1688 lines
69 KiB
Text
1688 lines
69 KiB
Text
If you're upgrading from an earlier version, see the UPGRADING file.
|
|
|
|
For a complete and more detailed list of changes, please refer to the
|
|
ChangeLog file.
|
|
|
|
---------------------------------------------------------------------------
|
|
Release notes for NUT 2.7.4 - what's new since 2.7.3:
|
|
|
|
- New class of device supported: ATS - Automatic Transfer Switch are now
|
|
supported in NUT. Eaton ATS are supported, and APC ones should be too. Users
|
|
are welcomed to test and provide feedback
|
|
|
|
- NUT command and variable naming scheme:
|
|
* Document battery.charger.status, which will in time replace the historic
|
|
CHRG and DISCHRG flags published in ups.status
|
|
* Many extensions to support outlets groups, thresholds / alarms (ambient,
|
|
input, output, outlet and outlet.group)
|
|
|
|
- support for new devices:
|
|
AEG PROTECT B / NAS
|
|
APC ATS AP7724 (should be supported)
|
|
Asium P700
|
|
Eaton ATS
|
|
Eaton 5E 1100iUSB
|
|
Eaton E Series DX UPS 1-20 kVA
|
|
Eaton Powerware 9125-5000g
|
|
Electrys UPS 2500
|
|
Fideltronic INIGO Viper 1200
|
|
Legrand Keor Multiplug
|
|
LYONN CTB-800V
|
|
Micropower LCD 1000
|
|
NHS Laser Senoidal 5000VA
|
|
Sweex model P220
|
|
TS Shara
|
|
Various APCUPSD-controlled APC devices
|
|
|
|
- snmp-ups:
|
|
* Improve automatic detection algorithm
|
|
* Provide access to Net-SNMP timeout and retries
|
|
* Proper handling of integer RW variables
|
|
* Implement support for alarms, through ups.alarm and outlet.n.alarm
|
|
* Improve log/debug output trace
|
|
* Fix loss of precision when setting values, using upsrw
|
|
* Support for outlets group management
|
|
* Many improvements and simplification
|
|
* Add support for Tripplite units using IETF mib
|
|
* Improve communication staleness detection and recovery
|
|
* Add devices MAC address publication
|
|
* Register values enumerations, when available
|
|
* Many improvements and fixes to the SNMP subdriver creation script
|
|
|
|
- Eaton:
|
|
* 3ph SNMP:
|
|
Many improvements to Powerware / XUPS MIB, for data and commands
|
|
Add support for Eaton Power Xpert Gateway UPS Card
|
|
Improve support for temperature and humidity, including low / high values
|
|
Alarms handling
|
|
* ePDU (G2 and G3):
|
|
Improve support for ambient sensor, including thresholds and dry contacts
|
|
Outlet groups handling, including data, thresholds, settings and commands
|
|
Alarms handling
|
|
* XML/PDC (netxml-ups):
|
|
Fix Eaton XML published data
|
|
Add some settings (R/W flags) on ambient thresholds
|
|
|
|
- bcmxcp_usb: improvements for device claiming and multi-packets responses
|
|
|
|
- dummy-ups: allow any variable to be modified
|
|
|
|
- libnutclient: Fix for reads when the socket was closed by NUT server
|
|
|
|
- macosx-ups:
|
|
* fix for 10.10 (Yosemite), v1.1
|
|
* gracefully handle disconnection of UPS (return "data stale")
|
|
|
|
- nutdrv_atcl_usb: point to nutdrv_qx (fuji) for 0001:0000
|
|
|
|
- nutdrv_qx:
|
|
* Add new 'sgs' USB subdriver to support TS Shara units
|
|
* various improvements and simplification, to the code and documentation
|
|
|
|
- nut-ipmipsu: improve FreeIPMI support
|
|
|
|
- nut-scanner:
|
|
* Don't depend on development libraries, by looking at some known paths,
|
|
including the one provided through --libdir, to find the correct libraries
|
|
* Fix a crash on a 2nd call to libnutscan with SNMP method
|
|
|
|
- powercom: fix the processing of input and output voltage for KIN units
|
|
|
|
- solis:
|
|
* many improvements and cleanup
|
|
* resync with end-of-packet character
|
|
* fixes for Microsol Back-Ups BZ1200-BR
|
|
|
|
- tripplitesu: Fix initialization when tripplite firmware is buggy (for
|
|
Tripplite SU1000RT2U and possibly more)
|
|
|
|
- usbhid-ups:
|
|
* various minor improvements
|
|
* support for Eaton UPS with dual HID report descriptor in HID Parser
|
|
* handle missing USB strings in APC code
|
|
|
|
- SSL support through Mozilla NSS: Rework the NSS tests to ensure that NSS is
|
|
actually installed and usable for enabling SSL support in NUT
|
|
|
|
- Augeas support: Augeas lens for ups.conf was updated to add various missing
|
|
global directives and ups fields
|
|
|
|
- scripts/systemd/nut-server.service.in: Restore systemd relationship since it
|
|
was preventing upsd from starting whenever one or more drivers, among several,
|
|
was failing to start
|
|
|
|
- Fix UPower device matching for recent kernels, since hiddev* devices now have
|
|
class "usbmisc", rather than "usb"
|
|
|
|
- Network protocol information: default to type NUMBER for variables that are
|
|
not flagged as STRING . This point is subject to improvements or change in
|
|
the next release 2.7.5. Refer to docs/net-protocol.txt for more information
|
|
|
|
- As usual, more bugfixes, cleanup and improvements, on both source code
|
|
and documentation.
|
|
|
|
---------------------------------------------------------------------------
|
|
Release notes for NUT 2.7.3 - what's new since 2.7.2:
|
|
|
|
- reverted POWERDOWNFLAG to /etc/killpower as in 2.6.5 (packagers may want to
|
|
put this in another filesystem, though)
|
|
|
|
- configure/make fixes for ${systemdsystemunitdir}
|
|
|
|
- apcsmart: fix command set parsing for protocol version 4 (e.g. Smart-UPS
|
|
RT 10000 XL)
|
|
|
|
- upslog: SIGUSR1 forces an immediate log entry
|
|
|
|
- riello_usb/_ser: USB interface claim fix; improved error handling
|
|
|
|
- usbhid-ups: add support for OpenUPS2 (PID: D005), Liebert GXT3 (PID: 0008)
|
|
APC AP9584 Serial->USB kit (PID: 0000), and some Powercom models
|
|
(PID: 0001). Fixed scaling for Cyberpower 0764:0501.
|
|
|
|
- USB core: do not call usb_set_altinterface(0) by default
|
|
|
|
- nutdrv_qx: added fabula, fuji USB and Voltronic-QS-HEX subdrivers; add
|
|
bestups subdriver to supersede the old standalone bestups driver
|
|
|
|
- NUT Monitor: added FreeDesktop AppData file (including screenshots)
|
|
|
|
- renamed udev rules file to 62-nut-usbups.rules (permissions fix)
|
|
|
|
- added AIX packaging
|
|
|
|
- asem: added a driver for the UPS in ASEM PB1300 embedded PCs
|
|
|
|
- solis: updated to support APC Microsol units sold in Brazil
|
|
|
|
- tripplite_usb: updated to use dv/dq charge calculation for all models (also
|
|
exposes battery_min and battery max as configuration variables); added
|
|
binary 3005 protocol support (such as for SMART500RT1U)
|
|
|
|
- genericups: better debugging while parsing the cable description flags
|
|
|
|
- all drivers: a new 'synchronous' driver flag is available for very verbose
|
|
units, such as some ePDUs
|
|
|
|
- Eaton:
|
|
* Add support for EnergySaving features for Eaton UPSs (HID USB/SHUT and
|
|
XCP USB/serial)
|
|
* Fix and complete Eaton ePDUs G2/G3 support
|
|
* ABM (Advanced Battery Monitoring) support through battery.charger.status
|
|
in HID (USB and SHUT), XCP (USB and serial) and SNMP (Powerware XUPS
|
|
MIB)
|
|
|
|
- support for new devices:
|
|
APC Back-UPS 1200BR and Back-UPS BZ2200BI-BR (Microsol)
|
|
ASEM SPA PB1300 UPS
|
|
Belkin Regulator PRO-USB
|
|
Cyber Power Systems Value 1500ELCD-RU
|
|
EUROCASE EA200N 2000VA
|
|
Fideltronik LUPUS 500
|
|
Flight Technic & International (FTUPS) FT-1000BS and FT-1000BS(T)
|
|
Grafenthal PR-3000-HS
|
|
JAWAN JW-UPSLC02
|
|
Lacerda New Orion 800VA
|
|
Mecer ME-1000-WTU
|
|
NHS Sistemas de Energia Expert C Online 6000/8000/10000
|
|
NHS Sistemas de Energia Expert S Online 6000/8000/10000
|
|
Powercom BNT-xxxAP (USB product id: 0001)
|
|
Rucelf UPOII-3000-96-EL
|
|
Tripp Lite OMNIVSINT800
|
|
Voltronic Power Apex 1KVA and Imperial 1KVA
|
|
|
|
---------------------------------------------------------------------------
|
|
Release notes for NUT 2.7.2 - what's new since 2.7.1:
|
|
|
|
- This release is the second interim release of the 2.7 testing series.
|
|
|
|
- libupsclient had undefined references related to functions of libcommon.
|
|
This issue was reported on Debian (bug #731156) and is now fixed
|
|
|
|
- support for new devices:
|
|
CABAC UPS-1700DV2
|
|
Eaton Powerware 3105
|
|
Emerson Network Power Liebert PSI 1440
|
|
MicroDowell B.Box LP 500
|
|
Numeric Digital 800 plus
|
|
OptiUPS VS 575C
|
|
Tripp Lite SU10KRT3/1X
|
|
|
|
- FreeDesktop Hardware Abstraction Layer (HAL) support was removed.
