Import Upstream version 1.0.12

This commit is contained in:
Guus Sliepen 2019-08-26 13:44:39 +02:00
parent 23bd9e9d53
commit c54d214bf2
33 changed files with 751 additions and 271 deletions

View file

@ -1,4 +1,4 @@
Copyright (C) 1998-2009 Ivo Timmermans, Guus Sliepen and others.
Copyright (C) 1998-2010 Ivo Timmermans, Guus Sliepen and others.
See the AUTHORS file for a complete list.
This program is free software; you can redistribute it and/or modify it under

View file

@ -15,3 +15,5 @@ The following applies to the LZO library:
When tinc is compiled with the --enable-tunemu option, the resulting binary
falls under the GPL version 3 or later.

192
ChangeLog
View file

@ -1,3 +1,195 @@
commit f7b2a2ea43fca323f543e152e6a43a29a4eb6671
Author: Guus Sliepen <guus@tinc-vpn.org>
Date: Wed Feb 3 22:49:48 2010 +0100
Releasing 1.0.12.
commit cd0c2e86a403fc9aabecdc8d51413f94491b5494
Author: Guus Sliepen <guus@tinc-vpn.org>
Date: Wed Feb 3 11:18:46 2010 +0100
Ensure peers with a meta connection always have our key.
This keeps UDP probes going, which in turn keeps NAT mappings alive.
commit 40d91ff619a6ea24a2a35c9d934bcc6bace27e24
Author: Guus Sliepen <guus@tinc-vpn.org>
Date: Tue Feb 2 22:49:21 2010 +0100
Update copyright notices.
commit 44f8f61396a92c899172a1863bbc9c705cbfa649
Author: Guus Sliepen <guus@tinc-vpn.org>
Date: Tue Feb 2 22:22:27 2010 +0100
Try to set DF bit on BSDs as well.
Every operating system seems to have its own, slightly different way to disable
packet fragmentation. Emit a compiler warning when no suitable way is found.
On OpenBSD, it seems impossible to do it for IPv4.
commit ed14ef93b47622ba13099dfc6be5335222e987a6
Author: Guus Sliepen <guus@tinc-vpn.org>
Date: Tue Feb 2 01:02:40 2010 +0100
Immediately exchange keys when establishing a meta connection.
This in turn will trigger PMTU discovery, and ensures nodes know each others
reflexive UDP address and port.
commit 4a0b9981513059755b9fd15b38fc198f46a0d6f2
Author: Guus Sliepen <guus@tinc-vpn.org>
Date: Tue Feb 2 00:51:44 2010 +0100
Determine peer's reflexive address and port when exchanging keys.
To help peers that are behind NAT connect to each other directly via UDP, they
need to know the exact external address and port that they use. Keys exchanged
between NATted peers necessarily go via a third node, which knows this address
and port, and can append this information to the keys, which is in turned used
by the peers.
Since PMTU discovery will immediately trigger UDP communication from both sides
to each other, this should allow direct communication between peers behind
full, address-restricted and port-restricted cone NAT.
commit d15099e0029578bfd24d6b464b941f4693280001
Author: Guus Sliepen <guus@tinc-vpn.org>
Date: Sat Jan 23 18:48:01 2010 +0100
Be liberal in accepting KEY_CHANGED/REQ_KEY/ANS_KEY requests.
When we got a key request for or from a node we don't know, we disconnected the
node that forwarded us that request. However, especially in TunnelServer mode,
disconnecting does not help. We now ignore such requests, but since there is no
way of telling the original sender that the request was dropped, we now retry
sending REQ_KEY requests when we don't get an ANS_KEY back.
commit 469fa318bc817908af9a51e3a980ffc998fae6f2
Author: Guus Sliepen <guus@tinc-vpn.org>
Date: Fri Jan 22 21:59:40 2010 +0100
Run subnet-up/down scripts for local MAC addresses as well.
commit 5d194b9f8767390d9fb1170554a8b6928214957a
Author: Guus Sliepen <guus@tinc-vpn.org>
Date: Fri Jan 22 21:47:26 2010 +0100
Fix subnet-up/down scripts being called with an empty SUBNET.
Commit 052ff8b2c598358d1c5febaa9f9f5fc5d384cfd3 contained a bug that causes
scripts to be called with an empty, or possibly corrupted SUBNET variable when
a Subnet is added or removed while the owner is still online. In router mode,
this normally does not happen, but in switch mode this is normal.
commit b45511118421920771f5dcd5e4bafc04376e4450
Author: Guus Sliepen <guus@tinc-vpn.org>
Date: Sat Jan 16 20:16:33 2010 +0100
Make MSS clamping configurable, but enabled by default.
It can either be set globally in tinc.conf, or per-node in host config files.
commit 95928f7c2910a7da01a89cdc63c86c4d87fac004
Author: Guus Sliepen <guus@tinc-vpn.org>
Date: Sat Jan 16 19:32:33 2010 +0100
Also clamp MSS of TCP over IPv6 packets.
commit b1945f70fe993ca447555a1e27f35638b0c1fd8b
Author: Guus Sliepen <guus@tinc-vpn.org>
Date: Fri Jan 15 23:41:14 2010 +0100
Optimise handling of select() returning <= 0.
Before, we immediately retried select() if it returned -1 and errno is EAGAIN
or EINTR, and if it returned 0 it would check for network events even if we
know there are none. Now, if -1 or 0 is returned we skip checking network
events, but we do check for timer and signal events.
commit 51099658c919794cde72ea1107b9d9b9c3cee926
Author: Guus Sliepen <guus@tinc-vpn.org>
Date: Fri Jan 15 23:19:08 2010 +0100
Ping nodes immediately when receiving SIGALRM.
One reason to send the ALRM signal is to let tinc immediately try to connect to
outgoing nodes, for example when PPP or DHCP configuration of the outgoing
interface finished. Conversely, when the outgoing interface goes down one can
now send this signal to let tinc quickly detect that links are down too.
commit 2a538ed34332b3392f866d56accd9efecc9467ed
Author: Guus Sliepen <guus@tinc-vpn.org>
Date: Fri Jan 15 13:42:37 2010 +0100
Clamp MSS of IPv4 SYN packets.
Some ISPs block the ICMP Fragmentation Needed packets that tinc sends. We
clamp the MSS of IPv4 SYN packets to prevent hosts behind those ISPs from
sending too large packets.
commit e4812ba9cc4262ec921944f02639ce55781d7497
Author: Guus Sliepen <guus@tinc-vpn.org>
Date: Thu Dec 24 12:42:21 2009 +0100
Allow Port and PMTUDiscovery options in tinc.conf, always enable PMTUDiscovery by default.
commit 7203d5fb07be2d3ae006c2b65d0be1e6533e1273
Author: Guus Sliepen <guus@tinc-vpn.org>
Date: Wed Dec 23 19:51:55 2009 +0100
Use xstrdup() instead of xasprintf() to copy static strings.
commit a9a803d5662832eb397837055a49fd94118eabf3
Author: Guus Sliepen <guus@tinc-vpn.org>
Date: Wed Dec 23 19:49:38 2009 +0100
Allow port to be specified in Address statements.
This allows one to connect to use more than one port number to connect to
another node. The syntax is now:
Address = <hostname> [<port>]
commit 43e34d8180c90682ed1601dec3de7f68ec96d65b
Author: Guus Sliepen <guus@tinc-vpn.org>
Date: Wed Dec 23 19:22:06 2009 +0100
Do not fragment packets smaller than RFC defined minimum MTUs.
For IPv6, the minimum MTU is 1280 (RFC 2460), for IPv4 the minimum is actually
68, but this is such a low limit that it will probably hurt performance, so we
do as if it is 576 (the minimum packet size hosts should be able to handle, RFC
791). If we detect a path MTU smaller than those minima, and we have to handle
a packet that is bigger than the PMTU but smaller than those minima, we forward
them via TCP instead of fragmenting or returning ICMP packets.
commit 369fe1ab1cbfc3f8305de1faab2e30157378b044
Author: Guus Sliepen <guus@tinc-vpn.org>
Date: Tue Dec 8 22:18:37 2009 +0000
Forget addresses of unreachable nodes.
We clear the cached address used for UDP connections when a node becomes
unreachable. This also prevents host-up scripts from passing the old, cached
address from when the host becomes reachable again from a different address.
commit 62f235e05c54e458724f437e519ed1b3e17835b1
Author: Guus Sliepen <guus@tinc-vpn.org>
Date: Sat Nov 28 11:56:13 2009 +0000
Remove unused variable in lookup_subnet_*() functions.
commit 92aefd25bf9e8e63f199cc252218f5c427f836b7
Author: Guus Sliepen <guus@tinc-vpn.org>
Date: Sat Nov 28 11:52:23 2009 +0000
When learning MAC addresses, only check our own Subnets for previous entries.
Before it would check all addresses, and not learn an address if another node
already claimed that address. This caused fast roaming to fail, the code from
commit 6f6f426b353596edca77829c0477268fc2fc1925 was never triggered.
commit 44834d030464bbe1f7733caba8d96c678f1d6cf2
Author: Guus Sliepen <guus@tinc-vpn.org>
Date: Sun Nov 1 16:24:39 2009 +0100

