Import Debian changes 1.1~pre2-1

tinc (1.1~pre2-1) experimental; urgency=low

  * first cut of 1.1-tobe.
    Rewrote control scripts et al to use tincctl.
  * build-depend on libssl >>1.0.0 to get proper EC support
  * remove crypto-related symlinks from src/ in clean --
    probably should go into upstream makefile instead

COPYING

@@ -1,4 +1,4 @@
-Copyright (C) 1998-2018 Ivo Timmermans, Guus Sliepen and others.
+Copyright (C) 1998-2010 Ivo Timmermans, Guus Sliepen and others.
 See the AUTHORS file for a complete list.
 
 This program is free software; you can redistribute it and/or modify it under

INSTALL

@@ -1,8 +1,8 @@
 Installation Instructions
 *************************
 
-   Copyright (C) 1994-1996, 1999-2002, 2004-2016 Free Software
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
-Foundation, Inc.
+2006, 2007, 2008, 2009 Free Software Foundation, Inc.
 
    Copying and distribution of this file, with or without modification,
 are permitted in any medium without royalty provided the copyright
@@ -12,96 +12,97 @@ without warranty of any kind.
 Basic Installation
 ==================
 
-   Briefly, the shell command './configure && make && make install'
+   Briefly, the shell commands `./configure; make; make install' should
-should configure, build, and install this package.  The following
+configure, build, and install this package.  The following
-more-detailed instructions are generic; see the 'README' file for
+more-detailed instructions are generic; see the `README' file for
 instructions specific to this package.  Some packages provide this
-'INSTALL' file but do not implement all of the features documented
+`INSTALL' file but do not implement all of the features documented
 below.  The lack of an optional feature in a given package is not
 necessarily a bug.  More recommendations for GNU packages can be found
 in *note Makefile Conventions: (standards)Makefile Conventions.
 
-   The 'configure' shell script attempts to guess correct values for
+   The `configure' shell script attempts to guess correct values for
 various system-dependent variables used during compilation.  It uses
-those values to create a 'Makefile' in each directory of the package.
+those values to create a `Makefile' in each directory of the package.
-It may also create one or more '.h' files containing system-dependent
+It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script 'config.status' that
+definitions.  Finally, it creates a shell script `config.status' that
 you can run in the future to recreate the current configuration, and a
-file 'config.log' containing compiler output (useful mainly for
+file `config.log' containing compiler output (useful mainly for
-debugging 'configure').
+debugging `configure').
 
-   It can also use an optional file (typically called 'config.cache' and
+   It can also use an optional file (typically called `config.cache'
-enabled with '--cache-file=config.cache' or simply '-C') that saves the
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
-results of its tests to speed up reconfiguring.  Caching is disabled by
+the results of its tests to speed up reconfiguring.  Caching is
-default to prevent problems with accidental use of stale cache files.
+disabled by default to prevent problems with accidental use of stale
+cache files.
 
    If you need to do unusual things to compile the package, please try
-to figure out how 'configure' could check whether to do them, and mail
+to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the 'README' so they can
+diffs or instructions to the address given in the `README' so they can
 be considered for the next release.  If you are using the cache, and at
-some point 'config.cache' contains results you don't want to keep, you
+some point `config.cache' contains results you don't want to keep, you
 may remove or edit it.
 
-   The file 'configure.ac' (or 'configure.in') is used to create
+   The file `configure.ac' (or `configure.in') is used to create
-'configure' by a program called 'autoconf'.  You need 'configure.ac' if
+`configure' by a program called `autoconf'.  You need `configure.ac' if
-you want to change it or regenerate 'configure' using a newer version of
+you want to change it or regenerate `configure' using a newer version
-'autoconf'.
+of `autoconf'.
 
    The simplest way to compile this package is:
 
-  1. 'cd' to the directory containing the package's source code and type
+  1. `cd' to the directory containing the package's source code and type
-     './configure' to configure the package for your system.
+     `./configure' to configure the package for your system.
 
-     Running 'configure' might take a while.  While running, it prints
+     Running `configure' might take a while.  While running, it prints
      some messages telling which features it is checking for.
 
-  2. Type 'make' to compile the package.
+  2. Type `make' to compile the package.
 
-  3. Optionally, type 'make check' to run any self-tests that come with
+  3. Optionally, type `make check' to run any self-tests that come with
      the package, generally using the just-built uninstalled binaries.
 
-  4. Type 'make install' to install the programs and any data files and
+  4. Type `make install' to install the programs and any data files and
      documentation.  When installing into a prefix owned by root, it is
      recommended that the package be configured and built as a regular
-     user, and only the 'make install' phase executed with root
+     user, and only the `make install' phase executed with root
      privileges.
 
-  5. Optionally, type 'make installcheck' to repeat any self-tests, but
+  5. Optionally, type `make installcheck' to repeat any self-tests, but
      this time using the binaries in their final installed location.
      This target does not install anything.  Running this target as a
-     regular user, particularly if the prior 'make install' required
+     regular user, particularly if the prior `make install' required
      root privileges, verifies that the installation completed
      correctly.
 
   6. You can remove the program binaries and object files from the
-     source code directory by typing 'make clean'.  To also remove the
+     source code directory by typing `make clean'.  To also remove the
-     files that 'configure' created (so you can compile the package for
+     files that `configure' created (so you can compile the package for
-     a different kind of computer), type 'make distclean'.  There is
+     a different kind of computer), type `make distclean'.  There is
-     also a 'make maintainer-clean' target, but that is intended mainly
+     also a `make maintainer-clean' target, but that is intended mainly
      for the package's developers.  If you use it, you may have to get
      all sorts of other programs in order to regenerate files that came
      with the distribution.
 
-  7. Often, you can also type 'make uninstall' to remove the installed
+  7. Often, you can also type `make uninstall' to remove the installed
      files again.  In practice, not all packages have tested that
      uninstallation works correctly, even though it is required by the
      GNU Coding Standards.
 
-  8. Some packages, particularly those that use Automake, provide 'make
+  8. Some packages, particularly those that use Automake, provide `make
      distcheck', which can by used by developers to test that all other
-     targets like 'make install' and 'make uninstall' work correctly.
+     targets like `make install' and `make uninstall' work correctly.
      This target is generally not run by end users.
 
 Compilers and Options
 =====================
 
    Some systems require unusual options for compilation or linking that
-the 'configure' script does not know about.  Run './configure --help'
+the `configure' script does not know about.  Run `./configure --help'
 for details on some of the pertinent environment variables.
 
-   You can give 'configure' initial values for configuration parameters
+   You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment.  Here is
+by setting variables in the command line or in the environment.  Here
-an example:
+is an example:
 
      ./configure CC=c99 CFLAGS=-g LIBS=-lposix
 
@@ -112,21 +113,21 @@ Compiling For Multiple Architectures
 
    You can compile the package for more than one kind of computer at the
 same time, by placing the object files for each architecture in their
-own directory.  To do this, you can use GNU 'make'.  'cd' to the
+own directory.  To do this, you can use GNU `make'.  `cd' to the
 directory where you want the object files and executables to go and run
-the 'configure' script.  'configure' automatically checks for the source
+the `configure' script.  `configure' automatically checks for the
-code in the directory that 'configure' is in and in '..'.  This is known
+source code in the directory that `configure' is in and in `..'.  This
-as a "VPATH" build.
+is known as a "VPATH" build.
 
-   With a non-GNU 'make', it is safer to compile the package for one
+   With a non-GNU `make', it is safer to compile the package for one
 architecture at a time in the source code directory.  After you have
-installed the package for one architecture, use 'make distclean' before
+installed the package for one architecture, use `make distclean' before
 reconfiguring for another architecture.
 
    On MacOS X 10.5 and later systems, you can create libraries and
 executables that work on multiple system types--known as "fat" or
-"universal" binaries--by specifying multiple '-arch' options to the
+"universal" binaries--by specifying multiple `-arch' options to the
-compiler but only a single '-arch' option to the preprocessor.  Like
+compiler but only a single `-arch' option to the preprocessor.  Like
 this:
 
      ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
@@ -135,104 +136,100 @@ this:
 
    This is not guaranteed to produce working output in all cases, you
 may have to build one architecture at a time and combine the results
-using the 'lipo' tool if you have problems.
+using the `lipo' tool if you have problems.
 
 Installation Names
 ==================
 
-   By default, 'make install' installs the package's commands under
+   By default, `make install' installs the package's commands under
-'/usr/local/bin', include files under '/usr/local/include', etc.  You
+`/usr/local/bin', include files under `/usr/local/include', etc.  You
-can specify an installation prefix other than '/usr/local' by giving
+can specify an installation prefix other than `/usr/local' by giving
-'configure' the option '--prefix=PREFIX', where PREFIX must be an
+`configure' the option `--prefix=PREFIX', where PREFIX must be an
 absolute file name.
 
    You can specify separate installation prefixes for
 architecture-specific files and architecture-independent files.  If you
-pass the option '--exec-prefix=PREFIX' to 'configure', the package uses
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
 PREFIX as the prefix for installing programs and libraries.
 Documentation and other data files still use the regular prefix.
 
    In addition, if you use an unusual directory layout you can give
-options like '--bindir=DIR' to specify different values for particular
+options like `--bindir=DIR' to specify different values for particular
-kinds of files.  Run 'configure --help' for a list of the directories
+kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.  In general, the default
+you can set and what kinds of files go in them.  In general, the
-for these options is expressed in terms of '${prefix}', so that
+default for these options is expressed in terms of `${prefix}', so that
-specifying just '--prefix' will affect all of the other directory
+specifying just `--prefix' will affect all of the other directory
 specifications that were not explicitly provided.
 
    The most portable way to affect installation locations is to pass the
-correct locations to 'configure'; however, many packages provide one or
+correct locations to `configure'; however, many packages provide one or
 both of the following shortcuts of passing variable assignments to the
-'make install' command line to change installation locations without
+`make install' command line to change installation locations without
 having to reconfigure or recompile.
 
    The first method involves providing an override variable for each
-affected directory.  For example, 'make install
+affected directory.  For example, `make install
 prefix=/alternate/directory' will choose an alternate location for all
 directory configuration variables that were expressed in terms of
-'${prefix}'.  Any directories that were specified during 'configure',
+`${prefix}'.  Any directories that were specified during `configure',
-but not in terms of '${prefix}', must each be overridden at install time
+but not in terms of `${prefix}', must each be overridden at install
-for the entire installation to be relocated.  The approach of makefile
+time for the entire installation to be relocated.  The approach of
-variable overrides for each directory variable is required by the GNU
+makefile variable overrides for each directory variable is required by
-Coding Standards, and ideally causes no recompilation.  However, some
+the GNU Coding Standards, and ideally causes no recompilation.
-platforms have known limitations with the semantics of shared libraries
+However, some platforms have known limitations with the semantics of
-that end up requiring recompilation when using this method, particularly
+shared libraries that end up requiring recompilation when using this
-noticeable in packages that use GNU Libtool.
+method, particularly noticeable in packages that use GNU Libtool.
 
-   The second method involves providing the 'DESTDIR' variable.  For
+   The second method involves providing the `DESTDIR' variable.  For
-example, 'make install DESTDIR=/alternate/directory' will prepend
+example, `make install DESTDIR=/alternate/directory' will prepend
-'/alternate/directory' before all installation names.  The approach of
+`/alternate/directory' before all installation names.  The approach of
-'DESTDIR' overrides is not required by the GNU Coding Standards, and
+`DESTDIR' overrides is not required by the GNU Coding Standards, and
 does not work on platforms that have drive letters.  On the other hand,
 it does better at avoiding recompilation issues, and works well even
-when some directory options were not specified in terms of '${prefix}'
+when some directory options were not specified in terms of `${prefix}'
-at 'configure' time.
+at `configure' time.
 
 Optional Features
 =================
 
    If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving 'configure' the
+with an extra prefix or suffix on their names by giving `configure' the
-option '--program-prefix=PREFIX' or '--program-suffix=SUFFIX'.
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
 
-   Some packages pay attention to '--enable-FEATURE' options to
+   Some packages pay attention to `--enable-FEATURE' options to
-'configure', where FEATURE indicates an optional part of the package.
+`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to '--with-PACKAGE' options, where PACKAGE
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like 'gnu-as' or 'x' (for the X Window System).  The
+is something like `gnu-as' or `x' (for the X Window System).  The
-'README' should mention any '--enable-' and '--with-' options that the
+`README' should mention any `--enable-' and `--with-' options that the
 package recognizes.
 
-   For packages that use the X Window System, 'configure' can usually
+   For packages that use the X Window System, `configure' can usually
 find the X include and library files automatically, but if it doesn't,
-you can use the 'configure' options '--x-includes=DIR' and
+you can use the `configure' options `--x-includes=DIR' and
-'--x-libraries=DIR' to specify their locations.
+`--x-libraries=DIR' to specify their locations.
 
    Some packages offer the ability to configure how verbose the
-execution of 'make' will be.  For these packages, running './configure
+execution of `make' will be.  For these packages, running `./configure
 --enable-silent-rules' sets the default to minimal output, which can be
-overridden with 'make V=1'; while running './configure
+overridden with `make V=1'; while running `./configure
 --disable-silent-rules' sets the default to verbose, which can be
-overridden with 'make V=0'.
+overridden with `make V=0'.
 
 Particular systems
 ==================
 
-   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU CC
+   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU
-is not installed, it is recommended to use the following options in
+CC is not installed, it is recommended to use the following options in
 order to use an ANSI C compiler:
 
      ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
 
 and if that doesn't work, install pre-built binaries of GCC for HP-UX.
 
-   HP-UX 'make' updates targets which have the same time stamps as their
-prerequisites, which makes it generally unusable when shipped generated
-files such as 'configure' are involved.  Use GNU 'make' instead.
-
    On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
-parse its '<wchar.h>' header file.  The option '-nodtk' can be used as a
+parse its `<wchar.h>' header file.  The option `-nodtk' can be used as
-workaround.  If GNU CC is not installed, it is therefore recommended to
+a workaround.  If GNU CC is not installed, it is therefore recommended
-try
+to try
 
      ./configure CC="cc"
 
@@ -240,26 +237,26 @@ and if that doesn't work, try
 
      ./configure CC="cc -nodtk"
 
-   On Solaris, don't put '/usr/ucb' early in your 'PATH'.  This
+   On Solaris, don't put `/usr/ucb' early in your `PATH'.  This
 directory contains several dysfunctional programs; working variants of
-these programs are available in '/usr/bin'.  So, if you need '/usr/ucb'
+these programs are available in `/usr/bin'.  So, if you need `/usr/ucb'
-in your 'PATH', put it _after_ '/usr/bin'.
+in your `PATH', put it _after_ `/usr/bin'.
 
-   On Haiku, software installed for all users goes in '/boot/common',
+   On Haiku, software installed for all users goes in `/boot/common',
-not '/usr/local'.  It is recommended to use the following options:
+not `/usr/local'.  It is recommended to use the following options:
 
      ./configure --prefix=/boot/common
 
 Specifying the System Type
 ==========================
 
-   There may be some features 'configure' cannot figure out
+   There may be some features `configure' cannot figure out
 automatically, but needs to determine by the type of machine the package
 will run on.  Usually, assuming the package is built to be run on the
-_same_ architectures, 'configure' can figure that out, but if it prints
+_same_ architectures, `configure' can figure that out, but if it prints
 a message saying it cannot guess the machine type, give it the
-'--build=TYPE' option.  TYPE can either be a short name for the system
+`--build=TYPE' option.  TYPE can either be a short name for the system
-type, such as 'sun4', or a canonical name which has the form:
+type, such as `sun4', or a canonical name which has the form:
 
      CPU-COMPANY-SYSTEM
 
@@ -268,101 +265,101 @@ where SYSTEM can have one of these forms:
      OS
      KERNEL-OS
 
-   See the file 'config.sub' for the possible values of each field.  If
+   See the file `config.sub' for the possible values of each field.  If
-'config.sub' isn't included in this package, then this package doesn't
+`config.sub' isn't included in this package, then this package doesn't
 need to know the machine type.
 
    If you are _building_ compiler tools for cross-compiling, you should
-use the option '--target=TYPE' to select the type of system they will
+use the option `--target=TYPE' to select the type of system they will
 produce code for.
 
    If you want to _use_ a cross compiler, that generates code for a
 platform different from the build platform, you should specify the
 "host" platform (i.e., that on which the generated programs will
-eventually be run) with '--host=TYPE'.
+eventually be run) with `--host=TYPE'.
 
 Sharing Defaults
 ================
 
-   If you want to set default values for 'configure' scripts to share,
+   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called 'config.site' that gives
+you can create a site shell script called `config.site' that gives
-default values for variables like 'CC', 'cache_file', and 'prefix'.
+default values for variables like `CC', `cache_file', and `prefix'.
-'configure' looks for 'PREFIX/share/config.site' if it exists, then
+`configure' looks for `PREFIX/share/config.site' if it exists, then
-'PREFIX/etc/config.site' if it exists.  Or, you can set the
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
-'CONFIG_SITE' environment variable to the location of the site script.
+`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all 'configure' scripts look for a site script.
+A warning: not all `configure' scripts look for a site script.
 
 Defining Variables
 ==================
 
    Variables not defined in a site shell script can be set in the
-environment passed to 'configure'.  However, some packages may run
+environment passed to `configure'.  However, some packages may run
 configure again during the build, and the customized values of these
 variables may be lost.  In order to avoid this problem, you should set
-them in the 'configure' command line, using 'VAR=value'.  For example:
+them in the `configure' command line, using `VAR=value'.  For example:
 
      ./configure CC=/usr/local2/bin/gcc
 
-causes the specified 'gcc' to be used as the C compiler (unless it is
+causes the specified `gcc' to be used as the C compiler (unless it is
 overridden in the site shell script).
 
-Unfortunately, this technique does not work for 'CONFIG_SHELL' due to an
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-Autoconf limitation.  Until the limitation is lifted, you can use this
+an Autoconf bug.  Until the bug is fixed you can use this workaround:
-workaround:
 
-     CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash
+     CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
 
-'configure' Invocation
+`configure' Invocation
 ======================
 
-   'configure' recognizes the following options to control how it
+   `configure' recognizes the following options to control how it
 operates.
 
-'--help'
+`--help'
-'-h'
+`-h'
-     Print a summary of all of the options to 'configure', and exit.
+     Print a summary of all of the options to `configure', and exit.
 
-'--help=short'
+`--help=short'
-'--help=recursive'
+`--help=recursive'
      Print a summary of the options unique to this package's
-     'configure', and exit.  The 'short' variant lists options used only
+     `configure', and exit.  The `short' variant lists options used
-     in the top level, while the 'recursive' variant lists options also
+     only in the top level, while the `recursive' variant lists options
-     present in any nested packages.
+     also present in any nested packages.
 
-'--version'
+`--version'
-'-V'
+`-V'
-     Print the version of Autoconf used to generate the 'configure'
+     Print the version of Autoconf used to generate the `configure'
      script, and exit.
 
-'--cache-file=FILE'
+`--cache-file=FILE'
      Enable the cache: use and save the results of the tests in FILE,
-     traditionally 'config.cache'.  FILE defaults to '/dev/null' to
+     traditionally `config.cache'.  FILE defaults to `/dev/null' to
      disable caching.
 
-'--config-cache'
+`--config-cache'
-'-C'
+`-C'
-     Alias for '--cache-file=config.cache'.
+     Alias for `--cache-file=config.cache'.
 
-'--quiet'
+`--quiet'
-'--silent'
+`--silent'
-'-q'
+`-q'
      Do not print messages saying which checks are being made.  To
-     suppress all normal output, redirect it to '/dev/null' (any error
+     suppress all normal output, redirect it to `/dev/null' (any error
      messages will still be shown).
 
-'--srcdir=DIR'
+`--srcdir=DIR'
      Look for the package's source code in directory DIR.  Usually
-     'configure' can determine that directory automatically.
+     `configure' can determine that directory automatically.
 
-'--prefix=DIR'
+`--prefix=DIR'
-     Use DIR as the installation prefix.  *note Installation Names:: for
+     Use DIR as the installation prefix.  *note Installation Names::
-     more details, including other options available for fine-tuning the
+     for more details, including other options available for fine-tuning
-     installation locations.
+     the installation locations.
 
-'--no-create'
+`--no-create'
-'-n'
+`-n'
      Run the configure checks, but stop before creating any output
      files.
 
-'configure' also accepts some other, not widely useful, options.  Run
+`configure' also accepts some other, not widely useful, options.  Run
-'configure --help' for more details.
+`configure --help' for more details.
+

Makefile.am

@@ -2,14 +2,26 @@
 
 AUTOMAKE_OPTIONS = gnu
 
-SUBDIRS = src doc systemd
+SUBDIRS =  m4 src doc gui
 
 ACLOCAL_AMFLAGS = -I m4 
 
-EXTRA_DIST = COPYING.README README.android
+EXTRA_DIST = have.h system.h COPYING.README
 
 ChangeLog:
 	git log > ChangeLog
 
-astyle:
+deb:
-	astyle --options=.astylerc -nQ src/*.[ch] src/*/*.[ch]
+	dpkg-buildpackage -rfakeroot
+
+rpm: dist
+	cp $(distdir).tar.gz /usr/src/redhat/SOURCES/
+	cp redhat/tinc.spec /usr/src/redhat/SOURCES/
+	cd /usr/src/redhat/SOURCES/ && rpm -bb tinc.spec
+
+release:
+	rm -f ChangeLog
+	$(MAKE) ChangeLog
+	echo "Please edit the NEWS file now..."
+	/usr/bin/editor NEWS
+	$(MAKE) dist

Makefile.in

@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -14,61 +15,6 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
-am__is_gnu_make = { \
-  if test -z '$(MAKELEVEL)'; then \
-    false; \
-  elif test -n '$(MAKE_HOST)'; then \
-    true; \
-  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
-    true; \
-  else \
-    false; \
-  fi; \
-}
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -88,95 +34,47 @@ POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
 subdir = .
+DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
+	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
+	$(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \
+	THANKS config.guess config.sub depcomp install-sh missing
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/attribute.m4 \
-	$(top_srcdir)/m4/ax_append_flag.m4 \
+	$(top_srcdir)/m4/curses.m4 $(top_srcdir)/m4/libevent.m4 \
-	$(top_srcdir)/m4/ax_cflags_warn_all.m4 \
+	$(top_srcdir)/m4/lzo.m4 $(top_srcdir)/m4/openssl.m4 \
-	$(top_srcdir)/m4/ax_check_compile_flag.m4 \
+	$(top_srcdir)/m4/zlib.m4 $(top_srcdir)/configure.in
-	$(top_srcdir)/m4/ax_check_link_flag.m4 \
-	$(top_srcdir)/m4/ax_require_defined.m4 $(top_srcdir)/m4/lzo.m4 \
-	$(top_srcdir)/m4/openssl.m4 $(top_srcdir)/m4/zlib.m4 \
-	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
-	$(am__configure_deps) $(am__DIST_COMMON)
 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
  configure.lineno config.status.lineno
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = config.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
 SOURCES =
 DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
-	ctags-recursive dvi-recursive html-recursive info-recursive \
+	html-recursive info-recursive install-data-recursive \
-	install-data-recursive install-dvi-recursive \
+	install-dvi-recursive install-exec-recursive \
-	install-exec-recursive install-html-recursive \
+	install-html-recursive install-info-recursive \
-	install-info-recursive install-pdf-recursive \
+	install-pdf-recursive install-ps-recursive install-recursive \
-	install-ps-recursive install-recursive installcheck-recursive \
+	installcheck-recursive installdirs-recursive pdf-recursive \
-	installdirs-recursive pdf-recursive ps-recursive \
+	ps-recursive uninstall-recursive
-	tags-recursive uninstall-recursive
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
-am__recursive_targets = \
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
-  $(RECURSIVE_TARGETS) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
-  $(RECURSIVE_CLEAN_TARGETS) \
+	distdir dist dist-all distcheck
-  $(am__extra_recursive_targets)
-AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
-	cscope distdir distdir-am dist dist-all distcheck
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
-	$(LISP)config.h.in
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
-CSCOPE = cscope
 DIST_SUBDIRS = $(SUBDIRS)
-am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in AUTHORS \
-	COPYING ChangeLog INSTALL NEWS README THANKS compile \
-	config.guess config.sub install-sh missing
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
 am__remove_distdir = \
-  if test -d "$(distdir)"; then \
+  { test ! -d "$(distdir)" \
-    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
-      && rm -rf "$(distdir)" \
+         && rm -fr "$(distdir)"; }; }
-      || { sleep 5 && rm -rf "$(distdir)"; }; \
-  else :; fi
-am__post_remove_distdir = $(am__remove_distdir)
 am__relativize = \
   dir0=`pwd`; \
   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
@@ -204,14 +102,10 @@ am__relativize = \
   reldir="$$dir2"
 DIST_ARCHIVES = $(distdir).tar.gz
 GZIP_ENV = --best
-DIST_TARGETS = dist-gzip
 distuninstallcheck_listfiles = find . -type f -print
-am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
-  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
 distcleancheck_listfiles = find . -type f -print
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
 AUTOMAKE = @AUTOMAKE@
@@ -221,6 +115,7 @@ CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
+CURSES_LIBS = @CURSES_LIBS@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
@@ -230,15 +125,21 @@ ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 GREP = @GREP@
+INCLUDES = @INCLUDES@
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 LDFLAGS = @LDFLAGS@
+LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@
+LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@
+LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
 OBJEXT = @OBJEXT@
@@ -250,6 +151,7 @@ PACKAGE_TARNAME = @PACKAGE_TARNAME@
 PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 STRIP = @STRIP@
@@ -296,27 +198,25 @@ pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
-runstatedir = @runstatedir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
 sysconfdir = @sysconfdir@
-systemd_path = @systemd_path@
 target_alias = @target_alias@
 top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
 AUTOMAKE_OPTIONS = gnu
-SUBDIRS = src doc systemd
+SUBDIRS = m4 src doc gui
 ACLOCAL_AMFLAGS = -I m4 
-EXTRA_DIST = COPYING.README README.android
+EXTRA_DIST = have.h system.h COPYING.README
 all: config.h
 	$(MAKE) $(AM_MAKEFLAGS) all-recursive
 
 .SUFFIXES:
-am--refresh: Makefile
+am--refresh:
 	@:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
@@ -329,33 +229,36 @@ $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu Makefile
+.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
 	    echo ' $(SHELL) ./config.status'; \
 	    $(SHELL) ./config.status;; \
 	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
 	esac;
 
 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 	$(SHELL) ./config.status --recheck
 
-$(top_srcdir)/configure:  $(am__configure_deps)
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	$(am__cd) $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
 $(am__aclocal_m4_deps):
 
 config.h: stamp-h1
-	@test -f $@ || rm -f stamp-h1
+	@if test ! -f $@; then \
-	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
+	  rm -f stamp-h1; \
+	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
+	else :; fi
 
 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
 	@rm -f stamp-h1
 	cd $(top_builddir) && $(SHELL) ./config.status config.h
-$(srcdir)/config.h.in:  $(am__configure_deps) 
+$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
 	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
 	rm -f stamp-h1
 	touch $@
@@ -364,25 +267,22 @@ distclean-hdr:
 	-rm -f config.h stamp-h1
 
 # This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
+# into them and run `make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
+# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
+# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run 'make');
+#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the 'make' command line.
+# (2) otherwise, pass the desired values on the `make' command line.
-$(am__recursive_targets):
+$(RECURSIVE_TARGETS):
-	@fail=; \
+	@fail= failcom='exit 1'; \
-	if $(am__make_keepgoing); then \
+	for f in x $$MAKEFLAGS; do \
-	  failcom='fail=yes'; \
+	  case $$f in \
-	else \
+	    *=* | --[!k]*);; \
-	  failcom='exit 1'; \
+	    *k*) failcom='fail=yes';; \
-	fi; \
+	  esac; \
+	done; \
 	dot_seen=no; \
 	target=`echo $@ | sed s/-recursive//`; \
-	case "$@" in \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	for subdir in $$list; do \
 	  echo "Making $$target in $$subdir"; \
 	  if test "$$subdir" = "."; then \
 	    dot_seen=yes; \
@@ -397,12 +297,57 @@ $(am__recursive_targets):
 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 	fi; test -z "$$fail"
 
-ID: $(am__tagged_files)
+$(RECURSIVE_CLEAN_TARGETS):
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
+	@fail= failcom='exit 1'; \
-tags: tags-recursive
+	for f in x $$MAKEFLAGS; do \
-TAGS: tags
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	done
 
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
 	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
@@ -418,7 +363,12 @@ tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
-	$(am__define_uniq_tagged_files); \
+	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	shift; \
 	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
@@ -430,11 +380,15 @@ tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 	      $$unique; \
 	  fi; \
 	fi
-ctags: ctags-recursive
+ctags: CTAGS
-
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-CTAGS: ctags
+		$(TAGS_FILES) $(LISP)
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	$(am__define_uniq_tagged_files); \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 	     $$unique
@@ -443,42 +397,11 @@ GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
 	  && $(am__cd) $(top_srcdir) \
 	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscope: cscope.files
-	test ! -s cscope.files \
-	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
-clean-cscope:
-	-rm -f cscope.files
-cscope.files: clean-cscope cscopelist
-cscopelist: cscopelist-recursive
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
 
-distdir: $(BUILT_SOURCES)
+distdir: $(DISTFILES)
-	$(MAKE) $(AM_MAKEFLAGS) distdir-am
-
-distdir-am: $(DISTFILES)
-	@case `sed 15q $(srcdir)/NEWS` in \
-	*"$(VERSION)"*) : ;; \
-	*) \
-	  echo "NEWS not updated; not releasing" 1>&2; \
-	  exit 1;; \
-	esac
 	$(am__remove_distdir)
 	test -d "$(distdir)" || mkdir "$(distdir)"
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
@@ -512,10 +435,13 @@ distdir-am: $(DISTFILES)
 	done
 	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
-	    $(am__make_dryrun) \
+	    test -d "$(distdir)/$$subdir" \
-	      || test -d "$(distdir)/$$subdir" \
 	    || $(MKDIR_P) "$(distdir)/$$subdir" \
 	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
 	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 	    $(am__relativize); \
 	    new_distdir=$$reldir; \
@@ -543,43 +469,37 @@ distdir-am: $(DISTFILES)
 	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
 	|| chmod -R a+r "$(distdir)"
 dist-gzip: distdir
-	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__post_remove_distdir)
+	$(am__remove_distdir)
 
 dist-bzip2: distdir
-	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
-	$(am__post_remove_distdir)
+	$(am__remove_distdir)
 
-dist-lzip: distdir
+dist-lzma: distdir
-	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
+	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
-	$(am__post_remove_distdir)
+	$(am__remove_distdir)
 
 dist-xz: distdir
-	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
+	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
-	$(am__post_remove_distdir)
+	$(am__remove_distdir)
 
 dist-tarZ: distdir
-	@echo WARNING: "Support for distribution archives compressed with" \
-		       "legacy program 'compress' is deprecated." >&2
-	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-	$(am__post_remove_distdir)
+	$(am__remove_distdir)
 
 dist-shar: distdir
-	@echo WARNING: "Support for shar distribution archives is" \
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	               "deprecated." >&2
+	$(am__remove_distdir)
-	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
-	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
-	$(am__post_remove_distdir)
 
 dist-zip: distdir
 	-rm -f $(distdir).zip
 	zip -rq $(distdir).zip $(distdir)
-	$(am__post_remove_distdir)
+	$(am__remove_distdir)
 
-dist dist-all:
+dist dist-all: distdir
-	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__post_remove_distdir)
+	$(am__remove_distdir)
 
 # This target untars the dist file and tries a VPATH configuration.  Then
 # it guarantees that the distribution is self-contained by making another
@@ -587,33 +507,31 @@ dist dist-all:
 distcheck: dist
 	case '$(DIST_ARCHIVES)' in \
 	*.tar.gz*) \
-	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
 	*.tar.bz2*) \
 	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
-	*.tar.lz*) \
+	*.tar.lzma*) \
-	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
+	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
 	*.tar.xz*) \
 	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
 	*.tar.Z*) \
 	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 	*.shar.gz*) \
-	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
 	*.zip*) \
 	  unzip $(distdir).zip ;;\
 	esac
-	chmod -R a-w $(distdir)
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
-	chmod u+w $(distdir)
+	mkdir $(distdir)/_build
-	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
+	mkdir $(distdir)/_inst
 	chmod a-w $(distdir)
 	test -d $(distdir)/_build || exit 0; \
 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
 	  && am__cwd=`pwd` \
-	  && $(am__cd) $(distdir)/_build/sub \
+	  && $(am__cd) $(distdir)/_build \
-	  && ../../configure \
+	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
-	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
 	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	    --srcdir=../.. --prefix="$$dc_install_base" \
 	  && $(MAKE) $(AM_MAKEFLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
 	  && $(MAKE) $(AM_MAKEFLAGS) check \
@@ -636,21 +554,13 @@ distcheck: dist
 	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
 	  && cd "$$am__cwd" \
 	  || exit 1
-	$(am__post_remove_distdir)
+	$(am__remove_distdir)
 	@(echo "$(distdir) archives ready for distribution: "; \
 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
 	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 distuninstallcheck:
-	@test -n '$(distuninstallcheck_dir)' || { \
+	@$(am__cd) '$(distuninstallcheck_dir)' \
-	  echo 'ERROR: trying to run $@ with an empty' \
+	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
-	       '$$(distuninstallcheck_dir)' >&2; \
-	  exit 1; \
-	}; \
-	$(am__cd) '$(distuninstallcheck_dir)' || { \
-	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
-	  exit 1; \
-	}; \
-	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
 	   || { echo "ERROR: files left after uninstall:" ; \
 	        if test -n "$(DESTDIR)"; then \
 	          echo "  (check DESTDIR support)"; \
@@ -681,15 +591,10 @@ install-am: all-am
 
 installcheck: installcheck-recursive
 install-strip:
-	if test -z '$(STRIP)'; then \
 	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
+	  `test -z '$(STRIP)' || \
-	else \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
 mostlyclean-generic:
 
 clean-generic:
@@ -770,32 +675,42 @@ ps-am:
 
 uninstall-am:
 
-.MAKE: $(am__recursive_targets) all install-am install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
+	ctags-recursive install-am install-strip tags-recursive
 
-.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
-	am--refresh check check-am clean clean-cscope clean-generic \
+	all all-am am--refresh check check-am clean clean-generic \
-	cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
+	ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
-	dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \
+	dist-lzma dist-shar dist-tarZ dist-xz dist-zip distcheck \
-	distcheck distclean distclean-generic distclean-hdr \
+	distclean distclean-generic distclean-hdr distclean-tags \
-	distclean-tags distcleancheck distdir distuninstallcheck dvi \
+	distcleancheck distdir distuninstallcheck dvi dvi-am html \
-	dvi-am html html-am info info-am install install-am \
+	html-am info info-am install install-am install-data \
-	install-data install-data-am install-dvi install-dvi-am \
+	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec install-exec-am install-html install-html-am \
+	install-exec-am install-html install-html-am install-info \
-	install-info install-info-am install-man install-pdf \
+	install-info-am install-man install-pdf install-pdf-am \
-	install-pdf-am install-ps install-ps-am install-strip \
+	install-ps install-ps-am install-strip installcheck \
-	installcheck installcheck-am installdirs installdirs-am \
+	installcheck-am installdirs installdirs-am maintainer-clean \
-	maintainer-clean maintainer-clean-generic mostlyclean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
-	mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \
+	pdf-am ps ps-am tags tags-recursive uninstall uninstall-am
-	uninstall-am
-
-.PRECIOUS: Makefile
 
 
 ChangeLog:
 	git log > ChangeLog
 
-astyle:
+deb:
-	astyle --options=.astylerc -nQ src/*.[ch] src/*/*.[ch]
+	dpkg-buildpackage -rfakeroot
+
+rpm: dist
+	cp $(distdir).tar.gz /usr/src/redhat/SOURCES/
+	cp redhat/tinc.spec /usr/src/redhat/SOURCES/
+	cd /usr/src/redhat/SOURCES/ && rpm -bb tinc.spec
+
+release:
+	rm -f ChangeLog
+	$(MAKE) ChangeLog
+	echo "Please edit the NEWS file now..."
+	/usr/bin/editor NEWS
+	$(MAKE) dist
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.

NEWS

@@ -1,238 +1,32 @@
-Version 1.0.35               October 5 2018
+Version 1.1pre2              Juli 17 2011
 
- * Prevent oracle attacks (CVE-2018-16737, CVE-2018-16738).
+ * .cookie files are renamed to .pid files, which are compatible with 1.0.x.
- * Prevent a MITM from forcing a NULL cipher for UDP (CVE-2018-16758).
 
-Version 1.0.34               June 12 2018
+ * Experimental protocol enhancements that can be enabled with the option
+   ExperimentalProtocol = yes:
 
- * Fix a potential segmentation fault when connecting to an IPv6 peer via a
+   * Ephemeral ECDH key exchange will be used for both the meta protocol and
-   proxy.
+     UDP session keys.
- * Minor improvements to the build system.
+   * Key exchanges are signed with ECDSA.
- * Make the systemd service file identical to the one from the 1.1 branch.
+   * ECDSA public keys are automatically exchanged after RSA authentication if
- * Fix a potential problem causing IPv4 sockets to not work on macOS.
+     nodes do not know each other's ECDSA public key yet.
 
-Thanks to Maximilian Stein and Wang Liu Shuai for their contributions to this
+Version 1.1pre1              June 25 2011
-version of tinc.
 
-Version 1.0.33               November 4 2017
+ * Control interface allows control of a running tinc daemon. Used by:
+   * tincctl, a commandline utility
+   * tinc-gui, a preliminary GUI implemented in Python/wxWidgets
 
- * Allow compilation from a build directory.
+ * Code cleanups and reorganization. 
- * Source code cleanups.
- * Fix some options specified on the command line not surviving a HUP signal.
- * Handle tun/tap device returning EPERM or EBUSY.
- * Disable PMTUDiscovery when TCPOnly is used.
- * Support the --runstatedir option of the autoconf 2.70.
 
-Thanks to Rafael Sadowski and Pierre-Olivier Mercier for their contributions to
+ * Repleacable cryptography backend, currently supports OpenSSL and libgcrypt.
-this version of tinc.
 
-Version 1.0.32               September 2 2017
+ * Use libevent to handle I/O events and timeouts.
 
- * Fix segmentation fault when using Cipher = none.
+ * Use splay trees instead of AVL trees to manage internal datastructures.
- * Fix Proxy = exec.
- * Support PriorityInheritance for IPv6 packets.
- * Fixes for Solaris tun/tap support.
- * Bind outgoing TCP sockets when ListenAddress is used.
 
-Thanks to Vittorio Gambaletta for his contribution to this version of tinc.
+ Thanks to Scott Lamb and Sven-Haegar Koch for their contributions to this
-
+ version of tinc.
-Version 1.0.31               January 15 2017
-
- * Remove ExecStop in tinc@.service.
-
-Thanks to Élie Bouttier for his contribution to this version of tinc.
-
-Version 1.0.30               October 30 2016
-
- * Fix troubles connecting to some HTTP proxies.
-
- * Add mitigations for the Sweet32 attack when using a 64-bit block cipher.
-
- * Use AES256 and SHA256 as the default encryption and digest algorithms.
-
-Version 1.0.29               October 9 2016
-
- * Fix UDP communication with peers with link-local IPv6 addresses.
-
- * Ensure compatibility with OpenSSL 1.1.0.
-
- * Ensure autoreconf can be run without requiring autoconf-archive.
-
- * Log warnings about dropped packets only at debug level 5.
-
-Version 1.0.28               April 10 2016
-
- * Fix compilation on BSD platforms.
-
- * Add systemd service files.
-
-Version 1.0.27               April 10 2016
-
- * When using Proxy, let the proxy resolve hostnames if tinc can't.
-
- * Fixes and improvements of the DecrementTTL option.
-
- * Fixed the $NAME variable in subnet-up/down scripts for the local Subnets.
-
- * Fixed potentially wrong checksum generation when clamping the MSS.
-
- * Properly choose between the system's or our own copy of getopt.
-
- * Fixed compiling tinc for Cygwin with MinGW installed.
-
- * Added support for OS X utun interfaces.
-
- * Documentation updates and minor fixes.
-
-Thanks to Vittorio Gambaletta, LunarShaddow, Florian Weik and Nathan Stratton
-Treadway for their contributions to this version of tinc.
-
-Version 1.0.26               July 5 2015
-
- * Tinc now forces glibc to reload /etc/resolv.conf for every hostname lookup.
-
- * Fixed --logfile without a filename on Windows.
-
- * Ensure tinc can be compiled when using musl libc.
-
-Thanks to Jo-Philipp Wich for his contribution to this version of tinc.
-
-Version 1.0.25               December 22 2014
-
- * Documentation updates.
-
- * Support linking against -lresolv on Mac OS X.
-
- * Fix scripts on Windows when using the ScriptsInterpreter option.
-
- * Allow a minimum reconnect timeout to be specified.
-
- * Support PriorityInheritance on IPv6 sockets.
-
-Thanks to David Pflug, Baptiste Jonglez, Alexis Hildebrandt, Borg, Jochen Voss,
-Tomislav Čohar and VittGam for their contributions to this version of tinc.
-
-Version 1.0.24               May 11 2014
-
- * Various compiler hardening flags are enabled by default.
-
- * Updated support for Solaris, allowing switch mode on Solaris 11.
-
- * Configuration will now also be read from a conf.d directory.
-
- * Various updates to the documentation.
-
- * Tinc now forces glibc to reload /etc/resolv.conf after it receives SIGALRM.
-
- * Fixed a potential routing loop when IndirectData or TCPOnly is used and
-   broadcast packets are being sent.
-
- * Improved security with constant time memcmp and stricter use of OpenSSL's
-   RNG functions.
-
- * Fixed all issues found by Coverity.
-
-Thanks to Florent Clairambault, Vilbrekin, luckyhacky, Armin Fisslthaler, Loïc
-Dachary and Steffan Karger for their contributions to this version of tinc.
-
-Version 1.0.23               October 19 2013
-
- * Start authentication immediately on outgoing connections (useful for sslh).
-
- * Fixed segfault when Name = $HOST but $HOST is not set.
-
- * Updated the build system and the documentation.
-
- * Clean up child processes left over from Proxy = exec.
-
-Version 1.0.22               August 13 2013
-
- * Fixed the combination of Mode = router and DeviceType = tap.
-
- * The $NAME variable is now set in subnet-up/down scripts.
-
- * Tinc now gives an error when unknown options are given on the command line.
-
- * Tinc now correctly handles a space between a short command line option and
-   an optional argument.
-
-Thanks to Etienne Dechamps for his contribution to this version of tinc.
-
-Version 1.0.21               April 22 2013
-
- * Drop packets forwarded via TCP if they are too big (CVE-2013-1428).
-
-Thanks to Martin Schobert for auditing tinc and reporting this vulnerability.
-
-Version 1.0.20               March 03 2013
-
- * Use /dev/tap0 by default on FreeBSD and NetBSD when using switch mode.
-
- * Minor improvements and clarifications in the documentation.
-
- * Allow tinc to be cross-compiled with Android's NDK.
-
- * The discovered PMTU is now also applied to VLAN tagged traffic.
-
- * The LocalDiscovery option now makes use of all addresses tinc is bound to.
-
- * Fixed support for tunemu on iOS devices.
-
- * The PriorityInheritance option now also works with switch mode.
-
- * Fixed tinc crashing when using a SOCKS5 proxy.
-
-Thanks to Mesar Hameed, Vilbrekin and Martin Schürrer for their contributions
-to this version of tinc.
-
-Version 1.0.19               June 25 2012
-
- * Allow :: notation in IPv6 Subnets.
-
- * Add support for systemd style socket activation.
-
- * Allow environment variables to be used for the Name option.
-
- * Add basic support for SOCKS proxies, HTTP proxies, and proxying through an
-   external command.
-
-Thanks to Anthony G. Basile and Michael Tokarev for their contributions to
-this version of tinc.
-
-Version 1.0.18               March 25 2012
-
- * Fixed IPv6 in switch mode by turning off DecrementTTL by default.
-
- * Allow a port number to be specified in BindToAddress, which also allows tinc
-   to listen on multiple ports.
-
- * Add support for multicast communication with UML/QEMU/KVM.
-
-Version 1.0.17               March 10 2012
-
- * The DeviceType option can now be used to select dummy, raw socket, UML and
-   VDE devices without needing to recompile tinc.
-
- * Allow multiple BindToAddress statements.
-
- * Decrement TTL value of IPv4 and IPv6 packets.
-
- * Add LocalDiscovery option allowing tinc to detect peers that are behind the
-   same NAT.
-
- * Accept Subnets passed with the -o option when StrictSubnets = yes.
-
- * Disabling old RSA keys when generating new ones now also works properly on
-   Windows.
-
-Thanks to Nick Hibma for his contribution to this version of tinc.
-
-Version 1.0.16               July 23 2011
-
- * Fixed a performance issue with TCP communication under Windows.
-
- * Fixed code that, during network outages, would cause tinc to exit when it
-   thought two nodes with identical Names were on the VPN.
 
 Version 1.0.15               June 24 2011
 
@@ -242,6 +36,8 @@ Version 1.0.15               June 24 2011
 
  * Fixed ProcessPriority option under Windows.
 
+  Thanks to Loïc Grenié for his contribution to this version of tinc.
+
 Version 1.0.14               May  8 2011
 
  * Fixed reading configuration files that do not end with a newline. Again.
@@ -357,7 +153,7 @@ Version 1.0.9                Dec 26 2008
 
  * Enable path MTU discovery by default.
 
- * Fixed a memory leak that occurred when connections were closed.
+ * Fixed a memory leak that occured when connections were closed.
 
  Thanks to Max Rijevski for his contributions to this version of tinc.
 

README

@@ -1,7 +1,7 @@
-This is the README file for tinc version 1.0.35. Installation
+This is the README file for tinc version 1.1pre2. Installation
 instructions may be found in the INSTALL file.
 
-tinc is Copyright (C) 1998-2018 by:
+tinc is Copyright (C) 1998-2011 by:
 
 Ivo Timmermans,
 Guus Sliepen <guus@tinc-vpn.org>,
@@ -15,74 +15,51 @@ the Free Software Foundation; either version 2 of the License, or (at
 your option) any later version. See the file COPYING for more details.
 
 
+This is a pre-release
+---------------------
+
+Please note that this is NOT a stable release. Until version 1.1.0 is released,
+please use one of the 1.0.x versions if you need a stable version of tinc.
+
+Although tinc 1.1 will be protocol compatible with tinc 1.0.x, the
+functionality of the tincctl program may still change, and the control socket
+protocol is not fixed yet.
+
+
 Security statement
 ------------------
 
-In August 2000, we discovered the existence of a security hole in all versions
+This version uses an experimental and unfinished cryptographic protocol. Use
-of tinc up to and including 1.0pre2. This had to do with the way we exchanged
+it at your own risk.
-keys. Since then, we have been working on a new authentication scheme to make
-tinc as secure as possible. The current version uses the OpenSSL library and
-uses strong authentication with RSA keys.
-
-On the 29th of December 2001, Jerome Etienne posted a security analysis of tinc
-1.0pre4. Due to a lack of sequence numbers and a message authentication code
-for each packet, an attacker could possibly disrupt certain network services or
-launch a denial of service attack by replaying intercepted packets. The current
-version adds sequence numbers and message authentication codes to prevent such
-attacks.
-
-On September the 15th of 2003, Peter Gutmann contacted us and showed us a
-writeup describing various security issues in several VPN daemons. He showed
-that tinc lacks perfect forward security, the connection authentication could
-be done more properly, that the sequence number we use as an IV is not the best
-practice and that the default length of the HMAC for packets is too short in
-his opinion. We do not know of a way to exploit these weaknesses, but these
-issues are being addressed in the tinc 1.1 branch.
-
-The Sweet32 attack affects versions of tinc prior to 1.0.30.
-
-On September 6th, 2018, Michael Yonly contacted us and provided
-proof-of-concept code that allowed a remote attacker to create an
-authenticated, one-way connection with a node, and also that there was a
-possibility for a man-in-the-middle to force UDP packets from a node to be sent
-in plaintext. The first issue was trivial to exploit on tinc versions prior to
-1.0.30, but the changes in 1.0.30 to mitigate the Sweet32 attack made this
-weakness much harder to exploit. These issues have been fixed in tinc 1.0.35.
-The new protocol in the tinc 1.1 branch is not susceptible to these issues.
-
-Cryptography is a hard thing to get right. We cannot make any
-guarantees. Time, review and feedback are the only things that can
-prove the security of any cryptographic product. If you wish to review
-tinc or give us feedback, you are strongly encouraged to do so.
 
 
 Compatibility
 -------------
 
-Version 1.0.35 is compatible with 1.0pre8, 1.0 and later, but not with older
+Version 1.1pre2 is compatible with 1.0pre8, 1.0 and later, but not with older
-versions of tinc. Note that since version 1.0.30, tinc requires all nodes in
+versions of tinc.
-the VPN to be compiled with a version of LibreSSL or OpenSSL that supports the
+
-AES256 and SHA256 algorithms.
+When the ExperimentalProtocol option is used, tinc is still compatible with
+1.0.X and 1.1pre2 itself, but not with any other 1.1preX version.
 
 
 Requirements
 ------------
 
-The OpenSSL library is used for all cryptographic functions. You can find it at
+Either OpenSSL (http://www.openssl.org/) or libgcrypt
-https://www.openssl.org/. You will need version 1.0.1 or later with support for
+(http://www.gnupg.org/download/#libgcrypt).
-AES256 and SHA256 enabled. If this library is not installed on your system, the
-configure script will fail.  The manual in doc/tinc.texi contains more detailed
-information on how to install this library. Alternatively, you may also use the
-LibreSSL library.
 
-The zlib library is used for optional compression. You can
+The zlib library is used for optional compression. You can find it at
-find it at https://zlib.net/. Because of a possible exploit in
+http://www.gzip.org/zlib/.
-earlier versions we recommend that you download version 1.1.4 or later.
 
-The LZO library is also used for optional compression. You can
+The lzo library is also used for optional compression. You can find it at
-find it at https://www.oberhumer.com/opensource/lzo/.
+http://www.oberhumer.com/opensource/lzo/.
 
-In order to compile tinc, you will need a C99 compliant compiler.
+Since 1.1, the libevent library is used for the main event loop. You can find
+it at http://monkey.org/~provos/libevent/.
+
+In order to compile tinc, you will need a GNU C compiler environment. Please
+ensure you have the latest stable versions of all the required libraries.
 
 
 Features
@@ -112,14 +89,14 @@ Linux, FreeBSD and Windows.
 The algorithms used for encryption and generating message authentication codes
 can now be changed in the configuration files. All cipher and digest algorithms
 supported by OpenSSL can be used. Useful ciphers are "blowfish" (default),
-"bf-ofb", "des", "des3", et cetera. Useful digests are "sha1" (default), "md5",
+"bf-ofb", "des", "des3", etcetera. Useful digests are "sha1" (default), "md5",
-et cetera.
+etcetera.
 
 Support for routing IPv6 packets has been added. Just add Subnet lines with
 IPv6 addresses (without using :: abbreviations) and use ifconfig or ip (from
 the iproute package) to give the virtual network interface corresponding IPv6
-addresses. tinc does not provide autoconfiguration for IPv6 hosts. Consider
+addresses. tinc does not provide autoconfiguration for IPv6 hosts, if you need
-using radvd or zebra if you need it.
+it use radvd or zebra.
 
 It is also possible to make tunnels to other tinc daemons over IPv6 networks,
 if the operating system supports IPv6.  tinc will automatically use both IPv6
@@ -127,7 +104,7 @@ and IPv4 when available, but this can be changed by adding the option
 "AddressFamily = ipv4" or "AddressFamily = ipv6" to the tinc.conf file.
 
 Normally, when started tinc will detach and run in the background. In a native
-Windows environment this means tinc will install itself as a service, which will
+Windows environment this means tinc will intall itself as a service, which will
 restart after reboots.  To prevent tinc from detaching or running as a service,
 use the -D option.
 

README.android

@@ -1,25 +0,0 @@
-Quick how-to cross compile tinc for android (done from $HOME/android/):
-
-- Download android NDK and setup local ARM toolchain:
-wget http://dl.google.com/android/ndk/android-ndk-r9d-linux-x86.tar.bz2
-tar xfj android-ndk-r9d-linux-x86.tar.bz2
-./android-ndk-r9d/build/tools/make-standalone-toolchain.sh --platform=android-5 --install-dir=/tmp/my-android-toolchain
-
-- Download and cross-compile openSSL for ARM:
-wget http://www.openssl.org/source/openssl-1.0.1h.tar.gz
-tar xfz openssl-1.0.1h.tar.gz
-cd openssl-1.0.1h
-./Configure dist
-make CC=/tmp/my-android-toolchain/bin/arm-linux-androideabi-gcc AR="/tmp/my-android-toolchain/bin/arm-linux-androideabi-ar r" RANLIB=/tmp/my-android-toolchain/bin/arm-linux-androideabi-ranlib
-cd -
-
-- Clone and cross-compile tinc:
-git clone git://tinc-vpn.org/tinc
-cd tinc
-autoreconf -fsi
-CC=/tmp/my-android-toolchain/bin/arm-linux-androideabi-gcc ./configure --host=arm-linux --disable-lzo --with-openssl-lib=$HOME/android/openssl-1.0.1g --with-openssl-include=$HOME/android/openssl-1.0.1g/include/ --disable-hardening
-make -j5
-
-- Strip tincd binary to make it smaller
-/tmp/my-android-toolchain/bin/arm-linux-androideabi-strip src/tincd
-

THANKS

@@ -1,120 +1,49 @@
 We would like to thank the following people for their contributions to tinc:
 
 * Alexander Reil and Gemeinde Berg
-* Alexander Ried
-* Alexis Hildebrandt
 * Allesandro Gatti
 * Andreas van Cranenburgh
-* Andrew Hahn
-* Anthony G. Basile
 * Armijn Hemel
-* Armin Fisslthaler
-* Aron Cowan
-* Ashish Bajaj
-* Baptiste Jonglez
-* Borg
 * Brandon Black
-* Cheng LI
 * Cris van Pelt
-* Darius Jahandarie
-* Dato Simó
-* David Pflug
 * Delf Eldkraft
-* Dennis Joachimsthaler
 * dnk
-* Élie Bouttier
 * Enrique Zanardi
-* Erik Tews
-* Etienne Dechamps
-* Florent Clairambault
-* Florian Forster
-* Florian Klink
-* Florian Weik
 * Flynn Marquardt
-* Franz Pletz
-* Gary Kessler and Claudia Gonzalez
 * Grzegorz Dymarek
-* Gusariev Oleksandr
 * Hans Bayle
-* Harvest
 * Ivo van Dong
-* Ivo Smits
-* James Cook
 * James MacLean
 * Jamie Briggs
 * Jason Harper
-* Jason Livesay
-* Jasper Krijgsman
-* Jelle de Jong
-* Jeroen Domburg
 * Jeroen Ubbink
 * Jerome Etienne
-* Jo-Philipp Wich
-* Jochen Voss
 * Julien Muchembled
-* Lavrans Laading
-* Loïc Dachary
 * Loïc Grenié
 * Lubomír Bulej
-* luckyhacky
-* LunarShaddow
 * Mads Kiilerich
 * Marc A. Lehmann
 * Mark Glines
-* Mark Petryk
 * Markus Goetz
 * Martin Kihlgren
-* Martin Schobert
-* Martin Schürrer
-* Martin Weinelt
 * Matias Carrasco
 * Max Rijevski
 * Menno Smits
-* Mesar Hameed
 * Michael Tokarev
-* Michael Yonli
 * Miles Nordin
-* Nathan Stratton Treadway
-* Murat Donmez
-* Nick Hibma
 * Nick Patavalis
 * Paul Littlefield
-* Philipp Babel
-* Pierre Emeriaud
-* Pierre-Olivier Mercier
-* Rafael Sadowski
-* Rafał Leśniak
-* Rhosyn Celyn
 * Robert van der Meulen
 * Rumko
-* Ryan Miller
-* Sam Bryan
-* Samuel Thibault
-* Saverio Proto
 * Scott Lamb
-* Steffan Karger
-* Stig Fagrell
 * Sven-Haegar Koch
 * Teemu Kiviniemi
-* Thomas Tsiakalakis
 * Timothy Redaelli
-* Tomasz Fortuna
-* Tomislav Čohar
-* Tommy Arnkværn
 * Tonnerre Lombard
-* Ulrich Seifert
-* Vil Brekin
-* Vittorio Gambaletta
-* Wendy Willard
 * Wessel Dankers
-* William A. Kennington III
-* William McArthur
 * Wouter van Heyst
-* xentec
-* 戴 鸣
 
-And everyone we forgot (if we did, please let us know). Thank you!
+And everyone we forgot. Thank you!
 