|
|
|
|
- nutdrv_atcl_usb: new driver for 'ATCL FOR UPS'
|
|
|
|
- al175: re-introduced this driver (actually, it was in 2.7.1)
|
|
|
|
- upsdrvctl now provides retry options for upsdrvctl and driver(s)
|
|
|
|
- snmp-ups: add support for XPPC-MIB and Tripp Lite SU10KRT3/1X.
|
|
Also fix erroneous status in HP/Compaq SNMP MIB (with the most recent HP
|
|
firmware (1.76) ; improved various MIBs (APC, HP/Compaq, ...)
|
|
|
|
- nutdrv_qx: add new 'fallback' Q1 subdriver, with minimal 'Q1' support.
|
|
General improvements on all subdrivers.
|
|
|
|
- mge-shut: partially revert PnP/RTS change, for initializing the
|
|
communication with the UPS. Note that nut-scanner similar function was
|
|
not modified however.
|
|
|
|
- FreeBSD DEVD support: generate devd.conf files for USB UPSes
|
|
This adds a --with-devd-dir=PATH option to ./configure
|
|
|
|
- The NUT website was moved to a standalone website. A separate code
|
|
repository and source archive are now available.
|
|
|
|
- As usual, more bugfixes, cleanup and improvements, on both source code
|
|
and documentation.
|
|
|
|
---------------------------------------------------------------------------
|
|
Release notes for NUT 2.7.1 - what's new since 2.6.5:
|
|
|
|
- This release is an interim release, part of the testing series, and the
|
|
first release after the transition from Subversion to Git.
|
|
The last release (2.6.5) is almost a year old. A lot of work has
|
|
been done, but a good amount remains to achieve 2.8.0 goals.
|
|
Please read the UPGRADING notes.
|
|
|
|
- Added support for SSL via the Mozilla NSS library, in addition to the
|
|
existing OpenSSL support.
|
|
|
|
- Added a new driver, nutdrv_qx, for Megatec/Qx devices. This driver will
|
|
eventually replace the blazer_ser and blazer_usb drivers. In particular, it
|
|
adds support for Voltronic Power devices.
|
|
|
|
- Increased USB_TIMEOUT to standards-compliant 5.000 seconds in most drivers.
|
|
This should reduce the number of timeouts on low-speed USB 1.1 devices.
|
|
|
|
- The jNut Java source has been split into a separate GitHub repository.
|
|
|
|
- Added many devices to the HCL. Of particular note are many Tripp Lite USB
|
|
HID PDC models which were tested against NUT by Tripp Lite.
|
|
|
|
- Reworked some visual elements of the HCL. The output is better tailored for
|
|
graphical and text-only browsers, but suggestions are welcome for additional
|
|
accessibility enhancements.
|
|
|
|
- Also increased timeouts and added redundant commands to improve reliability
|
|
of mge-utalk driver.
|
|
|
|
- Added the apcupsd-ups driver to interoperate with apcupsd installations.
|
|
|
|
- Added documentation on creating subdrivers for snmp-ups and nutdrv_qx.
|
|
|
|
- Added new drivers for the Riello UPS product line (riello_ser/riello_usb).
|
|
|
|
- Many improvements to the BCM/XCP drivers have been merged in. This includes
|
|
an improved data reception loop, and additional mappings.
|
|
|
|
- Added a few variables to the Powercom HID mappings.
|
|
|
|
- Updated the apcsmart driver, and renamed the previous driver to apcsmart-old.
|
|
|
|
- Fixed the battery percentage calculation in the bestfcom driver.
|
|
|
|
- libnutclient has been added as a C++ alternative to libupsclient.
|
|
|
|
- Packaging files for Solaris and HP-UX (sponsored by Eaton)
|
|
|
|
- Fix shutdown of Eaton HID, using usbhid-ups and mge-shut
|
|
|
|
- usbhid-ups: final fix for APC Back UPS ES. APC Back UPS ES devices have
|
|
buggy firmware, and this version does not cause a regression. The max_report
|
|
variable should be set automatically based on the USB identification values.
|
|
|
|
- nut-scanner: fix crash
|
|
|
|
- IPMI support can handle more different versions of FreeIPMI
|
|
|
|
- Support power supplies scan over the network
|
|
nut-scanner can now scan for power supplies with IPMI over LAN.
|
|
This is currently limited to IPMI 1.5 only
|
|
|
|
- Implement a framework to spell check documentation source files,
|
|
using Aspell. This includes an interactive build target (make
|
|
spellcheck-interactive), and an automated one (make spellcheck),
|
|
mainly for QA / Buildbot purpose. Note that a base NUT dictionary
|
|
is also available (docs/nut.dict), providing a glossary of terms
|
|
related to power devices and management
|
|
|
|
- Improve systemd integration
|
|
|
|
- snmp-ups: Fixed a crash on outlet management, and added delta_ups MIB
|
|
support. Also fixed mappings for upsBypassVoltage, upsBypassCurrent, and
|
|
upsBypassPower in three-phase IETF MIB.
|
|
|
|
---------------------------------------------------------------------------
|
|
Release notes for NUT 2.6.5 - what's new since 2.6.4:
|
|
|
|
- This release fixes an important regression in upssched:
|
|
any upssched.conf command that takes a second argument resulted in
|
|
a defective frame sent to the parent process. Thus, the command was
|
|
not executed (report and patch from Oliver Schonefeld)
|
|
|
|
- Website hosting: free NUT from Eaton website hosting
|
|
NUT website (http://www.networkupstools.org) is no longer hosted by Eaton.
|
|
Arnaud Quette (NUT project leader) has taken over NUT hosting on his own,
|
|
to give NUT back some independence.
|
|
This effort is also part of a logic to stop crediting Eaton for
|
|
contributions from others (especially Arnaud Quette, as an individual).
|
|
The new hosting service is located, as for Arnaud's blog
|
|
(http://arnaud.quette.fr) on Gandi servers, using PaaS. This will allow
|
|
more flexibility and automation of the release process
|
|
|
|
- macosx-ups: new OS X Power Sources meta-driver
|
|
Mac OS X provides UPS status information in a format similar to
|
|
what is shown for laptop batteries. This driver will convert that
|
|
information into a format compatible with NUT (Charles Lepple).
|
|
|
|
- support for new devices:
|
|
Eaton ePDU Switched
|
|
Online Zinto A (USB ID 0x06da:0x0601)
|
|
REDi Blazer 400VA / 600VA / 800VA
|
|
UNITEK Alpha650ipF and Alpha650ipE (USB ID 0x0f03:0x0001)
|
|
|
|
- mge-shut driver has been replaced by a new implementation (newmge-shut).
|
|
In case of issue with this new version, users can revert to oldmge-shut.
|
|
|
|
- First NUT virtualization package: NUT now supports integration with
|
|
VMware ESXI 5.0, through a native VIB package. This is, for the time
|
|
being, an external effort from René Garcia (refer to the Download section
|
|
on NUT website). But work is underway to improve this integration, and
|
|
include it in the NUT source tree
|
|
|
|
- IPMI support (nut-ipmipsu driver and nut-scanner): prepare for supporting
|
|
API changes in upcoming FreeIPMI versions 1.1.x and 1.2.x.
|
|
|
|
- snmp-ups now supports high precision values for APC, and more variables
|
|
|
|
- the NUT variables and commands namespace has been fixed and
|
|
completed, with the known and used variables that were missing.
|
|
|
|
- more bugfixes, cleanup and improvements, on both source code and
|
|
documentation.
|
|
|
|
---------------------------------------------------------------------------
|
|
Release notes for NUT 2.6.4 - what's new since 2.6.3:
|
|
|
|
- This release Fix an important vulnerability in upsd
|
|
(CVE-2012-2944: upsd can be remotely crashed)
|
|
|
|
NUT server (upsd), from versions 2.4.0 to 2.6.3, are exposed to
|
|
crashes when receiving random data from the network.
|
|
This issue is related to the way NUT parses characters,
|
|
especially from the network. Non printable characters were missed
|
|
from strings operation (such as strlen), but still copied to the
|
|
buffer, causing an overflow.
|
|
Thus, fix NUT parser, to only allow the subset Ascii charset from
|
|
Space to ~
|
|
(Reported by Sebastian Pohle, Alioth bug #313636, CVE-2012-2944)
|
|
|
|
A separate patch, which applies to any faulty version, is also available:
|
|
http://trac.networkupstools.org/projects/nut/changeset/3633
|
|
|
|
For more information, refer to the Common Vulnerabilities and Exposures:
|
|
http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2012-2944
|
|
|
|
- A static source code analysis has been done by Michal Hlavinka from RedHat,
|
|
using Coverity (12 issues fixed).
|
|
|
|
- Add new "LIST CLIENTS" and "NETVER" commands to NUT network protocol.
|
|
"NETVER" allows to retrieve the Network protocol version, while
|
|
"LIST CLIENTS" provides the list of clients connected to a device.
|
|
Refer to the developer guide, "Network protocol information" section for
|
|
more information.
|
|
|
|
- Support of ranges of values for writable variables has been added, to
|
|
complete the existing enumerated values mechanism. This will start to
|
|
appear in some drivers soon, beginning with Eaton. Refer to the developer
|
|
guide, "Creating a new driver..." section for more information.
