179 lines
4.5 KiB
Text
179 lines
4.5 KiB
Text
NUT-SCANNER(8)
|
|
==============
|
|
|
|
|
|
NAME
|
|
----
|
|
nut-scanner - scan communication buses for NUT devices
|
|
|
|
SYNOPSIS
|
|
--------
|
|
*nut-scanner* -h
|
|
|
|
*nut-scanner* ['OPTIONS']
|
|
|
|
DESCRIPTION
|
|
-----------
|
|
|
|
*nut-scanner* scans available communication buses and displays any
|
|
NUT-compatible devices it has found.
|
|
|
|
INSTALLATION
|
|
------------
|
|
|
|
*nut-scanner* is only built if libltdl (part of libtool development suite)
|
|
is available. Available options (USB, SNMP, IPMI, ...) will vary according
|
|
to the available compile time and runtime dependencies. For example, if
|
|
Net-SNMP is installed, thus providing libsnmp (.so or .dll) and headers,
|
|
both during compilation and runtime, then SNMP discovery will be available.
|
|
|
|
OPTIONS
|
|
-------
|
|
*-h*::
|
|
Display the help text.
|
|
|
|
DISPLAY OPTIONS
|
|
---------------
|
|
|
|
*-N* | *--disp_nut_conf*::
|
|
|
|
Display result in the 'ups.conf' format.
|
|
|
|
*-P* | *--disp_parsable*::
|
|
|
|
Display result in a parsable format.
|
|
|
|
BUS OPTIONS
|
|
-----------
|
|
|
|
*-C* | *--complete_scan*::
|
|
|
|
Scan all available communication buses (default behavior)
|
|
|
|
*-U* | *--usb_scan*::
|
|
|
|
List all NUT-compatible USB devices currently plugged in.
|
|
|
|
*-S* | *--snmp_scan*::
|
|
|
|
Scan SNMP devices. Requires at least a 'start IP', and optionally, an 'end IP'. See specific SNMP OPTIONS for community and security settings.
|
|
|
|
*-M* | *--xml_scan*::
|
|
|
|
Scan XML/HTTP devices. Broadcast a network message on the current network interfaces to retrieve XML/HTTP capable devices. No IP required.
|
|
|
|
*-O* | *--oldnut_scan*::
|
|
|
|
Scan NUT devices (i.e. upsd daemon) on IP ranging from 'start IP' to 'end IP'.
|
|
|
|
*-A* | *--avahi_scan*::
|
|
|
|
Scan NUT servers using Avahi request on the current network interfaces. No IP required.
|
|
|
|
*-I* | *--ipmi_scan*::
|
|
|
|
Scan NUT compatible devices available via IPMI on the current host.
|
|
|
|
NETWORK OPTIONS
|
|
---------------
|
|
|
|
*-t* | *--timeout* 'timeout'::
|
|
|
|
Set the network timeout in seconds. Default timeout is 5 seconds.
|
|
|
|
*-s* | *--start_ip* 'start IP'::
|
|
|
|
Set the first IP (IPv4 or IPv6) when a range of IP is required (SNMP, old_nut).
|
|
|
|
*-e* | *--end_ip* 'end IP'::
|
|
|
|
Set the last IP (IPv4 or IPv6) when a range of IP is required (SNMP, old_nut). If this parameter is omitted, only the 'start IP' is scanned. If 'end IP' is less than 'start IP', both parameters are internally permuted.
|
|
|
|
*-m* | *--mask_cidr* 'IP address/mask'::
|
|
|
|
Set a range of IP using CIDR notation.
|
|
|
|
NUT DEVICE OPTION
|
|
-----------------
|
|
|
|
*-p* | *--port* 'port number'::
|
|
|
|
Set the port number of scanned NUT devices (default 3493).
|
|
|
|
SNMP V1 OPTION
|
|
--------------
|
|
|
|
*-c* | *--community* 'community'::
|
|
|
|
Set SNMP v1 community name (default = public).
|
|
|
|
SNMP V3 OPTIONS
|
|
---------------
|
|
|
|
*-l* | *--secLevel* 'security level'::
|
|
|
|
Set the 'security level' used for SNMPv3 messages. Allowed values are: noAuthNoPriv, authNoPriv and authPriv.
|
|
|
|
*-u* | *--secName* 'security name'::
|
|
|
|
Set the 'security name' used for authenticated SNMPv3 messages. This parameter is mandatory if you set 'security level'.
|
|
|
|
*-w* | *--authProtocol* 'authentication protocol'::
|
|
|
|
Set the 'authentication protocol' used for authenticated SNMPv3 messages. Allowed values are MD5 or SHA. Default value is MD5.
|
|
|
|
*-W* | *--authPassword* 'authentication pass phrase'::
|
|
|
|
Set the 'authentication pass phrase' used for authenticated SNMPv3 messages. This parameter is mandatory if you set 'security level' to authNoPriv or authPriv.
|
|
|
|
*-x* | *--privProtocol* 'privacy protocol'::
|
|
|
|
Set the 'privacy protocol' used for encrypted SNMPv3 messages. Allowed values are DES or AES. Default value is DES.
|
|
|
|
*-X* | *--privPassword* 'privacy pass phrase'::
|
|
|
|
Set the 'privacy pass phrase' used for encrypted SNMPv3 messages. This parameter is mandatory if you set 'security level' to authPriv.
|
|
|
|
MISCELLANEOUS OPTIONS
|
|
---------------------
|
|
|
|
*-V* | *--version*::
|
|
|
|
Display NUT version.
|
|
|
|
*-a* | *--available*::
|
|
|
|
Display available bus that can be scanned , depending on how the binary has been compiled. (OLDNUT, USB, SNMP, XML, AVAHI, IPMI).
|
|
|
|
*-q* | *--quiet*::
|
|
|
|
Display only scan result. No information on currently scanned bus is displayed.
|
|
|
|
EXAMPLES
|
|
--------
|
|
|
|
To scan USB devices only:
|
|
|
|
*nut-scanner -U*
|
|
|
|
To scan SNMP v1 device with public community on address range 192.168.0.0 to 192.168.0.255:
|
|
|
|
*nut-scanner -S -s 192.168.0.0 -e 192.168.0.255*
|
|
|
|
The same using CIDR notation:
|
|
|
|
*nut-scanner -S -m 192.168.0.0/24*
|
|
|
|
To scan NUT servers with a timeout of 10 seconds on IP range 192.168.0.0 to 192.168.0.128 using CIDR notation:
|
|
|
|
*nut-scanner -O -t 10 -m 192.168.0.0/25*
|
|
|
|
SEE ALSO
|
|
--------
|
|
|
|
linkman:ups.conf[5]
|
|
|
|
INTERNET RESOURCES
|
|
------------------
|
|
|
|
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
|