382 lines
18 KiB
C
382 lines
18 KiB
C
/*
|
|
* bcmxcp.h -- header for BCM/XCP module
|
|
*/
|
|
|
|
#ifndef _POWERWARE_H
|
|
#define _POWERWARE_H
|
|
|
|
#include "timehead.h"
|
|
|
|
#define PW_MAX_TRY 3 /* How many times we try to send data. */
|
|
|
|
#define PW_COMMAND_START_BYTE (unsigned char)0xAB
|
|
#define PW_LAST_SEQ (unsigned char)0x80 /* bit flag to indicate final sequence */
|
|
#define PW_SEQ_MASK (unsigned char)0x7F /* bit mask to extract just the sequence # */
|
|
|
|
#define PW_ANSWER_MAX_SIZE 256
|
|
|
|
/* No Autorisation required */
|
|
#define PW_ID_BLOCK_REQ (unsigned char)0x31 /* Model name, ... length 1 */
|
|
#define PW_STATUS_REQ (unsigned char)0x33 /* On Line, On Bypass, ... length 1-2 */
|
|
#define PW_METER_BLOCK_REQ (unsigned char)0x34 /* Current UPS status (Load, utility,...) length 1 */
|
|
#define PW_CUR_ALARM_REQ (unsigned char)0x35 /* Current alarm and event request. length 1 */
|
|
#define PW_CONFIG_BLOC_REQ (unsigned char)0x36 /* Model serial#, ... length 1 */
|
|
#define PW_BAT_TEST_REQ (unsigned char)0x3B /* Charging, floating, ... length 1 */
|
|
#define PW_LIMIT_BLOCK_REQ (unsigned char)0x3C /* Configuration (Bypass thresholds,...). length 1 */
|
|
#define PW_TEST_RESULT_REQ (unsigned char)0x3F /* ??. length 1 */
|
|
#define PW_COMMAND_LIST_REQ (unsigned char)0x40 /* Available commands. length 1 */
|
|
#define PW_OUT_MON_BLOCK_REQ (unsigned char)0x41 /* Outlet monitor request length 1 */
|
|
#define PW_COM_CAP_REQ (unsigned char)0x42 /* Request communication capabilities. length 2 */
|
|
#define PW_UPS_TOP_DATA_REQ (unsigned char)0x43 /* Requsest ups topology data requset. length 1 */
|
|
|
|
/* Need autorisation before this commands */
|
|
#define PW_UPS_ON (unsigned char)0x89 /* UPS on command. length 1-2 */
|
|
#define PW_LOAD_OFF_RESTART (unsigned char)0x8A /* Delayed LoadPowerOff & Restart command. length 2-4 */
|
|
#define PW_UPS_OFF (unsigned char)0x8B /* UPS off command. length 1-2 */
|
|
#define PW_UPS_ON_TIME (unsigned char)0x91 /* Scheduled UPS on in n minutes. length 3-4 */
|
|
#define PW_UPS_OFF_TIME (unsigned char)0x93 /* Scheduled UPS off in n minutes. length 3-4 */
|
|
#define PW_SET_CONF_COMMAND (unsigned char)0x95 /* Set configuration command. length 4 */
|
|
#define PW_SET_OUTLET_COMMAND (unsigned char)0x97 /* Set outlet parameter command length 5. not in 5115 */
|
|
#define PW_SET_COM_COMMAND (unsigned char)0x98 /* Set communication parameter command. length 5 */
|
|