----
+Ivo Timmermans
-Ivo Timmermans,
+Guus Sliepen
-Guus Sliepen.

compile

@@ -1,348 +0,0 @@
-#! /bin/sh
-# Wrapper for compilers which do not understand '-c -o'.
-
-scriptversion=2018-03-07.03; # UTC
-
-# Copyright (C) 1999-2018 Free Software Foundation, Inc.
-# Written by Tom Tromey <tromey@cygnus.com>.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <https://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# This file is maintained in Automake, please report
-# bugs to <bug-automake@gnu.org> or send patches to
-# <automake-patches@gnu.org>.
-
-nl='
-'
-
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent tools from complaining about whitespace usage.
-IFS=" ""	$nl"
-
-file_conv=
-
-# func_file_conv build_file lazy
-# Convert a $build file to $host form and store it in $file
-# Currently only supports Windows hosts. If the determined conversion
-# type is listed in (the comma separated) LAZY, no conversion will
-# take place.
-func_file_conv ()
-{
-  file=$1
-  case $file in
-    / | /[!/]*) # absolute file, and not a UNC file
-      if test -z "$file_conv"; then
-	# lazily determine how to convert abs files
-	case `uname -s` in
-	  MINGW*)
-	    file_conv=mingw
-	    ;;
-	  CYGWIN*)
-	    file_conv=cygwin
-	    ;;
-	  *)
-	    file_conv=wine
-	    ;;
-	esac
-      fi
-      case $file_conv/,$2, in
-	*,$file_conv,*)
-	  ;;
-	mingw/*)
-	  file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
-	  ;;
-	cygwin/*)
-	  file=`cygpath -m "$file" || echo "$file"`
-	  ;;
-	wine/*)
-	  file=`winepath -w "$file" || echo "$file"`
-	  ;;
-      esac
-      ;;
-  esac
-}
-
-# func_cl_dashL linkdir
-# Make cl look for libraries in LINKDIR
-func_cl_dashL ()
-{
-  func_file_conv "$1"
-  if test -z "$lib_path"; then
-    lib_path=$file
-  else
-    lib_path="$lib_path;$file"
-  fi
-  linker_opts="$linker_opts -LIBPATH:$file"
-}
-
-# func_cl_dashl library
-# Do a library search-path lookup for cl
-func_cl_dashl ()
-{
-  lib=$1
-  found=no
-  save_IFS=$IFS
-  IFS=';'
-  for dir in $lib_path $LIB
-  do
-    IFS=$save_IFS
-    if $shared && test -f "$dir/$lib.dll.lib"; then
-      found=yes
-      lib=$dir/$lib.dll.lib
-      break
-    fi
-    if test -f "$dir/$lib.lib"; then
-      found=yes
-      lib=$dir/$lib.lib
-      break
-    fi
-    if test -f "$dir/lib$lib.a"; then
-      found=yes
-      lib=$dir/lib$lib.a
-      break
-    fi
-  done
-  IFS=$save_IFS
-
-  if test "$found" != yes; then
-    lib=$lib.lib
-  fi
-}
-
-# func_cl_wrapper cl arg...
-# Adjust compile command to suit cl
-func_cl_wrapper ()
-{
-  # Assume a capable shell
-  lib_path=
-  shared=:
-  linker_opts=
-  for arg
-  do
-    if test -n "$eat"; then
-      eat=
-    else
-      case $1 in
-	-o)
-	  # configure might choose to run compile as 'compile cc -o foo foo.c'.
-	  eat=1
-	  case $2 in
-	    *.o | *.[oO][bB][jJ])
-	      func_file_conv "$2"
-	      set x "$@" -Fo"$file"
-	      shift
-	      ;;
-	    *)
-	      func_file_conv "$2"
-	      set x "$@" -Fe"$file"
-	      shift
-	      ;;
-	  esac
-	  ;;
-	-I)
-	  eat=1
-	  func_file_conv "$2" mingw
-	  set x "$@" -I"$file"
-	  shift
-	  ;;
-	-I*)
-	  func_file_conv "${1#-I}" mingw
-	  set x "$@" -I"$file"
-	  shift
-	  ;;
-	-l)
-	  eat=1
-	  func_cl_dashl "$2"
-	  set x "$@" "$lib"
-	  shift
-	  ;;
-	-l*)
-	  func_cl_dashl "${1#-l}"
-	  set x "$@" "$lib"
-	  shift
-	  ;;
-	-L)
-	  eat=1
-	  func_cl_dashL "$2"
-	  ;;
-	-L*)
-	  func_cl_dashL "${1#-L}"
-	  ;;
-	-static)
-	  shared=false
-	  ;;
-	-Wl,*)
-	  arg=${1#-Wl,}
-	  save_ifs="$IFS"; IFS=','
-	  for flag in $arg; do
-	    IFS="$save_ifs"
-	    linker_opts="$linker_opts $flag"
-	  done
-	  IFS="$save_ifs"
-	  ;;
-	-Xlinker)
-	  eat=1
-	  linker_opts="$linker_opts $2"
-	  ;;
-	-*)
-	  set x "$@" "$1"
-	  shift
-	  ;;
-	*.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
-	  func_file_conv "$1"
-	  set x "$@" -Tp"$file"
-	  shift
-	  ;;
-	*.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
-	  func_file_conv "$1" mingw
-	  set x "$@" "$file"
-	  shift
-	  ;;
-	*)
-	  set x "$@" "$1"
-	  shift
-	  ;;
-      esac
-    fi
-    shift
-  done
-  if test -n "$linker_opts"; then
-    linker_opts="-link$linker_opts"
-  fi
-  exec "$@" $linker_opts
-  exit 1
-}
-
-eat=
-
-case $1 in
-  '')
-     echo "$0: No command.  Try '$0 --help' for more information." 1>&2
-     exit 1;
-     ;;
-  -h | --h*)
-    cat <<\EOF
-Usage: compile [--help] [--version] PROGRAM [ARGS]
-
-Wrapper for compilers which do not understand '-c -o'.
-Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
-arguments, and rename the output as expected.
-
-If you are trying to build a whole package this is not the
-right script to run: please start by reading the file 'INSTALL'.
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
-    exit $?
-    ;;
-  -v | --v*)
-    echo "compile $scriptversion"
-    exit $?
-    ;;
-  cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \
-  icl | *[/\\]icl | icl.exe | *[/\\]icl.exe )
-    func_cl_wrapper "$@"      # Doesn't return...
-    ;;
-esac
-
-ofile=
-cfile=
-
-for arg
-do
-  if test -n "$eat"; then
-    eat=
-  else
-    case $1 in
-      -o)
-	# configure might choose to run compile as 'compile cc -o foo foo.c'.
-	# So we strip '-o arg' only if arg is an object.
-	eat=1
-	case $2 in
-	  *.o | *.obj)
-	    ofile=$2
-	    ;;
-	  *)
-	    set x "$@" -o "$2"
-	    shift
-	    ;;
-	esac
-	;;
-      *.c)
-	cfile=$1
-	set x "$@" "$1"
-	shift
-	;;
-      *)
-	set x "$@" "$1"
-	shift
-	;;
-    esac
-  fi
-  shift
-done
-
-if test -z "$ofile" || test -z "$cfile"; then
-  # If no '-o' option was seen then we might have been invoked from a
-  # pattern rule where we don't need one.  That is ok -- this is a
-  # normal compilation that the losing compiler can handle.  If no
-  # '.c' file was seen then we are probably linking.  That is also
-  # ok.
-  exec "$@"
-fi
-
-# Name of file we expect compiler to create.
-cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
-
-# Create the lock directory.
-# Note: use '[/\\:.-]' here to ensure that we don't use the same name
-# that we are using for the .o file.  Also, base the name on the expected
-# object file name, since that is what matters with a parallel build.
-lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
-while true; do
-  if mkdir "$lockdir" >/dev/null 2>&1; then
-    break
-  fi
-  sleep 1
-done
-# FIXME: race condition here if user kills between mkdir and trap.
-trap "rmdir '$lockdir'; exit 1" 1 2 15
-
-# Run the compile.
-"$@"
-ret=$?
-
-if test -f "$cofile"; then
-  test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
-elif test -f "${cofile}bj"; then
-  test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
-fi
-
-rmdir "$lockdir"
-exit $ret
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'before-save-hook 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC0"
-# time-stamp-end: "; # UTC"
-# End:

config.h.in

@@ -1,4 +1,4 @@
-/* config.h.in.  Generated from configure.ac by autoheader.  */
+/* config.h.in.  Generated from configure.in by autoheader.  */
 
 /* Support for jumbograms (packets up to 9000 bytes) */
 #undef ENABLE_JUMBOGRAMS
@@ -6,27 +6,21 @@
 /* Support for tunemu */
 #undef ENABLE_TUNEMU
 
-/* Support for UML */
-#undef ENABLE_UML
-
-/* Support for VDE */
-#undef ENABLE_VDE
-
 /* Define to 1 if you have the <arpa/inet.h> header file. */
 #undef HAVE_ARPA_INET_H
 
-/* Define to 1 if you have the <arpa/nameser.h> header file. */
-#undef HAVE_ARPA_NAMESER_H
-
 /* Define to 1 if you have the `asprintf' function. */
 #undef HAVE_ASPRINTF
 
-/* Define to 1 if you have the `BN_GENCB_new' function. */
-#undef HAVE_BN_GENCB_NEW
-
 /* Unknown BSD variant */
 #undef HAVE_BSD
 
+/* have curses support */
+#undef HAVE_CURSES
+
+/* Define to 1 if you have the <curses.h> header file. */
+#undef HAVE_CURSES_H
+
 /* Cygwin */
 #undef HAVE_CYGWIN
 
@@ -36,10 +30,6 @@
 /* Darwin (MacOS/X) */
 #undef HAVE_DARWIN
 
-/* Define to 1 if you have the declaration of `EVP_aes_256_cfb', and to 0 if
-   you don't. */
-#undef HAVE_DECL_EVP_AES_256_CFB
-
 /* Define to 1 if you have the declaration of `freeaddrinfo', and to 0 if you
    don't. */
 #undef HAVE_DECL_FREEADDRINFO
@@ -56,25 +46,14 @@
    don't. */
 #undef HAVE_DECL_GETNAMEINFO
 
-/* Define to 1 if you have the declaration of `OpenSSL_add_all_algorithms',
-   and to 0 if you don't. */
-#undef HAVE_DECL_OPENSSL_ADD_ALL_ALGORITHMS
-
-/* Define to 1 if you have the declaration of `res_init', and to 0 if you
-   don't. */
-#undef HAVE_DECL_RES_INIT
-
-/* Define to 1 if you have the `devname' function. */
-#undef HAVE_DEVNAME
-
 /* Define to 1 if you have the <dirent.h> header file. */
 #undef HAVE_DIRENT_H
 
 /* DragonFly */
 #undef HAVE_DRAGONFLY
 
-/* Define to 1 if you have the `EVP_CIPHER_CTX_new' function. */
+/* Define to 1 if you have the <event.h> header file. */
-#undef HAVE_EVP_CIPHER_CTX_NEW
+#undef HAVE_EVENT_H
 
 /* Define to 1 if you have the `EVP_EncryptInit_ex' function. */
 #undef HAVE_EVP_ENCRYPTINIT_EX
@@ -82,9 +61,6 @@
 /* Define to 1 if you have the `fchmod' function. */
 #undef HAVE_FCHMOD
 
-/* Define to 1 if you have the `fdevname' function. */
-#undef HAVE_FDEVNAME
-
 /* Define to 1 if you have the `flock' function. */
 #undef HAVE_FLOCK
 
@@ -94,30 +70,24 @@
 /* FreeBSD */
 #undef HAVE_FREEBSD
 
-/* Define to 1 if you have the <getopt.h> header file. */
+/* Define to 1 if you have the `ftime' function. */
-#undef HAVE_GETOPT_H
+#undef HAVE_FTIME
-
-/* getopt_long() */
-#undef HAVE_GETOPT_LONG
 
 /* Define to 1 if you have the `gettimeofday' function. */
 #undef HAVE_GETTIMEOFDAY
 
+/* Define to 1 if you have the `get_current_dir_name' function. */
+#undef HAVE_GET_CURRENT_DIR_NAME
+
 /* Define to 1 if you have the <inttypes.h> header file. */
 #undef HAVE_INTTYPES_H
 
 /* Define to 1 if you have the `nsl' library (-lnsl). */
 #undef HAVE_LIBNSL
 
-/* Define to 1 if you have the `resolv' library (-lresolv). */
-#undef HAVE_LIBRESOLV
-
 /* Define to 1 if you have the `socket' library (-lsocket). */
 #undef HAVE_LIBSOCKET
 
-/* Define to 1 if you have the <libvdeplug_dyn.h> header file. */
-#undef HAVE_LIBVDEPLUG_DYN_H
-
 /* Linux */
 #undef HAVE_LINUX
 
@@ -178,9 +148,6 @@
 /* Define to 1 if you have the <netinet/tcp.h> header file. */
 #undef HAVE_NETINET_TCP_H
 
-/* Define to 1 if you have the <netpacket/packet.h> header file. */
-#undef HAVE_NETPACKET_PACKET_H
-
 /* Define to 1 if you have the <net/ethernet.h> header file. */
 #undef HAVE_NET_ETHERNET_H
 
@@ -199,9 +166,6 @@
 /* Define to 1 if you have the <net/if_types.h> header file. */
 #undef HAVE_NET_IF_TYPES_H
 
-/* Define to 1 if you have the <net/if_utun.h> header file. */
-#undef HAVE_NET_IF_UTUN_H
-
 /* Define to 1 if you have the <net/tap/if_tap.h> header file. */
 #undef HAVE_NET_TAP_IF_TAP_H
 
@@ -232,20 +196,17 @@
 /* Define to 1 if you have the <openssl/sha.h> header file. */
 #undef HAVE_OPENSSL_SHA_H
 
-/* Define to 1 if you have the `pselect' function. */
-#undef HAVE_PSELECT
-
 /* Define to 1 if you have the `putenv' function. */
 #undef HAVE_PUTENV
 
-/* Define to 1 if you have the `RAND_bytes' function. */
+/* Define to 1 if you have the `random' function. */
-#undef HAVE_RAND_BYTES
+#undef HAVE_RANDOM
 
-/* Define to 1 if you have the <resolv.h> header file. */
+/* Define to 1 if you have the `RAND_pseudo_bytes' function. */
-#undef HAVE_RESOLV_H
+#undef HAVE_RAND_PSEUDO_BYTES
 
-/* Define to 1 if you have the `RSA_set0_key' function. */
+/* Define to 1 if you have the `select' function. */
-#undef HAVE_RSA_SET0_KEY
+#undef HAVE_SELECT
 
 /* Define to 1 if the system has the type `socklen_t'. */
 #undef HAVE_SOCKLEN_T
@@ -253,12 +214,21 @@
 /* Solaris/SunOS */
 #undef HAVE_SOLARIS
 
+/* Define to 1 if you have the <stdbool.h> header file. */
+#undef HAVE_STDBOOL_H
+
 /* Define to 1 if you have the <stdint.h> header file. */
 #undef HAVE_STDINT_H
 
 /* Define to 1 if you have the <stdlib.h> header file. */
 #undef HAVE_STDLIB_H
 
+/* Define to 1 if you have the `strdup' function. */
+#undef HAVE_STRDUP
+
+/* Define to 1 if you have the `strerror' function. */
+#undef HAVE_STRERROR
+
 /* Define to 1 if you have the <strings.h> header file. */
 #undef HAVE_STRINGS_H
 
@@ -268,6 +238,9 @@
 /* Define to 1 if you have the `strsignal' function. */
 #undef HAVE_STRSIGNAL
 
+/* Define to 1 if you have the `strtol' function. */
+#undef HAVE_STRTOL
+
 /* Define to 1 if the system has the type `struct addrinfo'. */
 #undef HAVE_STRUCT_ADDRINFO
 
@@ -343,9 +316,18 @@
 /* Define to 1 if you have the <sys/uio.h> header file. */
 #undef HAVE_SYS_UIO_H
 
+/* Define to 1 if you have the <sys/un.h> header file. */
+#undef HAVE_SYS_UN_H
+
 /* Define to 1 if you have the <sys/wait.h> header file. */
 #undef HAVE_SYS_WAIT_H
 
+/* Define to 1 if you have the `time' function. */
+#undef HAVE_TIME
+
+/* Define to 1 if you have the <time.h> header file. */
+#undef HAVE_TIME_H
+
 /* Define to 1 if you have the <unistd.h> header file. */
 #undef HAVE_UNISTD_H
 
@@ -358,6 +340,9 @@
 /* Define to 1 if you have the `vsyslog' function. */
 #undef HAVE_VSYSLOG
 
+/* Define to 1 if you have the `writev' function. */
+#undef HAVE_WRITEV
+
 /* have zlib compression support */
 #undef HAVE_ZLIB
 
@@ -394,6 +379,12 @@
 /* Define to 1 if you have the ANSI C header files. */
 #undef STDC_HEADERS
 
+/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
+#undef TIME_WITH_SYS_TIME
+
+/* Define to 1 if your <sys/time.h> declares `struct tm'. */
+#undef TM_IN_SYS_TIME
+
 /* Enable extensions on AIX 3, Interix.  */
 #ifndef _ALL_SOURCE
 # undef _ALL_SOURCE
@@ -438,5 +429,15 @@
 /* Defined if the __malloc__ attribute is not supported. */
 #undef __malloc__
 
+/* Define to empty if `const' does not conform to ANSI C. */
+#undef const
+
 /* Define to `int' if <sys/types.h> does not define. */
 #undef pid_t
+
+/* Define to `unsigned int' if <sys/types.h> does not define. */
+#undef size_t
+
+/* Define to empty if the keyword `volatile' does not work. Warning: valid
+   code using `volatile' can become incorrect without. Disable with care. */
+#undef volatile

configure.ac

@@ -1,247 +0,0 @@
-dnl Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.61)
-AC_INIT([tinc], [1.0.35])
-AC_CONFIG_SRCDIR([src/tincd.c])
-AM_INIT_AUTOMAKE([1.11 check-news std-options subdir-objects nostdinc silent-rules -Wall])
-AC_CONFIG_HEADERS([config.h])
-AC_CONFIG_MACRO_DIR([m4])
-AM_SILENT_RULES([yes])
-
-# Enable GNU extensions.
-# Define this here, not in acconfig's @TOP@ section, since definitions
-# in the latter don't make it into the configure-time tests.
-AC_GNU_SOURCE
-AC_DEFINE([__USE_BSD], 1, [Enable BSD extensions])
-
-dnl Checks for programs.
-AC_PROG_CC_C99
-AC_PROG_CPP
-AC_PROG_INSTALL
-
-AM_PROG_CC_C_O
-
-dnl Check and set OS
-
-AC_CANONICAL_HOST
-
-case $host_os in
-  *linux*)
-    linux=true
-    AC_DEFINE(HAVE_LINUX, 1, [Linux])
-  ;;
-  *freebsd*)
-    bsd=true
-    AC_DEFINE(HAVE_FREEBSD, 1, [FreeBSD])
-  ;;
-  *darwin*)
-    bsd=true
-    AC_DEFINE(HAVE_DARWIN, 1, [Darwin (MacOS/X)])
-  ;;
-  *solaris*)
-    solaris=true
-    AC_DEFINE(HAVE_SOLARIS, 1, [Solaris/SunOS])
-  ;;
-  *openbsd*)
-    bsd=true
-    AC_DEFINE(HAVE_OPENBSD, 1, [OpenBSD])
-  ;;
-  *netbsd*)
-    bsd=true
-    AC_DEFINE(HAVE_NETBSD, 1, [NetBSD])
-  ;;
-  *dragonfly*)
-    bsd=true
-    AC_DEFINE(HAVE_DRAGONFLY, 1, [DragonFly])
-  ;;
-  *bsd*)
-    bsd=true
-    AC_MSG_WARN("Unknown BSD variant, tinc might not compile or work!")
-    AC_DEFINE(HAVE_BSD, 1, [Unknown BSD variant])
-  ;;
-  *cygwin*)
-    cygwin=true
-    AC_DEFINE(HAVE_CYGWIN, 1, [Cygwin])
-  ;;
-  *mingw*)
-    mingw=true
-    AC_DEFINE(HAVE_MINGW, 1, [MinGW])
-    LIBS="$LIBS -lws2_32 -lgdi32 -lcrypt32"
-  ;;
-  *)
-    AC_MSG_ERROR("Unknown operating system.")
-  ;;
-esac
-
-AC_ARG_ENABLE(uml,
-  AS_HELP_STRING([--enable-uml], [enable support for User Mode Linux]),
-  [ AS_IF([test "x$enable_uml" = "xyes"],
-      [ AC_DEFINE(ENABLE_UML, 1, [Support for UML])
-        uml=true
-      ],
-      [uml=false])
-  ],
-  [uml=false]
-)
-
-AC_ARG_ENABLE(vde,
-  AS_HELP_STRING([--enable-vde], [enable support for Virtual Distributed Ethernet]),
-  [ AS_IF([test "x$enable_vde" = "xyes"],
-      [ AC_CHECK_HEADERS(libvdeplug_dyn.h, [], [AC_MSG_ERROR([VDE plug header files not found.]); break])
-        AC_DEFINE(ENABLE_VDE, 1, [Support for VDE])
-        vde=true
-      ],
-      [vde=false])
-  ],
-  [vde=false]
-)
-
-AC_ARG_ENABLE(tunemu,
-  AS_HELP_STRING([--enable-tunemu], [enable support for the tunemu driver]),
-  [ AS_IF([test "x$enable_tunemu" = "xyes"],
-      [ AC_DEFINE(ENABLE_TUNEMU, 1, [Support for tunemu])
-        tunemu=true
-      ],
-      [tunemu=false])
-  ],
-  [tunemu=false]
-)
-
-AC_ARG_WITH(windows2000,
-  AS_HELP_STRING([--with-windows2000], [compile with support for Windows 2000. This disables support for tunneling over existing IPv6 networks.]),
-  [ AS_IF([test "x$with_windows2000" = "xyes"],
-      [AC_DEFINE(WITH_WINDOWS2000, 1, [Compile with support for Windows 2000])])
-  ]
-)
-
-AC_ARG_WITH(systemd,
-  AS_HELP_STRING([--with-systemd@<:@=DIR@:>@], [install systemd service files @<:@to DIR if specified@:>@]),
-  [ systemd=true; systemd_path="$with_systemd" ],
-  [ systemd=false ]
-)
-
-AS_IF([test "x$with_systemd" = "xyes"], [systemd_path="\${libdir}/systemd/system"],
-      [AS_IF([test "x$with_systemd" = "xno"], [systemd=false])])
-
-AC_SUBST(systemd_path, $systemd_path)
-
-AM_CONDITIONAL(LINUX, test "$linux" = true)
-AM_CONDITIONAL(BSD, test "$bsd" = true)
-AM_CONDITIONAL(SOLARIS, test "$solaris" = true)
-AM_CONDITIONAL(MINGW, test "$mingw" = true)
-AM_CONDITIONAL(CYGWIN, test "$cygwin" = true)
-AM_CONDITIONAL(UML, test "$uml" = true)
-AM_CONDITIONAL(VDE, test "$vde" = true)
-AM_CONDITIONAL(TUNEMU, test "$tunemu" = true)
-AM_CONDITIONAL(WITH_SYSTEMD, test "$systemd" = true)
-
-AC_CACHE_SAVE
-
-if test -d /sw/include ; then
-  CPPFLAGS="$CPPFLAGS -I/sw/include"
-fi
-if test -d /sw/lib ; then
-  LIBS="$LIBS -L/sw/lib"
-fi
-
-dnl Compiler hardening flags
-dnl No -fstack-protector-all because it doesn't work on all platforms or architectures.
-
-AX_CFLAGS_WARN_ALL(CFLAGS)
-
-AC_ARG_ENABLE([hardening], AS_HELP_STRING([--disable-hardening], [disable compiler and linker hardening flags]))
-AS_IF([test "x$enable_hardening" != "xno"],
-  [AX_CHECK_COMPILE_FLAG([-DFORTIFY_SOURCE=2], [CPPFLAGS="$CPPFLAGS -DFORTIFY_SOURCE=2"])
-   AX_CHECK_COMPILE_FLAG([-fwrapv], [CPPFLAGS="$CPPFLAGS -fwrapv"],
-   AX_CHECK_COMPILE_FLAG([-fno-strict-overflow], [CPPFLAGS="$CPPFLAGS -fno-strict-overflow"]))
-   case $host_os in
-     *mingw*)
-       AX_CHECK_LINK_FLAG([-Wl,--dynamicbase], [LDFLAGS="$LDFLAGS -Wl,--dynamicbase"])
-       AX_CHECK_LINK_FLAG([-Wl,--nxcompat], [LDFLAGS="$LDFLAGS -Wl,--nxcompat"])
-       ;;
-     *)
-       AX_CHECK_COMPILE_FLAG([-fPIE], [CPPFLAGS="$CPPFLAGS -fPIE"])
-       AX_CHECK_LINK_FLAG([-pie], [LDFLAGS="$LDFLAGS -pie"])
-       ;;
-   esac
-   AX_CHECK_LINK_FLAG([-Wl,-z,relro], [LDFLAGS="$LDFLAGS -Wl,-z,relro"])
-   AX_CHECK_LINK_FLAG([-Wl,-z,now], [LDFLAGS="$LDFLAGS -Wl,-z,now"])
-  ]
-);
-
-dnl Checks for libraries.
-
-dnl Checks for header files.
-dnl We do this in multiple stages, because unlike Linux all the other operating systems really suck and don't include their own dependencies.
-
-AC_CHECK_HEADERS([syslog.h sys/file.h sys/ioctl.h sys/mman.h sys/param.h sys/resource.h sys/socket.h sys/time.h sys/uio.h sys/wait.h netdb.h arpa/inet.h arpa/nameser.h dirent.h getopt.h])
-AC_CHECK_HEADERS([net/if.h net/if_types.h linux/if_tun.h net/if_tun.h net/if_utun.h net/tun/if_tun.h net/if_tap.h net/tap/if_tap.h net/ethernet.h net/if_arp.h netinet/in_systm.h netinet/in.h netinet/in6.h netpacket/packet.h],
-  [], [], [#include "$srcdir/src/have.h"]
-)
-AC_CHECK_HEADERS([netinet/if_ether.h netinet/ip.h netinet/ip6.h resolv.h],
-  [], [], [#include "$srcdir/src/have.h"]
-)
-AC_CHECK_HEADERS([netinet/tcp.h netinet/ip_icmp.h netinet/icmp6.h],
-  [], [], [#include "$srcdir/src/have.h"]
-)
-
-dnl Checks for typedefs, structures, and compiler characteristics.
-AC_TYPE_PID_T
-
-tinc_ATTRIBUTE(__malloc__)
-
-AC_CHECK_TYPES([socklen_t, struct ether_header, struct arphdr, struct ether_arp, struct in_addr, struct addrinfo, struct ip, struct icmp, struct in6_addr, struct sockaddr_in6, struct ip6_hdr, struct icmp6_hdr, struct nd_neighbor_solicit, struct nd_opt_hdr], , ,
-  [#include "$srcdir/src/have.h"]
-)
-
-dnl Checks for library functions.
-AC_TYPE_SIGNAL
-AC_CHECK_FUNCS([asprintf daemon fchmod flock fork gettimeofday mlockall pselect putenv strsignal system unsetenv usleep vsyslog devname fdevname],
-  [], [], [#include "$srcdir/src/have.h"]
-)
-
-AC_CHECK_FUNC(getopt_long, [getopt=true; AC_DEFINE(HAVE_GETOPT_LONG, 1, [getopt_long()])], [getopt=false])
-AM_CONDITIONAL(GETOPT, test "$getopt" = true)
-
-dnl Support for SunOS
-
-AC_CHECK_FUNC(socket, [], [
-  AC_CHECK_LIB(socket, connect)
-])
-AC_CHECK_FUNC(gethostbyname, [], [
-  AC_CHECK_LIB(nsl, gethostbyname)
-])
-
-AC_CHECK_DECLS([freeaddrinfo, gai_strerror, getaddrinfo, getnameinfo],
-  [], [], [#include "$srcdir/src/have.h"]
-)
-
-AC_CHECK_DECLS([res_init], [AC_CHECK_LIB(resolv, res_init)], [], [
-  #include <netinet/in.h>
-  #include <resolv.h>
-])
-
-AC_CACHE_SAVE
-
-dnl These are defined in files in m4/
-
-tinc_ZLIB
-tinc_LZO
-tinc_OPENSSL
-
-dnl Check if support for jumbograms is requested
-AC_ARG_ENABLE(jumbograms,
-  AS_HELP_STRING([--enable-jumbograms], [enable support for jumbograms (packets up to 9000 bytes)]),
-  [ AS_IF([test "x$enable_jumbograms" = "xyes"],
-      [ AC_DEFINE(ENABLE_JUMBOGRAMS, 1, [Support for jumbograms (packets up to 9000 bytes)]) ])
-  ]
-)
-
-dnl Ensure runstatedir is set if we are using a version of autoconf that does not suppport it
-if test "x$runstatedir" = "x"; then
-  AC_SUBST([runstatedir], ['${localstatedir}/run'])
-fi
-
-AC_CONFIG_FILES([Makefile src/Makefile doc/Makefile systemd/Makefile])
-
-AC_OUTPUT

configure.in

@@ -0,0 +1,177 @@
+dnl Process this file with autoconf to produce a configure script.
+
+AC_PREREQ(2.61)
+AC_INIT
+AC_CONFIG_SRCDIR([src/tincd.c])
+AC_GNU_SOURCE
+AM_INIT_AUTOMAKE(tinc, 1.1pre2)
+AC_CONFIG_HEADERS([config.h])
+AM_MAINTAINER_MODE
+
+# Enable GNU extensions.
+# Define this here, not in acconfig's @TOP@ section, since definitions
+# in the latter don't make it into the configure-time tests.
+AC_GNU_SOURCE
+AC_DEFINE([__USE_BSD], 1, [Enable BSD extensions])
+
+dnl Checks for programs.
+AC_PROG_CC_C99
+AC_PROG_CPP
+AC_PROG_INSTALL
+AC_PROG_LN_S
+AC_PROG_RANLIB
+
+dnl Check and set OS
+
+AC_CANONICAL_HOST
+
+case $host_os in
+  *linux*)
+    AC_DEFINE(HAVE_LINUX, 1, [Linux])
+    [ rm -f src/device.c; ln -sf linux/device.c src/device.c ]
+  ;;
+  *freebsd*)
+    AC_DEFINE(HAVE_FREEBSD, 1, [FreeBSD])
+    [ rm -f src/device.c; ln -sf bsd/device.c src/device.c ]
+  ;;
+  *darwin*)
+    AC_DEFINE(HAVE_DARWIN, 1, [Darwin (MacOS/X)])
+    [ rm -f src/device.c; ln -sf bsd/device.c src/device.c ]
+  ;;
+  *solaris*)
+    AC_DEFINE(HAVE_SOLARIS, 1, [Solaris/SunOS])
+    [ rm -f src/device.c; ln -sf solaris/device.c src/device.c ]
+  ;;
+  *openbsd*)
+    AC_DEFINE(HAVE_OPENBSD, 1, [OpenBSD])
+    [ rm -f src/device.c; ln -sf bsd/device.c src/device.c ]
+  ;;
+  *netbsd*)
+    AC_DEFINE(HAVE_NETBSD, 1, [NetBSD])
+    [ rm -f src/device.c; ln -sf bsd/device.c src/device.c ]
+  ;;
+  *dragonfly*)
+    AC_DEFINE(HAVE_DRAGONFLY, 1, [DragonFly])
+    [ rm -f src/device.c; ln -sf bsd/device.c src/device.c ]
+  ;;
+  *bsd*)
+    AC_MSG_WARN("Unknown BSD variant, tinc might not compile or work!")
+    AC_DEFINE(HAVE_BSD, 1, [Unknown BSD variant])
+    [ rm -f src/device.c; ln -sf bsd/device.c src/device.c ]
+  ;;
+  *cygwin*)
+    AC_DEFINE(HAVE_CYGWIN, 1, [Cygwin])
+    [ rm -f src/device.c; ln -sf cygwin/device.c src/device.c ]
+  ;;
+  *mingw*)
+    AC_DEFINE(HAVE_MINGW, 1, [MinGW])
+    [ rm -f src/device.c; cp -f src/mingw/device.c src/device.c ]
+    LIBS="$LIBS -lws2_32 -lgdi32 -lcrypt32"
+  ;;
+  *)
+    AC_MSG_ERROR("Unknown operating system.")
+  ;;
+esac
+
+AC_ARG_ENABLE(tunemu,
+  AS_HELP_STRING([--enable-tunemu], [enable support for the tunemu driver]),
+  [ AC_DEFINE(ENABLE_TUNEMU, 1, [Support for tunemu])
+    tunemu=true
+  ]
+)
+
+AC_ARG_WITH(windows2000,
+  AS_HELP_STRING([--with-windows2000], [compile with support for Windows 2000. This disables support for tunneling over existing IPv6 networks.]),
+  [AC_DEFINE(WITH_WINDOWS2000, 1, [Compile with support for Windows 2000])]
+)
+
+AM_CONDITIONAL(TUNEMU, test "$tunemu" = true)
+
+AC_CACHE_SAVE
+
+if test -d /sw/include ; then
+  CPPFLAGS="$CPPFLAGS -I/sw/include"
+fi
+if test -d /sw/lib ; then
+  LIBS="$LIBS -L/sw/lib"
+fi
+
+dnl Checks for header files.
+dnl We do this in multiple stages, because unlike Linux all the other operating systems really suck and don't include their own dependencies.
+
+AC_HEADER_STDC
+AC_CHECK_HEADERS([stdbool.h syslog.h sys/file.h sys/ioctl.h sys/mman.h sys/param.h sys/resource.h sys/socket.h sys/time.h sys/uio.h sys/un.h sys/wait.h netdb.h arpa/inet.h dirent.h])
+AC_CHECK_HEADERS([net/if.h net/if_types.h linux/if_tun.h net/if_tun.h net/tun/if_tun.h net/if_tap.h net/tap/if_tap.h net/ethernet.h net/if_arp.h netinet/in_systm.h netinet/in.h netinet/in6.h time.h],
+  [], [], [#include "have.h"]
+)
+AC_CHECK_HEADERS([netinet/if_ether.h netinet/ip.h netinet/ip6.h],
+  [], [], [#include "have.h"]
+)
+AC_CHECK_HEADERS([netinet/tcp.h netinet/ip_icmp.h netinet/icmp6.h],
+  [], [], [#include "have.h"]
+)
+
+dnl Checks for typedefs, structures, and compiler characteristics.
+AC_C_CONST
+AC_C_VOLATILE
+AC_TYPE_PID_T
+AC_TYPE_SIZE_T
+AC_HEADER_TIME
+AC_STRUCT_TM
+
+tinc_ATTRIBUTE(__malloc__)
+
+AC_CHECK_TYPES([socklen_t, struct ether_header, struct arphdr, struct ether_arp, struct in_addr, struct addrinfo, struct ip, struct icmp, struct in6_addr, struct sockaddr_in6, struct ip6_hdr, struct icmp6_hdr, struct nd_neighbor_solicit, struct nd_opt_hdr], , ,
+  [#include "have.h"]
+)
+
+dnl Checks for library functions.
+AC_TYPE_SIGNAL
+AC_CHECK_FUNCS([asprintf daemon fchmod flock ftime fork get_current_dir_name gettimeofday mlockall putenv random select strdup strerror strsignal strtol system time usleep unsetenv vsyslog writev],
+  [], [], [#include "have.h"]
+)
+
+dnl Support for SunOS
+
+AC_CHECK_FUNC(socket, [], [
+  AC_CHECK_LIB(socket, connect)
+])
+AC_CHECK_FUNC(gethostbyname, [], [
+  AC_CHECK_LIB(nsl, gethostbyname)
+])
+
+AC_CHECK_DECLS([freeaddrinfo, gai_strerror, getaddrinfo, getnameinfo],
+  [], [], [#include "have.h"]
+)
+
+AC_CACHE_SAVE
+
+dnl These are defined in files in m4/
+
+AC_ARG_WITH(libgcrypt, AC_HELP_STRING([--with-libgcrypt], [enable use of libgcrypt instead of OpenSSL])], [])
+
+tinc_CURSES
+tinc_LIBEVENT
+tinc_ZLIB
+tinc_LZO
+
+if test "$with_libgcrypt" = yes; then
+	AM_PATH_LIBGCRYPT([1.4.0], [], [])
+    	ln -sf gcrypt/cipher.c gcrypt/cipher.h gcrypt/crypto.c gcrypt/crypto.h gcrypt/digest.c gcrypt/digest.h gcrypt/ecdh.c gcrypt/ecdh.h gcrypt/ecdsa.c gcrypt/ecdsa.h gcrypt/ecdsagen.c gcrypt/ecdsagen.h gcrypt/prf.c gcrypt/prf.h gcrypt/rsa.c gcrypt/rsa.h gcrypt/rsagen.c gcrypt/rsagen.h src/
+else
+	tinc_OPENSSL
+    	ln -sf openssl/cipher.c openssl/cipher.h openssl/crypto.c openssl/crypto.h openssl/digest.c openssl/digest.h openssl/ecdh.c openssl/ecdh.h openssl/ecdsa.c openssl/ecdsa.h openssl/ecdsagen.c openssl/ecdsagen.h openssl/prf.c openssl/prf.h openssl/rsa.c openssl/rsa.h openssl/rsagen.c openssl/rsagen.h src/
+fi
+	
+
+dnl Check if support for jumbograms is requested 
+AC_ARG_ENABLE(jumbograms,
+  AS_HELP_STRING([--enable-jumbograms], [enable support for jumbograms (packets up to 9000 bytes)]),
+  [ AC_DEFINE(ENABLE_JUMBOGRAMS, 1, [Support for jumbograms (packets up to 9000 bytes)]) ]
+)
+
+AC_SUBST(INCLUDES)
+
+AC_CONFIG_FILES([Makefile src/Makefile doc/Makefile m4/Makefile gui/Makefile])
+
+AC_OUTPUT

debian/NEWS

@@ -1,14 +1,11 @@
-tinc (1.0.27-1) unstable; urgency=medium
+tinc (1.1~pre2-1) experimental; urgency=low
 
-  This package now provides native systemd service files, allowing multiple
+ * tinc-1.1 has separate control utility, tincctl, which is now used
-  instances of tinc to be managed. Existing networks listed in
+   to start/stop tinc instances, to reload configuration, to get
-  /etc/tinc/nets.boot will be converted to service instances once during this
+   various information about running tincd (including dump of nodes
-  upgrade. Afterwards, you can enable and disable networks using:
+   and connections) and so on.  tincd still reacts to some signals
+   as before, but this usage is deprecated.  In particular, -k
+   option is now gone.  Also, node/connection/etc dumps are
+   produced on tincctl stdout, not into syslog.
 
-    systemctl enable tinc@<netname>
+ -- Michael Tokarev <mjt@tls.msk.ru>  Sun, 07 Aug 2011 13:16:17 +0400
-    systemctl disable tinc@<netname>
-  
-  If you do not have systemd installed, the SysV init script will continue to
-  work as usual. For more information, see README.Debian.
-
- -- Guus Sliepen <guus@debian.org>  Sun, 10 Apr 2016 01:33:55 +0200

debian/README.Debian

@@ -1,54 +1,17 @@
 tinc for Debian
----------------
+----------------------
 
 The manual for tinc is also available as info pages, type `info tinc'
 to read it.
 
-There are several ways in which tinc may be automatically started at boot:
-
-Systemd
--------
-
-Since 1.0.27-1, the tinc package comes with native systemd service files.
-To enable and start a net, call:
-
-systemctl enable tinc@<netname>
-systemctl start tinc@<netname>
-
-This will cause a tincd to be started which uses the configuration from
-/etc/tinc/<netname>, and also makes sure that it will be started next time your
-system boots.
-
-Apart from controlling individual instances, you can also start/stop/reload all
-enabled instances simultaneously by omitting @<netname>, for example:
-
-systemctl reload tinc
-
-Note that when you have systemd installed on your system, the file
-/etc/tinc/nets.boot will not be used anymore to automatically start tinc
-daemons. If the variable EXTRA is defined in /etc/default/tinc, it will be
-passed on to tinc. The variable LIMITS is however not used.
-
-The service files that come with this package start tinc unconditionally.
-However, tinc does support socket activation. If you wish to write a socket
-unit for tinc, use the ListenStream option to specify on which port(s) and
-address(es) tinc should listen.
-
-SysVinit
---------
-
 The system startup script for tinc, /etc/init.d/tinc, uses the file
-/etc/tinc/nets.boot to find out which networks have to be started. Use one
+/etc/tinc/nets.boot to find out which networks have to be started.
-netname per line. Lines starting with a # are ignored.
 
-/etc/network/interfaces
+Alternatively, you can create a stanza in /etc/network/interfaces, and add a
------------------------
+line with "tinc-net <netname>". This will cause a tincd to be started which
-
+uses the configuration from /etc/tinc/<netname>. You can use an inet static
-You can create a stanza in /etc/network/interfaces, and add a line with
+(with address and netmask options) or inet dhcp stanza, in which case the ifup
-"tinc-net <netname>". This will cause a tincd to be started which uses the
+will configure the VPN interface and you do not need to have a tinc-up script.
-configuration from /etc/tinc/<netname>. You can use an inet static (with
-address and netmask options) or inet dhcp stanza, in which case the ifup will
-configure the VPN interface and you do not need to have a tinc-up script.
 
 The following options are also recognized and map directly to the corresponding
 command line options for tincd:
@@ -57,7 +20,6 @@ tinc-config <directory>
 tinc-debug <level>
 tinc-mlock yes
 tinc-logfile <filename>
-tinc-pidfile <filename>
 tinc-chroot yes
 tinc-user <username>
 
@@ -70,11 +32,10 @@ iface vpn inet static
 	tinc-debug 1
 	tinc-mlock yes
 	tinc-user nobody
-	tinc-pidfile /tmp/tinc.pid
 
 This will start a tinc daemon that reads its configuration from
 /etc/tinc/myvpn, logs at debug level 1, locks itself in RAM, runs as user
 nobody, and creates a network interface called "vpn". Ifup then sets the
 address and netmask on that interface.
 
- -- Guus Sliepen <guus@debian.org>, Sun, 10 April 2016, 01:38:08 +0200
+ -- Guus Sliepen <guus@debian.org>, Fri, 24 June 2011, 18:10:53 +0200

debian/changelog

@@ -1,200 +1,12 @@
-tinc (1.0.35-2) unstable; urgency=medium
+tinc (1.1~pre2-1) experimental; urgency=low
 
-  * Bump Standards-Version and Build-Depend on debhelper-compat (= 12).
+  * first cut of 1.1-tobe.
-  * Remove calls to dh_installinit and dh_systemd_start from debian/rules,
+    Rewrote control scripts et al to use tincctl.
-    compat level 12 does the right thing by default.
+  * build-depend on libssl >>1.0.0 to get proper EC support
-  * Ensure we clean up doc/tinc.info.
+  * remove crypto-related symlinks from src/ in clean --
+    probably should go into upstream makefile instead
 
- -- Guus Sliepen <guus@debian.org>  Mon, 28 Jan 2019 21:54:45 +0100
+ -- Michael Tokarev <mjt@tls.msk.ru>  Sun, 07 Aug 2011 12:57:15 +0400
-
-tinc (1.0.35-1) unstable; urgency=medium
-
-  * New upstream release.
-    - Includes fixes for CVE-2018-16737, CVE-2018-16738, CVE-2018-16758.
-
- -- Guus Sliepen <guus@debian.org>  Mon, 08 Oct 2018 16:09:06 +0200
-
-tinc (1.0.34-1) unstable; urgency=medium
-
-  [ Guus Sliepen ]
-  * New upstream release.
-    - Fixes a potential segmentation fault when connecting to an IPv6
-      peer via a proxy. Closes: #887401
-  * Add support for the $EXTRA variable in /etc/default/tinc when using
-    systemd. Closes: #887116
-
-  [ Benda Xu ]
-  * Prevent possible incorrect IPv6 checksums due to function inlining.
-    Closes: #891400
-
- -- Guus Sliepen <guus@debian.org>  Tue, 12 Jun 2018 23:00:49 +0200
-
-tinc (1.0.33-1) unstable; urgency=medium
-
-  * New upstream release.
-  * Test for /etc/default/tinc before trying to source it. Closes: #777262
-  * Use --runstatedir=/run.
-
- -- Guus Sliepen <guus@debian.org>  Sat, 04 Nov 2017 16:22:06 +0100
-
-tinc (1.0.32-1) unstable; urgency=medium
-
-  * New upstream release.
-  * Add a note to new nets.boot files that it is not used with systemd.
-    Closes: #841052
-  * In the post-down script, read the pid file only once. Closes: #832784
-  * Explicitly use /bin/sleep from coreutils. Closes: #772379
-  * Bump Standards-Version.
-
- -- Guus Sliepen <guus@debian.org>  Tue, 05 Sep 2017 20:23:36 +0200
-
-tinc (1.0.31-1) unstable; urgency=medium
-
-  * New upstream release.
-  * Bump Standards-Version.
-  * Bump debian/compat.
-  * Add missing Depends: lsb-base.
-
- -- Guus Sliepen <guus@debian.org>  Sun, 15 Jan 2017 16:20:40 +0100
-
-tinc (1.0.29-2) unstable; urgency=medium
-
-  * Rebuild with libssl-dev from unstable.
-
- -- Guus Sliepen <guus@debian.org>  Thu, 27 Oct 2016 13:09:46 +0200
-
-tinc (1.0.29-1) unstable; urgency=medium
-
-  * New upstream release.
-  * Bump debian/compat.
-
- -- Guus Sliepen <guus@debian.org>  Mon, 10 Oct 2016 22:30:25 +0200
-
-tinc (1.0.28-1) unstable; urgency=medium
-
-  * New upstream release.
-    - Fixes FTBFS on kfreebsd.
-  * Systemd service files are now provided by upstream.
-
- -- Guus Sliepen <guus@debian.org>  Sun, 10 Apr 2016 15:44:28 +0200
-
-tinc (1.0.27-2) unstable; urgency=medium
-
-  * Fix tinc@.service.
-
- -- Guus Sliepen <guus@debian.org>  Sun, 10 Apr 2016 12:45:33 +0200
-
-tinc (1.0.27-1) unstable; urgency=medium
-
-  * New upstream release.
-  * Bump Standards-Version.
-  * Add native systemd unit files.
-  * Automatically convert networks listed in nets.boot to systemd service
-    instances on upgrade.
-
- -- Guus Sliepen <guus@debian.org>  Sun, 10 Apr 2016 01:39:16 +0200
-
-tinc (1.0.26-1) unstable; urgency=medium
-
-  * New upstream release.
-  * Use the contents, not the presence, of the pidfile to check that tincd is
-    shut down properly. Closes: #774682
-  * Bump Standards-Version.
-
- -- Guus Sliepen <guus@debian.org>  Sun, 05 Jul 2015 17:23:08 +0200
-
-tinc (1.0.24-2) unstable; urgency=medium
-
-  * Improve the init script: stopping tinc now waits for the process to
-    terminate. If that doesn't happen in 5 seconds, it will send the TERM
-    signal again (which helps if tinc is waiting for a script to finish
-    executing). It now also detects whether the process mentioned in the PID
-    file is actually running, and if not it will exit early and without
-    warnings. Closes: #748107
-
- -- Guus Sliepen <guus@debian.org>  Wed, 14 May 2014 21:44:16 +0200
-
-tinc (1.0.24-1) unstable; urgency=medium
-
-  [ Guus Sliepen ]
-  * New upstream release
-  * Add a debian/watch file.
-  * Bump Standards-Version.
-
-  [ Gian Piero Carrubba ]
-  * Allow resource limits to be set in /etc/default/tinc.
-    Closes: #690685, #704702
-
- -- Guus Sliepen <guus@debian.org>  Sun, 11 May 2014 21:17:13 +0200
-
-tinc (1.0.23-2) unstable; urgency=low
-
-  * Use if-statements instead of && in shell scripts. Closes: #731279
-    The && operator does not clear the error status, and if the next statement
-    in a shell script does not change the error status it would cause the
-    script to prematurely exit. Thanks to Peter Reinholdtsen for spotting it.
-  * Use absolute path to tincd in the if-post-down script.
-
- -- Guus Sliepen <guus@debian.org>  Thu, 05 Dec 2013 09:41:13 +0000
-
-tinc (1.0.23-1) unstable; urgency=low
-
-  * New upstream release.
-
- -- Guus Sliepen <guus@debian.org>  Sat, 19 Oct 2013 21:06:05 +0200
-
-tinc (1.0.22-1) unstable; urgency=low
-
-  * New upstream release.
-    - Handles whitespace between command line flags and optional arguments.
-      Closes: #710267
-  * Bump Standards-Version.
-  * Source /lib/lsb/init-functions in the init.d script.
-  * Don't use texi2html anymore, use automake's install-html target which uses
-    makeinfo.
-
- -- Guus Sliepen <guus@debian.org>  Wed, 14 Aug 2013 15:34:29 +0200
-
-tinc (1.0.21-1) unstable; urgency=low
-
-  * New upstream release.
-    - Includes fix for CVE-2013-1428.
-
- -- Guus Sliepen <guus@debian.org>  Sun, 05 May 2013 10:42:33 +0200
-
-tinc (1.0.19-3) unstable; urgency=high
-
-  * Drop packets forwarded via TCP if they are too big (CVE-2013-1428).
-
- -- Guus Sliepen <guus@debian.org>  Fri, 12 Apr 2013 22:52:10 +0200
-
-tinc (1.0.19-2) unstable; urgency=low
-
-  * Fix behaviour of tinc-pidfile. Closes: #679130
-  * Enable parallel building in debian/rules.
-
- -- Guus Sliepen <guus@debian.org>  Tue, 26 Jun 2012 18:28:34 +0200
-
-tinc (1.0.19-1) unstable; urgency=low
-
-  * New upstream release.
-  * Bump debian/compat so tinc gets built with hardening flags.
-  * Allow tinc-pidfile in /etc/network/interfaces.
-
- -- Guus Sliepen <guus@debian.org>  Mon, 25 Jun 2012 20:29:22 +0200
-
-tinc (1.0.18-1) unstable; urgency=low
-
-  * New upstream release.
-
- -- Guus Sliepen <guus@debian.org>  Sun, 25 Mar 2012 18:52:15 +0200
-
-tinc (1.0.17-1) unstable; urgency=low
-
-  * New upstream release.
-  * Enable support for UML and VDE.
-
- -- Guus Sliepen <guus@debian.org>  Sat, 10 Mar 2012 14:50:00 +0100
 
 tinc (1.0.16-1) unstable; urgency=low
 

debian/compat

@@ -0,0 +1 @@
+7

debian/control

@@ -2,15 +2,13 @@ Source: tinc
 Section: net
 Priority: optional
 Maintainer: Guus Sliepen <guus@debian.org>
-Standards-Version: 4.3.0
+Standards-Version: 3.9.2
-Build-Depends: libssl-dev, debhelper-compat (= 12), gettext, texinfo, zlib1g-dev, liblzo2-dev, libvdeplug-dev
+Build-Depends: libssl-dev (>>1.0.0), debhelper (>= 7.0.50~), gettext, texi2html, texinfo, zlib1g-dev, liblzo2-dev
 Homepage: http://www.tinc-vpn.org/
-Rules-Requires-Root: no
 
 Package: tinc
 Architecture: any
-Pre-Depends: ${misc:Pre-Depends}
+Depends: ${shlibs:Depends}, ${misc:Depends}
-Depends: ${shlibs:Depends}, ${misc:Depends}, lsb-base (>= 3.0-6)
 Description: Virtual Private Network daemon
  tinc is a daemon with which you can create a virtual private network
  (VPN). One daemon can handle multiple connections, so you can

debian/doc-base.tinc

@@ -6,5 +6,5 @@ Abstract: This manual describes how to set up a Virtual Private
 Section: System/Security
 
 Format: HTML
-Files: /usr/share/doc/tinc/tinc.html/*
+Files: /usr/share/doc/tinc/tinc*.html
-Index: /usr/share/doc/tinc/tinc.html/index.html
+Index: /usr/share/doc/tinc/tinc_toc.html

debian/patches/fix-incorrect-icmpv6-checksum

@@ -1,65 +0,0 @@
-Package: tinc
-Version: 1.0.33-1
-Severity: important
-
-Dear Guus,
-
-I have been using tinc since 2009 and it is great!
-
-When PMTUDiscovery=yes and Mode=switch, and if ipv6 is used inside
-tinc, the ICMPv6 "Packet Too Big" packets have incorrect checksums.
-It can be reproduced by `ping6 <host in tinc> -s 1800` and `tcpdump -i
-<tinc interface>`.  Consequently, the host ignores the tinc-generated
-ICMPv6 packets, PMTUDiscovery does not work and the connections freeze
-when data flows are big.
-
-I find the bug is gone if the function "inet_checksum" in route.c is
-not inlined, either by compiling tinc with "-O2
--fno-inline-functions", or apply a patch such as,
-
-diff --git a/src/route.c b/src/route.c
-index ff82c06e..cd55383a 100644
---- a/src/route.c
-+++ b/src/route.c
-@@ -60,7 +60,7 @@ static const size_t opt_size = sizeof(struct nd_opt_hdr);
-
- /* RFC 1071 */
-
--static uint16_t inet_checksum(void *data, int len, uint16_t prevsum) {
-+__attribute__ ((noinline)) static uint16_t inet_checksum(void *data, int len, uint16_t prevsum) {
- 	uint16_t *p = data;
- 	uint32_t checksum = prevsum ^ 0xFFFF;
-
-
-
-I have tested with gcc-7.3.0 and gcc-5.4.0.  They behaved the same.  I
-am not good at assembly to find out what really happened, but it is
-for sure that inet_checksum does not work as expected if compiled
-inline.
-
-Thanks!
-
-Yours,
-Benda
-
--- System Information:
-Debian Release: buster/sid
-  APT prefers unstable
-  APT policy: (500, 'unstable')
-Architecture: amd64 (x86_64)
-
-Kernel: Linux 4.9.0-5-amd64 (SMP w/8 CPU cores)
-Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to en_US.UTF-8), LANGUAGE=en_US:en (charmap=UTF-8) (ignored: LC_ALL set to en_US.UTF-8)
-Shell: /bin/sh linked to /bin/dash
-Init: sysvinit (via /sbin/init)
-
-Versions of packages tinc depends on:
-ii  libc6      2.26-2
-ii  liblzo2-2  2.08-1.2+b2
-ii  libssl1.1  1.1.0g-2
-ii  lsb-base   9.20170808
-ii  zlib1g     1:1.2.8.dfsg-5
-
-tinc recommends no packages.
-
-tinc suggests no packages.

debian/patches/series

@@ -1,2 +0,0 @@
-fix-incorrect-icmpv6-checksum
-support-etc-defaults-tinc

debian/patches/support-etc-defaults-tinc

@@ -1,12 +0,0 @@
---- a/systemd/tinc@.service.in
-+++ b/systemd/tinc@.service.in
-@@ -9,7 +9,8 @@
- [Service]
- Type=simple
- WorkingDirectory=@sysconfdir@/tinc/%i
--ExecStart=@sbindir@/tincd -n %i -D
-+EnvironmentFile=/etc/default/tinc
-+ExecStart=@sbindir@/tincd -n %i -D $EXTRA
- ExecReload=@sbindir@/tincd -n %i -kHUP
- KillMode=mixed
- Restart=on-failure

debian/postinst

@@ -7,15 +7,14 @@ set -e
 case "$1" in
     configure)
 	if [ ! -e /dev/.devfsd ] ; then if [ ! -e /dev/.devfs ] ; then
-		if [ ! -e /dev/net/tun ] ; then if [ ! -e /dev/tun ] ; then if [ -e /dev/MAKEDEV ]; then
+		if [ ! -e /dev/net/tun ] ; then if [ ! -e /dev/tun ] ; then
 			echo "Creating tun device..."
 			cd /dev && ./MAKEDEV net/tun 2>/dev/null || ./MAKEDEV tun 2>/dev/null || echo "Failed to create tun device."
-		fi; fi; fi
+		fi; fi
 	fi; fi
 
 	if [ ! -e $NETSFILE ] ; then
-	    echo "## This file contains all names of the networks to be started on system startup when using sysvinit." > $NETSFILE
+	    echo "## This file contains all names of the networks to be started on system startup." > $NETSFILE
-	    echo "## If you are using systemd, use systemctl enable tinc@netname to enable individual networks." >> $NETSFILE
 	fi
     ;;
 

debian/preinst

@@ -1,28 +0,0 @@
-#!/bin/sh
-
-NETSFILE="/etc/tinc/nets.boot"
-SYSTEM="/lib/systemd/system"
-WANTS="/etc/systemd/system/multi-user.target.wants"
-
-set -e
-
-case "$1" in
-	upgrade)
-		if dpkg --compare-versions "$2" '<<' "1.0.27-1"; then
-			if [ -f "$NETSFILE" ]; then
-				echo -n "Creating systemd service instances from nets.boot:"
-				mkdir -p "$WANTS"
-				egrep '^[ ]*[a-zA-Z0-9_-]+' $NETSFILE | while read net args; do
-					echo -n " $net"
-					ln -s "$SYSTEM/tinc@.service" "$WANTS/tinc@$net.service" 2>/dev/null || true
-				done
-				echo "."
-			fi
-		fi
-	;;
-
-	*)
-	;;
-esac
-
-#DEBHELPER#

debian/rules

@@ -1,16 +1,34 @@
 #!/usr/bin/make -f
+# -*- makefile -*-
+# Sample debian/rules that uses debhelper.
+# This file was originally written by Joey Hess and Craig Small.
+# As a special exception, when this file is copied by dh-make into a
+# dh-make output file, you may use that output file without restriction.
+# This special exception was added by Craig Small in version 0.37 of dh-make.
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
 
 %:
 	dh  $@
 
-override_dh_clean:
+override_dh_auto_build:
-	dh_clean
+	dh_auto_build
-	rm -f doc/tinc.info
+	cd doc && $(MAKE) texi2html 
-
-override_dh_auto_configure:
-	dh_auto_configure -- --enable-uml --enable-vde --with-systemd=/lib/systemd/system --runstatedir=/run
 
 override_dh_auto_install:
-	dh_auto_install -- install-html
+	dh_auto_install
+	# Guess where texi2html installed its output today...
+	[ -f doc/tinc/tinc.html ] \
+		&& mv doc/tinc/*.html debian/tinc/usr/share/doc/tinc/ \
+		|| mv doc/*.html debian/tinc/usr/share/doc/tinc/
 	# Remove info dir file
 	rm -f debian/tinc/usr/share/info/dir
+
+override_dh_installinit:
+	dh_installinit -R
+
+override_dh_clean:
+	dh_clean
+	rm -f src/device.c
+	rm -f src/rsa.[ch] src/rsagen.[ch] src/prf.[ch] src/ecdh.[ch] src/ecdsa.[ch] src/ecdsagen.[ch] src/digest.[ch] src/crypto.[ch] src/cipher.[ch]

debian/tinc.default

@@ -1,7 +1,2 @@
 # Extra options to be passed to tincd.
 # EXTRA="-d"
-
-# Limits to be configured for the tincd process. Please read your shell
-# (pointed by /bin/sh) documentation for ulimit. You probably want to raise the
-# max locked memory value if using both --mlock and --user flags.
-# LIMITS="-l 1024"

debian/tinc.dirs

@@ -2,6 +2,5 @@ usr/sbin
 usr/share
 etc
 etc/init.d
-usr/share/locale
 usr/share/doc/tinc
 etc/tinc

debian/tinc.files

@@ -1,6 +1,6 @@
 usr/sbin/tincd
+usr/sbin/tincctl
 usr/share/man
 etc
 usr/share/doc/tinc
-usr/share/locale
 usr/share/info

debian/tinc.if-post-down

@@ -2,40 +2,18 @@
 
 set -e
 
-if [ "$METHOD" = loopback -o -z "$IF_TINC_NET" ]; then
+if [ "$IF_TINC_NET" ] ; then
-	exit 0
+	tincctl -n "$IF_TINC_NET" stop
-fi
+	sleep 0.1
-
+	i=0;
-# Determine location of the PID file
+	while [ -f "/var/run/tinc.$IF_TINC_NET.pid" ] ; do
-
-EXTRA=""
-if [ -n "$IF_TINC_PIDFILE" ]; then
-	EXTRA="--pidfile=$IF_TINC_PIDFILE"
-else
-	IF_TINC_PIDFILE=/var/run/tinc.$IF_TINC_NET.pid
-fi
-
-# Stop the tinc daemon
-
-read pid rest < $IF_TINC_PIDFILE 2>/dev/null
-
-/usr/sbin/tincd -n "$IF_TINC_NET" -k $EXTRA
-
-# Wait for it to shut down properly
-
-/bin/sleep 0.1
-i=0;
-while [ -f $IF_TINC_PIDFILE ] ; do
-	if [ ! -e "/proc/$pid" ] ; then
-		exit 0
-	fi
-
 		if [ $i = '30' ] ; then
 			echo 'Failed to stop tinc daemon!'
 			exit 1
 		fi
-	/bin/sleep 0.1
+		sleep 0.1
 		i=$(($i+1))
-done
+	done
+fi
 
 exit 0

debian/tinc.if-pre-up

@@ -2,29 +2,11 @@
 
 set -e
 
-if [ "$METHOD" = loopback -o -z "$IF_TINC_NET" ]; then
+[ -z "$IF_TINC_NET" ] && exit 0
-	exit 0
-fi
 
 # Read options from /etc/default
 
-[ -r /etc/default/tinc ] && . /etc/default/tinc
+. /etc/default/tinc
-
-# Set process limits
-
-setlimits() {
-  while [ $# -gt 0 ]; do
-    parm=$1 ; shift
-    if [ -n "$1" -a "${1#-}" = "$1" ]; then
-      value=$1 ; shift
-      ulimit $parm $value
-    else
-      ulimit $parm
-    fi
-  done
-}
-
-test -n "$LIMITS" && setlimits $LIMITS
 
 # Read options from /etc/network/interfaces
 
@@ -32,38 +14,23 @@ test -n "$LIMITS" && setlimits $LIMITS
 [ -n "$IF_TINC_DEBUG" ]           && EXTRA="$EXTRA -d$IF_TINC_DEBUG"
 [ -n "$IF_TINC_MLOCK" ]           && EXTRA="$EXTRA --mlock"
 [ -n "$IF_TINC_LOGFILE" ]         && EXTRA="$EXTRA --logfile=$IF_TINC_LOGFILE"
-[ -n "$IF_TINC_PIDFILE" ]         && EXTRA="$EXTRA --pidfile=$IF_TINC_PIDFILE" || IF_TINC_PIDFILE=/var/run/tinc.$IF_TINC_NET.pid
 [ -n "$IF_TINC_CHROOT" ]          && EXTRA="$EXTRA --chroot"
 [ -n "$IF_TINC_USER" ]            && EXTRA="$EXTRA --user=$IF_TINC_USER"
 
-
 # Start tinc daemon
 
 /usr/sbin/tincd -n "$IF_TINC_NET" -o "Interface=$IFACE" $EXTRA
 
 # Wait for it to come up properly
 
-/bin/sleep 0.1
+sleep 0.1
 i=0;
-while [ ! -f $IF_TINC_PIDFILE ] ; do
+while [ ! -f "/var/run/tinc.$IF_TINC_NET.pid" ] ; do
 	if [ $i = '30' ] ; then
 		echo 'Failed to start tinc daemon!'
 		exit 1
 	fi
-	/bin/sleep 0.1
+	sleep 0.1
-	i=$(($i+1))
-done
-
-while read pid rest < $IF_TINC_PIDFILE ; do
-	if [ -e "/proc/$pid" ] ; then
-		exit 0
-	fi
-
-	if [ $i = '30' ] ; then
-		echo 'Failed to start tinc daemon!'
-		exit 1
-	fi
-	/bin/sleep 0.1
 	i=$(($i+1))
 done
 

debian/tinc.if-up

@@ -2,8 +2,7 @@
 
 set -e
 
-if [ "$METHOD" = loopback -o -n "$IF_TINC_NET" ]; then
+[ "$METHOD" = loopback ] && exit 0
-	exit 0
+[ -n "$IF_TINC_NET" ] && exit 0
-fi
 
-invoke-rc.d tinc alarm || exit 0
+invoke-rc.d tinc retry

debian/tinc.init

@@ -18,9 +18,8 @@
 #
 # Based on Lubomir Bulej's Redhat init script.
 