|
|
|
|
- PyNUT.py has been updated to version 1.2.2, adding support for
|
|
LIST CLIENTS, FSD, HELP and VER (Rene Martín Rodríguez)
|
|
|
|
- support for new devices:
|
|
AEG Power Solutions PROTECT HOME
|
|
more APC SNMP cards
|
|
ATEK Defensor range
|
|
all Borri models
|
|
all COVER ENERGY SA
|
|
CyberPower OR700LCDRM1U, PR6000LCDRTXL5U and CP1000PFCLCD
|
|
Dell UPS Network Management Card
|
|
Dynamix 1000VA USB
|
|
Eaton Management Card Contact (ref 66104)
|
|
EVER POWERLINE RT / 11 / 31 and DUO II Pro
|
|
GE Digital Energy GT Series 1000-3000 VA
|
|
Gtec models
|
|
all recent HP serial / USB UPS (G2, G3 and R/T models, ) and HP UPS
|
|
Management Module
|
|
Ippon INNOVA RT
|
|
KOLFF BLACK NOVA
|
|
Lexis X-power Tigra 1kVA
|
|
Microline C-Lion Innova
|
|
Online Yunto YQ450
|
|
PowerShield Defender 1200VA
|
|
PowerWalker Online VFI LCD, Line-Interactive VI LCD and Line-Interactive VI
|
|
Riello Netman Plus 102 SNMP Card
|
|
Tripp-Lite OMNISMART500
|
|
|
|
- apcsmart has received some fixes to work better on Mac OS X, and in general
|
|
|
|
- bcmxcp has improved support for battery status, and better supports
|
|
PW9120 units
|
|
|
|
- bestfortress has improved Best Fortress LI675VA support
|
|
|
|
- blazer_ser and blazer_usb now try to automatically estimate high and low
|
|
voltages, to be able to calculate battery charge ; support for online
|
|
Innova UPS (T, RT and 3/1 T) has been added ; Best UPS support has been
|
|
improved, to prepare for superseeding bestups driver
|
|
|
|
- bestups has also received some care, though users are encouraged to switch
|
|
to blazer_ser, since bestups will soon be deprecated.
|
|
|
|
- newmge-shut has been heavily improved. However, replacement of the
|
|
current mge-shut has been postponed to the next release, due to the CVE
|
|
issue.
|
|
|
|
- oneac 0.80 improves support for all families of Oneac (EG, ON, OZ and OB),
|
|
including more data and instant commands (Bill Elliot).
|
|
|
|
- usbhid-ups: for Eaton devices, ups.start.auto is now automatically adjusted
|
|
for shutdown.{return,stayoff} to behave as expected ; Liebert firmwares with
|
|
incorrect exponents have also been addressed.
|
|
|
|
- snmp-ups now provides support for UPS shutdown, based on usbhid-ups
|
|
mechanisms (composite commands and fallback). Composite commands are also
|
|
supported now. This means, for example, that if 'shutdown.return' is not
|
|
supported, a combination of 'load.off' + 'load.on' may be used ;
|
|
Actual validity of instant commands is now tested before commands addition ;
|
|
Eaton/MGE MIB has been cleaned and completed ; 3-phases support has been
|
|
added to Socomec Netvision MIB ; HP/Compaq MIB has been completed, with
|
|
thresholds, nominal values and more commands.
|
|
|
|
- nut-scanner now also has libupsclient has a weak runtime dependency ; more
|
|
docs and bugfixes have also happened.
|
|
|
|
- Provide an Uncomplicated Firewall (UFW) profile (nut.ufw.profile)
|
|
|
|
- Riello protocols have been officially published in NUT protocols library:
|
|
http://www.networkupstools.org/ups-protocols.html#_riello
|
|
|
|
- Duplicate instances of upsd / upsmon are now detected upon startup
|
|
|
|
- NUT variables namespace has been completed with missing variables and
|
|
commands that are already known and standard
|
|
|
|
- upslog now comes with a companion file, for logrotate configuration
|
|
|
|
- more devices embed NUT for power protection, now including Thecus NAS range
|
|
|
|
- more bugfixes, cleanup and improvements, on both source code and
|
|
documentation, with a good bunch from Greg A. Woods.
|
|
|
|
---------------------------------------------------------------------------
|
|
Release notes for NUT 2.6.3 - what's new since 2.6.2:
|
|
|
|
- nut-scanner is now more portable, and provides more coherent option names.
|
|
IPMI support has also been added, to discover local power supplies.
|
|
This version brings weak runtime dependencies in libnutscan, which allows to
|
|
compile nut-scanner with all options and to run according to the available
|
|
dependencies (USB, SNMP, IPMI, ...).
|
|
|
|
- libnutscan now provides pkg-config support and the needed header files are
|
|
distributed. Some documentation is also available in the developer guide and
|
|
manual pages have been updated and completed.
|
|
|
|
- support for new devices: Cyber Power Systems with SNMP RMCARD (100, 201,
|
|
202 and 301) ; Dynamix 650VA USB ; LDLC UPS-1200D ; Tecnoware UPS ERA LCD
|
|
0.65 ; Powercom BNT-xxxAP (USB ID 0d9f:0004) ; Various USB devices using
|
|
UPSilon 2000 software.
|
|
|
|
- apcsmart has received minor correction.
|
|
|
|
- bcmxcp_usb now handles disconnection issues and reconnection mechanism.
|
|
|
|
- blazer_usb enables again inclusion of buggy USB Device and Vendor IDs in
|
|
udev rules file ; language ID support has been added for USB units from
|
|
LDLC, Dynamix and other no names.
|
|
|
|
- nut-ipmipsu has also received some improvements.
|
|
|
|
- snmp-ups has fixed outlets reported current in aphel_genesisII MIB ;
|
|
MGE 3 phases handles better low battery condition ; support for Cyber Power
|
|
Systems with SNMP RMCARD has been added ; support of the newer Eaton ePDUs
|
|
has been improved.
|
|
|
|
- upsd doesn't anymore fail to start if at least one of the listening
|
|
interface is available. This is needed on systems where either IPv4 or IPv6
|
|
is disabled, and no explicit LISTEN directive has been specified.
|
|
|
|
- Avahi support is now automatically enabled, upon detection
|
|
|
|
- jNut (NUT Java interface) adds device discovery support, through a
|
|
nut-scanner wrapper ; jNutWebAPI, a HTTP/JSON web service interface, has
|
|
also been added to interact with upsd and nut-scanner.
|
|
|
|
- Base files for HPUX packaging have been added. This is still a work in
|
|
progress.
|
|
|
|
- Compilation on IBM Aix has been fixed (namespace conflict with ctypes).
|
|
|
|
- more bugfixes, cleanup and improvements, on both source code and
|
|
documentation.
|
|
|
|
---------------------------------------------------------------------------
|
|
Release notes for NUT 2.6.2 - what's new since 2.6.1:
|
|
|
|
- NUT can now monitor power supply units (PSU) in servers, through IPMI, using
|
|
the new experimental 'nut-ipmipsu' driver. Users are encouraged to test it,
|
|
and send feedback and debug output to the development mailing list.
|
|
This requires GNU FreeIPMI (0.8.5 or higher) development package or files.
|
|
Thanks goes to Al Chu, FreeIPMI project leader, for his help during this
|
|
development.
|
|
|
|
- NUT now provides a tool, called 'nut-scanner', to discover supported devices,
|
|
both local and remote. nut-scanner will help to ease the configuration step,
|
|
and power infrastructure discovery.
|
|
This development, sponsored by Eaton, supports the following methods:
|
|
* USB,
|
|
* SNMP,
|
|
* XML/HTTP (from Eaton),
|
|
* NUT servers, using the classic connect or Avahi / mDNS methods.
|
|
|
|
IPMI support will be added in the next release.
|
|
A separate library, called 'libnutscan', is also available to provide these
|
|
feature. Future NUT releases will provides binding for the supported
|
|
languages (Perl, Python and Java).
|
|
|
|
- NUT now provides a Java interface called 'jNut'.
|
|
This development, sponsored by Eaton, is currently limited to the client
|
|
interface. But it will be broaden to device discovery and configuration in
|
|
the future.
|
|
For more info, refer to nut/scripts/java/README, or the developer guide
|
|
(chapter 'Creating new client'). Javadoc documentation is also provided,
|
|
along with Java archives (.jar) in the Download section.
|
|
|
|
- support for new devices: Eaton 3S ; Cyber Power Systems CP1000AVRLCD ;
|
|
various APC models equiped with APC AP9618 management card, including APC
|
|
Smart-UPS RT XL ; Orvaldi 750 / 900SP ; POWEREX VI 1000 LED ; PowerWalker
|
|
VI 850 LCD ; SVEN Power Pro+ series (USB ID ffff:0000).
|
|
|
|
- A regression has been fixed in udev rules file. This previously caused
|
|
permission issues to owners of some USB devices.
|
|
|
|
- Avahi support has been added, for NUT mDNS publication, through a static
|
|
service file (nut/scripts/avahi/nut.service).
|
|
|
|
- usbhid-ups has had Eaton completion: some features have been improved, such
|
|
as 'output.voltage.nominal' ; 3S Eco control support has been added, along
|
|
with battery.runtime.low and end of battery life (life cycle monitoring)
|
|
support ; new measurements for 5 PX are also supported now (outlet power
|
|
factor, power, real power and current).
|
|
|
|
- apcsmart has been updated to support more variables and features ; the
|
|
previous driver is however still available as 'apcsmart-old', in case of
|
|
issues.
|
|
|
|
- bcmxcp now supports per outlet startup and shutdown delays setting ; shutdown
|
|
delay is also used, when available, for outlet.n.shutdown.return instead of
|
|
the default 3 seconds.
|
|
|
|
- snmp-ups.c has a new initialization method, that uses sysObjectID, which is
|
|
a pointer to the prefered MIB of the device, to detect supported devices.
|
|
This speeds up even more init stage and should render void the use of 'mib'
|
|
option. SNMP v3 session initialisation has also been fixed, and Eaton PDU
|
|
support has been completed.
|
|
|
|
- Initial support has been added for systemd, the System and Service Manager
|
|
from RedHat.
|
|
|
|
- The chapter 'NUT configuration management with Augeas' of the developer guide
|
|
has received some completion: a complete Python Augeas example code is now
|
|
provided.
|
|
|
|
- Finally, after years of dedication to NUT, Arjen de Korte is now retired.
|
|
Sincere thanks to you Arjen from us all.
|
|
|
|
---------------------------------------------------------------------------
|
|
Release notes for NUT 2.6.1 - what's new since 2.6.0:
|
|
|
|
- the various recent USB regressions have been definitely fixed.
|
|
|
|
- NUT now propose a variable to expose UPS efficiency (ups.efficiency).
|
|
Eaton 5 PX already uses it.
|
|
|
|
- the Perl module from Gabor Kiss (rewritten from Kit Peters') is now
|
|
distributed with NUT source code.
