Import Upstream version 1.1~pre17

doc/sample-config/hosts/alpha

@@ -0,0 +1,15 @@
+# Sample host configuration file
+
+# The real IP address of this tinc host. Can be used by other tinc hosts.
+Address = 123.234.35.67
+
+# Portnumber for incoming connections. Default is 655.
+Port = 655
+
+# Subnet on the virtual private network that is local for this host.
+Subnet = 192.168.1.0/24
+
+# The public key generated by `tincd -n example -K' is stored here
+-----BEGIN RSA PUBLIC KEY-----
+...
+-----END RSA PUBLIC KEY-----

doc/sample-config/hosts/beta

@@ -0,0 +1,16 @@
+# Sample host configuration file
+# This file was generated by host beta.
+
+# The real IP address of this tinc host. Can be used by other tinc hosts.
+Address = 123.45.67.189
+
+# Portnumber for incoming connections. Default is 655.
+Port = 6500
+
+# Subnet on the virtual private network that is local for this host.
+Subnet = 192.168.2.0/24
+
+# The public key generated by `tincd -n example -K' is stored here
+-----BEGIN RSA PUBLIC KEY-----
+...
+-----END RSA PUBLIC KEY-----

doc/sample-config/rsa_key.priv

@@ -0,0 +1 @@
+# Generate this file with `tincd -n example -K`

doc/sample-config/tinc-down

@@ -0,0 +1,4 @@
+#!/bin/sh
+# This file closes down the tap device.
+
+ifconfig $INTERFACE down

doc/sample-config/tinc-up

@@ -0,0 +1,11 @@
+#!/bin/sh
+# This file sets up the tap device.
+# It gives you the freedom to do anything you want with it.
+# Use the correct name for the tap device:
+# The environment variable $INTERFACE is set to the right name
+# on most platforms, but if it doesn't work try to set it manually.
+
+# Give it the right ip and netmask. Remember, the subnet of the
+# tap device must be larger than that of the individual Subnets
+# as defined in the host configuration file!
+ifconfig $INTERFACE 192.168.1.1 netmask 255.255.0.0

doc/sample-config/tinc.conf

@@ -0,0 +1,22 @@
+# Sample tinc configuration file
+
+# This is a comment.
+# Spaces and tabs are eliminated.
+# The = sign isn't strictly necessary any longer, though you may want
+# to leave it in as it improves readability :)
+# Variable names are treated case insensitive.
+
+# The name of this tinc host. Required.
+Name = alpha
+
+# The internet host to connect with.
+# Comment these out to make yourself a listen-only connection
+# You must use the name of another tinc host.
+# May be used multiple times for redundance.
+ConnectTo = beta
+
+# The tap device tinc will use.
+# Default is /dev/tap0 for ethertap or FreeBSD,
+# /dev/tun0 for Solaris and OpenBSD,
+# and /dev/net/tun for Linux tun/tap device.
+Device = /dev/net/tun