-. /lib/lsb/init-functions
-
 DAEMON="/usr/sbin/tincd"
+CONTROL="/usr/sbin/tincctl"
 NAME="tinc"
 DESC="tinc daemons"
 TCONF="/etc/tinc"
@@ -41,7 +40,10 @@ foreach_net() {
   shift
   egrep '^[ ]*[a-zA-Z0-9_-]+' $NETSFILE | while read net args; do
     echo -n " $net"
-    "$@" $net $args
+    case "$1" in
+      start) $CONTROL -n $net start -- $EXTRA $args ;;
+      *) $CONTROL -n $net $1 ;;
+    esac
   done
   echo "."
 }
@@ -49,72 +51,13 @@ foreach_net() {
 signal_running() {
   for i in /var/run/tinc.*pid; do
     if [ -f "$i" ]; then
-      head -1 $i | while read pid; do
+      head -1 $i | while read pid junk; do
         kill -$1 $pid
       done
     fi
   done
 }
 
-setlimits() {
-  while [ $# -gt 0 ]; do
-    parm=$1 ; shift
-    if [ -n "$1" -a "${1#-}" = "$1" ]; then
-      value=$1 ; shift
-      ulimit $parm $value
-    else
-      ulimit $parm
-    fi
-  done
-}
-
-test -n "$LIMITS" && setlimits $LIMITS
-
-start() {
-  $DAEMON $EXTRA -n "$@"
-}
-
-stop() {
-  [ -f /var/run/tinc.$1.pid ] || return
-  read pid rest </var/run/tinc.$1.pid || return
-  kill -0 "$pid" 2>/dev/null || return
-
-  $DAEMON -n $1 -k || return
-
-  i=0;
-  /bin/sleep 0.5
-
-  # Wait for the pidfile to disappear
-  while [ -f /var/run/tinc.$1.pid ]; do
-    # And check that there is an actual process running
-    kill -0 "$pid" 2>/dev/null || return
-
-    if [ $i = '10' ] ; then
-      # It's still alive, kill it again and give up
-        $DAEMON -n $1 -k && /bin/sleep 0.5
-      break
-    else
-      echo -n "."
-      i=$(($i+1))
-    fi
-
-    /bin/sleep 0.5
-  done
-}
-
-reload() {
-  $DAEMON -n $1 -kHUP
-}
-
-alarm() {
-  $DAEMON -n $1 -kALRM
-}
-
-restart() {
-  stop "$@"
-  start "$@"
-}
-
 case "$1" in
   start)
     foreach_net "Starting $DESC:" start
@@ -128,11 +71,15 @@ case "$1" in
   restart)
     foreach_net "Restarting $DESC:" restart
   ;;
-  alarm)
+  force-restart)
+    $0 stop
+    $0 start
+  ;;
+  retry)
     signal_running ALRM
   ;;
   *)
-    echo "Usage: /etc/init.d/$NAME {start|stop|reload|restart|force-reload|alarm}"
+    echo "Usage: /etc/init.d/$NAME {start|stop|reload|restart|force-reload|retry}"
     exit 1
   ;;
 esac

debian/upstream/signing-key.asc

@@ -1,70 +0,0 @@
------BEGIN PGP PUBLIC KEY BLOCK-----
-Version: GnuPG v1
-
-mQINBEVZzTABEADawFv/ibQ48uA1eRhL07vdM36Pcq2HDyuyNA+vYEalNH4jLmha
-nGPvDALWwX0DXIWDAG8zeTj8s8zliLIjuPS4WRI2YdKIvWeG9fEvpKSXVWa42ica
-dpzn/H2aBd4Ax6rQaiTXKOvxANAp2Veb+73ssPV5AL00uGTpzhh98xQzfFQCZ9ZL
-YSVPqbMed5oCt/4jM9FBO2CuBtkfiO0dVVYtW7FAVjcIlE2NaZol/KGvz7wsS+yA
-dE42W0l5MdQueLmTF4AIUSSTyPFGMQoyqh+MPif73Y589IGcW6GdfKYWnVDo6Trh
-HOhcEky+uTYKb6NL0vrJgUiYVMzAOXFDdJni1eQGO6EfZRNYtTga3alWq/jVelK7
-BID5JyNbkrTAqdPnhJGivVyk8gGX3+Hng8rkXTfWhp6yAYau1QfBm0F2tIQmpL1C
-+7DoLvFErboQf685jXJBjzyvsJxB2ZLH1OOw6mNL0hy2LFkIyGza/bktY2em4apo
-KWV5AM5LpyW6THH1oDS7706xFNkf4IFhKE0hKPzBiRnMDjRtMI131lkc5+P8Lqf5
-jLTCFUgbEhU6Dz2YjhHAumVm0NWJETUpFDtVvMrqk+mp5xldUOWRNlYQC5aQOyda
-eHOlNzB/BFbPhKMWI/zWlEH6f0t6WjHb4iwpWO47511aVNHF59aPzbAHxwARAQAB
-tC9UaW5jIERldmVsb3BtZW50IFRlYW0gPHRpbmMtZGV2ZWxAdGluYy12cG4ub3Jn
-PokCNgQTAQIAIAUCRVnNMAIbAwYLCQgHAwIEFQIIAwQWAgMBAh4BAheAAAoJEEpg
-hLnA1x9KxOAQAMPhO2WTXv9AaGQBQhyyoGseKoSfcRjtI9YEfE0OInQQ2E+SPYF/
-dkfeLGAUqa4foTYQlMqfw70vBhTdVCb7HLTGn6/ICFUtDwakUQCgUQGlUVQiondA
-8W6jj+QWrh5BQhHuXy2nCVaKnksu0/xQPsJotghxuYqaot3iJ4qVw9iT/Yeo9irH
-Ffftqu0OVCdQ5zQuFNI9YCv/C83L59ecH7bOzYz2efTyobvxrhmgQtgOQwCWOE09
-Kr3veM9KLG33YoXlqv8QN/3CwtsJvSwfhj+R2JowZC7RqHe/yznRzmRMsgbrolxi
-uiJLonGxcNNkD7WhXi7/zL4A/JaC27XrFf1MPLv8aiTwnOIfrXd5jawpauUOZOXK
-UjIZHlIqviB0r5s7A+AFeHW38Tp9VzNuQ7aEl5bHbSXV+s7DTAwGb279z0AVaJ3h
-5hWFxupw7UoGdzROwCBYzeX3sioAL6QvkXua8X6zOH45VEiSwrRX3Hlx/MLo7Z4g
-PWgFLf6WviHQXCG834To1XIwUk9RgNsL7OzGjtaCuRymADImKMNwierq2zTfoRFQ
-v9onIadIMF1fsc70hiBG9yAi36MEuk4VxG8Jc3PQQfSFm4RWazv1k3E0AAIob2Ek
-DLVjvLO62Navo/OQ6D7yyiX0qes5S7/k3F1h8+87eRn3yxZE2kbxPg8KuQENBEVZ
-zYYBCACoYgExmMKEtABL3pir/IXI4exR/45hkP6txFIrkVQb8DGJ9H39kiDr4gtj
-F+pvcgMpec35S3m4fJ7WhDNvbDB4ZvONc1NMKs9cqDXfB+TLWPm4W+SkcKUrs+nK
-i8l7ieggTALJcvRoLTX2EFmUFrD6y870W3rK2SfC/0VJX8Ou5cPbwCeueExjo5x0
-3gNfu0jWUS0cyA9y+1rVVekrLuJY/+SI4jv3gdzrYbxD0f6dpbpC37QHoJdd0KGF
-acPtT2azjY+HxW10EA3Aw9oZWFXnb1nFg2RbDpkaGLmLbaXweltLyw154UmCXxym
-PXPqi9bSfEkj0GiYrapk4mW114u9ABEBAAGJA0QEGAECAA8FAkVZzYcCGwIFCQHh
-M4ABKQkQSmCEucDXH0rAXSAEGQECAAYFAkVZzYcACgkQ017duBDeLmmu3wf/TFZM
-tLKxiyQPtGSTE3eULPdWCEMDZXdSPTY0QHM7Zvh+qn1ei+iFpD0549MYnBEAwDIV
-4o62Nrcg8IPu0CEkZIAn2JiFFGYvMGk91awZGV1GS3umd7Dt349E1oKDPZVzRn+j
-QIKarXxxabRmx2s/dZZgSs/eguWTboBFmvls9tVfe8x/xPvcHFmqHVUoGKEJy6Tm
-no+s4yNjpc5wAaRml+GYf1tK9WMFuZn79qKxkYv4WI96dXR0FL59YbFRkkaI+1/b
-G31MvWTqVjY1nJGslByFPUUB8Ca1djtp1gx6NXnOYr3V5MEDfdbjjPu79No+/y6M
-tIua5yNtSRlk2nKhIqo3D/sGQ/uHijiMRAtoLhiyqYMc9W9vx/KOoCUHoMJqE39a
-Eputvgwwo0rwgSmNfB1dzneFojBdJ47WBSHC8NKtkpJj6mzvvlaI9jmEpK54x3nl
-OmBj3X/xaepoRGAtrmgTBP4A9hSjrTMGu/tUQjlX+Xcr6n3g7GSVe5FpUyIMPXEU
-+JZDTiEUyn1OdzfNGmnWP+KJX5pQVq4czf5XK6otLZJELDVw/Hbjnjmdz5WOKgEH
-jSof3WPeMBgPAcd/cMAZeiGtWM1UpJBHqEXTkthmrpmtRftJKDbooNM9d5OwKiT+
-I3vNBv/plMSr8NDjhTWC+ihrN6RBj1vaqpDgGpucPhoO2hwNqWuI4q5WUKtCyw6J
-An7ErNaH4c0nVaZq6kJ8Vxdt+LpKYmOsJ8y9xtl6StcrkKNn+6ZfCfee7DEo2bvb
-scfpqJqqOqb5KOagTpYs8mo6yQ3leRvFtoeBOQHVQzct23EwOMxbDyeunT50a1eH
-MZTEWuIiuCUudM81QXU46oIcaAtj8tpG0Tmnku9g27EjwxUt+8kVmhlPHMb2TdoF
-k5d0ce+JuxIG5+i+t8sUCorMc8zfp4g1bxZeMOcPnfyO3bSW11EVcN7ZxHlFC+XE
-YOByP50CM3P8lItPlQ+WpY9kYWjiwu9kVPaGQ16G47nspngJInU5dhka3KJGtIZe
-q7kBDQRFWc3GAQgAz/JUs24niKsd0ZtOjUWd4R4y0gjS0kC/vvLL2gbXYkA9tcjG
-5iEvVWJY34QsudX0v1ULsVnJ89X/gsk8hAhAia1TQm+0Qq+MSxEaQkMSaOO8N70U
-XzgH1dielvpea20WO4MyWQuRIJ0K2nsGmEPnt6ZP7fK8HVHFNggP/mQ6LMu1reAF
-gvb8cEtjb9B5QaCUEoLjsbsuo+vLW7AWy4GfIRNESHw2Qt08AUaGrihpu6zi7N2b
-QkHHJtqa63GzYJ+kYzAVvrFJXdwL/TRXLBzv+6yyvYSIHi8uB6/o6CZN6hpjfpME
-ph+oYPqXeNOyMd1E9Kg8ymcPrNyQKfE3WnCRXQARAQABiQIlBBgBAgAPBQJFWc3H
-AhsMBQkB4TOAAAoJEEpghLnA1x9KXYMP/3D9JYti6C8DWuX2hWv+2SUbLcMa5u1e
-ETewIo5S3mqGWSaxX4YLPVRkZ1lOLmFysOLimf0thYm7IsatLcWmBdYUpK92ilvr
-Sk2sKlhrOoBXEX/79Kz+Aj5PjeyiQxgQ7Ba/afwhU6aTqs2Dp1T0YNu2eBvV+1QH
-lZnW2Wh96zzwc0dJUuY9eBk5Fgpu08Wce7o6jxFPtVyAaQa0zcNAmw2TSY7wbunJ
-WTl9OgATAyqVCuhWW7AnPcSqkH8lQigSc00wfqJKOD2Us0FqN6UKDCZTyQkdP6hx
-G+3aUkkvGSOxy7u9bVWmrikuJMoiIY/CH/m+GcJJATVibI7t5MhhtBGySKc3PAwc
-58sVe9AnbDvs84efrNP59j2KG2KKqcqjTGAmKyJnG3N50xJGakDIsqfneIRNWpEE
-pOOPaOqR4qnPAS9OSt9A3hqBpWPjQcScd6AuO+J2PE5y23pTnb9PtLBQb5e4VFiv
-N54u8j4bU2CO0SC2isZ3CR68dPHthWsxt4XbjhgktjbpQRQ8L2EDBQ8oE13GOrOw
-P8x4Q0eC5uzkXNyRqzKOsxlZEuc+75aDDd3M2GDw08FG7GI1p/L+NgenwT+9TmFX
-2hOKVrjgyx+fPut1t5DJJubDWXGOK33qvrL7HTCEv1zz7LNbbPwwNHK4lfMAWuJW
-D9wc3Y9Se/P/
-=5MAs
------END PGP PUBLIC KEY BLOCK-----

debian/watch

@@ -1,2 +0,0 @@
-version=3
-opts=pgpsigurlmangle=s/$/.sig/ http://www.tinc-vpn.org/packages/tinc-(1\.0\.\d+)\.tar\.gz

depcomp

@@ -1,9 +1,10 @@
 #! /bin/sh
 # depcomp - compile a program generating dependencies as side-effects
 
-scriptversion=2018-03-07.03; # UTC
+scriptversion=2009-04-28.21; # UTC
 
-# Copyright (C) 1999-2018 Free Software Foundation, Inc.
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free
+# Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -16,7 +17,7 @@ scriptversion=2018-03-07.03; # UTC
 # GNU General Public License for more details.
 
 # You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -27,7 +28,7 @@ scriptversion=2018-03-07.03; # UTC
 
 case $1 in
   '')
-    echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
      exit 1;
      ;;
   -h | --h*)
@@ -39,11 +40,11 @@ as side-effects.
 
 Environment variables:
   depmode     Dependency tracking mode.
-  source      Source file read by 'PROGRAMS ARGS'.
+  source      Source file read by `PROGRAMS ARGS'.
-  object      Object file output by 'PROGRAMS ARGS'.
+  object      Object file output by `PROGRAMS ARGS'.
   DEPDIR      directory where to store dependencies.
   depfile     Dependency file to output.
-  tmpdepfile  Temporary file to use when outputting dependencies.
+  tmpdepfile  Temporary file to use when outputing dependencies.
   libtool     Whether libtool is used (yes/no).
 
 Report bugs to <bug-automake@gnu.org>.
@@ -56,66 +57,6 @@ EOF
     ;;
 esac
 
-# Get the directory component of the given path, and save it in the
-# global variables '$dir'.  Note that this directory component will
-# be either empty or ending with a '/' character.  This is deliberate.
-set_dir_from ()
-{
-  case $1 in
-    */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
-      *) dir=;;
-  esac
-}
-
-# Get the suffix-stripped basename of the given path, and save it the
-# global variable '$base'.
-set_base_from ()
-{
-  base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
-}
-
-# If no dependency file was actually created by the compiler invocation,
-# we still have to create a dummy depfile, to avoid errors with the
-# Makefile "include basename.Plo" scheme.
-make_dummy_depfile ()
-{
-  echo "#dummy" > "$depfile"
-}
-
-# Factor out some common post-processing of the generated depfile.
-# Requires the auxiliary global variable '$tmpdepfile' to be set.
-aix_post_process_depfile ()
-{
-  # If the compiler actually managed to produce a dependency file,
-  # post-process it.
-  if test -f "$tmpdepfile"; then
-    # Each line is of the form 'foo.o: dependency.h'.
-    # Do two passes, one to just change these to
-    #   $object: dependency.h
-    # and one to simply output
-    #   dependency.h:
-    # which is needed to avoid the deleted-header problem.
-    { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
-      sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
-    } > "$depfile"
-    rm -f "$tmpdepfile"
-  else
-    make_dummy_depfile
-  fi
-}
-
-# A tabulation character.
-tab='	'
-# A newline character.
-nl='
-'
-# Character ranges might be problematic outside the C locale.
-# These definitions help.
-upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
-lower=abcdefghijklmnopqrstuvwxyz
-digits=0123456789
-alpha=${upper}${lower}
-
 if test -z "$depmode" || test -z "$source" || test -z "$object"; then
   echo "depcomp: Variables source, object and depmode must be set" 1>&2
   exit 1
@@ -128,9 +69,6 @@ tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
 
 rm -f "$tmpdepfile"
 
-# Avoid interferences from the environment.
-gccflag= dashmflag=
-
 # Some modes work just like other modes, but use different flags.  We
 # parameterize here, but still list the modes in the big case below,
 # to make depend.m4 easier to write.  Note that we *cannot* use a case
@@ -152,24 +90,10 @@ if test "$depmode" = msvcmsys; then
    # This is just like msvisualcpp but w/o cygpath translation.
    # Just convert the backslash-escaped backslashes to single forward
    # slashes to satisfy depend.m4
-  cygpath_u='sed s,\\\\,/,g'
+   cygpath_u="sed s,\\\\\\\\,/,g"
    depmode=msvisualcpp
 fi
 
-if test "$depmode" = msvc7msys; then
-  # This is just like msvc7 but w/o cygpath translation.
-  # Just convert the backslash-escaped backslashes to single forward
-  # slashes to satisfy depend.m4
-  cygpath_u='sed s,\\\\,/,g'
-  depmode=msvc7
-fi
-
-if test "$depmode" = xlc; then
-  # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
-  gccflag=-qmakedep=gcc,-MF
-  depmode=gcc
-fi
-
 case "$depmode" in
 gcc3)
 ## gcc 3 implements dependency tracking that does exactly what
@@ -190,7 +114,8 @@ gcc3)
   done
   "$@"
   stat=$?
-  if test $stat -ne 0; then
+  if test $stat -eq 0; then :
+  else
     rm -f "$tmpdepfile"
     exit $stat
   fi
@@ -198,17 +123,13 @@ gcc3)
   ;;
 
 gcc)
-## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
-## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
-## (see the conditional assignment to $gccflag above).
 ## There are various ways to get dependency output from gcc.  Here's
 ## why we pick this rather obscure method:
 ## - Don't want to use -MD because we'd like the dependencies to end
 ##   up in a subdir.  Having to rename by hand is ugly.
 ##   (We might end up doing this anyway to support other compilers.)
 ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-##   -MM, not -M (despite what the docs say).  Also, it might not be
+##   -MM, not -M (despite what the docs say).
-##   supported by the other compilers which use the 'gcc' depmode.
 ## - Using -M directly means running the compiler twice (even worse
 ##   than renaming).
   if test -z "$gccflag"; then
@@ -216,31 +137,31 @@ gcc)
   fi
   "$@" -Wp,"$gccflag$tmpdepfile"
   stat=$?
-  if test $stat -ne 0; then
+  if test $stat -eq 0; then :
+  else
     rm -f "$tmpdepfile"
     exit $stat
   fi
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
-  # The second -e expression handles DOS-style file names with drive
+  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-  # letters.
+## The second -e expression handles DOS-style file names with drive letters.
   sed -e 's/^[^:]*: / /' \
       -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the "deleted header file" problem.
+## This next piece of magic avoids the `deleted header file' problem.
 ## The problem is that when a header file which appears in a .P file
 ## is deleted, the dependency causes make to die (because there is
 ## typically no way to rebuild the header).  We avoid this by adding
 ## dummy dependencies for each header file.  Too bad gcc doesn't do
 ## this for us directly.
-## Some versions of gcc put a space before the ':'.  On the theory
+  tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'.  On the theory
 ## that the space means something, we add a space to the output as
-## well.  hp depmode also adds that space, but also prefixes the VPATH
+## well.
-## to the object.  Take care to not repeat it in the output.
 ## Some versions of the HPUX 10.20 sed can't process this invocation
 ## correctly.  Breaking it into two sed invocations is a workaround.
-  tr ' ' "$nl" < "$tmpdepfile" \
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-    | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
-    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
@@ -258,7 +179,8 @@ sgi)
     "$@" -MDupdate "$tmpdepfile"
   fi
   stat=$?
-  if test $stat -ne 0; then
+  if test $stat -eq 0; then :
+  else
     rm -f "$tmpdepfile"
     exit $stat
   fi
@@ -266,41 +188,43 @@ sgi)
 
   if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
     echo "$object : \\" > "$depfile"
+
     # Clip off the initial element (the dependent).  Don't try to be
     # clever and replace this with sed code, as IRIX sed won't handle
     # lines with more than a fixed number of characters (4096 in
     # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
-    # the IRIX cc adds comments like '#:fec' to the end of the
+    # the IRIX cc adds comments like `#:fec' to the end of the
     # dependency line.
-    tr ' ' "$nl" < "$tmpdepfile" \
+    tr ' ' '
-      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
+' < "$tmpdepfile" \
-      | tr "$nl" ' ' >> "$depfile"
+    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+    tr '
+' ' ' >> "$depfile"
     echo >> "$depfile"
+
     # The second pass generates a dummy entry for each header file.
-    tr ' ' "$nl" < "$tmpdepfile" \
+    tr ' ' '
+' < "$tmpdepfile" \
    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
    >> "$depfile"
   else
-    make_dummy_depfile
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
   fi
   rm -f "$tmpdepfile"
   ;;
 
-xlc)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
 aix)
   # The C for AIX Compiler uses -M and outputs the dependencies
   # in a .u file.  In older versions, this file always lives in the
-  # current directory.  Also, the AIX compiler puts '$object:' at the
+  # current directory.  Also, the AIX compiler puts `$object:' at the
   # start of each line; $object doesn't have directory information.
   # Version 6 uses the directory in both cases.
-  set_dir_from "$object"
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  set_base_from "$object"
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
   if test "$libtool" = yes; then
     tmpdepfile1=$dir$base.u
     tmpdepfile2=$base.u
@@ -313,7 +237,9 @@ aix)
     "$@" -M
   fi
   stat=$?
-  if test $stat -ne 0; then
+
+  if test $stat -eq 0; then :
+  else
     rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
     exit $stat
   fi
@@ -322,100 +248,44 @@ aix)
   do
     test -f "$tmpdepfile" && break
   done
-  aix_post_process_depfile
+  if test -f "$tmpdepfile"; then
-  ;;
+    # Each line is of the form `foo.o: dependent.h'.
-
+    # Do two passes, one to just change these to
-tcc)
+    # `$object: dependent.h' and one to simply `dependent.h:'.
-  # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
+    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-  # FIXME: That version still under development at the moment of writing.
+    # That's a tab and a space in the [].
-  #        Make that this statement remains true also for stable, released
+    sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-  #        versions.
+  else
-  # It will wrap lines (doesn't matter whether long or short) with a
+    # The sourcefile does not contain any dependencies, so just
-  # trailing '\', as in:
+    # store a dummy comment line, to avoid errors with the Makefile
-  #
+    # "include basename.Plo" scheme.
-  #   foo.o : \
+    echo "#dummy" > "$depfile"
-  #    foo.c \
-  #    foo.h \
-  #
-  # It will put a trailing '\' even on the last line, and will use leading
-  # spaces rather than leading tabs (at least since its commit 0394caf7
-  # "Emit spaces for -MD").
-  "$@" -MD -MF "$tmpdepfile"
-  stat=$?
-  if test $stat -ne 0; then
-    rm -f "$tmpdepfile"
-    exit $stat
   fi
-  rm -f "$depfile"
-  # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
-  # We have to change lines of the first kind to '$object: \'.
-  sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
-  # And for each line of the second kind, we have to emit a 'dep.h:'
-  # dummy dependency, to avoid the deleted-header problem.
-  sed -n -e 's|^  *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
-## The order of this option in the case statement is important, since the
+icc)
-## shell code in configure will try each of these formats in the order
+  # Intel's C compiler understands `-MD -MF file'.  However on
-## listed in this file.  A plain '-MD' option would be understood by many
+  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
-## compilers, so we must ensure this comes after the gcc and icc options.
+  # ICC 7.0 will fill foo.d with something like
-pgcc)
+  #    foo.o: sub/foo.c
-  # Portland's C compiler understands '-MD'.
+  #    foo.o: sub/foo.h
-  # Will always output deps to 'file.d' where file is the root name of the
+  # which is wrong.  We want:
-  # source file under compilation, even if file resides in a subdirectory.
+  #    sub/foo.o: sub/foo.c
-  # The object file name does not affect the name of the '.d' file.
+  #    sub/foo.o: sub/foo.h
-  # pgcc 10.2 will output
+  #    sub/foo.c:
+  #    sub/foo.h:
+  # ICC 7.1 will output
   #    foo.o: sub/foo.c sub/foo.h
-  # and will wrap long lines using '\' :
+  # and will wrap long lines using \ :
   #    foo.o: sub/foo.c ... \
   #     sub/foo.h ... \
   #     ...
-  set_dir_from "$object"
-  # Use the source, not the object, to determine the base name, since
-  # that's sadly what pgcc will do too.
-  set_base_from "$source"
-  tmpdepfile=$base.d
 
-  # For projects that build the same source file twice into different object
+  "$@" -MD -MF "$tmpdepfile"
-  # files, the pgcc approach of using the *source* file root name can cause
-  # problems in parallel builds.  Use a locking strategy to avoid stomping on
-  # the same $tmpdepfile.
-  lockdir=$base.d-lock
-  trap "
-    echo '$0: caught signal, cleaning up...' >&2
-    rmdir '$lockdir'
-    exit 1
-  " 1 2 13 15
-  numtries=100
-  i=$numtries
-  while test $i -gt 0; do
-    # mkdir is a portable test-and-set.
-    if mkdir "$lockdir" 2>/dev/null; then
-      # This process acquired the lock.
-      "$@" -MD
   stat=$?
-      # Release the lock.
+  if test $stat -eq 0; then :
-      rmdir "$lockdir"
-      break
   else
-      # If the lock is being held by a different process, wait
-      # until the winning process is done or we timeout.
-      while test -d "$lockdir" && test $i -gt 0; do
-        sleep 1
-        i=`expr $i - 1`
-      done
-    fi
-    i=`expr $i - 1`
-  done
-  trap - 1 2 13 15
-  if test $i -le 0; then
-    echo "$0: failed to acquire lock after $numtries attempts" >&2
-    echo "$0: check lockdir '$lockdir'" >&2
-    exit 1
-  fi
-
-  if test $stat -ne 0; then
     rm -f "$tmpdepfile"
     exit $stat
   fi
@@ -427,8 +297,8 @@ pgcc)
   sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
   # Some versions of the HPUX 10.20 sed can't process this invocation
   # correctly.  Breaking it into two sed invocations is a workaround.
-  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
-    | sed -e 's/$/ :/' >> "$depfile"
+    sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
@@ -439,8 +309,9 @@ hp2)
   # 'foo.d', which lands next to the object file, wherever that
   # happens to be.
   # Much of this is similar to the tru64 case; see comments there.
-  set_dir_from  "$object"
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  set_base_from "$object"
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
   if test "$libtool" = yes; then
     tmpdepfile1=$dir$base.d
     tmpdepfile2=$dir.libs/$base.d
@@ -451,7 +322,8 @@ hp2)
     "$@" +Maked
   fi
   stat=$?
-  if test $stat -ne 0; then
+  if test $stat -eq 0; then :
+  else
      rm -f "$tmpdepfile1" "$tmpdepfile2"
      exit $stat
   fi
@@ -461,8 +333,8 @@ hp2)
     test -f "$tmpdepfile" && break
   done
   if test -f "$tmpdepfile"; then
-    sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
+    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
-    # Add 'dependent.h:' lines.
+    # Add `dependent.h:' lines.
     sed -ne '2,${
 	       s/^ *//
 	       s/ \\*$//
@@ -470,97 +342,67 @@ hp2)
 	       p
 	     }' "$tmpdepfile" >> "$depfile"
   else
-    make_dummy_depfile
+    echo "#dummy" > "$depfile"
   fi
   rm -f "$tmpdepfile" "$tmpdepfile2"
   ;;
 
 tru64)
    # The Tru64 compiler uses -MD to generate dependencies as a side
-  # effect.  'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
    # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
-  # dependencies in 'foo.d' instead, so we check for that too.
+   # dependencies in `foo.d' instead, so we check for that too.
    # Subdirectories are respected.
-  set_dir_from  "$object"
+   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  set_base_from "$object"
+   test "x$dir" = "x$object" && dir=
+   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
 
    if test "$libtool" = yes; then
-    # Libtool generates 2 separate objects for the 2 libraries.  These
+      # With Tru64 cc, shared objects can also be used to make a
-    # two compilations output dependencies in $dir.libs/$base.o.d and
+      # static library.  This mechanism is used in libtool 1.4 series to
+      # handle both shared and static libraries in a single compilation.
+      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+      #
+      # With libtool 1.5 this exception was removed, and libtool now
+      # generates 2 separate objects for the 2 libraries.  These two
+      # compilations output dependencies in $dir.libs/$base.o.d and
       # in $dir$base.o.d.  We have to check for both files, because
       # one of the two compilations can be disabled.  We should prefer
       # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
       # automatically cleaned when .libs/ is deleted, while ignoring
       # the former would cause a distcleancheck panic.
-    tmpdepfile1=$dir$base.o.d          # libtool 1.5
+      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
-    tmpdepfile2=$dir.libs/$base.o.d    # Likewise.
+      tmpdepfile2=$dir$base.o.d          # libtool 1.5
-    tmpdepfile3=$dir.libs/$base.d      # Compaq CCC V6.2-504
+      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
+      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
       "$@" -Wc,-MD
    else
-    tmpdepfile1=$dir$base.d
+      tmpdepfile1=$dir$base.o.d
       tmpdepfile2=$dir$base.d
       tmpdepfile3=$dir$base.d
+      tmpdepfile4=$dir$base.d
       "$@" -MD
    fi
 
    stat=$?
-  if test $stat -ne 0; then
+   if test $stat -eq 0; then :
-    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+   else
+      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
       exit $stat
    fi
 
-  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
    do
      test -f "$tmpdepfile" && break
    done
-  # Same post-processing that is required for AIX mode.
+   if test -f "$tmpdepfile"; then
-  aix_post_process_depfile
+      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-  ;;
+      # That's a tab and a space in the [].
-
+      sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-msvc7)
-  if test "$libtool" = yes; then
-    showIncludes=-Wc,-showIncludes
    else
-    showIncludes=-showIncludes
+      echo "#dummy" > "$depfile"
    fi
-  "$@" $showIncludes > "$tmpdepfile"
-  stat=$?
-  grep -v '^Note: including file: ' "$tmpdepfile"
-  if test $stat -ne 0; then
    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  # The first sed program below extracts the file names and escapes
-  # backslashes for cygpath.  The second sed program outputs the file
-  # name when reading, but also accumulates all include files in the
-  # hold buffer in order to output them again at the end.  This only
-  # works with sed implementations that can handle large buffers.
-  sed < "$tmpdepfile" -n '
-/^Note: including file:  *\(.*\)/ {
-  s//\1/
-  s/\\/\\\\/g
-  p
-}' | $cygpath_u | sort -u | sed -n '
-s/ /\\ /g
-s/\(.*\)/'"$tab"'\1 \\/p
-s/.\(.*\) \\/\1:/
-H
-$ {
-  s/.*/'"$tab"'/
-  G
-  p
-}' >> "$depfile"
-  echo >> "$depfile" # make sure the fragment doesn't end with a backslash
-  rm -f "$tmpdepfile"
-  ;;
-
-msvc7msys)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
    ;;
 
 #nosideeffect)
@@ -580,7 +422,7 @@ dashmstdout)
     shift
   fi
 
-  # Remove '-o $object'.
+  # Remove `-o $object'.
   IFS=" "
   for arg
   do
@@ -600,18 +442,18 @@ dashmstdout)
   done
 
   test -z "$dashmflag" && dashmflag=-M
-  # Require at least two characters before searching for ':'
+  # Require at least two characters before searching for `:'
   # in the target name.  This is to cope with DOS-style filenames:
-  # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
+  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
   "$@" $dashmflag |
-    sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
+    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
   rm -f "$depfile"
   cat < "$tmpdepfile" > "$depfile"
-  # Some versions of the HPUX 10.20 sed can't process this sed invocation
+  tr ' ' '
-  # correctly.  Breaking it into two sed invocations is a workaround.
+' < "$tmpdepfile" | \
-  tr ' ' "$nl" < "$tmpdepfile" \
+## Some versions of the HPUX 10.20 sed can't process this invocation
-    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+## correctly.  Breaking it into two sed invocations is a workaround.
-    | sed -e 's/$/ :/' >> "$depfile"
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
@@ -661,15 +503,12 @@ makedepend)
   touch "$tmpdepfile"
   ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
   rm -f "$depfile"
-  # makedepend may prepend the VPATH from the source file name to the object.
+  cat < "$tmpdepfile" > "$depfile"
-  # No need to regex-escape $object, excess matching of '.' is harmless.
+  sed '1,2d' "$tmpdepfile" | tr ' ' '
-  sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
+' | \
-  # Some versions of the HPUX 10.20 sed can't process the last invocation
+## Some versions of the HPUX 10.20 sed can't process this invocation
-  # correctly.  Breaking it into two sed invocations is a workaround.
+## correctly.  Breaking it into two sed invocations is a workaround.
-  sed '1,2d' "$tmpdepfile" \
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-    | tr ' ' "$nl" \
-    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
-    | sed -e 's/$/ :/' >> "$depfile"
   rm -f "$tmpdepfile" "$tmpdepfile".bak
   ;;
 
@@ -686,7 +525,7 @@ cpp)
     shift
   fi
 
-  # Remove '-o $object'.
+  # Remove `-o $object'.
   IFS=" "
   for arg
   do
@@ -705,10 +544,10 @@ cpp)
     esac
   done
 
-  "$@" -E \
+  "$@" -E |
-    | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-             -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
-    | sed '$ s: \\$::' > "$tmpdepfile"
+    sed '$ s: \\$::' > "$tmpdepfile"
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
   cat < "$tmpdepfile" >> "$depfile"
@@ -755,8 +594,8 @@ msvisualcpp)
   sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
-  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
-  echo "$tab" >> "$depfile"
+  echo "	" >> "$depfile"
   sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
@@ -783,9 +622,9 @@ exit 0
 # Local Variables:
 # mode: shell-script
 # sh-indentation: 2
-# eval: (add-hook 'before-save-hook 'time-stamp)
+# eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC0"
+# time-stamp-time-zone: "UTC"
 # time-stamp-end: "; # UTC"
 # End:

doc/Makefile.am

@@ -1,35 +1,58 @@
 ## Process this file with automake to get Makefile.in
 
 info_TEXINFOS = tinc.texi
-tinc_TEXINFOS = tincinclude.texi
 
-man_MANS = tincd.8 tinc.conf.5
+man_MANS = tincd.8 tincctl.8 tinc.conf.5 tinc-gui.8
 
-EXTRA_DIST = tincinclude.texi.in tincd.8.in tinc.conf.5.in sample-config
+EXTRA_DIST = tincinclude.texi.in tincd.8.in tincctl.8.in tinc.conf.5.in tinc-gui.8.in sample-config.tar.gz
 
-CLEANFILES = *.html tincd.8 tinc.conf.5 tincinclude.texi
+CLEANFILES = *.html tinc.info tincd.8 tincctl.8 tinc.conf.5 tinc-gui.8 tincinclude.texi
+
+# Use `ginstall' in the definition of man_MANS to avoid
+# confusion with the `install' target.  The install rule transforms `ginstall'
+# to install before applying any user-specified name transformations.
+transform = s/ginstall/install/; @program_transform_name@
+
+# For additional rules usually of interest only to the maintainer,
+# see GNUmakefile and Makefile.maint.
+
+sample-config.tar.gz: sample-config
+	GZIP=$(GZIP_ENV) $(AMTAR) chozf sample-config.tar.gz --exclude .svn sample-config
 
 texi2html: tinc.texi
-	$(AM_V_GEN)texi2html -split=chapter $<
+	texi2html -split=chapter tinc.texi
 
 tincd.8.html: tincd.8
-	$(AM_V_GEN)w3mman2html $< > $@
+	w3mman2html $< > $@
+
+tincctl.8.html: tincctl.8
+	w3mman2html $< > $@
+
+tinc-gui.8.html: tinc-gui.8
+	w3mman2html $< > $@
 
 tinc.conf.5.html: tinc.conf.5
-	$(AM_V_GEN)w3mman2html $< > $@
+	w3mman2html $< > $@
 
 substitute = sed \
 	-e s,'@PACKAGE\@',"$(PACKAGE)",g \
 	-e s,'@VERSION\@',"$(VERSION)",g \
 	-e s,'@sysconfdir\@',"$(sysconfdir)",g \
-	-e s,'@runstatedir\@',"$(runstatedir)",g \
 	-e s,'@localstatedir\@',"$(localstatedir)",g
 
-tincd.8: $(srcdir)/tincd.8.in
+tincd.8: tincd.8.in
-	$(AM_V_GEN)$(substitute) $(srcdir)/tincd.8.in > $@
+	$(substitute) $< > $@
 
-tinc.conf.5: $(srcdir)/tinc.conf.5.in
+tincctl.8: tincctl.8.in
-	$(AM_V_GEN)$(substitute) $(srcdir)/tinc.conf.5.in > $@
+	$(substitute) $< > $@
 
-tincinclude.texi: $(srcdir)/tincinclude.texi.in
+tinc-gui.8: tinc-gui.8.in
-	$(AM_V_GEN)$(substitute) $(srcdir)/tincinclude.texi.in > $@
+	$(substitute) $< > $@
+
+tinc.conf.5: tinc.conf.5.in
+	$(substitute) $< > $@
+
+tincinclude.texi: tincinclude.texi.in
+	$(substitute) $< > $@
+	
+tinc.texi: tincinclude.texi

doc/Makefile.in

@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -14,61 +15,6 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
-am__is_gnu_make = { \
-  if test -z '$(MAKELEVEL)'; then \
-    false; \
-  elif test -n '$(MAKE_HOST)'; then \
-    true; \
-  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
-    true; \
-  else \
-    false; \
-  fi; \
-}
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -78,7 +24,6 @@ install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
 install_sh_SCRIPT = $(install_sh) -c
 INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
 NORMAL_INSTALL = :
 PRE_INSTALL = :
 POST_INSTALL = :
@@ -88,65 +33,21 @@ POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
 subdir = doc
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in texinfo.tex
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/attribute.m4 \
-	$(top_srcdir)/m4/ax_append_flag.m4 \
+	$(top_srcdir)/m4/curses.m4 $(top_srcdir)/m4/libevent.m4 \
-	$(top_srcdir)/m4/ax_cflags_warn_all.m4 \
+	$(top_srcdir)/m4/lzo.m4 $(top_srcdir)/m4/openssl.m4 \
-	$(top_srcdir)/m4/ax_check_compile_flag.m4 \
+	$(top_srcdir)/m4/zlib.m4 $(top_srcdir)/configure.in
-	$(top_srcdir)/m4/ax_check_link_flag.m4 \
-	$(top_srcdir)/m4/ax_require_defined.m4 $(top_srcdir)/m4/lzo.m4 \
-	$(top_srcdir)/m4/openssl.m4 $(top_srcdir)/m4/zlib.m4 \
-	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
 SOURCES =
 DIST_SOURCES =
-AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
+INFO_DEPS = tinc.info
-am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
-am__v_DVIPS_0 = @echo "  DVIPS   " $@;
-am__v_DVIPS_1 = 
-AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
-am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
-am__v_MAKEINFO_0 = @echo "  MAKEINFO" $@;
-am__v_MAKEINFO_1 = 
-AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
-am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
-am__v_INFOHTML_0 = @echo "  INFOHTML" $@;
-am__v_INFOHTML_1 = 
-AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
-am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
-am__v_TEXI2DVI_0 = @echo "  TEXI2DVI" $@;
-am__v_TEXI2DVI_1 = 
-AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
-am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
-am__v_TEXI2PDF_0 = @echo "  TEXI2PDF" $@;
-am__v_TEXI2PDF_1 = 
-AM_V_texinfo = $(am__v_texinfo_@AM_V@)
-am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
-am__v_texinfo_0 = -q
-am__v_texinfo_1 = 
-AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
-am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
-am__v_texidevnull_0 = > /dev/null
-am__v_texidevnull_1 = 
-INFO_DEPS = $(srcdir)/tinc.info
 am__TEXINFO_TEX_DIR = $(srcdir)
 DVIS = tinc.dvi
 PDFS = tinc.pdf
@@ -158,11 +59,6 @@ TEXI2PDF = $(TEXI2DVI) --pdf --batch
 MAKEINFOHTML = $(MAKEINFO) --html
 AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
 DVIPS = dvips
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
 am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man5dir)" \
 	"$(DESTDIR)$(man8dir)"
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
@@ -186,22 +82,18 @@ am__nobase_list = $(am__nobase_strip_setup); \
 am__base_list = \
   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
 man5dir = $(mandir)/man5
 man8dir = $(mandir)/man8
 NROFF = nroff
 MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in $(tinc_TEXINFOS) texinfo.tex
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+# Use `ginstall' in the definition of man_MANS to avoid
+# confusion with the `install' target.  The install rule transforms `ginstall'
+# to install before applying any user-specified name transformations.
+transform = s/ginstall/install/; @program_transform_name@
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
 AUTOMAKE = @AUTOMAKE@
@@ -211,6 +103,7 @@ CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
+CURSES_LIBS = @CURSES_LIBS@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
@@ -220,15 +113,21 @@ ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 GREP = @GREP@
+INCLUDES = @INCLUDES@
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 LDFLAGS = @LDFLAGS@
+LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@
+LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@
+LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
 OBJEXT = @OBJEXT@
@@ -240,6 +139,7 @@ PACKAGE_TARNAME = @PACKAGE_TARNAME@
 PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 STRIP = @STRIP@
@@ -286,33 +186,29 @@ pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
-runstatedir = @runstatedir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
 sysconfdir = @sysconfdir@
-systemd_path = @systemd_path@
 target_alias = @target_alias@
 top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
 info_TEXINFOS = tinc.texi
-tinc_TEXINFOS = tincinclude.texi
+man_MANS = tincd.8 tincctl.8 tinc.conf.5 tinc-gui.8
-man_MANS = tincd.8 tinc.conf.5
+EXTRA_DIST = tincinclude.texi.in tincd.8.in tincctl.8.in tinc.conf.5.in tinc-gui.8.in sample-config.tar.gz
-EXTRA_DIST = tincinclude.texi.in tincd.8.in tinc.conf.5.in sample-config
+CLEANFILES = *.html tinc.info tincd.8 tincctl.8 tinc.conf.5 tinc-gui.8 tincinclude.texi
-CLEANFILES = *.html tincd.8 tinc.conf.5 tincinclude.texi
 substitute = sed \
 	-e s,'@PACKAGE\@',"$(PACKAGE)",g \
 	-e s,'@VERSION\@',"$(VERSION)",g \
 	-e s,'@sysconfdir\@',"$(sysconfdir)",g \
-	-e s,'@runstatedir\@',"$(runstatedir)",g \
 	-e s,'@localstatedir\@',"$(localstatedir)",g
 
 all: all-am
 
 .SUFFIXES:
-.SUFFIXES: .dvi .html .info .pdf .ps .texi
+.SUFFIXES: .dvi .ps
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
@@ -324,74 +220,69 @@ $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu doc/Makefile
+.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
 	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 	esac;
 
 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 
-$(top_srcdir)/configure:  $(am__configure_deps)
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(am__aclocal_m4_deps):
 
-.texi.info:
+tinc.info: tinc.texi 
-	$(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
+	restore=: && backupdir="$(am__leading_dot)am$$$$" && \
-	am__cwd=`pwd` && $(am__cd) $(srcdir) && \
 	rm -rf $$backupdir && mkdir $$backupdir && \
 	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
 	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
 	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
 	  done; \
 	else :; fi && \
-	cd "$$am__cwd"; \
 	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-	 -o $@ $<; \
+	 -o $@ `test -f 'tinc.texi' || echo '$(srcdir)/'`tinc.texi; \
 	then \
 	  rc=0; \
-	  $(am__cd) $(srcdir); \
 	else \
 	  rc=$$?; \
-	  $(am__cd) $(srcdir) && \
 	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
 	fi; \
 	rm -rf $$backupdir; exit $$rc
 
-.texi.dvi:
+tinc.dvi: tinc.texi  
-	$(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
-	$(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
+	$(TEXI2DVI) -o $@ `test -f 'tinc.texi' || echo '$(srcdir)/'`tinc.texi
-	$<
 
-.texi.pdf:
+tinc.pdf: tinc.texi  
-	$(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
-	$(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
+	$(TEXI2PDF) -o $@ `test -f 'tinc.texi' || echo '$(srcdir)/'`tinc.texi
-	$<
 
-.texi.html:
+tinc.html: tinc.texi  
-	$(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
+	rm -rf $(@:.html=.htp)
-	$(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
+	if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-	 -o $(@:.html=.htp) $<; \
+	 -o $(@:.html=.htp) `test -f 'tinc.texi' || echo '$(srcdir)/'`tinc.texi; \
 	then \
-	  rm -rf $@ && mv $(@:.html=.htp) $@; \
+	  rm -rf $@; \
+	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
+	    mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
 	else \
-	  rm -rf $(@:.html=.htp); exit 1; \
+	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
+	    rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
+	  exit 1; \
 	fi
-$(srcdir)/tinc.info: tinc.texi $(tinc_TEXINFOS)
-tinc.dvi: tinc.texi $(tinc_TEXINFOS)
-tinc.pdf: tinc.texi $(tinc_TEXINFOS)
-tinc.html: tinc.texi $(tinc_TEXINFOS)
 .dvi.ps:
-	$(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
-	$(DVIPS) $(AM_V_texinfo) -o $@ $<
+	$(DVIPS) -o $@ $<
 
 uninstall-dvi-am:
 	@$(NORMAL_UNINSTALL)
@@ -413,7 +304,9 @@ uninstall-html-am:
 
 uninstall-info-am:
 	@$(PRE_UNINSTALL)
-	@if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
+	@if test -d '$(DESTDIR)$(infodir)' && \
+	    (install-info --version && \
+	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
 	  list='$(INFO_DEPS)'; \
 	  for file in $$list; do \
 	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
@@ -470,7 +363,9 @@ dist-info: $(INFO_DEPS)
 	done
 
 mostlyclean-aminfo:
-	-rm -rf tinc.t2d tinc.t2p
+	-rm -rf tinc.aux tinc.cp tinc.cps tinc.fn tinc.fns tinc.ky tinc.kys \
+	  tinc.log tinc.pg tinc.pgs tinc.tmp tinc.toc tinc.tp tinc.tps \
+	  tinc.vr tinc.vrs
 
 clean-aminfo:
 	-test -z "tinc.dvi tinc.pdf tinc.ps tinc.html" \
@@ -484,18 +379,11 @@ maintainer-clean-aminfo:
 	done
 install-man5: $(man_MANS)
 	@$(NORMAL_INSTALL)
-	@list1=''; \
+	test -z "$(man5dir)" || $(MKDIR_P) "$(DESTDIR)$(man5dir)"
-	list2='$(man_MANS)'; \
+	@list=''; test -n "$(man5dir)" || exit 0; \
-	test -n "$(man5dir)" \
+	{ for i in $$list; do echo "$$i"; done; \
-	  && test -n "`echo $$list1$$list2`" \
+	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
-	  || exit 0; \
+	  sed -n '/\.5[a-z]*$$/p'; \
-	echo " $(MKDIR_P) '$(DESTDIR)$(man5dir)'"; \
-	$(MKDIR_P) "$(DESTDIR)$(man5dir)" || exit 1; \
-	{ for i in $$list1; do echo "$$i"; done;  \
-	if test -n "$$list2"; then \
-	  for i in $$list2; do echo "$$i"; done \
-	    | sed -n '/\.5[a-z]*$$/p'; \
-	fi; \
 	} | while read p; do \
 	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 	  echo "$$d$$p"; echo "$$p"; \
@@ -524,21 +412,16 @@ uninstall-man5:
 	  sed -n '/\.5[a-z]*$$/p'; \
 	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
 	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
-	dir='$(DESTDIR)$(man5dir)'; $(am__uninstall_files_from_dir)
+	test -z "$$files" || { \
+	  echo " ( cd '$(DESTDIR)$(man5dir)' && rm -f" $$files ")"; \
+	  cd "$(DESTDIR)$(man5dir)" && rm -f $$files; }
 install-man8: $(man_MANS)
 	@$(NORMAL_INSTALL)
-	@list1=''; \
+	test -z "$(man8dir)" || $(MKDIR_P) "$(DESTDIR)$(man8dir)"
-	list2='$(man_MANS)'; \
+	@list=''; test -n "$(man8dir)" || exit 0; \
-	test -n "$(man8dir)" \
+	{ for i in $$list; do echo "$$i"; done; \
-	  && test -n "`echo $$list1$$list2`" \
+	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
-	  || exit 0; \
+	  sed -n '/\.8[a-z]*$$/p'; \
-	echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
-	$(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
-	{ for i in $$list1; do echo "$$i"; done;  \
-	if test -n "$$list2"; then \
-	  for i in $$list2; do echo "$$i"; done \
-	    | sed -n '/\.8[a-z]*$$/p'; \
-	fi; \
 	} | while read p; do \
 	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 	  echo "$$d$$p"; echo "$$p"; \
@@ -567,18 +450,30 @@ uninstall-man8:
 	  sed -n '/\.8[a-z]*$$/p'; \
 	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
 	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
-	dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
+	test -z "$$files" || { \
-tags TAGS:
+	  echo " ( cd '$(DESTDIR)$(man8dir)' && rm -f" $$files ")"; \
+	  cd "$(DESTDIR)$(man8dir)" && rm -f $$files; }
+tags: TAGS
+TAGS:
 
-ctags CTAGS:
+ctags: CTAGS
-
+CTAGS:
-cscope cscopelist:
 
 
-distdir: $(BUILT_SOURCES)
+distdir: $(DISTFILES)
-	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+	@list='$(MANS)'; if test -n "$$list"; then \
-
+	  list=`for p in $$list; do \
-distdir-am: $(DISTFILES)
+	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+	  if test -n "$$list" && \
+	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+	    echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
+	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
+	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+	    echo "       typically \`make maintainer-clean' will remove them" >&2; \
+	    exit 1; \
+	  else :; fi; \
+	else :; fi
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	list='$(DISTFILES)'; \
@@ -628,15 +523,10 @@ install-am: all-am
 
 installcheck: installcheck-am
 install-strip:
-	if test -z '$(STRIP)'; then \
 	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
+	  `test -z '$(STRIP)' || \
-	else \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
 mostlyclean-generic:
 
 clean-generic:
@@ -675,11 +565,8 @@ install-dvi: install-dvi-am
 
 install-dvi-am: $(DVIS)
 	@$(NORMAL_INSTALL)
+	test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
 	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
-	fi; \
 	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  echo "$$d$$p"; \
@@ -694,22 +581,18 @@ install-html: install-html-am
 
 install-html-am: $(HTMLS)
 	@$(NORMAL_INSTALL)
+	test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
 	@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
-	fi; \
 	for p in $$list; do \
 	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  $(am__strip_dir) \
-	  d2=$$d$$p; \
+	  if test -d "$$d$$p"; then \
-	  if test -d "$$d2"; then \
 	    echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
 	    $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
-	    echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
+	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
+	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
 	  else \
-	    list2="$$list2 $$d2"; \
+	    list2="$$list2 $$d$$p"; \
 	  fi; \
 	done; \
 	test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
@@ -721,12 +604,9 @@ install-info: install-info-am
 
 install-info-am: $(INFO_DEPS)
 	@$(NORMAL_INSTALL)
+	test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
 	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
 	list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
-	fi; \
 	for file in $$list; do \
 	  case $$file in \
 	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
@@ -744,7 +624,8 @@ install-info-am: $(INFO_DEPS)
 	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
 	  $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
 	@$(POST_INSTALL)
-	@if $(am__can_run_installinfo); then \
+	@if (install-info --version && \
+	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
 	  list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
 	  for file in $$list; do \
 	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
@@ -758,11 +639,8 @@ install-pdf: install-pdf-am
 
 install-pdf-am: $(PDFS)
 	@$(NORMAL_INSTALL)
+	test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
 	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
-	fi; \
 	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  echo "$$d$$p"; \
@@ -774,11 +652,8 @@ install-ps: install-ps-am
 
 install-ps-am: $(PSS)
 	@$(NORMAL_INSTALL)
+	test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
 	@list='$(PSS)'; test -n "$(psdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
-	fi; \
 	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  echo "$$d$$p"; \
@@ -813,40 +688,58 @@ uninstall-man: uninstall-man5 uninstall-man8
 .MAKE: install-am install-strip
 
 .PHONY: all all-am check check-am clean clean-aminfo clean-generic \
-	cscopelist-am ctags-am dist-info distclean distclean-generic \
+	dist-info distclean distclean-generic distdir dvi dvi-am html \
-	distdir dvi dvi-am html html-am info info-am install \
+	html-am info info-am install install-am install-data \
-	install-am install-data install-data-am install-dvi \
+	install-data-am install-dvi install-dvi-am install-exec \
-	install-dvi-am install-exec install-exec-am install-html \
+	install-exec-am install-html install-html-am install-info \
-	install-html-am install-info install-info-am install-man \
+	install-info-am install-man install-man5 install-man8 \
-	install-man5 install-man8 install-pdf install-pdf-am \
+	install-pdf install-pdf-am install-ps install-ps-am \
-	install-ps install-ps-am install-strip installcheck \
+	install-strip installcheck installcheck-am installdirs \
-	installcheck-am installdirs maintainer-clean \
+	maintainer-clean maintainer-clean-aminfo \
-	maintainer-clean-aminfo maintainer-clean-generic mostlyclean \
+	maintainer-clean-generic mostlyclean mostlyclean-aminfo \
-	mostlyclean-aminfo mostlyclean-generic pdf pdf-am ps ps-am \
+	mostlyclean-generic pdf pdf-am ps ps-am uninstall uninstall-am \
-	tags-am uninstall uninstall-am uninstall-dvi-am \
+	uninstall-dvi-am uninstall-html-am uninstall-info-am \
-	uninstall-html-am uninstall-info-am uninstall-man \
+	uninstall-man uninstall-man5 uninstall-man8 uninstall-pdf-am \
-	uninstall-man5 uninstall-man8 uninstall-pdf-am uninstall-ps-am
+	uninstall-ps-am
 
-.PRECIOUS: Makefile
 
+# For additional rules usually of interest only to the maintainer,
+# see GNUmakefile and Makefile.maint.
+
+sample-config.tar.gz: sample-config
+	GZIP=$(GZIP_ENV) $(AMTAR) chozf sample-config.tar.gz --exclude .svn sample-config
 
 texi2html: tinc.texi
-	$(AM_V_GEN)texi2html -split=chapter $<
+	texi2html -split=chapter tinc.texi
 
 tincd.8.html: tincd.8
-	$(AM_V_GEN)w3mman2html $< > $@
+	w3mman2html $< > $@
+
+tincctl.8.html: tincctl.8
+	w3mman2html $< > $@
+
+tinc-gui.8.html: tinc-gui.8
+	w3mman2html $< > $@
 
 tinc.conf.5.html: tinc.conf.5
-	$(AM_V_GEN)w3mman2html $< > $@
+	w3mman2html $< > $@
 
-tincd.8: $(srcdir)/tincd.8.in
+tincd.8: tincd.8.in
-	$(AM_V_GEN)$(substitute) $(srcdir)/tincd.8.in > $@
+	$(substitute) $< > $@
 
-tinc.conf.5: $(srcdir)/tinc.conf.5.in
+tincctl.8: tincctl.8.in
-	$(AM_V_GEN)$(substitute) $(srcdir)/tinc.conf.5.in > $@
+	$(substitute) $< > $@
 
-tincinclude.texi: $(srcdir)/tincinclude.texi.in
+tinc-gui.8: tinc-gui.8.in
-	$(AM_V_GEN)$(substitute) $(srcdir)/tincinclude.texi.in > $@
+	$(substitute) $< > $@
+
+tinc.conf.5: tinc.conf.5.in
+	$(substitute) $< > $@
+
+tincinclude.texi: tincinclude.texi.in
+	$(substitute) $< > $@
+
+tinc.texi: tincinclude.texi
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.