|
|
|
|
- support for new devices: Eaton Ellipse ECO, Powerware 9140, Eaton 5 PX, and
|
|
ambient sensor on Eaton ePDU managed ; GE EP series ; Inform Sinus SS 210 ;
|
|
IPAR Mini Energy ME 800 ; Mustek Yukai PowerMust 1000 USB ; Numeric 3000 SW ;
|
|
SVEN Power Pro+ series (recent models) ; Vivaldi EA200 LED.
|
|
|
|
- liebert-esp2: Improved Liebert ESP II support, including UPS shutdown
|
|
(poweroff), 1 and 3-phase input and output variables, and most
|
|
input / output / bypass / nominal variables. There is also a fix for the
|
|
USB to serial cable (Farkas Levente and Spiros Ioannou).
|
|
|
|
- powercom has improved PowerCom BNT 1500A and BNT-other support, along with
|
|
driver documentation and code conformance to the NUT rules (Keven L. Ates).
|
|
|
|
- apcsmart has more improved UPS poweroff support and options (Michal Soltys).
|
|
|
|
- blazer has also seen some improvements.
|
|
|
|
- usbhid-ups has completed a bit supported variables for APC and Eaton / MGE.
|
|
|
|
- on the quality assurance side, Eaton has worked on fixing a few non
|
|
conformances, like C++ style comments and warnings, using a newly developed
|
|
verification tool (Prachi Gandhi).
|
|
|
|
- fix remaining references to LIBSSL_LDFLAGS, instead of LIBSSL_LIBS,
|
|
which cause unresolved symbol on libupsclient users (Fabrice Coutadeur).
|
|
|
|
- the website has now a better support for Internet Explorer 6.
|
|
|
|
- graphic illustrations, used for the Features page on the website Features
|
|
and chapter of the user manual, have been refreshed (courtesy of Eaton).
|
|
|
|
- more bugfixes, cleanup and improvements, on both source code and
|
|
documentation.
|
|
|
|
---------------------------------------------------------------------------
|
|
Release notes for NUT 2.6.0 - what's new since 2.4.3:
|
|
|
|
- the main focus of this release is the complete documentation revamping,
|
|
using AsciiDoc. This includes a new website, user manual, developer guide,
|
|
packager guide and manual pages, available in various formats (single and
|
|
multiple pages HTML, and PDF at the moment).
|
|
Be sure to check the --with-doc configure option help, and
|
|
docs/configure.txt for more information.
|
|
|
|
- Add Augeas support, to provide easy NUT configuration management, through
|
|
tools and development APIs. For more information, refer to the developer
|
|
guide, or scripts/augeas/README in the source directory.
|
|
|
|
- support for new devices: APC 5G; Eaton PowerWare 5119 RM (smart mode using
|
|
upscode2 driver), Eaton Best Ferrups (using older ConnectUPS card),
|
|
Eaton 9395 (serial interface), Eaton ConnectUPS X / BD / E Slot;
|
|
HP T1000 INTL, HP T1500 INTL, HP T750 G2, HP R1500 G2 INTL; iDowell iBox UPS;
|
|
Tripp Lite SmartOnline SU1000XLA, Tripp Lite Smart1000LCD, and some
|
|
more USB/HID devices IDs; CyberPower CP1500AVRLCD and CP1350AVRLCD;
|
|
PowerWalker Line-Interactive VI 1400 ; Rocketfish RF-1000VA / RF-1025VA.
|
|
|
|
- usbhid-ups has better support for shutting down APC SmartUPS RM series,
|
|
and finally fix the "buffer size" issue, which was breaking some
|
|
devices data retrieval, or truncating some data on others.
|
|
|
|
- snmp-ups now support SNMP v3 and its security parameters. IETF MIB support
|
|
has also been extended.
|
|
|
|
- fix dummy-ups simulation driver status handling bug, and add the
|
|
capability to remove exposed variables on the fly.
|
|
|
|
- the belkin driver now support control commands and status reporting
|
|
for beeper and battery test.
|
|
|
|
- the powerpanel driver supports more older CyberPower units.
|
|
|
|
- mge-utalk, upscode2, blazer and liebert-esp2 have also received some
|
|
care, and been improved.
|
|
|
|
- NUT-Monitor and the PyNUT client module have been updated to 1.3,
|
|
adding more features like automatic connection to the first local device
|
|
and i18n support.
|
|
|
|
- improve configure time dependencies checking and processing.
|
|
|
|
- improve older Unix systems support (HP-UX, Aix, ...) for missing functions.
|
|
|
|
- refresh and improve USB helper files (udev and UPower).
|
|
|
|
- more generation automation: the ChangeLog file is now generated
|
|
automatically at distribution time, along with the files needed for
|
|
the website hardware compatibility list.
|
|
|
|
- SSL support has also received some improvements.
|
|
|
|
- tcp-wrapper now allows hostnames in /etc/hosts.allow too (not only IPv4
|
|
and/or IPv6 addresses).
|
|
|
|
- many bugfixes, cleanup and improvements.
|
|
|
|
---------------------------------------------------------------------------
|
|
Release notes for NUT 2.4.3 - what's new since 2.4.2:
|
|
|
|
- this is a bugfix release that only solves the regression on IPv6 activation.
|
|
|
|
---------------------------------------------------------------------------
|
|
Release notes for NUT 2.4.2 - what's new since 2.4.1:
|
|
|
|
- the general USB support has been vastly improved, including many bug
|
|
fixes, better OS support, new features and devices.
|
|
|
|
- NUT now talks to Solar Controller Devices with the new ivtscd driver.
|
|
|
|
- the snmp-ups driver supports more PDU, with a smaller disk footprint.
|
|
|
|
- apcsmart supports more older SmartUPS and Matrix units.
|
|
|
|
- the bestfortress driver is resurrected.
|
|
|
|
- the virtual driver has been renamed to 'clone'.
|
|
|
|
- the netxml-ups driver has received some care.
|
|
|
|
- various debugging and development improvements have been done, around
|
|
driver output; dummy-ups with more interaction and scripting and the
|
|
device-recorder.sh script.
|
|
|
|
- the build system has received many bugfixes and improvements.
|
|
|
|
- the UPower (previously known as DeviceKit-power) rules file is now
|
|
generated by NUT.
|
|
|
|
- support for new devices: Apollo 1000A and 1000F; various Baytech RPC; old
|
|
Best Power Fortress; Cyber Power Systems PR3000E, CP 1500C and OR2200LCDRM2U;
|
|
all the new Dell UPS range (serial, USB and network); Eaton E Series NV and
|
|
DX UPS, and Powerware 9130; older HP T500 and T750, newer T750 INTL (USB) and
|
|
R1500 G2 (serial); Inform Informer Compact 1000VA; many serial and USB
|
|
devices from Ippon, like Back Comfo Pro, Smart Power Pro and Smart Winner;
|
|
IVT SCD series; Liebert GXT2-3000RT230 and PowerSure PSA; Mustek PowerMust
|
|
424 / 636 / 848 USB; all new PowerCOM USB devices with HID PDC interface;
|
|
Tripp-Lite INTERNETOFFICE700, SMART700USB and ECO550UPS; UPSonic DS-800
|
|
(USB).
|
|
|
|
---------------------------------------------------------------------------
|
|
Release notes for NUT 2.4.1 - what's new since 2.4.0:
|
|
|
|
- the microdowell driver has appeared to support various MicroDowell Enterprise
|
|
units (see the "new devices" list below).
|
|
|
|
- support for new devices: MicroDowell Enterprise B8, B10, N8, N11, N15, N20,
|
|
N22, N30, N40, N50, N60 and HiBox ST.
|
|
|
|
- NUT-Monitor now better handles the ups.status field, and has switched to
|
|
version 1.1.
|
|
|
|
- the situation of the build toolchain has been fixed, with regard to the
|
|
"make clean" target and the wrongly removed generated USB files. This brokes
|
|
further configure call.
|
|
|
|
---------------------------------------------------------------------------
|
|
Release notes for NUT 2.4.0 - what's new since 2.2.2:
|
|
|
|
- preliminary support for Power Distribution Units (PDUs): NUT now support
|
|
PDUs, either natively (ie using NUT snmp-ups driver), or through a binding to
|
|
the Powerman daemon. The list of supported PDUs is already quite long,
|
|
including: Eaton ePDUs (Managed and Monitored), some Aphel models, some
|
|
Raritan PDUs, and the whole list of Powerman supported devices:
|
|
http://powerman.sourceforge.net/supported.html
|
|
|
|
- support for new devices: the various PDUs cited above, Chloride Desk Power
|
|
650, Cyber Power Systems Value 400E/600E/800E (USB models), Delta GES602N,
|
|
Digitus DN-170020, the whole Eaton ranges (mostly composed of MGE Office
|
|
Protection Systems and Powerware units) including BladeUPS, Forza Power
|
|
Technologies SL-1001, HP PowerTrust 2997A, HP R/T 2200 G2, Infosec XP 1000
|
|
and XP 500, Ippon Back Power Pro (serial and USB), Kebo 1200D/D Series,
|
|
Liebert PowerSure Personal XT, MGE Office Protection Systems Protection
|
|
Station, Neus 400va and 600va, Phasak 400VA and 600VA, Plexus 500VA, Powercom
|
|
Black Knight PRO / King PRO and Imperial, PowerKinetics BlackOut Buster,
|
|
Sweex 1000 USB, UNITEK Alpha 500, WinPower CPM-800.
|
|
|
|
- NUT now embeds Python client support through the PyNUTClient module and the
|
|
NUT-Monitor application. Both are from David Goncalves, and are still
|
|
available from http://www.lestat.st.
|
|
For more information, refer to scripts/python/README.
|
|
|
|
- the dummy-ups driver now support a "repeater" mode. This allows it to act as
|
|
a NUT client, and to forward data. This can be useful for supervision and
|
|
load sharing purposes.
|
|
|
|
- tcp-wrappers support has been added to the upsd server, to grant users access
|
|
by source IP for commands that require to be logged into the server. This
|
|
replaces the previous internal implementation (ACL in upsd.conf).
