lagertonne/nut
1
0
Fork 0
Code Issues Pull requests Projects Releases 2 Wiki Activity
nut/drivers/dummy-ups.h
Laurent Bigonville c9cb2187ee Imported Upstream version 2.7.4
2016-07-18 02:11:41 +02:00

236 lines
9.1 KiB
C
Raw Blame History

/* dummy-ups.h - NUT testing driver and repeater
Copyright (C)
2005 - 2012 Arnaud Quette <http://arnaud.quette.free.fr/contact.html>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/* This file lists all valid data with their type and info.
*
* These are then enabled through a definition file, specified
* as the "port" parameter (only the file name, not the path).
*
* The format of this file is the same as an upsc dump:
*
* <varname>: <value>
*
* FIXME: use cmdvartab for conformance checking
* ...
* Once the driver is loaded:
* - change the value by using upsrw
* - ?you can add new variables and change variable values by
* editing the definition file?
*/
/* from usbhid-ups.h */
/* --------------------------------------------------------------- */
/* Struct & data for ups.status processing */
/* --------------------------------------------------------------- */
#if 0 /* XXX status lookup table not currently used???? */
/*
* Status lookup table type definition
*/
typedef struct {
const char *status_str; /* ups.status string */
int status_value; /* ups.status flag bit */
} status_lkp_t;
#define STATUS_CAL (1 << 0) /* calibration */
#define STATUS_TRIM (1 << 1) /* SmartTrim */
#define STATUS_BOOST (1 << 2) /* SmartBoost */
#define STATUS_OL (1 << 3) /* on line */
#define STATUS_OB (1 << 4) /* on battery */
#define STATUS_OVER (1 << 5) /* overload */
#define STATUS_LB (1 << 6) /* low battery */
#define STATUS_RB (1 << 7) /* replace battery */
#define STATUS_BYPASS (1 << 8) /* on bypass */
#define STATUS_OFF (1 << 9) /* ups is off */
#define STATUS_CHRG (1 << 10) /* charging */
#define STATUS_DISCHRG (1 << 11) /* discharging */
/*
* Status lookup table
*/
status_lkp_t status_info[] = {
{ "CAL", STATUS_CAL },
{ "TRIM", STATUS_TRIM },
{ "BOOST", STATUS_BOOST },
{ "OL", STATUS_OL },
{ "OB", STATUS_OB },
{ "OVER", STATUS_OVER },
{ "LB", STATUS_LB },
{ "RB", STATUS_RB },
{ "BYPASS", STATUS_BYPASS },
{ "OFF", STATUS_OFF },
{ "CHRG", STATUS_CHRG },
{ "DISCHRG", STATUS_DISCHRG },
{ "NULL", 0 },
};
#endif /* 0 -- not currently used??? */
typedef struct {
char hid_value; /* HID value */
char *nut_value; /* NUT value */
} info_enum_t;
/* --------------------------------------------------------------- */
/* Structure containing information about how to get/set data */
/* from/to the UPS and convert these to/from NUT standard */
/* --------------------------------------------------------------- */
typedef struct {
const char *info_type; /* NUT variable name */
int info_flags; /* NUT flags (to set in addinfo) */
float info_len; /* if ST_FLAG_STRING: length of the string */
/* if HU_TYPE_CMD: command value ; multiplier (or max len) otherwise */
const char *default_value; /* if HU_FLAG_ABSENT: default value ; format otherwise */
int drv_flags; /* */
char **var_values; /* all possible values for this variable (allows to check data...) */
/* FIXME: "void *" so we can have bound or enum */
/* interpreter interpret; */ /* FFE: interpreter fct, NULL if not needed */
} dummy_info_t;
/* data flags */
#define DU_FLAG_NONE 0
#define DU_FLAG_INIT 1 /* intialy show element to upsd */
/* --------------------------------------------------------------- */
/* Data table (all possible info from NUT, then enable upon cong */
/* --------------------------------------------------------------- */
/* FIXME: need to enforce value check with enum or bounds */
dummy_info_t nut_data[] =
{
/* Essential variables, loaded before parsing the definition file */
{ "ups.mfr", ST_FLAG_STRING | ST_FLAG_RW, 32, "Dummy Manufacturer", DU_FLAG_INIT, NULL },
{ "ups.model", ST_FLAG_STRING | ST_FLAG_RW, 32, "Dummy UPS", DU_FLAG_INIT, NULL },
{ "ups.status", ST_FLAG_STRING | ST_FLAG_RW, 32, "OL", DU_FLAG_INIT, NULL },
/* Other known variables */
{ "ups.serial", ST_FLAG_STRING | ST_FLAG_RW, 32, NULL, DU_FLAG_NONE, NULL },
{ "ups.load", ST_FLAG_RW, 32, NULL, DU_FLAG_NONE, NULL },
{ "ups.alarm", ST_FLAG_STRING | ST_FLAG_RW, 32, NULL, DU_FLAG_NONE, NULL },
{ "ups.time", ST_FLAG_STRING | ST_FLAG_RW, 16, NULL, DU_FLAG_NONE, NULL },
{ "ups.date", ST_FLAG_STRING | ST_FLAG_RW, 16, NULL, DU_FLAG_NONE, NULL },
{ "ups.mfr.date", ST_FLAG_STRING | ST_FLAG_RW, 16, NULL, DU_FLAG_NONE, NULL },
