443 lines
11 KiB
C
443 lines
11 KiB
C
/*
|
|
* Copyright (C) 2012 - EATON
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
/*! \file scan_eaton_serial.c
|
|
\brief detect Eaton serial XCP, SHUT and Q1 devices
|
|
\author Arnaud Quette <ArnaudQuette@eaton.com>
|
|
*/
|
|
|
|
#include "common.h"
|
|
|
|
/* Need this on AIX when using xlc to get alloca */
|
|
#ifdef _AIX
|
|
#pragma alloca
|
|
#endif /* _AIX */
|
|
|
|
#include <fcntl.h>
|
|
#include <stdio.h>
|
|
#include <signal.h>
|
|
#include <stdlib.h>
|
|
#include <string.h>
|
|
#include <unistd.h>
|
|
#include "nut-scan.h"
|
|
#include "serial.h"
|
|
#include "bcmxcp_io.h"
|
|
#include "bcmxcp.h"
|
|
#include "nutscan-serial.h"
|
|
|
|
#ifdef HAVE_PTHREAD
|
|
#include <pthread.h>
|
|
#endif
|
|
|
|
/* SHUT header */
|
|
#define SHUT_SYNC 0x16
|
|
#define MAX_TRY 4
|
|
|
|
/* BCMXCP header */
|
|
extern unsigned char AUT[4];
|
|
extern struct pw_baud_rate {
|
|
int rate;
|
|
int name;
|
|
} pw_baud_rates[];
|
|
|
|
/* Local list of found devices */
|
|
static nutscan_device_t * dev_ret = NULL;
|
|
|
|
/* Remap some functions to avoid undesired behavior (drivers/main.c) */
|
|
char *getval(const char *var) { return NULL; }
|
|
|
|
#ifdef HAVE_PTHREAD
|
|
static pthread_mutex_t dev_mutex;
|
|
#endif
|
|
|
|
/* Drivers name */
|
|
#define SHUT_DRIVER_NAME "mge-shut"
|
|
#define XCP_DRIVER_NAME "bcmxcp"
|
|
#define Q1_DRIVER_NAME "blazer_ser"
|
|
|
|
/* Fake driver main, for using serial functions, needed for bcmxcp_ser.c */
|
|
char *device_path;
|
|
int upsfd;
|
|
int exit_flag = 0;
|
|
int do_lock_port;
|
|
|
|
/* Functions extracted from drivers/bcmxcp.c, to avoid pulling too many things
|
|
* lightweight function to calculate the 8-bit
|
|
* two's complement checksum of buf, using XCP data length (including header)
|
|
* the result must be 0 for the sequence data to be valid */
|
|
int checksum_test(const unsigned char *buf)
|
|
{
|
|
unsigned char checksum = 0;
|
|
int i, length;
|
|
/* buf[2] is the length of the XCP frame ; add 5 for the header */
|
|
length = (int)(buf[2]) + 5;
|
|
|
|
for (i = 0; i < length; i++) {
|
|
checksum += buf[i];
|
|
}
|
|
/* Compute the 8-bit, Two's Complement checksum now and return it */
|
|
checksum = ((0x100 - checksum) & 0xFF);
|
|
return (checksum == 0);
|
|
}
|
|
|
|
|
|
unsigned char calc_checksum(const unsigned char *buf)
|
|
{
|
|
unsigned char c;
|
|
int i;
|
|
|
|
c = 0;
|
|
for(i = 0; i < 2 + buf[1]; i++)
|
|
c -= buf[i];
|
|
|
|
return c;
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* SHUT functions (MGE legacy, but Eaton path forward)
|
|
******************************************************************************/
|
|
|
|
/* Light version of of drivers/libshut.c->shut_synchronise()
|
|
* return 1 if OK, 0 otherwise */
|
|
int shut_synchronise(int upsfd)
|
|
{
|
|
int try;
|
|
u_char reply = '\0';
|
|
|
|
/* Sync with the UPS according to notification */
|
|
for (try = 0; try < MAX_TRY; try++) {
|
|
if ((ser_send_char(upsfd, SHUT_SYNC)) == -1) {
|
|
continue;
|
|
}
|
|
|
|
ser_get_char(upsfd, &reply, 1, 0);
|
|
if (reply == SHUT_SYNC) {
|
|
return 1;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* SHUT scan:
|
|
* send SYNC token (0x16) and receive the SYNC token back
|
|
* FIXME: maybe try to get device descriptor?!