|
|
|
|
- the nut.conf file has been introduced to standardize startup configuration
|
|
across the various systems.
|
|
|
|
- NUT now ships a bash completion function for 'upsc' command
|
|
(scripts/misc/nut.bash_completion). Simply copy it to /etc/bash_completion.d
|
|
|
|
- many internal changes to improve maintenability, while lowering the
|
|
maintenance cost (thus allowing developers to focus on what matters: the
|
|
code!). Examples of this are:
|
|
- the USB information automatic extraction to generate the various USB helper
|
|
files,
|
|
- the upsdrv_info_t structure to track more driver information, and remove
|
|
the need for the upsdrv_banner() function
|
|
- common USB code refactoring, as it is done for the serial functions.
|
|
|
|
- tons of bugfixes, cleanup and improvements to make NUT stronger than ever!
|
|
|
|
---------------------------------------------------------------------------
|
|
Release notes for NUT 2.2.2 - what's new since 2.2.1:
|
|
|
|
- support for new devices: APC BACK-UPS XS LCD, Atlantis Land,
|
|
Mustek Powermust Office 650, Oneac XAU models, Powerware PW5115 and
|
|
PW9120 (USB), Nitram Elite 2005
|
|
|
|
- Integrated Power Management (NUT HAL integration) has reached a
|
|
major milestone: it is now the most advanced UPS integration into
|
|
Power Management layer known in existing OSs. It has received many
|
|
corrections and improvements, and allows to PowerOff the UPS at the
|
|
end of a power cycle (which is the most important feature, not
|
|
supported on other systems).
|
|
The various files are now installed into the correct location.
|
|
|
|
- the usbhid-ups driver has received attention. Most notably, the
|
|
shutdown handling has been reworked, and support for MGE UPS SYSTEMS
|
|
3 phases units has been added.
|
|
|
|
- snmp-ups now supports MGE* Environment Sensor (ref 66 846).
|
|
The ambient.temperature reporting has also been fixed for units
|
|
other than APC.
|
|
|
|
- the netxml-ups driver has appeared to support MGE* network HTTP/XML
|
|
cards.
|
|
|
|
- NUT now distributes by default the shared version of libupsclient
|
|
(version 1.0.0), and use this for the provided clients (upsmon, upsc,
|
|
upsrw, upscmd). This is part of an effort to reduce NUT's footprint,
|
|
both on disk and in memory.
|
|
|
|
- powerpanel has reach a new step toward the replacement of nitram and
|
|
cpsups drivers. The final step is scheduled for NUT 2.4.
|
|
|
|
- many changes, cleanup and fixes to the NUT core and various drivers.
|
|
|
|
---------------------------------------------------------------------------
|
|
Release notes for NUT 2.2.1 - what's new since 2.2.0:
|
|
|
|
- support for new devices: all MGE Office Protection Systems units,
|
|
Advice TopGuard 2000, Belkin F6H375-USB, Dynamix UPS1700D, Effekta RM2000MH,
|
|
Jageson Technology Jasuny USPS, Powercom SMK-1500A and SXL-1500A,
|
|
PowerWalker Line-Interactive VI 400/800 and 600, Powerware 9110,
|
|
UNITEK Alpha 2600, UPSonic CXR1000, some vintage serial APC UPSs.
|
|
|
|
- the usbhid-ups driver has been improved, and fixed in many areas, through
|
|
a backport of the development (trunk) version.
|
|
|
|
- the udev rules, for Linux hotplug support of the USB UPSs, has been
|
|
updated to support kernel newer than 2.6.22.
|
|
|
|
- the megatec and megatec_usb drivers have also been backported from the
|
|
development (trunk) version.
|
|
|
|
- the client development files have also received some care:
|
|
the upsclient pkg-config file has been fixed, and the upsclient.h
|
|
file allows older NUT clients to continue using the UPSCONN structure.
|
|
|
|
---------------------------------------------------------------------------
|
|
Release notes for NUT 2.2.0 - what's new since 2.0.5:
|
|
|
|
- The new build infrastructure, using automake, is now used.
|
|
This has major impact on the compilation and installation procedures,
|
|
and thus on the NUT packaging.
|
|
For more information, refer to UPGRADING and packaging/debian/ for
|
|
an example of migration.
|
|
|
|
- NUT now provides support for FreeDesktop Hardware Abstraction Layer
|
|
(HAL) which brings full Plug And Play experience to USB UPS owners.
|
|
For more information, refer to docs/nut-hal.txt.
|
|
|
|
- support for new devices: Ablerex 625L, ActivePower 400VA, 2000VA;
|
|
Belkin Home Office F6H350-SER, F6H500-SER, F6H650-SER; Belkin Office
|
|
Series F6C550-AVR; Belkin Universal UPS F6C100-UNV (USB), F6C1100-UNV
|
|
(USB), F6C1200-UNV (USB), F6H350deUNV (serial), F6H350ukUNV (serial),
|
|
F6H650ukUNV (serial); Compaq R3000h; Cyber Power Systems PR2200;
|
|
Dynex DX-800U; Geek Squad GS1285U; Krauler UP-M500VA; Mecer ME-2000;
|
|
MGE UPS SYSTEMS Ellipse MAX; Online Zinto D; PowerTech SMK-800; SVEN
|
|
Power Pro+ series, Power Smart RM 2000; Tripp-Lite SmartOnline
|
|
SU1500RTXL2ua, smart2200RMXL2U.
|
|
|
|
- added IPv6 support,
|
|
|
|
- the newmge-shut driver has appeared. This one uses the same HID core
|
|
as usbhid-ups, but communicate over a serial link. It will eventually
|
|
replace the current mge-shut driver.
|
|
|
|
- client commands (upsc, upsrw and upscmd): hostname is now optional,
|
|
and defaults to "localhost"
|
|
|
|
- many drivers have been improved and have received bug fixes:
|
|
powerpanel, megatec, megatec_usb, safenet, tripplite_usb, gamatronic,
|
|
|
|
- the hotplug and udev scripts, in charge of setting the right
|
|
permissions on the USB devices, are now installed automatically
|
|
when appropriate.
|
|
|
|
- more generally, the NUT core and documentation, including the manpages,
|
|
have been improved and updated.
|
|
|
|
---------------------------------------------------------------------------
|
|
Release notes for NUT 2.0.5 - what's new since 2.0.4:
|
|
|
|
This release is a backport of the development version. Many changes
|
|
have already been backported previously. Thus it is more a
|
|
synchronisation release, though it includes many bugfixes and support
|
|
for new models.
|
|
|
|
- support for new devices: APC Smart-UPS with 6TI firmware; Belkin
|
|
Small Enterprise F6C1500-TW-RK; Compaq R3000 XR, R5500 XR; Cyber
|
|
Power 550SL, 725SL, 685AVR, 800AVR, 1200AVR, AE550; Eltek; Inform
|
|
GUARD; Microsol Rhino; Opti-UPS PowerES 420E; PowerMan RealSmart,
|
|
BackPro; Powerware PW9315 3-phase; SOLA 305; Tripp-Lite
|
|
SMART550USB, SMART2200RMXL2U, OMNI1000LCD, OMNI900LCD, OMNI650LCD,
|
|
1500 LCD, AVR550U; Viewsonic PowerES 420E.
|
|
|
|
- bcmxcp: added 3-phase support
|
|
|
|
- megatec: better hardware support, more instant commands
|
|
|
|
- mge-hid: support more instant commands
|
|
|
|
- newhidups: fixed APC and Tripp Lite bugs, various memory bugs,
|
|
improved report buffering, improved Solaris support, added
|
|
'-x explore' option for easy diagnosis of new devices
|
|
|
|
- solis: shutdown programming, support new cables, Solaris support
|
|
|
|
- tripplite_usb: updated SMARTPRO support, fixed OL/OB reporting,
|
|
better error handling, some memory bugs
|
|
|
|
- new dummy-ups driver simulator
|
|
|
|
- added HTML interface for access to CGI scripts
|
|
|
|
---------------------------------------------------------------------------
|
|
Release notes for NUT 2.0.4 - what's new since 2.0.3:
|
|
|
|
- The newhidups critical bug (segmentation fault) has been fixed. It has
|
|
also received some more care, like buxfixes and new models support and
|
|
enhancement for Solaris.
|
|
[Peter Selinger and Arnaud Quette]
|
|
|
|
- A bug has been fixed in NUT core to support resuming from suspend-to-disk.
|
|
This should also fix other similar issues, like time synchronisation
|
|
through the NTP - Network Time Protocol.
|
|
[Arjen de Korte]
|
|
|
|
- The mge-shut driver now better detects the Low Battery status, support
|
|
new models and fixes some wrong status and data. It also fixes some
|
|
issue where the UPS wasn't restarting (refer to mge-shut manpage).
|
|
[Arnaud Quette]
|
|
|
|
- The genericups custom configuration through ups.conf is working again
|
|
[Arjen de Korte]
|
|
|
|
- The genericups driver type 22 also support CyberPower 725SL
|
|
(and maybe others SL models)
|
|
[David Kaufman]
|
|
|
|
- The new megatec driver, which will replace a bunch of drivers by nut 2.2
|
|
(refer to docs/megatec.txt and UPGRADING) has been backported from the
|
|
trunk (Development tree). The powermust driver has also received some
|
|
attention.
|
|
[Carlos Rodrigues]
|
|
|
|
- The new rhino driver was added to support Microsol Rhino UPS hardware
|
|
The solis has also been improved for solaris compatibility, and
|
|
internal / external shutdown programming. solis can now save external
|
|
shutdown programming to ups, and support new cables for solis 3
|
|
[Silvino B. Magalhães]
|
|
|
|
- Several fixes and improvements have been made to upsrw, upsset,
|
|
cpsups, tripplite_usb and the FAQ.
|
|
[Arjen de Korte and Charles Lepple]
|
|
|
|
---------------------------------------------------------------------------
|
|
Release notes for NUT 2.0.3 - what's new since 2.0.2:
|
|
|
|
- The recent and major newhidups changes have been backported from the
|
|
Development tree. It now:
|
|
- supports models from MGE UPS SYSTEMS, APC and Belkin. Mustek and Unitek
|
|
units are also recognized for development purpose,
|
|
- handles better device reopening, after a disconnection,
|
|
- handles multiple devices, with several parameters to find the right UPS.
