343 lines
12 KiB
Groff
343 lines
12 KiB
Groff
.TH GENERICUPS 8 "Thu Aug 11 2005" "" "Network UPS Tools (NUT)"
|
|
.SH NAME
|
|
genericups \- Driver for contact\(hyclosure UPS equipment
|
|
|
|
.SH NOTE
|
|
This man page only documents the specific features of the genericups
|
|
driver. For information about the core driver, see \fBnutupsdrv\fR(8).
|
|
|
|
.SH SUPPORTED HARDWARE
|
|
This driver supports hardware from many different manufacturers as it only
|
|
uses the very simplest of signaling schemes. Contact closure refers to a
|
|
kind of interface where basic high/low signals are provided to indicate
|
|
status. This kind of UPS can only report line power and battery status.
|
|
|
|
This means that you will only get the essentials in ups.status: OL, OB,
|
|
and LB. Anything else requires a smarter UPS.
|
|
|
|
.SH CABLING
|
|
Cabling is different for every kind of UPS. See the table below for
|
|
information on what is known to work with a given UPS type.
|
|
|
|
.SH EXTRA ARGUMENTS
|
|
This driver supports the following settings in the \fBups.conf\fR(5):
|
|
|
|
.IP "upstype=\fItype\fR"
|
|
|
|
Required. Configures the driver for a specific kind of UPS. See the UPS
|
|
Types section below for more information on which entries are available.
|
|
|
|
.IP "mfr=\fIstring\fR"
|
|
|
|
Optional. The very nature of a generic UPS driver sometimes means that
|
|
the stock manufacturer data has no relation to the actual hardware that is
|
|
attached. With the mfr setting, you can change the value that is seen by
|
|
clients that monitor this UPS.
|
|
|
|
.IP "model=\fIstring\fR"
|
|
|
|
Optional. This is like mfr above, but it overrides the model string
|
|
instead.
|
|
|
|
.IP "serial=\fIstring\fR"
|
|
|
|
Optional. This is like mfr above and intended to record the identification
|
|
string of the UPS. It is titled serial because usually this string is
|
|
referred to as the serial number.
|
|
|
|
.IP "sdtime=\fIvalue\fR"
|
|
|
|
Optional. The driver will sleep for this many seconds after setting the
|
|
shutdown signal. This is necessary for some hardware which requires a
|
|
sustained level to activate the shutdown sequence.
|
|
|
|
The default behavior of the driver is to exit immediately. If this
|
|
doesn't reliably trigger a shutdown in your UPS hardware, use this
|
|
setting to give it more time to react.
|
|
|
|
Note: very large values for sdtime may create warnings from upsdrvctl if
|
|
it gets tired of waiting for the driver to return.
|
|
|
|
.SH CUSTOM CONFIGURATIONS
|
|
|
|
You may override the values for CP, OL, LB, and SD by defining them in
|
|
the \fBups.conf\fR after the upstype setting.
|
|
|
|
For example, to set the cable power to DTR and the low battery value to
|
|
DCD, it would look like this:
|
|
|
|
CP = DTR
|
|
|
|
LB = DCD
|
|
|
|
Recognized values for input lines are CTS, DCD, and RNG. Recognized
|
|
values for output lines are DTR, RTS, and ST. See below for more about
|
|
what these signals mean.
|
|
|
|
These values may be negated for active low signals. That is, "LB=\-DCD"
|
|
recognizes a low battery condition when DCD is not held high.
|
|
|
|
.SH TYPE INFORMATION
|
|
The essence of a UPS definition in this driver is how it uses the serial
|
|
lines that are available. These are the abbreviations you will see below:
|
|
|
|
OL \(hy On line (no power failure) (opposite of OB \(hy on battery)
|
|
|
|
LB \(hy Low battery
|
|
|
|
SD \(hy Shutdown load
|
|
|
|
CP \(hy Cable power (must be present for cable to have valid reading)
|
|
|
|
CTS \(hy Clear to Send. Received from the UPS.