95
INSTALL
View file

@ -4,8 +4,10 @@ Installation Instructions
Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
2006, 2007, 2008, 2009 Free Software Foundation, Inc.
This file is free documentation; the Free Software Foundation gives
unlimited permission to copy, distribute and modify it.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved. This file is offered as-is,
without warranty of any kind.
Basic Installation
==================
@ -13,7 +15,11 @@ Basic Installation
Briefly, the shell commands `./configure; make; make install' should
configure, build, and install this package. The following
more-detailed instructions are generic; see the `README' file for
instructions specific to this package.
instructions specific to this package. Some packages provide this
`INSTALL' file but do not implement all of the features documented
below. The lack of an optional feature in a given package is not
necessarily a bug. More recommendations for GNU packages can be found
in *note Makefile Conventions: (standards)Makefile Conventions.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
@ -42,7 +48,7 @@ may remove or edit it.
you want to change it or regenerate `configure' using a newer version
of `autoconf'.
The simplest way to compile this package is:
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system.
@ -53,12 +59,22 @@ The simplest way to compile this package is:
2. Type `make' to compile the package.
3. Optionally, type `make check' to run any self-tests that come with
the package.
the package, generally using the just-built uninstalled binaries.
4. Type `make install' to install the programs and any data files and
documentation.
documentation. When installing into a prefix owned by root, it is
recommended that the package be configured and built as a regular
user, and only the `make install' phase executed with root
privileges.
5. You can remove the program binaries and object files from the
5. Optionally, type `make installcheck' to repeat any self-tests, but
this time using the binaries in their final installed location.
This target does not install anything. Running this target as a
regular user, particularly if the prior `make install' required
root privileges, verifies that the installation completed
correctly.
6. You can remove the program binaries and object files from the
source code directory by typing `make clean'. To also remove the
files that `configure' created (so you can compile the package for
a different kind of computer), type `make distclean'. There is
@ -67,8 +83,15 @@ The simplest way to compile this package is:
all sorts of other programs in order to regenerate files that came
with the distribution.
6. Often, you can also type `make uninstall' to remove the installed
files again.
7. Often, you can also type `make uninstall' to remove the installed
files again. In practice, not all packages have tested that
uninstallation works correctly, even though it is required by the
GNU Coding Standards.
8. Some packages, particularly those that use Automake, provide `make
distcheck', which can by used by developers to test that all other
targets like `make install' and `make uninstall' work correctly.
This target is generally not run by end users.
Compilers and Options
=====================
@ -93,7 +116,8 @@ same time, by placing the object files for each architecture in their
own directory. To do this, you can use GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
source code in the directory that `configure' is in and in `..'. This
is known as a "VPATH" build.
With a non-GNU `make', it is safer to compile the package for one
architecture at a time in the source code directory. After you have
@ -120,7 +144,8 @@ Installation Names
By default, `make install' installs the package's commands under
`/usr/local/bin', include files under `/usr/local/include', etc. You
can specify an installation prefix other than `/usr/local' by giving
`configure' the option `--prefix=PREFIX'.
`configure' the option `--prefix=PREFIX', where PREFIX must be an
absolute file name.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
@ -131,15 +156,46 @@ Documentation and other data files still use the regular prefix.
In addition, if you use an unusual directory layout you can give
options like `--bindir=DIR' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
you can set and what kinds of files go in them.
you can set and what kinds of files go in them. In general, the
default for these options is expressed in terms of `${prefix}', so that
specifying just `--prefix' will affect all of the other directory
specifications that were not explicitly provided.
The most portable way to affect installation locations is to pass the
correct locations to `configure'; however, many packages provide one or
both of the following shortcuts of passing variable assignments to the
`make install' command line to change installation locations without
having to reconfigure or recompile.
The first method involves providing an override variable for each
affected directory. For example, `make install
prefix=/alternate/directory' will choose an alternate location for all
directory configuration variables that were expressed in terms of
`${prefix}'. Any directories that were specified during `configure',
but not in terms of `${prefix}', must each be overridden at install
time for the entire installation to be relocated. The approach of
makefile variable overrides for each directory variable is required by
the GNU Coding Standards, and ideally causes no recompilation.
However, some platforms have known limitations with the semantics of
shared libraries that end up requiring recompilation when using this
method, particularly noticeable in packages that use GNU Libtool.
The second method involves providing the `DESTDIR' variable. For
example, `make install DESTDIR=/alternate/directory' will prepend
`/alternate/directory' before all installation names. The approach of
`DESTDIR' overrides is not required by the GNU Coding Standards, and
does not work on platforms that have drive letters. On the other hand,
it does better at avoiding recompilation issues, and works well even
when some directory options were not specified in terms of `${prefix}'
at `configure' time.
Optional Features
=================
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
Optional Features
=================
Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
@ -152,6 +208,13 @@ find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
Some packages offer the ability to configure how verbose the
execution of `make' will be. For these packages, running `./configure
--enable-silent-rules' sets the default to minimal output, which can be
overridden with `make V=1'; while running `./configure
--disable-silent-rules' sets the default to verbose, which can be
overridden with `make V=0'.
Particular systems
==================
@ -288,7 +351,7 @@ operates.
`configure' can determine that directory automatically.
`--prefix=DIR'
Use DIR as the installation prefix. *Note Installation Names::
Use DIR as the installation prefix. *note Installation Names::
for more details, including other options available for fine-tuning
the installation locations.

View file

@ -1,4 +1,4 @@
# Makefile.in generated by automake 1.11 from Makefile.am.
# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@ -269,7 +269,7 @@ distclean-hdr:
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@failcom='exit 1'; \
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
@ -294,7 +294,7 @@ $(RECURSIVE_TARGETS):
fi; test -z "$$fail"
$(RECURSIVE_CLEAN_TARGETS):
@failcom='exit 1'; \
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
@ -458,7 +458,8 @@ distdir: $(DISTFILES)
fi; \
done
-test -n "$(am__skip_mode_fix)" \
|| find "$(distdir)" -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
|| find "$(distdir)" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
@ -502,17 +503,17 @@ dist dist-all: distdir
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lzma*) \
unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
*.tar.xz*) \
xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac

15
NEWS
View file

@ -1,3 +1,18 @@
Version 1.0.12 Feb 3 2010
* Really allow fast roaming of hosts to other nodes in a switched VPN.
* Fixes missing or incorrect environment variables when calling host-up/down
and subnet-up/down scripts in some cases.
* Allow port to be specified in Address statements.
* Clamp MSS of TCP packets to the discovered path MTU.
* Let two nodes behind NAT learn each others current UDP address and port via
a third node, potentially allowing direct communications in a similar way to
STUN.
Version 1.0.11 Nov 1 2009
* Fixed potential crash when the HUP signal is sent.

6
README
View file

@ -1,7 +1,7 @@
This is the README file for tinc version 1.0.11. Installation
This is the README file for tinc version 1.0.12. Installation
instructions may be found in the INSTALL file.
tinc is Copyright (C) 1998-2009 by:
tinc is Copyright (C) 1998-2010 by:
Ivo Timmermans,
Guus Sliepen <guus@tinc-vpn.org>,
@ -55,7 +55,7 @@ should be changed into "Device", and "Device" should be changed into
Compatibility
-------------
Version 1.0.11 is compatible with 1.0pre8, 1.0 and later, but not with older
Version 1.0.12 is compatible with 1.0pre8, 1.0 and later, but not with older
versions of tinc.

10
aclocal.m4 vendored
View file

@ -1,4 +1,4 @@
# generated automatically by aclocal 1.11 -*- Autoconf -*-
# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
@ -13,8 +13,8 @@
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.64],,
[m4_warning([this file was generated for autoconf 2.64.
m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.65],,
[m4_warning([this file was generated for autoconf 2.65.
You have another version of autoconf. It may work, but is not guaranteed to.
If you have problems, you may need to regenerate the build system entirely.
To do so, use the procedure documented by the package, typically `autoreconf'.])])
@ -34,7 +34,7 @@ AC_DEFUN([AM_AUTOMAKE_VERSION],
[am__api_version='1.11'
dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
dnl require some minimum version. Point them to the right macro.
m4_if([$1], [1.11], [],
m4_if([$1], [1.11.1], [],
[AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
])
@ -50,7 +50,7 @@ m4_define([_AM_AUTOCONF_VERSION], [])
# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
[AM_AUTOMAKE_VERSION([1.11])dnl
[AM_AUTOMAKE_VERSION([1.11.1])dnl
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])