|
|
[Peter Selinger, Charles Lepple and Arnaud Quette]
|
|
|
|
- The bcmxcp_usb driver has been added to support Powerware USB units.
|
|
[Wolfgang Ocker and Kjell Claesson]
|
|
|
|
- The tripplite_usb driver has been added to support Tripp Lite USB units.
|
|
[Charles Lepple]
|
|
|
|
- The sec driver is back as gamatronic
|
|
[Gamatronic, Nadav Moskovitch]
|
|
|
|
- The genericups driver has received official care from Gamatronic
|
|
to add support for the Gamatronic UPS with alarm interface.
|
|
[Gamatronic, Nadav Moskovitch]
|
|
|
|
- The powermust driver now supports Soyntec Sekury C 500 and C 800 units.
|
|
[Hanno Borns]
|
|
|
|
- The mge-shut driver has received a bit of attention too, and enhance
|
|
ups.model retrieval for some specific case (release 0.65)
|
|
|
|
- The drivers don't change to the "statepath" directory anymore at
|
|
initialisation time if called using -k. This avoid unneeded
|
|
failure to poweroff the UPS if /var is already unmounted.
|
|
[Gaspar Bakos]
|
|
|
|
- The belkinunv driver now supports Belkin F6C1100-UNV
|
|
[Dave Breiland]
|
|
|
|
- The isbmex driver has been upgraded to version 0.05, which fixes
|
|
various errors in formulas, add shutdown capability and revert
|
|
back baudrate to B9600 (instead of B2400), as it broke the
|
|
communication
|
|
[Ricardo Martinezgarza]
|
|
|
|
- The support of Sysgration UPGUARDS Pro650 in fentonups has
|
|
been fixed
|
|
[Simon J. Rowe]
|
|
|
|
- The packaging files for Red Hat have received various fixes
|
|
[Thomas Jarosch]
|
|
|
|
- The solis driver has been fixed to avoid a naming colision and
|
|
compile on Solaris
|
|
[Paweł Kierdelewicz]
|
|
|
|
- The snmp-ups driver has corrected the problem when exposing
|
|
certain time data.
|
|
|
|
---------------------------------------------------------------------------
|
|
Release notes for NUT 2.0.2 - what's new since 2.0.1:
|
|
|
|
- the newhidups USB driver has been improved a lot and is no more
|
|
experimental. It also now has a basic APC support, which will
|
|
soon replace the legacy hidups driver.
|
|
|
|
- The mge-utalk driver has improved its support for old units.
|
|
|
|
- The mge-shut driver has been improved for restart/shutdown
|
|
sequences which was previously blocking the serial port.
|
|
|
|
- The general MGE support has been added Pulsar EXtreme C / EX RT,
|
|
Comet EX RT, Pulsar SV, Pulsar PSX, Ellipse Office and NOVA AVR USB.
|
|
|
|
- The genericups driver now supports Generic RUPS 2000, AEC MiniGuard
|
|
UPS 700 (using Megatec M2501 cable), and Powerware 3110.
|
|
[Nick Barnes, Paul Andreassen]
|
|
|
|
- The powermust driver now supports SquareOne Power QP1000, Mustek
|
|
PowerMust 1400VA Plus and 2000VA USB.
|
|
[Carlos Rodrigues]
|
|
|
|
- The fentonups driver has been enhanced and now supports Sysgration
|
|
UPGUARDS Pro650.
|
|
[Michel Bouissou, Simon J. Rowe]
|
|
|
|
- The cpsups driver now supports MicroDowell B.Box BP 500/750/1000/1500.
|
|
[Armin Diehl]
|
|
|
|
- The snmp-ups driver now supports Socomec SNMP devices (Netvision MIB),
|
|
and Powerware ConnectUPS SNMP cards.
|
|
[Thanos Chatziathanassiou, Olli Salvia]
|
|
|
|
- The bcmxcp driver is back with support for Powerware UPSs.
|
|
[Tore Øpetveit, Kjell Claesson]
|
|
|
|
- The cyberpower driver now supports CyberPower 1000AVR.
|
|
[Dave Huang]
|
|
|
|
- The new solis driver supports Microsol units: Solis 1.0, 1.5,
|
|
2.0 and 3.0.
|
|
[Silvino B. Magalhaes]
|
|
|
|
- The apcsmart driver has fixed APC600 support.
|
|
|
|
- The etapro driver fixes brokeness due to ser_get_line use
|
|
[Marek Michalkiewicz]
|
|
|
|
- The new upscode2 driver supports Fiskars, Compaq and Powerware
|
|
devices.
|
|
[Niels Baggesen, Havard Lygre]
|
|
|
|
- The tripplite driver has fixed a battery charge bug
|
|
[Cedric Tefft]
|
|
|
|
---------------------------------------------------------------------------
|
|
Release notes for NUT 2.0.1 - what's new since 2.0.0:
|
|
|
|
- The bestuferrups driver has been forked into the new bestfcom driver
|
|
which has better handling of the inverter status alarm messages and
|
|
more.
|
|
[Kent Hill]
|
|
|
|
- Mustek UPS support returns with two drivers which have overlapping
|
|
coverage: mustek and powermust.
|
|
[powermust: Carlos Rodrigues, mustek: Martin Hajduch]
|
|
|
|
- Additional CyberPower Systems hardware is supported with the new
|
|
cpsups driver. Three recognized models are the CPS1500AVR,
|
|
CPS1100VA, and OP500TE.
|
|
[Walt Holman, Brad Sawatzky]
|
|
|
|
- The genericups driver can now generate staleness warnings in
|
|
specific cases where the UPS provides a way to test for its
|
|
presence. See the "CON" setting in ups.conf for more details.
|
|
[stan / saticed.me.uk]
|
|
|
|
- Documentation for monitoring a Back-UPS RS 500 on a system without
|
|
USB ports has been added to the cables directory.
|
|
[Martin Edlman]
|
|
|
|
- The everups driver now supports types 73-76 (NET 700/1000/1400/500-DPC)
|
|
[hunter]
|
|
|
|
- The new metasys driver supports Meta System models: Line,
|
|
HF Millennium, HF Top Line, ECO Network, ECO, Ally HF, Megaline
|
|
[BlaXwan]
|
|
|
|
- The ippon driver now allows user-defined settings for the delay
|
|
before switching off, and the delay before powering on.
|
|
[Yuri Elizarov]
|
|
|
|
- The victronups driver is now at version 0.1.9, which adds many
|
|
instant commands: calibration control, battery and front panel tests,
|
|
and bypass control.
|
|
[Gert Lynge]
|
|
|
|
- The tripplite driver has recieved a major overhaul to bring it up to
|
|
working condition for the 2.0 tree, including code cleanups, several
|
|
new variables, commands, and user-definable parameters. See
|
|
ChangeLog for more.
|
|
[Nicholas J Kain]
|
|
|
|
- The mge-utalk driver has been upgraded to version 0.81, which fixes
|
|
the lack of read-write variables and loss of sync on models which
|
|
don't support restoring settings.
|
|
[Arnaud Quette]
|
|
|
|
- The Micro Ferrups model RE is now supported by the bestuferrups
|
|
driver. The driver will also now read the ambient temperature and
|
|
will no longer constantly report the data as stale.
|
|
[Tim Thompson]
|
|
|
|
- The fentonups driver's init sequence has been reworked to work better
|
|
with some hardware, including a fix to the parser code.
|
|
[MLH]
|
|
|
|
- A workaround has been added to the hidups driver to avoid variables
|
|
which are stuck by calling HIDIOCINITREPORT in every poll.
|
|
[Stuart D. Gathman]
|
|
|
|
- SOLA 610 UPS hardware and others which do not support the ID command
|
|
may now be monitored by the bestups driver after forcing ID= in
|
|
ups.conf.
|
|
[Jason White]
|
|
|
|
- "pollinterval" is now available via driver.parameter for consistency.
|
|
[Arnaud Quette]
|
|
|
|
- The mge-shut and newhidups drivers, along with the supporting
|
|
hidparser/libhid code have received many updates, including lowering
|
|
USB bandwidth consumption, driver unbinding (only in Linux), code
|
|
cleanups, and more which can be seen in the ChangeLog file.
|
|
[Arnaud Quette]
|
|
|
|
- The fentonups driver now recognizes several more Megatec protocol
|
|
units:
|
|
|
|
SuperPower HP360, Hope-550 [Denis Zaika]
|
|
Unitek Alpha 1000is [Antoine Cuvellard]
|
|
|
|
- Some variables like uc_sigmask were renamed to avoid clashes with
|
|
symbols on systems like HP/UX.
|
|
|
|
- All man pages have been reworked to switch literal "-" characters to
|
|
hyphens or "\-" as appropriate.
|
|
[Shaul Karl]
|
|
|
|
- upssched's CANCEL events were broken following the change to
|
|
text-based socket messages in 1.5 and have been fixed.
|
|
[Steven Schoch]
|
|
|
|
- Calls to varargs functions with raw strings from the config files
|
|
without an intervening "%s" have been fixed in upsmon, upssched,
|
|
snmp-ups and upsd.
|
|
[Ulf Harnhammar]
|
|
|
|
---------------------------------------------------------------------------
|
|
Release notes for NUT 2.0.0 - what's new since 1.4.x:
|
|
|
|
- The new naming scheme for variables and commands (introduced in 1.4)
|
|
is now mandatory. The 1.4 tree supported both the old (STATUS) and
|
|
the new (ups.status) as a transitional release, and now that time is
|
|
over.
|
|
|
|
This means that 2.0 is generally smaller than 1.4 code, since the
|
|
interim compatibility hacks have been removed.
|
|
|
|
- New serial handling code has been added, with greatly simplified
|
|
operations. The old mess involving repeated calls to sigaction,
|
|
alarm, and read has been condensed to a select-read loop.