|
|
|
|
RTS \(hy Ready to Send. Sent by the PC.
|
|
|
|
DCD \(hy Data Carrier Detect. Received from the UPS.
|
|
|
|
RNG \(hy Ring indicate. Received from the UPS.
|
|
|
|
DTR \(hy Data Terminal Ready. Sent by the PC.
|
|
|
|
DSR \(hy Data Set Ready. Received from the UPS.
|
|
|
|
ST \(hy Send a BREAK on the transmit data line
|
|
|
|
A \- in front of a signal name (like \-RNG) means that the indicated
|
|
condition is signaled with an active low signal. For example, [LB=\-RNG]
|
|
means the battery is low when the ring indicate line goes low, and that
|
|
the battery is OK when that line is held high.
|
|
|
|
.SH UPS TYPES
|
|
|
|
0 = UPSonic LAN Saver 600
|
|
[CP=DTR+RTS] [OL=\-CTS] [LB=DCD] [SD=DTR]
|
|
|
|
1 = APC Back\(hyUPS/Back\(hyUPS Pro/Smart\(hyUPS with 940\-0095A/C cable
|
|
[CP=DTR] [OL=\-RNG] [LB=DCD] [SD=RTS]
|
|
|
|
2 = APC Back\(hyUPS/Back\(hyUPS Pro/Smart\(hyUPS with 940\-0020B cable
|
|
[CP=RTS] [OL=\-CTS] [LB=DCD] [SD=DTR+RTS]
|
|
|
|
Type 2 has also been reported to work with the 940\-0020C cable.
|
|
|
|
3 = PowerTech Comp1000 with DTR cable power
|
|
[CP=DTR] [OL=CTS] [LB=DCD] [SD=DTR+RTS]
|
|
|
|
4 = Generic RUPS Model
|
|
[CP=RTS] [OL=CTS] [LB=\-DCD] [SD=\-RTS]
|
|
|
|
5 = Tripp Lite UPS with Lan2.2 interface (black 73\-0844 cable)
|
|
[CP=DTR] [OL=CTS] [LB=\-DCD] [SD=DTR+RTS]
|
|
|
|
6 = Best Patriot with INT51 cable
|
|
[CP=DTR] [OL=CTS] [LB=\-DCD] [SD=RTS]
|
|
|
|
7 = CyberPower Power99
|
|
also Upsonic Power Guardian PG\-500
|
|
|
|
Also Belkin Belkin Home Office
|
|
F6H350\-SER, F6H500\-SER, F6H650\-SER
|
|
|
|
[CP=RTS] [OL=CTS] [LB=\-DCD] [SD=DTR]
|
|
|
|
8 = Nitram Elite 500
|
|
[CP=DTR] [OL=CTS] [LB=\-DCD] [SD=???]
|
|
|
|
9 = APC Back\(hyUPS/Back\(hyUPS Pro/Smart\(hyUPS with 940\-0023A cable
|
|
[CP=none] [OL=\-DCD] [LB=CTS] [SD=RTS]
|
|
|
|
10 = Victron Lite with crack cable
|
|
[CP=RTS] [OL=CTS] [LB=\-DCD] [SD=DTR]
|
|
|
|
11 = Powerware 3115
|
|
[CP=DTR] [OL=\-CTS] [LB=\-DCD] [SD=ST]
|
|
|
|
12 = APC Back\-UPS Office with 940\-0119A cable
|
|
[CP=RTS] [OL=\-CTS] [LB=DCD] [SD=DTR]
|
|
|
|
13 = RPT Repoteck RPT\-800A/RPT\-162A
|
|
[CP=DTR+RTS] [OL=DCD] [LB=\-CTS] [SD=ST]
|
|
|
|
14 = Online P\-series
|
|
[CP=DTR] [OL=DCD] [LB=\-CTS] [SD=RTS]
|
|
|
|
15 = Powerware 5119, 5125
|
|
[CP=DTR] [OL=CTS] [LB=\-DCD] [SD=ST]
|
|
|
|
16 = Nitram Elite 2002
|
|
[CP=DTR+RTS] [OL=CTS] [LB=\-DCD] [SD=???]