179
configure vendored
View file

@ -1,10 +1,12 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
# Generated by GNU Autoconf 2.64.
# Generated by GNU Autoconf 2.65.
#
#
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software
# Foundation, Inc.
# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
# Inc.
#
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
@ -524,7 +526,8 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
exec 7<&0 </dev/null 6>&1
test -n "$DJDIR" || exec 7<&0 </dev/null
exec 6>&1
# Name of the host.
# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
@ -1364,7 +1367,7 @@ Some influential environment variables:
LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
nonstandard directory <lib dir>
LIBS libraries to pass to the linker, e.g. -l<library>
CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
you have headers in a nonstandard directory <include dir>
CPP C preprocessor
@ -1435,7 +1438,7 @@ test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
configure
generated by GNU Autoconf 2.64
generated by GNU Autoconf 2.65
Copyright (C) 2009 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
@ -1482,7 +1485,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
ac_retval=1
fi
eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
return $ac_retval
as_fn_set_status $ac_retval
} # ac_fn_c_try_compile
@ -1519,7 +1522,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
ac_retval=1
fi
eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
return $ac_retval
as_fn_set_status $ac_retval
} # ac_fn_c_try_cpp
@ -1648,7 +1651,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -rf conftest.dSYM conftest_ipa8_conftest.oo
eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
return $ac_retval
as_fn_set_status $ac_retval
} # ac_fn_c_try_run
@ -1779,7 +1782,7 @@ fi
# left behind by Apple's compiler. We do this before executing the actions.
rm -rf conftest.dSYM conftest_ipa8_conftest.oo
eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
return $ac_retval
as_fn_set_status $ac_retval
} # ac_fn_c_try_link
@ -1893,7 +1896,7 @@ This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by $as_me, which was
generated by GNU Autoconf 2.64. Invocation command line was
generated by GNU Autoconf 2.65. Invocation command line was
$ $0 $@
@ -2146,7 +2149,7 @@ fi
for ac_site_file in "$ac_site_file1" "$ac_site_file2"
do
test "x$ac_site_file" = xNONE && continue
if test -r "$ac_site_file"; then
if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
$as_echo "$as_me: loading site script $ac_site_file" >&6;}
sed 's/^/| /' "$ac_site_file" >&5
@ -2155,9 +2158,9 @@ $as_echo "$as_me: loading site script $ac_site_file" >&6;}
done
if test -r "$cache_file"; then
# Some versions of bash will fail to source /dev/null (special
# files actually), so we avoid doing that.
if test -f "$cache_file"; then
# Some versions of bash will fail to source /dev/null (special files
# actually), so we avoid doing that. DJGPP emulates it as a regular file.
if test /dev/null != "$cache_file" && test -f "$cache_file"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
$as_echo "$as_me: loading cache $cache_file" >&6;}
case $cache_file in
@ -2577,6 +2580,7 @@ IFS=$as_save_IFS
fi
test -d ./--version && rmdir ./--version
if test "${ac_cv_path_mkdir+set}" = set; then
MKDIR_P="$ac_cv_path_mkdir -p"
else
@ -2584,7 +2588,6 @@ fi
# value for MKDIR_P within a source directory, because that will
# break other packages using the cache if that directory is
# removed, or if the value is a relative name.
test -d ./--version && rmdir ./--version
MKDIR_P="$ac_install_sh -d"
fi
fi
@ -2701,7 +2704,7 @@ fi
# Define the identity of the package.
PACKAGE=tinc
VERSION=1.0.11
VERSION=1.0.12
cat >>confdefs.h <<_ACEOF
@ -3154,32 +3157,30 @@ $as_echo "$ac_try_echo"; } >&5
... rest of stderr output deleted ...
10q' conftest.err >conftest.er1
cat conftest.er1 >&5
rm -f conftest.er1 conftest.err
fi
rm -f conftest.er1 conftest.err
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }
done
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include <stdio.h>
int
main ()
{
FILE *f = fopen ("conftest.out", "w");
return ferror (f) || fclose (f) != 0;
;
return 0;
}
_ACEOF
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out conftest.out"
ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
# Try to create an executable without -o first, disregard a.out.
# It will help us diagnose broken compilers, and finding out an intuition
# of exeext.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
$as_echo_n "checking for C compiler default output file name... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
$as_echo_n "checking whether the C compiler works... " >&6; }
ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
# The possible output files:
@ -3241,10 +3242,10 @@ test "$ac_cv_exeext" = no && ac_cv_exeext=
else
ac_file=''
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
$as_echo "$ac_file" >&6; }
if test -z "$ac_file"; then :
$as_echo "$as_me: failed program was:" >&5
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
$as_echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
@ -3252,51 +3253,18 @@ $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
{ as_fn_set_status 77
as_fn_error "C compiler cannot create executables
See \`config.log' for more details." "$LINENO" 5; }; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
$as_echo_n "checking for C compiler default output file name... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
$as_echo "$ac_file" >&6; }
ac_exeext=$ac_cv_exeext
# Check that the compiler produces executables we can run. If not, either
# the compiler is broken, or we cross compile.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
$as_echo_n "checking whether the C compiler works... " >&6; }
# If not cross compiling, check that we can run a simple program.
if test "$cross_compiling" != yes; then
if { ac_try='./$ac_file'
{ { case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
(eval "$ac_try") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; }; then
cross_compiling=no
else
if test "$cross_compiling" = maybe; then
cross_compiling=yes
else
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error "cannot run C compiled programs.
If you meant to cross compile, use \`--host'.
See \`config.log' for more details." "$LINENO" 5; }
fi
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out conftest.out
rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
ac_clean_files=$ac_clean_files_save
# Check that the compiler produces executables we can run. If not, either
# the compiler is broken, or we cross compile.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
$as_echo_n "checking whether we are cross compiling... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
$as_echo "$cross_compiling" >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
$as_echo_n "checking for suffix of executables... " >&6; }
if { { ac_try="$ac_link"
@ -3329,13 +3297,72 @@ $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error "cannot compute suffix of executables: cannot compile and link
See \`config.log' for more details." "$LINENO" 5; }
fi
rm -f conftest$ac_cv_exeext
rm -f conftest conftest$ac_cv_exeext
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
$as_echo "$ac_cv_exeext" >&6; }
rm -f conftest.$ac_ext
EXEEXT=$ac_cv_exeext
ac_exeext=$EXEEXT
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include <stdio.h>
int
main ()
{
FILE *f = fopen ("conftest.out", "w");
return ferror (f) || fclose (f) != 0;
;
return 0;
}
_ACEOF
ac_clean_files="$ac_clean_files conftest.out"
# Check that the compiler produces executables we can run. If not, either
# the compiler is broken, or we cross compile.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
$as_echo_n "checking whether we are cross compiling... " >&6; }
if test "$cross_compiling" != yes; then
{ { ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
(eval "$ac_link") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }
if { ac_try='./conftest$ac_cv_exeext'
{ { case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
$as_echo "$ac_try_echo"; } >&5
(eval "$ac_try") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; }; then
cross_compiling=no
else
if test "$cross_compiling" = maybe; then
cross_compiling=yes
else
{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error "cannot run C compiled programs.
If you meant to cross compile, use \`--host'.
See \`config.log' for more details." "$LINENO" 5; }
fi
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
$as_echo "$cross_compiling" >&6; }
rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
ac_clean_files=$ac_clean_files_save
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
$as_echo_n "checking for suffix of object files... " >&6; }
if test "${ac_cv_objext+set}" = set; then :
@ -7118,7 +7145,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# values after options handling.
ac_log="
This file was extended by $as_me, which was
generated by GNU Autoconf 2.64. Invocation command line was
generated by GNU Autoconf 2.65. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
@ -7158,6 +7185,7 @@ Usage: $0 [OPTION]... [TAG]...
-h, --help print this help, then exit
-V, --version print version number and configuration settings, then exit
--config print configuration, then exit
-q, --quiet, --silent
do not print progress messages
-d, --debug don't remove temporary files
@ -7180,10 +7208,11 @@ Report bugs to the package provider."
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
config.status
configured by $0, generated by GNU Autoconf 2.64,
with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
configured by $0, generated by GNU Autoconf 2.65,
with options \\"\$ac_cs_config\\"
Copyright (C) 2009 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
@ -7221,6 +7250,8 @@ do
ac_cs_recheck=: ;;
--version | --versio | --versi | --vers | --ver | --ve | --v | -V )
$as_echo "$ac_cs_version"; exit ;;
--config | --confi | --conf | --con | --co | --c )
$as_echo "$ac_cs_config"; exit ;;
--debug | --debu | --deb | --de | --d | -d )
debug=: ;;
--file | --fil | --fi | --f )
@ -7412,7 +7443,7 @@ s/'"$ac_delim"'$//
t delim
:nl
h
s/\(.\{148\}\).*/\1/
s/\(.\{148\}\)..*/\1/
t more1
s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
p
@ -7426,7 +7457,7 @@ s/.\{148\}//
t nl
:delim
h
s/\(.\{148\}\).*/\1/
s/\(.\{148\}\)..*/\1/
t more2
s/["\\]/\\&/g; s/^/"/; s/$/"/
p

View file

@ -3,7 +3,7 @@ dnl Process this file with autoconf to produce a configure script.
AC_PREREQ(2.61)
AC_INIT
AC_CONFIG_SRCDIR([src/tincd.c])
AM_INIT_AUTOMAKE(tinc, 1.0.11)
AM_INIT_AUTOMAKE(tinc, 1.0.12)
AC_CONFIG_HEADERS([config.h])
AM_MAINTAINER_MODE

View file

@ -1,4 +1,4 @@
# Makefile.in generated by automake 1.11 from Makefile.am.
# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,

Binary file not shown.