|
|
|
|
This change allows drivers which don't do any serial communications
|
|
at all (hidups, snmp-ups) to drop that baggage, so they are a bit
|
|
smaller when compiled.
|
|
|
|
- The drivers now recognize "chroot=' and 'user=' in the global section
|
|
of ups.conf. This means you don't have to use -r and -u when
|
|
starting upsdrvctl.
|
|
|
|
- upsmon now supports the -K argument to check for the presence of the
|
|
POWERDOWNFLAG file. If it exists and contains the magic string, then
|
|
upsmon will exit(EXIT_SUCCESS). Otherwise, it will
|
|
exit(EXIT_FAILURE).
|
|
|
|
This feature can be used to simplify shutdown scripts, since now you
|
|
don't have to keep the script in sync with the upsmon.conf.
|
|
|
|
- Many small things like signed value comparisons, int vs. size_t and
|
|
proper use of const/struct were fixed throughout the source. These
|
|
were mostly for correctness, but a few potential bugs involving very
|
|
big or very small numbers were fixed at the same time.
|
|
|
|
- The access control system in upsd.conf has been reworked and
|
|
simplified. Since access levels have become meaningless in recent
|
|
releases, the new system is just ACCEPT <acl> or REJECT <acl>.
|
|
|
|
If you are upgrading from a previous version of the software, you
|
|
will have to edit your upsd.conf to use this method. See
|
|
the UPGRADING file for more details.
|
|
|
|
- The build process now halts when make fails in one of the
|
|
subdirectories.
|
|
[Petter Reinholdtsen, Charles Lepple]
|
|
|
|
- Helper data for using upsclient via pkgconfig is now created if
|
|
pkgconfig is detected when configure runs.
|
|
[Arnaud Quette]
|
|
|
|
- The polling interval in drivers may now be set with 'pollinterval'
|
|
in ups.conf.
|
|
[Gabriel Faber]
|
|
|
|
- Blazer UPS equipment is now supported with the blazer driver.
|
|
[Phil Hutton]
|
|
|
|
- Energizer USB UPS hardware is now supported on Linux with a new
|
|
experimental driver.
|
|
[Viktor T. Toth]
|
|
|
|
- The newhidups driver has been merged as the first step towards
|
|
portable USB UPS support. This will eventually replace the old
|
|
Linux-only hidups driver. The newhidups driver is tagged
|
|
experimental since it is under active development.
|
|
[Arnaud Quette, Charles Lepple]
|
|
|
|
- The newapc driver has been renamed to apcsmart, replacing the old
|
|
driver with that name. If you used the newapc driver, be sure to
|
|
delete the old binary and fix your ups.conf.
|
|
|
|
- The apcsmart driver now supports asynchronous notification data
|
|
from the hardware, which means it can wake up as soon as something
|
|
happens. This affects the OL/OB/LB/RB data in ups.status, and
|
|
generally reduces the latency in dispatching status changes by a few
|
|
seconds.
|
|
|
|
- The apcsmart driver can now support quirky hardware which does not
|
|
provide the usual listing of valid command characters. This feature
|
|
is necessary to monitor new models like the APC CS 350 and old ones
|
|
like the Matrix 5000. It also now has sdtype=4 to handle the strange
|
|
shutdown behavior on the CS series.
|
|
|
|
- The belkin driver now works around broken firmware version 001,
|
|
avoiding a lengthy delay at startup. It also implements the shutdown
|
|
sequence differently, and should actually work on more hardware now.
|
|
|
|
- The bestups driver has been slowed down to play nicer with the
|
|
hardware, and is much more reliable as a result. Among other things,
|
|
it should always detect the UPS on the first try, meaning no more
|
|
"dot dot dot" when it starts.
|
|
|
|
- The cyberpower driver is no longer tagged experimental, and now
|
|
supports powering off the load. It also supports battery tests via
|
|
instcmds.
|
|
|
|
- Effekta MT 2000 RM hardware is now supported by the fentonups driver.
|
|
[christoph moar]
|
|
|
|
- The new safenet driver supports UPS hardware that uses the protocol
|
|
of the same name. This includes models from many manufacturers,
|
|
including Fairstone, Fenton, Gemini, Powerwell, Repotec, Soltec and
|
|
Sweex. See the README or driver.list for the full details.
|
|
[Arjen de Korte]
|
|
|
|
- The genericups driver now has type 20 to monitor the Powerware 5119
|
|
RM. See http://lists.exploits.org/ups/Oct2003/00052.html.
|
|
[Daniel Thompson]
|
|
|
|
- The belkinunv driver has been added to allow monitoring Belkin
|
|
Universal UPS hardware.
|
|
[Peter Selinger]
|
|
|
|
- Cyber Power Systems 1100AVR hardware which has a different protocol
|
|
than the existing binary type (supported by 'cyberpower') is now
|
|
supported by the experimental cyberpower1100 driver.
|
|
[Walt Holman]
|
|
|
|
- upsdrvctl now returns success or failure information in the exit
|
|
code. Any failure during a requested operation will result in a
|
|
nonzero value (specifically EXIT_FAILURE).
|
|
|
|
---------------------------------------------------------------------------
|
|
Release notes for NUT 1.4.0 - what's new since 1.2.x:
|
|
|
|
- The drivers and upsd now communicate over Unix domain sockets instead
|
|
of state files, shared memory, or state files with mmap. This change
|
|
makes many things possible, including the new dynamic variable and
|
|
command naming scheme described below.
|
|
|
|
There is a new development tool called sockdebug in the server
|
|
directory for debugging driver-server communications on the sockets.
|
|
|
|
- The old static variable scheme has been replaced by a new dynamic
|
|
implementation. Vague names have been turned into meaningful names
|
|
that fit into an organized system. UTILITY is now input.voltage.
|
|
OUTVOLT is now output.voltage.
|
|
|
|
This also applies to the names of instant commands. BTEST1 is
|
|
test.battery.start, and BTEST0 is test.battery.stop.
|
|
|
|
The old names are still supported for compatibility with older
|
|
clients. This compatibility mode will be maintained throughout
|
|
the 1.4 series, and will be gone by the release of 2.0. Users
|
|
with older clients are encouraged to upgrade their software
|
|
during this time.
|
|
|
|
- The network protocol has been expanded to handle these new names.
|
|
Older functions which only apply to the old names will continue to
|
|
be supported through the 1.4 series.
|
|
|
|
- The drivers and server (upsd) can now change their user ids and
|
|
chroot themselves with the new -u and -r arguments. This lets you
|
|
create a "chroot jail" with the bare minimum components.
|
|
|
|
This technique is used to provide a higher degree of security. If
|
|
someone exploited upsd to get a shell somehow, they would be stuck
|
|
in the jail.
|
|
|
|
- upssched now explicitly confirms reception of timer commands before
|
|
exiting. This was done to avoid a race where one process would
|
|
exit right when another one was starting. The second one would
|
|
believe its command had been handled when it had been lost.
|
|
|
|
- upslog has been reworked to use standard getopt parsing to provide
|
|
the monitoring settings. The old way of specifying arguments is
|
|
still supported for backwards compatibility.
|
|
|
|
upslog has also been changed to only parse the format string once,
|
|
rather than doing it every time through the loop. This should
|
|
provide a minuscule drop in CPU utilization.
|
|
|
|
- Usernames are now required in upsmon and upsd. This means that you
|
|
must add a username to your MONITOR lines in upsmon.conf and then
|
|
create a matching user in upsd.users.
|
|
|
|
Installations from the 1.2 era probably already use usernames, so
|
|
this mostly affects those from 1.0 and before.
|
|
|
|
- Drivers are now pinged regularly by upsd when they aren't posting
|
|
updates about the UPS status. This provides another check in the
|
|
data validation process. If upsd fails to get a response within
|
|
a few seconds, the UPS will be marked stale.
|
|
|
|
- A few minor memory leaks were discovered with valgrind and squashed.
|
|
|
|
- upsstats now reuses connections to upsd when cycling through multiple
|
|
entries in the hosts.conf. This makes things a bit faster and
|
|
avoids some of the noise in the syslog.
|
|
|
|
This only applies to entries that are adjacent. To take advantage
|
|
of this feature, you may have to rearrange them.
|
|
|
|
MONITOR ups-1@host-1 ...
|
|
MONITOR ups-1@host-2 ...
|
|
MONITOR ups-2@host-2 ...
|
|
MONITOR ups-3@host-3 ...
|
|
|
|
Connection reuse for nonadjacent entries may be considered in the
|
|
future.
|
|
|
|
- upsd now warns about insecure configuration files at startup.
|
|
These files (upsd.conf, upsd.users, and the certfile) should
|
|
only be readable by upsd. Never make them world-readable.
|
|
|
|
- The programs no longer print "shutting down" when they are just
|
|
exiting. This was changed to avoid confusion about the term, since
|
|
"shutting down" has a special meaning in UPS software.
|
|
|
|
- Signal handlers no longer do any significant amount of work. Some of
|
|
the programs used to do numerous things in there, raising concerns
|
|
about reentrancy. They now set flags and allow the main loop to do
|
|
the actual work from there.
|
|
|
|
- A bug in upsmon where NOTIFYFLAG settings could be ignored was fixed.
|
|
|
|
- Group handling has been changed. configure no longer accepts
|
|
--with-group, and the programs no longer setgid() to a hardcoded
|
|
value. They now setgid() to the primary group of whatever the
|
|
user value may be.
|
|
|
|
This may be compiled in with --with-user as before, and many programs
|
|
accept -u to override it at runtime.
|
|
|
|
- The state path is no longer created during 'make install'. Users
|
|
are now expected to create it themselves. This removes a lot of
|
|
evil complexity from the build and install sequences.
|
|
|
|
- upsd no longer implements the DROP access command, as it
|
|
could confuse the clients by getting them out of sync. DROP is now
|
|
implemented as DENY, which sends an error message. If you use DROP,
|
|
you should change it to DENY rather than relying on this
|
|
compatibility measure.
|
|
|
|
- The belkin driver no longer reports OFF and OL at the same time.