doc/sample-config/hosts/alpha

@@ -1,15 +0,0 @@
-# Sample host configuration file
-
-# The real IP address of this tinc host. Can be used by other tinc hosts.
-Address = 123.234.35.67
-
-# Portnumber for incoming connections. Default is 655.
-Port = 655
-
-# Subnet on the virtual private network that is local for this host.
-Subnet = 192.168.1.0/24
-
-# The public key generated by `tincd -n example -K' is stored here
------BEGIN RSA PUBLIC KEY-----
-...
------END RSA PUBLIC KEY-----

doc/sample-config/hosts/beta

@@ -1,16 +0,0 @@
-# Sample host configuration file
-# This file was generated by host beta.
-
-# The real IP address of this tinc host. Can be used by other tinc hosts.
-Address = 123.45.67.189
-
-# Portnumber for incoming connections. Default is 655.
-Port = 6500
-
-# Subnet on the virtual private network that is local for this host.
-Subnet = 192.168.2.0/24
-
-# The public key generated by `tincd -n example -K' is stored here
------BEGIN RSA PUBLIC KEY-----
-...
------END RSA PUBLIC KEY-----

doc/sample-config/rsa_key.priv

@@ -1 +0,0 @@
-# Generate this file with `tincd -n example -K`

doc/sample-config/tinc-down

@@ -1,4 +0,0 @@
-#!/bin/sh
-# This file closes down the tap device.
-
-ifconfig $INTERFACE down

doc/sample-config/tinc-up

@@ -1,11 +0,0 @@
-#!/bin/sh
-# This file sets up the tap device.
-# It gives you the freedom to do anything you want with it.
-# Use the correct name for the tap device:
-# The environment variable $INTERFACE is set to the right name
-# on most platforms, but if it doesn't work try to set it manually.
-
-# Give it the right ip and netmask. Remember, the subnet of the
-# tap device must be larger than that of the individual Subnets
-# as defined in the host configuration file!
-ifconfig $INTERFACE 192.168.1.1 netmask 255.255.0.0

doc/sample-config/tinc.conf

@@ -1,22 +0,0 @@
-# Sample tinc configuration file
-
-# This is a comment.
-# Spaces and tabs are eliminated.
-# The = sign isn't strictly necessary any longer, though you may want
-# to leave it in as it improves readability :)
-# Variable names are treated case insensitive.
-
-# The name of this tinc host. Required.
-Name = alpha
-
-# The internet host to connect with.
-# Comment these out to make yourself a listen-only connection
-# You must use the name of another tinc host.
-# May be used multiple times for redundance.
-ConnectTo = beta
-
-# The tap device tinc will use.
-# /dev/tap0 for ethertap, FreeBSD or OpenBSD
-# /dev/tun0 for Solaris
-# /dev/net/tun for Linux tun/tap
-Device = /dev/net/tun

doc/tinc-gui.8.in

@@ -0,0 +1,57 @@
+.Dd 2011-06-26
+.Dt TINC-GUI 8
+.\" Manual page created by:
+.\" Guus Sliepen <guus@tinc-vpn.org>
+.Sh NAME
+.Nm tinc-gui
+.Nd tinc GUI
+.Sh SYNOPSIS
+.Nm
+.Op Fl n
+.Op Fl -net Ns = Ns Ar NETNAME
+.Op Fl -pidfile Ns = Ns Ar FILENAME
+.Op Fl -help
+.Sh DESCRIPTION
+This is a Python/wxWidgets based graphical user interface for tinc, a secure virtual private network (VPN) project.
+.Nm
+communicates with
+.Xr tincd 8
+to alter and inspect the running VPN's state.
+It can show the current settings, the list of connections, nodes, subnets, and edges.
+For now, the debug level can be changed from the GUI, and by right-clicking on a node in the list of connections,
+a pop-up menu will appear that allows one to disconnect that node.
+.Sh OPTIONS
+.Bl -tag -width indent
+.It Fl n, -net Ns = Ns Ar NETNAME
+Communicate with tincd(8) connected with
+.Ar NETNAME .
+.It Fl -pidfile Ns = Ns Ar FILENAME
+Use the cookie from
+.Ar FILENAME
+to authenticate with a running tinc daemon.
+If unspecified, the default is
+.Pa @localstatedir@/run/tinc. Ns Ar NETNAME Ns Pa .pid.
+.It Fl -help
+Display short list of options.
+.El
+.Sh BUGS
+The GUI is not finished yet, the final version will have much more functionality.
+If you find any bugs, report them to tinc@tinc-vpn.org.
+.Sh SEE ALSO
+.Xr tincd 8 ,
+.Pa http://www.tinc-vpn.org/ .
+.Pp
+The full documentation for tinc is maintained as a Texinfo manual.
+If the info and tinc programs are properly installed at your site,
+the command
+.Ic info tinc
+should give you access to the complete manual.
+.Pp
+tinc comes with ABSOLUTELY NO WARRANTY.
+This is free software, and you are welcome to redistribute it under certain conditions;
+see the file COPYING for details.
+.Sh AUTHORS
+.An "Ivo Timmermans"
+.An "Guus Sliepen" Aq guus@tinc-vpn.org
+.Pp
+And thanks to many others for their contributions to tinc!

doc/tinc.conf.5.in

@@ -1,21 +1,25 @@
-.Dd 2016-10-29
+.Dd 2010-01-16
 .Dt TINC.CONF 5
 .\" Manual page created by:
 .\" Ivo Timmermans
 .\" Guus Sliepen <guus@tinc-vpn.org>
+
 .Sh NAME
 .Nm tinc.conf
 .Nd tinc daemon configuration
+
 .Sh DESCRIPTION
 The files in the
 .Pa @sysconfdir@/tinc/
 directory contain runtime and security information for the tinc daemon.
+
 .Sh NETWORKS
 It is perfectly ok for you to run more than one tinc daemon.
 However, in its default form,
 you will soon notice that you can't use two different configuration files without the
 .Fl c
 option.
+
 .Pp
 We have thought of another way of dealing with this: network names.
 This means that you call
@@ -23,6 +27,7 @@ This means that you call
 with the
 .Fl n
 option, which will assign a name to this daemon.
+
 .Pp
 The effect of this is that the daemon will set its configuration root to
 .Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa / ,
@@ -33,6 +38,7 @@ is your argument to the
 option.
 You'll notice that messages appear in syslog as coming from
 .Nm tincd. Ns Ar NETNAME .
+
 .Pp
 However, it is not strictly necessary that you call tinc with the
 .Fl n
@@ -48,21 +54,25 @@ the configuration file should be
 .Pa @sysconfdir@/tinc/tinc.conf ,
 and the host configuration files are now expected to be in
 .Pa @sysconfdir@/tinc/hosts/ .
+
 .Pp
 But it is highly recommended that you use this feature of
 .Nm tinc ,
 because it will be so much clearer whom your daemon talks to.
 Hence, we will assume that you use it.
+
 .Sh NAMES
-Each tinc daemon must have a name that is unique in the network which it will be part of.
+Each tinc daemon should have a name that is unique in the network which it will be part of.
 The name will be used by other tinc daemons for identification.
 The name has to be declared in the
 .Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /tinc.conf
 file.
+
 .Pp
 To make things easy,
 choose something that will give unique and easy to remember names to your tinc daemon(s).
 You could try things like hostnames, owner surnames or location names.
+
 .Sh PUBLIC/PRIVATE KEYS
 You should use 
 .Ic tincd -K
@@ -81,14 +91,17 @@ The public key should be stored in the host configuration file
 .Va NAME
 stands for the name of the local tinc daemon (see
 .Sx NAMES ) .
+
 .Sh SERVER CONFIGURATION
 The server configuration of the daemon is done in the file
 .Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /tinc.conf .
 This file consists of comments (lines started with a
 .Li # )
 or assignments in the form of:
+
 .Pp
 .Va Variable Li = Ar Value .
+
 .Pp
 The variable names are case insensitive, and any spaces, tabs,
 newlines and carriage returns are ignored.
@@ -96,67 +109,44 @@ Note: it is not required that you put in the
 .Li =
 sign, but doing so improves readability.
 If you leave it out, remember to replace it with at least one space character.
+
 .Pp
 The server configuration is complemented with host specific configuration (see the next section).
 Although all configuration options for the local host listed in this document can also be put in
 .Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /tinc.conf ,
 it is recommended to put host specific configuration options in the host configuration file,
 as this makes it easy to exchange with other nodes.
+
 .Pp
 Here are all valid variables, listed in alphabetical order.
 The default value is given between parentheses.
 .Bl -tag -width indent
+
 .It Va AddressFamily Li = ipv4 | ipv6 | any Pq any
 This option affects the address family of listening and outgoing sockets.
 If
 .Qq any
 is selected, then depending on the operating system both IPv4 and IPv6 or just
 IPv6 listening sockets will be created.
-.It Va BindToAddress Li = Ar address Oo Ar port Oc Bq experimental
+
+.It Va BindToAddress Li = Ar address Bq experimental
 If your computer has more than one IPv4 or IPv6 address,
 .Nm tinc
 will by default listen on all of them for incoming connections.
-Multiple
+It is possible to bind only to a single address with this variable.
-.Va BindToAddress
+
-variables may be specified,
-in which case listening sockets for each specified address are made.
-.Pp
-If no
-.Ar port
-is specified, the socket will be bound to the port specified by the
-.Va Port
-option, or to port 655 if neither is given.
-To only bind to a specific port but not to a specific address, use
-.Li *
-for the
-.Ar address .
 .Pp
 This option may not work on all platforms.
+
 .It Va BindToInterface Li = Ar interface Bq experimental
 If your computer has more than one network interface,
 .Nm tinc
 will by default listen on all of them for incoming connections.
 It is possible to bind only to a single interface with this variable.
+
 .Pp
 This option may not work on all platforms.
-Also, on some platforms it will not actually bind to an interface,
+
-but rather to the address that the interface has at the moment a socket is created.
-.It Va Broadcast Li = no | mst | direct Po mst Pc Bq experimental
-This option selects the way broadcast packets are sent to other daemons.
-NOTE: all nodes in a VPN must use the same
-.Va Broadcast
-mode, otherwise routing loops can form.
-.Bl -tag -width indent
-.It no
-Broadcast packets are never sent to other nodes.
-.It mst
-Broadcast packets are sent and forwarded via the VPN's Minimum Spanning Tree.
-This ensures broadcast packets reach all nodes.
-.It direct
-Broadcast packets are sent directly to all nodes that can be reached directly.
-Broadcast packets received from other nodes are never forwarded.
-If the IndirectData option is also set, broadcast packets will only be sent to nodes which we have a meta connection to.
-.El
 .It Va ConnectTo Li = Ar name
 Specifies which other tinc daemon to connect to on startup.
 Multiple
@@ -167,21 +157,14 @@ The names should be known to this tinc daemon
 (i.e., there should be a host configuration file for the name on the
 .Va ConnectTo
 line).
+
 .Pp
 If you don't specify a host with
 .Va ConnectTo ,
 .Nm tinc
 won't try to connect to other daemons at all,
 and will instead just listen for incoming connections.
-.It Va DecrementTTL Li = yes | no Po no Pc Bq experimental
+
-When enabled,
-.Nm tinc
-will decrement the Time To Live field in IPv4 packets, or the Hop Limit field in IPv6 packets,
-before forwarding a received packet to the virtual network device or to another node,
-and will drop packets that have a TTL value of zero,
-in which case it will send an ICMP Time Exceeded packet back.
-.Pp
-Do not use this option if you use switch mode and want to use IPv6.
 .It Va Device Li = Ar device Po Pa /dev/tap0 , Pa /dev/net/tun No or other depending on platform Pc
 The virtual network device to use.
 .Nm tinc
@@ -193,92 +176,77 @@ instead of
 .Va Device .
 The info pages of the tinc package contain more information
 about configuring the virtual network device.
-.It Va DeviceType Li = Ar type Pq platform dependent
+
+.It Va DeviceType Li = tun | tunnohead | tunifhead | tap Po only supported on BSD platforms Pc
 The type of the virtual network device.
-Tinc will normally automatically select the right type of tun/tap interface, and this option should not be used.
+Tinc will normally automatically select the right type, and this option should not be used.
-However, this option can be used to select one of the special interface types, if support for them is compiled in.
+However, in case tinc does not seem to correctly interpret packets received from the virtual network device,
+using this option might help.
 .Bl -tag -width indent
-.It dummy
+
-Use a dummy interface.
+.It tun
-No packets are ever read or written to a virtual network device.
-Useful for testing, or when setting up a node that only forwards packets for other nodes.
-.It raw_socket
-Open a raw socket, and bind it to a pre-existing
-.Va Interface
-(eth0 by default).
-All packets are read from this interface.
-Packets received for the local node are written to the raw socket.
-However, at least on Linux, the operating system does not process IP packets destined for the local host.
-.It multicast
-Open a multicast UDP socket and bind it to the address and port (separated by spaces) and optionally a TTL value specified using
-.Va Device .
-Packets are read from and written to this multicast socket.
-This can be used to connect to UML, QEMU or KVM instances listening on the same multicast address.
-Do NOT connect multiple
-.Nm tinc 
-daemons to the same multicast address, this will very likely cause routing loops.
-Also note that this can cause decrypted VPN packets to be sent out on a real network if misconfigured.
-.It uml Pq not compiled in by default
-Create a UNIX socket with the filename specified by
-.Va Device ,
-or
-.Pa @runstatedir@/ Ns Ar NETNAME Ns Pa .umlsocket
-if not specified.
-.Nm tinc
-will wait for a User Mode Linux instance to connect to this socket.
-.It vde Pq not compiled in by default
-Uses the libvdeplug library to connect to a Virtual Distributed Ethernet switch,
-using the UNIX socket specified by
-.Va Device ,
-or
-.Pa @runstatedir@/vde.ctl
-if not specified.
-.El
-Also, in case tinc does not seem to correctly interpret packets received from the virtual network device,
-it can be used to change the way packets are interpreted:
-.Bl -tag -width indent
-.It tun Pq BSD and Linux
 Set type to tun.
 Depending on the platform, this can either be with or without an address family header (see below).
-.It tunnohead Pq BSD
+
+.It tunnohead
 Set type to tun without an address family header.
 Tinc will expect packets read from the virtual network device to start with an IP header.
 On some platforms IPv6 packets cannot be read from or written to the device in this mode.
-.It tunifhead Pq BSD
+
+.It tunifhead
 Set type to tun with an address family header.
 Tinc will expect packets read from the virtual network device
 to start with a four byte header containing the address family,
 followed by an IP header.
 This mode should support both IPv4 and IPv6 packets.
-.It utun Pq OS X
+
-Set type to utun.
+.It tap
-This is only supported on OS X version 10.6.8 and higher, but doesn't require the tuntaposx module.
-This mode should support both IPv4 and IPv6 packets.
-.It tap Pq BSD and Linux
 Set type to tap.
 Tinc will expect packets read from the virtual network device
 to start with an Ethernet header.
 .El
+
 .It Va DirectOnly Li = yes | no Po no Pc Bq experimental
 When this option is enabled, packets that cannot be sent directly to the destination node,
 but which would have to be forwarded by an intermediate node, are dropped instead.
 When combined with the IndirectData option,
 packets for nodes for which we do not have a meta connection with are also dropped.
+
+.It Va ECDSAPrivateKeyFile Li = Ar filename Po Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /ecdsa_key.priv Pc
+The file in which the private ECDSA key of this tinc daemon resides.
+This is only used if
+.Va ExperimentalProtocol
+is enabled.
+
+.It Va ExperimentalProtocol Li = yes | no Po no Pc Bq experimental
+When this option is enabled, experimental protocol enhancements will be used.
+Ephemeral ECDH will be used for key exchanges,
+and ECDSA will be used instead of RSA for authentication.
+When enabled, an ECDSA key must have been generated before with
+.Nm tincctl generate-ecdsa-keys .
+The experimental protocol may change at any time,
+and there is no guarantee that tinc will run stable when it is used.
+
 .It Va Forwarding Li = off | internal | kernel Po internal Pc Bq experimental
 This option selects the way indirect packets are forwarded.
 .Bl -tag -width indent
+
 .It off
 Incoming packets that are not meant for the local node,
 but which should be forwarded to another node, are dropped.
+
 .It internal
 Incoming packets that are meant for another node are forwarded by tinc internally.
+
 .Pp
 This is the default mode, and unless you really know you need another forwarding mode, don't change it.
+
 .It kernel
 Incoming packets are always sent to the TUN/TAP device, even if the packets are not for the local node.
 This is less efficient, but allows the kernel to apply its routing and firewall rules on them,
 and can also help debugging.
 .El
+
 .It Va GraphDumpFile Li = Ar filename Bq experimental
 If this option is present,
 .Nm tinc
@@ -291,16 +259,20 @@ If
 starts with a pipe symbol |,
 then the rest of the filename is interpreted as a shell command
 that is executed, the graph is then sent to stdin.
+
 .It Va Hostnames Li = yes | no Pq no
 This option selects whether IP addresses (both real and on the VPN) should
 be resolved. Since DNS lookups are blocking, it might affect tinc's
 efficiency, even stopping the daemon for a few seconds every time it does
 a lookup if your DNS server is not responding.
+
 .Pp
 This does not affect resolving hostnames to IP addresses from the
-host configuration files, but whether hostnames should be resolved while logging.
+host configuration files.
+
 .It Va IffOneQueue Li = yes | no Po no Pc Bq experimental
 (Linux only) Set IFF_ONE_QUEUE flag on TUN/TAP devices.
+
 .It Va Interface Li = Ar interface
 Defines the name of the interface corresponding to the virtual network device.
 Depending on the operating system and the type of device this may or may not actually set the name of the interface.
@@ -308,117 +280,85 @@ Under Windows, this variable is used to select which network interface will be u
 If you specified a
 .Va Device ,
 this variable is almost always already correctly set.
+
 .It Va KeyExpire Li = Ar seconds Pq 3600
 This option controls the period the encryption keys used to encrypt the data are valid.
 It is common practice to change keys at regular intervals to make it even harder for crackers,
 even though it is thought to be nearly impossible to crack a single key.
-.It Va LocalDiscovery Li = yes | no Po no Pc Bq experimental
+
-When enabled,
-.Nm tinc
-will try to detect peers that are on the same local network.
-This will allow direct communication using LAN addresses, even if both peers are behind a NAT
-and they only ConnectTo a third node outside the NAT,
-which normally would prevent the peers from learning each other's LAN address.
-.Pp
-Currently, local discovery is implemented by sending broadcast packets to the LAN during path MTU discovery.
-This feature may not work in all possible situations.
 .It Va MACExpire Li = Ar seconds Pq 600
 This option controls the amount of time MAC addresses are kept before they are removed.
 This only has effect when
 .Va Mode
 is set to
 .Qq switch .
+
 .It Va MaxTimeout Li = Ar seconds Pq 900
 This is the maximum delay before trying to reconnect to other tinc daemons.
+
 .It Va Mode Li = router | switch | hub Pq router
 This option selects the way packets are routed to other daemons.
 .Bl -tag -width indent
+
 .It router
 In this mode
 .Va Subnet
 variables in the host configuration files will be used to form a routing table.
 Only unicast packets of routable protocols (IPv4 and IPv6) are supported in this mode.
+
 .Pp
 This is the default mode, and unless you really know you need another mode, don't change it.
+
 .It switch
 In this mode the MAC addresses of the packets on the VPN will be used to
 dynamically create a routing table just like an Ethernet switch does.
 Unicast, multicast and broadcast packets of every protocol that runs over Ethernet are supported in this mode
 at the cost of frequent broadcast ARP requests and routing table updates.
+
 .Pp
 This mode is primarily useful if you want to bridge Ethernet segments.
+
 .It hub
 This mode is almost the same as the switch mode, but instead
 every packet will be broadcast to the other daemons
 while no routing table is managed.
 .El
+
 .It Va Name Li = Ar name Bq required
 This is the name which identifies this tinc daemon.
 It must be unique for the virtual private network this daemon will connect to.
-The Name may only consist of alphanumeric and underscore characters.
+
-If 
-.Va Name
-starts with a
-.Li $ ,
-then the contents of the environment variable that follows will be used.
-In that case, invalid characters will be converted to underscores.
-If
-.Va Name
-is
-.Li $HOST ,
-but no such environment variable exist, the hostname will be read using the gethostname() system call.
 .It Va PingInterval Li = Ar seconds Pq 60
 The number of seconds of inactivity that
 .Nm tinc
 will wait before sending a probe to the other end.
+
 .It Va PingTimeout Li = Ar seconds Pq 5
 The number of seconds to wait for a response to pings or to allow meta
 connections to block. If the other end doesn't respond within this time,
 the connection is terminated,
 and the others will be notified of this.
+
 .It Va PriorityInheritance Li = yes | no Po no Pc Bq experimental
 When this option is enabled the value of the TOS field of tunneled IPv4 packets
 will be inherited by the UDP packets that are sent out.
+
 .It Va PrivateKey Li = Ar key Bq obsolete
 The private RSA key of this tinc daemon.
 It will allow this tinc daemon to authenticate itself to other daemons.
+
 .It Va PrivateKeyFile Li = Ar filename Po Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /rsa_key.priv Pc
 The file in which the private RSA key of this tinc daemon resides.
+Note that there must be exactly one of
+.Va PrivateKey
+or
+.Va PrivateKeyFile
+specified in the configuration file.
+
 .It Va ProcessPriority Li = low | normal | high
 When this option is used the priority of the tincd process will be adjusted.
 Increasing the priority may help to reduce latency and packet loss on the VPN.
-.It Va Proxy Li = socks4 | socks5 | http | exec Ar ... Bq experimental
+
-Use a proxy when making outgoing connections.
-The following proxy types are currently supported:
-.Bl -tag -width indent
-.It socks4 Ar address Ar port Op Ar username
-Connects to the proxy using the SOCKS version 4 protocol.
-Optionally, a
-.Ar username
-can be supplied which will be passed on to the proxy server.
-Only IPv4 connections can be proxied using SOCKS 4.
-.It socks5 Ar address Ar port Op Ar username Ar password
-Connect to the proxy using the SOCKS version 5 protocol.
-If a
-.Ar username
-and
-.Ar password
-are given, basic username/password authentication will be used,
-otherwise no authentication will be used.
-.It http Ar address Ar port
-Connects to the proxy and sends a HTTP CONNECT request.
-.It exec Ar command
-Executes the given
-.Ar command
-which should set up the outgoing connection.
-The environment variables
-.Ev NAME ,
-.Ev NODE ,
-.Ev REMOTEADDRES
-and
-.Ev REMOTEPORT
-are available.
-.El
 .It Va ReplayWindow Li = Ar bytes Pq 16
 This is the size of the replay tracking window for each remote node, in bytes.
 The window is a bitfield which tracks 1 packet per bit, so for example
@@ -428,30 +368,35 @@ the interaction of replay tracking with underlying real packet loss and/or
 reordering.  Setting this to zero will disable replay tracking completely and
 pass all traffic, but leaves tinc vulnerable to replay-based attacks on your
 traffic.
+
 .It Va StrictSubnets Li = yes | no Po no Pc Bq experimental
 When this option is enabled tinc will only use Subnet statements which are
 present in the host config files in the local
 .Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /hosts/
-directory. Subnets learned via connections to other nodes and which are not
+directory.
-present in the local host config files are ignored.
+
 .It Va TunnelServer Li = yes | no Po no Pc Bq experimental
 When this option is enabled tinc will no longer forward information between other tinc daemons,
 and will only allow connections with nodes for which host config files are present in the local
 .Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /hosts/
 directory.
 Setting this options also implicitly sets StrictSubnets.
+
 .It Va UDPRcvBuf Li = Ar bytes Pq OS default
 Sets the socket receive buffer size for the UDP socket, in bytes.
 If unset, the default buffer size will be used by the operating system.
+
 .It Va UDPSndBuf Li = Ar bytes Pq OS default
 Sets the socket send buffer size for the UDP socket, in bytes.
 If unset, the default buffer size will be used by the operating system.
 .El
+
 .Sh HOST CONFIGURATION FILES
 The host configuration files contain all information needed
 to establish a connection to those hosts.
 A host configuration file is also required for the local tinc daemon,
 it will use it to read in it's listen port, public key and subnets.
+
 .Pp
 The idea is that these files are portable.
 You can safely mail your own host configuration file to someone else.
@@ -460,7 +405,8 @@ and now his tinc daemon will be able to connect to your tinc daemon.
 Since host configuration files only contain public keys,
 no secrets are revealed by sending out this information.
 .Bl -tag -width indent
-.It Va Address Li = Ar address Oo Ar port Oc Bq recommended
+
+.It Va Address Li = Ar address Oo port Oc Bq recommended
 The IP address or hostname of this tinc daemon on the real network.
 This will only be used when trying to make an outgoing connection to this tinc daemon.
 Optionally, a port can be specified to use for this address.
@@ -468,51 +414,66 @@ Multiple
 .Va Address
 variables can be specified, in which case each address will be tried until a working
 connection has been established.
-.It Va Cipher Li = Ar cipher Pq aes-256-cbc
+
+.It Va Cipher Li = Ar cipher Pq blowfish
 The symmetric cipher algorithm used to encrypt UDP packets.
-Any cipher supported by LibreSSL or OpenSSL is recognised.
+Any cipher supported by OpenSSL is recognised.
 Furthermore, specifying
 .Qq none
 will turn off packet encryption.
 It is best to use only those ciphers which support CBC mode.
+
 .It Va ClampMSS Li = yes | no Pq yes
 This option specifies whether tinc should clamp the maximum segment size (MSS)
 of TCP packets to the path MTU. This helps in situations where ICMP
 Fragmentation Needed or Packet too Big messages are dropped by firewalls.
+
 .It Va Compression Li = Ar level Pq 0
 This option sets the level of compression used for UDP packets.
 Possible values are 0 (off), 1 (fast zlib) and any integer up to 9 (best zlib),
 10 (fast lzo) and 11 (best lzo).
-.It Va Digest Li = Ar digest Pq sha256
+
+.It Va Digest Li = Ar digest Pq sha1
 The digest algorithm used to authenticate UDP packets.
-Any digest supported by LibreSSL or OpenSSL is recognised.
+Any digest supported by OpenSSL is recognised.
 Furthermore, specifying
 .Qq none
 will turn off packet authentication.
+
 .It Va IndirectData Li = yes | no Pq no
-When set to yes, only nodes which already have a meta connection to you
+This option specifies whether other tinc daemons besides the one you specified with
-will try to establish direct communication with you.
+.Va ConnectTo
-It is best to leave this option out or set it to no.
+can make a direct connection to you.
+This is especially useful if you are behind a firewall
+and it is impossible to make a connection from the outside to your tinc daemon.
+Otherwise, it is best to leave this option out or set it to no.
+
 .It Va MACLength Li = Ar length Pq 4
 The length of the message authentication code used to authenticate UDP packets.
 Can be anything from
 .Qq 0
 up to the length of the digest produced by the digest algorithm.
+
 .It Va PMTU Li = Ar mtu Po 1514 Pc
 This option controls the initial path MTU to this node.
+
 .It Va PMTUDiscovery Li = yes | no Po yes Pc
 When this option is enabled, tinc will try to discover the path MTU to this node.
 After the path MTU has been discovered, it will be enforced on the VPN.
+
 .It Va Port Li = Ar port Pq 655
 The port number on which this tinc daemon is listening for incoming connections,
 which is used if no port number is specified in an
 .Va Address
 statement.
+
 .It Va PublicKey Li = Ar key Bq obsolete
 The public RSA key of this tinc daemon.
 It will be used to cryptographically verify it's identity and to set up a secure connection.
+
 .It Va PublicKeyFile Li = Ar filename Bq obsolete
 The file in which the public RSA key of this tinc daemon resides.
+
 .Pp
 From version 1.0pre4 on
 .Nm tinc
@@ -521,6 +482,7 @@ the above two options then are not necessary.
 Either the PEM format is used, or exactly one of the above two options must be specified
 in each host configuration file,
 if you want to be able to establish a connection with that host.
+
 .It Va Subnet Li = Ar address Ns Op Li / Ns Ar prefixlength Ns Op Li # Ns Ar weight
 The subnet which this tinc daemon will serve.
 .Nm tinc
@@ -530,22 +492,26 @@ it will be sent to the daemon who has this subnet in his host configuration file
 Multiple
 .Va Subnet
 variables can be specified.
+
 .Pp
 Subnets can either be single MAC, IPv4 or IPv6 addresses,
 in which case a subnet consisting of only that single address is assumed,
 or they can be a IPv4 or IPv6 network address with a prefixlength.
+Shorthand notations are not supported.
 For example, IPv4 subnets must be in a form like 192.168.1.0/24,
 where 192.168.1.0 is the network address and 24 is the number of bits set in the netmask.
 Note that subnets like 192.168.1.1/24 are invalid!
 Read a networking HOWTO/FAQ/guide if you don't understand this.
-IPv6 subnets are notated like fec0:0:0:1::/64.
+IPv6 subnets are notated like fec0:0:0:1:0:0:0:0/64.
 MAC addresses are notated like 0:1a:2b:3c:4d:5e.
+
 .Pp
 A Subnet can be given a weight to indicate its priority over identical Subnets
 owned by different nodes.  The default weight is 10. Lower values indicate
 higher priority. Packets will be sent to the node with the highest priority,
 unless that node is not reachable, in which case the node with the next highest
 priority will be tried, and so on.
+
 .It Va TCPOnly Li = yes | no Pq no Bq obsolete
 If this variable is set to yes,
 then the packets are tunnelled over the TCP connection instead of a UDP connection.
@@ -553,51 +519,53 @@ This is especially useful for those who want to run a tinc daemon
 from behind a masquerading firewall,
 or if UDP packet routing is disabled somehow.
 Setting this options also implicitly sets IndirectData.
+
 .Pp
 Since version 1.0.10, tinc will automatically detect whether communication via
 UDP is possible or not.
 .El
+
 .Sh SCRIPTS
 Apart from reading the server and host configuration files,
 tinc can also run scripts at certain moments.
-Below is a list of filenames of scripts and a description of when they are run.
+Under Windows (not Cygwin), the scripts should have the extension
-A script is only run if it exists and if it is executable.
-.Pp
-Scripts are run synchronously;
-this means that tinc will temporarily stop processing packets until the called script finishes executing.
-This guarantees that scripts will execute in the exact same order as the events that trigger them.
-If you need to run commands asynchronously, you have to ensure yourself that they are being run in the background.
-.Pp
-Under Windows (not Cygwin), the scripts must have the extension
 .Pa .bat .
 .Bl -tag -width indent
+
 .It Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /tinc-up
 This is the most important script.
 If it is present it will be executed right after the tinc daemon has been started and has connected to the virtual network device.
 It should be used to set up the corresponding network interface,
 but can also be used to start other things.
-.Pp
 Under Windows you can use the Network Connections control panel instead of creating this script.
+
 .It Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /tinc-down
 This script is started right before the tinc daemon quits.
+
 .It Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /hosts/ Ns Ar HOST Ns Pa -up
 This script is started when the tinc daemon with name
 .Ar HOST
 becomes reachable.
+
 .It Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /hosts/ Ns Ar HOST Ns Pa -down
 This script is started when the tinc daemon with name
 .Ar HOST
 becomes unreachable.
+
 .It Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /host-up
 This script is started when any host becomes reachable.
+
 .It Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /host-down
 This script is started when any host becomes unreachable.
+
 .It Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /subnet-up
 This script is started when a Subnet becomes reachable.
 The Subnet and the node it belongs to are passed in environment variables.
+
 .It Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /subnet-down
 This script is started when a Subnet becomes unreachable.
 .El
+
 .Pp
 The scripts are started without command line arguments, but can make use of certain environment variables.
 Under UNIX like operating systems the names of environment variables must be preceded by a
@@ -609,56 +577,68 @@ files, they have to be put between
 .Li %
 signs.
 .Bl -tag -width indent
+
 .It Ev NETNAME
 If a netname was specified, this environment variable contains it.
+
 .It Ev NAME
 Contains the name of this tinc daemon.
+
 .It Ev DEVICE
 Contains the name of the virtual network device that tinc uses.
+
 .It Ev INTERFACE
 Contains the name of the virtual network interface that tinc uses.
 This should be used for commands like
 .Pa ifconfig .
+
 .It Ev NODE
 When a host becomes (un)reachable, this is set to its name.
 If a subnet becomes (un)reachable, this is set to the owner of that subnet.
+
 .It Ev REMOTEADDRESS
 When a host becomes (un)reachable, this is set to its real address.
+
 .It Ev REMOTEPORT
 When a host becomes (un)reachable, this is set to the port number it uses for communication with other tinc daemons.
+
 .It Ev SUBNET
 When a subnet becomes (un)reachable, this is set to the subnet.
+
 .It Ev WEIGHT
 When a subnet becomes (un)reachable, this is set to the subnet weight.
 .El
-.Pp
+
-Do not forget that under UNIX operating systems, you have to make the scripts executable, using the command
-.Nm chmod Li a+x Pa script .
 .Sh FILES
 The most important files are:
 .Bl -tag -width indent
+
 .It Pa @sysconfdir@/tinc/
 The top directory for configuration files.
+
 .It Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /tinc.conf
 The default name of the server configuration file for net
 .Ar NETNAME .
-.It Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /conf.d/
+
-Optional directory from which any *.conf file will be loaded
 .It Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /hosts/
 Host configuration files are kept in this directory.
+
 .It Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /tinc-up
 If an executable file with this name exists,
 it will be executed right after the tinc daemon has connected to the virtual network device.
 It can be used to set up the corresponding network interface.
+
 .It Pa @sysconfdir@/tinc/ Ns Ar NETNAME Ns Pa /tinc-down
 If an executable file with this name exists,
 it will be executed right before the tinc daemon is going to close
 its connection to the virtual network device.
 .El
+
 .Sh SEE ALSO
 .Xr tincd 8 ,
-.Pa https://www.tinc-vpn.org/ ,
+.Pa http://www.tinc-vpn.org/ ,
-.Pa http://www.tldp.org/LDP/nag2/ .
+.Pa http://www.linuxdoc.org/LDP/nag2/ .
+
 .Pp
 The full documentation for
 .Nm tinc
@@ -666,6 +646,7 @@ is maintained as a Texinfo manual.
 If the info and tinc programs are properly installed at your site, the command
 .Ic info tinc
 should give you access to the complete manual.
+
 .Pp
 .Nm tinc
 comes with ABSOLUTELY NO WARRANTY.

doc/tincctl.8.in

@@ -0,0 +1,194 @@
+.Dd 2011-06-25
+.Dt TINCCTL 8
+.\" Manual page created by:
+.\" Scott Lamb
+.Sh NAME
+.Nm tincctl
+.Nd tinc VPN control
+.Sh SYNOPSIS
+.Nm
+.Op Fl cn
+.Op Fl -config Ns = Ns Ar DIR
+.Op Fl -net Ns = Ns Ar NETNAME
+.Op Fl -pidfile Ns = Ns Ar FILENAME
+.Op Fl -help
+.Op Fl -version
+.Ar COMMAND
+.Sh DESCRIPTION
+This is the control program of tinc, a secure virtual private network (VPN)
+project.
+.Nm
+communicates with
+.Xr tincd 8
+to alter and inspect the running VPN's state.
+.Sh OPTIONS
+.Bl -tag -width indent
+.It Fl n, -net Ns = Ns Ar NETNAME
+Communicate with tincd(8) connected with
+.Ar NETNAME .
+.It Fl -pidfile Ns = Ns Ar FILENAME
+Use the cookie from
+.Ar FILENAME
+to authenticate with a running tinc daemon.
+If unspecified, the default is
+.Pa @localstatedir@/run/tinc. Ns Ar NETNAME Ns Pa .pid.
+.It Fl -help
+Display short list of options.
+.It Fl -version
+Output version information and exit.
+.El
+.Sh COMMANDS
+.zZ
+.Bl -tag -width indent
+.It start
+Start
+.Xr tincd 8 .
+.It stop
+Stop
+.Xr tincd 8 .
+.It restart
+Restart
+.Xr tincd 8 .
+.It reload
+Partially rereads configuration files. Connections to hosts whose host
+config files are removed are closed. New outgoing connections specified
+in
+.Xr tinc.conf 5
+will be made.
+.It pid
+Shows the PID of the currently running
+.Xr tincd 8 .
+.It generate-keys Op bits
+Generate both RSA and ECDSA keypairs (see below) and exit.
+.It generate-ecdsa-keys
+Generate public/private ECDSA keypair and exit.
+.It generate-rsa-keys Op bits
+Generate public/private RSA keypair and exit.
+If
+.Ar bits
+is omitted, the default length will be 2048 bits.
+When saving keys to existing files, tinc will not delete the old keys;
+you have to remove them manually.
+.It dump nodes
+Dump a list of all known nodes in the VPN.
+.It dump edges
+Dump a list of all known connections in the VPN.
+.It dump subnets
+Dump a list of all known subnets in the VPN.
+.It dump connections
+Dump a list of all meta connections with ourself.
+.It dump graph
+Dump a graph of the VPN in
+.Xr dotty 1
+format.
+.It purge
+Purges all information remembered about unreachable nodes.
+.It debug Ar N
+Sets debug level to
+.Ar N .
+.It retry
+Forces
+.Xr tincd 8
+to try to connect to all uplinks immediately.
+Usually
+.Xr tincd 8
+attempts to do this itself,
+but increases the time it waits between the attempts each time it failed,
+and if
+.Xr tincd 8
+didn't succeed to connect to an uplink the first time after it started,
+it defaults to the maximum time of 15 minutes.
+.It disconnect Ar NODE
+Closes the meta connection with the given
+.Ar NODE .
+.It top
+If
+.Nm
+is compiled with libcurses support, this will display live traffic statistics
+for all the known nodes, similar to the UNIX
+.Xr top 1
+command.
+See below for more information.
+.It pcap
+Dump VPN traffic going through the local tinc node in
+.Xr pcap-savefile 5
+format to standard output,
+from where it can be redirected to a file or piped through a program that can parse it directly,
+such as
+.Xr tcpdump 8 .
+.El
+.Sh EXAMPLES
+Examples of some commands:
+.Bd -literal -offset indent
+tincctl -n vpn dump graph | circo -Txlib
+tincctl -n vpn pcap | tcpdump -r -
+tincctl -n vpn top
+.Ed
+.Sh TOP
+The top command connects to a running tinc daemon and repeatedly queries its per-node traffic counters.
+It displays a list of all the known nodes in the left-most column,
+and the amount of bytes and packets read from and sent to each node in the other columns.
+By default, the information is updated every second.
+The behaviour of the top command can be changed using the following keys:
+.Bl -tag
+.It Ic s
+Change the interval between updates.
+After pressing the
+.Ic s
+key, enter the desired interval in seconds, followed by enter.
+Fractional seconds are honored.
+Intervals lower than 0.1 seconds are not allowed.
+.It Ic c
+Toggle between displaying current traffic rates (in packets and bytes per second)
+and cummulative traffic (total packets and bytes since the tinc daemon started).
+.It Ic n
+Sort the list of nodes by name.
+.It Ic i
+Sort the list of nodes by incoming amount of bytes.
+.It Ic I
+Sort the list of nodes by incoming amount of packets.
+.It Ic o
+Sort the list of nodes by outgoing amount of bytes.
+.It Ic O
+Sort the list of nodes by outgoing amount of packets.
+.It Ic t
+Sort the list of nodes by sum of incoming and outgoing amount of bytes.
+.It Ic T
+Sort the list of nodes by sum of incoming and outgoing amount of packets.
+.It Ic b
+Show amount of traffic in bytes.
+.It Ic k
+Show amount of traffic in kilobytes.
+.It Ic M
+Show amount of traffic in megabytes.
+.It Ic G
+Show amount of traffic in gigabytes.
+.It Ic q
+Quit.
+.El
+.Sh BUGS
+If you find any bugs, report them to tinc@tinc-vpn.org.
+.Sh SEE ALSO
+.Xr tincd 8 ,
+.Xr tinc.conf 5 ,
+.Xr dotty 1 ,
+.Xr pcap-savefile 7 ,
+.Xr tcpdump 8 ,
+.Xr top 1 ,
+.Pa http://www.tinc-vpn.org/ ,
+.Pa http://www.cabal.org/ .
+.Pp
+The full documentation for tinc is maintained as a Texinfo manual.
+If the info and tinc programs are properly installed at your site,
+the command
+.Ic info tinc
+should give you access to the complete manual.
+.Pp
+tinc comes with ABSOLUTELY NO WARRANTY.
+This is free software, and you are welcome to redistribute it under certain conditions;
+see the file COPYING for details.
+.Sh AUTHORS
+.An "Ivo Timmermans"
+.An "Guus Sliepen" Aq guus@tinc-vpn.org
+.Pp
+And thanks to many others for their contributions to tinc!

doc/tincd.8.in

@@ -1,4 +1,4 @@
-.Dd 2014-05-11
+.Dd 2011-06-25
 .Dt TINCD 8
 .\" Manual page created by:
 .\" Ivo Timmermans
@@ -8,17 +8,13 @@
 .Nd tinc VPN daemon
 .Sh SYNOPSIS
 .Nm
-.Op Fl cdDkKnoLRU
+.Op Fl cdDKnLRU
 .Op Fl -config Ns = Ns Ar DIR
 .Op Fl -no-detach
 .Op Fl -debug Ns Op = Ns Ar LEVEL
-.Op Fl -kill Ns Op = Ns Ar SIGNAL
 .Op Fl -net Ns = Ns Ar NETNAME
-.Op Fl -generate-keys Ns Op = Ns Ar BITS
-.Op Fl -option Ns = Ns Ar [HOST.]KEY=VALUE
 .Op Fl -mlock
 .Op Fl -logfile Ns Op = Ns Ar FILE
-.Op Fl -pidfile Ns = Ns Ar FILE
 .Op Fl -bypass-security
 .Op Fl -chroot
 .Op Fl -user Ns = Ns Ar USER
@@ -54,14 +50,6 @@ If not mentioned otherwise, this will show log messages on the standard error ou
 Increase debug level or set it to
 .Ar LEVEL
 (see below).
-.It Fl k, -kill Ns Op = Ns Ar SIGNAL
-Attempt to kill a running
-.Nm
-(optionally with the specified
-.Ar SIGNAL
-instead of SIGTERM) and exit.
-Under Windows (not Cygwin) the optional argument is ignored,
-the service will always be stopped and removed.
 .It Fl n, -net Ns = Ns Ar NETNAME
 Connect to net
 .Ar NETNAME .
@@ -73,29 +61,6 @@ for
 .Ar NETNAME
 is the same as not specifying any
 .Ar NETNAME .
-.It Fl K, -generate-keys Ns Op = Ns Ar BITS
-Generate public/private RSA keypair and exit.
-If
-.Ar BITS
-is omitted, the default length will be 2048 bits.
-When saving keys to existing files, tinc will not delete the old keys,
-you have to remove them manually.
-.It Fl o, -option Ns = Ns Ar [HOST.]KEY=VALUE
-Without specifying a
-.Ar HOST ,
-this will set server configuration variable
-.Ar KEY 
-to
-.Ar VALUE .
-If specified as
-.Ar HOST.KEY=VALUE ,
-this will set the host configuration variable 
-.Ar KEY
-of the host named
-.Ar HOST
-to
-.Ar VALUE .
-This option can be used more than once to specify multiple configuration variables.
 .It Fl L, -mlock
 Lock tinc into main memory.
 This will prevent sensitive data like shared private keys to be written to the system swap files/partitions.
@@ -105,12 +70,16 @@ If
 .Ar FILE
 is omitted, the default is
 .Pa @localstatedir@/log/tinc. Ns Ar NETNAME Ns Pa .log.
-.It Fl -pidfile Ns = Ns Ar FILE
+.It Fl -pidfile Ns = Ns Ar FILENAME
-Write PID to
+Store a cookie in
+.Ar FILENAME
+which allows
+.Xr tincctl 8
+to authenticate.
+If
 .Ar FILE
-instead of
+is omitted, the default is
-.Pa @runstatedir@/tinc. Ns Ar NETNAME Ns Pa .pid.
+.Pa @localstatedir@/run/tinc. Ns Ar NETNAME Ns Pa .pid.
-Under Windows this option will be ignored.
 .It Fl -bypass-security
 Disables encryption and authentication of the meta protocol.
 Only useful for debugging.
@@ -151,15 +120,6 @@ If the
 .Fl -logfile
 option is used, this will also close and reopen the log file,
 useful when log rotation is used.
-.It INT
-Temporarily increases debug level to 5.
-Send this signal again to revert to the original level.
-.It USR1
-Dumps the connection list to syslog.
-.It USR2
-Dumps virtual network device statistics, all known nodes, edges and subnets to syslog.
-.It WINCH
-Purges all information remembered about unreachable nodes.
 .El
 .Sh DEBUG LEVELS
 The tinc daemon can send a lot of messages to the syslog.
@@ -190,7 +150,7 @@ This will log all network traffic over the virtual private network.
 Directory containing the configuration files tinc uses.
 For more information, see
 .Xr tinc.conf 5 .
-.It Pa @runstatedir@/tinc. Ns Ar NETNAME Ns Pa .pid
+.It Pa @localstatedir@/run/tinc. Ns Ar NETNAME Ns Pa .pid
 The PID of the currently running
 .Nm
 is stored in this file.
@@ -206,8 +166,9 @@ If you find any bugs, report them to tinc@tinc-vpn.org.
 .Sh TODO
 A lot, especially security auditing.
 .Sh SEE ALSO
+.Xr tincctl 8 ,
 .Xr tinc.conf 5 ,
-.Pa https://www.tinc-vpn.org/ ,
+.Pa http://www.tinc-vpn.org/ ,
 .Pa http://www.cabal.org/ .
 .Pp
 The full documentation for tinc is maintained as a Texinfo manual.

doc/tincinclude.texi

@@ -1,5 +0,0 @@
-@set VERSION 1.0.35
-@set PACKAGE tinc
-@set sysconfdir /etc
-@set localstatedir /var
-@set runstatedir /var/run

doc/tincinclude.texi.in

@@ -2,4 +2,3 @@
 @set PACKAGE @PACKAGE@
 @set sysconfdir @sysconfdir@
 @set localstatedir @localstatedir@
-@set runstatedir @runstatedir@

gui/Makefile.am

@@ -0,0 +1,3 @@
+dist_bin_SCRIPTS = tinc-gui
+
+extra_DIST = README.gui

gui/Makefile.in

@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,61 +16,6 @@
 @SET_MAKE@
 
 VPATH = @srcdir@
-am__is_gnu_make = { \
-  if test -z '$(MAKELEVEL)'; then \
-    false; \
-  elif test -n '$(MAKE_HOST)'; then \
-    true; \
-  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
-    true; \
-  else \
-    false; \
-  fi; \
-}
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -88,42 +34,20 @@ PRE_UNINSTALL = :
 POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
-subdir = systemd
+subdir = gui
+DIST_COMMON = $(dist_bin_SCRIPTS) $(srcdir)/Makefile.am \
+	$(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/attribute.m4 \
-	$(top_srcdir)/m4/ax_append_flag.m4 \
+	$(top_srcdir)/m4/curses.m4 $(top_srcdir)/m4/libevent.m4 \
-	$(top_srcdir)/m4/ax_cflags_warn_all.m4 \
+	$(top_srcdir)/m4/lzo.m4 $(top_srcdir)/m4/openssl.m4 \
-	$(top_srcdir)/m4/ax_check_compile_flag.m4 \
+	$(top_srcdir)/m4/zlib.m4 $(top_srcdir)/configure.in
-	$(top_srcdir)/m4/ax_check_link_flag.m4 \
-	$(top_srcdir)/m4/ax_require_defined.m4 $(top_srcdir)/m4/lzo.m4 \
-	$(top_srcdir)/m4/openssl.m4 $(top_srcdir)/m4/zlib.m4 \
-	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
@@ -145,20 +69,13 @@ am__nobase_list = $(am__nobase_strip_setup); \
 am__base_list = \
   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
+am__installdirs = "$(DESTDIR)$(bindir)"
-  test -z "$$files" \
+SCRIPTS = $(dist_bin_SCRIPTS)
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+SOURCES =
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+DIST_SOURCES =
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__installdirs = "$(DESTDIR)$(systemddir)"
-DATA = $(nodist_systemd_DATA)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
 AUTOMAKE = @AUTOMAKE@
@@ -168,6 +85,7 @@ CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
+CURSES_LIBS = @CURSES_LIBS@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
@@ -177,15 +95,21 @@ ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 GREP = @GREP@
+INCLUDES = @INCLUDES@
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 LDFLAGS = @LDFLAGS@
+LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@
+LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@
+LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
 OBJEXT = @OBJEXT@
@@ -197,6 +121,7 @@ PACKAGE_TARNAME = @PACKAGE_TARNAME@
 PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 STRIP = @STRIP@
@@ -243,28 +168,20 @@ pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
-runstatedir = @runstatedir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
 sysconfdir = @sysconfdir@
-systemd_path = @systemd_path@
 target_alias = @target_alias@
 top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
-EXTRA_DIST = tinc.service.in tinc@.service.in
+dist_bin_SCRIPTS = tinc-gui
-CLEANFILES = tinc.service tinc@.service
+extra_DIST = README.gui
-@WITH_SYSTEMD_TRUE@systemddir = @systemd_path@
-@WITH_SYSTEMD_TRUE@nodist_systemd_DATA = tinc.service tinc@.service
-substitute = sed \
-        -e s,'@sbindir\@',"$(sbindir)",g \
-        -e s,'@sysconfdir\@',"$(sysconfdir)",g
-
 all: all-am
 
 .SUFFIXES:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
@@ -273,58 +190,69 @@ $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu systemd/Makefile'; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu gui/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu systemd/Makefile
+	  $(AUTOMAKE) --gnu gui/Makefile
+.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
 	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 	esac;
 
 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 
-$(top_srcdir)/configure:  $(am__configure_deps)
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(am__aclocal_m4_deps):
-install-nodist_systemdDATA: $(nodist_systemd_DATA)
+install-dist_binSCRIPTS: $(dist_bin_SCRIPTS)
 	@$(NORMAL_INSTALL)
-	@list='$(nodist_systemd_DATA)'; test -n "$(systemddir)" || list=; \
+	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
-	if test -n "$$list"; then \
+	@list='$(dist_bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(systemddir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(systemddir)" || exit 1; \
-	fi; \
 	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
+	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
-	done | $(am__base_list) | \
+	done | \
-	while read files; do \
+	sed -e 'p;s,.*/,,;n' \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(systemddir)'"; \
+	    -e 'h;s|.*|.|' \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(systemddir)" || exit $$?; \
+	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
-	done
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+	      if (++n[d] == $(am__install_max)) { \
+		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+	    else { print "f", d "/" $$4, $$1 } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	     test -z "$$files" || { \
+	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	     } \
+	; done
 
-uninstall-nodist_systemdDATA:
+uninstall-dist_binSCRIPTS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(nodist_systemd_DATA)'; test -n "$(systemddir)" || list=; \
+	@list='$(dist_bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	files=`for p in $$list; do echo "$$p"; done | \
-	dir='$(DESTDIR)$(systemddir)'; $(am__uninstall_files_from_dir)
+	       sed -e 's,.*/,,;$(transform)'`; \
-tags TAGS:
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+tags: TAGS
+TAGS:
 
-ctags CTAGS:
+ctags: CTAGS
-
+CTAGS:
-cscope cscopelist:
 
 
-distdir: $(BUILT_SOURCES)
+distdir: $(DISTFILES)
-	$(MAKE) $(AM_MAKEFLAGS) distdir-am
-
-distdir-am: $(DISTFILES)
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	list='$(DISTFILES)'; \
@@ -356,9 +284,9 @@ distdir-am: $(DISTFILES)
 	done
 check-am: all-am
 check: check-am
-all-am: Makefile $(DATA)
+all-am: Makefile $(SCRIPTS)
 installdirs:
-	for dir in "$(DESTDIR)$(systemddir)"; do \
+	for dir in "$(DESTDIR)$(bindir)"; do \
 	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: install-am
@@ -371,19 +299,13 @@ install-am: all-am
 
 installcheck: installcheck-am
 install-strip:
-	if test -z '$(STRIP)'; then \
 	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
+	  `test -z '$(STRIP)' || \
-	else \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
 mostlyclean-generic:
 
 clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
@@ -412,13 +334,13 @@ info: info-am
 
 info-am:
 
-install-data-am: install-nodist_systemdDATA
+install-data-am:
 
 install-dvi: install-dvi-am
 
 install-dvi-am:
 
-install-exec-am:
+install-exec-am: install-dist_binSCRIPTS
 
 install-html: install-html-am
 
@@ -456,30 +378,22 @@ ps: ps-am
 
 ps-am:
 
-uninstall-am: uninstall-nodist_systemdDATA
+uninstall-am: uninstall-dist_binSCRIPTS
 
 .MAKE: install-am install-strip
 
-.PHONY: all all-am check check-am clean clean-generic cscopelist-am \
+.PHONY: all all-am check check-am clean clean-generic distclean \
-	ctags-am distclean distclean-generic distdir dvi dvi-am html \
+	distclean-generic distdir dvi dvi-am html html-am info info-am \
-	html-am info info-am install install-am install-data \
+	install install-am install-data install-data-am \
-	install-data-am install-dvi install-dvi-am install-exec \
+	install-dist_binSCRIPTS install-dvi install-dvi-am \
-	install-exec-am install-html install-html-am install-info \
+	install-exec install-exec-am install-html install-html-am \
-	install-info-am install-man install-nodist_systemdDATA \
+	install-info install-info-am install-man install-pdf \
-	install-pdf install-pdf-am install-ps install-ps-am \
+	install-pdf-am install-ps install-ps-am install-strip \
-	install-strip installcheck installcheck-am installdirs \
+	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean maintainer-clean-generic mostlyclean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
-	mostlyclean-generic pdf pdf-am ps ps-am tags-am uninstall \
+	pdf-am ps ps-am uninstall uninstall-am \
-	uninstall-am uninstall-nodist_systemdDATA
+	uninstall-dist_binSCRIPTS
 
-.PRECIOUS: Makefile
-
-
-tinc.service: $(srcdir)/tinc.service.in
-	$(AM_V_GEN)$(substitute) $(srcdir)/tinc.service.in > $@
-
-tinc@.service: $(srcdir)/tinc@.service.in
-	$(AM_V_GEN)$(substitute) $(srcdir)/tinc@.service.in > $@
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.