#define PW_SET_REQ_ONLY_MODE (unsigned char)0xA0 /* Set request only mode command. length 1 */
|
|
#define PW_INIT_BAT_TEST (unsigned char)0xB1 /* Initiate battery test command. length 3 */
|
|
#define PW_INIT_SYS_TEST (unsigned char)0xB2 /* Initiate general system test command. length 2 */
|
|
|
|
/* Define the XCP ACK block responses */
|
|
#define XCPRESP_ACK 0x31 /* Accepted and executed */
|
|
#define XCPRESP_NOT_IMPL 0x32 /* Recognized, but not implemented */
|
|
#define XCPRESP_BUSY 0x33 /* Recognized, but Busy and not executed */
|
|
#define XCPRESP_UNRECOGN 0x34 /* Unrecognized cmd */
|
|
#define XCPRESP_OUT_RANGE 0x35 /* Parameter was out of range; not executed */
|
|
#define XCPRESP_PRM_INVLD 0x36 /* Parameter invalid; not executed */
|
|
#define XCPRESP_PRM_ADJST 0x37 /* Parameter adjusted to nearest good value */
|
|
#define XCPRESP_PRM_RDONLY 0x38 /* Parameter is Read-only - cannot be written (at this privilege level) */
|
|
|
|
/* Outlet operations */
|
|
#define PW_ALL_OUTLETS 0
|
|
#define PW_AUTO_OFF_DELAY 1
|
|
#define PW_AUTO_ON_DELAY 2
|
|
/* 0 means Abort countdown */
|
|
#define PW_TURN_OFF_DELAY 3
|
|
#define PW_TURN_ON_DELAY 4
|
|
|
|
/* Config block offsets */
|
|
#define BCMXCP_CONFIG_BLOCK_MACHINE_TYPE_CODE 0
|
|
#define BCMXCP_CONFIG_BLOCK_MODEL_NUMBER 2
|
|
#define BCMXCP_CONFIG_BLOCK_MODEL_CONF_WORD 4
|
|
#define BCMXCP_CONFIG_BLOCK_INPUT_FREQ_DEV_LIMIT 6
|
|
#define BCMXCP_CONFIG_BLOCK_NOMINAL_OUTPUT_VOLTAGE 8
|
|
#define BCMXCP_CONFIG_BLOCK_NOMINAL_OUTPUT_FREQ 10
|
|
#define BCMXCP_CONFIG_BLOCK_OUTPUT_PHASE_ANGLE 12
|
|
#define BCMXCP_CONFIG_BLOCK_HW_MODULES_INSTALLED_WORD1 14
|
|
#define BCMXCP_CONFIG_BLOCK_HW_MODULES_INSTALLED_BYTE3 16 /* KEEP THIS UNTILL PARSING OK. USE THIS BYTE. */
|
|
#define BCMXCP_CONFIG_BLOCK_HW_MODULES_INSTALLED_WORD2 16
|
|
#define BCMXCP_CONFIG_BLOCK_HW_MODULES_INSTALLED_WORD3 18
|
|
#define BCMXCP_CONFIG_BLOCK_HW_MODULES_INSTALLED_WORD4 20
|
|
#define BCMXCP_CONFIG_BLOCK_BATTERY_DATA_WORD1 22 /* Undefined at this time.*/
|
|
#define BCMXCP_CONFIG_BLOCK_BATTERY_DATA_WORD2 24 /* Per cell inverter shutdown voltage at full rated load. (volt/cell)* 100 */
|
|
#define BCMXCP_CONFIG_BLOCK_BATTERY_DATA_WORD3 26 /* LOW BYTE Number of battery strings. HIGH BYTE undefined at this time.*/
|
|
#define BCMXCP_CONFIG_BLOCK_EXTENDED_BLOCK_LENGTH 47
|
|
#define BCMXCP_CONFIG_BLOCK_SERIAL_NUMBER 64
|
|
|
|
/* Index for Extende Limits block offsets */
|
|
#define BCMXCP_EXT_LIMITS_BLOCK_NOMINAL_INPUT_VOLTAGE 0