|
|
|
|
17 = PowerKinetics 9001
|
|
[CP=DTR] [OL=CTS] [LB=\-DCD] [SD=???]
|
|
|
|
18 = TrippLite Omni 450LAN with Martin's cabling
|
|
[CP=DTR] [OL=CTS] [LB=DCD] [SD=none]
|
|
|
|
http://lists.exploits.org/upsdev/Jul2002/00012.html
|
|
|
|
19 = Fideltronic Ares Series
|
|
[CP=DTR] [OL=CTS] [LB=\-DCD] [SD=RTS]
|
|
|
|
20 = Powerware 5119 RM
|
|
[CP=DTR] [OL=\-CTS] [LB=DCD] [SD=ST]
|
|
|
|
Check docs/cables/powerware.txt
|
|
|
|
21 = Generic RUPS 2000 (Megatec M2501 cable)
|
|
[CP=RTS] [OL=CTS] [LB=\-DCD] [SD=RTS+DTR]
|
|
|
|
http://lists.exploits.org/upsdev/Oct2004/00004.html
|
|
|
|
22 = Gamatronic All models with alarm interface
|
|
also CyberPower SL series
|
|
|
|
[CP=RTS] [OL=CTS] [LB=\-DCD] [SD=DTR]
|
|
|
|
.SH SIMILAR MODELS
|
|
|
|
Many different UPS companies make models with similar interfaces. The
|
|
RUPS cable seems to be especially popular in the "power strip" variety of
|
|
UPS found in office supply stores. If your UPS works with an entry in the
|
|
table above, but the model or manufacturer information don't match,
|
|
don't despair. You can fix that easily by using the mfr and model
|
|
variables documented above in your \fBups.conf\fR(5).
|
|
|
|
.SH TESTING COMPATIBILITY
|
|
|
|
If your UPS isn't listed above, you can try going through the list until
|
|
you find one that works. There is a lot of cable and interface reuse in
|
|
the UPS world, and you may find a match.
|
|
|
|
To do this, first make sure nothing important is plugged into the
|
|
outlets on the UPS, as you may inadvertently switch it off. Definitely
|
|
make sure that the computer you're using is not plugged into that UPS.
|
|
Plug in something small like a lamp so you know when power is being
|
|
supplied to the outlets.
|
|
|
|
Now, you can either attempt to make an educated guess based on the
|
|
documentation your manufacturer has provided (if any), or just start
|
|
going down the list.
|
|
|
|
Step 1
|
|
|
|
Pick a driver to try from the list (genericups \-h) and go to step 2.
|
|
|
|
Step 2
|
|
|
|
Start the driver with the type you want to try \(hy
|
|
|
|
genericups \-x upstype=n /dev/port
|
|
|
|
Let upsd sync up (watch the syslog), and then run upsc to see what it
|
|
found. If the STATUS is right (should be OL for on line), go to step 3,
|
|
otherwise go back to step 1.
|
|
|
|
Alternatively, you can run genericups in debug mode \(hy
|
|
|
|
genericups -DDDDD \-x upstype=n /dev/port
|
|
|
|
In this mode it will be running in the foreground and continuously
|
|
display the line and battery status of the UPS.
|
|
|
|
Step 3
|
|
|
|
Disconnect the UPS from the wall/mains power. This is easiest if you
|
|
have a switched outlet in between it and the wall, but you can also just
|
|
pull the plug to test. The lamp should stay lit, and the status should
|
|
switch to "OB". If the lamp went out or the status didn't go to "OB"
|
|
within about 15 seconds, go to step 1. Otherwise, continue to step 4.
|
|
|
|
Step 4
|
|
|
|
At this point, we know that OL and OB work. If nothing else beyond
|
|
this point works, you at least know what your OL/OB value should be.