View file

@ -1,9 +1,9 @@
% texinfo.tex -- TeX macros to handle Texinfo files.
%
%
% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
\def\texinfoversion{2009-05-16.16}
\def\texinfoversion{2009-08-14.15}
%
% Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
@ -1332,13 +1332,16 @@ output) for that.)}
\ifpdf
%
% Color manipulation macros based on pdfcolor.tex.
\def\cmykDarkRed{0.28 1 1 0.35}
\def\cmykBlack{0 0 0 1}
% Color manipulation macros based on pdfcolor.tex,
% except using rgb instead of cmyk; the latter is said to render as a
% very dark gray on-screen and a very dark halftone in print, instead
% of actual black.
\def\rgbDarkRed{0.50 0.09 0.12}
\def\rgbBlack{0 0 0}
%
% k sets the color for filling (usual text, etc.);
% K sets the color for stroking (thin rules, e.g., normal _'s).
\def\pdfsetcolor#1{\pdfliteral{#1 k #1 K}}
\def\pdfsetcolor#1{\pdfliteral{#1 rg #1 RG}}
%
% Set color, and create a mark which defines \thiscolor accordingly,
% so that \makeheadline knows which color to restore.
@ -1348,7 +1351,7 @@ output) for that.)}
\pdfsetcolor{#1}%
}
%
\def\maincolor{\cmykBlack}
\def\maincolor{\rgbBlack}
\pdfsetcolor{\maincolor}
\edef\thiscolor{\maincolor}
\def\lastcolordefs{}
@ -1443,8 +1446,8 @@ output) for that.)}
%
% by default, use a color that is dark enough to print on paper as
% nearly black, but still distinguishable for online viewing.
\def\urlcolor{\cmykDarkRed}
\def\linkcolor{\cmykDarkRed}
\def\urlcolor{\rgbDarkRed}
\def\linkcolor{\rgbDarkRed}
\def\endlink{\setcolor{\maincolor}\pdfendlink}
%
% Adding outlines to PDF; macros for calculating structure of outlines
@ -4322,6 +4325,7 @@ end
\definedummyword\code
\definedummyword\command
\definedummyword\dfn
\definedummyword\email
\definedummyword\emph
\definedummyword\env
\definedummyword\file
@ -9272,12 +9276,8 @@ directory should work if nowhere else does.}
@markupsetuplqdefault
@markupsetuprqdefault
@c Gnulib now utterly and painfully insists on no trailing whitespace.
@c So we have to nuke it.
@c Local variables:
@c eval: (add-hook 'write-file-hooks 'time-stamp)
@c eval: (add-hook 'write-file-hooks 'nuke-trailing-whitespace)
@c page-delimiter: "^\\\\message"
@c time-stamp-start: "def\\\\texinfoversion{"
@c time-stamp-format: "%:y-%02m-%02d.%02H"

View file

@ -1,4 +1,4 @@
.Dd 2009-03-05
.Dd 2010-01-16
.Dt TINC.CONF 5
.\" Manual page created by:
.\" Ivo Timmermans
@ -330,9 +330,10 @@ Since host configuration files only contain public keys,
no secrets are revealed by sending out this information.
.Bl -tag -width indent
.It Va Address Li = Ar address Bq recommended
.It Va Address Li = Ar address Oo port Oc Bq recommended
The IP address or hostname of this tinc daemon on the real network.
This will only be used when trying to make an outgoing connection to this tinc daemon.
Optionally, a port can be specified to use for this address.
Multiple
.Va Address
variables can be specified, in which case each address will be tried until a working
@ -346,6 +347,11 @@ Furthermore, specifying
will turn off packet encryption.
It is best to use only those ciphers which support CBC mode.
.It Va ClampMSS Li = yes | no Pq yes
This option specifies whether tinc should clamp the maximum segment size (MSS)
of TCP packets to the path MTU. This helps in situations where ICMP
Fragmentation Needed or Packet too Big messages are dropped by firewalls.
.It Va Compression Li = Ar level Pq 0
This option sets the level of compression used for UDP packets.
Possible values are 0 (off), 1 (fast zlib) and any integer up to 9 (best zlib),
@ -380,7 +386,10 @@ When this option is enabled, tinc will try to discover the path MTU to this node
After the path MTU has been discovered, it will be enforced on the VPN.
.It Va Port Li = Ar port Pq 655
The port number on which this tinc daemon is listening for incoming connections.
The port number on which this tinc daemon is listening for incoming connections,
which is used if no port number is specified in an
.Va Address
statement.
.It Va PublicKey Li = Ar key Bq obsolete
The public RSA key of this tinc daemon.

View file

@ -5,10 +5,10 @@ START-INFO-DIR-ENTRY
* tinc: (tinc). The tinc Manual.
END-INFO-DIR-ENTRY
This is the info manual for tinc version 1.0.11, a Virtual Private
This is the info manual for tinc version 1.0.12, a Virtual Private
Network daemon.
Copyright (C) 1998-2009 Ivo Timmermans, Guus Sliepen
Copyright (C) 1998-2010 Ivo Timmermans, Guus Sliepen
<guus@tinc-vpn.org> and Wessel Dankers <wsl@tinc-vpn.org>.
Permission is granted to make and distribute verbatim copies of this
@ -855,10 +855,11 @@ File: tinc.info, Node: Host configuration variables, Next: Scripts, Prev: Mai
4.4.2 Host configuration variables
----------------------------------
Address = <IP ADDRESS|HOSTNAME> [recommended]
Address = <IP ADDRESS|HOSTNAME> [<port>] [recommended]
This variable is only required if you want to connect to this
host. It must resolve to the external IP address where the host
can be reached, not the one that is internal to the VPN.
can be reached, not the one that is internal to the VPN. If no
port is specified, the default Port is used.
Cipher = <CIPHER> (blowfish)
The symmetric cipher algorithm used to encrypt UDP packets. Any
@ -866,6 +867,12 @@ Cipher = <CIPHER> (blowfish)
specifying "none" will turn off packet encryption. It is best to
use only those ciphers which support CBC mode.
ClampMSS = <yes|no> (yes)
This option specifies whether tinc should clamp the maximum
segment size (MSS) of TCP packets to the path MTU. This helps in
situations where ICMP Fragmentation Needed or Packet too Big
messages are dropped by firewalls.
Compression = <LEVEL> (0)
This option sets the level of compression used for UDP packets.
Possible values are 0 (off), 1 (fast zlib) and any integer up to 9
@ -2224,14 +2231,16 @@ Concept Index
* CHALLENGE: Authentication protocol.
(line 10)
* CIDR notation: Host configuration variables.
(line 85)
(line 92)
* Cipher: Host configuration variables.
(line 11)
(line 12)
* ClampMSS: Host configuration variables.
(line 18)
* client: How connections work.
(line 18)
* command line: Runtime options. (line 9)
* Compression: Host configuration variables.
(line 17)
(line 24)
* connection: The connection. (line 6)
* ConnectTo: Main configuration variables.
(line 27)
@ -2248,7 +2257,7 @@ Concept Index
* DeviceType: Main configuration variables.
(line 45)
* Digest: Host configuration variables.
(line 22)
(line 29)
* encapsulating: The UDP tunnel. (line 30)
* encryption: Encryption of network packets.
(line 6)
@ -2265,7 +2274,7 @@ Concept Index
* ID: Authentication protocol.
(line 10)
* IndirectData: Host configuration variables.
(line 27)
(line 34)
* INTERFACE: Scripts. (line 58)
* Interface: Main configuration variables.
(line 91)
@ -2280,7 +2289,7 @@ Concept Index
* MACExpire: Main configuration variables.
(line 133)
* MACLength: Host configuration variables.
(line 35)
(line 42)
* meta-protocol: The meta-connection. (line 18)
* META_KEY: Authentication protocol.
(line 10)
@ -2299,7 +2308,7 @@ Concept Index
* OpenSSL: OpenSSL. (line 6)
* options: Runtime options. (line 9)
* PEM format: Host configuration variables.
(line 60)
(line 67)
* PING: The meta-protocol. (line 89)
* PingInterval: Main configuration variables.
(line 143)
@ -2307,12 +2316,12 @@ Concept Index
(line 147)
* platforms: Supported platforms. (line 6)
* PMTU: Host configuration variables.
(line 40)
(line 47)
* PMTUDiscovery: Host configuration variables.
(line 43)
(line 50)
* PONG: The meta-protocol. (line 89)
* Port: Host configuration variables.
(line 48)
(line 55)
* port numbers: Other files. (line 17)
* PriorityInheritance: Main configuration variables.
(line 153)
@ -2325,9 +2334,9 @@ Concept Index
* ProcessPriority: Main configuration variables.
(line 172)
* PublicKey: Host configuration variables.
(line 52)
(line 59)
* PublicKeyFile: Host configuration variables.
(line 55)
(line 62)
* release: Supported platforms. (line 14)
* REMOTEADDRESS: Scripts. (line 67)
* REMOTEPORT: Scripts. (line 70)
@ -2343,15 +2352,15 @@ Concept Index
* signals: Signals. (line 6)
* SUBNET: Scripts. (line 74)
* Subnet: Host configuration variables.
(line 67)
(line 74)
* Subnet weight: Host configuration variables.
(line 90)
(line 97)
* SVPN: Security. (line 11)
* switch: Main configuration variables.
(line 111)
* TCP: The meta-connection. (line 10)
* TCPonly: Host configuration variables.
(line 97)
(line 104)
* TINC: Security. (line 6)
* tinc: Introduction. (line 6)
* tinc-down: Scripts. (line 18)
@ -2416,33 +2425,33 @@ Node: How connections work22594
Node: Configuration files23816
Node: Main configuration variables24823
Node: Host configuration variables32865
Node: Scripts37942
Node: How to configure40712
Node: Generating keypairs41975
Node: Network interfaces42474
Node: Example configuration44322
Node: Running tinc49634
Node: Runtime options50224
Node: Signals53019
Node: Debug levels54088
Node: Solving problems55024
Node: Error messages56576
Node: Sending bug reports60589
Node: Technical information61541
Node: The connection61772
Node: The UDP tunnel62084
Node: The meta-connection65145
Node: The meta-protocol66614
Node: Security71623
Node: Authentication protocol72753
Node: Encryption of network packets77757
Node: Security issues79130
Node: Platform specific information80747
Node: Interface configuration80975
Node: Routes82874
Node: About us84790
Node: Contact information84965
Node: Authors85369
Node: Concept Index85774
Node: Scripts38276
Node: How to configure41046
Node: Generating keypairs42309
Node: Network interfaces42808
Node: Example configuration44656
Node: Running tinc49968
Node: Runtime options50558
Node: Signals53353
Node: Debug levels54422
Node: Solving problems55358
Node: Error messages56910
Node: Sending bug reports60923
Node: Technical information61875
Node: The connection62106
Node: The UDP tunnel62418
Node: The meta-connection65479
Node: The meta-protocol66948
Node: Security71957
Node: Authentication protocol73087
Node: Encryption of network packets78091
Node: Security issues79464
Node: Platform specific information81081
Node: Interface configuration81309
Node: Routes83208
Node: About us85124
Node: Contact information85299
Node: Authors85703
Node: Concept Index86108

