tinc (1.0.35-2) unstable; urgency=medium
* Bump Standards-Version and Build-Depend on debhelper-compat (= 12).
* Remove calls to dh_installinit and dh_systemd_start from debian/rules,
compat level 12 does the right thing by default.
* Ensure we clean up doc/tinc.info.
tinc (1.0.34-1) unstable; urgency=medium
[ Guus Sliepen ]
* New upstream release.
- Fixes a potential segmentation fault when connecting to an IPv6
peer via a proxy. Closes: #887401
* Add support for the $EXTRA variable in /etc/default/tinc when using
systemd. Closes: #887116
[ Benda Xu ]
* Prevent possible incorrect IPv6 checksums due to function inlining.
Closes: #891400
tinc (1.0.33-1) unstable; urgency=medium
* New upstream release.
* Test for /etc/default/tinc before trying to source it. Closes: #777262
* Use --runstatedir=/run.
tinc (1.0.32-1) unstable; urgency=medium
* New upstream release.
* Add a note to new nets.boot files that it is not used with systemd.
Closes: #841052
* In the post-down script, read the pid file only once. Closes: #832784
* Explicitly use /bin/sleep from coreutils. Closes: #772379
* Bump Standards-Version.
tinc (1.0.28-1~bpo8+1) jessie-backports; urgency=medium
* Rebuild for jessie-backports.
tinc (1.0.28-1) unstable; urgency=medium
* New upstream release.
- Fixes FTBFS on kfreebsd.
* Systemd service files are now provided by upstream.
tinc (1.0.27-1) unstable; urgency=medium
* New upstream release.
* Bump Standards-Version.
* Add native systemd unit files.
* Automatically convert networks listed in nets.boot to systemd service
instances on upgrade.
tinc (1.0.26-1) unstable; urgency=medium
* New upstream release.
* Use the contents, not the presence, of the pidfile to check that tincd is
shut down properly. Closes: #774682
* Bump Standards-Version.
tinc (1.0.24-2.1) unstable; urgency=medium
* NMU after getting go ahead from guus on #tinc
* Add a -dbg package which contains the debugging symbols for tinc
Thanks hark@puscii.nl (Closes: #752561)
tinc (1.0.24-2) unstable; urgency=medium
* Improve the init script: stopping tinc now waits for the process to
terminate. If that doesn't happen in 5 seconds, it will send the TERM
signal again (which helps if tinc is waiting for a script to finish
executing). It now also detects whether the process mentioned in the PID
file is actually running, and if not it will exit early and without
warnings. Closes: #748107
tinc (1.0.24-2~bpo70+1) wheezy-backports; urgency=medium
* Backport to wheezy-backports.
* Add myself to Uploaders.
tinc (1.0.24-2) unstable; urgency=medium
* Improve the init script: stopping tinc now waits for the process to
terminate. If that doesn't happen in 5 seconds, it will send the TERM
signal again (which helps if tinc is waiting for a script to finish
executing). It now also detects whether the process mentioned in the PID
file is actually running, and if not it will exit early and without
warnings. Closes: #748107
tinc (1.0.23-2) unstable; urgency=low
* Use if-statements instead of && in shell scripts. Closes: #731279
The && operator does not clear the error status, and if the next statement
in a shell script does not change the error status it would cause the
script to prematurely exit. Thanks to Peter Reinholdtsen for spotting it.
* Use absolute path to tincd in the if-post-down script.
tinc (1.0.22-1) unstable; urgency=low
* New upstream release.
- Handles whitespace between command line flags and optional arguments.
Closes: #710267
* Bump Standards-Version.
* Source /lib/lsb/init-functions in the init.d script.
* Don't use texi2html anymore, use automake's install-html target which uses
makeinfo.
tinc (1.0.22-1~bpo70+1) wheezy-backports; urgency=low
* Rebuilt for wheezy-backports.
tinc (1.0.22-1) unstable; urgency=low
* New upstream release.
- Handles whitespace between command line flags and optional arguments.
Closes: #710267
* Bump Standards-Version.
* Source /lib/lsb/init-functions in the init.d script.
* Don't use texi2html anymore, use automake's install-html target which uses
makeinfo.
tinc (1.0.19-3~bpo60+1) squeeze-backports; urgency=high
* Rebuild for squeeze-backports.
* Build-depend on libvdeplug2-dev, not libvdeplug-dev,
as it is how it is named in squeeze.
tinc (1.0.19-3) unstable; urgency=high
* Drop packets forwarded via TCP if they are too big (CVE-2013-1428).
tinc (1.0.19-2~bpo60+1) squeeze-backports; urgency=low
* Rebuild for squeeze-backports.
* Build-depend on libvdeplug2-dev, not libvdeplug-dev,
as it is how it is named in squeeze.
tinc (1.0.19-2) unstable; urgency=low
* Fix behaviour of tinc-pidfile. Closes: #679130
* Enable parallel building in debian/rules.
tinc (1.0.19-1) unstable; urgency=low
* New upstream release.
* Bump debian/compat so tinc gets built with hardening flags.
* Allow tinc-pidfile in /etc/network/interfaces.
tinc (1.0.18-1~bpo60+1) squeeze-backports; urgency=low
* Rebuild for squeeze-backports.
* Build-Depend on libvdeplug-dev | libvdeplug2-dev, to compensate
for package rename in wheezy.
tinc (1.0.18-1) unstable; urgency=low
* New upstream release.
tinc (1.0.15-1) unstable; urgency=low
* New upstream release.
* Send SIGALRM to running tinc daemons whenever an interface is brought up
with the ifupdown framework. Based on a patch from Joachim Breitner.
Closes: #629880
* Allow tinc daemons to be started using ifupdown.
tinc (1.0.12-2) unstable; urgency=low
* Remove debconf questions. Closes: #572116
Apparently debconf may not be used to ask a question at install time and
use the answer at upgrade time. Instead of kludging around this
restriction, no questions are asked anymore, and tinc will now always be
restarted when upgrading.
* Wait up to 5 seconds for tinc daemon to stop before restarting it.
tinc (1.0.12-1) unstable; urgency=low
* New upstream release.
* Bump Standards-Version.
* Migrate from CDBS to debhelper.
* Convert source package to 3.0 (quilt) format.
* Remove useless tinc.modules.
* Use init.d script from Michael Tokarev, allowing per-network arguments to
tincd.
* Remove update-rc.d calls from postinst and postrm.
* Let the init.d script depend on $remote_fs.
tinc (1.0.12-1~bpo50) lenny-backports; urgency=low
* New upstream release.
* Keep debian/ from 1.0.11-1~bpo50.
* Use init.d script from Michael Tokarev, allowing per-network arguments to
tincd.
* Let the init.d script depend on $remote_fs.
tinc (1.0.11-1~bpo50+1) lenny-backports; urgency=low
* Rebuild for lenny-backports.
tinc (1.0.11-1) unstable; urgency=low
* New upstream release.
* Cope with texi2html arbitrarily changing its output directory.
Closes: #552927
* Do not stop tinc when configuring a new version, just restart after
the upgrade.
tinc (1.0.11-1~bpo50+1) lenny-backports; urgency=low
* Rebuild for lenny-backports.
tinc (1.0.11-1) unstable; urgency=low
* New upstream release.
* Cope with texi2html arbitrarily changing its output directory.
Closes: #552927
* Do not stop tinc when configuring a new version, just restart after
the upgrade.