|
|
|
|
- The bestups driver no longer sleeps during polls, which makes it
|
|
more responsive to things like instant commands.
|
|
|
|
- The cyberpower driver now has much better hardware detection code
|
|
and no longer freezes at startup under some conditions. It also now
|
|
supports the shutdown function. Instant commands for shutdowns and
|
|
battery tests were also added.
|
|
|
|
- The dummyups testing driver has been removed. The dummycons testing
|
|
driver can do everything that dummyups once did and much more.
|
|
dummycons is also now built by default for easier testing.
|
|
|
|
- The newapc driver has been reworked to take advantage of the new
|
|
internal driver state functions. Some variables without an obvious
|
|
purpose were dropped.
|
|
|
|
- The newapc driver now sends all five bytes when using sdtype 1.
|
|
Previously it didn't send the entire string, and it didn't work.
|
|
[Don Lewis]
|
|
|
|
- The hidups driver has been expanded to allow for setting variables,
|
|
a shutdown sequence, and more.
|
|
[Arnaud Quette]
|
|
|
|
- The mge-utalk driver had trouble establishing communications in
|
|
some cases due to the RTS line being set. This has been fixed.
|
|
|
|
The mge-shut driver has been added to the tree, and has replaced
|
|
the older mge-ellipse driver.
|
|
[Arnaud Quette, Philippe Marzouk]
|
|
|
|
- Outlet-level control has been defined in the variable tree, and will
|
|
be added to drivers where the hardware supports it. This can be
|
|
used to shut down some components earlier than others to prolong
|
|
your runtime on battery.
|
|
|
|
This is supported in the mge-shut driver now, and may show up in
|
|
others before long.
|
|
[Arnaud Quette]
|
|
|
|
- KIN-2200AP hardware is now recognized by the powercom driver.
|
|
This change may also support other KIN-xxxxAP equipment.
|
|
[Preston A. Elder]
|
|
|
|
- The 1.1kVA UPS is now supported by the bestuferrups driver. This
|
|
driver was also changed to allow easy addition of more models
|
|
in the future.
|
|
[Bob Apodaca]
|
|
|
|
- The fentonups driver can now handle devices which implement the
|
|
"I" detection differently, and now supports the Giant/WELI 500
|
|
as a result.
|
|
[Joon Guillen]
|
|
|
|
- The serial number of the UPS being monitored can now be specified
|
|
with serial= in ups.conf in the genericups driver.
|
|
[Shaul Karl]
|
|
|
|
- The newapc driver now sends ESC to break out of menus when the
|
|
initial detection fails. Some new APC models have interactive menus
|
|
on the serial port, and the driver couldn't handle them before.
|
|
|
|
- The snmp-ups driver now reports ambient temperature and humidity
|
|
data for APC equipment. It also now supports the shutdown.reboot and
|
|
shutdown.reboot.graceful commands.
|
|
[Dmitry Frolov]
|
|
|
|
- The list of supported variables and commands in the snmp-ups driver
|
|
has been expanded.
|
|
[Arnaud Quette, J.W. Hoogervorst]
|
|
|
|
- Various drivers now report bypass mode with the BYP status word.
|
|
[Arnaud Quette]
|
|
|
|
- Energy Sistem equipment is now supported with the esupssmart driver.
|
|
[Antonio Trujillo Coronado]
|
|
|
|
- The Tripp-Lite SU series (SmartOnline) is supported with the new
|
|
tripplitesu driver.
|
|
[Allan Hessenflow]
|
|
|
|
- The HP PowerTrust A2994A is now recognized by the hp driver.
|
|
[Jan Sporbeck]
|
|
|
|
- Many drivers were cleaned up to perform basic sanity checks on the
|
|
status data before using it.
|
|
|
|
- An explicit cleanup function has been added to the driver core to
|
|
ensure that all dynamic resources are freed before exiting. This
|
|
is part of the larger process to check for memory leaks and other
|
|
bad things.
|
|
[Arnaud Quette]
|
|
|
|
- upsd now provides variable descriptions from an auxiliary file.
|
|
This file is optional, which allows for a smaller memory footprint.
|
|
It can also be edited for localization or other customizations.
|
|
|
|
- upsimage and upsstats can now render BATTVOLT data.
|
|
[Andrew R. Ghali]
|
|
|
|
- String handling has been cleaned up throughout the tree. Calls to
|
|
functions like strcpy and strcat were either replaced with other
|
|
(range-checking) functions or were rewritten to avoid it.
|
|
|
|
- Many compile-time defaults may now be overridden at runtime. In
|
|
the environment NUT_CONFPATH and NUT_STATEPATH may be used.
|
|
upsdrvctl has been changed to execve to pass these along to the
|
|
drivers. ups.conf now supports driverpath=, and upsd.conf supports
|
|
DATAPATH.
|
|
[Bryan Henderson]
|
|
|
|
- The configure --with-gd switches now actually do something useful
|
|
when gd has been installed outside the default search directories.
|
|
[Patrik Schindler]
|
|
|
|
- The inline keyword is now handled properly on systems which do not
|
|
support it or have it specified as another name. This was breaking
|
|
compiles on some systems.
|
|
[Petter Reinholdtsen]
|
|
|
|
---------------------------------------------------------------------------
|
|
Release notes for NUT 1.2.2 - what's new since 1.2.1:
|
|
|
|
- The snmp-ups driver has been upgraded and expanded. It now supports
|
|
multiple MIBs, meaning it can handle RFC 1628, APCC, and MGE
|
|
equipment. You can pick the right one with "mibs=" in ups.conf.
|
|
|
|
Support for setting variable and instant commands is also available.
|
|
[Arnaud Quette and Dmitry Frolov]
|
|
|
|
- The powernet driver has been upgraded. It now supports more
|
|
variables, has cleaner logging, and may now be considered stable.
|
|
[Dmitry Frolov]
|
|
|
|
- The hidups driver now supports physical port IDs. This avoids most
|
|
of the problems where the hiddev* names can jump around too easily.
|
|
It will now stay in the same place as long as you keep it plugged
|
|
into the same physical port. See the ChangeLog file for more details.
|
|
[David Brownell]
|
|
|
|
- The hidups driver now also supports the MFR variable on APC
|
|
Back-UPS ES equipment.
|
|
[Jonathan A. Davis]
|
|
|
|
- The sms driver has been updated to version 0.70.
|
|
[Marcio Gomes]
|
|
|
|
- The bestups driver now recognizes Best Power Axxium Rackmount
|
|
equipment.
|
|
[Ales Casar]
|
|
|
|
- The liebert driver now uses O_NONBLOCK, and should now work
|
|
consistently on OpenBSD as a result.
|
|
[Alex Cichowski]
|
|
|
|
- The liebert driver also now uses debouncing logic on the status
|
|
lines. It was possible to get false readings that would start a
|
|
shutdown or just annoy users with excessive onbatt/online notify
|
|
messages. The new code forces the status to settle down for 3 polls
|
|
before accepting the new value.
|
|
|
|
This means that very short power events may not be detected. The
|
|
alternative is having your machine shut down just because it decided
|
|
to wiggle over to OB LB for a few seconds.
|
|
|
|
- upsmon has had the disconnect logic fixed so the "communications
|
|
lost" (COMMBAD) notify will actually go out when the connection
|
|
fails.
|
|
[Steve Monett]
|
|
|
|
- upssched now uses a lock file to prevent a race where two could
|
|
start at the same time. The second upssched would "win", and the
|
|
first one would be unreachable. This had the side-effect of not
|
|
being able to cancel timers on the first one.
|
|
|
|
If you use upssched, you must define the LOCKFN directive when
|
|
upgrading to this version, or it will not work.
|
|
[Gaspar Bakos]
|
|
|
|
- The packaging and scripts for Red Hat systems have been updated.
|
|
[Antonino Albanese]
|
|
|
|
- upsd is now a bit more lenient about access levels in the
|
|
'numlogins' check, which is what caused the problem in upsmon
|
|
(next item).
|
|
|
|
- upsmon no longer gets stuck in slavesync() when upsd is configured
|
|
to drop certain queries. This usually happened at the worst
|
|
possible time: in the middle of a shutdown.
|
|
[John David Garza]
|
|
|
|
- The upsclient functions now do more sanity checking on data from
|
|
upsd so a short read won't return garbage to the callers.
|
|
|
|
- upsset now works properly with ENUM/VARTYPE values for multiple
|
|
UPSes on a single upsd.
|
|
[Dmitry Frolov]
|
|
|
|
- Various portability fixes for building on SGI were applied.
|
|
[Andrea Suatoni]
|
|
|
|
- upsd no longer tries to reference a deleted client structure if the
|
|
client disconnects at the wrong time. Previously, it tried to use
|
|
that pointer after the sendback() function had already failed on
|
|
write and deleted the client. This could cause upsd to segfault
|
|
depending on what areas were accessed.
|
|
[Patrik Schindler]
|
|
|
|
---------------------------------------------------------------------------
|
|
|
|
Release notes for NUT 1.2.1 - what's new since 1.2.0:
|
|
|
|
- The sms driver is back, with support for Microlink Manager III
|
|
hardware. [Marcio Gomes]
|
|
|
|
- Fideltronik Ares Series hardware is now supported as genericups type
|
|
19. [Tomek Orzechowski and Arkadiusz Mikiewicz]
|
|
|
|
- The drivers no longer silently drop instant commands or set commands
|
|
from upsd that happen to get fragmented in transit.
|
|
[linux@horizon.com]
|
|
|
|
- The old multilink driver is back with a new name: liebert. It
|
|
supports Liebert UPStation GXE hardware with the contact-closure
|
|
cable. This is currently an experimental driver as there is no
|
|
way to power down the load.
|
|
|
|
- configure now picks up the right flags for gd automatically if gd
|
|
2.0.8 or higher is installed. This greatly simplifies the CGI build
|
|
process for most users.
|
|
|
|
- Shutdowns on FreeBSD using the genericups driver should work again.
|
|
[Petri Riihikallio]
|
|
|
|
---------------------------------------------------------------------------
|