|
|
|
|
Wait for the UPS to start complaining about a low battery. Depending on
|
|
the size of your UPS battery and the lamp's bulb, this could take
|
|
awhile. It should start complaining audibly at some point. When this
|
|
happens, STATUS should show "OB LB" within 15 seconds. If not, go to
|
|
step 1, otherwise continue to step 5.
|
|
|
|
Step 5
|
|
|
|
So far: OL works, OB works, and LB works.
|
|
|
|
With the UPS running on battery, run the genericups driver with the \-k
|
|
switch to shut it down.
|
|
|
|
genericups \-x upstype=n \-k /dev/port
|
|
|
|
If the UPS turns off the lamp, you're done. At this point, you have
|
|
verified that the shutdown sequence actually does what you want. You
|
|
can start using the genericups driver with this type number for normal
|
|
operations.
|
|
|
|
You should use your findings to add a section to your ups.conf.
|
|
Here is a quick example:
|
|
|
|
[myups]
|
|
driver = genericups
|
|
port = /dev/ttyS0
|
|
upstype = 1
|
|
|
|
Change the port and upstype values to match your system.
|
|
|
|
.SH NEW SUPPORT
|
|
|
|
If the above testing sequence fails, you will probably need to create a
|
|
new entry to support your hardware. All UPS types are determined from the
|
|
table in the genericups.h file in the source tree.
|
|
|
|
On a standard 9 pin serial port, there are 6 lines that are used as the
|
|
standard "high/low" signal levels. 4 of them are incoming (to the PC,
|
|
from the UPS), and the other 2 are outgoing (to the UPS, from the PC).
|
|
The other 3 are the receive/transmit lines and the ground.
|
|
|
|
Be aware that many manufacturers remap pins within the cable. If you have
|
|
any doubts, a quick check with a multimeter should confirm whether the
|
|
cable is straight\(hythrough or not. Another thing to keep in mind is that
|
|
some cables have electronics in them to do special things. Some have
|
|
resistors and transistors on board to change behavior depending on what's
|
|
being supplied by the PC.
|
|
|
|
.SH SPECIFIC MODEL NOTES
|
|
|
|
These have been contributed by users of this driver.
|
|
|
|
The Centralion CL series may power down the load if the driver starts up
|
|
with the UPS running on battery as the default line settings contain the
|
|
shutdown sequence. \(hy Neil Muller
|
|
|
|
The Tripp\(hyLite Internet Office 700 must be used with the black 73\(hy0844
|
|
cable instead of the gray 73\(hy0743 cable. This entry should work with any
|
|
of their models with the Lan 2.2 interface \(hy see the sticker by the DB9
|
|
connector on the UPS. \(hy Stephen Brown
|
|
|
|
Type 5 should work with the Tripp\(hyLite Lan 2.1 interface and the 73\(hy0724
|
|
cable. This was tested with the OmniSmart 675 PNP on Red Hat 7.2. \(hy Q
|
|
Giese
|
|
|
|
Types 7 and 10 should both work with the PhoenixTec A1000.
|
|
|
|
.SH BUGS
|
|
|
|
There is no way to reliably detect a contact\(hyclosure UPS. This means the
|
|
driver will start up happily even if no UPS is detected. It also means
|
|
that if the connection between the UPS and computer is interrupted, you
|
|
may not be able to sense this in software.
|
|
|
|
Most contact\(hyclosure UPSes will not power down the load if the line power
|
|
is present. This can create a race when using slave \fBupsmon\fR(8)
|
|
systems. See the \fBupsmon\fR(8) man page for more information.
|
|
|
|
The solution to both of these problems is to upgrade to a smart protocol
|
|
UPS of some kind that allows detection and proper load cycling on command.
|
|
|
|
.SH SEE ALSO
|
|
|
|
.SS The core driver:
|
|
\fBnutupsdrv\fR(8)
|
|
|
|
.SS Internet resources:
|
|
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
|