{ "ups.serial", ST_FLAG_STRING | ST_FLAG_RW, 16, NULL, DU_FLAG_NONE, NULL },
{ "ups.firmware", ST_FLAG_STRING | ST_FLAG_RW, 16, NULL, DU_FLAG_NONE, NULL },
{ "ups.firmware.aux", ST_FLAG_STRING | ST_FLAG_RW, 16, NULL, DU_FLAG_NONE, NULL },
{ "ups.temperature", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "ups.id", ST_FLAG_STRING | ST_FLAG_RW, 16, NULL, DU_FLAG_NONE, NULL },
{ "ups.delay.start", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "ups.delay.reboot", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "ups.delay.shutdown", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "ups.test.interval", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "ups.test.result", ST_FLAG_STRING | ST_FLAG_RW, 16, NULL, DU_FLAG_NONE, NULL },
/*
ups.display.language
ups.contacts
ups.power
ups.power.nominal
*/
{ "input.voltage", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "input.voltage.maximum", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "input.voltage.minimum", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "input.voltage.nominal", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "input.transfer.reason", ST_FLAG_STRING | ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "input.transfer.low", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "input.transfer.high", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "input.sensitivity", ST_FLAG_STRING | ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "input.quality", ST_FLAG_STRING | ST_FLAG_RW, 6, NULL, DU_FLAG_NONE, NULL },
{ "input.frequency", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "input.transfer.boost.low", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "input.transfer.boost.high", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "input.transfer.trim.low", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "input.transfer.trim.high", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "output.voltage", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "output.frequency", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "output.current", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
/*
output.voltage.nominal
*/
{ "battery.charge", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "battery.charge.low", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "battery.voltage", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "battery.current", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "battery.runtime", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "battery.runtime.low", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "battery.charge.restart", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "battery.temperature", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "battery.voltage.nominal", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
/*
battery.alarm.threshold
battery.date
battery.packs
battery.packs.bad
*/
{ "ambient.temperature", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "ambient.temperature.alarm", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "ambient.temperature.high", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "ambient.temperature.low", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "ambient.humidity", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "ambient.humidity.alarm", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "ambient.humidity.high", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
{ "ambient.humidity.low", ST_FLAG_RW, 1, NULL, DU_FLAG_NONE, NULL },
/*
FIXME: how to manage these? (i.e. index <n>)
outlet.n.id
outlet.n.desc
outlet.n.switch
outlet.n.status
outlet.n.switchable
outlet.n.autoswitch.charge.low
outlet.n.delay.shutdown
outlet.n.delay.start
...
driver.name
driver.version
driver.version.internal | Internal driver version | 1.23.45 |
driver.parameter.xxx
driver.flag.xxx
No need for these!
server.info
server.version
Cmds
load.off
load.on
shutdown.return
shutdown.stayoff
shutdown.stop
shutdown.reboot
shutdown.reboot.graceful
test.panel.start
test.panel.stop
test.failure.start
test.failure.stop
test.battery.start
test.battery.stop
calibrate.start
calibrate.stop
bypass.start
bypass.stop
reset.input.minmax
reset.watchdog
beeper.enable
beeper.disable
*/
/* end of structure. */
{ NULL, 0, 0, NULL, DU_FLAG_NONE, NULL }
};
Reference in a new issue View git blame Copy permalink