|
|
#define BCMXCP_EXT_LIMITS_BLOCK_NOMINAL_INPUT_FREQ 2
|
|
#define BCMXCP_EXT_LIMITS_BLOCK_NOMINAL_TRUE_POWER 4
|
|
#define BCMXCP_EXT_LIMITS_BLOCK_COMM_SPEC_VERSION 6
|
|
#define BCMXCP_EXT_LIMITS_BLOCK_FREQ_DEV_LIMIT 8
|
|
#define BCMXCP_EXT_LIMITS_BLOCK_VOLTAGE_LOW_DEV_LIMIT 10
|
|
#define BCMXCP_EXT_LIMITS_BLOCK_VOLTAGE_HIGE_DEV_LIMIT 12
|
|
#define BCMXCP_EXT_LIMITS_BLOCK_PHASE_DEV_LIMIT 14
|
|
#define BCMXCP_EXT_LIMITS_BLOCK_LOW_BATT_WARNING 16
|
|
#define BCMXCP_EXT_LIMITS_BLOCK_HORN_STATUS 17
|
|
#define BCMXCP_EXT_LIMITS_BLOCK_MIN_INPUT_VOLTAGE 18
|
|
#define BCMXCP_EXT_LIMITS_BLOCK_MAX_INPUT_VOLTAGE 20
|
|
#define BCMXCP_EXT_LIMITS_BLOCK_RETURN_STAB_DELAY 22
|
|
#define BCMXCP_EXT_LIMITS_BLOCK_BATT_CAPACITY_RETURN 24
|
|
#define BCMXCP_EXT_LIMITS_BLOCK_AMBIENT_TEMP_LOW 25
|
|
#define BCMXCP_EXT_LIMITS_BLOCK_AMBIENT_TEMP_HIGE 26
|
|
|
|
/* Meter map offsets used */
|
|
#define BCMXCP_METER_MAP_OUTPUT_VA 23
|
|
#define BCMXCP_METER_MAP_LOAD_CURR_PHASE_A 65
|
|
#define BCMXCP_METER_MAP_LOAD_CURR_PHASE_A_BAR_CHART 68
|
|
#define BCMXCP_METER_MAP_OUTPUT_VA_BAR_CHART 71
|
|
|
|
/* Indexes for alarm map */
|
|
#define BCMXCP_ALARM_INVERTER_AC_OVER_VOLTAGE 0
|
|
#define BCMXCP_ALARM_INVERTER_AC_UNDER_VOLTAGE 1
|
|
#define BCMXCP_ALARM_INVERTER_OVER_OR_UNDER_FREQ 2
|
|
#define BCMXCP_ALARM_BYPASS_AC_OVER_VOLTAGE 3
|
|
#define BCMXCP_ALARM_BYPASS_AC_UNDER_VOLTAGE 4
|
|
#define BCMXCP_ALARM_BYPASS_OVER_OR_UNDER_FREQ 5
|
|
#define BCMXCP_ALARM_INPUT_AC_OVER_VOLTAGE 6
|
|
#define BCMXCP_ALARM_INPUT_AC_UNDER_VOLTAGE 7
|
|
#define BCMXCP_ALARM_INPUT_UNDER_OR_OVER_FREQ 8
|
|
#define BCMXCP_ALARM_OUTPUT_OVER_VOLTAGE 9
|
|
#define BCMXCP_ALARM_OUTPUT_UNDER_VOLTAGE 10
|
|
#define BCMXCP_ALARM_OUTPUT_UNDER_OR_OVER_FREQ 11
|
|
#define BCMXCP_ALARM_REMOTE_EMERGENCY_PWR_OFF 12
|
|
#define BCMXCP_ALARM_REMOTE_GO_TO_BYPASS 13
|
|
#define BCMXCP_ALARM_BUILDING_ALARM_6 14
|
|
#define BCMXCP_ALARM_BUILDING_ALARM_5 15
|
|
#define BCMXCP_ALARM_BUILDING_ALARM_4 16
|
|
#define BCMXCP_ALARM_BUILDING_ALARM_3 17
|
|
#define BCMXCP_ALARM_BUILDING_ALARM_2 18
|
|
#define BCMXCP_ALARM_BUILDING_ALARM_1 19
|
|
#define BCMXCP_ALARM_STATIC_SWITCH_OVER_TEMP 20
|
|
#define BCMXCP_ALARM_CHARGER_OVER_TEMP 21
|
|
#define BCMXCP_ALARM_CHARGER_LOGIC_PWR_FAIL 22
|
|
#define BCMXCP_ALARM_CHARGER_OVER_VOLTAGE_OR_CURRENT 23
|
|
#define BCMXCP_ALARM_INVERTER_OVER_TEMP 24
|
|
#define BCMXCP_ALARM_OUTPUT_OVERLOAD 25
|
|
#define BCMXCP_ALARM_RECTIFIER_INPUT_OVER_CURRENT 26
