2500 lines
100 KiB
C
2500 lines
100 KiB
C
/*
|
|
bcmxcp.c - driver for powerware UPS
|
|
|
|
Total rewrite of bcmxcp.c (nut ver-1.4.3)
|
|
* Copyright (c) 2002, Martin Schroeder *
|
|
* emes -at- geomer.de *
|
|
* All rights reserved.*
|
|
|
|
Copyright (C)
|
|
2004 Kjell Claesson <kjell.claesson-at-epost.tidanet.se>
|
|
2004 Tore Ørpetveit <tore-at-orpetveit.net>
|
|
2011 - 2015 Arnaud Quette <ArnaudQuette@Eaton.com>
|
|
|
|
Thanks to Tore Ørpetveit <tore-at-orpetveit.net> that sent me the
|
|
manuals for bcm/xcp.
|
|
|
|
And to Fabio Di Niro <fabio.diniro@email.it> and his metasys module.
|
|
It influenced the layout of this driver.
|
|
|
|
Modified for USB by Wolfgang Ocker <weo@weo1.de>
|
|
|
|
ojw0000 2007Apr5 Oliver Wilcock - modified to control individual load segments (outlet.2.shutdown.return) on Powerware PW5125.
|
|
|
|
Modified to support setvar for outlet.n.delay.start by Rich Wrenn (RFW) 9-3-11.
|
|
Modified to support setvar for outlet.n.delay.shutdown by Arnaud Quette, 9-12-11
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
|
|
TODO List:
|
|
|
|
Extend the parsing of the Standard ID Block, to read:
|
|
|
|
Config Block Length: (High priority)
|
|
Give information if config block is
|
|
present, and how long it is, if it exist.
|
|
If config block exist, read the config block and parse the
|
|
'Length of the Extended Limits Configuration Block' for
|
|
extended configuration commands
|
|
|
|
Statistic map Size: (Low priority)
|
|
May be used to se if there is a Statistic Map.
|
|
It holds data on the utility power quality for
|
|
the past month and since last reset. Number of
|
|
times on battery and how long. Up time and utility
|
|
frequency deviation. (Only larger ups'es)
|
|
|
|
Size of Alarm History Log: (Low priority)
|
|
See if it have any alarm history block and enable
|
|
command to dump it.
|
|
|
|
Maximum Supported Command Length: ( Med. to High priority)
|
|
Give info about the ups receive buffer size.
|
|
|
|
Size of Alarm Block: ( Med. to High priority)
|
|
Make a smarter handling of the Active alarm's if we know the length
|
|
of the Active Alarm Block. Don't need the long loop to parse the
|
|
alarm's. Maybe use another way to set up the alarm struct in the
|
|
'init_alarm_map'.
|
|
|
|
Parse 'Communication Capabilities Block' ( Low priority)
|
|
Get info of the connected ports ID, number of baud rates,
|
|
command and respnse length.
|
|
|
|
Parse 'Communication Port List Block': ( Low priority)
|
|
This block gives info about the communication ports. Some ups'es
|
|
have multiple comport's, and use one port for eatch load segment.
|
|
In this block it is possible to get:
|
|
Number of ports. (In this List)
|
|
This Comport id (Which Comm Port is reporting this block.)
|
|
Comport id (Id for eatch port listed. The first comport ID=1)
|
|
Baudrate of the listed port.
|
|
Serial config.
|
|
Port usage:
|
|
What this Comm Port is being used for:
|
|
0 = Unknown usage, No communication occurring.
|
|
1 = Undefined / Unknown communication occurring
|
|
2 = Waiting to communicate with a UPS
|
|
3 = Communication established with a UPS
|
|
4 = Waiting to communicate with software or adapter
|
|
5 = Communication established software (e.g., LanSafe)
|
|
or adapter (e.g., ConnectUPS)
|
|
6 = Communicating with a Display Device
|
|
7 = Multi-drop Serial channel
|
|
8 = Communicating with an Outlet Controller
|
|
Number of outlets. (Number of Outlets "assigned to" (controlled by) this Comm Port)
|
|
Outlet number. (Each assigned Outlet is listed (1-64))
|
|
|
|
'Set outlet parameter command (0x97)' to alter the delay
|
|
settings or turn the outlet on or off with a delay (0 - 32767 seconds)
|
|
|
|
|
|
Rewrite some parts of the driver, to minimise code duplication. (Like the instant commands)
|
|
|
|
Implement support for Password Authorization (XCP spec, §4.3.2)
|
|
|
|
Complete support for settable variables (upsh.setvar)
|
|
*/
|
|
|
|
|
|
#include "main.h"
|
|
#include <math.h> /* For ldexp() */
|
|
#include <float.h> /*for FLT_MAX */
|
|
#include "nut_stdint.h" /* for uint8_t, uint16_t, uint32_t, ... */
|
|
#include "bcmxcp_io.h"
|
|
#include "bcmxcp.h"
|
|
|
|
#define DRIVER_NAME "BCMXCP UPS driver"
|
|
#define DRIVER_VERSION "0.31"
|
|
|
|
#define MAX_NUT_NAME_LENGTH 128
|
|
#define NUT_OUTLET_POSITION 7
|
|
|
|
/* driver description structure */
|
|
upsdrv_info_t upsdrv_info = {
|
|
DRIVER_NAME,
|
|
DRIVER_VERSION,
|
|
"Martin Schroeder <emes@geomer.de>\n" \
|
|
"Kjell Claesson <kjell.claesson@epost.tidanet.se>\n" \
|
|
"Tore Ørpetveit <tore@orpetveit.net>\n" \
|
|
"Arnaud Quette <ArnaudQuette@Eaton.com>\n" \
|
|
"Wolfgang Ocker <weo@weo1.de>\n" \
|
|
"Oliver Wilcock\n" \
|
|
"Prachi Gandhi <prachisgandhi@eaton.com>\n" \
|
|
"Alf Høgemark <alf@i100>\n" \
|
|
"Gavrilov Igor",
|
|
DRV_STABLE,
|
|
{ &comm_upsdrv_info, NULL }
|
|
};
|
|
|
|
static int get_word(const unsigned char*);
|
|
static long int get_long(const unsigned char*);
|
|
static float get_float(const unsigned char *data);
|
|
static void init_command_map(void);
|
|
static void init_meter_map(void);
|
|
static void init_alarm_map(void);
|
|
static bool_t init_command(int size);
|
|
static void init_config(void);
|
|
static void init_limit(void);
|
|
static void init_ext_vars(void);
|
|
static void init_topology(void);
|
|
static void init_ups_meter_map(const unsigned char *map, unsigned char len);
|
|
static void init_ups_alarm_map(const unsigned char *map, unsigned char len);
|
|
static bool_t set_alarm_support_in_alarm_map(const unsigned char *map, const int mapIndex, const int bitmask, const int alarmMapIndex, const int alarmBlockIndex);
|
|
static void decode_meter_map_entry(const unsigned char *entry, const unsigned char format, char* value);
|
|
static int init_outlet(unsigned char len);
|
|
static void init_system_test_capabilities(void);
|
|
static int instcmd(const char *cmdname, const char *extra);
|
|
static int setvar(const char *varname, const char *val);
|
|
static int decode_instcmd_exec(const int res, const unsigned char exec_status, const char *cmdname, const char *success_msg);
|
|
static int decode_setvar_exec(const int res, const unsigned char exec_status, const char *cmdname, const char *success_msg);
|
|
static float calculate_ups_load(const unsigned char *data);
|
|
|
|
static const char *nut_find_infoval(info_lkp_t *xcp2info, const double value, const bool_t debug_output_nonexisting);
|
|
|
|
const char *FreqTol[3] = {"+/-2%", "+/-5%", "+/-7"};
|
|
const char *ABMStatus[4] = {"charging", "discharging", "floating", "resting"};
|
|