gui/tinc-gui

@@ -0,0 +1,537 @@
+#!/usr/bin/python
+
+import string
+import socket
+import wx
+import sys
+from wx.lib.mixins.listctrl import ColumnSorterMixin
+from wx.lib.mixins.listctrl import ListCtrlAutoWidthMixin
+
+# Classes to interface with a running tinc daemon
+
+REQ_STOP = 0
+REQ_RELOAD = 1
+REQ_RESTART = 2
+REQ_DUMP_NODES = 3
+REQ_DUMP_EDGES = 4
+REQ_DUMP_SUBNETS = 5
+REQ_DUMP_CONNECTIONS = 6
+REQ_DUMP_GRAPH = 7
+REQ_PURGE = 8
+REQ_SET_DEBUG = 9
+REQ_RETRY = 10
+REQ_CONNECT = 11
+REQ_DISCONNECT = 12
+
+ID = 0
+ACK = 4
+CONTROL = 18
+
+class Node:
+	def parse(self, args):
+		self.name = args[0]
+		self.address = args[2]
+		if args[3] != 'port':
+			args.insert(3, 'port')
+			args.insert(4, '')
+		self.port = args[4]
+		self.cipher = int(args[6])
+		self.digest = int(args[8])
+		self.maclength = int(args[10])
+		self.compression = int(args[12])
+		self.options = int(args[14], 0x10)
+		self.status = int(args[16], 0x10)
+		self.nexthop = args[18]
+		self.via = args[20]
+		self.distance = int(args[22])
+		self.pmtu = int(args[24])
+		self.minmtu = int(args[26])
+		self.maxmtu = int(args[28][:-1])
+
+		self.subnets = {}
+
+class Edge:
+	def parse(self, args):
+		self.fr = args[0]
+		self.to = args[2]
+		self.address = args[4]
+		self.port = args[6]
+		self.options = int(args[8], 16)
+		self.weight = int(args[10])
+
+class Subnet:
+	def parse(self, args):
+		if args[0].find('#') >= 0:
+			(address, self.weight) = args[0].split('#', 1)
+		else:
+			self.weight = 10
+			address = args[0]
+
+		if address.find('/') >= 0:
+			(self.address, self.prefixlen) = address.split('/', 1)
+		else:
+			self.address = address
+			self.prefixlen = '48'
+
+		self.owner = args[2]	
+
+class Connection:
+	def parse(self, args):
+		self.name = args[0]
+		self.address = args[2]
+		if args[3] != 'port':
+			args.insert(3, 'port')
+			args.insert(4, '')
+		self.port = args[4]
+		self.options = int(args[6], 0x10)
+		self.socket = int(args[8])
+		self.status = int(args[10], 0x10)
+		self.weight = 123
+
+class VPN:
+	confdir = '/etc/tinc'
+	piddir = '/var/run/'
+
+	def connect(self):
+		f = open(self.pidfile)
+		info = string.split(f.readline())
+		f.close()
+		s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
+		s.connect((info[2], int(info[4])))
+		self.sf = s.makefile()
+		s.close()
+		hello = string.split(self.sf.readline())
+		self.name = hello[1]
+		self.sf.write('0 ^' + info[1] + ' 17\r\n')
+		self.sf.flush()
+		resp = string.split(self.sf.readline())
+		self.port = info[4]
+		self.nodes = {}
+		self.edges = {}
+		self.subnets = {}
+		self.connections = {}
+		self.refresh()
+
+	def refresh(self):
+		self.sf.write('18 3\r\n18 4\r\n18 5\r\n18 6\r\n')
+		self.sf.flush()
+
+		for node in self.nodes.values():
+			node.visited = False
+		for edge in self.edges.values():
+			edge.visited = False
+		for subnet in self.subnets.values():
+			subnet.visited = False
+		for connections in self.connections.values():
+			connections.visited = False
+
+		while True:
+			resp = string.split(self.sf.readline())
+			if len(resp) < 2:
+				break
+			if resp[0] != '18':
+				break
+			if resp[1] == '3':
+				if len(resp) < 3:
+					continue
+				node = self.nodes.get(resp[2]) or Node()
+				node.parse(resp[2:])
+				node.visited = True
+				self.nodes[resp[2]] = node
+			elif resp[1] == '4':
+				if len(resp) < 5:
+					continue
+				edge = self.nodes.get((resp[2], resp[4])) or Edge()
+				edge.parse(resp[2:])
+				edge.visited = True
+				self.edges[(resp[2], resp[4])] = edge
+			elif resp[1] == '5':
+				if len(resp) < 5:
+					continue
+				subnet = self.subnets.get((resp[2], resp[4])) or Subnet()
+				subnet.parse(resp[2:])
+				subnet.visited = True
+				self.subnets[(resp[2], resp[4])] = subnet
+				self.nodes[subnet.owner].subnets[resp[2]] = subnet
+			elif resp[1] == '6':
+				if len(resp) < 5:
+					break
+				connection = self.connections.get((resp[2], resp[4])) or Connection()
+				connection.parse(resp[2:])
+				connection.visited = True
+				self.connections[(resp[2], resp[4])] = connection
+			else:
+				break
+
+		for key, subnet in self.subnets.items():
+			if not subnet.visited:
+				del self.subnets[key]
+
+		for key, edge in self.edges.items():
+			if not edge.visited:
+				del self.edges[key]
+
+		for key, node in self.nodes.items():
+			if not node.visited:
+				del self.nodes[key]
+			else:
+				for key, subnet in node.subnets.items():
+					if not subnet.visited:
+						del node.subnets[key]
+
+		for key, connection in self.connections.items():
+			if not connection.visited:
+				del self.connections[key]
+
+	def close(self):
+		self.sf.close()
+
+	def disconnect(self, name):
+		self.sf.write('18 12 ' + name + '\r\n')
+		self.sf.flush()
+		resp = string.split(self.sf.readline())
+
+	def debug(self, level = -1):
+		self.sf.write('18 9 ' + str(level) + '\r\n')
+		self.sf.flush()
+		resp = string.split(self.sf.readline())
+		return int(resp[2])
+
+	def __init__(self, netname = None, pidfile = None):
+		self.tincconf = VPN.confdir + '/'
+
+		if netname:
+			self.netname = netname
+			self.tincconf += netname + '/'
+
+		self.tincconf += 'tinc.conf'
+
+		if pidfile is not None:
+			self.pidfile = pidfile
+		else:
+			self.pidfile = VPN.piddir + 'tinc.'
+			if netname:
+				self.pidfile += netname + '.'
+			self.pidfile += 'pid'
+
+# GUI starts here
+
+argv0 = sys.argv[0]
+del sys.argv[0]
+net = None
+pidfile = None
+
+def usage(exitcode = 0):
+	print('Usage: ' + argv0 + ' [options]')
+	print('\nValid options are:')
+	print('  -n, --net=NETNAME       Connect to net NETNAME.')
+	print('      --pidfile=FILENAME  Read control cookie from FILENAME.')
+	print('      --help              Display this help and exit.')
+	print('\nReport bugs to tinc@tinc-vpn.org.')
+	sys.exit(exitcode)
+
+while len(sys.argv):
+	if sys.argv[0] in ('-n', '--net'):
+		del sys.argv[0]
+		net = sys.argv[0]
+	elif sys.argv[0] in ('--pidfile'):
+		del sys.argv[0]
+		pidfile = sys.argv[0]
+	elif sys.argv[0] in ('--help'):
+		usage(0)
+	else:
+		print(argv0 + ': unrecognized option \'' + sys.argv[0] + '\'')
+		usage(1)
+
+	del sys.argv[0]
+
+vpn = VPN(net, pidfile)
+vpn.connect()
+
+class SuperListCtrl(wx.ListCtrl, ColumnSorterMixin, ListCtrlAutoWidthMixin):
+    def __init__(self, parent, style):
+        wx.ListCtrl.__init__(self, parent, -1, style=wx.LC_REPORT | wx.LC_HRULES | wx.LC_VRULES)
+	ListCtrlAutoWidthMixin.__init__(self)
+        ColumnSorterMixin.__init__(self, 14)
+
+    def GetListCtrl(self):
+        return self
+
+
+class SettingsPage(wx.Panel):
+	def OnDebugLevel(self, event):
+		vpn.debug(self.debug.GetValue())
+
+	def __init__(self, parent, id):
+		wx.Panel.__init__(self, parent, id)
+		grid = wx.FlexGridSizer(cols = 2)
+		grid.AddGrowableCol(0, 1)
+
+		namelabel = wx.StaticText(self, -1, 'Name:')
+		self.name = wx.TextCtrl(self, -1, vpn.name)
+		grid.Add(namelabel)
+		grid.Add(self.name)
+
+		portlabel = wx.StaticText(self, -1, 'Port:')
+		self.port = wx.TextCtrl(self, -1, vpn.port)
+		grid.Add(portlabel)
+		grid.Add(self.port)
+
+		debuglabel = wx.StaticText(self, -1, 'Debug level:')
+		self.debug = wx.SpinCtrl(self, min = 0, max = 5, initial = vpn.debug())
+		self.debug.Bind(wx.EVT_SPINCTRL, self.OnDebugLevel)
+		grid.Add(debuglabel)
+		grid.Add(self.debug)
+
+		modelabel = wx.StaticText(self, -1, 'Mode:')
+		self.mode = wx.ComboBox(self, -1, style = wx.CB_READONLY, value = 'Router', choices = ['Router', 'Switch', 'Hub'])
+		grid.Add(modelabel)
+		grid.Add(self.mode)
+
+		self.SetSizer(grid)
+
+class ConnectionsPage(wx.Panel):
+	def __init__(self, parent, id):
+		wx.Panel.__init__(self, parent, id)
+		self.list = wx.ListCtrl(self, id, style=wx.LC_REPORT | wx.LC_HRULES | wx.LC_VRULES)
+		self.list.InsertColumn(0, 'Name')
+		self.list.InsertColumn(1, 'Address')
+		self.list.InsertColumn(2, 'Port')
+		self.list.InsertColumn(3, 'Options')
+		self.list.InsertColumn(4, 'Weight')
+
+		hbox = wx.BoxSizer(wx.HORIZONTAL)
+		hbox.Add(self.list, 1, wx.EXPAND)
+		self.SetSizer(hbox)
+		self.refresh()
+
+	class ContextMenu(wx.Menu):
+		def __init__(self, item):
+			wx.Menu.__init__(self)
+
+			self.item = item
+
+			disconnect = wx.MenuItem(self, -1, 'Disconnect')
+			self.AppendItem(disconnect)
+			self.Bind(wx.EVT_MENU, self.OnDisconnect, id=disconnect.GetId())
+
+		def OnDisconnect(self, event):
+			vpn.disconnect(self.item[0])
+
+	def OnContext(self, event):
+		i = event.GetIndex()
+		self.PopupMenu(self.ContextMenu(self.list.itemDataMap[event.GetIndex()]), event.GetPosition())
+
+	def refresh(self):
+		self.list.itemDataMap = {}
+		i = 0
+
+		for key, connection in vpn.connections.items():
+			if self.list.GetItemCount() <= i:
+				self.list.InsertStringItem(i, connection.name)
+			else:
+				self.list.SetStringItem(i, 0, connection.name)
+			self.list.SetStringItem(i, 1, connection.address)
+			self.list.SetStringItem(i, 2, connection.port)
+			self.list.SetStringItem(i, 3, str(connection.options))
+			self.list.SetStringItem(i, 4, str(connection.weight))
+			self.list.itemDataMap[i] = (connection.name, connection.address, connection.port, connection.options, connection.weight)
+			self.list.Bind(wx.EVT_LIST_ITEM_RIGHT_CLICK, self.OnContext)
+			i += 1
+
+		while self.list.GetItemCount() > i:
+			self.list.DeleteItem(self.list.GetItemCount() - 1)
+
+
+class NodesPage(wx.Panel):
+	def __init__(self, parent, id):
+		wx.Panel.__init__(self, parent, id)
+		self.list = SuperListCtrl(self, id)
+		self.list.InsertColumn( 0, 'Name')
+		self.list.InsertColumn( 1, 'Address')
+		self.list.InsertColumn( 2, 'Port')
+		self.list.InsertColumn( 3, 'Cipher')
+		self.list.InsertColumn( 4, 'Digest')
+		self.list.InsertColumn( 5, 'MACLength')
+		self.list.InsertColumn( 6, 'Compression')
+		self.list.InsertColumn( 7, 'Options')
+		self.list.InsertColumn( 8, 'Status')
+		self.list.InsertColumn( 9, 'Nexthop')
+		self.list.InsertColumn(10, 'Via')
+		self.list.InsertColumn(11, 'Distance')
+		self.list.InsertColumn(12, 'PMTU')
+		self.list.InsertColumn(13, 'Min MTU')
+		self.list.InsertColumn(14, 'Max MTU')
+
+		hbox = wx.BoxSizer(wx.HORIZONTAL)
+		hbox.Add(self.list, 1, wx.EXPAND)
+		self.SetSizer(hbox)
+		self.refresh()
+
+	def refresh(self):
+		self.list.itemDataMap = {}
+		i = 0
+
+		for key, node in vpn.nodes.items():
+			if self.list.GetItemCount() <= i:
+				self.list.InsertStringItem(i, node.name)
+			else:
+				self.list.SetStringItem(i,  0, node.name)
+			self.list.SetStringItem(i,  1, node.address)
+			self.list.SetStringItem(i,  2, node.port)
+			self.list.SetStringItem(i,  3, str(node.cipher))
+			self.list.SetStringItem(i,  4, str(node.digest))
+			self.list.SetStringItem(i,  5, str(node.maclength))
+			self.list.SetStringItem(i,  6, str(node.compression))
+			self.list.SetStringItem(i,  7, str(node.options))
+			self.list.SetStringItem(i,  8, str(node.status))
+			self.list.SetStringItem(i,  9, node.nexthop)
+			self.list.SetStringItem(i, 10, node.via)
+			self.list.SetStringItem(i, 11, str(node.distance))
+			self.list.SetStringItem(i, 12, str(node.pmtu))
+			self.list.SetStringItem(i, 13, str(node.minmtu))
+			self.list.SetStringItem(i, 14, str(node.maxmtu))
+			self.list.itemDataMap[i] = (node.name, node.address, node.port, node.cipher, node.digest, node.maclength, node.compression, node.options, node.status, node.nexthop, node.via, node.distance, node.pmtu, node.minmtu, node.maxmtu)
+			self.list.SetItemData(i, i)
+			i += 1
+
+		while self.list.GetItemCount() > i:
+			self.list.DeleteItem(self.list.GetItemCount() - 1)
+
+class EdgesPage(wx.Panel):
+	def __init__(self, parent, id):
+		wx.Panel.__init__(self, parent, id)
+		self.list = wx.ListCtrl(self, id, style=wx.LC_REPORT | wx.LC_HRULES | wx.LC_VRULES)
+		self.list.InsertColumn(0, 'From')
+		self.list.InsertColumn(1, 'To')
+		self.list.InsertColumn(2, 'Address')
+		self.list.InsertColumn(3, 'Port')
+		self.list.InsertColumn(4, 'Options')
+		self.list.InsertColumn(5, 'Weight')
+
+		hbox = wx.BoxSizer(wx.HORIZONTAL)
+		hbox.Add(self.list, 1, wx.EXPAND)
+		self.SetSizer(hbox)
+		self.refresh()
+
+	def refresh(self):
+		self.list.itemDataMap = {}
+		i = 0
+
+		for key, edge in vpn.edges.items():
+			if self.list.GetItemCount() <= i:
+				self.list.InsertStringItem(i, edge.fr)
+			else:
+				self.list.SetStringItem(i, 0, edge.fr)
+			self.list.SetStringItem(i, 1, edge.to)
+			self.list.SetStringItem(i, 2, edge.address)
+			self.list.SetStringItem(i, 3, edge.port)
+			self.list.SetStringItem(i, 4, str(edge.options))
+			self.list.SetStringItem(i, 5, str(edge.weight))
+			self.list.itemDataMap[i] = (edge.fr, edge.to, edge.address, edge.port, edge.options, edge.weight)
+			i += 1
+
+		while self.list.GetItemCount() > i:
+			self.list.DeleteItem(self.list.GetItemCount() - 1)
+
+class SubnetsPage(wx.Panel):
+	def __init__(self, parent, id):
+		wx.Panel.__init__(self, parent, id)
+		self.list = SuperListCtrl(self, id)
+		self.list.InsertColumn(0, 'Subnet', wx.LIST_FORMAT_RIGHT)
+		self.list.InsertColumn(1, 'Weight', wx.LIST_FORMAT_RIGHT)
+		self.list.InsertColumn(2, 'Owner')
+		hbox = wx.BoxSizer(wx.HORIZONTAL)
+		hbox.Add(self.list, 1, wx.EXPAND)
+		self.SetSizer(hbox)
+		self.refresh()
+
+	def refresh(self):
+		self.list.itemDataMap = {}
+		i = 0
+
+		for key, subnet in vpn.subnets.items():
+			if self.list.GetItemCount() <= i:
+				self.list.InsertStringItem(i, subnet.address + '/' + subnet.prefixlen)
+			else:
+				self.list.SetStringItem(i, 0, subnet.address + '/' + subnet.prefixlen)
+			self.list.SetStringItem(i, 1, subnet.weight)
+			self.list.SetStringItem(i, 2, subnet.owner)
+			self.list.itemDataMap[i] = (subnet.address + '/' + subnet.prefixlen, subnet.weight, subnet.owner)
+			i = i + 1
+
+		while self.list.GetItemCount() > i:
+			self.list.DeleteItem(self.list.GetItemCount() - 1)
+
+class StatusPage(wx.Panel):
+	def __init__(self, parent, id):
+		wx.Panel.__init__(self, parent, id)
+
+class GraphPage(wx.Window):
+	def __init__(self, parent, id):
+		wx.Window.__init__(self, parent, id)
+
+class NetPage(wx.Notebook):
+	def __init__(self, parent, id):
+		wx.Notebook.__init__(self, parent)
+		self.settings = SettingsPage(self, id)
+		self.connections = ConnectionsPage(self, id)
+		self.nodes = NodesPage(self, id)
+		self.edges = EdgesPage(self, id)
+		self.subnets = SubnetsPage(self, id)
+		self.graph = GraphPage(self, id)
+		self.status = StatusPage(self, id)
+
+		self.AddPage(self.settings, 'Settings')
+		#self.AddPage(self.status, 'Status')
+		self.AddPage(self.connections, 'Connections')
+		self.AddPage(self.nodes, 'Nodes')
+		self.AddPage(self.edges, 'Edges')
+		self.AddPage(self.subnets, 'Subnets')
+		#self.AddPage(self.graph, 'Graph')
+		
+
+class MainWindow(wx.Frame):
+	def OnQuit(self, event):
+		self.Close(True)
+
+	def OnTimer(self, event):
+		vpn.refresh()
+		self.np.nodes.refresh()
+		self.np.subnets.refresh()
+		self.np.edges.refresh()
+		self.np.connections.refresh()
+
+	def __init__(self, parent, id, title):
+		wx.Frame.__init__(self, parent, id, title)
+
+		menubar = wx.MenuBar()
+		file = wx.Menu()
+		file.Append(1, '&Quit\tCtrl-X', 'Quit tinc GUI')
+		menubar.Append(file, '&File')
+
+		#nb = wx.Notebook(self, -1)
+		#nb.SetPadding((0, 0))
+		self.np = NetPage(self, -1)
+		#nb.AddPage(np, 'VPN')
+		
+		self.timer = wx.Timer(self, -1)
+		self.Bind(wx.EVT_TIMER, self.OnTimer, self.timer)
+		self.timer.Start(1000)
+		self.Bind(wx.EVT_MENU, self.OnQuit, id=1)
+		self.SetMenuBar(menubar)
+		self.Show()
+
+app = wx.App()
+mw = MainWindow(None, -1, 'Tinc GUI')
+
+#def OnTaskBarIcon(event):
+#	mw.Raise()
+#
+#icon = wx.Icon("tincgui.ico", wx.BITMAP_TYPE_PNG)
+#taskbaricon = wx.TaskBarIcon()
+#taskbaricon.SetIcon(icon, 'Tinc GUI')
+#wx.EVT_TASKBAR_RIGHT_UP(taskbaricon, OnTaskBarIcon)
+
+app.MainLoop()
+vpn.close()

have.h

@@ -1,10 +1,7 @@
-#ifndef TINC_HAVE_H
-#define TINC_HAVE_H
-
 /*
     have.h -- include headers which are known to exist
     Copyright (C) 1998-2005 Ivo Timmermans
-                  2003-2015 Guus Sliepen <guus@tinc-vpn.org>
+                  2003-2011 Guus Sliepen <guus@tinc-vpn.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -21,32 +18,30 @@
     51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 */
 
+#ifndef __TINC_HAVE_H__
+#define __TINC_HAVE_H__
+
 #ifdef HAVE_MINGW
 #ifdef WITH_WINDOWS2000
 #define WINVER Windows2000
 #else
 #define WINVER WindowsXP
 #endif
+#define WIN32_LEAN_AND_MEAN
 #endif
 
 #include <stdio.h>
-#include <stdbool.h>
-#include <stdint.h>
-#include <inttypes.h>
 #include <stdlib.h>
 #include <stdarg.h>
 #include <string.h>
 #include <ctype.h>
+#include <signal.h>
 #include <errno.h>
-#include <limits.h>
-
 #include <fcntl.h>
 #include <unistd.h>
-#include <signal.h>
 
 #ifdef HAVE_MINGW
 #include <w32api.h>
-#include <winsock2.h>
 #include <windows.h>
 #include <ws2tcpip.h>
 #endif
@@ -59,8 +54,8 @@
 #include <termios.h>
 #endif
 
-#ifdef HAVE_ALLOCA_H
+#ifdef HAVE_INTTYPES_H
-#include <alloca.h>
+#include <inttypes.h>
 #endif
 
 /* Include system specific headers */
@@ -109,6 +104,10 @@
 #include <sys/uio.h>
 #endif
 
+#ifdef HAVE_SYS_UN_H
+#include <sys/un.h>
+#endif
+
 #ifdef HAVE_DIRENT_H
 #include <dirent.h>
 #endif
@@ -196,19 +195,8 @@
 #include <netinet/if_ether.h>
 #endif
 
-#ifdef HAVE_ARPA_NAMESER_H
+#ifdef HAVE_EVENT_H
-#include <arpa/nameser.h>
+#include <event.h>
-#ifdef STATUS
-#undef STATUS
-#endif
 #endif
 
-#ifdef HAVE_RESOLV_H
+#endif /* __TINC_SYSTEM_H__ */
-#include <resolv.h>
-#endif
-
-#ifdef HAVE_LINUX_IF_TUN_H
-#include <linux/if_tun.h>
-#endif
-
-#endif

install-sh

@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2018-03-11.20; # UTC
+scriptversion=2009-04-28.21; # UTC
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -35,21 +35,25 @@ scriptversion=2018-03-11.20; # UTC
 # FSF changes to this file are in the public domain.
 #
 # Calling this script install-sh is preferred over install.sh, to prevent
-# 'make' implicit rules from creating a file called install from it
+# `make' implicit rules from creating a file called install from it
 # when there is no Makefile.
 #
 # This script is compatible with the BSD install script, but was written
 # from scratch.
 
-tab='	'
 nl='
 '
-IFS=" $tab$nl"
+IFS=" ""	$nl"
 
-# Set DOITPROG to "echo" to test this script.
+# set DOITPROG to echo to test this script
 
+# Don't use :- since 4.3BSD and earlier shells don't like it.
 doit=${DOITPROG-}
-doit_exec=${doit:-exec}
+if test -z "$doit"; then
+  doit_exec=exec
+else
+  doit_exec=$doit
+fi
 
 # Put in absolute file names if you don't have them in your path;
 # or use environment vars.
@@ -64,6 +68,17 @@ mvprog=${MVPROG-mv}
 rmprog=${RMPROG-rm}
 stripprog=${STRIPPROG-strip}
 
+posix_glob='?'
+initialize_posix_glob='
+  test "$posix_glob" != "?" || {
+    if (set -f) 2>/dev/null; then
+      posix_glob=
+    else
+      posix_glob=:
+    fi
+  }
+'
+
 posix_mkdir=
 
 # Desired mode of installed file.
@@ -82,7 +97,7 @@ dir_arg=
 dst_arg=
 
 copy_on_change=false
-is_target_a_directory=possibly
+no_target_directory=
 
 usage="\
 Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
@@ -128,7 +143,8 @@ while test $# -ne 0; do
 
     -m) mode=$2
 	case $mode in
-          *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
+	  *' '* | *'	'* | *'
+'*	  | *'*'* | *'?'* | *'['*)
 	    echo "$0: invalid mode: $mode" >&2
 	    exit 1;;
 	esac
@@ -139,16 +155,10 @@ while test $# -ne 0; do
 
     -s) stripcmd=$stripprog;;
 
-    -t)
+    -t) dst_arg=$2
-        is_target_a_directory=always
-        dst_arg=$2
-        # Protect names problematic for 'test' and other utilities.
-        case $dst_arg in
-          -* | [=\(\)!]) dst_arg=./$dst_arg;;
-        esac
 	shift;;
 
-    -T) is_target_a_directory=never;;
+    -T) no_target_directory=true;;
 
     --version) echo "$0 $scriptversion"; exit $?;;
 
@@ -163,16 +173,6 @@ while test $# -ne 0; do
   shift
 done
 
-# We allow the use of options -d and -T together, by making -d
-# take the precedence; this is for compatibility with GNU install.
-
-if test -n "$dir_arg"; then
-  if test -n "$dst_arg"; then
-    echo "$0: target directory not allowed when installing a directory." >&2
-    exit 1
-  fi
-fi
-
 if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
   # When -d is used, all remaining arguments are directories to create.
   # When -t is used, the destination is already specified.
@@ -186,10 +186,6 @@ if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
     fi
     shift # arg
     dst_arg=$arg
-    # Protect names problematic for 'test' and other utilities.
-    case $dst_arg in
-      -* | [=\(\)!]) dst_arg=./$dst_arg;;
-    esac
   done
 fi
 
@@ -198,26 +194,13 @@ if test $# -eq 0; then
     echo "$0: no input file specified." >&2
     exit 1
   fi
-  # It's OK to call 'install-sh -d' without argument.
+  # It's OK to call `install-sh -d' without argument.
   # This can happen when creating conditional directories.
   exit 0
 fi
 
 if test -z "$dir_arg"; then
-  if test $# -gt 1 || test "$is_target_a_directory" = always; then
+  trap '(exit $?); exit' 1 2 13 15
-    if test ! -d "$dst_arg"; then
-      echo "$0: $dst_arg: Is not a directory." >&2
-      exit 1
-    fi
-  fi
-fi
-
-if test -z "$dir_arg"; then
-  do_exit='(exit $ret); exit $ret'
-  trap "ret=129; $do_exit" 1
-  trap "ret=130; $do_exit" 2
-  trap "ret=141; $do_exit" 13
-  trap "ret=143; $do_exit" 15
 
   # Set umask so as not to create temps with too-generous modes.
   # However, 'strip' requires both read and write access to temps.
@@ -245,9 +228,9 @@ fi
 
 for src
 do
-  # Protect names problematic for 'test' and other utilities.
+  # Protect names starting with `-'.
   case $src in
-    -* | [=\(\)!]) src=./$src;;
+    -*) src=./$src;;
   esac
 
   if test -n "$dir_arg"; then
@@ -269,33 +252,56 @@ do
       echo "$0: no destination specified." >&2
       exit 1
     fi
-    dst=$dst_arg
 
-    # If destination is a directory, append the input filename.
+    dst=$dst_arg
+    # Protect names starting with `-'.
+    case $dst in
+      -*) dst=./$dst;;
+    esac
+
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
     if test -d "$dst"; then
-      if test "$is_target_a_directory" = never; then
+      if test -n "$no_target_directory"; then
 	echo "$0: $dst_arg: Is a directory" >&2
 	exit 1
       fi
       dstdir=$dst
-      dstbase=`basename "$src"`
+      dst=$dstdir/`basename "$src"`
-      case $dst in
-	*/) dst=$dst$dstbase;;
-	*)  dst=$dst/$dstbase;;
-      esac
       dstdir_status=0
     else
-      dstdir=`dirname "$dst"`
+      # Prefer dirname, but fall back on a substitute if dirname fails.
+      dstdir=`
+	(dirname "$dst") 2>/dev/null ||
+	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	     X"$dst" : 'X\(//\)[^/]' \| \
+	     X"$dst" : 'X\(//\)$' \| \
+	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+	echo X"$dst" |
+	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)[^/].*/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\).*/{
+		   s//\1/
+		   q
+		 }
+		 s/.*/./; q'
+      `
+
       test -d "$dstdir"
       dstdir_status=$?
     fi
   fi
 
-  case $dstdir in
-    */) dstdirslash=$dstdir;;
-    *)  dstdirslash=$dstdir/;;
-  esac
-
   obsolete_mkdir_used=false
 
   if test $dstdir_status != 0; then
@@ -332,43 +338,34 @@ do
 	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
 	    ;;
 	  *)
-            # Note that $RANDOM variable is not portable (e.g. dash);  Use it
-            # here however when possible just to lower collision chance.
 	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
 
-            trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0
-
-            # Because "mkdir -p" follows existing symlinks and we likely work
-            # directly in world-writeable /tmp, make sure that the '$tmpdir'
-            # directory is successfully created first before we actually test
-            # 'mkdir -p' feature.
 	    if (umask $mkdir_umask &&
-                $mkdirprog $mkdir_mode "$tmpdir" &&
+		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
-                exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
 	    then
 	      if test -z "$dir_arg" || {
 		   # Check for POSIX incompatibilities with -m.
 		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-                   # other-writable bit of parent directory when it shouldn't.
+		   # other-writeable bit of parent directory when it shouldn't.
 		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
-                   test_tmpdir="$tmpdir/a"
+		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
-                   ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
 		   case $ls_ld_tmpdir in
 		     d????-?r-*) different_mode=700;;
 		     d????-?--*) different_mode=755;;
 		     *) false;;
 		   esac &&
-                   $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
+		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
-                     ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
+		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
 		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
 		   }
 		 }
 	      then posix_mkdir=:
 	      fi
-              rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
+	      rmdir "$tmpdir/d" "$tmpdir"
 	    else
 	      # Remove any dirs left behind by ancient mkdir implementations.
-              rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
+	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
 	    fi
 	    trap '' 0;;
 	esac;;
@@ -388,23 +385,25 @@ do
 
       case $dstdir in
 	/*) prefix='/';;
-        [-=\(\)!]*) prefix='./';;
+	-*) prefix='./';;
 	*)  prefix='';;
       esac
 
+      eval "$initialize_posix_glob"
+
       oIFS=$IFS
       IFS=/
-      set -f
+      $posix_glob set -f
       set fnord $dstdir
       shift
-      set +f
+      $posix_glob set +f
       IFS=$oIFS
 
       prefixes=
 
       for d
       do
-        test X"$d" = X && continue
+	test -z "$d" && continue
 
 	prefix=$prefix$d
 	if test -d "$prefix"; then
@@ -444,8 +443,8 @@ do
   else
 
     # Make a couple of temp file names in the proper directory.
-    dsttmp=${dstdirslash}_inst.$$_
+    dsttmp=$dstdir/_inst.$$_
-    rmtmp=${dstdirslash}_rm.$$_
+    rmtmp=$dstdir/_rm.$$_
 
     # Trap to clean up those temp files at exit.
     trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
@@ -468,10 +467,13 @@ do
     if $copy_on_change &&
        old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
        new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
-       set -f &&
+
+       eval "$initialize_posix_glob" &&
+       $posix_glob set -f &&
        set X $old && old=:$2:$4:$5:$6 &&
        set X $new && new=:$2:$4:$5:$6 &&
-       set +f &&
+       $posix_glob set +f &&
+
        test "$old" = "$new" &&
        $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
     then
@@ -510,9 +512,9 @@ do
 done
 
 # Local variables:
-# eval: (add-hook 'before-save-hook 'time-stamp)
+# eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC0"
+# time-stamp-time-zone: "UTC"
 # time-stamp-end: "; # UTC"
 # End:

m4/Makefile.am

@@ -0,0 +1,4 @@
+## Process this file with automake to produce Makefile.in   -*-Makefile-*-
+
+EXTRA_DIST = README *.m4
+

m4/Makefile.in

@@ -0,0 +1,335 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = m4
+DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/attribute.m4 \
+	$(top_srcdir)/m4/curses.m4 $(top_srcdir)/m4/libevent.m4 \
+	$(top_srcdir)/m4/lzo.m4 $(top_srcdir)/m4/openssl.m4 \
+	$(top_srcdir)/m4/zlib.m4 $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+SOURCES =
+DIST_SOURCES =
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSES_LIBS = @CURSES_LIBS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GREP = @GREP@
+INCLUDES = @INCLUDES@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@
+LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@
+LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+EXTRA_DIST = README *.m4
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu m4/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu m4/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic distclean \
+	distclean-generic distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic pdf pdf-am ps ps-am uninstall uninstall-am
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

m4/README

@@ -0,0 +1,8 @@
+These files are used by a program called aclocal (part of the GNU automake
+package).  aclocal uses these files to create aclocal.m4 which is in turn
+used by autoconf to create the configure script at the the top level in
+this distribution.
+
+The Makefile.am file in this directory is automatically generated
+from the template file, Makefile.am.in.  The generation will fail
+if you don't have all the right tools.

m4/attribute.m4

@@ -9,8 +9,8 @@ AC_DEFUN([tinc_ATTRIBUTE],
     CFLAGS="$CFLAGS -Wall -Werror"
     AC_COMPILE_IFELSE(
       [AC_LANG_SOURCE(
-        [void *test(void) __attribute__ (($1));
+        [void test(void) __attribute__ (($1));
-	 void *test(void) { return (void *)0; }
+	 void test(void) { return; }
 	],
        )],
        [tinc_cv_attribute_$1=yes],

m4/ax_append_flag.m4

@@ -1,69 +0,0 @@
-# ===========================================================================
-#      http://www.gnu.org/software/autoconf-archive/ax_append_flag.html
-# ===========================================================================
-#
-# SYNOPSIS
-#
-#   AX_APPEND_FLAG(FLAG, [FLAGS-VARIABLE])
-#
-# DESCRIPTION
-#
-#   FLAG is appended to the FLAGS-VARIABLE shell variable, with a space
-#   added in between.
-#
-#   If FLAGS-VARIABLE is not specified, the current language's flags (e.g.
-#   CFLAGS) is used.  FLAGS-VARIABLE is not changed if it already contains
-#   FLAG.  If FLAGS-VARIABLE is unset in the shell, it is set to exactly
-#   FLAG.
-#
-#   NOTE: Implementation based on AX_CFLAGS_GCC_OPTION.
-#
-# LICENSE
-#
-#   Copyright (c) 2008 Guido U. Draheim <guidod@gmx.de>
-#   Copyright (c) 2011 Maarten Bosmans <mkbosmans@gmail.com>
-#
-#   This program is free software: you can redistribute it and/or modify it
-#   under the terms of the GNU General Public License as published by the
-#   Free Software Foundation, either version 3 of the License, or (at your
-#   option) any later version.
-#
-#   This program is distributed in the hope that it will be useful, but
-#   WITHOUT ANY WARRANTY; without even the implied warranty of
-#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
-#   Public License for more details.
-#
-#   You should have received a copy of the GNU General Public License along
-#   with this program. If not, see <http://www.gnu.org/licenses/>.
-#
-#   As a special exception, the respective Autoconf Macro's copyright owner
-#   gives unlimited permission to copy, distribute and modify the configure
-#   scripts that are the output of Autoconf when processing the Macro. You
-#   need not follow the terms of the GNU General Public License when using
-#   or distributing such scripts, even though portions of the text of the
-#   Macro appear in them. The GNU General Public License (GPL) does govern
-#   all other use of the material that constitutes the Autoconf Macro.
-#
-#   This special exception to the GPL applies to versions of the Autoconf
-#   Macro released by the Autoconf Archive. When you make and distribute a
-#   modified version of the Autoconf Macro, you may extend this special
-#   exception to the GPL to apply to your modified version as well.
-
-#serial 2
-
-AC_DEFUN([AX_APPEND_FLAG],
-[AC_PREREQ(2.59)dnl for _AC_LANG_PREFIX
-AS_VAR_PUSHDEF([FLAGS], [m4_default($2,_AC_LANG_PREFIX[FLAGS])])dnl
-AS_VAR_SET_IF(FLAGS,
-  [case " AS_VAR_GET(FLAGS) " in
-    *" $1 "*)
-      AC_RUN_LOG([: FLAGS already contains $1])
-      ;;
-    *)
-      AC_RUN_LOG([: FLAGS="$FLAGS $1"])
-      AS_VAR_SET(FLAGS, ["AS_VAR_GET(FLAGS) $1"])
-      ;;
-   esac],
-  [AS_VAR_SET(FLAGS,["$1"])])
-AS_VAR_POPDEF([FLAGS])dnl
-])dnl AX_APPEND_FLAG

m4/ax_cflags_warn_all.m4

@@ -1,122 +0,0 @@
-# ===========================================================================
-#    http://www.gnu.org/software/autoconf-archive/ax_cflags_warn_all.html
-# ===========================================================================
-#
-# SYNOPSIS
-#
-#   AX_CFLAGS_WARN_ALL   [(shellvar [,default, [A/NA]])]
-#   AX_CXXFLAGS_WARN_ALL [(shellvar [,default, [A/NA]])]
-#   AX_FCFLAGS_WARN_ALL  [(shellvar [,default, [A/NA]])]
-#
-# DESCRIPTION
-#
-#   Try to find a compiler option that enables most reasonable warnings.
-#
-#   For the GNU compiler it will be -Wall (and -ansi -pedantic) The result
-#   is added to the shellvar being CFLAGS, CXXFLAGS, or FCFLAGS by default.
-#
-#   Currently this macro knows about the GCC, Solaris, Digital Unix, AIX,
-#   HP-UX, IRIX, NEC SX-5 (Super-UX 10), Cray J90 (Unicos 10.0.0.8), and
-#   Intel compilers.  For a given compiler, the Fortran flags are much more
-#   experimental than their C equivalents.
-#
-#    - $1 shell-variable-to-add-to : CFLAGS, CXXFLAGS, or FCFLAGS
-#    - $2 add-value-if-not-found : nothing
-#    - $3 action-if-found : add value to shellvariable
-#    - $4 action-if-not-found : nothing
-#
-#   NOTE: These macros depend on AX_APPEND_FLAG.
-#
-# LICENSE
-#
-#   Copyright (c) 2008 Guido U. Draheim <guidod@gmx.de>
-#   Copyright (c) 2010 Rhys Ulerich <rhys.ulerich@gmail.com>
-#
-#   This program is free software; you can redistribute it and/or modify it
-#   under the terms of the GNU General Public License as published by the
-#   Free Software Foundation; either version 3 of the License, or (at your
-#   option) any later version.
-#
-#   This program is distributed in the hope that it will be useful, but
-#   WITHOUT ANY WARRANTY; without even the implied warranty of
-#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
-#   Public License for more details.
-#
-#   You should have received a copy of the GNU General Public License along
-#   with this program. If not, see <http://www.gnu.org/licenses/>.
-#
-#   As a special exception, the respective Autoconf Macro's copyright owner
-#   gives unlimited permission to copy, distribute and modify the configure
-#   scripts that are the output of Autoconf when processing the Macro. You
-#   need not follow the terms of the GNU General Public License when using
-#   or distributing such scripts, even though portions of the text of the
-#   Macro appear in them. The GNU General Public License (GPL) does govern
-#   all other use of the material that constitutes the Autoconf Macro.
-#
-#   This special exception to the GPL applies to versions of the Autoconf
-#   Macro released by the Autoconf Archive. When you make and distribute a
-#   modified version of the Autoconf Macro, you may extend this special
-#   exception to the GPL to apply to your modified version as well.
-
-#serial 15
-
-AC_DEFUN([AX_FLAGS_WARN_ALL],[dnl
-AS_VAR_PUSHDEF([FLAGS],[_AC_LANG_PREFIX[]FLAGS])dnl
-AS_VAR_PUSHDEF([VAR],[ac_cv_[]_AC_LANG_ABBREV[]flags_warn_all])dnl
-AC_CACHE_CHECK([m4_ifval($1,$1,FLAGS) for maximum warnings],
-VAR,[VAR="no, unknown"
-ac_save_[]FLAGS="$[]FLAGS"
-for ac_arg dnl
-in "-warn all  % -warn all"   dnl Intel
-   "-pedantic  % -Wall"       dnl GCC
-   "-xstrconst % -v"          dnl Solaris C
-   "-std1      % -verbose -w0 -warnprotos" dnl Digital Unix
-   "-qlanglvl=ansi % -qsrcmsg -qinfo=all:noppt:noppc:noobs:nocnd" dnl AIX
-   "-ansi -ansiE % -fullwarn" dnl IRIX
-   "+ESlit     % +w1"         dnl HP-UX C
-   "-Xc        % -pvctl[,]fullmsg" dnl NEC SX-5 (Super-UX 10)
-   "-h conform % -h msglevel 2" dnl Cray C (Unicos)
-   #
-do FLAGS="$ac_save_[]FLAGS "`echo $ac_arg | sed -e 's,%%.*,,' -e 's,%,,'`
-   AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
-                     [VAR=`echo $ac_arg | sed -e 's,.*% *,,'` ; break])
-done
-FLAGS="$ac_save_[]FLAGS"
-])
-AS_VAR_POPDEF([FLAGS])dnl
-AX_REQUIRE_DEFINED([AX_APPEND_FLAG])
-case ".$VAR" in
-     .ok|.ok,*) m4_ifvaln($3,$3) ;;
-   .|.no|.no,*) m4_default($4,[m4_ifval($2,[AX_APPEND_FLAG([$2], [$1])])]) ;;
-   *) m4_default($3,[AX_APPEND_FLAG([$VAR], [$1])]) ;;
-esac
-AS_VAR_POPDEF([VAR])dnl
-])dnl AX_FLAGS_WARN_ALL
-dnl  implementation tactics:
-dnl   the for-argument contains a list of options. The first part of
-dnl   these does only exist to detect the compiler - usually it is
-dnl   a global option to enable -ansi or -extrawarnings. All other
-dnl   compilers will fail about it. That was needed since a lot of
-dnl   compilers will give false positives for some option-syntax
-dnl   like -Woption or -Xoption as they think of it is a pass-through
-dnl   to later compile stages or something. The "%" is used as a
-dnl   delimiter. A non-option comment can be given after "%%" marks
-dnl   which will be shown but not added to the respective C/CXXFLAGS.
-
-AC_DEFUN([AX_CFLAGS_WARN_ALL],[dnl
-AC_LANG_PUSH([C])
-AX_FLAGS_WARN_ALL([$1], [$2], [$3], [$4])
-AC_LANG_POP([C])
-])
-
-AC_DEFUN([AX_CXXFLAGS_WARN_ALL],[dnl
-AC_LANG_PUSH([C++])
-AX_FLAGS_WARN_ALL([$1], [$2], [$3], [$4])
-AC_LANG_POP([C++])
-])
-
-AC_DEFUN([AX_FCFLAGS_WARN_ALL],[dnl
-AC_LANG_PUSH([Fortran])
-AX_FLAGS_WARN_ALL([$1], [$2], [$3], [$4])
-AC_LANG_POP([Fortran])
-])

m4/ax_check_compile_flag.m4

@@ -1,72 +0,0 @@
-# ===========================================================================
-#   http://www.gnu.org/software/autoconf-archive/ax_check_compile_flag.html
-# ===========================================================================
-#
-# SYNOPSIS
-#
-#   AX_CHECK_COMPILE_FLAG(FLAG, [ACTION-SUCCESS], [ACTION-FAILURE], [EXTRA-FLAGS])
-#
-# DESCRIPTION
-#
-#   Check whether the given FLAG works with the current language's compiler
-#   or gives an error.  (Warnings, however, are ignored)
-#
-#   ACTION-SUCCESS/ACTION-FAILURE are shell commands to execute on
-#   success/failure.
-#
-#   If EXTRA-FLAGS is defined, it is added to the current language's default
-#   flags (e.g. CFLAGS) when the check is done.  The check is thus made with
-#   the flags: "CFLAGS EXTRA-FLAGS FLAG".  This can for example be used to
-#   force the compiler to issue an error when a bad flag is given.
-#
-#   NOTE: Implementation based on AX_CFLAGS_GCC_OPTION. Please keep this
-#   macro in sync with AX_CHECK_{PREPROC,LINK}_FLAG.
-#
-# LICENSE
-#
-#   Copyright (c) 2008 Guido U. Draheim <guidod@gmx.de>
-#   Copyright (c) 2011 Maarten Bosmans <mkbosmans@gmail.com>
-#
-#   This program is free software: you can redistribute it and/or modify it
-#   under the terms of the GNU General Public License as published by the
-#   Free Software Foundation, either version 3 of the License, or (at your
-#   option) any later version.
-#
-#   This program is distributed in the hope that it will be useful, but
-#   WITHOUT ANY WARRANTY; without even the implied warranty of
-#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
-#   Public License for more details.
-#
-#   You should have received a copy of the GNU General Public License along
-#   with this program. If not, see <http://www.gnu.org/licenses/>.
-#
-#   As a special exception, the respective Autoconf Macro's copyright owner
-#   gives unlimited permission to copy, distribute and modify the configure
-#   scripts that are the output of Autoconf when processing the Macro. You
-#   need not follow the terms of the GNU General Public License when using
-#   or distributing such scripts, even though portions of the text of the
-#   Macro appear in them. The GNU General Public License (GPL) does govern
-#   all other use of the material that constitutes the Autoconf Macro.
-#
-#   This special exception to the GPL applies to versions of the Autoconf
-#   Macro released by the Autoconf Archive. When you make and distribute a
-#   modified version of the Autoconf Macro, you may extend this special
-#   exception to the GPL to apply to your modified version as well.
-
-#serial 2
-
-AC_DEFUN([AX_CHECK_COMPILE_FLAG],
-[AC_PREREQ(2.59)dnl for _AC_LANG_PREFIX
-AS_VAR_PUSHDEF([CACHEVAR],[ax_cv_check_[]_AC_LANG_ABBREV[]flags_$4_$1])dnl
-AC_CACHE_CHECK([whether _AC_LANG compiler accepts $1], CACHEVAR, [
-  ax_check_save_flags=$[]_AC_LANG_PREFIX[]FLAGS
-  _AC_LANG_PREFIX[]FLAGS="$[]_AC_LANG_PREFIX[]FLAGS $4 $1"
-  AC_COMPILE_IFELSE([AC_LANG_PROGRAM()],
-    [AS_VAR_SET(CACHEVAR,[yes])],
-    [AS_VAR_SET(CACHEVAR,[no])])
-  _AC_LANG_PREFIX[]FLAGS=$ax_check_save_flags])
-AS_IF([test x"AS_VAR_GET(CACHEVAR)" = xyes],
-  [m4_default([$2], :)],
-  [m4_default([$3], :)])
-AS_VAR_POPDEF([CACHEVAR])dnl
-])dnl AX_CHECK_COMPILE_FLAGS

m4/ax_check_link_flag.m4

@@ -1,71 +0,0 @@
-# ===========================================================================
-#    http://www.gnu.org/software/autoconf-archive/ax_check_link_flag.html
-# ===========================================================================
-#
-# SYNOPSIS
-#
-#   AX_CHECK_LINK_FLAG(FLAG, [ACTION-SUCCESS], [ACTION-FAILURE], [EXTRA-FLAGS])
-#
-# DESCRIPTION
-#
-#   Check whether the given FLAG works with the linker or gives an error.
-#   (Warnings, however, are ignored)
-#
-#   ACTION-SUCCESS/ACTION-FAILURE are shell commands to execute on
-#   success/failure.
-#
-#   If EXTRA-FLAGS is defined, it is added to the linker's default flags
-#   when the check is done.  The check is thus made with the flags: "LDFLAGS
-#   EXTRA-FLAGS FLAG".  This can for example be used to force the linker to
-#   issue an error when a bad flag is given.
-#
-#   NOTE: Implementation based on AX_CFLAGS_GCC_OPTION. Please keep this
-#   macro in sync with AX_CHECK_{PREPROC,COMPILE}_FLAG.
-#
-# LICENSE
-#
-#   Copyright (c) 2008 Guido U. Draheim <guidod@gmx.de>
-#   Copyright (c) 2011 Maarten Bosmans <mkbosmans@gmail.com>
-#
-#   This program is free software: you can redistribute it and/or modify it
-#   under the terms of the GNU General Public License as published by the
-#   Free Software Foundation, either version 3 of the License, or (at your
-#   option) any later version.
-#
-#   This program is distributed in the hope that it will be useful, but
-#   WITHOUT ANY WARRANTY; without even the implied warranty of
-#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
-#   Public License for more details.
-#
-#   You should have received a copy of the GNU General Public License along
-#   with this program. If not, see <http://www.gnu.org/licenses/>.
-#
-#   As a special exception, the respective Autoconf Macro's copyright owner
-#   gives unlimited permission to copy, distribute and modify the configure
-#   scripts that are the output of Autoconf when processing the Macro. You
-#   need not follow the terms of the GNU General Public License when using
-#   or distributing such scripts, even though portions of the text of the
-#   Macro appear in them. The GNU General Public License (GPL) does govern
-#   all other use of the material that constitutes the Autoconf Macro.
-#
-#   This special exception to the GPL applies to versions of the Autoconf
-#   Macro released by the Autoconf Archive. When you make and distribute a
-#   modified version of the Autoconf Macro, you may extend this special
-#   exception to the GPL to apply to your modified version as well.
-
-#serial 2
-
-AC_DEFUN([AX_CHECK_LINK_FLAG],
-[AS_VAR_PUSHDEF([CACHEVAR],[ax_cv_check_ldflags_$4_$1])dnl
-AC_CACHE_CHECK([whether the linker accepts $1], CACHEVAR, [
-  ax_check_save_flags=$LDFLAGS
-  LDFLAGS="$LDFLAGS $4 $1"
-  AC_LINK_IFELSE([AC_LANG_PROGRAM()],
-    [AS_VAR_SET(CACHEVAR,[yes])],
-    [AS_VAR_SET(CACHEVAR,[no])])
-  LDFLAGS=$ax_check_save_flags])
-AS_IF([test x"AS_VAR_GET(CACHEVAR)" = xyes],
-  [m4_default([$2], :)],
-  [m4_default([$3], :)])
-AS_VAR_POPDEF([CACHEVAR])dnl
-])dnl AX_CHECK_LINK_FLAGS

m4/ax_require_defined.m4

@@ -1,37 +0,0 @@
-# ===========================================================================
-#    http://www.gnu.org/software/autoconf-archive/ax_require_defined.html
-# ===========================================================================
-#
-# SYNOPSIS
-#
-#   AX_REQUIRE_DEFINED(MACRO)
-#
-# DESCRIPTION
-#
-#   AX_REQUIRE_DEFINED is a simple helper for making sure other macros have
-#   been defined and thus are available for use.  This avoids random issues
-#   where a macro isn't expanded.  Instead the configure script emits a
-#   non-fatal:
-#
-#     ./configure: line 1673: AX_CFLAGS_WARN_ALL: command not found
-#
-#   It's like AC_REQUIRE except it doesn't expand the required macro.
-#
-#   Here's an example:
-#
-#     AX_REQUIRE_DEFINED([AX_CHECK_LINK_FLAG])
-#
-# LICENSE
-#
-#   Copyright (c) 2014 Mike Frysinger <vapier@gentoo.org>
-#
-#   Copying and distribution of this file, with or without modification, are
-#   permitted in any medium without royalty provided the copyright notice
-#   and this notice are preserved. This file is offered as-is, without any
-#   warranty.
-
-#serial 1
-
-AC_DEFUN([AX_REQUIRE_DEFINED], [dnl
-  m4_ifndef([$1], [m4_fatal([macro ]$1[ is not defined; is a m4 file missing?])])
-])dnl AX_REQUIRE_DEFINED

m4/curses.m4

@@ -0,0 +1,41 @@
+dnl Check to find the curses headers/libraries
+
+AC_DEFUN([tinc_CURSES],
+[
+  AC_ARG_ENABLE([curses],
+    AS_HELP_STRING([--disable-curses], [disable curses support]))
+  AS_IF([test "x$enable_curses" != "xno"], [
+  AC_DEFINE(HAVE_CURSES, 1, [have curses support])
+    curses=true
+    AC_ARG_WITH(curses,
+      AS_HELP_STRING([--with-curses=DIR], [curses base directory, or:]),
+      [curses="$withval"
+       CPPFLAGS="$CPPFLAGS -I$withval/include"
+       LDFLAGS="$LDFLAGS -L$withval/lib"]
+    )
+
+    AC_ARG_WITH(curses-include,
+      AS_HELP_STRING([--with-curses-include=DIR], [curses headers directory]),
+      [curses_include="$withval"
+       CPPFLAGS="$CPPFLAGS -I$withval"]
+    )
+
+    AC_ARG_WITH(curses-lib,
+      AS_HELP_STRING([--with-curses-lib=DIR], [curses library directory]),
+      [curses_lib="$withval"
+       LDFLAGS="$LDFLAGS -L$withval"]
+    )
+
+    AC_CHECK_HEADERS(curses.h,
+      [],
+      [AC_MSG_ERROR("curses header files not found."); break]
+    )
+
+    AC_CHECK_LIB(curses, initscr,
+      [CURSES_LIBS="-lcurses"],
+      [AC_MSG_ERROR("curses libraries not found.")]
+    )
+  ])
+
+  AC_SUBST(CURSES_LIBS)
+])

m4/libevent.m4

@@ -0,0 +1,33 @@
+dnl Check to find the libevent headers/libraries
+
+AC_DEFUN([tinc_LIBEVENT],
+[
+  AC_ARG_WITH(libevent,
+    AS_HELP_STRING([--with-libevent=DIR], [libevent base directory, or:]),
+    [libevent="$withval"
+     CPPFLAGS="$CPPFLAGS -I$withval/include"
+     LDFLAGS="$LDFLAGS -L$withval/lib"]
+  )
+
+  AC_ARG_WITH(libevent-include,
+    AS_HELP_STRING([--with-libevent-include=DIR], [libevent headers directory]),
+    [libevent_include="$withval"
+     CPPFLAGS="$CPPFLAGS -I$withval"]
+  )
+
+  AC_ARG_WITH(libevent-lib,
+    AS_HELP_STRING([--with-libevent-lib=DIR], [libevent library directory]),
+    [libevent_lib="$withval"
+     LDFLAGS="$LDFLAGS -L$withval"]
+  )
+
+  AC_CHECK_HEADERS(event.h,
+    [],
+    [AC_MSG_ERROR("libevent header files not found."); break]
+  )
+
+  AC_CHECK_LIB(event, event_init,
+    [LIBS="-levent $LIBS"],
+    [AC_MSG_ERROR("libevent libraries not found.")]
+  )
+])

m4/openssl.m4

@@ -1,4 +1,4 @@
-dnl Check to find the LibreSSL/OpenSSL headers/libraries
+dnl Check to find the OpenSSL headers/libraries
 
 AC_DEFUN([tinc_OPENSSL],
 [
@@ -10,49 +10,47 @@ AC_DEFUN([tinc_OPENSSL],
         [],
         [AC_CHECK_LIB(dl, dlopen,
           [LIBS="$LIBS -ldl"],
-          [AC_MSG_ERROR([LibreSSL/OpenSSL depends on libdl.]); break]
+          [AC_MSG_ERROR([OpenSSL depends on libdl.]); break]
         )]
       )
     ;;
   esac
 
   AC_ARG_WITH(openssl,
-    AS_HELP_STRING([--with-openssl=DIR], [LibreSSL/OpenSSL base directory, or:]),
+    AS_HELP_STRING([--with-openssl=DIR], [OpenSSL base directory, or:]),
     [openssl="$withval"
      CPPFLAGS="$CPPFLAGS -I$withval/include"
      LDFLAGS="$LDFLAGS -L$withval/lib"]
   )
 
   AC_ARG_WITH(openssl-include,
-    AS_HELP_STRING([--with-openssl-include=DIR], [LibreSSL/OpenSSL headers directory (without trailing /openssl)]),
+    AS_HELP_STRING([--with-openssl-include=DIR], [OpenSSL headers directory (without trailing /openssl)]),
     [openssl_include="$withval"
      CPPFLAGS="$CPPFLAGS -I$withval"]
   )
 
   AC_ARG_WITH(openssl-lib,
-    AS_HELP_STRING([--with-openssl-lib=DIR], [LibreSSL/OpenSSL library directory]),
+    AS_HELP_STRING([--with-openssl-lib=DIR], [OpenSSL library directory]),
     [openssl_lib="$withval"
      LDFLAGS="$LDFLAGS -L$withval"]
   )
 
   AC_CHECK_HEADERS(openssl/evp.h openssl/rsa.h openssl/rand.h openssl/err.h openssl/sha.h openssl/pem.h openssl/engine.h,
     [],
-    [AC_MSG_ERROR([LibreSSL/OpenSSL header files not found.]); break]
+    [AC_MSG_ERROR([OpenSSL header files not found.]); break]
   )
 
   AC_CHECK_LIB(crypto, EVP_EncryptInit_ex,
     [LIBS="-lcrypto $LIBS"],
-    [AC_MSG_ERROR([LibreSSL/OpenSSL libraries not found.])]
+    [AC_MSG_ERROR([OpenSSL libraries not found.])]
   )
 
-  AC_CHECK_FUNCS([RAND_bytes EVP_EncryptInit_ex EVP_CIPHER_CTX_new], ,
+  AC_CHECK_FUNCS([RAND_pseudo_bytes EVP_EncryptInit_ex], ,
-    [AC_MSG_ERROR([Missing LibreSSL/OpenSSL functionality, make sure you have installed the latest version.]); break],
+    [AC_MSG_ERROR([Missing OpenSSL functionality, make sure you have installed the latest version.]); break],
   )
 
-  AC_CHECK_DECLS([OpenSSL_add_all_algorithms, EVP_aes_256_cfb], ,
+  AC_CHECK_DECL([OpenSSL_add_all_algorithms], ,
-    [AC_MSG_ERROR([Missing LibreSSL/OpenSSL functionality, make sure you have installed the latest version.]); break],
+    [AC_MSG_ERROR([Missing OpenSSL functionality, make sure you have installed the latest version.]); break],
     [#include <openssl/evp.h>]
   )
-
-  AC_CHECK_FUNCS([BN_GENCB_new RSA_set0_key], , , [#include <openssl/rsa.h>])
 ])

missing

@@ -1,10 +1,11 @@
 #! /bin/sh
-# Common wrapper for a few potentially missing GNU programs.
+# Common stub for a few missing GNU programs while installing.
 
-scriptversion=2018-03-07.03; # UTC
+scriptversion=2009-04-28.21; # UTC
 
-# Copyright (C) 1996-2018 Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
-# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+# 2008, 2009 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -17,7 +18,7 @@ scriptversion=2018-03-07.03; # UTC
 # GNU General Public License for more details.
 
 # You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -25,40 +26,69 @@ scriptversion=2018-03-07.03; # UTC
 # the same distribution terms that you use for the rest of that program.
 
 if test $# -eq 0; then
-  echo 1>&2 "Try '$0 --help' for more information"
+  echo 1>&2 "Try \`$0 --help' for more information"
   exit 1
 fi
 
+run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+  configure_ac=configure.ac
+else
+  configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
 case $1 in
-
+--run)
-  --is-lightweight)
+  # Try to run requested program, and just exit if it succeeds.
-    # Used by our autoconf macros to check whether the available missing
+  run=
-    # script is modern enough.
-    exit 0
-    ;;
-
-  --run)
-    # Back-compat with the calling convention used by older automake.
   shift
+  "$@" && exit 0
+  # Exit code 63 means version mismatch.  This often happens
+  # when the user try to use an ancient version of a tool on
+  # a file that requires a minimum version.  In this case we
+  # we should proceed has if the program had been absent, or
+  # if --run hadn't been passed.
+  if test $? = 63; then
+    run=:
+    msg="probably too old"
+  fi
   ;;
 
   -h|--h|--he|--hel|--help)
     echo "\
 $0 [OPTION]... PROGRAM [ARGUMENT]...
 
-Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-to PROGRAM being missing or too old.
+error status if there is no known handling for PROGRAM.
 
 Options:
   -h, --help      display this help and exit
   -v, --version   output version information and exit
+  --run           try to run the given command, and emulate it if it fails
 
 Supported PROGRAM values:
-  aclocal   autoconf  autoheader   autom4te  automake  makeinfo
+  aclocal      touch file \`aclocal.m4'
-  bison     yacc      flex         lex       help2man
+  autoconf     touch file \`configure'
+  autoheader   touch file \`config.h.in'
+  autom4te     touch the output file, or create a stub one
+  automake     touch all \`Makefile.in' files
+  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
+  flex         create \`lex.yy.c', if possible, from existing .c
+  help2man     touch the output file
+  lex          create \`lex.yy.c', if possible, from existing .c
+  makeinfo     touch the output file
+  tar          try tar, gnutar, gtar, then tar without non-portable flags
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
 
-Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
+Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
-'g' are ignored when checking the name.
+\`g' are ignored when checking the name.
 