|
|
*/
|
|
nutscan_device_t * nutscan_scan_eaton_serial_shut(const char* port_name)
|
|
{
|
|
nutscan_device_t * dev = NULL;
|
|
int devfd = -1;
|
|
|
|
if ( (devfd = ser_open_nf(port_name)) != -1 ) {
|
|
/* set RTS to off and DTR to on to allow correct behavior
|
|
* with UPS using PnP feature */
|
|
if (ser_set_dtr(devfd, 1) != -1) {
|
|
|
|
ser_set_rts(devfd, 0);
|
|
ser_set_speed_nf(devfd, port_name, B2400);
|
|
|
|
if (shut_synchronise(devfd)) {
|
|
|
|
/* Communication established successfully! */
|
|
dev = nutscan_new_device();
|
|
dev->type = TYPE_EATON_SERIAL;
|
|
dev->driver = strdup(SHUT_DRIVER_NAME);
|
|
dev->port = strdup(port_name);
|
|
#ifdef HAVE_PTHREAD
|
|
pthread_mutex_lock(&dev_mutex);
|
|
#endif
|
|
dev_ret = nutscan_add_device_to_device(dev_ret, dev);
|
|
#ifdef HAVE_PTHREAD
|
|
pthread_mutex_unlock(&dev_mutex);
|
|
#endif
|
|
}
|
|
}
|
|
/* Close the device */
|
|
ser_close(devfd, NULL);
|
|
}
|
|
|
|
return dev;
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* XCP functions (Eaton Powerware legacy)
|
|
******************************************************************************/
|
|
|
|
/* XCP scan:
|
|
* baudrate nego (...)
|
|
* Send ESC to take it out of menu
|
|
* Wait 90ms
|
|
* Send auth command (AUTHOR[4] = {0xCF, 0x69, 0xE8, 0xD5};)
|
|
* Wait 500ms (or less?)
|
|
* Send PW_SET_REQ_ONLY_MODE command (0xA0) and wait for response
|
|
* [Get ID Block (PW_ID_BLOCK_REQ) (0x31)]
|
|
*/
|
|
nutscan_device_t * nutscan_scan_eaton_serial_xcp(const char* port_name)
|
|
{
|
|
nutscan_device_t * dev = NULL;
|
|
int i, ret, devfd = -1;
|
|
unsigned char answer[256];
|
|
unsigned char sbuf[128];
|
|
|
|
memset(sbuf, 0, 128);
|
|
|
|
if ( (devfd = ser_open_nf(port_name)) != -1 ) {
|
|
#ifdef HAVE_PTHREAD
|
|
pthread_mutex_lock(&dev_mutex);
|
|
#endif
|
|
upsfd = devfd;
|
|
#ifdef HAVE_PTHREAD
|
|
pthread_mutex_unlock(&dev_mutex);
|
|
#endif
|
|
|
|
for (i=0; (pw_baud_rates[i].rate != 0) && (dev == NULL); i++)
|
|
{
|
|
memset(answer, 0, 256);
|
|
|
|
if (ser_set_speed_nf(devfd, port_name, pw_baud_rates[i].rate) == -1)
|
|
break;
|
|
|
|
ret = ser_send_char(devfd, 0x1d); /* send ESC to take it out of menu */
|
|
if (ret <= 0)
|
|
break;
|
|
|
|
usleep(90000);
|
|
send_write_command(AUT, 4);
|
|
usleep(500000);
|
|
|
|
/* Discovery with Baud Hunting (XCP protocol spec. §4.1.2)
|
|
* sending PW_SET_REQ_ONLY_MODE should be enough, since
|
|
* the unit should send back Identification block */
|
|
sbuf[0] = PW_COMMAND_START_BYTE;
|
|
sbuf[1] = (unsigned char)1;
|
|
sbuf[2] = PW_SET_REQ_ONLY_MODE;
|
|
sbuf[3] = calc_checksum(sbuf);
|
|
ret = ser_send_buf_pace(devfd, 1000, sbuf, 4);
|
|
|
|
/* Read PW_COMMAND_START_BYTE byte */
|
|
ret = ser_get_char(devfd, answer, 1, 0);
|
|
|
|
#if 0
|
|
/* FIXME: seems not needed, but requires testing with more devices! */
|
|
