225 lines
5.8 KiB
Text
225 lines
5.8 KiB
Text
Desc: Driver/server socket protocol
|
|
File: sock-protocol.txt
|
|
Date: 1 May 2003
|
|
Auth: Russell Kroll <rkroll@exploits.org>
|
|
|
|
Here's a brief explanation of the text-based protocol which is now used
|
|
between the drivers and server.
|
|
|
|
The drivers may send things on the socket at any time. They will send
|
|
out changes to their local storage immediately, without any sort of
|
|
prompting from the server. As a result, the server must always check on
|
|
any driver sockets for activity.
|
|
|
|
Formatting
|
|
==========
|
|
|
|
All parsing on either side of the socket is done by parseconf, so the
|
|
same rules about escaping characters and "quoting multi-word elements"
|
|
apply here. Values which may contain odd characters are typically
|
|
sent through pconf_encode to apply \ characters where necessary.
|
|
|
|
The "" construct is used throughout to force a multi-word value to stay
|
|
together on its way to the other end.
|
|
|
|
Commands used by the drivers
|
|
============================
|
|
|
|
SETINFO
|
|
-------
|
|
|
|
SETINFO <varname> "<value>"
|
|
|
|
SETINFO ups.status "OB LB"
|
|
|
|
There is no "ADDINFO" - if a given variable does not exist, it is
|
|
created upon receiving the first SETINFO command.
|
|
|
|
DELINFO
|
|
-------
|
|
|
|
DELINFO <varname>
|
|
|
|
DELINFO ups.temperature
|
|
|
|
ADDENUM
|
|
-------
|
|
|
|
ADDENUM <varname> "<value>"
|
|
|
|
ADDENUM input.transfer.low "95"
|
|
|
|
DELENUM
|
|
-------
|
|
|
|
DELENUM <varname> "<value>"
|
|
|
|
DELENUM input.transfer.low "98"
|
|
|
|
SETAUX
|
|
------
|
|
|
|
SETAUX <varname> <numeric value>
|
|
|
|
SETAUX ups.id 8
|
|
|
|
This overrides any previous value. The auxiliary value is presently
|
|
used as a length byte for read-write variables that are strings.
|
|
|
|
SETFLAGS
|
|
--------
|
|
|
|
SETFLAGS <varname> <flag>...
|
|
|
|
SETFLAGS ups.id RW STRING
|
|
|
|
Note that this command takes a variable number of arguments, as multiple
|
|
flags are supported. Also note that they are not crammed together in
|
|
"", since "RW STRING" would mean something completely different.
|
|
|
|
This also replaces any previous flags for a given variable.
|
|
|
|
ADDCMD
|
|
------
|
|
|
|
ADDCMD <cmdname>
|
|
|
|
ADDCMD load.off
|
|
|
|
DELCMD
|
|
------
|
|
|
|
DELCMD <cmdname>
|
|
|
|
DELCMD load.on
|
|
|
|
DUMPDONE
|
|
--------
|
|
|
|
DUMPDONE
|
|
|
|
This is only used to tell the server that every possible item has been
|
|
transmitted in response to its DUMPALL request. Once this has been
|
|
received by the server, it can be sure that it knows everything that the
|
|
driver does.
|
|
|
|
PONG
|
|
----
|
|
|
|
PONG
|
|
|
|
This is sent in response to a PING from the server. It is only used as
|
|
a sanity check to make sure that the driver has not gotten stuck
|
|
somewhere.
|
|
|
|
DATAOK
|
|
------
|
|
|
|
DATAOK
|
|
|
|
This means that the driver is able to communicate with the UPS, and the
|
|
data should be treated as usable. It is always sent at the end of the
|
|
dump if the data is not stale. It may also be sent at other times.
|
|
|
|
DATASTALE
|
|
---------
|
|
|
|
DATASTALE
|
|
|
|
This is sent by the driver to inform any listeners that the data is no
|
|
longer usable. This usually means that the driver is unable to get any
|
|
sort of meaningful response from the UPS. You must not rely on any
|
|
status information once this has been sent.
|
|
|
|
This will be sent in the beginning of a dump if the data is stale, and
|
|
may be repeated. It is cleared by DATAOK.
|
|
|
|
Commands sent by the server
|
|
===========================
|
|
|
|
PING
|
|
----
|
|
|
|
PING
|
|
|
|
This is sent to check on the health of a driver. The server should only
|
|
send this when it hasn't heard anything valid from a driver recently.
|
|
Some drivers have very little to say in terms of updates, and this may
|
|
be the only communications they have with the server on a normal basis.
|
|
|
|
If a driver does not respond with the PONG within a few seconds at the
|
|
most, it should be treated as dead/unavailable. Data stored in the
|
|
server must not be passed on to the clients when this happens.
|
|
|
|
INSTCMD
|
|
-------
|
|
|
|
INSTCMD <cmdname>
|
|
|
|
INSTCMD panel.test.start
|
|
|
|
SET
|
|
---
|
|
|
|
SET <varname> "<value>"
|
|
|
|
SET ups.id "Data room"
|
|
|
|
DUMPALL
|
|
-------
|
|
|
|
DUMPALL
|
|
|
|
The server uses this to request a complete copy of everything the driver
|
|
knows. This is returned in the form of the same commands (SETINFO,
|
|
etc.) that would be used if they were being updated normally. As a
|
|
result, the same parsing happens either way.
|
|
|
|
The server can tell when it has a full copy of the data by waiting for
|
|
DUMPDONE. That special response from the driver is sent once the entire
|
|
set has been transmitted.
|
|
|
|
Design notes
|
|
============
|
|
|
|
Requests
|
|
--------
|
|
|
|
There is no way to request just one variable. This was done on purpose
|
|
to limit the complexity of the drivers. Their job is to send out
|
|
updates and handle a few simple requests. DUMPALL is provided to give
|
|
the server a known foundation.
|
|
|
|
To track a limited set of variables, a server just needs to do DUMPALL,
|
|
then only have handlers that remember values for the variables that
|
|
matter. Anything else should be ignored.
|
|
|
|
Access/Security
|
|
---------------
|
|
|
|
There are no access controls in the drivers. Anything that can connect
|
|
to their sockets can make requests, including SET and INSTCMD if
|
|
supported by the driver and hardware. These sockets must be kept
|
|
secure. If your operating system does not honor permissions or modes on
|
|
sockets, then you must store them in a directory with suitable
|
|
permissions to limit access.
|
|
|
|
Command limitations
|
|
-------------------
|
|
|
|
As parseconf is used to handle decoding and chunking of the data, there
|
|
are some limits on what may be used. These default to 32 arguments of
|
|
512 characters each, which should be more than enough for everything
|
|
which is currently needed by the software.
|
|
|
|
These limits are strictly for sanity purposes, and may be raised if
|
|
necessary. parseconf itself can handle vast numbers of arguments and
|
|
characters, with some speed penalty as things get really big.
|
|
|
|
Re-establishing communications
|
|
------------------------------
|
|
|
|
If the server loses its connection to the driver and later reconnects,
|
|
it must flush any local storage and start again with DUMPALL. The
|
|
driver may have changed the internal state considerably during that
|
|
time, and anything other approach could leave old elements behind.
|