 Send bug reports to <bug-automake@gnu.org>."
     exit $?
@@ -70,146 +100,277 @@ Send bug reports to <bug-automake@gnu.org>."
     ;;
 
   -*)
-    echo 1>&2 "$0: unknown '$1' option"
+    echo 1>&2 "$0: Unknown \`$1' option"
-    echo 1>&2 "Try '$0 --help' for more information"
+    echo 1>&2 "Try \`$0 --help' for more information"
     exit 1
     ;;
 
 esac
 
-# Run the given program, remember its exit status.
+# normalize program name to check for.
-"$@"; st=$?
+program=`echo "$1" | sed '
-
-# If it succeeded, we are done.
-test $st -eq 0 && exit 0
-
-# Also exit now if we it failed (or wasn't found), and '--version' was
-# passed; such an option is passed most likely to detect whether the
-# program is present and works.
-case $2 in --version|--help) exit $st;; esac
-
-# Exit code 63 means version mismatch.  This often happens when the user
-# tries to use an ancient version of a tool on a file that requires a
-# minimum version.
-if test $st -eq 63; then
-  msg="probably too old"
-elif test $st -eq 127; then
-  # Program was missing.
-  msg="missing on your system"
-else
-  # Program was found and executed, but failed.  Give up.
-  exit $st
-fi
-
-perl_URL=https://www.perl.org/
-flex_URL=https://github.com/westes/flex
-gnu_software_URL=https://www.gnu.org/software
-
-program_details ()
-{
-  case $1 in
-    aclocal|automake)
-      echo "The '$1' program is part of the GNU Automake package:"
-      echo "<$gnu_software_URL/automake>"
-      echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
-      echo "<$gnu_software_URL/autoconf>"
-      echo "<$gnu_software_URL/m4/>"
-      echo "<$perl_URL>"
-      ;;
-    autoconf|autom4te|autoheader)
-      echo "The '$1' program is part of the GNU Autoconf package:"
-      echo "<$gnu_software_URL/autoconf/>"
-      echo "It also requires GNU m4 and Perl in order to run:"
-      echo "<$gnu_software_URL/m4/>"
-      echo "<$perl_URL>"
-      ;;
-  esac
-}
-
-give_advice ()
-{
-  # Normalize program name to check for.
-  normalized_program=`echo "$1" | sed '
   s/^gnu-//; t
   s/^gnu//; t
   s/^g//; t'`
 
-  printf '%s\n' "'$1' is $msg."
+# Now exit if we have it, but it failed.  Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).  This is about non-GNU programs, so use $1 not
+# $program.
+case $1 in
+  lex*|yacc*)
+    # Not GNU programs, they don't have --version.
+    ;;
 
-  configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
+  tar*)
-  case $normalized_program in
+    if test -n "$run"; then
-    autoconf*)
+       echo 1>&2 "ERROR: \`tar' requires --run"
-      echo "You should only need it if you modified 'configure.ac',"
+       exit 1
-      echo "or m4 files included by it."
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-      program_details 'autoconf'
+       exit 1
-      ;;
+    fi
-    autoheader*)
-      echo "You should only need it if you modified 'acconfig.h' or"
-      echo "$configure_deps."
-      program_details 'autoheader'
-      ;;
-    automake*)
-      echo "You should only need it if you modified 'Makefile.am' or"
-      echo "$configure_deps."
-      program_details 'automake'
-      ;;
-    aclocal*)
-      echo "You should only need it if you modified 'acinclude.m4' or"
-      echo "$configure_deps."
-      program_details 'aclocal'
-      ;;
-   autom4te*)
-      echo "You might have modified some maintainer files that require"
-      echo "the 'autom4te' program to be rebuilt."
-      program_details 'autom4te'
-      ;;
-    bison*|yacc*)
-      echo "You should only need it if you modified a '.y' file."
-      echo "You may want to install the GNU Bison package:"
-      echo "<$gnu_software_URL/bison/>"
-      ;;
-    lex*|flex*)
-      echo "You should only need it if you modified a '.l' file."
-      echo "You may want to install the Fast Lexical Analyzer package:"
-      echo "<$flex_URL>"
-      ;;
-    help2man*)
-      echo "You should only need it if you modified a dependency" \
-           "of a man page."
-      echo "You may want to install the GNU Help2man package:"
-      echo "<$gnu_software_URL/help2man/>"
-    ;;
-    makeinfo*)
-      echo "You should only need it if you modified a '.texi' file, or"
-      echo "any other file indirectly affecting the aspect of the manual."
-      echo "You might want to install the Texinfo package:"
-      echo "<$gnu_software_URL/texinfo/>"
-      echo "The spurious makeinfo call might also be the consequence of"
-      echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
-      echo "want to install GNU make:"
-      echo "<$gnu_software_URL/make/>"
     ;;
+
   *)
-      echo "You might have modified some files without having the proper"
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-      echo "tools for further handling them.  Check the 'README' file, it"
+       # We have it, but it failed.
-      echo "often tells you about the needed prerequisites for installing"
+       exit 1
-      echo "this package.  You may also peek at any GNU archive site, in"
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-      echo "case some other package contains this missing '$1' program."
+       # Could not run --version or --help.  This is probably someone
+       # running `$TOOL --version' or `$TOOL --help' to check whether
+       # $TOOL exists and not knowing $TOOL uses missing.
+       exit 1
+    fi
+    ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $program in
+  aclocal*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
+         to install the \`Automake' and \`Perl' packages.  Grab them from
+         any GNU archive site."
+    touch aclocal.m4
+    ;;
+
+  autoconf*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`${configure_ac}'.  You might want to install the
+         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
+         archive site."
+    touch configure
+    ;;
+
+  autoheader*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
+         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
+         from any GNU archive site."
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+    test -z "$files" && files="config.h"
+    touch_files=
+    for f in $files; do
+      case $f in
+      *:*) touch_files="$touch_files "`echo "$f" |
+				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+      *) touch_files="$touch_files $f.in";;
+      esac
+    done
+    touch $touch_files
+    ;;
+
+  automake*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+         You might want to install the \`Automake' and \`Perl' packages.
+         Grab them from any GNU archive site."
+    find . -type f -name Makefile.am -print |
+	   sed 's/\.am$/.in/' |
+	   while read f; do touch "$f"; done
+    ;;
+
+  autom4te*)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.
+         You can get \`$1' as part of \`Autoconf' from any GNU
+         archive site."
+
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo "#! /bin/sh"
+	echo "# Created by GNU Automake missing as a replacement of"
+	echo "#  $ $@"
+	echo "exit 0"
+	chmod +x $file
+	exit 1
+    fi
+    ;;
+
+  bison*|yacc*)
+    echo 1>&2 "\
+WARNING: \`$1' $msg.  You should only need it if
+         you modified a \`.y' file.  You may need the \`Bison' package
+         in order for those modifications to take effect.  You can get
+         \`Bison' from any GNU archive site."
+    rm -f y.tab.c y.tab.h
+    if test $# -ne 1; then
+        eval LASTARG="\${$#}"
+	case $LASTARG in
+	*.y)
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+	    if test -f "$SRCFILE"; then
+	         cp "$SRCFILE" y.tab.c
+	    fi
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+	    if test -f "$SRCFILE"; then
+	         cp "$SRCFILE" y.tab.h
+	    fi
 	  ;;
 	esac
-}
+    fi
+    if test ! -f y.tab.h; then
+	echo >y.tab.h
+    fi
+    if test ! -f y.tab.c; then
+	echo 'main() { return 0; }' >y.tab.c
+    fi
+    ;;
 
-give_advice "$1" | sed -e '1s/^/WARNING: /' \
+  lex*|flex*)
-                       -e '2,$s/^/         /' >&2
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified a \`.l' file.  You may need the \`Flex' package
+         in order for those modifications to take effect.  You can get
+         \`Flex' from any GNU archive site."
+    rm -f lex.yy.c
+    if test $# -ne 1; then
+        eval LASTARG="\${$#}"
+	case $LASTARG in
+	*.l)
+	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+	    if test -f "$SRCFILE"; then
+	         cp "$SRCFILE" lex.yy.c
+	    fi
+	  ;;
+	esac
+    fi
+    if test ! -f lex.yy.c; then
+	echo 'main() { return 0; }' >lex.yy.c
+    fi
+    ;;
 
-# Propagate the correct exit status (expected to be 127 for a program
+  help2man*)
-# not found, 63 for a program that failed due to version mismatch).
+    echo 1>&2 "\
-exit $st
+WARNING: \`$1' is $msg.  You should only need it if
+	 you modified a dependency of a manual page.  You may need the
+	 \`Help2man' package in order for those modifications to take
+	 effect.  You can get \`Help2man' from any GNU archive site."
+
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo ".ab help2man is required to generate this page"
+	exit $?
+    fi
+    ;;
+
+  makeinfo*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified a \`.texi' or \`.texinfo' file, or any other file
+         indirectly affecting the aspect of the manual.  The spurious
+         call might also be the consequence of using a buggy \`make' (AIX,
+         DU, IRIX).  You might want to install the \`Texinfo' package or
+         the \`GNU make' package.  Grab either from any GNU archive site."
+    # The file to touch is that specified with -o ...
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -z "$file"; then
+      # ... or it is the one specified with @setfilename ...
+      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '
+	/^@setfilename/{
+	  s/.* \([^ ]*\) *$/\1/
+	  p
+	  q
+	}' $infile`
+      # ... or it is derived from the source name (dir/f.texi becomes f.info)
+      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+    fi
+    # If the file does not exist, the user really needs makeinfo;
+    # let's fail without touching anything.
+    test -f $file || exit 1
+    touch $file
+    ;;
+
+  tar*)
+    shift
+
+    # We have already tried tar in the generic part.
+    # Look for gnutar/gtar before invocation to avoid ugly error
+    # messages.
+    if (gnutar --version > /dev/null 2>&1); then
+       gnutar "$@" && exit 0
+    fi
+    if (gtar --version > /dev/null 2>&1); then
+       gtar "$@" && exit 0
+    fi
+    firstarg="$1"
+    if shift; then
+	case $firstarg in
+	*o*)
+	    firstarg=`echo "$firstarg" | sed s/o//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+	case $firstarg in
+	*h*)
+	    firstarg=`echo "$firstarg" | sed s/h//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+    fi
+
+    echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+         You may want to install GNU tar or Free paxutils, or check the
+         command line arguments."
+    exit 1
+    ;;
+
+  *)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.  Check the \`README' file,
+         it often tells you about the needed prerequisites for installing
+         this package.  You may also peek at any GNU archive site, in case
+         some other package would contain this missing \`$1' program."
+    exit 1
+    ;;
+esac
+
+exit 0
 
 # Local variables:
-# eval: (add-hook 'before-save-hook 'time-stamp)
+# eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC0"
+# time-stamp-time-zone: "UTC"
 # time-stamp-end: "; # UTC"
 # End:

src/Makefile.am

@@ -1,89 +1,50 @@
 ## Produce this file with automake to get Makefile.in
 
-sbin_PROGRAMS = tincd
+sbin_PROGRAMS = tincd tincctl
+
+EXTRA_DIST = linux bsd solaris cygwin mingw raw_socket uml_socket openssl gcrypt
 
 tincd_SOURCES = \
-	have.h \
+	utils.c getopt.c getopt1.c list.c splay_tree.c dropin.c fake-getaddrinfo.c fake-getnameinfo.c \
-	system.h \
+	buffer.c conf.c connection.c control.c edge.c graph.c logger.c meta.c net.c net_packet.c net_setup.c \
-	avl_tree.c avl_tree.h \
+	net_socket.c netutl.c node.c process.c protocol.c protocol_auth.c protocol_edge.c protocol_misc.c \
-	conf.c conf.h \
+	protocol_key.c protocol_subnet.c route.c subnet.c tincd.c
-	connection.c connection.h \
-	device.h \
-	dropin.c dropin.h \
-	dummy_device.c \
-	edge.c edge.h \
-	ethernet.h \
-	event.c event.h \
-	fake-getaddrinfo.c fake-getaddrinfo.h \
-	fake-getnameinfo.c fake-getnameinfo.h \
-	graph.c graph.h \
-	ipv4.h \
-	ipv6.h \
-	list.c list.h \
-	logger.c logger.h \
-	meta.c meta.h \
-	multicast_device.c \
-	net.c net.h \
-	net_packet.c \
-	net_setup.c \
-	net_socket.c \
-	netutl.c netutl.h \
-	node.c node.h \
-	pidfile.c pidfile.h \
-	process.c process.h \
-	protocol.c protocol.h \
-	protocol_auth.c \
-	protocol_edge.c \
-	protocol_misc.c \
-	protocol_key.c \
-	protocol_subnet.c \
-	proxy.c proxy.h \
-	raw_socket_device.c \
-	route.c route.h \
-	subnet.c subnet.h \
-	tincd.c \
-	utils.c utils.h \
-	xalloc.h
 
-if !GETOPT
+nodist_tincd_SOURCES = \
-tincd_SOURCES += \
+	device.c cipher.c crypto.c ecdh.c ecdsa.c digest.c prf.c rsa.c
-	getopt.c getopt.h \
-	getopt1.c
-endif
 
-if LINUX
+tincctl_SOURCES = \
-tincd_SOURCES += linux/device.c
+	utils.c getopt.c getopt1.c dropin.c \
-endif
+	list.c tincctl.c top.c
+
+nodist_tincctl_SOURCES = \
+	ecdsagen.c rsagen.c
 
-if BSD
-tincd_SOURCES += bsd/device.c
 if TUNEMU
-tincd_SOURCES += bsd/tunemu.c bsd/tunemu.h
+tincd_SOURCES += bsd/tunemu.c
-endif
 endif
 
-if SOLARIS
+tincctl_LDADD = $(CURSES_LIBS)
-tincd_SOURCES += solaris/device.c
-endif
 
-if MINGW
+DEFAULT_INCLUDES =
-tincd_SOURCES += mingw/device.c mingw/common.h
-endif
 
-if CYGWIN
+INCLUDES = @INCLUDES@ -I$(top_builddir)
-tincd_SOURCES += cygwin/device.c
-endif
 
-if UML
+noinst_HEADERS = \
-tincd_SOURCES += uml_device.c
+	xalloc.h utils.h getopt.h list.h splay_tree.h dropin.h fake-getaddrinfo.h fake-getnameinfo.h fake-gai-errnos.h ipv6.h ipv4.h ethernet.h \
-endif
+	buffer.h conf.h connection.h control.h control_common.h device.h edge.h graph.h logger.h meta.h net.h netutl.h node.h process.h \
+	protocol.h route.h subnet.h tincctl.h top.h bsd/tunemu.h
 
-if VDE
+nodist_noinst_HEADERS = \
-tincd_SOURCES += vde_device.c
+	cipher.h crypto.h ecdh.h ecdsa.h digest.h prf.h rsa.h ecdsagen.h rsagen.h
-endif
+
+LIBS = @LIBS@ @LIBGCRYPT_LIBS@
 
 if TUNEMU
 LIBS += -lpcap
 endif
 
-AM_CPPFLAGS = -DCONFDIR=\"$(sysconfdir)\" -DRUNSTATEDIR=\"$(runstatedir)\" -DLOCALSTATEDIR=\"$(localstatedir)\" -I $(abs_top_builddir)/
+AM_CFLAGS = -DCONFDIR=\"$(sysconfdir)\" -DLOCALSTATEDIR=\"$(localstatedir)\" -DSBINDIR=\"$(sbindir)\"
+
+dist-hook:
+	rm -f `find . -type l`

src/Makefile.in

@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -14,62 +15,8 @@
 
 @SET_MAKE@
 
+
 VPATH = @srcdir@
-am__is_gnu_make = { \
-  if test -z '$(MAKELEVEL)'; then \
-    false; \
-  elif test -n '$(MAKE_HOST)'; then \
-    true; \
-  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
-    true; \
-  else \
-    false; \
-  fi; \
-}
-am__make_running_with_option = \
-  case $${target_option-} in \
-      ?) ;; \
-      *) echo "am__make_running_with_option: internal error: invalid" \
-              "target option '$${target_option-}' specified" >&2; \
-         exit 1;; \
-  esac; \
-  has_opt=no; \
-  sane_makeflags=$$MAKEFLAGS; \
-  if $(am__is_gnu_make); then \
-    sane_makeflags=$$MFLAGS; \
-  else \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        bs=\\; \
-        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-    esac; \
-  fi; \
-  skip_next=no; \
-  strip_trailopt () \
-  { \
-    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-  }; \
-  for flg in $$sane_makeflags; do \
-    test $$skip_next = yes && { skip_next=no; continue; }; \
-    case $$flg in \
-      *=*|--*) continue;; \
-        -*I) strip_trailopt 'I'; skip_next=yes;; \
-      -*I?*) strip_trailopt 'I';; \
-        -*O) strip_trailopt 'O'; skip_next=yes;; \
-      -*O?*) strip_trailopt 'O';; \
-        -*l) strip_trailopt 'l'; skip_next=yes;; \
-      -*l?*) strip_trailopt 'l';; \
-      -[dEDm]) skip_next=yes;; \
-      -[JT]) skip_next=yes;; \
-    esac; \
-    case $$flg in \
-      *$$target_option*) has_opt=yes; break;; \
-    esac; \
-  done; \
-  test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -88,163 +35,74 @@ PRE_UNINSTALL = :
 POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
-sbin_PROGRAMS = tincd$(EXEEXT)
+sbin_PROGRAMS = tincd$(EXEEXT) tincctl$(EXEEXT)
-@GETOPT_FALSE@am__append_1 = \
+@TUNEMU_TRUE@am__append_1 = bsd/tunemu.c
-@GETOPT_FALSE@	getopt.c getopt.h \
+@TUNEMU_TRUE@am__append_2 = -lpcap
-@GETOPT_FALSE@	getopt1.c
-
-@LINUX_TRUE@am__append_2 = linux/device.c
-@BSD_TRUE@am__append_3 = bsd/device.c
-@BSD_TRUE@@TUNEMU_TRUE@am__append_4 = bsd/tunemu.c bsd/tunemu.h
-@SOLARIS_TRUE@am__append_5 = solaris/device.c
-@MINGW_TRUE@am__append_6 = mingw/device.c mingw/common.h
-@CYGWIN_TRUE@am__append_7 = cygwin/device.c
-@UML_TRUE@am__append_8 = uml_device.c
-@VDE_TRUE@am__append_9 = vde_device.c
-@TUNEMU_TRUE@am__append_10 = -lpcap
 subdir = src
+DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \
+	$(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/attribute.m4 \
-	$(top_srcdir)/m4/ax_append_flag.m4 \
+	$(top_srcdir)/m4/curses.m4 $(top_srcdir)/m4/libevent.m4 \
-	$(top_srcdir)/m4/ax_cflags_warn_all.m4 \
+	$(top_srcdir)/m4/lzo.m4 $(top_srcdir)/m4/openssl.m4 \
-	$(top_srcdir)/m4/ax_check_compile_flag.m4 \
+	$(top_srcdir)/m4/zlib.m4 $(top_srcdir)/configure.in
-	$(top_srcdir)/m4/ax_check_link_flag.m4 \
-	$(top_srcdir)/m4/ax_require_defined.m4 $(top_srcdir)/m4/lzo.m4 \
-	$(top_srcdir)/m4/openssl.m4 $(top_srcdir)/m4/zlib.m4 \
-	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
 am__installdirs = "$(DESTDIR)$(sbindir)"
 PROGRAMS = $(sbin_PROGRAMS)
-am__tincd_SOURCES_DIST = have.h system.h avl_tree.c avl_tree.h conf.c \
+am_tincctl_OBJECTS = utils.$(OBJEXT) getopt.$(OBJEXT) \
-	conf.h connection.c connection.h device.h dropin.c dropin.h \
+	getopt1.$(OBJEXT) dropin.$(OBJEXT) list.$(OBJEXT) \
-	dummy_device.c edge.c edge.h ethernet.h event.c event.h \
+	tincctl.$(OBJEXT) top.$(OBJEXT)
-	fake-getaddrinfo.c fake-getaddrinfo.h fake-getnameinfo.c \
+nodist_tincctl_OBJECTS = ecdsagen.$(OBJEXT) rsagen.$(OBJEXT)
-	fake-getnameinfo.h graph.c graph.h ipv4.h ipv6.h list.c list.h \
+tincctl_OBJECTS = $(am_tincctl_OBJECTS) $(nodist_tincctl_OBJECTS)
-	logger.c logger.h meta.c meta.h multicast_device.c net.c net.h \
+am__DEPENDENCIES_1 =
-	net_packet.c net_setup.c net_socket.c netutl.c netutl.h node.c \
+tincctl_DEPENDENCIES = $(am__DEPENDENCIES_1)
-	node.h pidfile.c pidfile.h process.c process.h protocol.c \
+am__tincd_SOURCES_DIST = utils.c getopt.c getopt1.c list.c \
-	protocol.h protocol_auth.c protocol_edge.c protocol_misc.c \
+	splay_tree.c dropin.c fake-getaddrinfo.c fake-getnameinfo.c \
-	protocol_key.c protocol_subnet.c proxy.c proxy.h \
+	buffer.c conf.c connection.c control.c edge.c graph.c logger.c \
-	raw_socket_device.c route.c route.h subnet.c subnet.h tincd.c \
+	meta.c net.c net_packet.c net_setup.c net_socket.c netutl.c \
-	utils.c utils.h xalloc.h getopt.c getopt.h getopt1.c \
+	node.c process.c protocol.c protocol_auth.c protocol_edge.c \
-	linux/device.c bsd/device.c bsd/tunemu.c bsd/tunemu.h \
+	protocol_misc.c protocol_key.c protocol_subnet.c route.c \
-	solaris/device.c mingw/device.c mingw/common.h cygwin/device.c \
+	subnet.c tincd.c bsd/tunemu.c
-	uml_device.c vde_device.c
+@TUNEMU_TRUE@am__objects_1 = tunemu.$(OBJEXT)
-@GETOPT_FALSE@am__objects_1 = getopt.$(OBJEXT) getopt1.$(OBJEXT)
+am_tincd_OBJECTS = utils.$(OBJEXT) getopt.$(OBJEXT) getopt1.$(OBJEXT) \
-am__dirstamp = $(am__leading_dot)dirstamp
+	list.$(OBJEXT) splay_tree.$(OBJEXT) dropin.$(OBJEXT) \
-@LINUX_TRUE@am__objects_2 = linux/device.$(OBJEXT)
+	fake-getaddrinfo.$(OBJEXT) fake-getnameinfo.$(OBJEXT) \
-@BSD_TRUE@am__objects_3 = bsd/device.$(OBJEXT)
+	buffer.$(OBJEXT) conf.$(OBJEXT) connection.$(OBJEXT) \
-@BSD_TRUE@@TUNEMU_TRUE@am__objects_4 = bsd/tunemu.$(OBJEXT)
+	control.$(OBJEXT) edge.$(OBJEXT) graph.$(OBJEXT) \
-@SOLARIS_TRUE@am__objects_5 = solaris/device.$(OBJEXT)
+	logger.$(OBJEXT) meta.$(OBJEXT) net.$(OBJEXT) \
-@MINGW_TRUE@am__objects_6 = mingw/device.$(OBJEXT)
+	net_packet.$(OBJEXT) net_setup.$(OBJEXT) net_socket.$(OBJEXT) \
-@CYGWIN_TRUE@am__objects_7 = cygwin/device.$(OBJEXT)
+	netutl.$(OBJEXT) node.$(OBJEXT) process.$(OBJEXT) \
-@UML_TRUE@am__objects_8 = uml_device.$(OBJEXT)
+	protocol.$(OBJEXT) protocol_auth.$(OBJEXT) \
-@VDE_TRUE@am__objects_9 = vde_device.$(OBJEXT)
+	protocol_edge.$(OBJEXT) protocol_misc.$(OBJEXT) \
-am_tincd_OBJECTS = avl_tree.$(OBJEXT) conf.$(OBJEXT) \
+	protocol_key.$(OBJEXT) protocol_subnet.$(OBJEXT) \
-	connection.$(OBJEXT) dropin.$(OBJEXT) dummy_device.$(OBJEXT) \
+	route.$(OBJEXT) subnet.$(OBJEXT) tincd.$(OBJEXT) \
-	edge.$(OBJEXT) event.$(OBJEXT) fake-getaddrinfo.$(OBJEXT) \
+	$(am__objects_1)
-	fake-getnameinfo.$(OBJEXT) graph.$(OBJEXT) list.$(OBJEXT) \
+nodist_tincd_OBJECTS = device.$(OBJEXT) cipher.$(OBJEXT) \
-	logger.$(OBJEXT) meta.$(OBJEXT) multicast_device.$(OBJEXT) \
+	crypto.$(OBJEXT) ecdh.$(OBJEXT) ecdsa.$(OBJEXT) \
-	net.$(OBJEXT) net_packet.$(OBJEXT) net_setup.$(OBJEXT) \
+	digest.$(OBJEXT) prf.$(OBJEXT) rsa.$(OBJEXT)
-	net_socket.$(OBJEXT) netutl.$(OBJEXT) node.$(OBJEXT) \
+tincd_OBJECTS = $(am_tincd_OBJECTS) $(nodist_tincd_OBJECTS)
-	pidfile.$(OBJEXT) process.$(OBJEXT) protocol.$(OBJEXT) \
-	protocol_auth.$(OBJEXT) protocol_edge.$(OBJEXT) \
-	protocol_misc.$(OBJEXT) protocol_key.$(OBJEXT) \
-	protocol_subnet.$(OBJEXT) proxy.$(OBJEXT) \
-	raw_socket_device.$(OBJEXT) route.$(OBJEXT) subnet.$(OBJEXT) \
-	tincd.$(OBJEXT) utils.$(OBJEXT) $(am__objects_1) \
-	$(am__objects_2) $(am__objects_3) $(am__objects_4) \
-	$(am__objects_5) $(am__objects_6) $(am__objects_7) \
-	$(am__objects_8) $(am__objects_9)
-tincd_OBJECTS = $(am_tincd_OBJECTS)
 tincd_LDADD = $(LDADD)
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN     " $@;
-am__v_GEN_1 = 
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 = 
-DEFAULT_INCLUDES = 
 depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__maybe_remake_depfiles = depfiles
+am__depfiles_maybe = depfiles
-am__depfiles_remade = ./$(DEPDIR)/avl_tree.Po ./$(DEPDIR)/conf.Po \
-	./$(DEPDIR)/connection.Po ./$(DEPDIR)/dropin.Po \
-	./$(DEPDIR)/dummy_device.Po ./$(DEPDIR)/edge.Po \
-	./$(DEPDIR)/event.Po ./$(DEPDIR)/fake-getaddrinfo.Po \
-	./$(DEPDIR)/fake-getnameinfo.Po ./$(DEPDIR)/getopt.Po \
-	./$(DEPDIR)/getopt1.Po ./$(DEPDIR)/graph.Po \
-	./$(DEPDIR)/list.Po ./$(DEPDIR)/logger.Po ./$(DEPDIR)/meta.Po \
-	./$(DEPDIR)/multicast_device.Po ./$(DEPDIR)/net.Po \
-	./$(DEPDIR)/net_packet.Po ./$(DEPDIR)/net_setup.Po \
-	./$(DEPDIR)/net_socket.Po ./$(DEPDIR)/netutl.Po \
-	./$(DEPDIR)/node.Po ./$(DEPDIR)/pidfile.Po \
-	./$(DEPDIR)/process.Po ./$(DEPDIR)/protocol.Po \
-	./$(DEPDIR)/protocol_auth.Po ./$(DEPDIR)/protocol_edge.Po \
-	./$(DEPDIR)/protocol_key.Po ./$(DEPDIR)/protocol_misc.Po \
-	./$(DEPDIR)/protocol_subnet.Po ./$(DEPDIR)/proxy.Po \
-	./$(DEPDIR)/raw_socket_device.Po ./$(DEPDIR)/route.Po \
-	./$(DEPDIR)/subnet.Po ./$(DEPDIR)/tincd.Po \
-	./$(DEPDIR)/uml_device.Po ./$(DEPDIR)/utils.Po \
-	./$(DEPDIR)/vde_device.Po bsd/$(DEPDIR)/device.Po \
-	bsd/$(DEPDIR)/tunemu.Po cygwin/$(DEPDIR)/device.Po \
-	linux/$(DEPDIR)/device.Po mingw/$(DEPDIR)/device.Po \
-	solaris/$(DEPDIR)/device.Po
 am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-AM_V_CC = $(am__v_CC_@AM_V@)
-am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
-am__v_CC_0 = @echo "  CC      " $@;
-am__v_CC_1 = 
 CCLD = $(CC)
 LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+SOURCES = $(tincctl_SOURCES) $(nodist_tincctl_SOURCES) \
-am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+	$(tincd_SOURCES) $(nodist_tincd_SOURCES)
-am__v_CCLD_0 = @echo "  CCLD    " $@;
+DIST_SOURCES = $(tincctl_SOURCES) $(am__tincd_SOURCES_DIST)
-am__v_CCLD_1 = 
+HEADERS = $(nodist_noinst_HEADERS) $(noinst_HEADERS)
-SOURCES = $(tincd_SOURCES)
-DIST_SOURCES = $(am__tincd_SOURCES_DIST)
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates.  Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
-  BEGIN { nonempty = 0; } \
-  { items[$$0] = 1; nonempty = 1; } \
-  END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique.  This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
-  list='$(am__tagged_files)'; \
-  unique=`for i in $$list; do \
-    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-  done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
-am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
 AUTOMAKE = @AUTOMAKE@
@@ -254,6 +112,7 @@ CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
 CPP = @CPP@
 CPPFLAGS = @CPPFLAGS@
+CURSES_LIBS = @CURSES_LIBS@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
@@ -263,15 +122,21 @@ ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 GREP = @GREP@
+INCLUDES = @INCLUDES@ -I$(top_builddir)
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 LDFLAGS = @LDFLAGS@
+LIBGCRYPT_CFLAGS = @LIBGCRYPT_CFLAGS@
+LIBGCRYPT_CONFIG = @LIBGCRYPT_CONFIG@
+LIBGCRYPT_LIBS = @LIBGCRYPT_LIBS@
 LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@ $(am__append_10)
+LIBS = @LIBS@ @LIBGCRYPT_LIBS@ $(am__append_2)
+LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
 OBJEXT = @OBJEXT@
@@ -283,6 +148,7 @@ PACKAGE_TARNAME = @PACKAGE_TARNAME@
 PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 STRIP = @STRIP@
@@ -329,37 +195,48 @@ pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
 psdir = @psdir@
-runstatedir = @runstatedir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
 sysconfdir = @sysconfdir@
-systemd_path = @systemd_path@
 target_alias = @target_alias@
 top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
-tincd_SOURCES = have.h system.h avl_tree.c avl_tree.h conf.c conf.h \
+EXTRA_DIST = linux bsd solaris cygwin mingw raw_socket uml_socket openssl gcrypt
-	connection.c connection.h device.h dropin.c dropin.h \
+tincd_SOURCES = utils.c getopt.c getopt1.c list.c splay_tree.c \
-	dummy_device.c edge.c edge.h ethernet.h event.c event.h \
+	dropin.c fake-getaddrinfo.c fake-getnameinfo.c buffer.c conf.c \
-	fake-getaddrinfo.c fake-getaddrinfo.h fake-getnameinfo.c \
+	connection.c control.c edge.c graph.c logger.c meta.c net.c \
-	fake-getnameinfo.h graph.c graph.h ipv4.h ipv6.h list.c list.h \
+	net_packet.c net_setup.c net_socket.c netutl.c node.c \
-	logger.c logger.h meta.c meta.h multicast_device.c net.c net.h \
+	process.c protocol.c protocol_auth.c protocol_edge.c \
-	net_packet.c net_setup.c net_socket.c netutl.c netutl.h node.c \
+	protocol_misc.c protocol_key.c protocol_subnet.c route.c \
-	node.h pidfile.c pidfile.h process.c process.h protocol.c \
+	subnet.c tincd.c $(am__append_1)
-	protocol.h protocol_auth.c protocol_edge.c protocol_misc.c \
+nodist_tincd_SOURCES = \
-	protocol_key.c protocol_subnet.c proxy.c proxy.h \
+	device.c cipher.c crypto.c ecdh.c ecdsa.c digest.c prf.c rsa.c
-	raw_socket_device.c route.c route.h subnet.c subnet.h tincd.c \
+
-	utils.c utils.h xalloc.h $(am__append_1) $(am__append_2) \
+tincctl_SOURCES = \
-	$(am__append_3) $(am__append_4) $(am__append_5) \
+	utils.c getopt.c getopt1.c dropin.c \
-	$(am__append_6) $(am__append_7) $(am__append_8) \
+	list.c tincctl.c top.c
-	$(am__append_9)
+
-AM_CPPFLAGS = -DCONFDIR=\"$(sysconfdir)\" -DRUNSTATEDIR=\"$(runstatedir)\" -DLOCALSTATEDIR=\"$(localstatedir)\" -I $(abs_top_builddir)/
+nodist_tincctl_SOURCES = \
+	ecdsagen.c rsagen.c
+
+tincctl_LDADD = $(CURSES_LIBS)
+DEFAULT_INCLUDES = 
+noinst_HEADERS = \
+	xalloc.h utils.h getopt.h list.h splay_tree.h dropin.h fake-getaddrinfo.h fake-getnameinfo.h fake-gai-errnos.h ipv6.h ipv4.h ethernet.h \
+	buffer.h conf.h connection.h control.h control_common.h device.h edge.h graph.h logger.h meta.h net.h netutl.h node.h process.h \
+	protocol.h route.h subnet.h tincctl.h top.h bsd/tunemu.h
+
+nodist_noinst_HEADERS = \
+	cipher.h crypto.h ecdh.h ecdsa.h digest.h prf.h rsa.h ecdsagen.h rsagen.h
+
+AM_CFLAGS = -DCONFDIR=\"$(sysconfdir)\" -DLOCALSTATEDIR=\"$(localstatedir)\" -DSBINDIR=\"$(sbindir)\"
 all: all-am
 
 .SUFFIXES:
 .SUFFIXES: .c .o .obj
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
@@ -371,37 +248,34 @@ $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --gnu src/Makefile
+.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
 	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 	esac;
 
 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 
-$(top_srcdir)/configure:  $(am__configure_deps)
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(am__aclocal_m4_deps):
 install-sbinPROGRAMS: $(sbin_PROGRAMS)
 	@$(NORMAL_INSTALL)
+	test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)"
 	@list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
-	fi; \
 	for p in $$list; do echo "$$p $$p"; done | \
 	sed 's/$(EXEEXT)$$//' | \
-	while read p p1; do if test -f $$p \
+	while read p p1; do if test -f $$p; \
-	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	  then echo "$$p"; echo "$$p"; else :; fi; \
 	done | \
-	sed -e 'p;s,.*/,,;n;h' \
+	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
-	    -e 's|.*|.|' \
 	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
 	sed 'N;N;N;s,\n, ,g' | \
 	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
@@ -422,164 +296,120 @@ uninstall-sbinPROGRAMS:
 	@list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
 	files=`for p in $$list; do echo "$$p"; done | \
 	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-	      -e 's/$$/$(EXEEXT)/' \
+	      -e 's/$$/$(EXEEXT)/' `; \
-	`; \
 	test -n "$$list" || exit 0; \
 	echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
 	cd "$(DESTDIR)$(sbindir)" && rm -f $$files
 
 clean-sbinPROGRAMS:
 	-test -z "$(sbin_PROGRAMS)" || rm -f $(sbin_PROGRAMS)
-
+tincctl$(EXEEXT): $(tincctl_OBJECTS) $(tincctl_DEPENDENCIES) 
-installcheck-sbinPROGRAMS: $(sbin_PROGRAMS)
+	@rm -f tincctl$(EXEEXT)
-	bad=0; pid=$$$$; list="$(sbin_PROGRAMS)"; for p in $$list; do \
+	$(LINK) $(tincctl_OBJECTS) $(tincctl_LDADD) $(LIBS)
-	  case ' $(AM_INSTALLCHECK_STD_OPTIONS_EXEMPT) ' in \
+tincd$(EXEEXT): $(tincd_OBJECTS) $(tincd_DEPENDENCIES) 
-	   *" $$p "* | *" $(srcdir)/$$p "*) continue;; \
-	  esac; \
-	  f=`echo "$$p" | \
-	     sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
-	  for opt in --help --version; do \
-	    if "$(DESTDIR)$(sbindir)/$$f" $$opt >c$${pid}_.out \
-	         2>c$${pid}_.err </dev/null \
-		 && test -n "`cat c$${pid}_.out`" \
-		 && test -z "`cat c$${pid}_.err`"; then :; \
-	    else echo "$$f does not support $$opt" 1>&2; bad=1; fi; \
-	  done; \
-	done; rm -f c$${pid}_.???; exit $$bad
-linux/$(am__dirstamp):
-	@$(MKDIR_P) linux
-	@: > linux/$(am__dirstamp)
-linux/$(DEPDIR)/$(am__dirstamp):
-	@$(MKDIR_P) linux/$(DEPDIR)
-	@: > linux/$(DEPDIR)/$(am__dirstamp)
-linux/device.$(OBJEXT): linux/$(am__dirstamp) \
-	linux/$(DEPDIR)/$(am__dirstamp)
-bsd/$(am__dirstamp):
-	@$(MKDIR_P) bsd
-	@: > bsd/$(am__dirstamp)
-bsd/$(DEPDIR)/$(am__dirstamp):
-	@$(MKDIR_P) bsd/$(DEPDIR)
-	@: > bsd/$(DEPDIR)/$(am__dirstamp)
-bsd/device.$(OBJEXT): bsd/$(am__dirstamp) \
-	bsd/$(DEPDIR)/$(am__dirstamp)
-bsd/tunemu.$(OBJEXT): bsd/$(am__dirstamp) \
-	bsd/$(DEPDIR)/$(am__dirstamp)
-solaris/$(am__dirstamp):
-	@$(MKDIR_P) solaris
-	@: > solaris/$(am__dirstamp)
-solaris/$(DEPDIR)/$(am__dirstamp):
-	@$(MKDIR_P) solaris/$(DEPDIR)
-	@: > solaris/$(DEPDIR)/$(am__dirstamp)
-solaris/device.$(OBJEXT): solaris/$(am__dirstamp) \
-	solaris/$(DEPDIR)/$(am__dirstamp)
-mingw/$(am__dirstamp):
-	@$(MKDIR_P) mingw
-	@: > mingw/$(am__dirstamp)
-mingw/$(DEPDIR)/$(am__dirstamp):
-	@$(MKDIR_P) mingw/$(DEPDIR)
-	@: > mingw/$(DEPDIR)/$(am__dirstamp)
-mingw/device.$(OBJEXT): mingw/$(am__dirstamp) \
-	mingw/$(DEPDIR)/$(am__dirstamp)
-cygwin/$(am__dirstamp):
-	@$(MKDIR_P) cygwin
-	@: > cygwin/$(am__dirstamp)
-cygwin/$(DEPDIR)/$(am__dirstamp):
-	@$(MKDIR_P) cygwin/$(DEPDIR)
-	@: > cygwin/$(DEPDIR)/$(am__dirstamp)
-cygwin/device.$(OBJEXT): cygwin/$(am__dirstamp) \
-	cygwin/$(DEPDIR)/$(am__dirstamp)
-
-tincd$(EXEEXT): $(tincd_OBJECTS) $(tincd_DEPENDENCIES) $(EXTRA_tincd_DEPENDENCIES) 
 	@rm -f tincd$(EXEEXT)
-	$(AM_V_CCLD)$(LINK) $(tincd_OBJECTS) $(tincd_LDADD) $(LIBS)
+	$(LINK) $(tincd_OBJECTS) $(tincd_LDADD) $(LIBS)
 
 mostlyclean-compile:
 	-rm -f *.$(OBJEXT)
-	-rm -f bsd/*.$(OBJEXT)
-	-rm -f cygwin/*.$(OBJEXT)
-	-rm -f linux/*.$(OBJEXT)
-	-rm -f mingw/*.$(OBJEXT)
-	-rm -f solaris/*.$(OBJEXT)
 
 distclean-compile:
 	-rm -f *.tab.c
 
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/avl_tree.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/buffer.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/conf.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cipher.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/connection.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/conf.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dropin.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/connection.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dummy_device.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/control.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/edge.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/crypto.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/event.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/device.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fake-getaddrinfo.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/digest.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fake-getnameinfo.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dropin.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getopt.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ecdh.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getopt1.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ecdsa.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/graph.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ecdsagen.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/list.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/edge.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/logger.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fake-getaddrinfo.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/meta.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fake-getnameinfo.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/multicast_device.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getopt.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/net.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getopt1.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/net_packet.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/graph.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/net_setup.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/list.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/net_socket.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/logger.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/netutl.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/meta.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/node.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/net.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pidfile.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/net_packet.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/process.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/net_setup.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/protocol.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/net_socket.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/protocol_auth.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/netutl.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/protocol_edge.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/node.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/protocol_key.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/prf.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/protocol_misc.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/process.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/protocol_subnet.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/protocol.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/proxy.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/protocol_auth.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/raw_socket_device.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/protocol_edge.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/route.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/protocol_key.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/subnet.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/protocol_misc.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tincd.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/protocol_subnet.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/uml_device.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/route.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utils.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rsa.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vde_device.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rsagen.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@bsd/$(DEPDIR)/device.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/splay_tree.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@bsd/$(DEPDIR)/tunemu.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/subnet.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@cygwin/$(DEPDIR)/device.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tincctl.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@linux/$(DEPDIR)/device.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tincd.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@mingw/$(DEPDIR)/device.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/top.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@solaris/$(DEPDIR)/device.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tunemu.Po@am__quote@
-
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utils.Po@am__quote@
-$(am__depfiles_remade):
-	@$(MKDIR_P) $(@D)
-	@echo '# dummy' >$@-t && $(am__mv) $@-t $@
-
-am--depfiles: $(am__depfiles_remade)
 
 .c.o:
-@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+@am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
-@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
-ID: $(am__tagged_files)
+tunemu.o: bsd/tunemu.c
-	$(am__define_uniq_tagged_files); mkid -fID $$unique
+@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT tunemu.o -MD -MP -MF $(DEPDIR)/tunemu.Tpo -c -o tunemu.o `test -f 'bsd/tunemu.c' || echo '$(srcdir)/'`bsd/tunemu.c
-tags: tags-am
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/tunemu.Tpo $(DEPDIR)/tunemu.Po
-TAGS: tags
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='bsd/tunemu.c' object='tunemu.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o tunemu.o `test -f 'bsd/tunemu.c' || echo '$(srcdir)/'`bsd/tunemu.c
 
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+tunemu.obj: bsd/tunemu.c
+@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT tunemu.obj -MD -MP -MF $(DEPDIR)/tunemu.Tpo -c -o tunemu.obj `if test -f 'bsd/tunemu.c'; then $(CYGPATH_W) 'bsd/tunemu.c'; else $(CYGPATH_W) '$(srcdir)/bsd/tunemu.c'; fi`
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/tunemu.Tpo $(DEPDIR)/tunemu.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='bsd/tunemu.c' object='tunemu.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o tunemu.obj `if test -f 'bsd/tunemu.c'; then $(CYGPATH_W) 'bsd/tunemu.c'; else $(CYGPATH_W) '$(srcdir)/bsd/tunemu.c'; fi`
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
 	set x; \
 	here=`pwd`; \
-	$(am__define_uniq_tagged_files); \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	shift; \
 	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
@@ -591,11 +421,15 @@ tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 	      $$unique; \
 	  fi; \
 	fi
-ctags: ctags-am
+ctags: CTAGS
-
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-CTAGS: ctags
+		$(TAGS_FILES) $(LISP)
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	$(am__define_uniq_tagged_files); \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 	     $$unique
@@ -604,29 +438,11 @@ GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
 	  && $(am__cd) $(top_srcdir) \
 	  && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-am
-
-cscopelist-am: $(am__tagged_files)
-	list='$(am__tagged_files)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
-distdir: $(BUILT_SOURCES)
+distdir: $(DISTFILES)
-	$(MAKE) $(AM_MAKEFLAGS) distdir-am
-
-distdir-am: $(DISTFILES)
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	list='$(DISTFILES)'; \
@@ -656,9 +472,12 @@ distdir-am: $(DISTFILES)
 	    || exit 1; \
 	  fi; \
 	done
+	$(MAKE) $(AM_MAKEFLAGS) \
+	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
+	  dist-hook
 check-am: all-am
 check: check-am
-all-am: Makefile $(PROGRAMS)
+all-am: Makefile $(PROGRAMS) $(HEADERS)
 installdirs:
 	for dir in "$(DESTDIR)$(sbindir)"; do \
 	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
@@ -673,15 +492,10 @@ install-am: all-am
 
 installcheck: installcheck-am
 install-strip:
-	if test -z '$(STRIP)'; then \
 	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
+	  `test -z '$(STRIP)' || \
-	else \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
 mostlyclean-generic:
 
 clean-generic:
@@ -689,16 +503,6 @@ clean-generic:
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-	-rm -f bsd/$(DEPDIR)/$(am__dirstamp)
-	-rm -f bsd/$(am__dirstamp)
-	-rm -f cygwin/$(DEPDIR)/$(am__dirstamp)
-	-rm -f cygwin/$(am__dirstamp)
-	-rm -f linux/$(DEPDIR)/$(am__dirstamp)
-	-rm -f linux/$(am__dirstamp)
-	-rm -f mingw/$(DEPDIR)/$(am__dirstamp)
-	-rm -f mingw/$(am__dirstamp)
-	-rm -f solaris/$(DEPDIR)/$(am__dirstamp)
-	-rm -f solaris/$(am__dirstamp)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -708,50 +512,7 @@ clean: clean-am
 clean-am: clean-generic clean-sbinPROGRAMS mostlyclean-am
 
 distclean: distclean-am
-		-rm -f ./$(DEPDIR)/avl_tree.Po
+	-rm -rf ./$(DEPDIR)
-	-rm -f ./$(DEPDIR)/conf.Po
-	-rm -f ./$(DEPDIR)/connection.Po
-	-rm -f ./$(DEPDIR)/dropin.Po
-	-rm -f ./$(DEPDIR)/dummy_device.Po
-	-rm -f ./$(DEPDIR)/edge.Po
-	-rm -f ./$(DEPDIR)/event.Po
-	-rm -f ./$(DEPDIR)/fake-getaddrinfo.Po
-	-rm -f ./$(DEPDIR)/fake-getnameinfo.Po
-	-rm -f ./$(DEPDIR)/getopt.Po
-	-rm -f ./$(DEPDIR)/getopt1.Po
-	-rm -f ./$(DEPDIR)/graph.Po
-	-rm -f ./$(DEPDIR)/list.Po
-	-rm -f ./$(DEPDIR)/logger.Po
-	-rm -f ./$(DEPDIR)/meta.Po
-	-rm -f ./$(DEPDIR)/multicast_device.Po
-	-rm -f ./$(DEPDIR)/net.Po
-	-rm -f ./$(DEPDIR)/net_packet.Po
-	-rm -f ./$(DEPDIR)/net_setup.Po
-	-rm -f ./$(DEPDIR)/net_socket.Po
-	-rm -f ./$(DEPDIR)/netutl.Po
-	-rm -f ./$(DEPDIR)/node.Po
-	-rm -f ./$(DEPDIR)/pidfile.Po
-	-rm -f ./$(DEPDIR)/process.Po
-	-rm -f ./$(DEPDIR)/protocol.Po
-	-rm -f ./$(DEPDIR)/protocol_auth.Po
-	-rm -f ./$(DEPDIR)/protocol_edge.Po
-	-rm -f ./$(DEPDIR)/protocol_key.Po
-	-rm -f ./$(DEPDIR)/protocol_misc.Po
-	-rm -f ./$(DEPDIR)/protocol_subnet.Po
-	-rm -f ./$(DEPDIR)/proxy.Po
-	-rm -f ./$(DEPDIR)/raw_socket_device.Po
-	-rm -f ./$(DEPDIR)/route.Po
-	-rm -f ./$(DEPDIR)/subnet.Po
-	-rm -f ./$(DEPDIR)/tincd.Po
-	-rm -f ./$(DEPDIR)/uml_device.Po
-	-rm -f ./$(DEPDIR)/utils.Po
-	-rm -f ./$(DEPDIR)/vde_device.Po
-	-rm -f bsd/$(DEPDIR)/device.Po
-	-rm -f bsd/$(DEPDIR)/tunemu.Po
-	-rm -f cygwin/$(DEPDIR)/device.Po
-	-rm -f linux/$(DEPDIR)/device.Po
-	-rm -f mingw/$(DEPDIR)/device.Po
-	-rm -f solaris/$(DEPDIR)/device.Po
 	-rm -f Makefile
 distclean-am: clean-am distclean-compile distclean-generic \
 	distclean-tags
@@ -794,53 +555,10 @@ install-ps: install-ps-am
 
 install-ps-am:
 
-installcheck-am: installcheck-sbinPROGRAMS
+installcheck-am:
 
 maintainer-clean: maintainer-clean-am
-		-rm -f ./$(DEPDIR)/avl_tree.Po
+	-rm -rf ./$(DEPDIR)
-	-rm -f ./$(DEPDIR)/conf.Po
-	-rm -f ./$(DEPDIR)/connection.Po
-	-rm -f ./$(DEPDIR)/dropin.Po
-	-rm -f ./$(DEPDIR)/dummy_device.Po
-	-rm -f ./$(DEPDIR)/edge.Po
-	-rm -f ./$(DEPDIR)/event.Po
-	-rm -f ./$(DEPDIR)/fake-getaddrinfo.Po
-	-rm -f ./$(DEPDIR)/fake-getnameinfo.Po
-	-rm -f ./$(DEPDIR)/getopt.Po
-	-rm -f ./$(DEPDIR)/getopt1.Po
-	-rm -f ./$(DEPDIR)/graph.Po
-	-rm -f ./$(DEPDIR)/list.Po
-	-rm -f ./$(DEPDIR)/logger.Po
-	-rm -f ./$(DEPDIR)/meta.Po
-	-rm -f ./$(DEPDIR)/multicast_device.Po
-	-rm -f ./$(DEPDIR)/net.Po
-	-rm -f ./$(DEPDIR)/net_packet.Po
-	-rm -f ./$(DEPDIR)/net_setup.Po
-	-rm -f ./$(DEPDIR)/net_socket.Po
-	-rm -f ./$(DEPDIR)/netutl.Po
-	-rm -f ./$(DEPDIR)/node.Po
-	-rm -f ./$(DEPDIR)/pidfile.Po
-	-rm -f ./$(DEPDIR)/process.Po
-	-rm -f ./$(DEPDIR)/protocol.Po
-	-rm -f ./$(DEPDIR)/protocol_auth.Po
-	-rm -f ./$(DEPDIR)/protocol_edge.Po
-	-rm -f ./$(DEPDIR)/protocol_key.Po
-	-rm -f ./$(DEPDIR)/protocol_misc.Po
-	-rm -f ./$(DEPDIR)/protocol_subnet.Po
-	-rm -f ./$(DEPDIR)/proxy.Po
-	-rm -f ./$(DEPDIR)/raw_socket_device.Po
-	-rm -f ./$(DEPDIR)/route.Po
-	-rm -f ./$(DEPDIR)/subnet.Po
-	-rm -f ./$(DEPDIR)/tincd.Po
-	-rm -f ./$(DEPDIR)/uml_device.Po
-	-rm -f ./$(DEPDIR)/utils.Po
-	-rm -f ./$(DEPDIR)/vde_device.Po
-	-rm -f bsd/$(DEPDIR)/device.Po
-	-rm -f bsd/$(DEPDIR)/tunemu.Po
-	-rm -f cygwin/$(DEPDIR)/device.Po
-	-rm -f linux/$(DEPDIR)/device.Po
-	-rm -f mingw/$(DEPDIR)/device.Po
-	-rm -f solaris/$(DEPDIR)/device.Po
 	-rm -f Makefile
 maintainer-clean-am: distclean-am maintainer-clean-generic
 
@@ -860,22 +578,22 @@ uninstall-am: uninstall-sbinPROGRAMS
 
 .MAKE: install-am install-strip
 
-.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am clean \
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
-	clean-generic clean-sbinPROGRAMS cscopelist-am ctags ctags-am \
+	clean-sbinPROGRAMS ctags dist-hook distclean distclean-compile \
-	distclean distclean-compile distclean-generic distclean-tags \
+	distclean-generic distclean-tags distdir dvi dvi-am html \
-	distdir dvi dvi-am html html-am info info-am install \
+	html-am info info-am install install-am install-data \
-	install-am install-data install-data-am install-dvi \
+	install-data-am install-dvi install-dvi-am install-exec \
-	install-dvi-am install-exec install-exec-am install-html \
+	install-exec-am install-html install-html-am install-info \
-	install-html-am install-info install-info-am install-man \
+	install-info-am install-man install-pdf install-pdf-am \
-	install-pdf install-pdf-am install-ps install-ps-am \
+	install-ps install-ps-am install-sbinPROGRAMS install-strip \
-	install-sbinPROGRAMS install-strip installcheck \
+	installcheck installcheck-am installdirs maintainer-clean \
-	installcheck-am installcheck-sbinPROGRAMS installdirs \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
-	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
-	mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
+	uninstall-am uninstall-sbinPROGRAMS
-	tags tags-am uninstall uninstall-am uninstall-sbinPROGRAMS
 
-.PRECIOUS: Makefile
 
+dist-hook:
+	rm -f `find . -type l`
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.