|
|
#define BCMXCP_ALARM_INVERTER_OUTPUT_OVER_CURRENT 27
|
|
#define BCMXCP_ALARM_DC_LINK_OVER_VOLTAGE 28
|
|
#define BCMXCP_ALARM_DC_LINK_UNDER_VOLTAGE 29
|
|
#define BCMXCP_ALARM_RECTIFIER_FAILED 30
|
|
#define BCMXCP_ALARM_INVERTER_FAULT 31
|
|
#define BCMXCP_ALARM_BATTERY_CONNECTOR_FAIL 32
|
|
#define BCMXCP_ALARM_BYPASS_BREAKER_FAIL 33
|
|
#define BCMXCP_ALARM_CHARGER_FAIL 34
|
|
#define BCMXCP_ALARM_RAMP_UP_FAILED 35
|
|
#define BCMXCP_ALARM_STATIC_SWITCH_FAILED 36
|
|
#define BCMXCP_ALARM_ANALOG_AD_REF_FAIL 37
|
|
#define BCMXCP_ALARM_BYPASS_UNCALIBRATED 38
|
|
#define BCMXCP_ALARM_RECTIFIER_UNCALIBRATED 39
|
|
#define BCMXCP_ALARM_OUTPUT_UNCALIBRATED 40
|
|
#define BCMXCP_ALARM_INVERTER_UNCALIBRATED 41
|
|
#define BCMXCP_ALARM_DC_VOLT_UNCALIBRATED 42
|
|
#define BCMXCP_ALARM_OUTPUT_CURRENT_UNCALIBRATED 43
|
|
#define BCMXCP_ALARM_RECTIFIER_CURRENT_UNCALIBRATED 44
|
|
#define BCMXCP_ALARM_BATTERY_CURRENT_UNCALIBRATED 45
|
|
#define BCMXCP_ALARM_INVERTER_ON_OFF_STAT_FAIL 46
|
|
#define BCMXCP_ALARM_BATTERY_CURRENT_LIMIT 47
|
|
#define BCMXCP_ALARM_INVERTER_STARTUP_FAIL 48
|
|
#define BCMXCP_ALARM_ANALOG_BOARD_AD_STAT_FAIL 49
|
|
#define BCMXCP_ALARM_OUTPUT_CURRENT_OVER_100 50
|
|
#define BCMXCP_ALARM_BATTERY_GROUND_FAULT 51
|
|
#define BCMXCP_ALARM_WAITING_FOR_CHARGER_SYNC 52
|
|
#define BCMXCP_ALARM_NV_RAM_FAIL 53
|
|
#define BCMXCP_ALARM_ANALOG_BOARD_AD_TIMEOUT 54
|
|
#define BCMXCP_ALARM_SHUTDOWN_IMMINENT 55
|
|
#define BCMXCP_ALARM_BATTERY_LOW 56
|
|
#define BCMXCP_ALARM_UTILITY_FAIL 57
|
|
#define BCMXCP_ALARM_OUTPUT_SHORT_CIRCUIT 58
|
|
#define BCMXCP_ALARM_UTILITY_NOT_PRESENT 59
|
|
#define BCMXCP_ALARM_FULL_TIME_CHARGING 60
|
|
#define BCMXCP_ALARM_FAST_BYPASS_COMMAND 61
|
|
#define BCMXCP_ALARM_AD_ERROR 62
|
|
#define BCMXCP_ALARM_INTERNAL_COM_FAIL 63
|
|
#define BCMXCP_ALARM_RECTIFIER_SELFTEST_FAIL 64
|
|
#define BCMXCP_ALARM_RECTIFIER_EEPROM_FAIL 65
|
|
#define BCMXCP_ALARM_RECTIFIER_EPROM_FAIL 66
|
|
#define BCMXCP_ALARM_INPUT_LINE_VOLTAGE_LOSS 67
|
|
#define BCMXCP_ALARM_BATTERY_DC_OVER_VOLTAGE 68
|
|
#define BCMXCP_ALARM_POWER_SUPPLY_OVER_TEMP 69
|
|
#define BCMXCP_ALARM_POWER_SUPPLY_FAIL 70
|
|
#define BCMXCP_ALARM_POWER_SUPPLY_5V_FAIL 71
|
|
#define BCMXCP_ALARM_POWER_SUPPLY_12V_FAIL 72
|
|
#define BCMXCP_ALARM_HEATSINK_OVER_TEMP 73
|
|
#define BCMXCP_ALARM_HEATSINK_TEMP_SENSOR_FAIL 74
|
|
#define BCMXCP_ALARM_RECTIFIER_CURRENT_OVER_125 75
|
|
#define BCMXCP_ALARM_RECTIFIER_FAULT_INTERRUPT_FAIL 76
|
|