End Tag Table

View file

@ -15,7 +15,7 @@
This is the info manual for @value{PACKAGE} version @value{VERSION}, a Virtual Private Network daemon.
Copyright @copyright{} 1998-2009 Ivo Timmermans,
Copyright @copyright{} 1998-2010 Ivo Timmermans,
Guus Sliepen <guus@@tinc-vpn.org> and
Wessel Dankers <wsl@@tinc-vpn.org>.
@ -39,7 +39,7 @@ permission notice identical to this one.
@vskip 0pt plus 1filll
This is the info manual for @value{PACKAGE} version @value{VERSION}, a Virtual Private Network daemon.
Copyright @copyright{} 1998-2009 Ivo Timmermans,
Copyright @copyright{} 1998-2010 Ivo Timmermans,
Guus Sliepen <guus@@tinc-vpn.org> and
Wessel Dankers <wsl@@tinc-vpn.org>.
@ -943,10 +943,11 @@ and will only allow nodes and subnets on the VPN which are present in the
@table @asis
@cindex Address
@item Address = <@var{IP address}|@var{hostname}> [recommended]
@item Address = <@var{IP address}|@var{hostname}> [<port>] [recommended]
This variable is only required if you want to connect to this host. It
must resolve to the external IP address where the host can be reached,
not the one that is internal to the VPN.
If no port is specified, the default Port is used.
@cindex Cipher
@item Cipher = <@var{cipher}> (blowfish)
@ -955,6 +956,12 @@ Any cipher supported by OpenSSL is recognized.
Furthermore, specifying "none" will turn off packet encryption.
It is best to use only those ciphers which support CBC mode.
@cindex ClampMSS
@item ClampMSS = <yes|no> (yes)
This option specifies whether tinc should clamp the maximum segment size (MSS)
of TCP packets to the path MTU. This helps in situations where ICMP
Fragmentation Needed or Packet too Big messages are dropped by firewalls.
@cindex Compression
@item Compression = <@var{level}> (0)
This option sets the level of compression used for UDP packets.

View file

@ -1,4 +1,4 @@
# Makefile.in generated by automake 1.11 from Makefile.am.
# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,

View file

@ -1,4 +1,4 @@
# Makefile.in generated by automake 1.11 from Makefile.am.
# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,

View file

@ -1,4 +1,4 @@
# Makefile.in generated by automake 1.11 from Makefile.am.
# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,

View file

@ -1,6 +1,6 @@
/*
connection.h -- header for connection.c
Copyright (C) 2000-2009 Guus Sliepen <guus@tinc-vpn.org>,
Copyright (C) 2000-2010 Guus Sliepen <guus@tinc-vpn.org>,
2000-2005 Ivo Timmermans
This program is free software; you can redistribute it and/or modify
@ -29,6 +29,7 @@
#define OPTION_INDIRECT 0x0001
#define OPTION_TCPONLY 0x0002
#define OPTION_PMTU_DISCOVERY 0x0004
#define OPTION_CLAMP_MSS 0x0008
typedef struct connection_status_t {
int pinged:1; /* sent ping */

View file

@ -1,6 +1,6 @@
/*
graph.c -- graph algorithms
Copyright (C) 2001-2009 Guus Sliepen <guus@tinc-vpn.org>,
Copyright (C) 2001-2010 Guus Sliepen <guus@tinc-vpn.org>,
2001-2005 Ivo Timmermans
This program is free software; you can redistribute it and/or modify
@ -53,6 +53,7 @@
#include "netutl.h"
#include "node.h"
#include "process.h"
#include "protocol.h"
#include "subnet.h"
#include "utils.h"
#include "xalloc.h"
@ -251,7 +252,7 @@ void sssp_bfs(void) {
/* TODO: only clear status.validkey if node is unreachable? */
n->status.validkey = false;
n->status.waitingforkey = false;
n->last_req_key = 0;
n->maxmtu = MTU;
n->minmtu = 0;
@ -286,6 +287,11 @@ void sssp_bfs(void) {
free(envp[i]);
subnet_update(n, NULL, n->status.reachable);
if(!n->status.reachable)
update_node_udp(n, NULL);
else if(n->connection)
send_ans_key(n);
}
}
}

View file

@ -1,7 +1,7 @@
/*
net.c -- most of the network code
Copyright (C) 1998-2005 Ivo Timmermans,
2000-2009 Guus Sliepen <guus@tinc-vpn.org>
2000-2010 Guus Sliepen <guus@tinc-vpn.org>
2006 Scott Lamb <slamb@slamb.org>
This program is free software; you can redistribute it and/or modify
@ -374,11 +374,10 @@ int main_loop(void) {
dump_connections();
return 1;
}
continue;
}
check_network_activity(&readset, &writeset);
if(r > 0)
check_network_activity(&readset, &writeset);
if(do_purge) {
purge();
@ -418,8 +417,13 @@ int main_loop(void) {
}
if(sigalrm) {
avl_node_t *node;
logger(LOG_INFO, "Flushing event queue");
expire_events();
for(node = connection_tree->head; node; node = node->next) {
connection_t *c = node->data;
send_ping(c);
}
sigalrm = false;
}

View file

@ -1,7 +1,7 @@
/*
net_packet.c -- Handles in- and outgoing VPN packets
Copyright (C) 1998-2005 Ivo Timmermans,
2000-2009 Guus Sliepen <guus@tinc-vpn.org>
2000-2010 Guus Sliepen <guus@tinc-vpn.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@ -353,10 +353,10 @@ static void send_udppacket(node_t *n, vpn_packet_t *origpkt) {
"No valid key known yet for %s (%s), forwarding via TCP",
n->name, n->hostname);
if(!n->status.waitingforkey)
if(n->last_req_key + 10 < now) {
send_req_key(n);
n->status.waitingforkey = true;
n->last_req_key = now;
}
send_tcppacket(n->nexthop->connection, origpkt);

View file

@ -1,7 +1,7 @@
/*
net_setup.c -- Setup.
Copyright (C) 1998-2005 Ivo Timmermans,
2000-2009 Guus Sliepen <guus@tinc-vpn.org>
2000-2010 Guus Sliepen <guus@tinc-vpn.org>
2006 Scott Lamb <slamb@slamb.org>
This program is free software; you can redistribute it and/or modify
@ -218,8 +218,8 @@ bool setup_myself(void) {
myself->connection = new_connection();
init_configuration(&myself->connection->config_tree);
xasprintf(&myself->hostname, "MYSELF");
xasprintf(&myself->connection->hostname, "MYSELF");
myself->hostname = xstrdup("MYSELF");
myself->connection->hostname = xstrdup("MYSELF");
myself->connection->options = 0;
myself->connection->protocol_version = PROT_CURRENT;
@ -246,8 +246,9 @@ bool setup_myself(void) {
if(!read_rsa_private_key())
return false;
if(!get_config_string(lookup_config(myself->connection->config_tree, "Port"), &myport))
xasprintf(&myport, "655");
if(!get_config_string(lookup_config(config_tree, "Port"), &myport)
&& !get_config_string(lookup_config(myself->connection->config_tree, "Port"), &myport))
myport = xstrdup("655");
/* Read in all the subnets specified in the host configuration file */
@ -296,13 +297,18 @@ bool setup_myself(void) {
} else
routing_mode = RMODE_ROUTER;
// Enable PMTUDiscovery by default if we are in router mode.
choice = routing_mode == RMODE_ROUTER;
choice = true;
get_config_bool(lookup_config(myself->connection->config_tree, "PMTUDiscovery"), &choice);
if(choice)
get_config_bool(lookup_config(config_tree, "PMTUDiscovery"), &choice);
if(choice)
myself->options |= OPTION_PMTU_DISCOVERY;
choice = true;
get_config_bool(lookup_config(config_tree, "ClampMSS"), &choice);
get_config_bool(lookup_config(myself->connection->config_tree, "ClampMSS"), &choice);
if(choice)
myself->options |= OPTION_CLAMP_MSS;
get_config_bool(lookup_config(config_tree, "PriorityInheritance"), &priorityinheritance);
#if !defined(SOL_IP) || !defined(IP_TOS)