src/avl_tree.c

@@ -1,757 +0,0 @@
-/*
-    avl_tree.c -- avl_ tree and linked list convenience
-    Copyright (C) 1998 Michael H. Buselli
-                  2000-2005 Ivo Timmermans,
-                  2000-2015 Guus Sliepen <guus@tinc-vpn.org>
-                  2000-2005 Wessel Dankers <wsl@tinc-vpn.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License along
-    with this program; if not, write to the Free Software Foundation, Inc.,
-    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-    Original AVL tree library by Michael H. Buselli <cosine@cosine.org>.
-
-    Modified 2000-11-28 by Wessel Dankers <wsl@tinc-vpn.org> to use counts
-    instead of depths, to add the ->next and ->prev and to generally obfuscate
-    the code. Mail me if you found a bug.
-
-    Cleaned up and incorporated some of the ideas from the red-black tree
-    library for inclusion into tinc (https://www.tinc-vpn.org/) by
-    Guus Sliepen <guus@tinc-vpn.org>.
-*/
-
-#include "system.h"
-
-#include "avl_tree.h"
-#include "xalloc.h"
-
-#ifdef AVL_COUNT
-#define AVL_NODE_COUNT(n)  ((n) ? (n)->count : 0)
-#define AVL_L_COUNT(n)     (AVL_NODE_COUNT((n)->left))
-#define AVL_R_COUNT(n)     (AVL_NODE_COUNT((n)->right))
-#define AVL_CALC_COUNT(n)  (AVL_L_COUNT(n) + AVL_R_COUNT(n) + 1)
-#endif
-
-#ifdef AVL_DEPTH
-#define AVL_NODE_DEPTH(n)  ((n) ? (n)->depth : 0)
-#define L_AVL_DEPTH(n)     (AVL_NODE_DEPTH((n)->left))
-#define R_AVL_DEPTH(n)     (AVL_NODE_DEPTH((n)->right))
-#define AVL_CALC_DEPTH(n)  ((L_AVL_DEPTH(n)>R_AVL_DEPTH(n)?L_AVL_DEPTH(n):R_AVL_DEPTH(n)) + 1)
-#endif
-
-#ifndef AVL_DEPTH
-static int lg(unsigned int u) __attribute__((__const__));
-
-static int lg(unsigned int u) {
-	int r = 1;
-
-	if(!u) {
-		return 0;
-	}
-
-	if(u & 0xffff0000) {
-		u >>= 16;
-		r += 16;
-	}
-
-	if(u & 0x0000ff00) {
-		u >>= 8;
-		r += 8;
-	}
-
-	if(u & 0x000000f0) {
-		u >>= 4;
-		r += 4;
-	}
-
-	if(u & 0x0000000c) {
-		u >>= 2;
-		r += 2;
-	}
-
-	if(u & 0x00000002) {
-		r++;
-	}
-
-	return r;
-}
-#endif
-
-/* Internal helper functions */
-
-static int avl_check_balance(const avl_node_t *node) {
-#ifdef AVL_DEPTH
-	int d;
-
-	d = R_AVL_DEPTH(node) - L_AVL_DEPTH(node);
-
-	return d < -1 ? -1 : d > 1 ? 1 : 0;
-#else
-	/*      int d;
-	 *      d = lg(AVL_R_COUNT(node)) - lg(AVL_L_COUNT(node));
-	 *      d = d<-1?-1:d>1?1:0;
-	 */
-	int pl, r;
-
-	pl = lg(AVL_L_COUNT(node));
-	r = AVL_R_COUNT(node);
-
-	if(r >> pl + 1) {
-		return 1;
-	}
-
-	if(pl < 2 || r >> pl - 2) {
-		return 0;
-	}
-
-	return -1;
-#endif
-}
-
-static void avl_rebalance(avl_tree_t *tree, avl_node_t *node) {
-	avl_node_t *child;
-	avl_node_t *gchild;
-	avl_node_t *parent;
-	avl_node_t **superparent;
-
-	while(node) {
-		parent = node->parent;
-
-		superparent =
-		        parent ? node ==
-		        parent->left ? &parent->left : &parent->right : &tree->root;
-
-		switch(avl_check_balance(node)) {
-		case -1:
-			child = node->left;
-#ifdef AVL_DEPTH
-
-			if(L_AVL_DEPTH(child) >= R_AVL_DEPTH(child)) {
-#else
-
-			if(AVL_L_COUNT(child) >= AVL_R_COUNT(child)) {
-#endif
-				node->left = child->right;
-
-				if(node->left) {
-					node->left->parent = node;
-				}
-
-				child->right = node;
-				node->parent = child;
-				*superparent = child;
-				child->parent = parent;
-#ifdef AVL_COUNT
-				node->count = AVL_CALC_COUNT(node);
-				child->count = AVL_CALC_COUNT(child);
-#endif
-#ifdef AVL_DEPTH
-				node->depth = AVL_CALC_DEPTH(node);
-				child->depth = AVL_CALC_DEPTH(child);
-#endif
-			} else {
-				gchild = child->right;
-				node->left = gchild->right;
-
-				if(node->left) {
-					node->left->parent = node;
-				}
-
-				child->right = gchild->left;
-
-				if(child->right) {
-					child->right->parent = child;
-				}
-
-				gchild->right = node;
-
-				gchild->right->parent = gchild;
-				gchild->left = child;
-
-				gchild->left->parent = gchild;
-
-				*superparent = gchild;
-				gchild->parent = parent;
-#ifdef AVL_COUNT
-				node->count = AVL_CALC_COUNT(node);
-				child->count = AVL_CALC_COUNT(child);
-				gchild->count = AVL_CALC_COUNT(gchild);
-#endif
-#ifdef AVL_DEPTH
-				node->depth = AVL_CALC_DEPTH(node);
-				child->depth = AVL_CALC_DEPTH(child);
-				gchild->depth = AVL_CALC_DEPTH(gchild);
-#endif
-			}
-
-			break;
-
-		case 1:
-			child = node->right;
-#ifdef AVL_DEPTH
-
-			if(R_AVL_DEPTH(child) >= L_AVL_DEPTH(child)) {
-#else
-
-			if(AVL_R_COUNT(child) >= AVL_L_COUNT(child)) {
-#endif
-				node->right = child->left;
-
-				if(node->right) {
-					node->right->parent = node;
-				}
-
-				child->left = node;
-				node->parent = child;
-				*superparent = child;
-				child->parent = parent;
-#ifdef AVL_COUNT
-				node->count = AVL_CALC_COUNT(node);
-				child->count = AVL_CALC_COUNT(child);
-#endif
-#ifdef AVL_DEPTH
-				node->depth = AVL_CALC_DEPTH(node);
-				child->depth = AVL_CALC_DEPTH(child);
-#endif
-			} else {
-				gchild = child->left;
-				node->right = gchild->left;
-
-				if(node->right) {
-					node->right->parent = node;
-				}
-
-				child->left = gchild->right;
-
-				if(child->left) {
-					child->left->parent = child;
-				}
-
-				gchild->left = node;
-
-				gchild->left->parent = gchild;
-				gchild->right = child;
-
-				gchild->right->parent = gchild;
-
-				*superparent = gchild;
-				gchild->parent = parent;
-#ifdef AVL_COUNT
-				node->count = AVL_CALC_COUNT(node);
-				child->count = AVL_CALC_COUNT(child);
-				gchild->count = AVL_CALC_COUNT(gchild);
-#endif
-#ifdef AVL_DEPTH
-				node->depth = AVL_CALC_DEPTH(node);
-				child->depth = AVL_CALC_DEPTH(child);
-				gchild->depth = AVL_CALC_DEPTH(gchild);
-#endif
-			}
-
-			break;
-
-		default:
-#ifdef AVL_COUNT
-			node->count = AVL_CALC_COUNT(node);
-#endif
-#ifdef AVL_DEPTH
-			node->depth = AVL_CALC_DEPTH(node);
-#endif
-		}
-
-		node = parent;
-	}
-}
-
-/* (De)constructors */
-
-avl_tree_t *avl_alloc_tree(avl_compare_t compare, avl_action_t delete) {
-	avl_tree_t *tree;
-
-	tree = xmalloc_and_zero(sizeof(avl_tree_t));
-	tree->compare = compare;
-	tree->delete = delete;
-
-	return tree;
-}
-
-void avl_free_tree(avl_tree_t *tree) {
-	free(tree);
-}
-
-avl_node_t *avl_alloc_node(void) {
-	return xmalloc_and_zero(sizeof(avl_node_t));
-}
-
-void avl_free_node(avl_tree_t *tree, avl_node_t *node) {
-	if(node->data && tree->delete) {
-		tree->delete(node->data);
-	}
-
-	free(node);
-}
-
-/* Searching */
-
-void *avl_search(const avl_tree_t *tree, const void *data) {
-	avl_node_t *node;
-
-	node = avl_search_node(tree, data);
-
-	return node ? node->data : NULL;
-}
-
-void *avl_search_closest(const avl_tree_t *tree, const void *data, int *result) {
-	avl_node_t *node;
-
-	node = avl_search_closest_node(tree, data, result);
-
-	return node ? node->data : NULL;
-}
-
-void *avl_search_closest_smaller(const avl_tree_t *tree, const void *data) {
-	avl_node_t *node;
-
-	node = avl_search_closest_smaller_node(tree, data);
-
-	return node ? node->data : NULL;
-}
-
-void *avl_search_closest_greater(const avl_tree_t *tree, const void *data) {
-	avl_node_t *node;
-
-	node = avl_search_closest_greater_node(tree, data);
-
-	return node ? node->data : NULL;
-}
-
-avl_node_t *avl_search_node(const avl_tree_t *tree, const void *data) {
-	avl_node_t *node;
-	int result;
-
-	node = avl_search_closest_node(tree, data, &result);
-
-	return result ? NULL : node;
-}
-
-avl_node_t *avl_search_closest_node(const avl_tree_t *tree, const void *data,
-                                    int *result) {
-	avl_node_t *node;
-	int c;
-
-	node = tree->root;
-
-	if(!node) {
-		if(result) {
-			*result = 0;
-		}
-
-		return NULL;
-	}
-
-	for(;;) {
-		c = tree->compare(data, node->data);
-
-		if(c < 0) {
-			if(node->left) {
-				node = node->left;
-			} else {
-				if(result) {
-					*result = -1;
-				}
-
-				break;
-			}
-		} else if(c > 0) {
-			if(node->right) {
-				node = node->right;
-			} else {
-				if(result) {
-					*result = 1;
-				}
-
-				break;
-			}
-		} else {
-			if(result) {
-				*result = 0;
-			}
-
-			break;
-		}
-	}
-
-	return node;
-}
-
-avl_node_t *avl_search_closest_smaller_node(const avl_tree_t *tree,
-                const void *data) {
-	avl_node_t *node;
-	int result;
-
-	node = avl_search_closest_node(tree, data, &result);
-
-	if(result < 0) {
-		node = node->prev;
-	}
-
-	return node;
-}
-
-avl_node_t *avl_search_closest_greater_node(const avl_tree_t *tree,
-                const void *data) {
-	avl_node_t *node;
-	int result;
-
-	node = avl_search_closest_node(tree, data, &result);
-
-	if(result > 0) {
-		node = node->next;
-	}
-
-	return node;
-}
-
-/* Insertion and deletion */
-
-avl_node_t *avl_insert(avl_tree_t *tree, void *data) {
-	avl_node_t *closest, *new;
-	int result;
-
-	if(!tree->root) {
-		new = avl_alloc_node();
-		new->data = data;
-		avl_insert_top(tree, new);
-	} else {
-		closest = avl_search_closest_node(tree, data, &result);
-
-		switch(result) {
-		case -1:
-			new = avl_alloc_node();
-			new->data = data;
-			avl_insert_before(tree, closest, new);
-			break;
-
-		case 1:
-			new = avl_alloc_node();
-			new->data = data;
-			avl_insert_after(tree, closest, new);
-			break;
-
-		default:
-			return NULL;
-		}
-	}
-
-#ifdef AVL_COUNT
-	new->count = 1;
-#endif
-#ifdef AVL_DEPTH
-	new->depth = 1;
-#endif
-
-	return new;
-}
-
-avl_node_t *avl_insert_node(avl_tree_t *tree, avl_node_t *node) {
-	avl_node_t *closest;
-	int result;
-
-	if(!tree->root) {
-		avl_insert_top(tree, node);
-	} else {
-		closest = avl_search_closest_node(tree, node->data, &result);
-
-		switch(result) {
-		case -1:
-			avl_insert_before(tree, closest, node);
-			break;
-
-		case 1:
-			avl_insert_after(tree, closest, node);
-			break;
-
-		case 0:
-			return NULL;
-		}
-	}
-
-#ifdef AVL_COUNT
-	node->count = 1;
-#endif
-#ifdef AVL_DEPTH
-	node->depth = 1;
-#endif
-
-	return node;
-}
-
-void avl_insert_top(avl_tree_t *tree, avl_node_t *node) {
-	node->prev = node->next = node->parent = NULL;
-	tree->head = tree->tail = tree->root = node;
-}
-
-void avl_insert_before(avl_tree_t *tree, avl_node_t *before,
-                       avl_node_t *node) {
-	if(!before) {
-		if(tree->tail) {
-			avl_insert_after(tree, tree->tail, node);
-		} else {
-			avl_insert_top(tree, node);
-		}
-
-		return;
-	}
-
-	node->next = before;
-	node->parent = before;
-	node->prev = before->prev;
-
-	if(before->left) {
-		avl_insert_after(tree, before->prev, node);
-		return;
-	}
-
-	if(before->prev) {
-		before->prev->next = node;
-	} else {
-		tree->head = node;
-	}
-
-	before->prev = node;
-	before->left = node;
-
-	avl_rebalance(tree, before);
-}
-
-void avl_insert_after(avl_tree_t *tree, avl_node_t *after, avl_node_t *node) {
-	if(!after) {
-		if(tree->head) {
-			avl_insert_before(tree, tree->head, node);
-		} else {
-			avl_insert_top(tree, node);
-		}
-
-		return;
-	}
-
-	if(after->right) {
-		avl_insert_before(tree, after->next, node);
-		return;
-	}
-
-	node->prev = after;
-	node->parent = after;
-	node->next = after->next;
-
-	if(after->next) {
-		after->next->prev = node;
-	} else {
-		tree->tail = node;
-	}
-
-	after->next = node;
-	after->right = node;
-
-	avl_rebalance(tree, after);
-}
-
-avl_node_t *avl_unlink(avl_tree_t *tree, void *data) {
-	avl_node_t *node;
-
-	node = avl_search_node(tree, data);
-
-	if(node) {
-		avl_unlink_node(tree, node);
-	}
-
-	return node;
-}
-
-void avl_unlink_node(avl_tree_t *tree, avl_node_t *node) {
-	avl_node_t *parent;
-	avl_node_t **superparent;
-	avl_node_t *subst, *left, *right;
-	avl_node_t *balnode;
-
-	if(node->prev) {
-		node->prev->next = node->next;
-	} else {
-		tree->head = node->next;
-	}
-
-	if(node->next) {
-		node->next->prev = node->prev;
-	} else {
-		tree->tail = node->prev;
-	}
-
-	parent = node->parent;
-
-	superparent =
-	        parent ? node ==
-	        parent->left ? &parent->left : &parent->right : &tree->root;
-
-	left = node->left;
-	right = node->right;
-
-	if(!left) {
-		*superparent = right;
-
-		if(right) {
-			right->parent = parent;
-		}
-
-		balnode = parent;
-	} else if(!right) {
-		*superparent = left;
-		left->parent = parent;
-		balnode = parent;
-	} else {
-		subst = node->prev;
-
-		if(!subst) { // This only happens if node is not actually in a tree at all.
-			abort();
-		}
-
-		if(subst == left) {
-			balnode = subst;
-		} else {
-			balnode = subst->parent;
-			balnode->right = subst->left;
-
-			if(balnode->right) {
-				balnode->right->parent = balnode;
-			}
-
-			subst->left = left;
-			left->parent = subst;
-		}
-
-		subst->right = right;
-		subst->parent = parent;
-		right->parent = subst;
-		*superparent = subst;
-	}
-
-	avl_rebalance(tree, balnode);
-
-	node->next = node->prev = node->parent = node->left = node->right = NULL;
-
-#ifdef AVL_COUNT
-	node->count = 0;
-#endif
-#ifdef AVL_DEPTH
-	node->depth = 0;
-#endif
-}
-
-void avl_delete_node(avl_tree_t *tree, avl_node_t *node) {
-	avl_unlink_node(tree, node);
-	avl_free_node(tree, node);
-}
-
-void avl_delete(avl_tree_t *tree, void *data) {
-	avl_node_t *node;
-
-	node = avl_search_node(tree, data);
-
-	if(node) {
-		avl_delete_node(tree, node);
-	}
-}
-
-/* Fast tree cleanup */
-
-void avl_delete_tree(avl_tree_t *tree) {
-	avl_node_t *node, *next;
-
-	for(node = tree->head; node; node = next) {
-		next = node->next;
-		avl_free_node(tree, node);
-	}
-
-	avl_free_tree(tree);
-}
-
-/* Tree walking */
-
-void avl_foreach(const avl_tree_t *tree, avl_action_t action) {
-	avl_node_t *node, *next;
-
-	for(node = tree->head; node; node = next) {
-		next = node->next;
-		action(node->data);
-	}
-}
-
-void avl_foreach_node(const avl_tree_t *tree, avl_action_t action) {
-	avl_node_t *node, *next;
-
-	for(node = tree->head; node; node = next) {
-		next = node->next;
-		action(node);
-	}
-}
-
-/* Indexing */
-
-#ifdef AVL_COUNT
-unsigned int avl_count(const avl_tree_t *tree) {
-	return AVL_NODE_COUNT(tree->root);
-}
-
-avl_node_t *avl_get_node(const avl_tree_t *tree, unsigned int index) {
-	avl_node_t *node;
-	unsigned int c;
-
-	node = tree->root;
-
-	while(node) {
-		c = AVL_L_COUNT(node);
-
-		if(index < c) {
-			node = node->left;
-		} else if(index > c) {
-			node = node->right;
-			index -= c + 1;
-		} else {
-			return node;
-		}
-	}
-
-	return NULL;
-}
-
-unsigned int avl_index(const avl_node_t *node) {
-	avl_node_t *next;
-	unsigned int index;
-
-	index = AVL_L_COUNT(node);
-
-	while((next = node->parent)) {
-		if(node == next->right) {
-			index += AVL_L_COUNT(next) + 1;
-		}
-
-		node = next;
-	}
-
-	return index;
-}
-#endif
-#ifdef AVL_DEPTH
-unsigned int avl_depth(const avl_tree_t *tree) {
-	return AVL_NODE_DEPTH(tree->root);
-}
-#endif

src/avl_tree.h

@@ -1,142 +0,0 @@
-#ifndef TINC_AVL_TREE_H
-#define TINC_AVL_TREE_H
-
-/*
-    avl_tree.h -- header file for avl_tree.c
-    Copyright (C) 1998 Michael H. Buselli
-                  2000-2005 Ivo Timmermans,
-                  2000-2006 Guus Sliepen <guus@tinc-vpn.org>
-                  2000-2005 Wessel Dankers <wsl@tinc-vpn.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License along
-    with this program; if not, write to the Free Software Foundation, Inc.,
-    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-    Original AVL tree library by Michael H. Buselli <cosine@cosine.org>.
-
-    Modified 2000-11-28 by Wessel Dankers <wsl@tinc-vpn.org> to use counts
-    instead of depths, to add the ->next and ->prev and to generally obfuscate
-    the code. Mail me if you found a bug.
-
-    Cleaned up and incorporated some of the ideas from the red-black tree
-    library for inclusion into tinc (https://www.tinc-vpn.org/) by
-    Guus Sliepen <guus@tinc-vpn.org>.
-*/
-
-#ifndef AVL_DEPTH
-#ifndef AVL_COUNT
-#define AVL_DEPTH
-#endif
-#endif
-
-typedef struct avl_node_t {
-
-	/* Linked list part */
-
-	struct avl_node_t *next;
-	struct avl_node_t *prev;
-
-	/* Tree part */
-
-	struct avl_node_t *parent;
-	struct avl_node_t *left;
-	struct avl_node_t *right;
-
-#ifdef AVL_COUNT
-	unsigned int count;
-#endif
-#ifdef AVL_DEPTH
-	unsigned char depth;
-#endif
-
-	/* Payload */
-
-	void *data;
-
-} avl_node_t;
-
-typedef int (*avl_compare_t)(const void *data1, const void *data2);
-typedef void (*avl_action_t)(const void *data);
-typedef void (*avl_action_node_t)(const avl_node_t *node);
-
-typedef struct avl_tree_t {
-
-	/* Linked list part */
-
-	avl_node_t *head;
-	avl_node_t *tail;
-
-	/* Tree part */
-
-	avl_node_t *root;
-
-	avl_compare_t compare;
-	avl_action_t delete;
-
-} avl_tree_t;
-
-/* (De)constructors */
-
-extern avl_tree_t *avl_alloc_tree(avl_compare_t compare, avl_action_t delete);
-extern void avl_free_tree(avl_tree_t *tree);
-
-extern avl_node_t *avl_alloc_node(void);
-extern void avl_free_node(avl_tree_t *tree, avl_node_t *node);
-
-/* Insertion and deletion */
-
-extern avl_node_t *avl_insert(avl_tree_t *tree, void *data);
-extern avl_node_t *avl_insert_node(avl_tree_t *tree, avl_node_t *node);
-
-extern void avl_insert_top(avl_tree_t *tree, avl_node_t *node);
-extern void avl_insert_before(avl_tree_t *tree, avl_node_t *before, avl_node_t *node);
-extern void avl_insert_after(avl_tree_t *tree, avl_node_t *after, avl_node_t *node);
-
-extern avl_node_t *avl_unlink(avl_tree_t *tree, void *data);
-extern void avl_unlink_node(avl_tree_t *tree, avl_node_t *node);
-extern void avl_delete(avl_tree_t *tree, void *data);
-extern void avl_delete_node(avl_tree_t *tree, avl_node_t *node);
-
-/* Fast tree cleanup */
-
-extern void avl_delete_tree(avl_tree_t *tree);
-
-/* Searching */
-
-extern void *avl_search(const avl_tree_t *tree, const void *data);
-extern void *avl_search_closest(const avl_tree_t *tree, const void *data, int *result);
-extern void *avl_search_closest_smaller(const avl_tree_t *tree, const void *data);
-extern void *avl_search_closest_greater(const avl_tree_t *tree, const void *data);
-
-extern avl_node_t *avl_search_node(const avl_tree_t *tree, const void *data);
-extern avl_node_t *avl_search_closest_node(const avl_tree_t *tree, const void *data, int *result);
-extern avl_node_t *avl_search_closest_smaller_node(const avl_tree_t *tree, const void *data);
-extern avl_node_t *avl_search_closest_greater_node(const avl_tree_t *tree, const void *data);
-
-/* Tree walking */
-
-extern void avl_foreach(const avl_tree_t *tree, avl_action_t action);
-extern void avl_foreach_node(const avl_tree_t *tree, avl_action_t action);
-
-/* Indexing */
-
-#ifdef AVL_COUNT
-extern unsigned int avl_count(const avl_tree_t *tree);
-extern avl_node_t *avl_get_node(const avl_tree_t *tree, unsigned int index);
-extern unsigned int avl_index(const avl_node_t *node);
-#endif
-#ifdef AVL_DEPTH
-extern unsigned int avl_depth(const avl_tree_t *tree);
-#endif
-
-#endif

src/bsd/device.c

@@ -1,7 +1,7 @@
 /*
     device.c -- Interaction BSD tun/tap device
     Copyright (C) 2001-2005 Ivo Timmermans,
-                  2001-2016 Guus Sliepen <guus@tinc-vpn.org>
+                  2001-2011 Guus Sliepen <guus@tinc-vpn.org>
                   2009      Grzegorz Dymarek <gregd72002@googlemail.com>
 
     This program is free software; you can redistribute it and/or modify
@@ -19,46 +19,38 @@
     51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 */
 
-#include "../system.h"
+#include "system.h"
 
-#include "../conf.h"
+#include "conf.h"
-#include "../device.h"
+#include "device.h"
-#include "../logger.h"
+#include "logger.h"
-#include "../net.h"
+#include "net.h"
-#include "../route.h"
+#include "route.h"
-#include "../utils.h"
+#include "utils.h"
-#include "../xalloc.h"
+#include "xalloc.h"
 
-#ifdef ENABLE_TUNEMU
+#ifdef HAVE_TUNEMU
-#include "tunemu.h"
+#include "bsd/tunemu.h"
 #endif
 
-#ifdef HAVE_NET_IF_UTUN_H
+#define DEFAULT_DEVICE "/dev/tun0"
-#include <sys/sys_domain.h>
-#include <sys/kern_control.h>
-#include <net/if_utun.h>
-#endif
-
-#define DEFAULT_TUN_DEVICE "/dev/tun0"
-#define DEFAULT_TAP_DEVICE "/dev/tap0"
 
 typedef enum device_type {
 	DEVICE_TYPE_TUN,
 	DEVICE_TYPE_TUNIFHEAD,
 	DEVICE_TYPE_TAP,
-#ifdef ENABLE_TUNEMU
+#ifdef HAVE_TUNEMU
 	DEVICE_TYPE_TUNEMU,
 #endif
-	DEVICE_TYPE_UTUN,
 } device_type_t;
 
 int device_fd = -1;
 char *device = NULL;
 char *iface = NULL;
-static const char *device_info = "OS X utun device";
+static char *device_info = NULL;
 static uint64_t device_total_in = 0;
 static uint64_t device_total_out = 0;
-#if defined(ENABLE_TUNEMU)
+#if defined(TUNEMU)
 static device_type_t device_type = DEVICE_TYPE_TUNEMU;
 #elif defined(HAVE_OPENBSD) || defined(HAVE_FREEBSD) || defined(HAVE_DRAGONFLY)
 static device_type_t device_type = DEVICE_TYPE_TUNIFHEAD;
@@ -66,138 +58,45 @@ static device_type_t device_type = DEVICE_TYPE_TUNIFHEAD;
 static device_type_t device_type = DEVICE_TYPE_TUN;
 #endif
 
-#ifdef HAVE_NET_IF_UTUN_H
+bool setup_device(void) {
-static bool setup_utun(void) {
-	device_fd = socket(PF_SYSTEM, SOCK_DGRAM, SYSPROTO_CONTROL);
-
-	if(device_fd == -1) {
-		logger(LOG_ERR, "Could not open PF_SYSTEM socket: %s\n", strerror(errno));
-		return false;
-	}
-
-	struct ctl_info info = {};
-
-	strlcpy(info.ctl_name, UTUN_CONTROL_NAME, sizeof(info.ctl_name));
-
-	if(ioctl(device_fd, CTLIOCGINFO, &info) == -1) {
-		logger(LOG_ERR, "ioctl(CTLIOCGINFO) failed: %s", strerror(errno));
-		return false;
-	}
-
-	int unit = -1;
-	char *p = strstr(device, "utun"), *e = NULL;
-
-	if(p) {
-		unit = strtol(p + 4, &e, 10);
-
-		if(!e) {
-			unit = -1;
-		}
-	}
-
-	struct sockaddr_ctl sc = {
-		.sc_id = info.ctl_id,
-		.sc_len = sizeof(sc),
-		.sc_family = AF_SYSTEM,
-		.ss_sysaddr = AF_SYS_CONTROL,
-		.sc_unit = unit + 1,
-	};
-
-	if(connect(device_fd, (struct sockaddr *)&sc, sizeof(sc)) == -1) {
-		logger(LOG_ERR, "Could not connect utun socket: %s\n", strerror(errno));
-		return false;
-	}
-
-	char name[64] = "";
-	socklen_t len = sizeof(name);
-
-	if(getsockopt(device_fd, SYSPROTO_CONTROL, UTUN_OPT_IFNAME, name, &len)) {
-		iface = xstrdup(device);
-	} else {
-		iface = xstrdup(name);
-	}
-
-	logger(LOG_INFO, "%s is a %s", device, device_info);
-
-	return true;
-}
-#endif
-
-static bool setup_device(void) {
-	// Find out which device file to open
-
-	if(!get_config_string(lookup_config(config_tree, "Device"), &device)) {
-		if(routing_mode == RMODE_ROUTER) {
-			device = xstrdup(DEFAULT_TUN_DEVICE);
-		} else {
-			device = xstrdup(DEFAULT_TAP_DEVICE);
-		}
-	}
-
-	// Find out if it's supposed to be a tun or a tap device
-
 	char *type;
 
+	if(!get_config_string(lookup_config(config_tree, "Device"), &device))
+		device = xstrdup(DEFAULT_DEVICE);
+
+	if(!get_config_string(lookup_config(config_tree, "Interface"), &iface))
+		iface = xstrdup(strrchr(device, '/') ? strrchr(device, '/') + 1 : device);
+
 	if(get_config_string(lookup_config(config_tree, "DeviceType"), &type)) {
 		if(!strcasecmp(type, "tun"))
 			/* use default */;	
-
+#ifdef HAVE_TUNEMU
-#ifdef ENABLE_TUNEMU
+		else if(!strcasecmp(type, "tunemu"))
-		else if(!strcasecmp(type, "tunemu")) {
 			device_type = DEVICE_TYPE_TUNEMU;
-		}
-
 #endif
-#ifdef HAVE_NET_IF_UTUN_H
+		else if(!strcasecmp(type, "tunnohead"))
-		else if(!strcasecmp(type, "utun")) {
-			device_type = DEVICE_TYPE_UTUN;
-		}
-
-#endif
-		else if(!strcasecmp(type, "tunnohead")) {
 			device_type = DEVICE_TYPE_TUN;
-		} else if(!strcasecmp(type, "tunifhead")) {
+		else if(!strcasecmp(type, "tunifhead"))
 			device_type = DEVICE_TYPE_TUNIFHEAD;
-		} else if(!strcasecmp(type, "tap")) {
+		else if(!strcasecmp(type, "tap"))
 			device_type = DEVICE_TYPE_TAP;
-		} else {
+		else {
 			logger(LOG_ERR, "Unknown device type %s!", type);
 			return false;
 		}
 	} else {
-#ifdef HAVE_NET_IF_UTUN_H
+		if(strstr(device, "tap") || routing_mode != RMODE_ROUTER)
-
-		if(strncmp(device, "utun", 4) == 0 || strncmp(device, "/dev/utun", 9) == 0) {
-			device_type = DEVICE_TYPE_UTUN;
-		} else
-#endif
-			if(strstr(device, "tap") || routing_mode != RMODE_ROUTER) {
 			device_type = DEVICE_TYPE_TAP;
 	}
-	}
-
-	if(routing_mode == RMODE_SWITCH && device_type != DEVICE_TYPE_TAP) {
-		logger(LOG_ERR, "Only tap devices support switch mode!");
-		return false;
-	}
-
-	// Open the device
 
 	switch(device_type) {
-#ifdef ENABLE_TUNEMU
+#ifdef HAVE_TUNEMU
-
 		case DEVICE_TYPE_TUNEMU: {
 			char dynamic_name[256] = "";
         		device_fd = tunemu_open(dynamic_name);
 		}
 			break;
 #endif
-#ifdef HAVE_NET_IF_UTUN_H
-
-	case DEVICE_TYPE_UTUN:
-		return setup_utun();
-#endif
-
 		default:
 			device_fd = open(device, O_RDWR | O_NONBLOCK);
 	}
@@ -207,136 +106,82 @@ static bool setup_device(void) {
 		return false;
 	}
 
-#ifdef FD_CLOEXEC
-	fcntl(device_fd, F_SETFD, FD_CLOEXEC);
-#endif
-
-	// Guess what the corresponding interface is called
-
-	char *realname = NULL;
-
-#if defined(HAVE_FDEVNAME)
-	realname = fdevname(device_fd);
-#elif defined(HAVE_DEVNAME)
-	struct stat buf;
-
-	if(!fstat(device_fd, &buf)) {
-		realname = devname(buf.st_rdev, S_IFCHR);
-	}
-
-#endif
-
-	if(!realname) {
-		realname = device;
-	}
-
-	if(!get_config_string(lookup_config(config_tree, "Interface"), &iface)) {
-		iface = xstrdup(strrchr(realname, '/') ? strrchr(realname, '/') + 1 : realname);
-	} else if(strcmp(iface, strrchr(realname, '/') ? strrchr(realname, '/') + 1 : realname)) {
-		logger(LOG_WARNING, "Warning: Interface does not match Device. $INTERFACE might be set incorrectly.");
-	}
-
-	// Configure the device as best as we can
-
 	switch(device_type) {
 		default:
 			device_type = DEVICE_TYPE_TUN;
-
 		case DEVICE_TYPE_TUN:
 #ifdef TUNSIFHEAD
 		{	
 			const int zero = 0;
-
+			if(ioctl(device_fd, TUNSIFHEAD, &zero, sizeof zero) == -1) {
-			if(ioctl(device_fd, TUNSIFHEAD, &zero, sizeof(zero)) == -1) {
 				logger(LOG_ERR, "System call `%s' failed: %s", "ioctl", strerror(errno));
 				return false;
 			}
 		}
-
 #endif
 #if defined(TUNSIFMODE) && defined(IFF_BROADCAST) && defined(IFF_MULTICAST)
 		{
 			const int mode = IFF_BROADCAST | IFF_MULTICAST;
-			ioctl(device_fd, TUNSIFMODE, &mode, sizeof(mode));
+			ioctl(device_fd, TUNSIFMODE, &mode, sizeof mode);
 		}
 #endif
 
 			device_info = "Generic BSD tun device";
 			break;
-
 		case DEVICE_TYPE_TUNIFHEAD:
 #ifdef TUNSIFHEAD
 		{
 			const int one = 1;
-
+			if(ioctl(device_fd, TUNSIFHEAD, &one, sizeof one) == -1) {
-			if(ioctl(device_fd, TUNSIFHEAD, &one, sizeof(one)) == -1) {
 				logger(LOG_ERR, "System call `%s' failed: %s", "ioctl", strerror(errno));
 				return false;
 			}
 		}
-
 #endif
 #if defined(TUNSIFMODE) && defined(IFF_BROADCAST) && defined(IFF_MULTICAST)
 		{
 				const int mode = IFF_BROADCAST | IFF_MULTICAST;
-			ioctl(device_fd, TUNSIFMODE, &mode, sizeof(mode));
+				ioctl(device_fd, TUNSIFMODE, &mode, sizeof mode);
 		}
 #endif
 
 			device_info = "Generic BSD tun device";
 			break;
-
 		case DEVICE_TYPE_TAP:
-		if(routing_mode == RMODE_ROUTER) {
+			if(routing_mode == RMODE_ROUTER)
 				overwrite_mac = true;
-		}
-
 			device_info = "Generic BSD tap device";
 #ifdef TAPGIFNAME
 			{
 				struct ifreq ifr;
-
+				if(ioctl(device_fd, TAPGIFNAME, (void*)&ifr) == 0) {
-			if(ioctl(device_fd, TAPGIFNAME, (void *)&ifr) == 0) {
+					if(iface)
-				if(iface) {
 						free(iface);
-				}
-
 					iface = xstrdup(ifr.ifr_name);
 				}
 			}
 			
 #endif
 			break;
-#ifdef ENABLE_TUNEMU
+#ifdef HAVE_TUNEMU
-
 		case DEVICE_TYPE_TUNEMU:
         		device_info = "BSD tunemu device";
 			break;
 #endif
 	}
 
-#ifdef SIOCGIFADDR
-
-	if(overwrite_mac) {
-		ioctl(device_fd, SIOCGIFADDR, mymac.x);
-	}
-
-#endif
-
 	logger(LOG_INFO, "%s is a %s", device, device_info);
 
 	return true;
 }
 
-static void close_device(void) {
+void close_device(void) {
 	switch(device_type) {
-#ifdef ENABLE_TUNEMU
+#ifdef HAVE_TUNEMU
-
 		case DEVICE_TYPE_TUNEMU:
 			tunemu_close(device_fd);
 			break;
 #endif
-
 		default:
 			close(device_fd);
 	}
@@ -345,20 +190,20 @@ static void close_device(void) {
 	free(iface);
 }
 
-static bool read_packet(vpn_packet_t *packet) {
+bool read_packet(vpn_packet_t *packet) {
-	int lenin;
+	int inlen;
 
 	switch(device_type) {
 		case DEVICE_TYPE_TUN:
-#ifdef ENABLE_TUNEMU
+#ifdef HAVE_TUNEMU
 		case DEVICE_TYPE_TUNEMU:
-		if(device_type == DEVICE_TYPE_TUNEMU) {
+			if(device_type == DEVICE_TYPE_TUNEMU)
-			lenin = tunemu_read(device_fd, packet->data + 14, MTU - 14);
+				inlen = tunemu_read(device_fd, packet->data + 14, MTU - 14);
-		} else
+			else
 #endif
-			lenin = read(device_fd, packet->data + 14, MTU - 14);
+				inlen = read(device_fd, packet->data + 14, MTU - 14);
 
-		if(lenin <= 0) {
+			if(inlen <= 0) {
 				logger(LOG_ERR, "Error while reading from %s %s: %s", device_info,
 					   device, strerror(errno));
 				return false;
@@ -369,12 +214,10 @@ static bool read_packet(vpn_packet_t *packet) {
 					packet->data[12] = 0x08;
 					packet->data[13] = 0x00;
 					break;
-
 				case 6:
 					packet->data[12] = 0x86;
 					packet->data[13] = 0xDD;
 					break;
-
 				default:
 					ifdebug(TRAFFIC) logger(LOG_ERR,
 							   "Unknown IP version %d while reading packet from %s %s",
@@ -382,49 +225,49 @@ static bool read_packet(vpn_packet_t *packet) {
 					return false;
 			}
 
-		memset(packet->data, 0, 12);
+			packet->len = inlen + 14;
-		packet->len = lenin + 14;
 			break;
 
-	case DEVICE_TYPE_UTUN:
 		case DEVICE_TYPE_TUNIFHEAD: {
-		if((lenin = read(device_fd, packet->data + 10, MTU - 10)) <= 0) {
+			u_int32_t type;
+			struct iovec vector[2] = {{&type, sizeof type}, {packet->data + 14, MTU - 14}};
+
+			if((inlen = readv(device_fd, vector, 2)) <= 0) {
 				logger(LOG_ERR, "Error while reading from %s %s: %s", device_info,
 					   device, strerror(errno));
 				return false;
 			}
 
-		switch(packet->data[14] >> 4) {
+			switch (ntohl(type)) {
-		case 4:
+				case AF_INET:
 					packet->data[12] = 0x08;
 					packet->data[13] = 0x00;
 					break;
 
-		case 6:
+				case AF_INET6:
 					packet->data[12] = 0x86;
 					packet->data[13] = 0xDD;
 					break;
 
 				default:
 					ifdebug(TRAFFIC) logger(LOG_ERR,
-			                        "Unknown IP version %d while reading packet from %s %s",
+							   "Unknown address family %x while reading packet from %s %s",
-			                        packet->data[14] >> 4, device_info, device);
+							   ntohl(type), device_info, device);
 					return false;
 			}
 
-		memset(packet->data, 0, 12);
+			packet->len = inlen + 10;
-		packet->len = lenin + 10;
 			break;
 		}
 
 		case DEVICE_TYPE_TAP:
-		if((lenin = read(device_fd, packet->data, MTU)) <= 0) {
+			if((inlen = read(device_fd, packet->data, MTU)) <= 0) {
 				logger(LOG_ERR, "Error while reading from %s %s: %s", device_info,
 					   device, strerror(errno));
 				return false;
 			}
 
-		packet->len = lenin;
+			packet->len = inlen;
 			break;
 
 		default:
@@ -439,7 +282,7 @@ static bool read_packet(vpn_packet_t *packet) {
 	return true;
 }
 
-static bool write_packet(vpn_packet_t *packet) {
+bool write_packet(vpn_packet_t *packet) {
 	ifdebug(TRAFFIC) logger(LOG_DEBUG, "Writing packet of %d bytes to %s",
 			   packet->len, device_info);
 
@@ -450,23 +293,22 @@ static bool write_packet(vpn_packet_t *packet) {
 					   device, strerror(errno));
 				return false;
 			}
-
 			break;
 
-	case DEVICE_TYPE_UTUN:
 		case DEVICE_TYPE_TUNIFHEAD: {
-		int af = (packet->data[12] << 8) + packet->data[13];
+			u_int32_t type;
-		uint32_t type;
+			struct iovec vector[2] = {{&type, sizeof type}, {packet->data + 14, packet->len - 14}};
+			int af;
 			
-		switch(af) {
+			af = (packet->data[12] << 8) + packet->data[13];
+
+			switch (af) {
 				case 0x0800:
 					type = htonl(AF_INET);
 					break;
-
 				case 0x86DD:
 					type = htonl(AF_INET6);
 					break;
-
 				default:
 					ifdebug(TRAFFIC) logger(LOG_ERR,
 							   "Unknown address family %x while writing packet to %s %s",
@@ -474,14 +316,11 @@ static bool write_packet(vpn_packet_t *packet) {
 					return false;
 			}
 
-		memcpy(packet->data + 10, &type, sizeof(type));
+			if(writev(device_fd, vector, 2) < 0) {
-
-		if(write(device_fd, packet->data + 10, packet->len - 10) < 0) {
 				logger(LOG_ERR, "Can't write to %s %s: %s", device_info, device,
 					   strerror(errno));
 				return false;
 			}
-
 			break;
 		}
 			
@@ -491,18 +330,15 @@ static bool write_packet(vpn_packet_t *packet) {
 					   device, strerror(errno));
 				return false;
 			}
-
 			break;
 
-#ifdef ENABLE_TUNEMU
+#ifdef HAVE_TUNEMU
-
 		case DEVICE_TYPE_TUNEMU:
 			if(tunemu_write(device_fd, packet->data + 14, packet->len - 14) < 0) {
 				logger(LOG_ERR, "Error while writing to %s %s: %s", device_info,
 					   device, strerror(errno));
 				return false;
 			}
-
 			break;
 #endif
 
@@ -515,16 +351,8 @@ static bool write_packet(vpn_packet_t *packet) {
 	return true;
 }
 
-static void dump_device_stats(void) {
+void dump_device_stats(void) {
 	logger(LOG_DEBUG, "Statistics for %s %s:", device_info, device);
 	logger(LOG_DEBUG, " total bytes in:  %10"PRIu64, device_total_in);
 	logger(LOG_DEBUG, " total bytes out: %10"PRIu64, device_total_out);
 }
-
-const devops_t os_devops = {
-	.setup = setup_device,
-	.close = close_device,
-	.read = read_packet,
-	.write = write_packet,
-	.dump_stats = dump_device_stats,
-};

src/bsd/tunemu.c

@@ -49,21 +49,24 @@
 #define PPPIOCCONNECT	_IOW('t', 58, int)
 #define	PPPIOCGUNIT		_IOR('t', 86, int)
 
-struct sockaddr_ppp {
+struct sockaddr_ppp
+{
 	u_int8_t ppp_len;
 	u_int8_t ppp_family;
 	u_int16_t ppp_proto;
 	u_int32_t ppp_cookie;
 };
 
-enum NPmode {
+enum NPmode
+{
 	NPMODE_PASS,
     NPMODE_DROP,
     NPMODE_ERROR,
     NPMODE_QUEUE
 };
 
-struct npioctl {
+struct npioctl
+{
 	int protocol;
 	enum NPmode mode;
 };
@@ -80,55 +83,58 @@ static pcap_t *pcap = NULL;
 static int data_buffer_length = 0;
 static char *data_buffer = NULL;
 
-static void tun_error(char *format, ...) {
+static void tun_error(char *format, ...)
+{
 	va_list vl;
 	va_start(vl, format);
 	vsnprintf(tunemu_error, ERROR_BUFFER_SIZE, format, vl);
 	va_end(vl);
 }
 
-static void tun_noerror() {
+static void tun_noerror()
+{
 	*tunemu_error = 0;
 }
 
-static void closeall() {
+static void closeall()
+{
     int fd = getdtablesize();
-
+	while (fd--)
-	while(fd--) {
 		close(fd);
-	}
 
     open("/dev/null", O_RDWR, 0);
     dup(0);
     dup(0);
 }
 
-static int ppp_load_kext() {
+static int ppp_load_kext()
+{
 	int pid = fork();
-
+	if (pid < 0)
-	if(pid < 0) {
+	{
 		tun_error("fork for ppp kext: %s", strerror(errno));
 		return -1;
 	}
 
-	if(pid == 0) {
+	if (pid == 0)
+	{
 		closeall();
 		execle("/sbin/kextload", "kextload", PPP_KEXT_PATH, NULL, NULL);
 		exit(1);
 	}
 
 	int status;
-
+	while (waitpid(pid, &status, 0) < 0)
-	while(waitpid(pid, &status, 0) < 0) {
+	{
-		if(errno == EINTR) {
+		if (errno == EINTR)
 			continue;
-		}
 
 		tun_error("waitpid for ppp kext: %s", strerror(errno));
 		return -1;
 	}
 
-	if(WEXITSTATUS(status) != 0) {
+	if (WEXITSTATUS(status) != 0)
+	{
 		tun_error("could not load ppp kext \"%s\"", PPP_KEXT_PATH);
 		return -1;
 	}
@@ -137,18 +143,18 @@ static int ppp_load_kext() {
 	return 0;
 }
 
-static int ppp_new_instance() {
+static int ppp_new_instance()
+{
 	// create ppp socket
     int ppp_sockfd = socket(PF_PPP, SOCK_RAW, PPPPROTO_CTL);
-
+    if (ppp_sockfd < 0)
-	if(ppp_sockfd < 0) {
+	{
-		if(ppp_load_kext() < 0) {
+		if (ppp_load_kext() < 0)
 			return -1;
-		}
 
 		ppp_sockfd = socket(PF_PPP, SOCK_RAW, PPPPROTO_CTL);
-
+		if (ppp_sockfd < 0)
-		if(ppp_sockfd < 0) {
+		{
 			tun_error("creating ppp socket: %s", strerror(errno));
 			return -1;
 		}
@@ -160,8 +166,8 @@ static int ppp_new_instance() {
     pppaddr.ppp_family = AF_PPP;
     pppaddr.ppp_proto = PPPPROTO_CTL;
     pppaddr.ppp_cookie = 0;
-
+    if (connect(ppp_sockfd, (struct sockaddr *)&pppaddr, sizeof(struct sockaddr_ppp)) < 0)
-	if(connect(ppp_sockfd, (struct sockaddr *)&pppaddr, sizeof(struct sockaddr_ppp)) < 0) {
+	{
 		tun_error("connecting ppp socket: %s", strerror(errno));
 		close(ppp_sockfd);
 		return -1;
@@ -171,15 +177,15 @@ static int ppp_new_instance() {
 	return ppp_sockfd;
 }
 
-static int ppp_new_unit(int *unit_number) {
+static int ppp_new_unit(int *unit_number)
+{
 	int fd = ppp_new_instance();
-
+	if (fd < 0)
-	if(fd < 0) {
 		return -1;
-	}
 
 	// create ppp unit
-	if(ioctl(fd, PPPIOCNEWUNIT, unit_number) < 0) {
+	if (ioctl(fd, PPPIOCNEWUNIT, unit_number) < 0)
+	{
 		tun_error("creating ppp unit: %s", strerror(errno));
 		close(fd);
 		return -1;
@@ -189,11 +195,12 @@ static int ppp_new_unit(int *unit_number) {
 	return fd;
 }
 
-static int ppp_setup_unit(int unit_fd) {
+static int ppp_setup_unit(int unit_fd)
+{
 	// send traffic to program
 	int flags = SC_LOOP_TRAFFIC;
-
+	if (ioctl(unit_fd, PPPIOCSFLAGS, &flags) < 0)
-	if(ioctl(unit_fd, PPPIOCSFLAGS, &flags) < 0) {
+	{
 		tun_error("setting ppp loopback mode: %s", strerror(errno));
 		return -1;
     }
@@ -202,8 +209,8 @@ static int ppp_setup_unit(int unit_fd) {
 	struct npioctl npi;
 	npi.protocol = PPP_IP;
 	npi.mode = NPMODE_PASS;
-
+	if (ioctl(unit_fd, PPPIOCSNPMODE, &npi) < 0)
-	if(ioctl(unit_fd, PPPIOCSNPMODE, &npi) < 0) {
+	{
 		tun_error("starting ppp unit: %s", strerror(errno));
 		return -1;
 	}
@@ -212,8 +219,10 @@ static int ppp_setup_unit(int unit_fd) {
 	return 0;
 }
 
-static int open_pcap() {
+static int open_pcap()
-	if(pcap != NULL) {
+{
+	if (pcap != NULL)
+	{
 		pcap_use_count++;
 		return 0;
 	}
@@ -222,7 +231,8 @@ static int open_pcap() {
 	pcap = pcap_open_live("lo0", BUFSIZ, 0, 1, errbuf);
 	pcap_use_count = 1;
 
-	if(pcap == NULL) {
+	if (pcap == NULL)
+	{
 		tun_error("opening pcap: %s", errbuf);
 		return -1;
 	}
@@ -231,57 +241,59 @@ static int open_pcap() {
 	return 0;
 }
 
-static void close_pcap() {
+static void close_pcap()
-	if(pcap == NULL) {
+{
+	if (pcap == NULL)
 		return;
-	}
 
 	pcap_use_count--;
-
+	if (pcap_use_count == 0)
-	if(pcap_use_count == 0) {
+	{
 		pcap_close(pcap);
 		pcap = NULL;
 	}
 }
 
-static void allocate_data_buffer(int size) {
+static void allocate_data_buffer(int size)
-	if(data_buffer_length < size) {
+{
+	if (data_buffer_length < size)
+	{
 		free(data_buffer);
 		data_buffer_length = size;
 		data_buffer = malloc(data_buffer_length);
 	}
 }
 
-static void make_device_name(tunemu_device device, int unit_number) {
+static void make_device_name(tunemu_device device, int unit_number)
+{
 	snprintf(device, sizeof(tunemu_device), "ppp%d", unit_number);
 }
 
-static int check_device_name(tunemu_device device) {
+static int check_device_name(tunemu_device device)
-	if(strlen(device) < 4) {
+{
+	if (strlen(device) < 4)
 		return -1;
-	}
 
 	int unit_number = atoi(device + 3);
-
+	if (unit_number < 0 || unit_number > 999)
-	if(unit_number < 0 || unit_number > 999) {
 		return -1;
-	}
 
 	tunemu_device compare;
 	make_device_name(compare, unit_number);
 
-	if(strcmp(device, compare) != 0) {
+	if (strcmp(device, compare) != 0)
 		return -1;
-	}
 
 	return 0;
 }
 
-int tunemu_open(tunemu_device device) {
+int tunemu_open(tunemu_device device)
+{
 	int ppp_unit_number = -1;
-
+	if (device[0] != 0)
-	if(device[0] != 0) {
+	{
-		if(check_device_name(device) < 0) {
+		if (check_device_name(device) < 0)
+		{
 			tun_error("invalid device name \"%s\"", device);
 			return -1;
 		}
@@ -290,17 +302,17 @@ int tunemu_open(tunemu_device device) {
 	}
 
 	int ppp_unit_fd = ppp_new_unit(&ppp_unit_number);
-
+	if (ppp_unit_fd < 0)
-	if(ppp_unit_fd < 0) {
 		return -1;
-	}
 
-	if(ppp_setup_unit(ppp_unit_fd) < 0) {
+	if (ppp_setup_unit(ppp_unit_fd) < 0)
+	{
 		close(ppp_unit_fd);
 		return -1;
 	}
 
-	if(open_pcap() < 0) {
+	if (open_pcap() < 0)
+	{
 		close(ppp_unit_fd);
 		return -1;
 	}
@@ -310,40 +322,39 @@ int tunemu_open(tunemu_device device) {
 	return ppp_unit_fd;
 }
 
-int tunemu_close(int ppp_sockfd) {
+int tunemu_close(int ppp_sockfd)
+{
 	int ret = close(ppp_sockfd);
 
-	if(ret == 0) {
+	if (ret == 0)
 		close_pcap();
-	}
 
 	return ret;
 }
 
-int tunemu_read(int ppp_sockfd, char *buffer, int length) {
+int tunemu_read(int ppp_sockfd, char *buffer, int length)
+{
 	allocate_data_buffer(length + 2);
 
 	length = read(ppp_sockfd, data_buffer, length + 2);
-
+	if (length < 0)
-	if(length < 0) {
+	{
 		tun_error("reading packet: %s", strerror(errno));
 		return length;
 	}
-
 	tun_noerror();
 
 	length -= 2;
-
+	if (length < 0)
-	if(length < 0) {
 		return 0;
-	}
 
 	memcpy(buffer, data_buffer + 2, length);
 
 	return length;
 }
 
-int tunemu_write(int ppp_sockfd, char *buffer, int length) {
+int tunemu_write(int ppp_sockfd, char *buffer, int length)
+{
 	allocate_data_buffer(length + 4);
 
 	data_buffer[0] = 0x02;
@@ -353,25 +364,23 @@ int tunemu_write(int ppp_sockfd, char *buffer, int length) {
 
 	memcpy(data_buffer + 4, buffer, length);
 
-	if(pcap == NULL) {
+	if (pcap == NULL)
+	{
 		tun_error("pcap not open");
 		return -1;
 	}
 
 	length = pcap_inject(pcap, data_buffer, length + 4);
-
+	if (length < 0)
-	if(length < 0) {
+	{
 		tun_error("injecting packet: %s", pcap_geterr(pcap));
 		return length;
 	}
-
 	tun_noerror();
 
 	length -= 4;
-
+	if (length < 0)
-	if(length < 0) {
 		return 0;
-	}
 
 	return length;
 }

src/buffer.c

@@ -0,0 +1,108 @@
+/*
+    buffer.c -- buffer management
+    Copyright (C) 2011 Guus Sliepen <guus@tinc-vpn.org>,
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License along
+    with this program; if not, write to the Free Software Foundation, Inc.,
+    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+*/
+
+#include "system.h"
+
+#include "buffer.h"
+#include "xalloc.h"
+
+void buffer_compact(buffer_t *buffer, int maxsize) {
+	if(buffer->len >= maxsize || buffer->offset / 7 > buffer->len / 8) {
+		memmove(buffer->data, buffer->data + buffer->offset, buffer->len - buffer->offset);
+		buffer->len -= buffer->offset;
+		buffer->offset = 0;
+	}
+}
+
+// Make sure we can add size bytes to the buffer, and return a pointer to the start of those bytes.
+
+char *buffer_prepare(buffer_t *buffer, int size) {
+	if(!buffer->data) {
+		buffer->maxlen = size;
+		buffer->data = xmalloc(size);
+	} else {
+		if(buffer->offset && buffer->len + size > buffer->maxlen) {
+			memmove(buffer->data, buffer->data + buffer->offset, buffer->len - buffer->offset);
+			buffer->len -= buffer->offset;
+			buffer->offset = 0;
+		}
+
+		if(buffer->len + size > buffer->maxlen) {
+			buffer->maxlen = buffer->len + size;
+			buffer->data = xrealloc(buffer->data, buffer->maxlen);
+		}
+	}
+
+	char *start = buffer->data + buffer->len;
+
+	buffer->len += size;
+
+	return start;
+}
+
+// Copy data into the buffer.
+			
+void buffer_add(buffer_t *buffer, const char *data, int size) {
+	memcpy(buffer_prepare(buffer, size), data, size);
+}
+
+// Remove given number of bytes from the buffer, return a pointer to the start of them.
+
+static char *buffer_consume(buffer_t *buffer, int size) {
+	char *start = buffer->data + buffer->offset;
+
+	buffer->offset += size;
+
+	if(buffer->offset >= buffer->len) {
+		buffer->offset = 0;
+		buffer->len = 0;
+	}
+
+	return start;
+}
+
+// Check if there is a complete line in the buffer, and if so, return it NULL-terminated.
+
+char *buffer_readline(buffer_t *buffer) {
+	char *newline = memchr(buffer->data + buffer->offset, '\n', buffer->len - buffer->offset);
+
+	if(!newline)
+		return NULL;
+
+	int len = newline + 1 - (buffer->data + buffer->offset);
+	*newline = 0;
+	return buffer_consume(buffer, len);
+}
+
+// Check if we have enough bytes in the buffer, and if so, return a pointer to the start of them.
+
+char *buffer_read(buffer_t *buffer, int size) {
+	if(buffer->len - buffer->offset < size)
+		return NULL;
+
+	return buffer_consume(buffer, size);
+}
+
+void buffer_clear(buffer_t *buffer) {
+	free(buffer->data);
+	buffer->data = NULL;
+	buffer->maxlen = 0;
+	buffer->len = 0;
+	buffer->offset = 0;
+}

src/buffer.h

@@ -0,0 +1,18 @@
+#ifndef __TINC_BUFFER_H__
+#define __TINC_BUFFER_H__
+
+typedef struct buffer_t {
+	char *data;
+	int maxlen;
+	int len;
+	int offset;
+} buffer_t;
+
+extern void buffer_compact(buffer_t *buffer, int maxsize);
+extern char *buffer_prepare(buffer_t *buffer, int size);
+extern void buffer_add(buffer_t *buffer, const char *data, int size);
+extern char *buffer_readline(buffer_t *buffer);
+extern char *buffer_read(buffer_t *buffer, int size);
+extern void buffer_clear(buffer_t *buffer);
+
+#endif

src/conf.c

@@ -2,7 +2,7 @@
     conf.c -- configuration code
     Copyright (C) 1998 Robert van der Meulen
                   1998-2005 Ivo Timmermans
-                  2000-2014 Guus Sliepen <guus@tinc-vpn.org>
+                  2000-2010 Guus Sliepen <guus@tinc-vpn.org>
                   2010-2011 Julien Muchembled <jm@jmuchemb.eu>
 		  2000 Cris van Pelt
 
@@ -23,7 +23,7 @@
 
 #include "system.h"
 
-#include "avl_tree.h"
+#include "splay_tree.h"
 #include "connection.h"
 #include "conf.h"
 #include "list.h"
@@ -33,7 +33,7 @@
 #include "utils.h"				/* for cp */
 #include "xalloc.h"
 
-avl_tree_t *config_tree;
+splay_tree_t *config_tree;
 
 int pinginterval = 0;			/* seconds between pings */
 int pingtimeout = 0;			/* seconds to wait for response */
@@ -47,32 +47,28 @@ static int config_compare(const config_t *a, const config_t *b) {
 
 	result = strcasecmp(a->variable, b->variable);
 
-	if(result) {
+	if(result)
 		return result;
-	}
 
 	/* give priority to command line options */
 	result = !b->file - !a->file;
-
+	if (result)
-	if(result) {
 		return result;
-	}
 
 	result = a->line - b->line;
 
-	if(result) {
+	if(result)
 		return result;
-	} else {
+	else
 		return a->file ? strcmp(a->file, b->file) : 0;
-	}
 }
 
-void init_configuration(avl_tree_t **config_tree) {
+void init_configuration(splay_tree_t ** config_tree) {
-	*config_tree = avl_alloc_tree((avl_compare_t) config_compare, (avl_action_t) free_config);
+	*config_tree = splay_alloc_tree((splay_compare_t) config_compare, (splay_action_t) free_config);
 }
 
-void exit_configuration(avl_tree_t **config_tree) {
+void exit_configuration(splay_tree_t ** config_tree) {
-	avl_delete_tree(*config_tree);
+	splay_delete_tree(*config_tree);
 	*config_tree = NULL;
 }
 
@@ -81,59 +77,61 @@ config_t *new_config(void) {
 }
 
 void free_config(config_t *cfg) {
+	if(cfg->variable)
 		free(cfg->variable);
+
+	if(cfg->value)
 		free(cfg->value);
+
+	if(cfg->file)
 		free(cfg->file);
+
 	free(cfg);
 }
 
-void config_add(avl_tree_t *config_tree, config_t *cfg) {
+void config_add(splay_tree_t *config_tree, config_t *cfg) {
-	avl_insert(config_tree, cfg);
+	splay_insert(config_tree, cfg);
 }
 
-config_t *lookup_config(const avl_tree_t *config_tree, char *variable) {
+config_t *lookup_config(splay_tree_t *config_tree, char *variable) {
 	config_t cfg, *found;
 
 	cfg.variable = variable;
 	cfg.file = NULL;
 	cfg.line = 0;
 
-	found = avl_search_closest_greater(config_tree, &cfg);
+	found = splay_search_closest_greater(config_tree, &cfg);
 
-	if(!found) {
+	if(!found)
 		return NULL;
-	}
 
-	if(strcasecmp(found->variable, variable)) {
+	if(strcasecmp(found->variable, variable))
 		return NULL;
-	}
 
 	return found;
 }
 
-config_t *lookup_config_next(const avl_tree_t *config_tree, const config_t *cfg) {
+config_t *lookup_config_next(splay_tree_t *config_tree, const config_t *cfg) {
-	avl_node_t *node;
+	splay_node_t *node;
 	config_t *found;
 
-	node = avl_search_node(config_tree, cfg);
+	node = splay_search_node(config_tree, cfg);
 
 	if(node) {
 		if(node->next) {
 			found = node->next->data;
 
-			if(!strcasecmp(found->variable, cfg->variable)) {
+			if(!strcasecmp(found->variable, cfg->variable))
 				return found;
 		}
 	}
-	}
 
 	return NULL;
 }
 
 bool get_config_bool(const config_t *cfg, bool *result) {
-	if(!cfg) {
+	if(!cfg)
 		return false;
-	}
 
 	if(!strcasecmp(cfg->value, "yes")) {
 		*result = true;
@@ -150,13 +148,11 @@ bool get_config_bool(const config_t *cfg, bool *result) {
 }
 
 bool get_config_int(const config_t *cfg, int *result) {
-	if(!cfg) {
+	if(!cfg)
 		return false;
-	}
 
-	if(sscanf(cfg->value, "%d", result) == 1) {
+	if(sscanf(cfg->value, "%d", result) == 1)
 		return true;
-	}
 
 	logger(LOG_ERR, "Integer expected for configuration variable %s in %s line %d",
 		   cfg->variable, cfg->file, cfg->line);
@@ -165,9 +161,8 @@ bool get_config_int(const config_t *cfg, int *result) {
 }
 
 bool get_config_string(const config_t *cfg, char **result) {
-	if(!cfg) {
+	if(!cfg)
 		return false;
-	}
 
 	*result = xstrdup(cfg->value);
 
@@ -177,9 +172,8 @@ bool get_config_string(const config_t *cfg, char **result) {
 bool get_config_address(const config_t *cfg, struct addrinfo **result) {
 	struct addrinfo *ai;
 
-	if(!cfg) {
+	if(!cfg)
 		return false;
-	}
 
 	ai = str2addrinfo(cfg->value, NULL, 0);
 
@@ -194,12 +188,11 @@ bool get_config_address(const config_t *cfg, struct addrinfo **result) {
 	return false;
 }
 
-bool get_config_subnet(const config_t *cfg, subnet_t **result) {
+bool get_config_subnet(const config_t *cfg, subnet_t ** result) {
-	subnet_t subnet = {0};
+	subnet_t subnet = {NULL};
 
-	if(!cfg) {
+	if(!cfg)
 		return false;
-	}
 
 	if(!str2net(&subnet, cfg->value)) {
 		logger(LOG_ERR, "Subnet expected for configuration variable %s in %s line %d",
@@ -210,9 +203,9 @@ bool get_config_subnet(const config_t *cfg, subnet_t **result) {
 	/* Teach newbies what subnets are... */
 
 	if(((subnet.type == SUBNET_IPV4)
-	                && !maskcheck(&subnet.net.ipv4.address, subnet.net.ipv4.prefixlength, sizeof(ipv4_t)))
+		&& !maskcheck(&subnet.net.ipv4.address, subnet.net.ipv4.prefixlength, sizeof subnet.net.ipv4.address))
 		|| ((subnet.type == SUBNET_IPV6)
-	                    && !maskcheck(&subnet.net.ipv6.address, subnet.net.ipv6.prefixlength, sizeof(ipv6_t)))) {
+		&& !maskcheck(&subnet.net.ipv6.address, subnet.net.ipv6.prefixlength, sizeof subnet.net.ipv6.address))) {
 		logger(LOG_ERR, "Network address and prefix length do not match for configuration variable %s in %s line %d",
 			   cfg->variable, cfg->file, cfg->line);
 		return false;
@@ -226,31 +219,26 @@ bool get_config_subnet(const config_t *cfg, subnet_t **result) {
 /*
   Read exactly one line and strip the trailing newline if any.
 */
-static char *readline(FILE *fp, char *buf, size_t buflen) {
+static char *readline(FILE * fp, char *buf, size_t buflen) {
 	char *newline = NULL;
 	char *p;
 
-	if(feof(fp)) {
+	if(feof(fp))
 		return NULL;
-	}
 
 	p = fgets(buf, buflen, fp);
 
-	if(!p) {
+	if(!p)
 		return NULL;
-	}
 
 	newline = strchr(p, '\n');
 
-	if(!newline) {
+	if(!newline)
 		return buf;
-	}
 
 	*newline = '\0';	/* kill newline */
-
+	if(newline > p && newline[-1] == '\r')	/* and carriage return if necessary */
-	if(newline > p && newline[-1] == '\r') { /* and carriage return if necessary */
 		newline[-1] = '\0';
-	}
 
 	return buf;
 }
@@ -262,32 +250,26 @@ config_t *parse_config_line(char *line, const char *fname, int lineno) {
 	variable = value = line;
 
 	eol = line + strlen(line);
-
+	while(strchr("\t ", *--eol))
-	while(strchr("\t ", *--eol)) {
 		*eol = '\0';
-	}
 
 	len = strcspn(value, "\t =");
 	value += len;
 	value += strspn(value, "\t ");
-
 	if(*value == '=') {
 		value++;
 		value += strspn(value, "\t ");
 	}
-
 	variable[len] = '\0';
 
 	if(!*value) {
 		const char err[] = "No value for variable";
-
+		if (fname)
-		if(fname)
 			logger(LOG_ERR, "%s `%s' on line %d while reading config file %s",
 				err, variable, lineno, fname);
 		else
 			logger(LOG_ERR, "%s `%s' in command line option %d",
 				err, variable, lineno);
-
 		return NULL;
 	}
 
@@ -304,7 +286,7 @@ config_t *parse_config_line(char *line, const char *fname, int lineno) {
   Parse a configuration file and put the results in the configuration tree
   starting at *base.
 */
-bool read_config_file(avl_tree_t *config_tree, const char *fname) {
+bool read_config_file(splay_tree_t *config_tree, const char *fname) {
 	FILE *fp;
 	char buffer[MAX_STRING_SIZE];
 	char *line;
@@ -321,27 +303,22 @@ bool read_config_file(avl_tree_t *config_tree, const char *fname) {
 	}
 
 	for(;;) {
-		line = readline(fp, buffer, sizeof(buffer));
+		line = readline(fp, buffer, sizeof buffer);
 
 		if(!line) {
-			if(feof(fp)) {
+			if(feof(fp))
 				result = true;
-			}
-
 			break;
 		}
 
 		lineno++;
 
-		if(!*line || *line == '#') {
+		if(!*line || *line == '#')
 			continue;
-		}
 
 		if(ignore) {
-			if(!strncmp(line, "-----END", 8)) {
+			if(!strncmp(line, "-----END", 8))
 				ignore = false;
-			}
-
 			continue;
 		}
 		
@@ -351,11 +328,8 @@ bool read_config_file(avl_tree_t *config_tree, const char *fname) {
 		}
 
 		cfg = parse_config_line(line, fname, lineno);
-
+		if (!cfg)
-		if(!cfg) {
 			break;
-		}
-
 		config_add(config_tree, cfg);
 	}
 
@@ -364,234 +338,122 @@ bool read_config_file(avl_tree_t *config_tree, const char *fname) {
 	return result;
 }
 
-void read_config_options(avl_tree_t *config_tree, const char *prefix) {
+void read_config_options(splay_tree_t *config_tree, const char *prefix) {
+	list_node_t *node, *next;
 	size_t prefix_len = prefix ? strlen(prefix) : 0;
 