#define BCMXCP_ALARM_RECTIFIER_POWER_CAPASITOR_FAIL 77
|
|
#define BCMXCP_ALARM_INVERTER_PROGRAM_STACK_ERROR 78
|
|
#define BCMXCP_ALARM_INVERTER_BOARD_SELFTEST_FAIL 79
|
|
#define BCMXCP_ALARM_INVERTER_AD_SELFTEST_FAIL 80
|
|
#define BCMXCP_ALARM_INVERTER_RAM_SELFTEST_FAIL 81
|
|
#define BCMXCP_ALARM_NV_MEMORY_CHECKSUM_FAIL 82
|
|
#define BCMXCP_ALARM_PROGRAM_CHECKSUM_FAIL 83
|
|
#define BCMXCP_ALARM_INVERTER_CPU_SELFTEST_FAIL 84
|
|
#define BCMXCP_ALARM_NETWORK_NOT_RESPONDING 85
|
|
#define BCMXCP_ALARM_FRONT_PANEL_SELFTEST_FAIL 86
|
|
#define BCMXCP_ALARM_NODE_EEPROM_VERIFICATION_ERROR 87
|
|
#define BCMXCP_ALARM_OUTPUT_AC_OVER_VOLT_TEST_FAIL 88
|
|
#define BCMXCP_ALARM_OUTPUT_DC_OVER_VOLTAGE 89
|
|
#define BCMXCP_ALARM_INPUT_PHASE_ROTATION_ERROR 90
|
|
#define BCMXCP_ALARM_INVERTER_RAMP_UP_TEST_FAILED 91
|
|
#define BCMXCP_ALARM_INVERTER_OFF_COMMAND 92
|
|
#define BCMXCP_ALARM_INVERTER_ON_COMMAND 93
|
|
#define BCMXCP_ALARM_TO_BYPASS_COMMAND 94
|
|
#define BCMXCP_ALARM_FROM_BYPASS_COMMAND 95
|
|
#define BCMXCP_ALARM_AUTO_MODE_COMMAND 96
|
|
#define BCMXCP_ALARM_EMERGENCY_SHUTDOWN_COMMAND 97
|
|
#define BCMXCP_ALARM_SETUP_SWITCH_OPEN 98
|
|
#define BCMXCP_ALARM_INVERTER_OVER_VOLT_INT 99
|
|
#define BCMXCP_ALARM_INVERTER_UNDER_VOLT_INT 100
|
|
#define BCMXCP_ALARM_ABSOLUTE_DCOV_ACOV 101
|
|
#define BCMXCP_ALARM_PHASE_A_CURRENT_LIMIT 102
|
|
#define BCMXCP_ALARM_PHASE_B_CURRENT_LIMIT 103
|
|
#define BCMXCP_ALARM_PHASE_C_CURRENT_LIMIT 104
|
|
#define BCMXCP_ALARM_BYPASS_NOT_AVAILABLE 105
|
|
#define BCMXCP_ALARM_RECTIFIER_BREAKER_OPEN 106
|
|
#define BCMXCP_ALARM_BATTERY_CONTACTOR_OPEN 107
|
|
#define BCMXCP_ALARM_INVERTER_CONTACTOR_OPEN 108
|
|
#define BCMXCP_ALARM_BYPASS_BREAKER_OPEN 109
|
|
#define BCMXCP_ALARM_INV_BOARD_ACOV_INT_TEST_FAIL 110
|
|
#define BCMXCP_ALARM_INVERTER_OVER_TEMP_TRIP 111
|
|
#define BCMXCP_ALARM_INV_BOARD_ACUV_INT_TEST_FAIL 112
|
|
#define BCMXCP_ALARM_INVERTER_VOLTAGE_FEEDBACK_ERROR 113
|
|
#define BCMXCP_ALARM_DC_UNDER_VOLTAGE_TIMEOUT 114
|
|
#define BCMXCP_ALARM_AC_UNDER_VOLTAGE_TIMEOUT 115
|
|
#define BCMXCP_ALARM_DC_UNDER_VOLTAGE_WHILE_CHARGE 116
|
|
#define BCMXCP_ALARM_INVERTER_VOLTAGE_BIAS_ERROR 117
|
|
#define BCMXCP_ALARM_RECTIFIER_PHASE_ROTATION 118
|
|
#define BCMXCP_ALARM_BYPASS_PHASER_ROTATION 119
|
|
#define BCMXCP_ALARM_SYSTEM_INTERFACE_BOARD_FAIL 120
|
|
#define BCMXCP_ALARM_PARALLEL_BOARD_FAIL 121
|
|
#define BCMXCP_ALARM_LOST_LOAD_SHARING_PHASE_A 122
|
|
#define BCMXCP_ALARM_LOST_LOAD_SHARING_PHASE_B 123