View file

@ -1,7 +1,7 @@
/*
net_socket.c -- Handle various kinds of sockets.
Copyright (C) 1998-2005 Ivo Timmermans,
2000-2009 Guus Sliepen <guus@tinc-vpn.org>
2000-2010 Guus Sliepen <guus@tinc-vpn.org>
2006 Scott Lamb <slamb@slamb.org>
2009 Florian Forster <octo@verplant.org>
@ -261,9 +261,13 @@ int setup_vpn_in_socket(const sockaddr_t *sa) {
option = 1;
setsockopt(nfd, SOL_SOCKET, SO_REUSEADDR, &option, sizeof(option));
#if defined(SOL_IPV6) && defined(IPV6_V6ONLY)
#if defined(IPPROTO_IPV6) && defined(IPV6_V6ONLY)
if(sa->sa.sa_family == AF_INET6)
setsockopt(nfd, SOL_IPV6, IPV6_V6ONLY, &option, sizeof option);
setsockopt(nfd, IPPROTO_IPV6, IPV6_V6ONLY, &option, sizeof option);
#endif
#if defined(IP_DONTFRAG) && !defined(IP_DONTFRAGMENT)
#define IP_DONTFRAGMENT IP_DONTFRAG
#endif
#if defined(SOL_IP) && defined(IP_MTU_DISCOVER) && defined(IP_PMTUDISC_DO)
@ -276,6 +280,8 @@ int setup_vpn_in_socket(const sockaddr_t *sa) {
option = 1;
setsockopt(nfd, IPPROTO_IP, IP_DONTFRAGMENT, &option, sizeof(option));
}
#else
#warning No way to disable IPv4 fragmentation
#endif
#if defined(SOL_IPV6) && defined(IPV6_MTU_DISCOVER) && defined(IPV6_PMTUDISC_DO)
@ -283,6 +289,13 @@ int setup_vpn_in_socket(const sockaddr_t *sa) {
option = IPV6_PMTUDISC_DO;
setsockopt(nfd, SOL_IPV6, IPV6_MTU_DISCOVER, &option, sizeof(option));
}
#elif defined(IPPROTO_IPV6) && defined(IPV6_DONTFRAG)
if(myself->options & OPTION_PMTU_DISCOVERY) {
option = 1;
setsockopt(nfd, IPPROTO_IPV6, IPV6_DONTFRAG, &option, sizeof(option));
}
#else
#warning No way to disable IPv6 fragmentation
#endif
if (!bind_to_interface(nfd)) {
@ -331,7 +344,7 @@ void finish_connecting(connection_t *c) {
}
void do_outgoing_connection(connection_t *c) {
char *address, *port;
char *address, *port, *space;
int result;
if(!c->outgoing) {
@ -352,8 +365,14 @@ begin:
get_config_string(c->outgoing->cfg, &address);
if(!get_config_string(lookup_config(c->config_tree, "Port"), &port))
xasprintf(&port, "655");
space = strchr(address, ' ');
if(space) {
port = xstrdup(space + 1);
*space = 0;
} else {
if(!get_config_string(lookup_config(c->config_tree, "Port"), &port))
port = xstrdup("655");
}
c->outgoing->ai = str2addrinfo(address, port, SOCK_STREAM);
free(address);

View file

@ -1,6 +1,6 @@
/*
node.h -- header for node.c
Copyright (C) 2001-2009 Guus Sliepen <guus@tinc-vpn.org>,
Copyright (C) 2001-2010 Guus Sliepen <guus@tinc-vpn.org>,
2001-2005 Ivo Timmermans
This program is free software; you can redistribute it and/or modify
@ -30,7 +30,7 @@
typedef struct node_status_t {
int unused_active:1; /* 1 if active (not used for nodes) */
int validkey:1; /* 1 if we currently have a valid key for him */
int waitingforkey:1; /* 1 if we already sent out a request */
int unused_waitingforkey:1; /* 1 if we already sent out a request */
int visited:1; /* 1 if this node has been visited by one of the graph algorithms */
int reachable:1; /* 1 if this node is reachable in the graph */
int indirect:1; /* 1 if this node is not directly reachable by us */
@ -45,6 +45,7 @@ typedef struct node_t {
char *hostname; /* the hostname of its real ip */
node_status_t status;
time_t last_req_key;
const EVP_CIPHER *incipher; /* Cipher type for UDP packets received from him */
char *inkey; /* Cipher key and iv */

View file

@ -95,7 +95,7 @@ extern bool send_add_subnet(struct connection_t *, const struct subnet_t *);
extern bool send_del_subnet(struct connection_t *, const struct subnet_t *);
extern bool send_add_edge(struct connection_t *, const struct edge_t *);
extern bool send_del_edge(struct connection_t *, const struct edge_t *);
extern bool send_key_changed();
extern void send_key_changed();
extern bool send_req_key(struct node_t *);
extern bool send_ans_key(struct node_t *);
extern bool send_tcppacket(struct connection_t *, struct vpn_packet_t *);

View file

@ -1,7 +1,7 @@
/*
protocol_auth.c -- handle the meta-protocol, authentication
Copyright (C) 1999-2005 Ivo Timmermans,
2000-2009 Guus Sliepen <guus@tinc-vpn.org>
2000-2010 Guus Sliepen <guus@tinc-vpn.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@ -453,6 +453,11 @@ bool send_ack(connection_t *c) {
if(myself->options & OPTION_PMTU_DISCOVERY)
c->options |= OPTION_PMTU_DISCOVERY;
choice = myself->options & OPTION_CLAMP_MSS;
get_config_bool(lookup_config(c->config_tree, "ClampMSS"), &choice);
if(choice)
c->options |= OPTION_CLAMP_MSS;
get_config_int(lookup_config(c->config_tree, "Weight"), &c->estimated_weight);
return send_request(c, "%d %s %d %x", ACK, myport, c->estimated_weight, c->options);
@ -496,6 +501,7 @@ bool ack_h(connection_t *c) {
int weight, mtu;
uint32_t options;
node_t *n;
bool choice;
if(sscanf(c->buffer, "%*d " MAX_STRING " %d %x", hisport, &weight, &options) != 3) {
logger(LOG_ERR, "Got bad %s from %s (%s)", "ACK", c->name,
@ -536,6 +542,13 @@ bool ack_h(connection_t *c) {
if(get_config_int(lookup_config(myself->connection->config_tree, "PMTU"), &mtu) && mtu < n->mtu)
n->mtu = mtu;
if(get_config_bool(lookup_config(c->config_tree, "ClampMSS"), &choice)) {
if(choice)
c->options |= OPTION_CLAMP_MSS;
else
c->options &= ~OPTION_CLAMP_MSS;
}
/* Activate this connection */
c->allow_request = ALL;