-	for(const list_node_t *node = cmdline_conf->tail; node; node = node->prev) {
+	for(node = cmdline_conf->tail; node; node = next) {
-		const config_t *cfg = node->data;
+		config_t *orig_cfg, *cfg = (config_t *)node->data;
+		next = node->prev;
 
 		if(!prefix) {
-			if(strchr(cfg->variable, '.')) {
+			if(strchr(cfg->variable, '.'))
 				continue;
-			}
+			node->data = NULL;
+			list_unlink_node(cmdline_conf, node);
 		} else {
 			if(strncmp(prefix, cfg->variable, prefix_len) ||
-			                cfg->variable[prefix_len] != '.') {
+			   cfg->variable[prefix_len] != '.')
 				continue;
+			/* Because host configuration is parsed again when
+			   reconnecting, nodes must not be freed when a prefix
+			   is given. */
+			orig_cfg = cfg;
+			cfg = new_config();
+			cfg->variable = xstrdup(orig_cfg->variable + prefix_len + 1);
+			cfg->value = xstrdup(orig_cfg->value);
+			cfg->file = NULL;
+			cfg->line = orig_cfg->line;
 		}
-		}
+		config_add(config_tree, cfg);
-
-		config_t *new = new_config();
-
-		if(prefix) {
-			new->variable = xstrdup(cfg->variable + prefix_len + 1);
-		} else {
-			new->variable = xstrdup(cfg->variable);
-		}
-
-		new->value = xstrdup(cfg->value);
-		new->file = NULL;
-		new->line = cfg->line;
-
-		config_add(config_tree, new);
 	}
 }
 
 bool read_server_config(void) {
-	char fname[PATH_MAX];
+	char *fname;
 	bool x;
 
 	read_config_options(config_tree, NULL);
 
-	snprintf(fname, sizeof(fname), "%s/tinc.conf", confbase);
+	xasprintf(&fname, "%s/tinc.conf", confbase);
-	errno = 0;
 	x = read_config_file(config_tree, fname);
 
-	// We will try to read the conf files in the "conf.d" dir
+	if(!x) {				/* System error: complain */
-	if(x) {
-		char dname[PATH_MAX];
-		snprintf(dname, sizeof(dname), "%s/conf.d", confbase);
-		DIR *dir = opendir(dname);
-
-		// If we can find this dir
-		if(dir) {
-			struct dirent *ep;
-
-			// We list all the files in it
-			while(x && (ep = readdir(dir))) {
-				size_t l = strlen(ep->d_name);
-
-				// And we try to read the ones that end with ".conf"
-				if(l > 5 && !strcmp(".conf", & ep->d_name[ l - 5 ])) {
-					if((size_t)snprintf(fname, sizeof(fname), "%s/%s", dname, ep->d_name) >= sizeof(fname)) {
-						logger(LOG_ERR, "Pathname too long: %s/%s", dname, ep->d_name);
-						return false;
-					}
-
-					x = read_config_file(config_tree, fname);
-				}
-			}
-
-			closedir(dir);
-		}
-	}
-
-	if(!x && errno) {
 		logger(LOG_ERR, "Failed to read `%s': %s", fname, strerror(errno));
 	}
 
+	free(fname);
+
 	return x;
 }
 
 bool read_connection_config(connection_t *c) {
-	char fname[PATH_MAX];
+	char *fname;
 	bool x;
 
 	read_config_options(c->config_tree, c->name);
 
-	snprintf(fname, sizeof(fname), "%s/hosts/%s", confbase, c->name);
+	xasprintf(&fname, "%s/hosts/%s", confbase, c->name);
 	x = read_config_file(c->config_tree, fname);
+	free(fname);
 
 	return x;
 }
 
-static void disable_old_keys(const char *filename) {
+bool append_config_file(const char *name, const char *key, const char *value) {
-	char tmpfile[PATH_MAX] = "";
+	char *fname;
-	char buf[1024];
+	xasprintf(&fname, "%s/hosts/%s", confbase, name);
-	bool disabled = false;
-	FILE *r, *w;
 
-	r = fopen(filename, "r");
+	FILE *fp = fopen(fname, "a");
 
-	if(!r) {
+	if(!fp) {
-		return;
+		logger(LOG_ERR, "Cannot open config file %s: %s", fname, strerror(errno));
+	} else {
+		fprintf(fp, "\n# The following line was automatically added by tinc\n%s = %s\n", key, value);
+		fclose(fp);
 	}
 
-	snprintf(tmpfile, sizeof(tmpfile), "%s.tmp", filename);
+	free(fname);
 
-	w = fopen(tmpfile, "w");
+	return fp;
+}
 
-	while(fgets(buf, sizeof(buf), r)) {
+bool disable_old_keys(FILE *f) {
+	char buf[100];
+	long pos;
+	bool disabled = false;
+
+	rewind(f);
+	pos = ftell(f);
+
+	if(pos < 0)
+		return false;
+
+	while(fgets(buf, sizeof buf, f)) {
 		if(!strncmp(buf, "-----BEGIN RSA", 14)) {	
 			buf[11] = 'O';
 			buf[12] = 'L';
 			buf[13] = 'D';
+			if(fseek(f, pos, SEEK_SET))
+				break;
+			if(fputs(buf, f) <= 0)
+				break;
 			disabled = true;
-		} else if(!strncmp(buf, "-----END RSA", 12)) {
+		}
+		else if(!strncmp(buf, "-----END RSA", 12)) {	
 			buf[ 9] = 'O';
 			buf[10] = 'L';
 			buf[11] = 'D';
+			if(fseek(f, pos, SEEK_SET))
+				break;
+			if(fputs(buf, f) <= 0)
+				break;
 			disabled = true;
 		}
-
+		pos = ftell(f);
-		if(w && fputs(buf, w) < 0) {
+		if(pos < 0)
-			disabled = false;
 			break;
 	}
-	}
 
-	if(w) {
+	return disabled;
-		fclose(w);
-	}
-
-	fclose(r);
-
-	if(!w && disabled) {
-		fprintf(stderr, "Warning: old key(s) found, remove them by hand!\n");
-		return;
-	}
-
-	if(disabled) {
-#ifdef HAVE_MINGW
-		// We cannot atomically replace files on Windows.
-		char bakfile[PATH_MAX] = "";
-		snprintf(bakfile, sizeof(bakfile), "%s.bak", filename);
-
-		if(rename(filename, bakfile) || rename(tmpfile, filename)) {
-			rename(bakfile, filename);
-#else
-
-		if(rename(tmpfile, filename)) {
-#endif
-			fprintf(stderr, "Warning: old key(s) found, remove them by hand!\n");
-		} else  {
-#ifdef HAVE_MINGW
-			unlink(bakfile);
-#endif
-			fprintf(stderr, "Warning: old key(s) found and disabled.\n");
-		}
-	}
-
-	unlink(tmpfile);
 }
-
-FILE *ask_and_open(const char *filename, const char *what) {
-	FILE *r;
-	char directory[PATH_MAX];
-	char line[PATH_MAX];
-	char abspath[PATH_MAX];
-	const char *fn;
-
-	/* Check stdin and stdout */
-	if(!isatty(0) || !isatty(1)) {
-		/* Argh, they are running us from a script or something.  Write
-		   the files to the current directory and let them burn in hell
-		   for ever. */
-		fn = filename;
-	} else {
-		/* Ask for a file and/or directory name. */
-		fprintf(stdout, "Please enter a file to save %s to [%s]: ",
-		        what, filename);
-		fflush(stdout);
-
-		fn = readline(stdin, line, sizeof(line));
-
-		if(!fn) {
-			fprintf(stderr, "Error while reading stdin: %s\n",
-			        strerror(errno));
-			return NULL;
-		}
-
-		if(!strlen(fn))
-			/* User just pressed enter. */
-		{
-			fn = filename;
-		}
-	}
-
-#ifdef HAVE_MINGW
-
-	if(fn[0] != '\\' && fn[0] != '/' && !strchr(fn, ':')) {
-#else
-
-	if(fn[0] != '/') {
-#endif
-		/* The directory is a relative path or a filename. */
-		getcwd(directory, sizeof(directory));
-
-		if((size_t)snprintf(abspath, sizeof(abspath), "%s/%s", directory, fn) >= sizeof(abspath)) {
-			fprintf(stderr, "Pathname too long: %s/%s\n", directory, fn);
-			return NULL;
-		}
-
-		fn = abspath;
-	}
-
-	umask(0077);                            /* Disallow everything for group and other */
-
-	disable_old_keys(fn);
-
-	/* Open it first to keep the inode busy */
-
-	r = fopen(fn, "a");
-
-	if(!r) {
-		fprintf(stderr, "Error opening file `%s': %s\n",
-		        fn, strerror(errno));
-		return NULL;
-	}
-
-	return r;
-}
-
-

src/conf.h

@@ -1,10 +1,7 @@
-#ifndef TINC_CONF_H
-#define TINC_CONF_H
-
 /*
     conf.h -- header for conf.c
     Copyright (C) 1998-2005 Ivo Timmermans
-                  2000-2012 Guus Sliepen <guus@tinc-vpn.org>
+                  2000-2009 Guus Sliepen <guus@tinc-vpn.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -21,7 +18,10 @@
     51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 */
 
-#include "avl_tree.h"
+#ifndef __TINC_CONF_H__
+#define __TINC_CONF_H__
+
+#include "splay_tree.h"
 #include "list.h"
 
 typedef struct config_t {
@@ -33,35 +33,37 @@ typedef struct config_t {
 
 #include "subnet.h"
 
-extern avl_tree_t *config_tree;
+extern splay_tree_t *config_tree;
 
 extern int pinginterval;
 extern int pingtimeout;
 extern int maxtimeout;
-extern int mintimeout;
 extern bool bypass_security;
 extern char *confbase;
 extern char *netname;
 extern list_t *cmdline_conf;
 
-extern void init_configuration(avl_tree_t **config_tree);
+extern void init_configuration(splay_tree_t **);
-extern void exit_configuration(avl_tree_t **config_tree);
+extern void exit_configuration(splay_tree_t **);
-extern config_t *new_config(void) __attribute__((__malloc__));
+extern config_t *new_config(void) __attribute__ ((__malloc__));
-extern void free_config(config_t *cfg);
+extern void free_config(config_t *);
-extern void config_add(avl_tree_t *config_tree, config_t *cfg);
+extern void config_add(splay_tree_t *, config_t *);
-extern config_t *lookup_config(const avl_tree_t *config_tree, char *variable);
+extern config_t *lookup_config(splay_tree_t *, char *);
-extern config_t *lookup_config_next(const avl_tree_t *config_tree, const config_t *cfg);
+extern config_t *lookup_config_next(splay_tree_t *, const config_t *);
-extern bool get_config_bool(const config_t *cfg, bool *result);
+extern bool get_config_bool(const config_t *, bool *);
-extern bool get_config_int(const config_t *cfg, int *result);
+extern bool get_config_int(const config_t *, int *);
-extern bool get_config_string(const config_t *cfg, char **result);
+extern bool get_config_string(const config_t *, char **);
-extern bool get_config_address(const config_t *cfg, struct addrinfo **result);
+extern bool get_config_address(const config_t *, struct addrinfo **);
-extern bool get_config_subnet(const config_t *cfg, struct subnet_t **result);
+extern bool get_config_subnet(const config_t *, struct subnet_t **);
 
-extern config_t *parse_config_line(char *line, const char *fname, int lineno);
+extern config_t *parse_config_line(char *, const char *, int);
-extern bool read_config_file(avl_tree_t *config_tree, const char *fname);
+extern bool read_config_file(splay_tree_t *, const char *);
-extern void read_config_options(avl_tree_t *config_tree, const char *prefix);
+extern void read_config_options(splay_tree_t *, const char *);
 extern bool read_server_config(void);
-extern bool read_connection_config(struct connection_t *c);
+extern bool read_connection_config(struct connection_t *);
-extern FILE *ask_and_open(const char *fname, const char *what);
+extern bool append_config_file(const char *, const char *, const char *);
+extern FILE *ask_and_open(const char *, const char *, const char *);
+extern bool is_safe_path(const char *);
+extern bool disable_old_keys(FILE *);
 
-#endif
+#endif							/* __TINC_CONF_H__ */

src/connection.c

@@ -1,6 +1,6 @@
 /*
     connection.c -- connection list management
-    Copyright (C) 2000-2016 Guus Sliepen <guus@tinc-vpn.org>,
+    Copyright (C) 2000-2009 Guus Sliepen <guus@tinc-vpn.org>,
                   2000-2005 Ivo Timmermans
                   2008      Max Rijevski <maksuf@gmail.com>
 
@@ -21,131 +21,98 @@
 
 #include "system.h"
 
-#include "avl_tree.h"
+#include "splay_tree.h"
+#include "cipher.h"
 #include "conf.h"
+#include "control_common.h"
+#include "list.h"
 #include "logger.h"
 #include "subnet.h"
 #include "utils.h"
 #include "xalloc.h"
 
-avl_tree_t *connection_tree;    /* Meta connections */
+splay_tree_t *connection_tree;	/* Meta connections */
-connection_t *everyone;
+connection_t *broadcast;
 
 static int connection_compare(const connection_t *a, const connection_t *b) {
 	return a < b ? -1 : a == b ? 0 : 1;
 }
 
 void init_connections(void) {
-	connection_tree = avl_alloc_tree((avl_compare_t) connection_compare, (avl_action_t) free_connection);
+	connection_tree = splay_alloc_tree((splay_compare_t) connection_compare, (splay_action_t) free_connection);
-	everyone = new_connection();
+	broadcast = new_connection();
-	everyone->name = xstrdup("everyone");
+	broadcast->name = xstrdup("everyone");
-	everyone->hostname = xstrdup("BROADCAST");
+	broadcast->hostname = xstrdup("BROADCAST");
 }
 
 void exit_connections(void) {
-	avl_delete_tree(connection_tree);
+	splay_delete_tree(connection_tree);
-	free_connection(everyone);
+	free_connection(broadcast);
 }
 
 connection_t *new_connection(void) {
-	connection_t *c;
+	return xmalloc_and_zero(sizeof(connection_t));
-
-	c = xmalloc_and_zero(sizeof(connection_t));
-
-	if(!c) {
-		return NULL;
-	}
-
-	gettimeofday(&c->start, NULL);
-
-	return c;
-}
-
-void free_connection_partially(connection_t *c) {
-	free(c->inkey);
-	free(c->outkey);
-	free(c->mychallenge);
-	free(c->hischallenge);
-	free(c->outbuf);
-
-	c->inkey = NULL;
-	c->outkey = NULL;
-	c->mychallenge = NULL;
-	c->hischallenge = NULL;
-	c->outbuf = NULL;
-
-	c->status.pinged = false;
-	c->status.active = false;
-	c->status.connecting = false;
-	c->status.timeout = false;
-	c->status.encryptout = false;
-	c->status.decryptin = false;
-	c->status.mst = false;
-
-	c->options = 0;
-	c->buflen = 0;
-	c->reqlen = 0;
-	c->tcplen = 0;
-	c->allow_request = 0;
-	c->outbuflen = 0;
-	c->outbufsize = 0;
-	c->outbufstart = 0;
-	c->last_ping_time = 0;
-	c->last_flushed_time = 0;
-	c->inbudget = 0;
-	c->outbudget = 0;
-
-	if(c->inctx) {
-		EVP_CIPHER_CTX_cleanup(c->inctx);
-		free(c->inctx);
-		c->inctx = NULL;
-	}
-
-	if(c->outctx) {
-		EVP_CIPHER_CTX_cleanup(c->outctx);
-		free(c->outctx);
-		c->outctx = NULL;
-	}
-
-	if(c->rsa_key) {
-		RSA_free(c->rsa_key);
-		c->rsa_key = NULL;
-	}
 }
 
 void free_connection(connection_t *c) {
-	free_connection_partially(c);
+	if(!c)
+		return;
 
+	if(c->name)
 		free(c->name);
+
+	if(c->hostname)
 		free(c->hostname);
 
-	if(c->config_tree) {
+	cipher_close(&c->incipher);
+	digest_close(&c->indigest);
+	cipher_close(&c->outcipher);
+	digest_close(&c->outdigest);
+
+	ecdh_free(&c->ecdh);
+	ecdsa_free(&c->ecdsa);
+	rsa_free(&c->rsa);
+
+	if(c->hischallenge)
+		free(c->hischallenge);
+
+	if(c->config_tree)
 		exit_configuration(&c->config_tree);
-	}
+
+	buffer_clear(&c->inbuf);
+	buffer_clear(&c->outbuf);
+	
+	if(event_initialized(&c->inevent))
+		event_del(&c->inevent);
+
+	if(event_initialized(&c->outevent))
+		event_del(&c->outevent);
+
+	if(c->socket > 0)
+		closesocket(c->socket);
 
 	free(c);
 }
 
 void connection_add(connection_t *c) {
-	avl_insert(connection_tree, c);
+	splay_insert(connection_tree, c);
 }
 
 void connection_del(connection_t *c) {
-	avl_delete(connection_tree, c);
+	splay_delete(connection_tree, c);
 }
 
-void dump_connections(void) {
+bool dump_connections(connection_t *cdump) {
-	avl_node_t *node;
+	splay_node_t *node;
 	connection_t *c;
 
-	logger(LOG_DEBUG, "Connections:");
-
 	for(node = connection_tree->head; node; node = node->next) {
 		c = node->data;
-		logger(LOG_DEBUG, " %s at %s options %x socket %d status %04x outbuf %d/%d/%d",
+		send_request(cdump, "%d %d %s at %s options %x socket %d status %04x",
-		       c->name, c->hostname, c->options, c->socket, bitfield_to_int(&c->status, sizeof(c->status)),
+				CONTROL, REQ_DUMP_CONNECTIONS,
-		       c->outbufsize, c->outbufstart, c->outbuflen);
+				c->name, c->hostname, c->options, c->socket,
+				bitfield_to_int(&c->status, sizeof c->status));
 	}
 
-	logger(LOG_DEBUG, "End of connections.");
+	return send_request(cdump, "%d %d", CONTROL, REQ_DUMP_CONNECTIONS);
 }

src/connection.h

@@ -1,9 +1,6 @@
-#ifndef TINC_CONNECTION_H
-#define TINC_CONNECTION_H
-
 /*
     connection.h -- header for connection.c
-    Copyright (C) 2000-2016 Guus Sliepen <guus@tinc-vpn.org>,
+    Copyright (C) 2000-2010 Guus Sliepen <guus@tinc-vpn.org>,
                   2000-2005 Ivo Timmermans
 
     This program is free software; you can redistribute it and/or modify
@@ -21,10 +18,14 @@
     51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 */
 
-#include <openssl/rsa.h>
+#ifndef __TINC_CONNECTION_H__
-#include <openssl/evp.h>
+#define __TINC_CONNECTION_H__
 
-#include "avl_tree.h"
+#include "buffer.h"
+#include "cipher.h"
+#include "digest.h"
+#include "rsa.h"
+#include "splay_tree.h"
 
 #define OPTION_INDIRECT		0x0001
 #define OPTION_TCPONLY		0x0002
@@ -32,20 +33,22 @@
 #define OPTION_CLAMP_MSS	0x0008
 
 typedef struct connection_status_t {
-	unsigned int pinged: 1;         /* sent ping */
+		unsigned int pinged:1;			/* sent ping */
-	unsigned int active: 1;         /* 1 if active.. */
+		unsigned int active:1;			/* 1 if active.. */
-	unsigned int connecting: 1;     /* 1 if we are waiting for a non-blocking connect() to finish */
+		unsigned int connecting:1;		/* 1 if we are waiting for a non-blocking connect() to finish */
-	unsigned int unused_termreq: 1; /* the termination of this connection was requested */
+		unsigned int termreq:1;			/* the termination of this connection was requested */
-	unsigned int remove: 1;         /* Set to 1 if you want this connection removed */
+		unsigned int remove_unused:1;		/* Set to 1 if you want this connection removed */
-	unsigned int timeout: 1;        /* 1 if gotten timeout */
+		unsigned int timeout_unused:1;		/* 1 if gotten timeout */
-	unsigned int encryptout: 1;     /* 1 if we can encrypt outgoing traffic */
+		unsigned int encryptout:1;		/* 1 if we can encrypt outgoing traffic */
-	unsigned int decryptin: 1;      /* 1 if we have to decrypt incoming traffic */
+		unsigned int decryptin:1;		/* 1 if we have to decrypt incoming traffic */
-	unsigned int mst: 1;            /* 1 if this connection is part of a minimum spanning tree */
+		unsigned int mst:1;			/* 1 if this connection is part of a minimum spanning tree */
-	unsigned int proxy_passed: 1;   /* 1 if we are connecting via a proxy and we have finished talking with it */
+		unsigned int control:1;
-	unsigned int tarpit: 1;         /* 1 if the connection should be added to the tarpit */
+		unsigned int pcap:1;
-	unsigned int unused: 21;
+		unsigned int unused:21;
 } connection_status_t;
 
+#include "ecdh.h"
+#include "ecdsa.h"
 #include "edge.h"
 #include "net.h"
 #include "node.h"
@@ -55,7 +58,8 @@ typedef struct connection_t {
 
 	union sockaddr_t address;			/* his real (internet) ip */
 	char *hostname;				/* the hostname of its real ip */
-	int protocol_version;           /* used protocol */
+	int protocol_major;		/* used protocol */
+	int protocol_minor;		/* used protocol */
 
 	int socket;					/* socket used for this connection */
 	uint32_t options;			/* options for this connection */
@@ -67,53 +71,42 @@ typedef struct connection_t {
 	struct node_t *node;		/* node associated with the other end */
 	struct edge_t *edge;		/* edge associated with this connection */
 
-	RSA *rsa_key;                   /* his public/private key */
+	rsa_t rsa;			/* his public RSA key */
-	const EVP_CIPHER *incipher;     /* Cipher he will use to send data to us */
+	ecdsa_t ecdsa;			/* his public ECDSA key */
-	const EVP_CIPHER *outcipher;    /* Cipher we will use to send data to him */
+	ecdsa_t ecdh;			/* state for ECDH key exchange */
-	EVP_CIPHER_CTX *inctx;          /* Context of encrypted meta data that will come from him to us */
+	cipher_t incipher;		/* Cipher he will use to send data to us */
-	EVP_CIPHER_CTX *outctx;         /* Context of encrypted meta data that will be sent from us to him */
+	cipher_t outcipher;		/* Cipher we will use to send data to him */
-	uint64_t inbudget;              /* Encrypted bytes send budget */
+	digest_t indigest;
-	uint64_t outbudget;             /* Encrypted bytes receive budget */
+	digest_t outdigest;
-	char *inkey;                    /* His symmetric meta key + iv */
+
-	char *outkey;                   /* Our symmetric meta key + iv */
-	int inkeylength;                /* Length of his key + iv */
-	int outkeylength;               /* Length of our key + iv */
-	const EVP_MD *indigest;
-	const EVP_MD *outdigest;
 	int inmaclength;
 	int outmaclength;
 	int incompression;
 	int outcompression;
-	char *mychallenge;              /* challenge we received from him */
-	char *hischallenge;             /* challenge we sent to him */
 
-	char buffer[MAXBUFSIZE];        /* metadata input buffer */
+	char *hischallenge;		/* The challenge we sent to him */
-	int buflen;                     /* bytes read into buffer */
+
-	int reqlen;                     /* length of incoming request */
+	struct buffer_t inbuf;
-	length_t tcplen;                /* length of incoming TCPpacket */
+	struct buffer_t outbuf;
+	struct event inevent;				/* input event on this metadata connection */
+	struct event outevent;				/* output event on this metadata connection */
+	int tcplen;					/* length of incoming TCPpacket */
 	int allow_request;			/* defined if there's only one request possible */
 
-	char *outbuf;                   /* metadata output buffer */
-	int outbufstart;                /* index of first meaningful byte in output buffer */
-	int outbuflen;                  /* number of meaningful bytes in output buffer */
-	int outbufsize;                 /* number of bytes allocated to output buffer */
-
 	time_t last_ping_time;		/* last time we saw some activity from the other end or pinged them */
-	time_t last_flushed_time;       /* last time buffer was empty. Only meaningful if outbuflen > 0 */
 
-	avl_tree_t *config_tree;        /* Pointer to configuration tree belonging to him */
+	splay_tree_t *config_tree;	/* Pointer to configuration tree belonging to him */
 } connection_t;
 
-extern avl_tree_t *connection_tree;
+extern splay_tree_t *connection_tree;
-extern connection_t *everyone;
+extern connection_t *broadcast;
 
 extern void init_connections(void);
 extern void exit_connections(void);
-extern connection_t *new_connection(void) __attribute__((__malloc__));
+extern connection_t *new_connection(void) __attribute__ ((__malloc__));
-extern void free_connection(connection_t *c);
+extern void free_connection(connection_t *);
-extern void free_connection_partially(connection_t *c);
+extern void connection_add(connection_t *);
-extern void connection_add(connection_t *c);
+extern void connection_del(connection_t *);
-extern void connection_del(connection_t *c);
+extern bool dump_connections(struct connection_t *);
-extern void dump_connections(void);
 
-#endif
+#endif							/* __TINC_CONNECTION_H__ */

src/control.c

@@ -0,0 +1,182 @@
+/*
+    control.c -- Control socket handling.
+    Copyright (C) 2007 Guus Sliepen <guus@tinc-vpn.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License along
+    with this program; if not, write to the Free Software Foundation, Inc.,
+    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+*/
+
+#include "system.h"
+#include "crypto.h"
+#include "conf.h"
+#include "control.h"
+#include "control_common.h"
+#include "graph.h"
+#include "logger.h"
+#include "meta.h"
+#include "net.h"
+#include "netutl.h"
+#include "protocol.h"
+#include "route.h"
+#include "splay_tree.h"
+#include "utils.h"
+#include "xalloc.h"
+
+char controlcookie[65];
+extern char *pidfilename;
+
+static bool control_return(connection_t *c, int type, int error) {
+	return send_request(c, "%d %d %d", CONTROL, type, error);
+}
+
+static bool control_ok(connection_t *c, int type) {
+	return control_return(c, type, 0);
+}
+
+bool control_h(connection_t *c, char *request) {
+	int type;
+
+	if(!c->status.control || c->allow_request != CONTROL) {
+		logger(LOG_ERR, "Unauthorized control request from %s (%s)", c->name, c->hostname);
+		return false;
+	}
+
+	if(sscanf(request, "%*d %d", &type) != 1) {
+		logger(LOG_ERR, "Got bad %s from %s (%s)", "CONTROL", c->name, c->hostname);
+		return false;
+	}
+
+	switch (type) {
+		case REQ_STOP:
+			event_loopexit(NULL);
+			return control_ok(c, REQ_STOP);
+
+		case REQ_DUMP_NODES:
+			return dump_nodes(c);
+			
+		case REQ_DUMP_EDGES:
+			return dump_edges(c);
+
+		case REQ_DUMP_SUBNETS:
+			return dump_subnets(c);
+
+		case REQ_DUMP_CONNECTIONS:
+			return dump_connections(c);
+
+		case REQ_PURGE:
+			purge();
+			return control_ok(c, REQ_PURGE);
+
+		case REQ_SET_DEBUG: {
+			int new_level;
+			if(sscanf(request, "%*d %*d %d", &new_level) != 1)
+				return false;
+			send_request(c, "%d %d %d", CONTROL, REQ_SET_DEBUG, debug_level);
+			if(new_level >= 0)
+				debug_level = new_level;
+			return true;
+		}
+
+		case REQ_RETRY:
+			retry();
+			return control_ok(c, REQ_RETRY);
+
+		case REQ_RELOAD:
+			logger(LOG_NOTICE, "Got '%s' command", "reload");
+			int result = reload_configuration();
+			return control_return(c, REQ_RELOAD, result);
+
+		case REQ_DISCONNECT: {
+			char name[MAX_STRING_SIZE];
+			connection_t *other;
+			splay_node_t *node, *next;
+			bool found = false;
+
+			if(sscanf(request, "%*d %*d " MAX_STRING, name) != 1)
+				return control_return(c, REQ_DISCONNECT, -1);
+
+			for(node = connection_tree->head; node; node = next) {
+				next = node->next;
+				other = node->data;
+				if(strcmp(other->name, name))
+					continue;
+				terminate_connection(other, other->status.active);
+				found = true;
+			}
+
+			return control_return(c, REQ_DISCONNECT, found ? 0 : -2);
+		}
+
+		case REQ_DUMP_TRAFFIC:
+			return dump_traffic(c);
+
+		case REQ_PCAP:
+			c->status.pcap = true;
+			pcap = true;
+			return true;
+
+		default:
+			return send_request(c, "%d %d", CONTROL, REQ_INVALID);
+	}
+}
+
+bool init_control(void) {
+	randomize(controlcookie, sizeof controlcookie / 2);
+	bin2hex(controlcookie, controlcookie, sizeof controlcookie / 2);
+
+	FILE *f = fopen(pidfilename, "w");
+	if(!f) {
+		logger(LOG_ERR, "Cannot write control socket cookie file %s: %s", pidfilename, strerror(errno));
+		return false;
+	}
+
+#ifdef HAVE_FCHMOD
+	fchmod(fileno(f), 0600);
+#else
+	chmod(pidfilename, 0600);
+#endif
+	// Get the address and port of the first listening socket
+
+	char *localhost = NULL;
+	sockaddr_t sa;
+	socklen_t len = sizeof sa;
+
+	// Make sure we have a valid address, and map 0.0.0.0 and :: to 127.0.0.1 and ::1.
+
+	if(getsockname(listen_socket[0].tcp, (struct sockaddr *)&sa, &len)) {
+		xasprintf(&localhost, "127.0.0.1 port %d", myport);
+	} else {
+		if(sa.sa.sa_family == AF_INET) {
+			if(sa.in.sin_addr.s_addr == 0)
+				sa.in.sin_addr.s_addr = htonl(0x7f000001);
+		} else if(sa.sa.sa_family == AF_INET6) {
+			static const uint8_t zero[16] = {0};
+			if(!memcmp(sa.in6.sin6_addr.s6_addr, zero, sizeof zero))
+				sa.in6.sin6_addr.s6_addr[15] = 1;
+		}
+
+		localhost = sockaddr2hostname(&sa);
+	}
+
+	fprintf(f, "%d %s %s\n", (int)getpid(), controlcookie, localhost);
+
+	free(localhost);
+	fclose(f);
+
+	return true;
+}
+
+void exit_control(void) {
+	unlink(pidfilename);
+}

src/control.h

@@ -0,0 +1,27 @@
+/*
+    control.h -- header for control.c.
+    Copyright (C) 2007 Guus Sliepen <guus@tinc-vpn.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License along
+    with this program; if not, write to the Free Software Foundation, Inc.,
+    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+*/
+
+#ifndef __TINC_CONTROL_H__
+#define __TINC_CONTROL_H__
+
+extern bool init_control();
+extern void exit_control();
+extern char controlcookie[];
+
+#endif

src/control_common.h

@@ -0,0 +1,46 @@
+/*
+    control_protocol.h -- control socket protocol.
+    Copyright (C) 2007 Scott Lamb <slamb@slamb.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License along
+    with this program; if not, write to the Free Software Foundation, Inc.,
+    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+*/
+
+#ifndef __TINC_CONTROL_PROTOCOL_H__
+#define __TINC_CONTROL_PROTOCOL_H__
+
+#include "protocol.h"
+
+enum request_type {
+	REQ_INVALID = -1,
+	REQ_STOP = 0,
+	REQ_RELOAD,
+	REQ_RESTART,
+	REQ_DUMP_NODES,
+	REQ_DUMP_EDGES,
+	REQ_DUMP_SUBNETS,
+	REQ_DUMP_CONNECTIONS,
+	REQ_DUMP_GRAPH,
+	REQ_PURGE,
+	REQ_SET_DEBUG,
+	REQ_RETRY,
+	REQ_CONNECT,
+	REQ_DISCONNECT,
+	REQ_DUMP_TRAFFIC,
+	REQ_PCAP,
+};
+
+#define TINC_CTL_VERSION_CURRENT 0
+
+#endif

src/cygwin/device.c

@@ -1,7 +1,7 @@
 /*
     device.c -- Interaction with Windows tap driver in a Cygwin environment
     Copyright (C) 2002-2005 Ivo Timmermans,
-                  2002-2016 Guus Sliepen <guus@tinc-vpn.org>
+                  2002-2009 Guus Sliepen <guus@tinc-vpn.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -18,26 +18,26 @@
     51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 */
 
-#include "../system.h"
+#include "system.h"
-#include "../net.h"
 
 #include <w32api/windows.h>
 #include <w32api/winioctl.h>
 
-#include "../conf.h"
+#include "conf.h"
-#include "../device.h"
+#include "device.h"
-#include "../logger.h"
+#include "logger.h"
-#include "../route.h"
+#include "net.h"
-#include "../utils.h"
+#include "route.h"
-#include "../xalloc.h"
+#include "utils.h"
+#include "xalloc.h"
 
-#include "../mingw/common.h"
+#include "mingw/common.h"
 
 int device_fd = -1;
 static HANDLE device_handle = INVALID_HANDLE_VALUE;
 char *device = NULL;
 char *iface = NULL;
-static const char *device_info = "Windows tap device";
+static char *device_info = NULL;
 
 static uint64_t device_total_in = 0;
 static uint64_t device_total_out = 0;
@@ -45,7 +45,7 @@ static uint64_t device_total_out = 0;
 static pid_t reader_pid;
 static int sp[2];
 
-static bool setup_device(void) {
+bool setup_device(void) {
 	HKEY key, key2;
 	int i, err;
 
@@ -61,10 +61,6 @@ static bool setup_device(void) {
 	get_config_string(lookup_config(config_tree, "Device"), &device);
 	get_config_string(lookup_config(config_tree, "Interface"), &iface);
 
-	if(device && iface) {
-		logger(LOG_WARNING, "Warning: both Device and Interface specified, results may not be as expected");
-	}
-
 	/* Open registry and look for network adapters */
 
 	if(RegOpenKeyEx(HKEY_LOCAL_MACHINE, NETWORK_CONNECTIONS_KEY, 0, KEY_READ, &key)) {
@@ -72,51 +68,44 @@ static bool setup_device(void) {
 		return false;
 	}
 
-	for(i = 0; ; i++) {
+	for (i = 0; ; i++) {
-		len = sizeof(adapterid);
+		len = sizeof adapterid;
-
+		if(RegEnumKeyEx(key, i, adapterid, &len, 0, 0, 0, NULL))
-		if(RegEnumKeyEx(key, i, adapterid, &len, 0, 0, 0, NULL)) {
 			break;
-		}
 
 		/* Find out more about this adapter */
 
-		snprintf(regpath, sizeof(regpath), "%s\\%s\\Connection", NETWORK_CONNECTIONS_KEY, adapterid);
+		snprintf(regpath, sizeof regpath, "%s\\%s\\Connection", NETWORK_CONNECTIONS_KEY, adapterid);
 
-		if(RegOpenKeyEx(HKEY_LOCAL_MACHINE, regpath, 0, KEY_READ, &key2)) {
+                if(RegOpenKeyEx(HKEY_LOCAL_MACHINE, regpath, 0, KEY_READ, &key2))
 			continue;
-		}
 
-		len = sizeof(adaptername);
+		len = sizeof adaptername;
 		err = RegQueryValueEx(key2, "Name", 0, 0, adaptername, &len);
 
 		RegCloseKey(key2);
 
-		if(err) {
+		if(err)
 			continue;
-		}
 
 		if(device) {
 			if(!strcmp(device, adapterid)) {
 				found = true;
 				break;
-			} else {
+			} else
 				continue;
 		}
-		}
 
 		if(iface) {
 			if(!strcmp(iface, adaptername)) {
 				found = true;
 				break;
-			} else {
+			} else
 				continue;
 		}
-		}
 
-		snprintf(tapname, sizeof(tapname), USERMODEDEVICEDIR "%s" TAPSUFFIX, adapterid);
+		snprintf(tapname, sizeof tapname, USERMODEDEVICEDIR "%s" TAPSUFFIX, adapterid);
 		device_handle = CreateFile(tapname, GENERIC_WRITE | GENERIC_READ, 0, 0, OPEN_EXISTING, FILE_ATTRIBUTE_SYSTEM, 0);
-
 		if(device_handle != INVALID_HANDLE_VALUE) {
 			CloseHandle(device_handle);
 			found = true;
@@ -131,15 +120,13 @@ static bool setup_device(void) {
 		return false;
 	}
 
-	if(!device) {
+	if(!device)
 		device = xstrdup(adapterid);
-	}
 
-	if(!iface) {
+	if(!iface)
 		iface = xstrdup(adaptername);
-	}
 
-	snprintf(tapname, sizeof(tapname), USERMODEDEVICEDIR "%s" TAPSUFFIX, device);
+	snprintf(tapname, sizeof tapname, USERMODEDEVICEDIR "%s" TAPSUFFIX, device);
 	
 	/* Now we are going to open this device twice: once for reading and once for writing.
 	   We do this because apparently it isn't possible to check for activity in the select() loop.
@@ -152,7 +139,7 @@ static bool setup_device(void) {
 
 	/* The parent opens the tap device for writing. */
 	
-	device_handle = CreateFile(tapname, GENERIC_WRITE,  FILE_SHARE_READ,  0,  OPEN_EXISTING, FILE_ATTRIBUTE_SYSTEM, 0);
+	device_handle = CreateFile(tapname, GENERIC_WRITE,  FILE_SHARE_READ,  0,  OPEN_EXISTING, FILE_ATTRIBUTE_SYSTEM , 0);
 	
 	if(device_handle == INVALID_HANDLE_VALUE) {
 		logger(LOG_ERR, "Could not open Windows tap device %s (%s) for writing: %s", device, iface, winerror(GetLastError()));
@@ -163,7 +150,7 @@ static bool setup_device(void) {
 
 	/* Get MAC address from tap device */
 
-	if(!DeviceIoControl(device_handle, TAP_IOCTL_GET_MAC, mymac.x, sizeof(mymac.x), mymac.x, sizeof(mymac.x), &len, 0)) {
+	if(!DeviceIoControl(device_handle, TAP_IOCTL_GET_MAC, mymac.x, sizeof mymac.x, mymac.x, sizeof mymac.x, &len, 0)) {
 		logger(LOG_ERR, "Could not get MAC address from Windows tap device %s (%s): %s", device, iface, winerror(GetLastError()));
 		return false;
 	}
@@ -186,7 +173,7 @@ static bool setup_device(void) {
 		   It passes everything it reads to the socket. */
 	
 		char buf[MTU];
-		long lenin;
+		long inlen;
 
 		CloseHandle(device_handle);
 
@@ -209,24 +196,25 @@ static bool setup_device(void) {
 		/* Pass packets */
 
 		for(;;) {
-			ReadFile(device_handle, buf, MTU, &lenin, NULL);
+			ReadFile(device_handle, buf, MTU, &inlen, NULL);
-			write(sp[1], buf, lenin);
+			write(sp[1], buf, inlen);
 		}
 	}
 
 	read(device_fd, &gelukt, 1);
-
 	if(gelukt != 1) {
 		logger(LOG_DEBUG, "Tap reader failed!");
 		return false;
 	}
 
+	device_info = "Windows tap device";
+
 	logger(LOG_INFO, "%s (%s) is a %s", device, iface, device_info);
 
 	return true;
 }
 
-static void close_device(void) {
+void close_device(void) {
 	close(sp[0]);
 	close(sp[1]);
 	CloseHandle(device_handle);
@@ -237,16 +225,16 @@ static void close_device(void) {
 	free(iface);
 }
 
-static bool read_packet(vpn_packet_t *packet) {
+bool read_packet(vpn_packet_t *packet) {
-	int lenin;
+	int inlen;
 
-	if((lenin = read(sp[0], packet->data, MTU)) <= 0) {
+	if((inlen = read(sp[0], packet->data, MTU)) <= 0) {
 		logger(LOG_ERR, "Error while reading from %s %s: %s", device_info,
 			   device, strerror(errno));
 		return false;
 	}
 	
-	packet->len = lenin;
+	packet->len = inlen;
 
 	device_total_in += packet->len;
 
@@ -256,13 +244,13 @@ static bool read_packet(vpn_packet_t *packet) {
 	return true;
 }
 
-static bool write_packet(vpn_packet_t *packet) {
+bool write_packet(vpn_packet_t *packet) {
-	long lenout;
+	long outlen;
 
 	ifdebug(TRAFFIC) logger(LOG_DEBUG, "Writing packet of %d bytes to %s",
 			   packet->len, device_info);
 
-	if(!WriteFile(device_handle, packet->data, packet->len, &lenout, NULL)) {
+	if(!WriteFile (device_handle, packet->data, packet->len, &outlen, NULL)) {
 		logger(LOG_ERR, "Error while writing to %s %s: %s", device_info, device, winerror(GetLastError()));
 		return false;
 	}
@@ -272,16 +260,8 @@ static bool write_packet(vpn_packet_t *packet) {
 	return true;
 }
 
-static void dump_device_stats(void) {
+void dump_device_stats(void) {
 	logger(LOG_DEBUG, "Statistics for %s %s:", device_info, device);
 	logger(LOG_DEBUG, " total bytes in:  %10"PRIu64, device_total_in);
 	logger(LOG_DEBUG, " total bytes out: %10"PRIu64, device_total_out);
 }
-
-const devops_t os_devops = {
-	.setup = setup_device,
-	.close = close_device,
-	.read = read_packet,
-	.write = write_packet,
-	.dump_stats = dump_device_stats,
-};

src/device.h

@@ -1,10 +1,7 @@
-#ifndef TINC_DEVICE_H
-#define TINC_DEVICE_H
-
 /*
-    device.h -- generic header for device.c
+    net.h -- generic header for device.c
     Copyright (C) 2001-2005 Ivo Timmermans
-                  2001-2012 Guus Sliepen <guus@tinc-vpn.org>
+                  2001-2006 Guus Sliepen <guus@tinc-vpn.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -21,27 +18,24 @@
     51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 */
 
+#ifndef __TINC_DEVICE_H__
+#define __TINC_DEVICE_H__
+
 #include "net.h"
 
 extern int device_fd;
 extern char *device;
-
 extern char *iface;
 
-typedef struct devops_t {
+extern uint64_t device_in_packets;
-	bool (*setup)(void);
+extern uint64_t device_in_bytes;
-	void (*close)(void);
+extern uint64_t device_out_packets;
-	bool (*read)(struct vpn_packet_t *packet);
+extern uint64_t device_out_bytes;
-	bool (*write)(struct vpn_packet_t *packet);
-	void (*dump_stats)(void);
-} devops_t;
 
-extern const devops_t os_devops;
+extern bool setup_device(void);
-extern const devops_t dummy_devops;
+extern void close_device(void);
-extern const devops_t raw_socket_devops;
+extern bool read_packet(struct vpn_packet_t *);
-extern const devops_t multicast_devops;
+extern bool write_packet(struct vpn_packet_t *);
-extern const devops_t uml_devops;
+extern void dump_device_stats(void);
-extern const devops_t vde_devops;
-extern devops_t devops;
 
-#endif
+#endif							/* __TINC_DEVICE_H__ */

src/dropin.c

@@ -1,7 +1,7 @@
 /*
     dropin.c -- a set of drop-in replacements for libc functions
     Copyright (C) 2000-2005 Ivo Timmermans,
-                  2000-2016 Guus Sliepen <guus@tinc-vpn.org>
+                  2000-2011 Guus Sliepen <guus@tinc-vpn.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -50,9 +50,8 @@ int daemon(int nochdir, int noclose) {
 	}
 
 	/* If we are the parent, terminate */
-	if(pid) {
+	if(pid)
 		exit(0);
-	}
 
 	/* Detach by becoming the new process group leader */
 	if(setsid() < 0) {
@@ -87,6 +86,40 @@ int daemon(int nochdir, int noclose) {
 }
 #endif
 
+#ifndef HAVE_GET_CURRENT_DIR_NAME
+/*
+  Replacement for the GNU get_current_dir_name function:
+
+  get_current_dir_name will malloc(3) an array big enough to hold the
+  current directory name.  If the environment variable PWD is set, and
+  its value is correct, then that value will be returned.
+*/
+char *get_current_dir_name(void) {
+	size_t size;
+	char *buf;
+	char *r;
+
+	/* Start with 100 bytes.  If this turns out to be insufficient to
+	   contain the working directory, double the size.  */
+	size = 100;
+	buf = xmalloc(size);
+
+	errno = 0;					/* Success */
+	r = getcwd(buf, size);
+
+	/* getcwd returns NULL and sets errno to ERANGE if the bufferspace
+	   is insufficient to contain the entire working directory.  */
+	while(r == NULL && errno == ERANGE) {
+		free(buf);
+		size <<= 1;				/* double the size */
+		buf = xmalloc(size);
+		r = getcwd(buf, size);
+	}
+
+	return buf;
+}
+#endif
+
 #ifndef HAVE_ASPRINTF
 int asprintf(char **buf, const char *fmt, ...) {
 	int result;
@@ -107,12 +140,10 @@ int vasprintf(char **buf, const char *fmt, va_list ap) {
 
 	va_copy(aq, ap);
 	status = vsnprintf(*buf, len, fmt, aq);
-	buf[len - 1] = 0;
 	va_end(aq);
 
-	if(status >= 0) {
+	if(status >= 0)
 		*buf = xrealloc(*buf, status + 1);
-	}
 
 	if(status > len - 1) {
 		len = status;

src/dropin.h

@@ -1,6 +1,3 @@
-#ifndef TINC_DROPIN_H
-#define TINC_DROPIN_H
-
 /*
     dropin.h -- header file for dropin.c
     Copyright (C) 2000-2005 Ivo Timmermans,
@@ -21,11 +18,14 @@
     51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 */
 
+#ifndef __DROPIN_H__
+#define __DROPIN_H__
+
 #include "fake-getaddrinfo.h"
 #include "fake-getnameinfo.h"
 
 #ifndef HAVE_DAEMON
-extern int daemon(int nochdir, int noclose);
+extern int daemon(int, int);
 #endif
 
 #ifndef HAVE_GET_CURRENT_DIR_NAME
@@ -33,16 +33,16 @@ extern char *get_current_dir_name(void);
 #endif
 
 #ifndef HAVE_ASPRINTF
-extern int asprintf(char **buf, const char *fmt, ...);
+extern int asprintf(char **, const char *, ...);
-extern int vasprintf(char **buf, const char *fmt, va_list ap);
+extern int vasprintf(char **, const char *, va_list ap);
 #endif
 
 #ifndef HAVE_GETTIMEOFDAY
-extern int gettimeofday(struct timeval *tv, void *tz);
+extern int gettimeofday(struct timeval *, void *);
 #endif
 
 #ifndef HAVE_USLEEP
 extern int usleep(long long usec);
 #endif
 
-#endif
+#endif							/* __DROPIN_H__ */

src/dummy_device.c

@@ -1,66 +0,0 @@
-/*
-    device.c -- Dummy device
-    Copyright (C) 2011 Guus Sliepen <guus@tinc-vpn.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License along
-    with this program; if not, write to the Free Software Foundation, Inc.,
-    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-*/
-
-#include "system.h"
-
-#include "device.h"
-#include "logger.h"
-#include "net.h"
-#include "xalloc.h"
-
-static const char *device_info = "dummy device";
-
-static uint64_t device_total_in = 0;
-static uint64_t device_total_out = 0;
-
-static bool setup_device(void) {
-	device = xstrdup("dummy");
-	iface = xstrdup("dummy");
-	logger(LOG_INFO, "%s (%s) is a %s", device, iface, device_info);
-	return true;
-}
-
-static void close_device(void) {
-	free(device);
-	free(iface);
-}
-
-static bool read_packet(vpn_packet_t *packet) {
-	(void)packet;
-	return false;
-}
-
-static bool write_packet(vpn_packet_t *packet) {
-	device_total_out += packet->len;
-	return true;
-}
-
-static void dump_device_stats(void) {
-	logger(LOG_DEBUG, "Statistics for %s %s:", device_info, device);
-	logger(LOG_DEBUG, " total bytes in:  %10"PRIu64, device_total_in);
-	logger(LOG_DEBUG, " total bytes out: %10"PRIu64, device_total_out);
-}
-
-const devops_t dummy_devops = {
-	.setup = setup_device,
-	.close = close_device,
-	.read = read_packet,
-	.write = write_packet,
-	.dump_stats = dump_device_stats,
-};

src/edge.c

@@ -20,7 +20,8 @@
 
 #include "system.h"
 
-#include "avl_tree.h"
+#include "splay_tree.h"
+#include "control_common.h"
 #include "edge.h"
 #include "logger.h"
 #include "netutl.h"
@@ -28,7 +29,7 @@
 #include "utils.h"
 #include "xalloc.h"
 
-avl_tree_t *edge_weight_tree;   /* Tree with all edges, sorted on weight */
+splay_tree_t *edge_weight_tree;	/* Tree with all edges, sorted on weight */
 
 static int edge_compare(const edge_t *a, const edge_t *b) {
 	return strcmp(a->to->name, b->to->name);
@@ -39,33 +40,31 @@ static int edge_weight_compare(const edge_t *a, const edge_t *b) {
 
 	result = a->weight - b->weight;
 
-	if(result) {
+	if(result)
 		return result;
-	}
 
 	result = strcmp(a->from->name, b->from->name);
 
-	if(result) {
+	if(result)
 		return result;
-	}
 
 	return strcmp(a->to->name, b->to->name);
 }
 
 void init_edges(void) {
-	edge_weight_tree = avl_alloc_tree((avl_compare_t) edge_weight_compare, NULL);
+	edge_weight_tree = splay_alloc_tree((splay_compare_t) edge_weight_compare, NULL);
 }
 
-avl_tree_t *new_edge_tree(void) {
+splay_tree_t *new_edge_tree(void) {
-	return avl_alloc_tree((avl_compare_t) edge_compare, (avl_action_t) free_edge);
+	return splay_alloc_tree((splay_compare_t) edge_compare, (splay_action_t) free_edge);
 }
 
-void free_edge_tree(avl_tree_t *edge_tree) {
+void free_edge_tree(splay_tree_t *edge_tree) {
-	avl_delete_tree(edge_tree);
+	splay_delete_tree(edge_tree);
 }
 
 void exit_edges(void) {
-	avl_delete_tree(edge_weight_tree);
+	splay_delete_tree(edge_weight_tree);
 }
 
 /* Creation and deletion of connection elements */
@@ -81,23 +80,21 @@ void free_edge(edge_t *e) {
 }
 
 void edge_add(edge_t *e) {
-	avl_insert(edge_weight_tree, e);
+	splay_insert(edge_weight_tree, e);
-	avl_insert(e->from->edge_tree, e);
+	splay_insert(e->from->edge_tree, e);
 
 	e->reverse = lookup_edge(e->to, e->from);
 
-	if(e->reverse) {
+	if(e->reverse)
 		e->reverse->reverse = e;
-	}
 }
 
 void edge_del(edge_t *e) {
-	if(e->reverse) {
+	if(e->reverse)
 		e->reverse->reverse = NULL;
-	}
 
-	avl_delete(edge_weight_tree, e);
+	splay_delete(edge_weight_tree, e);
-	avl_delete(e->from->edge_tree, e);
+	splay_delete(e->from->edge_tree, e);
 }
 
 edge_t *lookup_edge(node_t *from, node_t *to) {
@@ -106,28 +103,27 @@ edge_t *lookup_edge(node_t *from, node_t *to) {
 	v.from = from;
 	v.to = to;
 
-	return avl_search(from->edge_tree, &v);
+	return splay_search(from->edge_tree, &v);
 }
 
-void dump_edges(void) {
+bool dump_edges(connection_t *c) {
-	avl_node_t *node, *node2;
+	splay_node_t *node, *node2;
 	node_t *n;
 	edge_t *e;
 	char *address;
 
-	logger(LOG_DEBUG, "Edges:");
-
 	for(node = node_tree->head; node; node = node->next) {
 		n = node->data;
-
 		for(node2 = n->edge_tree->head; node2; node2 = node2->next) {
 			e = node2->data;
 			address = sockaddr2hostname(&e->address);
-			logger(LOG_DEBUG, " %s to %s at %s options %x weight %d",
+			send_request(c, "%d %d %s to %s at %s options %x weight %d",
-			       e->from->name, e->to->name, address, e->options, e->weight);
+					CONTROL, REQ_DUMP_EDGES,
+					e->from->name, e->to->name, address,
+					e->options, e->weight);
 			free(address);
 		}
 	}
 
-	logger(LOG_DEBUG, "End of edges.");
+	return send_request(c, "%d %d", CONTROL, REQ_DUMP_EDGES);
 }

src/edge.h

@@ -1,6 +1,3 @@
-#ifndef TINC_EDGE_H
-#define TINC_EDGE_H
-
 /*
     edge.h -- header for edge.c
     Copyright (C) 2001-2006 Guus Sliepen <guus@tinc-vpn.org>,
@@ -21,7 +18,10 @@
     51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 */
 
-#include "avl_tree.h"
+#ifndef __TINC_EDGE_H__
+#define __TINC_EDGE_H__
+
+#include "splay_tree.h"
 #include "connection.h"
 #include "net.h"
 #include "node.h"
@@ -38,17 +38,17 @@ typedef struct edge_t {
 	struct edge_t *reverse;		/* edge in the opposite direction, if available */
 } edge_t;
 
-extern avl_tree_t *edge_weight_tree;     /* Tree with all known edges sorted on weight */
+extern splay_tree_t *edge_weight_tree;	/* Tree with all known edges sorted on weight */
 
 extern void init_edges(void);
 extern void exit_edges(void);
-extern edge_t *new_edge(void) __attribute__((__malloc__));
+extern edge_t *new_edge(void) __attribute__ ((__malloc__));
-extern void free_edge(edge_t *e);
+extern void free_edge(edge_t *);
-extern avl_tree_t *new_edge_tree(void) __attribute__((__malloc__));
+extern splay_tree_t *new_edge_tree(void) __attribute__ ((__malloc__));
-extern void free_edge_tree(avl_tree_t *edge_tree);
+extern void free_edge_tree(splay_tree_t *);
-extern void edge_add(edge_t *e);
+extern void edge_add(edge_t *);
-extern void edge_del(edge_t *e);
+extern void edge_del(edge_t *);
-extern edge_t *lookup_edge(struct node_t *from, struct node_t *to);
+extern edge_t *lookup_edge(struct node_t *, struct node_t *);
-extern void dump_edges(void);
+extern bool dump_edges(struct connection_t *);
 
-#endif
+#endif							/* __TINC_EDGE_H__ */

src/ethernet.h

@@ -1,6 +1,3 @@
-#ifndef TINC_ETHERNET_H
-#define TINC_ETHERNET_H
-
 /*
     ethernet.h -- missing Ethernet related definitions
     Copyright (C) 2005 Ivo Timmermans
@@ -21,6 +18,9 @@
     51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 */
 
+#ifndef __TINC_ETHERNET_H__
+#define __TINC_ETHERNET_H__
+
 #ifndef ETH_ALEN
 #define ETH_ALEN 6
 #endif
@@ -41,16 +41,12 @@
 #define ETH_P_IPV6 0x86DD
 #endif
 
-#ifndef ETH_P_8021Q
-#define ETH_P_8021Q 0x8100
-#endif
-
 #ifndef HAVE_STRUCT_ETHER_HEADER
 struct ether_header {
 	uint8_t ether_dhost[ETH_ALEN];
 	uint8_t ether_shost[ETH_ALEN];
 	uint16_t ether_type;
-} __attribute__((__packed__));
+} __attribute__ ((__packed__));
 #endif
 
 #ifndef HAVE_STRUCT_ARPHDR
@@ -60,7 +56,7 @@ struct arphdr {
 	uint8_t ar_hln;
 	uint8_t ar_pln; 
 	uint16_t ar_op; 
-} __attribute__((__packed__));
+} __attribute__ ((__packed__));
 
 #define ARPOP_REQUEST 1 
 #define ARPOP_REPLY 2 
@@ -78,7 +74,7 @@ struct  ether_arp {
 	uint8_t arp_spa[4];
 	uint8_t arp_tha[ETH_ALEN];
 	uint8_t arp_tpa[4];
-} __attribute__((__packed__));
+} __attribute__ ((__packed__));
 #define arp_hrd ea_hdr.ar_hrd
 #define arp_pro ea_hdr.ar_pro
 #define arp_hln ea_hdr.ar_hln
@@ -86,4 +82,4 @@ struct  ether_arp {
 #define arp_op ea_hdr.ar_op
 #endif
 
-#endif
+#endif /* __TINC_ETHERNET_H__ */

src/event.c

@@ -1,121 +0,0 @@
-/*
-    event.c -- event queue
-    Copyright (C) 2002-2009 Guus Sliepen <guus@tinc-vpn.org>,
-                  2002-2005 Ivo Timmermans
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License along
-    with this program; if not, write to the Free Software Foundation, Inc.,
-    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-*/
-
-#include "system.h"
-
-#include "avl_tree.h"
-#include "event.h"
-#include "utils.h"
-#include "xalloc.h"
-
-avl_tree_t *event_tree;
-extern time_t now;
-
-static int id;
-
-static int event_compare(const event_t *a, const event_t *b) {
-	if(a->time > b->time) {
-		return 1;
-	}
-
-	if(a->time < b->time) {
-		return -1;
-	}
-
-	return a->id - b->id;
-}
-
-void init_events(void) {
-	event_tree = avl_alloc_tree((avl_compare_t) event_compare, (avl_action_t) free_event);
-}
-
-void exit_events(void) {
-	avl_delete_tree(event_tree);
-}
-
-void expire_events(void) {
-	avl_node_t *node;
-	event_t *event;
-	time_t diff;
-
-	/*
-	 * Make all events appear expired by subtracting the difference between
-	 * the expiration time of the last event and the current time.
-	 */
-
-	if(!event_tree->tail) {
-		return;
-	}
-
-	event = event_tree->tail->data;
-
-	if(event->time <= now) {
-		return;
-	}
-
-	diff = event->time - now;
-
-	for(node = event_tree->head; node; node = node->next) {
-		event = node->data;
-		event->time -= diff;
-	}
-}
-
-event_t *new_event(void) {
-	return xmalloc_and_zero(sizeof(event_t));
-}
-
-void free_event(event_t *event) {
-	free(event);
-}
-
-void event_add(event_t *event) {
-	event->id = ++id;
-	avl_insert(event_tree, event);
-}
-
-void event_del(event_t *event) {
-	avl_delete(event_tree, event);
-}
-
-event_t *get_expired_event(void) {
-	event_t *event;
-
-	if(event_tree->head) {
-		event = event_tree->head->data;
-
-		if(event->time <= now) {
-			avl_node_t *node = event_tree->head;
-			avl_unlink_node(event_tree, node);
-			free(node);
-			return event;
-		}
-	}
-
-	return NULL;
-}
-
-event_t *peek_next_event(void) {
-	if(event_tree->head) {
-		return event_tree->head->data;
-	}
-
-	return NULL;
-}

src/fake-gai-errnos.h

@@ -0,0 +1,19 @@
+/*
+ * fake library for ssh
+ *
+ * This file is included in getaddrinfo.c and getnameinfo.c.
+ * See getaddrinfo.c and getnameinfo.c.
+ */
+
+/* for old netdb.h */
+#ifndef EAI_NODATA
+#define EAI_NODATA	1
+#endif
+
+#ifndef EAI_MEMORY
+#define EAI_MEMORY	2
+#endif
+
+#ifndef EAI_FAMILY
+#define EAI_FAMILY	3
+#endif