|
|
#define BCMXCP_ALARM_LOST_LOAD_SHARING_PHASE_C 124
|
|
#define BCMXCP_ALARM_DC_OVER_VOLTAGE_TIMEOUT 125
|
|
#define BCMXCP_ALARM_BATTERY_TOTALLY_DISCHARGED 126
|
|
#define BCMXCP_ALARM_INVERTER_PHASE_BIAS_ERROR 127
|
|
#define BCMXCP_ALARM_INVERTER_VOLTAGE_BIAS_ERROR_2 128
|
|
#define BCMXCP_ALARM_DC_LINK_BLEED_COMPLETE 129
|
|
#define BCMXCP_ALARM_LARGE_CHARGER_INPUT_CURRENT 130
|
|
#define BCMXCP_ALARM_INV_VOLT_TOO_LOW_FOR_RAMP_LEVEL 131
|
|
#define BCMXCP_ALARM_LOSS_OF_REDUNDANCY 132
|
|
#define BCMXCP_ALARM_LOSS_OF_SYNC_BUS 133
|
|
#define BCMXCP_ALARM_RECTIFIER_BREAKER_SHUNT_TRIP 134
|
|
#define BCMXCP_ALARM_LOSS_OF_CHARGER_SYNC 135
|
|
#define BCMXCP_ALARM_INVERTER_LOW_LEVEL_TEST_TIMEOUT 136
|
|
#define BCMXCP_ALARM_OUTPUT_BREAKER_OPEN 137
|
|
#define BCMXCP_ALARM_CONTROL_POWER_ON 138
|
|
#define BCMXCP_ALARM_INVERTER_ON 139
|
|
#define BCMXCP_ALARM_CHARGER_ON 140
|
|
#define BCMXCP_ALARM_BYPASS_ON 141
|
|
#define BCMXCP_ALARM_BYPASS_POWER_LOSS 142
|
|
#define BCMXCP_ALARM_ON_MANUAL_BYPASS 143
|
|
#define BCMXCP_ALARM_BYPASS_MANUAL_TURN_OFF 144
|
|
#define BCMXCP_ALARM_INVERTER_BLEEDING_DC_LINK_VOLT 145
|
|
#define BCMXCP_ALARM_CPU_ISR_ERROR 146
|
|
#define BCMXCP_ALARM_SYSTEM_ISR_RESTART 147
|
|
#define BCMXCP_ALARM_PARALLEL_DC 148
|
|
#define BCMXCP_ALARM_BATTERY_NEEDS_SERVICE 149
|
|
#define BCMXCP_ALARM_BATTERY_CHARGING 150
|
|
#define BCMXCP_ALARM_BATTERY_NOT_CHARGED 151
|
|
#define BCMXCP_ALARM_DISABLED_BATTERY_TIME 152
|
|
#define BCMXCP_ALARM_SERIES_7000_ENABLE 153
|
|
#define BCMXCP_ALARM_OTHER_UPS_ON 154
|
|
#define BCMXCP_ALARM_PARALLEL_INVERTER 155
|
|
#define BCMXCP_ALARM_UPS_IN_PARALLEL 156
|
|
#define BCMXCP_ALARM_OUTPUT_BREAKER_REALY_FAIL 157
|
|
#define BCMXCP_ALARM_CONTROL_POWER_OFF 158
|
|
#define BCMXCP_ALARM_LEVEL_2_OVERLOAD_PHASE_A 159
|
|
#define BCMXCP_ALARM_LEVEL_2_OVERLOAD_PHASE_B 160
|
|
#define BCMXCP_ALARM_LEVEL_2_OVERLOAD_PHASE_C 161
|
|
#define BCMXCP_ALARM_LEVEL_3_OVERLOAD_PHASE_A 162
|
|
#define BCMXCP_ALARM_LEVEL_3_OVERLOAD_PHASE_B 163
|
|
#define BCMXCP_ALARM_LEVEL_3_OVERLOAD_PHASE_C 164
|
|
#define BCMXCP_ALARM_LEVEL_4_OVERLOAD_PHASE_A 165
|
|
#define BCMXCP_ALARM_LEVEL_4_OVERLOAD_PHASE_B 166
|
|
#define BCMXCP_ALARM_LEVEL_4_OVERLOAD_PHASE_C 167
|
|
#define BCMXCP_ALARM_UPS_ON_BATTERY 168
|
|
#define BCMXCP_ALARM_UPS_ON_BYPASS 169
|
|
#define BCMXCP_ALARM_LOAD_DUMPED 170
|
|
#define BCMXCP_ALARM_LOAD_ON_INVERTER 171
|
|
#define BCMXCP_ALARM_UPS_ON_COMMAND 172
|
|