if (ret <= 0) {
|
|
usleep(250000); /* 500000? */
|
|
memset(answer, 0, 256);
|
|
ret = command_sequence(&id_command, 1, answer);
|
|
}
|
|
#endif
|
|
|
|
if ( (ret > 0) && (answer[0] == PW_COMMAND_START_BYTE) ) {
|
|
dev = nutscan_new_device();
|
|
dev->type = TYPE_EATON_SERIAL;
|
|
dev->driver = strdup(XCP_DRIVER_NAME);
|
|
dev->port = strdup(port_name);
|
|
#ifdef HAVE_PTHREAD
|
|
pthread_mutex_lock(&dev_mutex);
|
|
#endif
|
|
dev_ret = nutscan_add_device_to_device(dev_ret, dev);
|
|
#ifdef HAVE_PTHREAD
|
|
pthread_mutex_unlock(&dev_mutex);
|
|
#endif
|
|
break;
|
|
}
|
|
usleep(100000);
|
|
}
|
|
/* Close the device */
|
|
ser_close(devfd, NULL);
|
|
}
|
|
|
|
return dev;
|
|
}
|
|
|
|
/*******************************************************************************
|
|
* Q1 functions (Phoenixtec/Centralion/Santak, still Eaton path forward)
|
|
******************************************************************************/
|
|
|
|
#define SER_WAIT_SEC 1 /* 3 seconds for Best UPS */
|
|
#define MAXTRIES 3
|
|
|
|
/* Q1 scan:
|
|
* - open the serial port and set the speed to 2400 baud
|
|
* - simply try to get Q1 (status) string
|
|
* - check its size and first char. which should be '('
|
|
*/
|
|
nutscan_device_t * nutscan_scan_eaton_serial_q1(const char* port_name)
|
|
{
|
|
nutscan_device_t * dev = NULL;
|
|
struct termios tio;
|
|
int ret = 0, retry;
|
|
int devfd = -1;
|
|
char buf[128];
|
|
|
|
if ( (devfd = ser_open_nf(port_name)) != -1 ) {
|
|
if (ser_set_speed_nf(devfd, port_name, B2400) != -1) {
|
|
|
|
if (!tcgetattr(devfd, &tio)) {
|
|
|
|
/* Use canonical mode input processing (to read reply line) */
|
|
tio.c_lflag |= ICANON; /* Canonical input (erase and kill processing) */
|
|
|
|
tio.c_cc[VEOF] = _POSIX_VDISABLE;
|
|
tio.c_cc[VEOL] = '\r';
|
|
tio.c_cc[VERASE] = _POSIX_VDISABLE;
|
|
tio.c_cc[VINTR] = _POSIX_VDISABLE;
|
|
tio.c_cc[VKILL] = _POSIX_VDISABLE;
|
|
tio.c_cc[VQUIT] = _POSIX_VDISABLE;
|
|
tio.c_cc[VSUSP] = _POSIX_VDISABLE;
|
|
tio.c_cc[VSTART] = _POSIX_VDISABLE;
|
|
tio.c_cc[VSTOP] = _POSIX_VDISABLE;
|
|
|
|
if (!tcsetattr(devfd, TCSANOW, &tio)) {
|
|
|
|
/* Set the default (normal) cablepower */
|
|
ser_set_dtr(devfd, 1);
|
|
ser_set_rts(devfd, 0);
|
|
|
|
/* Allow some time to settle for the cablepower */
|
|
usleep(100000);
|
|
|
|
/* Only try pure 'Q1', not older ones like 'D' or 'QS'
|
|
* > [Q1\r]
|
|
* < [(226.0 195.0 226.0 014 49.0 27.5 30.0 00001000\r]
|
|
*/
|
|
for (retry = 1; retry <= MAXTRIES; retry++) {
|
|
|
|
/* simplified code */
|
|
ser_flush_io(devfd);
|
|
if ( (ret = ser_send(devfd, "Q1\r")) > 0) {
|
|
|
|
/* Get Q1 reply */
|
|
if ( (ret = ser_get_buf(devfd, buf, sizeof(buf), SER_WAIT_SEC, 0)) > 0) {
|
|
|
|
/* Check answer */
|
|
/* should at least (and most) be 46 chars */
|
|
if (ret >= 46) {
|
|
if (buf[0] == '(') {
|
|
|
|
