the process mentioned in the PID
file is actually running, and if not it will exit early and without
warnings. Closes: #748107
tinc (1.0.24-2~bpo70+1) wheezy-backports; urgency=medium
* Backport to wheezy-backports.
* Add myself to Uploaders.
tinc (1.0.24-2) unstable; urgency=medium
* Improve the init script: stopping tinc now waits for the process to
terminate. If that doesn't happen in 5 seconds, it will send the TERM
signal again (which helps if tinc is waiting for a script to finish
executing). It now also detects whether the process mentioned in the PID
file is actually running, and if not it will exit early and without
warnings. Closes: #748107
tinc (1.0.22-1~bpo70+1) wheezy-backports; urgency=low
* Rebuilt for wheezy-backports.
tinc (1.0.22-1) unstable; urgency=low
* New upstream release.
- Handles whitespace between command line flags and optional arguments.
Closes: #710267
* Bump Standards-Version.
* Source /lib/lsb/init-functions in the init.d script.
* Don't use texi2html anymore, use automake's install-html target which uses
makeinfo.
tinc (1.0.19-3~bpo60+1) squeeze-backports; urgency=high
* Rebuild for squeeze-backports.
* Build-depend on libvdeplug2-dev, not libvdeplug-dev,
as it is how it is named in squeeze.
tinc (1.0.19-3) unstable; urgency=high
* Drop packets forwarded via TCP if they are too big (CVE-2013-1428).
tinc (1.0.19-2~bpo60+1) squeeze-backports; urgency=low
* Rebuild for squeeze-backports.
* Build-depend on libvdeplug2-dev, not libvdeplug-dev,
as it is how it is named in squeeze.
tinc (1.0.19-2) unstable; urgency=low
* Fix behaviour of tinc-pidfile. Closes: #679130
* Enable parallel building in debian/rules.
tinc (1.0.19-1) unstable; urgency=low
* New upstream release.
* Bump debian/compat so tinc gets built with hardening flags.
* Allow tinc-pidfile in /etc/network/interfaces.
tinc (1.0.18-1~bpo60+1) squeeze-backports; urgency=low
* Rebuild for squeeze-backports.
* Build-Depend on libvdeplug-dev | libvdeplug2-dev, to compensate
for package rename in wheezy.
tinc (1.0.18-1) unstable; urgency=low
* New upstream release.
tinc (1.0.12-2) unstable; urgency=low
* Remove debconf questions. Closes: #572116
Apparently debconf may not be used to ask a question at install time and
use the answer at upgrade time. Instead of kludging around this
restriction, no questions are asked anymore, and tinc will now always be
restarted when upgrading.
* Wait up to 5 seconds for tinc daemon to stop before restarting it.
tinc (1.0.12-1) unstable; urgency=low
* New upstream release.
* Bump Standards-Version.
* Migrate from CDBS to debhelper.
* Convert source package to 3.0 (quilt) format.
* Remove useless tinc.modules.
* Use init.d script from Michael Tokarev, allowing per-network arguments to
tincd.
* Remove update-rc.d calls from postinst and postrm.
* Let the init.d script depend on $remote_fs.
tinc (1.0.4-2) unstable; urgency=low
* Compensate for change in texinfo's output directory. Closes: #318562
* Include Czech translation of the debconf questions. Closes: #312982
tinc (1.0.3-4) unstable; urgency=low
* Call debconf early in postinst so it won't get confused by output
from other commands in the postinst script. Closes: #292920
* If MAKEDEV doesn't know about net/tun, fall back to tun.
tinc (1.0.3-3) unstable; urgency=low
* Fix clean rule in debian/rules.
tinc (1.0.3-2) unstable; urgency=low
* Don't check for /dev/tap* in postinst if we don't create them anyway.
* MAKEDEV expects net/tun instead of tun.
* Don't ask if /dev/net/tun should be created, just do it.
Closes: #259489, #292450
* Move $EXTRA from init.d/tinc to /etc/default/tinc. Closes: #281366
tinc (1.0.3-1) unstable; urgency=low
* New upstream release.
* Adopting the package from Ivo.
* Use invoke-rc.d, and tell user to do so as well. Closes: #223276
* Let force-reload do the same thing as reload. Closes: #230180
tinc (1.0.2-2) unstable; urgency=low
* debian/control: Oops, really make that automake1.7.
tinc (1.0.2-1) unstable; urgency=low
* New upstream release:
* Fix broken replies to CHAL_RESP. (Closes: #217646)
* debian/control: Updated automake build dependency to automake1.7.
(Closes: #219360)
tinc (1.0.1-2) unstable; urgency=low
* debian/dirs: Removed, moved contents to tinc.dirs.
(Closes: #208591)
* debian/docs: Renamed to tinc.docs.
* debian/rules: Install the contents of doc/sample-config.tar.gz in
/usr/share/doc/tinc/examples instead of /etc/tinc.
* debian/Makefile*: Removed.
tinc (1.0.1-1) unstable; urgency=low
* New upstream release.
* debian/patches/001_openbsd_device.c.patch: Removed.
tinc (1.0release-1) unstable; urgency=low
* New upstream version. (Closes: #204639)
* Fixes switching back to normal logging mode when killing with
SIGINT twice. (Closes: #175633)
* Uses one SSL context struct for each connection, speeding up
encrypting/decrypting data; don't throw away out of sequence
packets. (Closes: #188874)
* Fixes handling of broadcast messages. (Closes: #175632)
* debian/rules: Use cdbs.
* debian/control: Build-Depend on cdbs, liblzo-dev.