const char *OutletStatus[9] = {"unknown","on/closed","off/open","on with pending","off with pending","unknown","unknown","failed and closed","failed and open"};
|
|
/* Standard Authorization Block */
|
|
unsigned char AUTHOR[4] = {0xCF, 0x69, 0xE8, 0xD5};
|
|
int nphases = 0;
|
|
int outlet_block_len = 0;
|
|
const char *cpu_name[5] = {"Cont:", "Inve:", "Rect:", "Netw:", "Disp:"};
|
|
const char *horn_stat[3] = {"disabled", "enabled", "muted"};
|
|
|
|
|
|
/* Battery test results */
|
|
info_lkp_t batt_test_info[] = {
|
|
{ 0, "No test initiated", NULL },
|
|
{ 1, "In progress", NULL },
|
|
{ 2, "Done and passed", NULL },
|
|
{ 3, "Aborted", NULL },
|
|
{ 4, "Done and error", NULL },
|
|
{ 5, "Test scheduled", NULL },
|
|
/* Not sure about the meaning of the below ones! */
|
|
{ 6, NULL, NULL }, /* The string was present but it has now been removed */
|
|
{ 7, NULL, NULL }, /* The string was not installed at the last power up */
|
|
{ 0, NULL, NULL }
|
|
};
|
|
|
|
/* Topology map results */
|
|
info_lkp_t topology_info[] = {
|
|
{ BCMXCP_TOPOLOGY_OFFLINE_SWITCHER_1P, "Off-line switcher, Single Phase", NULL },
|
|
{ BCMXCP_TOPOLOGY_LINEINT_UPS_1P, "Line-Interactive UPS, Single Phase", NULL },
|
|
{ BCMXCP_TOPOLOGY_LINEINT_UPS_2P, "Line-Interactive UPS, Two Phase", NULL },
|
|
{ BCMXCP_TOPOLOGY_LINEINT_UPS_3P, "Line-Interactive UPS, Three Phase", NULL },
|
|
{ BCMXCP_TOPOLOGY_DUAL_AC_ONLINE_UPS_1P, "Dual AC Input, On-Line UPS, Single Phase", NULL },
|
|
{ BCMXCP_TOPOLOGY_DUAL_AC_ONLINE_UPS_2P, "Dual AC Input, On-Line UPS, Two Phase", NULL },
|
|
{ BCMXCP_TOPOLOGY_DUAL_AC_ONLINE_UPS_3P, "Dual AC Input, On-Line UPS, Three Phase", NULL },
|
|
{ BCMXCP_TOPOLOGY_ONLINE_UPS_1P, "On-Line UPS, Single Phase", NULL },
|
|
{ BCMXCP_TOPOLOGY_ONLINE_UPS_2P, "On-Line UPS, Two Phase", NULL },
|
|
{ BCMXCP_TOPOLOGY_ONLINE_UPS_3P, "On-Line UPS, Three Phase", NULL },
|
|
{ BCMXCP_TOPOLOGY_PARA_REDUND_ONLINE_UPS_1P, "Parallel Redundant On-Line UPS, Single Phase", NULL },
|
|
{ BCMXCP_TOPOLOGY_PARA_REDUND_ONLINE_UPS_2P, "Parallel Redundant On-Line UPS, Two Phase", NULL },
|
|
{ BCMXCP_TOPOLOGY_PARA_REDUND_ONLINE_UPS_3P, "Parallel Redundant On-Line UPS, Three Phase", NULL },
|
|
{ BCMXCP_TOPOLOGY_PARA_CAPACITY_ONLINE_UPS_1P, "Parallel for Capacity On-Line UPS, Single Phase", NULL },
|
|
{ BCMXCP_TOPOLOGY_PARA_CAPACITY_ONLINE_UPS_2P, "Parallel for Capacity On-Line UPS, Two Phase", NULL },
|
|
{ BCMXCP_TOPOLOGY_PARA_CAPACITY_ONLINE_UPS_3P, "Parallel for Capacity On-Line UPS, Three Phase", NULL },
|
|
{ BCMXCP_TOPOLOGY_SYSTEM_BYPASS_MODULE_3P, "System Bypass Module, Three Phase", NULL },
|
|
{ BCMXCP_TOPOLOGY_HOT_TIE_CABINET_3P, "Hot-Tie Cabinet, Three Phase", NULL },
|
|
{ BCMXCP_TOPOLOGY_OUTLET_CONTROLLER_1P, "Outlet Controller, Single Phase", NULL },
|
|
{ BCMXCP_TOPOLOGY_DUAL_AC_STATIC_SWITCH_3P, "Dual AC Input Static Switch Module, 3 Phase", NULL },
|
|
{ 0, NULL, NULL }
|
|
};
|
|
|
|
/* Command map results */
|
|
info_lkp_t command_map_info[] = {
|
|
{ PW_INIT_BAT_TEST, "test.battery.start", NULL },
|
|
{ PW_LOAD_OFF_RESTART, "shutdown.return", NULL },
|
|
{ PW_UPS_OFF, "shutdown.stayoff", NULL },
|
|
{ PW_UPS_ON, "load.on", NULL},
|
|
{ PW_GO_TO_BYPASS, "bypass.start", NULL},
|
|
{ 0, NULL, NULL }
|
|
};
|
|
|
|
/* System test capabilities results */
|
|
info_lkp_t system_test_info[] = {
|
|
{ PW_SYS_TEST_GENERAL, "test.system.start", NULL },
|
|
/* { PW_SYS_TEST_SCHEDULE_BATTERY_COMMISSION, "test.battery.start.delayed", NULL }, */
|
|
/* { PW_SYS_TEST_ALTERNATE_AC_INPUT, "test.alternate_acinput.start", NULL }, */
|
|
{ PW_SYS_TEST_FLASH_LIGHTS, "test.panel.start", NULL },
|
|
{ 0, NULL, NULL }
|
|
};
|
|
|
|
/* allocate storage for shared variables (extern in bcmxcp.h) */
|
|
BCMXCP_COMMAND_MAP_ENTRY_t
|
|
bcmxcp_command_map[BCMXCP_COMMAND_MAP_MAX];
|
|
BCMXCP_METER_MAP_ENTRY_t
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_MAX];
|
|
BCMXCP_ALARM_MAP_ENTRY_t
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_MAP_MAX];
|
|
BCMXCP_STATUS_t
|
|
bcmxcp_status;
|
|
|
|
|
|
/* get_word function from nut driver metasys.c */
|
|
int get_word(const unsigned char *buffer) /* return an integer reading a word in the supplied buffer */
|
|
{
|
|
unsigned char a, b;
|
|
int result;
|
|
|
|
a = buffer[0];
|
|
b = buffer[1];
|
|
result = b*256 + a;
|
|
|
|
return result;
|
|
}
|
|
|
|
/* get_long function from nut driver metasys.c for meter readings*/
|
|
long int get_long(const unsigned char *buffer) /* return a long integer reading 4 bytes in the supplied buffer.*/
|
|
{
|
|
unsigned char a, b, c, d;
|
|
long int result;
|
|
|
|
a = buffer[0];
|
|
b = buffer[1];
|
|
c = buffer[2];
|
|
d = buffer[3];
|
|
result = (256*256*256*d) + (256*256*c) + (256*b) + a;
|
|
|
|
return result;
|
|
}
|
|
|
|
/* get_float funktion for convering IEEE-754 to float */
|
|
float get_float(const unsigned char *data)
|
|
{
|
|
int s, e;
|
|
unsigned long src;
|
|
long f;
|
|
|
|
src = ((unsigned long)data[3] << 24) |
|
|
((unsigned long)data[2] << 16) |
|
|
((unsigned long)data[1] << 8) |
|
|
((unsigned long)data[0]);
|
|
|
|
s = (src & 0x80000000UL) >> 31;
|
|
e = (src & 0x7F800000UL) >> 23;
|
|
f = (src & 0x007FFFFFUL);
|
|
|
|
if (e == 255 && f != 0)
|
|
{
|
|
/* NaN (Not a Number) */
|
|
return FLT_MAX;
|
|
}
|
|
|
|
if (e == 255 && f == 0 && s == 1)
|
|
{
|
|
/* Negative infinity */
|
|
return -FLT_MAX;
|
|
}
|
|
|
|
if (e == 255 && f == 0 && s == 0)
|
|
{
|
|
/* Positive infinity */
|
|
return FLT_MAX;
|
|
}
|
|
|
|
if (e > 0 && e < 255)
|
|
{
|
|
/* Normal number */
|
|
f += 0x00800000UL;
|
|
if (s) f = -f;
|
|
return ldexp(f, e - 150);
|
|
}
|
|
|
|
if (e == 0 && f != 0)
|
|
{
|
|
/* Denormal number */
|
|
if (s) f = -f;
|
|
return ldexp(f, -149);
|
|
}
|
|
|
|
if (e == 0 && f == 0 && (s == 1 || s == 0))
|
|
{
|
|
/* Zero */
|
|
return 0;
|
|
}
|
|
|
|
/* Never happens */
|
|
upslogx(LOG_ERR, "s = %d, e = %d, f = %lu\n", s, e, f);
|
|
return 0;
|
|
}
|
|
|
|
/* lightweight function to calculate the 8-bit
|
|
* two's complement checksum of buf, using XCP data length (including header)
|
|
* the result must be 0 for the sequence data to be valid */
|
|
int checksum_test(const unsigned char *buf)
|
|
{
|
|
unsigned char checksum = 0;
|
|
int i, length;
|
|
|
|
/* buf[2] is the length of the XCP frame ; add 5 for the header */
|
|
length = (int)(buf[2]) + 5;
|
|
|
|
for (i = 0; i < length; i++) {
|
|
checksum += buf[i];
|
|
}
|
|
/* Compute the 8-bit, Two's Complement checksum now and return it */
|
|
checksum = ((0x100 - checksum) & 0xFF);
|
|
return (checksum == 0);
|
|
}
|
|
|
|