View file

@ -1,7 +1,7 @@
/*
protocol_key.c -- handle the meta-protocol, key exchange
Copyright (C) 1999-2005 Ivo Timmermans,
2000-2009 Guus Sliepen <guus@tinc-vpn.org>
2000-2010 Guus Sliepen <guus@tinc-vpn.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@ -36,15 +36,19 @@
bool mykeyused = false;
bool send_key_changed() {
/* Only send this message if some other daemon requested our key previously.
This reduces unnecessary key_changed broadcasts.
*/
void send_key_changed() {
avl_node_t *node;
connection_t *c;
if(!mykeyused)
return true;
send_request(broadcast, "%d %x %s", KEY_CHANGED, rand(), myself->name);
return send_request(broadcast, "%d %x %s", KEY_CHANGED, rand(), myself->name);
/* Immediately send new keys to directly connected nodes to keep UDP mappings alive */
for(node = connection_tree->head; node; node = node->next) {
c = node->data;
if(c->status.active && c->node && c->node->status.reachable)
send_ans_key(c->node);
}
}
bool key_changed_h(connection_t *c) {
@ -57,6 +61,11 @@ bool key_changed_h(connection_t *c) {
return false;
}
if(!check_id(name)) {
logger(LOG_ERR, "Got bad %s from %s (%s): %s", "KEY_CHANGED", c->name, c->hostname, "invalid name");
return false;
}
if(seen_request(c->buffer))
return true;
@ -65,11 +74,11 @@ bool key_changed_h(connection_t *c) {
if(!n) {
logger(LOG_ERR, "Got %s from %s (%s) origin %s which does not exist",
"KEY_CHANGED", c->name, c->hostname, name);
return false;
return true;
}
n->status.validkey = false;
n->status.waitingforkey = false;
n->last_req_key = 0;
/* Tell the others */
@ -94,12 +103,17 @@ bool req_key_h(connection_t *c) {
return false;
}
if(!check_id(from_name) || !check_id(to_name)) {
logger(LOG_ERR, "Got bad %s from %s (%s): %s", "REQ_KEY", c->name, c->hostname, "invalid name");
return false;
}
from = lookup_node(from_name);
if(!from) {
logger(LOG_ERR, "Got %s from %s (%s) origin %s which does not exist in our connection list",
"REQ_KEY", c->name, c->hostname, from_name);
return false;
return true;
}
to = lookup_node(to_name);
@ -107,7 +121,7 @@ bool req_key_h(connection_t *c) {
if(!to) {
logger(LOG_ERR, "Got %s from %s (%s) destination %s which does not exist in our connection list",
"REQ_KEY", c->name, c->hostname, to_name);
return false;
return true;
}
/* Check if this key request is for us */
@ -116,7 +130,7 @@ bool req_key_h(connection_t *c) {
send_ans_key(from);
} else {
if(tunnelserver)
return false;
return true;
if(!to->status.reachable) {
logger(LOG_WARNING, "Got %s from %s (%s) destination %s which is not reachable",
@ -169,23 +183,30 @@ bool ans_key_h(connection_t *c) {
char from_name[MAX_STRING_SIZE];
char to_name[MAX_STRING_SIZE];
char key[MAX_STRING_SIZE];
char address[MAX_STRING_SIZE] = "";
char port[MAX_STRING_SIZE] = "";
int cipher, digest, maclength, compression;
node_t *from, *to;
if(sscanf(c->buffer, "%*d "MAX_STRING" "MAX_STRING" "MAX_STRING" %d %d %d %d",
if(sscanf(c->buffer, "%*d "MAX_STRING" "MAX_STRING" "MAX_STRING" %d %d %d %d "MAX_STRING" "MAX_STRING,
from_name, to_name, key, &cipher, &digest, &maclength,
&compression) != 7) {
&compression, address, port) < 7) {
logger(LOG_ERR, "Got bad %s from %s (%s)", "ANS_KEY", c->name,
c->hostname);
return false;
}
if(!check_id(from_name) || !check_id(to_name)) {
logger(LOG_ERR, "Got bad %s from %s (%s): %s", "ANS_KEY", c->name, c->hostname, "invalid name");
return false;
}
from = lookup_node(from_name);
if(!from) {
logger(LOG_ERR, "Got %s from %s (%s) origin %s which does not exist in our connection list",
"ANS_KEY", c->name, c->hostname, from_name);
return false;
return true;
}
to = lookup_node(to_name);
@ -193,14 +214,14 @@ bool ans_key_h(connection_t *c) {
if(!to) {
logger(LOG_ERR, "Got %s from %s (%s) destination %s which does not exist in our connection list",
"ANS_KEY", c->name, c->hostname, to_name);
return false;
return true;
}
/* Forward it if necessary */
if(to != myself) {
if(tunnelserver)
return false;
return true;
if(!to->status.reachable) {
logger(LOG_WARNING, "Got %s from %s (%s) destination %s which is not reachable",
@ -208,6 +229,16 @@ bool ans_key_h(connection_t *c) {
return true;
}
if(!*address) {
char *address, *port;
ifdebug(PROTOCOL) logger(LOG_DEBUG, "Appending reflexive UDP address to ANS_KEY from %s to %s", from->name, to->name);
sockaddr2str(&from->address, &address, &port);
send_request(to->nexthop->connection, "%s %s %s", c->buffer, address, port);
free(address);
free(port);
return true;
}
return send_request(to->nexthop->connection, "%s", c->buffer);
}
@ -218,7 +249,6 @@ bool ans_key_h(connection_t *c) {
from->outkeylength = strlen(key) / 2;
hex2bin(key, from->outkey, from->outkeylength);
from->status.waitingforkey = false;
/* Check and lookup cipher and digest algorithms */
if(cipher) {
@ -227,13 +257,13 @@ bool ans_key_h(connection_t *c) {
if(!from->outcipher) {
logger(LOG_ERR, "Node %s (%s) uses unknown cipher!", from->name,
from->hostname);
return false;
return true;
}
if(from->outkeylength != from->outcipher->key_len + from->outcipher->iv_len) {
logger(LOG_ERR, "Node %s (%s) uses wrong keylength!", from->name,
from->hostname);
return false;
return true;
}
} else {
from->outcipher = NULL;
@ -247,13 +277,13 @@ bool ans_key_h(connection_t *c) {
if(!from->outdigest) {
logger(LOG_ERR, "Node %s (%s) uses unknown digest!", from->name,
from->hostname);
return false;
return true;
}
if(from->outmaclength > from->outdigest->md_size || from->outmaclength < 0) {
logger(LOG_ERR, "Node %s (%s) uses bogus MAC length!",
from->name, from->hostname);
return false;
return true;
}
} else {
from->outdigest = NULL;
@ -261,7 +291,7 @@ bool ans_key_h(connection_t *c) {
if(compression < 0 || compression > 11) {
logger(LOG_ERR, "Node %s (%s) uses bogus compression level!", from->name, from->hostname);
return false;
return true;
}
from->outcompression = compression;
@ -270,12 +300,18 @@ bool ans_key_h(connection_t *c) {
if(!EVP_EncryptInit_ex(&from->outctx, from->outcipher, NULL, (unsigned char *)from->outkey, (unsigned char *)from->outkey + from->outcipher->key_len)) {
logger(LOG_ERR, "Error during initialisation of key from %s (%s): %s",
from->name, from->hostname, ERR_error_string(ERR_get_error(), NULL));
return false;
return true;
}
from->status.validkey = true;
from->sent_seqno = 0;
if(*address && *port) {
ifdebug(PROTOCOL) logger(LOG_DEBUG, "Using reflexive UDP address from %s: %s port %s", from->name, address, port);
sockaddr_t sa = str2sockaddr(address, port);
update_node_udp(from, &sa);
}
if(from->options & OPTION_PMTU_DISCOVERY && !from->mtuprobes)
send_mtu_probe(from);

View file

@ -1,7 +1,7 @@
/*
route.c -- routing
Copyright (C) 2000-2005 Ivo Timmermans,
2000-2009 Guus Sliepen <guus@tinc-vpn.org>
2000-2010 Guus Sliepen <guus@tinc-vpn.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@ -48,6 +48,7 @@ static const size_t ip6_size = sizeof(struct ip6_hdr);
static const size_t icmp6_size = sizeof(struct icmp6_hdr);
static const size_t ns_size = sizeof(struct nd_neighbor_solicit);
static const size_t opt_size = sizeof(struct nd_opt_hdr);
#define max(a, b) ((a) > (b) ? (a) : (b))
/* RFC 1071 */
@ -92,6 +93,74 @@ static bool checklength(node_t *source, vpn_packet_t *packet, length_t length) {
return true;
}
static void clamp_mss(const node_t *source, const node_t *via, vpn_packet_t *packet) {
if(!via || via == myself || !(via->options & OPTION_CLAMP_MSS))
return;
/* Find TCP header */
int start = 0;
uint16_t type = packet->data[12] << 8 | packet->data[13];
if(type == ETH_P_IP && packet->data[23] == 6)
start = 14 + (packet->data[14] & 0xf) * 4;
else if(type == ETH_P_IPV6 && packet->data[20] == 6)
start = 14 + 40;
if(!start || packet->len <= start + 20)
return;
/* Use data offset field to calculate length of options field */
int len = ((packet->data[start + 12] >> 4) - 5) * 4;
if(packet->len < start + 20 + len)
return;
/* Search for MSS option header */
for(int i = 0; i < len;) {
if(packet->data[start + 20 + i] == 0)
break;
if(packet->data[start + 20 + i] == 1) {
i++;
continue;
}
if(i > len - 2 || i > len - packet->data[start + 21 + i])
break;
if(packet->data[start + 20 + i] != 2) {
if(packet->data[start + 21 + i] < 2)
break;
i += packet->data[start + 21 + i];
continue;
}
if(packet->data[start + 21] != 4)
break;
/* Found it */
uint16_t oldmss = packet->data[start + 22 + i] << 8 | packet->data[start + 23 + i];
uint16_t newmss = via->mtu - start - 20;
uint16_t csum = packet->data[start + 16] << 8 | packet->data[start + 17];
if(oldmss <= newmss)
break;
ifdebug(TRAFFIC) logger(LOG_INFO, "Clamping MSS of packet from %s to %s to %d", source->name, via->name, newmss);
/* Update the MSS value and the checksum */
packet->data[start + 22 + i] = newmss >> 8;
packet->data[start + 23 + i] = newmss & 0xff;
csum ^= 0xffff;
csum -= oldmss;
csum += newmss;
csum ^= 0xffff;
packet->data[start + 16] = csum >> 8;
packet->data[start + 17] = csum & 0xff;
break;
}
}
static void swap_mac_addresses(vpn_packet_t *packet) {
mac_t tmp;
memcpy(&tmp, &packet->data[0], sizeof tmp);
@ -104,7 +173,7 @@ static void learn_mac(mac_t *address) {
avl_node_t *node;
connection_t *c;
subnet = lookup_subnet_mac(address);
subnet = lookup_subnet_mac(myself, address);
/* If we don't know this MAC address yet, store it */
@ -119,6 +188,7 @@ static void learn_mac(mac_t *address) {
subnet->net.mac.address = *address;
subnet->weight = 10;
subnet_add(myself, subnet);
subnet_update(myself, subnet, true);
/* And tell all other tinc daemons it's our MAC */
@ -154,6 +224,7 @@ void age_subnets(void) {
send_del_subnet(c, s);
}
subnet_update(myself, s, false);
subnet_del(myself, s);
}
}
@ -315,10 +386,10 @@ static void route_ipv4_unicast(node_t *source, vpn_packet_t *packet) {
via = (subnet->owner->via == myself) ? subnet->owner->nexthop : subnet->owner->via;
if(via && packet->len > via->mtu && via != myself) {
if(via && packet->len > max(via->mtu, 590) && via != myself) {
ifdebug(TRAFFIC) logger(LOG_INFO, "Packet for %s (%s) length %d larger than MTU %d", subnet->owner->name, subnet->owner->hostname, packet->len, via->mtu);
if(packet->data[20] & 0x40) {
packet->len = via->mtu;
packet->len = max(via->mtu, 590);
route_ipv4_unreachable(source, packet, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED);
} else {
fragment_ipv4_packet(via, packet);
@ -327,6 +398,8 @@ static void route_ipv4_unicast(node_t *source, vpn_packet_t *packet) {
return;
}
clamp_mss(source, via, packet);
send_packet(subnet->owner, packet);
}
@ -458,13 +531,15 @@ static void route_ipv6_unicast(node_t *source, vpn_packet_t *packet) {
via = (subnet->owner->via == myself) ? subnet->owner->nexthop : subnet->owner->via;
if(via && packet->len > via->mtu && via != myself) {
if(via && packet->len > max(via->mtu, 1294) && via != myself) {
ifdebug(TRAFFIC) logger(LOG_INFO, "Packet for %s (%s) length %d larger than MTU %d", subnet->owner->name, subnet->owner->hostname, packet->len, via->mtu);
packet->len = via->mtu;
packet->len = max(via->mtu, 1294);
route_ipv6_unreachable(source, packet, ICMP6_PACKET_TOO_BIG, 0);
return;
}
clamp_mss(source, via, packet);
send_packet(subnet->owner, packet);
}
@ -705,7 +780,7 @@ static void route_mac(node_t *source, vpn_packet_t *packet) {
/* Lookup destination address */
memcpy(&dest, &packet->data[0], sizeof dest);
subnet = lookup_subnet_mac(&dest);
subnet = lookup_subnet_mac(NULL, &dest);
if(!subnet) {
broadcast_packet(source, packet);
@ -724,7 +799,7 @@ static void route_mac(node_t *source, vpn_packet_t *packet) {
if(via && packet->len > via->mtu && via != myself) {
ifdebug(TRAFFIC) logger(LOG_INFO, "Packet for %s (%s) length %d larger than MTU %d", subnet->owner->name, subnet->owner->hostname, packet->len, via->mtu);
uint16_t type = packet->data[12] << 8 | packet->data[13];
if(type == ETH_P_IP) {
if(type == ETH_P_IP && packet->len > 590) {
if(packet->data[20] & 0x40) {
packet->len = via->mtu;
route_ipv4_unreachable(source, packet, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED);
@ -732,13 +807,15 @@ static void route_mac(node_t *source, vpn_packet_t *packet) {
fragment_ipv4_packet(via, packet);
}
return;
} else if(type == ETH_P_IPV6) {
} else if(type == ETH_P_IPV6 && packet->len > 1294) {
packet->len = via->mtu;
route_ipv6_unreachable(source, packet, ICMP6_PACKET_TOO_BIG, 0);
return;
}
}
clamp_mss(source, via, packet);
send_packet(subnet->owner, packet);
}