dev = nutscan_new_device();
|
|
dev->type = TYPE_EATON_SERIAL;
|
|
dev->driver = strdup(Q1_DRIVER_NAME);
|
|
dev->port = strdup(port_name);
|
|
#ifdef HAVE_PTHREAD
|
|
pthread_mutex_lock(&dev_mutex);
|
|
#endif
|
|
dev_ret = nutscan_add_device_to_device(dev_ret, dev);
|
|
#ifdef HAVE_PTHREAD
|
|
pthread_mutex_unlock(&dev_mutex);
|
|
#endif
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
/* Close the device */
|
|
ser_close(devfd, NULL);
|
|
}
|
|
return dev;
|
|
}
|
|
|
|
static void * nutscan_scan_eaton_serial_device(void * port_arg)
|
|
{
|
|
nutscan_device_t * dev = NULL;
|
|
char* port_name = (char*) port_arg;
|
|
|
|
/* Try SHUT first */
|
|
if ( (dev = nutscan_scan_eaton_serial_shut(port_name)) == NULL) {
|
|
usleep(100000);
|
|
/* Else, try XCP */
|
|
if ( (dev = nutscan_scan_eaton_serial_xcp(port_name)) == NULL) {
|
|
/* Else, try Q1 */
|
|
usleep(100000);
|
|
dev = nutscan_scan_eaton_serial_q1(port_name);
|
|
}
|
|
/* Else try UTalk? */
|
|
}
|
|
return dev;
|
|
}
|
|
|
|
nutscan_device_t * nutscan_scan_eaton_serial(const char* ports_range)
|
|
{
|
|
struct sigaction oldact;
|
|
int change_action_handler = 0;
|
|
char *current_port_name = NULL;
|
|
char **serial_ports_list;
|
|
int current_port_nb;
|
|
int i;
|
|
#ifdef HAVE_PTHREAD
|
|
pthread_t thread;
|
|
pthread_t * thread_array = NULL;
|
|
int thread_count = 0;
|
|
|
|
pthread_mutex_init(&dev_mutex,NULL);
|
|
#endif
|
|
|
|
/* 1) Get ports_list */
|
|
serial_ports_list = nutscan_get_serial_ports_list(ports_range);
|
|
if( serial_ports_list == NULL ) {
|
|
return NULL;
|
|
}
|
|
|
|
/* Ignore SIGPIPE if the caller hasn't set a handler for it yet */
|
|
if( sigaction(SIGPIPE, NULL, &oldact) == 0 ) {
|
|
if( oldact.sa_handler == SIG_DFL ) {
|
|
change_action_handler = 1;
|
|
signal(SIGPIPE,SIG_IGN);
|
|
}
|
|
}
|
|
|
|
/* port(s) iterator */
|
|
current_port_nb = 0;
|
|
while(serial_ports_list[current_port_nb] != NULL) {
|
|
current_port_name = serial_ports_list[current_port_nb];
|
|
#ifdef HAVE_PTHREAD
|
|
if (pthread_create(&thread, NULL, nutscan_scan_eaton_serial_device, (void*)current_port_name) == 0){
|
|
thread_count++;
|
|
thread_array = realloc(thread_array,
|
|
thread_count*sizeof(pthread_t));
|
|
thread_array[thread_count-1] = thread;
|
|
}
|
|
#else
|
|
nutscan_scan_eaton_serial_device(current_port_name);
|
|
#endif
|
|
current_port_nb++;
|
|
}
|
|
|
|
#ifdef HAVE_PTHREAD
|
|
for ( i = 0; i < thread_count ; i++) {
|
|
pthread_join(thread_array[i],NULL);
|
|
}
|
|
pthread_mutex_destroy(&dev_mutex);
|
|
free(thread_array);
|
|
#endif
|
|
|
|
if(change_action_handler) {
|
|
signal(SIGPIPE,SIG_DFL);
|
|
}
|
|
|
|
/* free everything... */
|
|
i=0;
|
|
while(serial_ports_list[i] != NULL) {
|
|
free(serial_ports_list[i]);
|
|
i++;
|
|
}
|
|
free( serial_ports_list);
|
|
return nutscan_rewind_device(dev_ret);
|
|
}
|