unsigned char calc_checksum(const unsigned char *buf)
|
|
{
|
|
unsigned char c;
|
|
int i;
|
|
|
|
c = 0;
|
|
for(i = 0; i < 2 + buf[1]; i++)
|
|
c -= buf[i];
|
|
|
|
return c;
|
|
}
|
|
|
|
void init_command_map()
|
|
{
|
|
int i = 0;
|
|
|
|
/* Clean entire map */
|
|
memset(&bcmxcp_command_map, 0, sizeof(BCMXCP_COMMAND_MAP_ENTRY_t) * BCMXCP_COMMAND_MAP_MAX);
|
|
|
|
/* Set all command descriptions */
|
|
bcmxcp_command_map[PW_ID_BLOCK_REQ].command_desc = "PW_ID_BLOCK_REQ";
|
|
bcmxcp_command_map[PW_EVENT_HISTORY_LOG_REQ].command_desc = "PW_EVENT_HISTORY_LOG_REQ";
|
|
bcmxcp_command_map[PW_STATUS_REQ].command_desc = "PW_STATUS_REQ";
|
|
bcmxcp_command_map[PW_METER_BLOCK_REQ].command_desc = "PW_METER_BLOCK_REQ";
|
|
bcmxcp_command_map[PW_CUR_ALARM_REQ].command_desc = "PW_CUR_ALARM_REQ";
|
|
bcmxcp_command_map[PW_CONFIG_BLOCK_REQ].command_desc = "PW_CONFIG_BLOCK_REQ";
|
|
bcmxcp_command_map[PW_UTILITY_STATISTICS_BLOCK_REQ].command_desc = "PW_UTILITY_STATISTICS_BLOCK_REQ";
|
|
bcmxcp_command_map[PW_WAVEFORM_BLOCK_REQ].command_desc = "PW_WAVEFORM_BLOCK_REQ";
|
|
bcmxcp_command_map[PW_BATTERY_REQ].command_desc = "PW_BATTERY_REQ";
|
|
bcmxcp_command_map[PW_LIMIT_BLOCK_REQ].command_desc = "PW_LIMIT_BLOCK_REQ";
|
|
bcmxcp_command_map[PW_TEST_RESULT_REQ].command_desc = "PW_TEST_RESULT_REQ";
|
|
bcmxcp_command_map[PW_COMMAND_LIST_REQ].command_desc = "PW_COMMAND_LIST_REQ";
|
|
bcmxcp_command_map[PW_OUT_MON_BLOCK_REQ].command_desc = "PW_OUT_MON_BLOCK_REQ";
|
|
bcmxcp_command_map[PW_COM_CAP_REQ].command_desc = "PW_COM_CAP_REQ";
|
|
bcmxcp_command_map[PW_UPS_TOP_DATA_REQ].command_desc = "PW_UPS_TOP_DATA_REQ";
|
|
bcmxcp_command_map[PW_COM_PORT_LIST_BLOCK_REQ].command_desc = "PW_COM_PORT_LIST_BLOCK_REQ";
|
|
bcmxcp_command_map[PW_REQUEST_SCRATCHPAD_DATA_REQ].command_desc = "PW_REQUEST_SCRATCHPAD_DATA_REQ";
|
|
bcmxcp_command_map[PW_GO_TO_BYPASS].command_desc = "PW_GO_TO_BYPASS";
|
|
bcmxcp_command_map[PW_UPS_ON].command_desc = "PW_UPS_ON";
|
|
bcmxcp_command_map[PW_LOAD_OFF_RESTART].command_desc = "PW_LOAD_OFF_RESTART";
|
|
bcmxcp_command_map[PW_UPS_OFF].command_desc = "PW_UPS_OFF";
|
|
bcmxcp_command_map[PW_DECREMENT_OUTPUT_VOLTAGE].command_desc = "PW_DECREMENT_OUTPUT_VOLTAGE";
|
|
bcmxcp_command_map[PW_INCREMENT_OUTPUT_VOLTAGE].command_desc = "PW_INCREMENT_OUTPUT_VOLTAGE";
|
|
bcmxcp_command_map[PW_SET_TIME_AND_DATE].command_desc = "PW_SET_TIME_AND_DATE";
|
|
bcmxcp_command_map[PW_UPS_ON_TIME].command_desc = "PW_UPS_ON_TIME";
|
|
bcmxcp_command_map[PW_UPS_ON_AT_TIME].command_desc = "PW_UPS_ON_AT_TIME";
|
|
bcmxcp_command_map[PW_UPS_OFF_TIME].command_desc = "PW_UPS_OFF_TIME";
|
|
bcmxcp_command_map[PW_UPS_OFF_AT_TIME].command_desc = "PW_UPS_OFF_AT_TIME";
|
|
bcmxcp_command_map[PW_SET_CONF_COMMAND].command_desc = "PW_SET_CONF_COMMAND";
|
|
bcmxcp_command_map[PW_SET_OUTLET_COMMAND].command_desc = "PW_SET_OUTLET_COMMAND";
|
|
bcmxcp_command_map[PW_SET_COM_COMMAND].command_desc = "PW_SET_COM_COMMAND";
|
|
bcmxcp_command_map[PW_SET_SCRATHPAD_SECTOR].command_desc = "PW_SET_SCRATHPAD_SECTOR";
|
|
bcmxcp_command_map[PW_SET_POWER_STRATEGY].command_desc = "PW_SET_POWER_STRATEGY";
|
|
bcmxcp_command_map[PW_SET_REQ_ONLY_MODE].command_desc = "PW_SET_REQ_ONLY_MODE";
|
|
bcmxcp_command_map[PW_SET_UNREQUESTED_MODE].command_desc = "PW_SET_UNREQUESTED_MODE";
|
|
bcmxcp_command_map[PW_INIT_BAT_TEST].command_desc = "PW_INIT_BAT_TEST";
|
|
bcmxcp_command_map[PW_INIT_SYS_TEST].command_desc = "PW_INIT_SYS_TEST";
|
|
bcmxcp_command_map[PW_SELECT_SUBMODULE].command_desc = "PW_SELECT_SUBMODULE";
|
|
bcmxcp_command_map[PW_AUTHORIZATION_CODE].command_desc = "PW_AUTHORIZATION_CODE";
|
|
|
|
for(i = 0; i < BCMXCP_COMMAND_MAP_MAX; i++) {
|
|
bcmxcp_command_map[i].command_byte = 0;
|
|
}
|
|
}
|
|
|
|
void init_meter_map()
|
|
{
|
|
/* Clean entire map */
|
|
memset(&bcmxcp_meter_map, 0, sizeof(BCMXCP_METER_MAP_ENTRY_t) * BCMXCP_METER_MAP_MAX);
|
|
|
|
/* Set all corresponding mappings NUT <-> BCM/XCP */
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_OUTPUT_VOLTS_AB].nut_entity = "output.L1-L2.voltage";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_OUTPUT_VOLTS_BC].nut_entity = "output.L2-L3.voltage";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_OUTPUT_VOLTS_CA].nut_entity = "output.L3-L1.voltage";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_INPUT_VOLTS_AB].nut_entity = "input.L1-L2.voltage";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_INPUT_VOLTS_BC].nut_entity = "input.L2-L3.voltage";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_INPUT_VOLTS_CA].nut_entity = "input.L3-L1.voltage";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_INPUT_CURRENT_PHASE_B].nut_entity = "input.L2.current";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_INPUT_CURRENT_PHASE_C].nut_entity = "input.L3.current";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_INPUT_WATTS].nut_entity = "input.realpower";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_OUTPUT_VA].nut_entity = "ups.power";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_INPUT_VA].nut_entity = "input.power";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_OUTPUT_POWER_FACTOR].nut_entity = "output.powerfactor";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_INPUT_POWER_FACTOR].nut_entity = "input.powerfactor";
|
|
|
|
if (nphases == 1) {
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_INPUT_CURRENT_PHASE_A].nut_entity = "input.current";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_PERCENT_LOAD_PHASE_A].nut_entity = "ups.load"; /* TODO: Decide on corresponding three-phase variable mapping. */
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_BYPASS_VOLTS_PHASE_A].nut_entity = "input.bypass.voltage";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_INPUT_VOLTS_PHASE_A].nut_entity = "input.voltage";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_LOAD_CURRENT_PHASE_A].nut_entity = "output.current";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_LOAD_CURRENT_PHASE_A_BAR_CHART].nut_entity = "output.current.nominal";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_OUTPUT_VOLTS_A].nut_entity = "output.voltage";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_OUTPUT_WATTS].nut_entity = "ups.realpower";
|
|
} else {