#define BCMXCP_ALARM_UPS_OFF_COMMAND 173
|
|
#define BCMXCP_ALARM_LOW_BATTERY_SHUTDOWN 174
|
|
#define BCMXCP_ALARM_AUTO_ON_ENABLED 175
|
|
#define BCMXCP_ALARM_SOFTWARE_INCOMPABILITY_DETECTED 176
|
|
#define BCMXCP_ALARM_INVERTER_TEMP_SENSOR_FAILED 177
|
|
#define BCMXCP_ALARM_DC_START_OCCURED 178
|
|
#define BCMXCP_ALARM_IN_PARALLEL_OPERATION 179
|
|
#define BCMXCP_ALARM_SYNCING_TO_BYPASS 180
|
|
#define BCMXCP_ALARM_RAMPING_UPS_UP 181
|
|
#define BCMXCP_ALARM_INVERTER_ON_DELAY 182
|
|
#define BCMXCP_ALARM_CHARGER_ON_DELAY 183
|
|
#define BCMXCP_ALARM_WAITING_FOR_UTIL_INPUT 184
|
|
#define BCMXCP_ALARM_CLOSE_BYPASS_BREAKER 185
|
|
#define BCMXCP_ALARM_TEMPORARY_BYPASS_OPERATION 186
|
|
#define BCMXCP_ALARM_SYNCING_TO_OUTPUT 187
|
|
#define BCMXCP_ALARM_BYPASS_FAILURE 188
|
|
#define BCMXCP_ALARM_AUTO_OFF_COMMAND_EXECUTED 189
|
|
#define BCMXCP_ALARM_AUTO_ON_COMMAND_EXECUTED 190
|
|
#define BCMXCP_ALARM_BATTERY_TEST_FAILED 191
|
|
#define BCMXCP_ALARM_FUSE_FAIL 192
|
|
#define BCMXCP_ALARM_FAN_FAIL 193
|
|
#define BCMXCP_ALARM_SITE_WIRING_FAULT 194
|
|
#define BCMXCP_ALARM_BACKFEED_CONTACTOR_FAIL 195
|
|
#define BCMXCP_ALARM_ON_BUCK 196
|
|
#define BCMXCP_ALARM_ON_BOOST 197
|
|
#define BCMXCP_ALARM_ON_DOUBLE_BOOST 198
|
|
#define BCMXCP_ALARM_BATTERIES_DISCONNECTED 199
|
|
#define BCMXCP_ALARM_UPS_CABINET_OVER_TEMP 200
|
|
#define BCMXCP_ALARM_TRANSFORMER_OVER_TEMP 201
|
|
#define BCMXCP_ALARM_AMBIENT_UNDER_TEMP 202
|
|
#define BCMXCP_ALARM_AMBIENT_OVER_TEMP 203
|
|
#define BCMXCP_ALARM_CABINET_DOOR_OPEN 204
|
|
#define BCMXCP_ALARM_CABINET_DOOR_OPEN_VOLT_PRESENT 205
|
|
#define BCMXCP_ALARM_AUTO_SHUTDOWN_PENDING 206
|
|
#define BCMXCP_ALARM_TAP_SWITCHING_REALY_PENDING 207
|
|
#define BCMXCP_ALARM_UNABLE_TO_CHARGE_BATTERIES 208
|
|
#define BCMXCP_ALARM_STARTUP_FAILURE_CHECK_EPO 209
|
|
#define BCMXCP_ALARM_AUTOMATIC_STARTUP_PENDING 210
|
|
#define BCMXCP_ALARM_MODEM_FAILED 211
|
|
#define BCMXCP_ALARM_INCOMING_MODEM_CALL_STARTED 212
|
|
#define BCMXCP_ALARM_OUTGOING_MODEM_CALL_STARTED 213
|
|
#define BCMXCP_ALARM_MODEM_CONNECTION_ESTABLISHED 214
|
|
#define BCMXCP_ALARM_MODEM_CALL_COMPLETED_SUCCESS 215
|
|
#define BCMXCP_ALARM_MODEM_CALL_COMPLETED_FAIL 216
|
|
#define BCMXCP_ALARM_INPUT_BREAKER_FAIL 217
|
|
#define BCMXCP_ALARM_SYSINIT_IN_PROGRESS 218
|
|
#define BCMXCP_ALARM_AUTOCALIBRATION_FAIL 219
|
|
#define BCMXCP_ALARM_SELECTIVE_TRIP_OF_MODULE 220
|
|
#define BCMXCP_ALARM_INVERTER_OUTPUT_FAILURE 221
|
|
#define BCMXCP_ALARM_ABNORMAL_OUTPUT_VOLT_AT_STARTUP 222