* debian/patches/001_openbsd_device.c.patch: Sync openbsd/device.c to
latest CVS version.
tinc (1.0pre8-6) unstable; urgency=low
* debian/po/fr.po: Added French debconf translation. (Closes: #201803)
tinc (1.0pre8-5) unstable; urgency=low
* debian/*: Change to po-debconf, thanks to From: Michel Grentzinger
<mic.grentz@online.fr> for the patch:
- change debhelper dependency to 4.1.16 (according to man
po-debconf),
- manually add nl translation in old tinc.templates (master),
- run debconf-gettextize debian/tinc.templates,
- move old templates files (debian/tinc.templates.*),
- change construction "If you say no" to "If you refuse",
* debian/rules: Call po2debconf.
* debian/rules: Don't copy COPYING.README to the package.
* debian/control: Update Standards-Version.
* debian/conffiles: Removed.
* debian/postinst: No longer use mknod directly, use MAKEDEV.
tinc (1.0pre8-4) unstable; urgency=low
* src/net.h, src/net_packet.c, src/net_setup.c: Apply fix from CVS
for OpenSSL-related memory leaks. (Closes: #189432)
tinc (1.0pre8-3) unstable; urgency=low
* m4/openssl.m4: Updated to CVS version. (Closes: #184400)
tinc (1.0pre8-2) unstable; urgency=low
* debian/postinst: Create /dev/net/tun if it doesn't exist.
* debian/tinc.modules: Add alias for /dev/net/tun.
* debian/rules: Install tinc.modules.
* These things together: (Closes: #151967, #153156)
tinc (1.0pre8-1) unstable; urgency=low
* New upstream version.
* debian/rules:
- DEB_BUILD_OPTIONS support.
- Enable --enable-tracing by default.
tinc (1.0pre7-3) unstable; urgency=low
* Properly install _all_ info pages. (Closes: #144718)
tinc (1.0pre7-2) unstable; urgency=low
* Dutch translation wasn't being installed.
tinc (1.0pre7-1) unstable; urgency=medium
* New upstream release.
tinc (1.0pre6-3) unstable; urgency=medium
* Synched with upstream CVS.
* Added build dependency on zlib1g-dev. (Closes: #141705)
tinc (1.0pre6-2) unstable; urgency=low
* The Section was non-US again, so changed it back to main/net.
tinc (1.0pre6-1) unstable; urgency=low
* New upstream release.
* Fixed text in debian/copyright
tinc (1.0pre5-4) unstable; urgency=low
* Added a debconf question for restarting on upgrade.
* Added reload option to init.d, start with EXTRA='-d' default.
* Moved from non-US to main.
* Install example configuration files.
* The HTML documentation wasn't installed; fixed.
tinc (1.0pre5-3) unstable; urgency=low
* Config variables are now treated case sentitivly again.
* Added a forgotten xstrdup.
tinc (1.0pre5-2) unstable; urgency=low
* MaxTimeout accidentally wasn't configurable. (Closes: #119653)
tinc (1.0pre5-1) unstable; urgency=low
* New upstream version. (Closes: #119653)
* Init script redone in sh.
tinc (1.0pre4-1.cvs010621.6) unstable; urgency=low
* Somehow po-Makefile.in.in.diff got lost, readded. (Closes: #119157)
tinc (1.0pre4-1.cvs010621.5) unstable; urgency=low
* Fix a typo in postinst that let it MAKEDEV even on devfs.
(Closes: #116034)
tinc (1.0pre4-1.cvs010621.4) unstable; urgency=low
* Ask before creating the device files. (Closes: #111099)
* Add a section to the info file.
tinc (1.0pre4-1.cvs010621.3) unstable; urgency=low
* Build and install html documentation. (Closes: #106843)
* Remove build-time dependency on libc6-dev.
tinc (1.0pre4-1.cvs010621.2) unstable; urgency=low
* Changed location of the pidfile. (Closes: #102798)
tinc (1.0pre4-1.cvs010621.1) unstable; urgency=low
* New upstream version. (Closes: #98730)
* Rebuilding automatically inserted new config.{sub|guess}.
(Closes: #98165)
* Updated Standards-Version.
* Don't include a sample configuration file.
tinc (1.0pre3-5) unstable; urgency=low
* Fixed an error in the init script that prevented tinc from
starting correctly.
tinc (1.0pre3-4) unstable; urgency=low
* Change build-depends for OpenSSL to libssl096-dev
(Closes: #84197, #84873).
tinc (1.0pre3-3) unstable; urgency=low
* Set architecture to any (really this time!) (Closes: #80451).
* Section set to non-US
tinc (1.0pre3-2) unstable; urgency=low
* Set architecture to any (Closes: #80451).
* Added tinc.modules with some useful module aliases.
tinc (1.0pre3-1) unstable; urgency=low
* New upstream version (1.0pre3) (Closes: #71274).
* Better Depends and Build-Depends lines.
* Dropped dependencies on libgmp, added libssl.
* doc-base.tinc: New file.
* Deleted the file shlibs, as there on longer is a libblowfish.
* Patch po/Makefile.in.in from po-Makefile.in.in.diff if necessary.
* Use dh_perl to get accurate perl dependencies.
tinc (1.0pre2-1.1) unstable; urgency=low
* NMU at Ivo's request as his application is being processed, and his
sponsor is based in the US.
tinc (1.0pre2-1) unstable; urgency=low
* postinst creates a file /etc/tinc/nets.boot, containing all networks
to be started upon system startup;
* init.d script starts all networks from that list.
* postinst script creates tap devices.
tinc (1.0pre1-0.4) unstable; urgency=low
* postinst script.
tinc (1.0pre1-0.3) unstable; urgency=low
* system startup script.
tinc (1.0pre1-0.2) unstable; urgency=low
* Included the blowfish license.
tinc (1.0pre1-0.1) unstable; urgency=low
* Initial Release.