View file

@ -1,6 +1,6 @@
/*
subnet.c -- handle subnet lookups and lists
Copyright (C) 2000-2009 Guus Sliepen <guus@tinc-vpn.org>,
Copyright (C) 2000-2010 Guus Sliepen <guus@tinc-vpn.org>,
2000-2005 Ivo Timmermans
This program is free software; you can redistribute it and/or modify
@ -329,8 +329,8 @@ subnet_t *lookup_subnet(const node_t *owner, const subnet_t *subnet) {
return avl_search(owner->subnet_tree, subnet);
}
subnet_t *lookup_subnet_mac(const mac_t *address) {
subnet_t *p, *r = NULL, subnet = {0};
subnet_t *lookup_subnet_mac(const node_t *owner, const mac_t *address) {
subnet_t *p, *r = NULL;
avl_node_t *n;
int i;
@ -339,20 +339,18 @@ subnet_t *lookup_subnet_mac(const mac_t *address) {
for(i = 0; i < 2; i++) {
if(!cache_mac_valid[i])
continue;
if(owner && cache_mac_subnet[i] && cache_mac_subnet[i]->owner != owner)
continue;
if(!memcmp(address, &cache_mac_address[i], sizeof *address))
return cache_mac_subnet[i];
}
// Search all subnets for a matching one
subnet.type = SUBNET_MAC;
subnet.net.mac.address = *address;
subnet.owner = NULL;
for(n = subnet_tree->head; n; n = n->next) {
for(n = owner ? owner->subnet_tree->head : subnet_tree->head; n; n = n->next) {
p = n->data;
if(!p || p->type != subnet.type)
if(!p || p->type != SUBNET_MAC)
continue;
if(!memcmp(address, &p->net.mac.address, sizeof *address)) {
@ -373,7 +371,7 @@ subnet_t *lookup_subnet_mac(const mac_t *address) {
}
subnet_t *lookup_subnet_ipv4(const ipv4_t *address) {
subnet_t *p, *r = NULL, subnet = {0};
subnet_t *p, *r = NULL;
avl_node_t *n;
int i;
@ -388,15 +386,10 @@ subnet_t *lookup_subnet_ipv4(const ipv4_t *address) {
// Search all subnets for a matching one
subnet.type = SUBNET_IPV4;
subnet.net.ipv4.address = *address;
subnet.net.ipv4.prefixlength = 32;
subnet.owner = NULL;
for(n = subnet_tree->head; n; n = n->next) {
p = n->data;
if(!p || p->type != subnet.type)
if(!p || p->type != SUBNET_IPV4)
continue;
if(!maskcmp(address, &p->net.ipv4.address, p->net.ipv4.prefixlength)) {
@ -417,7 +410,7 @@ subnet_t *lookup_subnet_ipv4(const ipv4_t *address) {
}
subnet_t *lookup_subnet_ipv6(const ipv6_t *address) {
subnet_t *p, *r = NULL, subnet = {0};
subnet_t *p, *r = NULL;
avl_node_t *n;
int i;
@ -432,15 +425,10 @@ subnet_t *lookup_subnet_ipv6(const ipv6_t *address) {
// Search all subnets for a matching one
subnet.type = SUBNET_IPV6;
subnet.net.ipv6.address = *address;
subnet.net.ipv6.prefixlength = 128;
subnet.owner = NULL;
for(n = subnet_tree->head; n; n = n->next) {
p = n->data;
if(!p || p->type != subnet.type)
if(!p || p->type != SUBNET_IPV6)
continue;
if(!maskcmp(address, &p->net.ipv6.address, p->net.ipv6.prefixlength)) {
@ -490,7 +478,7 @@ void subnet_update(node_t *owner, subnet_t *subnet, bool up) {
if(!net2str(netstr, sizeof netstr, subnet))
continue;
// Strip the weight from the subnet, and put it in its own environment variable
char *weight = strchr(netstr + 7, '#');
char *weight = strchr(netstr, '#');
if(weight)
*weight++ = 0;
else
@ -507,9 +495,9 @@ void subnet_update(node_t *owner, subnet_t *subnet, bool up) {
execute_script(name, envp);
}
} else {
if(net2str(netstr + 7, sizeof netstr - 7, subnet)) {
if(net2str(netstr, sizeof netstr, subnet)) {
// Strip the weight from the subnet, and put it in its own environment variable
char *weight = strchr(netstr + 7, '#');
char *weight = strchr(netstr, '#');
if(weight)
*weight++ = 0;
else

View file

@ -77,7 +77,7 @@ extern void subnet_update(struct node_t *, subnet_t *, bool);
extern bool net2str(char *, int, const subnet_t *);
extern bool str2net(subnet_t *, const char *);
extern subnet_t *lookup_subnet(const struct node_t *, const subnet_t *);
extern subnet_t *lookup_subnet_mac(const mac_t *);
extern subnet_t *lookup_subnet_mac(const struct node_t *, const mac_t *);
extern subnet_t *lookup_subnet_ipv4(const ipv4_t *);
extern subnet_t *lookup_subnet_ipv6(const ipv6_t *);
extern void dump_subnets(void);

View file

@ -1,7 +1,7 @@
/*
tincd.c -- the main file for tincd
Copyright (C) 1998-2005 Ivo Timmermans
2000-2009 Guus Sliepen <guus@tinc-vpn.org>
2000-2010 Guus Sliepen <guus@tinc-vpn.org>
2008 Max Rijevski <maksuf@gmail.com>
2009 Michael Tokarev <mjt@tls.msk.ru>
@ -500,7 +500,7 @@ int main(int argc, char **argv) {
if(show_version) {
printf("%s version %s (built %s %s, protocol %d)\n", PACKAGE,
VERSION, __DATE__, __TIME__, PROT_CURRENT);
printf("Copyright (C) 1998-2009 Ivo Timmermans, Guus Sliepen and others.\n"
printf("Copyright (C) 1998-2010 Ivo Timmermans, Guus Sliepen and others.\n"
"See the AUTHORS file for a complete list.\n\n"
"tinc comes with ABSOLUTELY NO WARRANTY. This is free software,\n"
"and you are welcome to redistribute it under certain conditions;\n"