|
|
#define BCMXCP_ALARM_RECTIFIER_OVER_TEMP 223
|
|
#define BCMXCP_ALARM_CONFIG_ERROR 224
|
|
#define BCMXCP_ALARM_REDUNDANCY_LOSS_DUE_TO_OVERLOAD 225
|
|
#define BCMXCP_ALARM_ON_ALTERNATE_AC_SOURCE 226
|
|
#define BCMXCP_ALARM_IN_HIGH_EFFICIENCY_MODE 227
|
|
#define BCMXCP_ALARM_SYSTEM_NOTICE_ACTIVE 228
|
|
#define BCMXCP_ALARM_SYSTEM_ALARM_ACTIVE 229
|
|
#define BCMXCP_ALARM_ALTERNATE_POWER_SOURCE_NOT_AVAILABLE 230
|
|
#define BCMXCP_ALARM_CURRENT_BALANCE_FAILURE 231
|
|
#define BCMXCP_ALARM_CHECK_AIR_FILTER 232
|
|
#define BCMXCP_ALARM_SUBSYSTEM_NOTICE_ACTIVE 233
|
|
#define BCMXCP_ALARM_SUBSYSTEM_ALARM_ACTIVE 234
|
|
#define BCMXCP_ALARM_CHARGER_ON_COMMAND 235
|
|
#define BCMXCP_ALARM_CHARGER_OFF_COMMAND 236
|
|
#define BCMXCP_ALARM_UPS_NORMAL 237
|
|
#define BCMXCP_ALARM_EXTERNAL_COMMUNICATION_FAILURE 238
|
|
|
|
#define BCMXCP_METER_MAP_MAX 91 /* Max no of entries in BCM/XCP meter map */
|
|
#define BCMXCP_ALARM_MAP_MAX 240 /* Max no of entries in BCM/XCP alarm map (adjusted upwards to nearest multi of 8 */
|
|
|
|
typedef struct { /* Entry in BCM/XCP - UPS - NUT mapping table */
|
|
const char *nut_entity; /* The NUT variable name */
|
|
unsigned char format; /* The format of the data - float, long etc */
|
|
unsigned int meter_block_index; /* The position of this meter in the UPS meter block */
|
|
} BCMXCP_METER_MAP_ENTRY_t;
|
|
|
|
BCMXCP_METER_MAP_ENTRY_t
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_MAX];
|
|
|
|
typedef struct { /* Entry in BCM/XCP - UPS mapping table */
|
|
int alarm_block_index; /* Index of this alarm in alarm block. -1 = not existing */
|
|
const char *alarm_desc; /* Description of this alarm */
|
|
} BCMXCP_ALARM_MAP_ENTRY_t;
|
|
|
|
BCMXCP_ALARM_MAP_ENTRY_t
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_MAP_MAX];
|
|
|
|
typedef struct { /* A place to store status info and other data not for NUT */
|
|
unsigned char topology_mask; /* Configuration block byte 16, masks valid status bits */
|
|
unsigned int lowbatt; /* Seconds of runtime left left when LB alarm is set */
|
|
unsigned int shutdowndelay; /* Shutdown delay in seconds, from ups.conf */
|
|
int alarm_on_battery; /* On Battery alarm active? */
|
|
int alarm_low_battery; /* Battery Low alarm active? */
|
|
} BCMXCP_STATUS_t;
|
|
|
|
BCMXCP_STATUS_t
|
|
bcmxcp_status;
|
|
|
|
int checksum_test(const unsigned char*);
|
|
unsigned char calc_checksum(const unsigned char *buf);
|
|
|
|
#endif /*_POWERWARE_H */
|
|
|