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_INPUT_CURRENT_PHASE_A].nut_entity = "input.L1.current";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_PERCENT_LOAD_PHASE_A].nut_entity = "output.L1.power.percent";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_PERCENT_LOAD_PHASE_B].nut_entity = "output.L2.power.percent";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_PERCENT_LOAD_PHASE_C].nut_entity = "output.L3.power.percent";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_OUTPUT_VA_PHASE_A].nut_entity = "output.L1.power";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_OUTPUT_VA_PHASE_B].nut_entity = "output.L2.power";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_OUTPUT_VA_PHASE_C].nut_entity = "output.L3.power";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_BYPASS_VOLTS_PHASE_A].nut_entity = "input.bypass.L1-N.voltage";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_BYPASS_VOLTS_PHASE_B].nut_entity = "input.bypass.L2-N.voltage";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_BYPASS_VOLTS_PHASE_C].nut_entity = "input.bypass.L3-N.voltage";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_INPUT_VOLTS_PHASE_A].nut_entity = "input.L1-N.voltage";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_LOAD_CURRENT_PHASE_A].nut_entity = "output.L1.current";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_LOAD_CURRENT_PHASE_A_BAR_CHART].nut_entity = "output.L1.current.nominal";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_OUTPUT_VOLTS_A].nut_entity = "output.L1-N.voltage";
|
|
}
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_OUTPUT_FREQUENCY].nut_entity = "output.frequency";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_INPUT_FREQUENCY].nut_entity = "input.frequency";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_BYPASS_FREQUENCY].nut_entity = "input.bypass.frequency";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_BATTERY_CURRENT].nut_entity = "battery.current";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_BATTERY_VOLTAGE].nut_entity = "battery.voltage";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_PERCENT_BATTERY_LEFT].nut_entity = "battery.charge";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_BATTERY_TIME_REMAINING].nut_entity = "battery.runtime";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_BATTERY_DCUV_BAR_CHART].nut_entity = "battery.voltage.low";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_LOW_BATTERY_WARNING_V_BAR_CHART].nut_entity = "battery.charge.low";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_BATTERY_DISCHARGING_CURRENT_BAR_CHART].nut_entity = "battery.current.total";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_INPUT_VOLTS_PHASE_B].nut_entity = "input.L2-N.voltage";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_INPUT_VOLTS_PHASE_C].nut_entity = "input.L3-N.voltage";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_AMBIENT_TEMPERATURE].nut_entity = "ambient.temperature";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_HEATSINK_TEMPERATURE].nut_entity = "ups.temperature";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_POWER_SUPPLY_TEMPERATURE].nut_entity = "ambient.1.temperature";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_LOAD_CURRENT_PHASE_B].nut_entity = "output.L2.current";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_LOAD_CURRENT_PHASE_C].nut_entity = "output.L3.current";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_LOAD_CURRENT_PHASE_B_BAR_CHART].nut_entity = "output.L2.current.nominal";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_LOAD_CURRENT_PHASE_C_BAR_CHART].nut_entity = "output.L3.current.nominal";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_OUTPUT_VA_BAR_CHART].nut_entity = "ups.power.nominal";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_DATE].nut_entity = "ups.date";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_TIME].nut_entity = "ups.time";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_BATTERY_TEMPERATURE].nut_entity = "battery.temperature";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_OUTPUT_VOLTS_B].nut_entity = "output.L2-N.voltage";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_OUTPUT_VOLTS_C].nut_entity = "output.L3-N.voltage";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_OUTPUT_WATTS_PHASE_A].nut_entity = "ups.L1-N.realpower";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_OUTPUT_WATTS_PHASE_B].nut_entity = "ups.L2-N.realpower";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_OUTPUT_WATTS_PHASE_C].nut_entity = "ups.L3-N.realpower";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_OUTPUT_WATTS_PHASE_A_B_C_BAR_CHART].nut_entity = "ups.realpower.nominal";
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_LINE_EVENT_COUNTER].nut_entity = "input.quality";
|
|
}
|
|
|
|
void init_alarm_map()
|
|
{
|
|
/* Clean entire map */
|
|
memset(&bcmxcp_alarm_map, 0, sizeof(BCMXCP_ALARM_MAP_ENTRY_t) * BCMXCP_ALARM_MAP_MAX);
|
|
|
|
/* Set all alarm descriptions */
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INVERTER_AC_OVER_VOLTAGE].alarm_desc = "INVERTER_AC_OVER_VOLTAGE";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INVERTER_AC_UNDER_VOLTAGE].alarm_desc = "INVERTER_AC_UNDER_VOLTAGE";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INVERTER_OVER_OR_UNDER_FREQ].alarm_desc = "INVERTER_OVER_OR_UNDER_FREQ";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BYPASS_AC_OVER_VOLTAGE].alarm_desc = "BYPASS_AC_OVER_VOLTAGE";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BYPASS_AC_UNDER_VOLTAGE].alarm_desc = "BYPASS_AC_UNDER_VOLTAGE";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BYPASS_OVER_OR_UNDER_FREQ].alarm_desc = "BYPASS_OVER_OR_UNDER_FREQ";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INPUT_AC_OVER_VOLTAGE].alarm_desc = "INPUT_AC_OVER_VOLTAGE";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INPUT_AC_UNDER_VOLTAGE].alarm_desc = "INPUT_AC_UNDER_VOLTAGE";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INPUT_UNDER_OR_OVER_FREQ].alarm_desc = "INPUT_UNDER_OR_OVER_FREQ";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_OUTPUT_OVER_VOLTAGE].alarm_desc = "OUTPUT_OVER_VOLTAGE";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_OUTPUT_UNDER_VOLTAGE].alarm_desc = "OUTPUT_UNDER_VOLTAGE";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_OUTPUT_UNDER_OR_OVER_FREQ].alarm_desc = "OUTPUT_UNDER_OR_OVER_FREQ";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_REMOTE_EMERGENCY_PWR_OFF].alarm_desc = "REMOTE_EMERGENCY_PWR_OFF";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_REMOTE_GO_TO_BYPASS].alarm_desc = "REMOTE_GO_TO_BYPASS";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BUILDING_ALARM_6].alarm_desc = "BUILDING_ALARM_6";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BUILDING_ALARM_5].alarm_desc = "BUILDING_ALARM_5";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BUILDING_ALARM_4].alarm_desc = "BUILDING_ALARM_4";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BUILDING_ALARM_3].alarm_desc = "BUILDING_ALARM_3";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BUILDING_ALARM_2].alarm_desc = "BUILDING_ALARM_2";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BUILDING_ALARM_1].alarm_desc = "BUILDING_ALARM_1";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_STATIC_SWITCH_OVER_TEMP].alarm_desc = "STATIC_SWITCH_OVER_TEMP";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_CHARGER_OVER_TEMP].alarm_desc = "CHARGER_OVER_TEMP";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_CHARGER_LOGIC_PWR_FAIL].alarm_desc = "CHARGER_LOGIC_PWR_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_CHARGER_OVER_VOLTAGE_OR_CURRENT].alarm_desc = "CHARGER_OVER_VOLTAGE_OR_CURRENT";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INVERTER_OVER_TEMP].alarm_desc = "INVERTER_OVER_TEMP";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_OUTPUT_OVERLOAD].alarm_desc = "OUTPUT_OVERLOAD";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_RECTIFIER_INPUT_OVER_CURRENT].alarm_desc = "RECTIFIER_INPUT_OVER_CURRENT";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INVERTER_OUTPUT_OVER_CURRENT].alarm_desc = "INVERTER_OUTPUT_OVER_CURRENT";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_DC_LINK_OVER_VOLTAGE].alarm_desc = "DC_LINK_OVER_VOLTAGE";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_DC_LINK_UNDER_VOLTAGE].alarm_desc = "DC_LINK_UNDER_VOLTAGE";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_RECTIFIER_FAILED].alarm_desc = "RECTIFIER_FAILED";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INVERTER_FAULT].alarm_desc = "INVERTER_FAULT";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BATTERY_CONNECTOR_FAIL].alarm_desc = "BATTERY_CONNECTOR_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BYPASS_BREAKER_FAIL].alarm_desc = "BYPASS_BREAKER_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_CHARGER_FAIL].alarm_desc = "CHARGER_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_RAMP_UP_FAILED].alarm_desc = "RAMP_UP_FAILED";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_STATIC_SWITCH_FAILED].alarm_desc = "STATIC_SWITCH_FAILED";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_ANALOG_AD_REF_FAIL].alarm_desc = "ANALOG_AD_REF_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BYPASS_UNCALIBRATED].alarm_desc = "BYPASS_UNCALIBRATED";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_RECTIFIER_UNCALIBRATED].alarm_desc = "RECTIFIER_UNCALIBRATED";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_OUTPUT_UNCALIBRATED].alarm_desc = "OUTPUT_UNCALIBRATED";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INVERTER_UNCALIBRATED].alarm_desc = "INVERTER_UNCALIBRATED";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_DC_VOLT_UNCALIBRATED].alarm_desc = "DC_VOLT_UNCALIBRATED";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_OUTPUT_CURRENT_UNCALIBRATED].alarm_desc = "OUTPUT_CURRENT_UNCALIBRATED";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_RECTIFIER_CURRENT_UNCALIBRATED].alarm_desc = "RECTIFIER_CURRENT_UNCALIBRATED";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BATTERY_CURRENT_UNCALIBRATED].alarm_desc = "BATTERY_CURRENT_UNCALIBRATED";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INVERTER_ON_OFF_STAT_FAIL].alarm_desc = "INVERTER_ON_OFF_STAT_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BATTERY_CURRENT_LIMIT].alarm_desc = "BATTERY_CURRENT_LIMIT";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INVERTER_STARTUP_FAIL].alarm_desc = "INVERTER_STARTUP_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_ANALOG_BOARD_AD_STAT_FAIL].alarm_desc = "ANALOG_BOARD_AD_STAT_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_OUTPUT_CURRENT_OVER_100].alarm_desc = "OUTPUT_CURRENT_OVER_100";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BATTERY_GROUND_FAULT].alarm_desc = "BATTERY_GROUND_FAULT";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_WAITING_FOR_CHARGER_SYNC].alarm_desc = "WAITING_FOR_CHARGER_SYNC";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_NV_RAM_FAIL].alarm_desc = "NV_RAM_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_ANALOG_BOARD_AD_TIMEOUT].alarm_desc = "ANALOG_BOARD_AD_TIMEOUT";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_SHUTDOWN_IMMINENT].alarm_desc = "SHUTDOWN_IMMINENT";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BATTERY_LOW].alarm_desc = "BATTERY_LOW";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_UTILITY_FAIL].alarm_desc = "UTILITY_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_OUTPUT_SHORT_CIRCUIT].alarm_desc = "OUTPUT_SHORT_CIRCUIT";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_UTILITY_NOT_PRESENT].alarm_desc = "UTILITY_NOT_PRESENT";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_FULL_TIME_CHARGING].alarm_desc = "FULL_TIME_CHARGING";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_FAST_BYPASS_COMMAND].alarm_desc = "FAST_BYPASS_COMMAND";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_AD_ERROR].alarm_desc = "AD_ERROR";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INTERNAL_COM_FAIL].alarm_desc = "INTERNAL_COM_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_RECTIFIER_SELFTEST_FAIL].alarm_desc = "RECTIFIER_SELFTEST_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_RECTIFIER_EEPROM_FAIL].alarm_desc = "RECTIFIER_EEPROM_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_RECTIFIER_EPROM_FAIL].alarm_desc = "RECTIFIER_EPROM_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INPUT_LINE_VOLTAGE_LOSS].alarm_desc = "INPUT_LINE_VOLTAGE_LOSS";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BATTERY_DC_OVER_VOLTAGE].alarm_desc = "BATTERY_DC_OVER_VOLTAGE";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_POWER_SUPPLY_OVER_TEMP].alarm_desc = "POWER_SUPPLY_OVER_TEMP";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_POWER_SUPPLY_FAIL].alarm_desc = "POWER_SUPPLY_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_POWER_SUPPLY_5V_FAIL].alarm_desc = "POWER_SUPPLY_5V_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_POWER_SUPPLY_12V_FAIL].alarm_desc = "POWER_SUPPLY_12V_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_HEATSINK_OVER_TEMP].alarm_desc = "HEATSINK_OVER_TEMP";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_HEATSINK_TEMP_SENSOR_FAIL].alarm_desc = "HEATSINK_TEMP_SENSOR_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_RECTIFIER_CURRENT_OVER_125].alarm_desc = "RECTIFIER_CURRENT_OVER_125";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_RECTIFIER_FAULT_INTERRUPT_FAIL].alarm_desc = "RECTIFIER_FAULT_INTERRUPT_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_RECTIFIER_POWER_CAPASITOR_FAIL].alarm_desc = "RECTIFIER_POWER_CAPASITOR_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INVERTER_PROGRAM_STACK_ERROR].alarm_desc = "INVERTER_PROGRAM_STACK_ERROR";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INVERTER_BOARD_SELFTEST_FAIL].alarm_desc = "INVERTER_BOARD_SELFTEST_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INVERTER_AD_SELFTEST_FAIL].alarm_desc = "INVERTER_AD_SELFTEST_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INVERTER_RAM_SELFTEST_FAIL].alarm_desc = "INVERTER_RAM_SELFTEST_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_NV_MEMORY_CHECKSUM_FAIL].alarm_desc = "NV_MEMORY_CHECKSUM_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_PROGRAM_CHECKSUM_FAIL].alarm_desc = "PROGRAM_CHECKSUM_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INVERTER_CPU_SELFTEST_FAIL].alarm_desc = "INVERTER_CPU_SELFTEST_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_NETWORK_NOT_RESPONDING].alarm_desc = "NETWORK_NOT_RESPONDING";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_FRONT_PANEL_SELFTEST_FAIL].alarm_desc = "FRONT_PANEL_SELFTEST_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_NODE_EEPROM_VERIFICATION_ERROR].alarm_desc = "NODE_EEPROM_VERIFICATION_ERROR";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_OUTPUT_AC_OVER_VOLT_TEST_FAIL].alarm_desc = "OUTPUT_AC_OVER_VOLT_TEST_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_OUTPUT_DC_OVER_VOLTAGE].alarm_desc = "OUTPUT_DC_OVER_VOLTAGE";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INPUT_PHASE_ROTATION_ERROR].alarm_desc = "INPUT_PHASE_ROTATION_ERROR";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INVERTER_RAMP_UP_TEST_FAILED].alarm_desc = "INVERTER_RAMP_UP_TEST_FAILED";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INVERTER_OFF_COMMAND].alarm_desc = "INVERTER_OFF_COMMAND";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INVERTER_ON_COMMAND].alarm_desc = "INVERTER_ON_COMMAND";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_TO_BYPASS_COMMAND].alarm_desc = "TO_BYPASS_COMMAND";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_FROM_BYPASS_COMMAND].alarm_desc = "FROM_BYPASS_COMMAND";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_AUTO_MODE_COMMAND].alarm_desc = "AUTO_MODE_COMMAND";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_EMERGENCY_SHUTDOWN_COMMAND].alarm_desc = "EMERGENCY_SHUTDOWN_COMMAND";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_SETUP_SWITCH_OPEN].alarm_desc = "SETUP_SWITCH_OPEN";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INVERTER_OVER_VOLT_INT].alarm_desc = "INVERTER_OVER_VOLT_INT";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INVERTER_UNDER_VOLT_INT].alarm_desc = "INVERTER_UNDER_VOLT_INT";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_ABSOLUTE_DCOV_ACOV].alarm_desc = "ABSOLUTE_DCOV_ACOV";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_PHASE_A_CURRENT_LIMIT].alarm_desc = "PHASE_A_CURRENT_LIMIT";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_PHASE_B_CURRENT_LIMIT].alarm_desc = "PHASE_B_CURRENT_LIMIT";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_PHASE_C_CURRENT_LIMIT].alarm_desc = "PHASE_C_CURRENT_LIMIT";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BYPASS_NOT_AVAILABLE].alarm_desc = "BYPASS_NOT_AVAILABLE";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_RECTIFIER_BREAKER_OPEN].alarm_desc = "RECTIFIER_BREAKER_OPEN";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BATTERY_CONTACTOR_OPEN].alarm_desc = "BATTERY_CONTACTOR_OPEN";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INVERTER_CONTACTOR_OPEN].alarm_desc = "INVERTER_CONTACTOR_OPEN";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BYPASS_BREAKER_OPEN].alarm_desc = "BYPASS_BREAKER_OPEN";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INV_BOARD_ACOV_INT_TEST_FAIL].alarm_desc = "INV_BOARD_ACOV_INT_TEST_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INVERTER_OVER_TEMP_TRIP].alarm_desc = "INVERTER_OVER_TEMP_TRIP";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INV_BOARD_ACUV_INT_TEST_FAIL].alarm_desc = "INV_BOARD_ACUV_INT_TEST_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INVERTER_VOLTAGE_FEEDBACK_ERROR].alarm_desc = "INVERTER_VOLTAGE_FEEDBACK_ERROR";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_DC_UNDER_VOLTAGE_TIMEOUT].alarm_desc = "DC_UNDER_VOLTAGE_TIMEOUT";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_AC_UNDER_VOLTAGE_TIMEOUT].alarm_desc = "AC_UNDER_VOLTAGE_TIMEOUT";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_DC_UNDER_VOLTAGE_WHILE_CHARGE].alarm_desc = "DC_UNDER_VOLTAGE_WHILE_CHARGE";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INVERTER_VOLTAGE_BIAS_ERROR].alarm_desc = "INVERTER_VOLTAGE_BIAS_ERROR";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_RECTIFIER_PHASE_ROTATION].alarm_desc = "RECTIFIER_PHASE_ROTATION";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BYPASS_PHASER_ROTATION].alarm_desc = "BYPASS_PHASER_ROTATION";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_SYSTEM_INTERFACE_BOARD_FAIL].alarm_desc = "SYSTEM_INTERFACE_BOARD_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_PARALLEL_BOARD_FAIL].alarm_desc = "PARALLEL_BOARD_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_LOST_LOAD_SHARING_PHASE_A].alarm_desc = "LOST_LOAD_SHARING_PHASE_A";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_LOST_LOAD_SHARING_PHASE_B].alarm_desc = "LOST_LOAD_SHARING_PHASE_B";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_LOST_LOAD_SHARING_PHASE_C].alarm_desc = "LOST_LOAD_SHARING_PHASE_C";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_DC_OVER_VOLTAGE_TIMEOUT].alarm_desc = "DC_OVER_VOLTAGE_TIMEOUT";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BATTERY_TOTALLY_DISCHARGED].alarm_desc = "BATTERY_TOTALLY_DISCHARGED";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INVERTER_PHASE_BIAS_ERROR].alarm_desc = "INVERTER_PHASE_BIAS_ERROR";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INVERTER_VOLTAGE_BIAS_ERROR_2].alarm_desc = "INVERTER_VOLTAGE_BIAS_ERROR_2";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_DC_LINK_BLEED_COMPLETE].alarm_desc = "DC_LINK_BLEED_COMPLETE";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_LARGE_CHARGER_INPUT_CURRENT].alarm_desc = "LARGE_CHARGER_INPUT_CURRENT";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INV_VOLT_TOO_LOW_FOR_RAMP_LEVEL].alarm_desc = "INV_VOLT_TOO_LOW_FOR_RAMP_LEVEL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_LOSS_OF_REDUNDANCY].alarm_desc = "LOSS_OF_REDUNDANCY";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_LOSS_OF_SYNC_BUS].alarm_desc = "LOSS_OF_SYNC_BUS";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_RECTIFIER_BREAKER_SHUNT_TRIP].alarm_desc = "RECTIFIER_BREAKER_SHUNT_TRIP";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_LOSS_OF_CHARGER_SYNC].alarm_desc = "LOSS_OF_CHARGER_SYNC";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INVERTER_LOW_LEVEL_TEST_TIMEOUT].alarm_desc = "INVERTER_LOW_LEVEL_TEST_TIMEOUT";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_OUTPUT_BREAKER_OPEN].alarm_desc = "OUTPUT_BREAKER_OPEN";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_CONTROL_POWER_ON].alarm_desc = "CONTROL_POWER_ON";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INVERTER_ON].alarm_desc = "INVERTER_ON";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_CHARGER_ON].alarm_desc = "CHARGER_ON";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BYPASS_ON].alarm_desc = "BYPASS_ON";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BYPASS_POWER_LOSS].alarm_desc = "BYPASS_POWER_LOSS";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_ON_MANUAL_BYPASS].alarm_desc = "ON_MANUAL_BYPASS";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BYPASS_MANUAL_TURN_OFF].alarm_desc = "BYPASS_MANUAL_TURN_OFF";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INVERTER_BLEEDING_DC_LINK_VOLT].alarm_desc = "INVERTER_BLEEDING_DC_LINK_VOLT";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_CPU_ISR_ERROR].alarm_desc = "CPU_ISR_ERROR";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_SYSTEM_ISR_RESTART].alarm_desc = "SYSTEM_ISR_RESTART";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_PARALLEL_DC].alarm_desc = "PARALLEL_DC";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BATTERY_NEEDS_SERVICE].alarm_desc = "BATTERY_NEEDS_SERVICE";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BATTERY_CHARGING].alarm_desc = "BATTERY_CHARGING";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BATTERY_NOT_CHARGED].alarm_desc = "BATTERY_NOT_CHARGED";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_DISABLED_BATTERY_TIME].alarm_desc = "DISABLED_BATTERY_TIME";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_SERIES_7000_ENABLE].alarm_desc = "SERIES_7000_ENABLE";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_OTHER_UPS_ON].alarm_desc = "OTHER_UPS_ON";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_PARALLEL_INVERTER].alarm_desc = "PARALLEL_INVERTER";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_UPS_IN_PARALLEL].alarm_desc = "UPS_IN_PARALLEL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_OUTPUT_BREAKER_REALY_FAIL].alarm_desc = "OUTPUT_BREAKER_REALY_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_CONTROL_POWER_OFF].alarm_desc = "CONTROL_POWER_OFF";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_LEVEL_2_OVERLOAD_PHASE_A].alarm_desc = "LEVEL_2_OVERLOAD_PHASE_A";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_LEVEL_2_OVERLOAD_PHASE_B].alarm_desc = "LEVEL_2_OVERLOAD_PHASE_B";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_LEVEL_2_OVERLOAD_PHASE_C].alarm_desc = "LEVEL_2_OVERLOAD_PHASE_C";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_LEVEL_3_OVERLOAD_PHASE_A].alarm_desc = "LEVEL_3_OVERLOAD_PHASE_A";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_LEVEL_3_OVERLOAD_PHASE_B].alarm_desc = "LEVEL_3_OVERLOAD_PHASE_B";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_LEVEL_3_OVERLOAD_PHASE_C].alarm_desc = "LEVEL_3_OVERLOAD_PHASE_C";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_LEVEL_4_OVERLOAD_PHASE_A].alarm_desc = "LEVEL_4_OVERLOAD_PHASE_A";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_LEVEL_4_OVERLOAD_PHASE_B].alarm_desc = "LEVEL_4_OVERLOAD_PHASE_B";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_LEVEL_4_OVERLOAD_PHASE_C].alarm_desc = "LEVEL_4_OVERLOAD_PHASE_C";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_UPS_ON_BATTERY].alarm_desc = "UPS_ON_BATTERY";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_UPS_ON_BYPASS].alarm_desc = "UPS_ON_BYPASS";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_LOAD_DUMPED].alarm_desc = "LOAD_DUMPED";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_LOAD_ON_INVERTER].alarm_desc = "LOAD_ON_INVERTER";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_UPS_ON_COMMAND].alarm_desc = "UPS_ON_COMMAND";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_UPS_OFF_COMMAND].alarm_desc = "UPS_OFF_COMMAND";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_LOW_BATTERY_SHUTDOWN].alarm_desc = "LOW_BATTERY_SHUTDOWN";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_AUTO_ON_ENABLED].alarm_desc = "AUTO_ON_ENABLED";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_SOFTWARE_INCOMPABILITY_DETECTED].alarm_desc = "SOFTWARE_INCOMPABILITY_DETECTED";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INVERTER_TEMP_SENSOR_FAILED].alarm_desc = "INVERTER_TEMP_SENSOR_FAILED";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_DC_START_OCCURED].alarm_desc = "DC_START_OCCURED";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_IN_PARALLEL_OPERATION].alarm_desc = "IN_PARALLEL_OPERATION";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_SYNCING_TO_BYPASS].alarm_desc = "SYNCING_TO_BYPASS";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_RAMPING_UPS_UP].alarm_desc = "RAMPING_UPS_UP";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INVERTER_ON_DELAY].alarm_desc = "INVERTER_ON_DELAY";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_CHARGER_ON_DELAY].alarm_desc = "CHARGER_ON_DELAY";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_WAITING_FOR_UTIL_INPUT].alarm_desc = "WAITING_FOR_UTIL_INPUT";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_CLOSE_BYPASS_BREAKER].alarm_desc = "CLOSE_BYPASS_BREAKER";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_TEMPORARY_BYPASS_OPERATION].alarm_desc = "TEMPORARY_BYPASS_OPERATION";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_SYNCING_TO_OUTPUT].alarm_desc = "SYNCING_TO_OUTPUT";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BYPASS_FAILURE].alarm_desc = "BYPASS_FAILURE";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_AUTO_OFF_COMMAND_EXECUTED].alarm_desc = "AUTO_OFF_COMMAND_EXECUTED";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_AUTO_ON_COMMAND_EXECUTED].alarm_desc = "AUTO_ON_COMMAND_EXECUTED";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BATTERY_TEST_FAILED].alarm_desc = "BATTERY_TEST_FAILED";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_FUSE_FAIL].alarm_desc = "FUSE_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_FAN_FAIL].alarm_desc = "FAN_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_SITE_WIRING_FAULT].alarm_desc = "SITE_WIRING_FAULT";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BACKFEED_CONTACTOR_FAIL].alarm_desc = "BACKFEED_CONTACTOR_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_ON_BUCK].alarm_desc = "ON_BUCK";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_ON_BOOST].alarm_desc = "ON_BOOST";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_ON_DOUBLE_BOOST].alarm_desc = "ON_DOUBLE_BOOST";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BATTERIES_DISCONNECTED].alarm_desc = "BATTERIES_DISCONNECTED";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_UPS_CABINET_OVER_TEMP].alarm_desc = "UPS_CABINET_OVER_TEMP";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_TRANSFORMER_OVER_TEMP].alarm_desc = "TRANSFORMER_OVER_TEMP";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_AMBIENT_UNDER_TEMP].alarm_desc = "AMBIENT_UNDER_TEMP";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_AMBIENT_OVER_TEMP].alarm_desc = "AMBIENT_OVER_TEMP";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_CABINET_DOOR_OPEN].alarm_desc = "CABINET_DOOR_OPEN";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_CABINET_DOOR_OPEN_VOLT_PRESENT].alarm_desc = "CABINET_DOOR_OPEN_VOLT_PRESENT";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_AUTO_SHUTDOWN_PENDING].alarm_desc = "AUTO_SHUTDOWN_PENDING";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_TAP_SWITCHING_REALY_PENDING].alarm_desc = "TAP_SWITCHING_REALY_PENDING";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_UNABLE_TO_CHARGE_BATTERIES].alarm_desc = "UNABLE_TO_CHARGE_BATTERIES";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_STARTUP_FAILURE_CHECK_EPO].alarm_desc = "STARTUP_FAILURE_CHECK_EPO";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_AUTOMATIC_STARTUP_PENDING].alarm_desc = "AUTOMATIC_STARTUP_PENDING";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_MODEM_FAILED].alarm_desc = "MODEM_FAILED";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INCOMING_MODEM_CALL_STARTED].alarm_desc = "INCOMING_MODEM_CALL_STARTED";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_OUTGOING_MODEM_CALL_STARTED].alarm_desc = "OUTGOING_MODEM_CALL_STARTED";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_MODEM_CONNECTION_ESTABLISHED].alarm_desc = "MODEM_CONNECTION_ESTABLISHED";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_MODEM_CALL_COMPLETED_SUCCESS].alarm_desc = "MODEM_CALL_COMPLETED_SUCCESS";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_MODEM_CALL_COMPLETED_FAIL].alarm_desc = "MODEM_CALL_COMPLETED_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INPUT_BREAKER_FAIL].alarm_desc = "INPUT_BREAKER_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_SYSINIT_IN_PROGRESS].alarm_desc = "SYSINIT_IN_PROGRESS";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_AUTOCALIBRATION_FAIL].alarm_desc = "AUTOCALIBRATION_FAIL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_SELECTIVE_TRIP_OF_MODULE].alarm_desc = "SELECTIVE_TRIP_OF_MODULE";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INVERTER_OUTPUT_FAILURE].alarm_desc = "INVERTER_OUTPUT_FAILURE";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_ABNORMAL_OUTPUT_VOLT_AT_STARTUP].alarm_desc = "ABNORMAL_OUTPUT_VOLT_AT_STARTUP";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_RECTIFIER_OVER_TEMP].alarm_desc = "RECTIFIER_OVER_TEMP";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_CONFIG_ERROR].alarm_desc = "CONFIG_ERROR";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_REDUNDANCY_LOSS_DUE_TO_OVERLOAD].alarm_desc = "REDUNDANCY_LOSS_DUE_TO_OVERLOAD";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_ON_ALTERNATE_AC_SOURCE].alarm_desc = "ON_ALTERNATE_AC_SOURCE";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_IN_HIGH_EFFICIENCY_MODE].alarm_desc = "IN_HIGH_EFFICIENCY_MODE";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_SYSTEM_NOTICE_ACTIVE].alarm_desc = "SYSTEM_NOTICE_ACTIVE";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_SYSTEM_ALARM_ACTIVE].alarm_desc = "SYSTEM_ALARM_ACTIVE";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_ALTERNATE_POWER_SOURCE_NOT_AVAILABLE].alarm_desc = "ALTERNATE_POWER_SOURCE_NOT_AVAILABLE";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_CURRENT_BALANCE_FAILURE].alarm_desc = "CURRENT_BALANCE_FAILURE";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_CHECK_AIR_FILTER].alarm_desc = "CHECK_AIR_FILTER";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_SUBSYSTEM_NOTICE_ACTIVE].alarm_desc = "SUBSYSTEM_NOTICE_ACTIVE";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_SUBSYSTEM_ALARM_ACTIVE].alarm_desc = "SUBSYSTEM_ALARM_ACTIVE";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_CHARGER_ON_COMMAND].alarm_desc = "CHARGER_ON_COMMAND";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_CHARGER_OFF_COMMAND].alarm_desc = "CHARGER_OFF_COMMAND";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_UPS_NORMAL].alarm_desc = "UPS_NORMAL";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_INVERTER_PHASE_ROTATION].alarm_desc = "INVERTER_PHASE_ROTATION";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_UPS_OFF].alarm_desc = "UPS_OFF";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_EXTERNAL_COMMUNICATION_FAILURE].alarm_desc = "EXTERNAL_COMMUNICATION_FAILURE";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BATTERY_TEST_INPROGRESS].alarm_desc = "BATTERY_TEST_INPROGRESS";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_SYSTEM_TEST_INPROGRESS].alarm_desc = "SYSTEM_TEST_INPROGRESS";
|
|
bcmxcp_alarm_map[BCMXCP_ALARM_BATTERY_TEST_ABORTED].alarm_desc = "BATTERY_TEST_ABORTED";
|
|
}
|
|
|
|
/* Get information on UPS commands */
|
|
bool_t init_command(int size)
|
|
{
|
|
unsigned char answer[PW_ANSWER_MAX_SIZE];
|
|
unsigned char commandByte;
|
|
const char* nutvalue;
|
|
int res, iIndex = 0, ncounter, NumComms = 0, i;
|
|
|
|
upsdebugx(1, "entering init_command(%i)", size);
|
|
|
|
res = command_read_sequence(PW_COMMAND_LIST_REQ, answer);
|
|
if (res <= 0)
|
|
{
|
|
upsdebugx(2, "No command list block.");
|
|
return FALSE;
|
|
}
|
|
else
|
|
{
|
|
upsdebugx(2, "Command list block supported.");
|
|
|
|
res = answer[iIndex];
|
|
NumComms = (int)res; /* Number of commands implemented in this UPS */
|
|
upsdebugx(3, "Number of commands implemented in ups %d", res);
|
|
iIndex++;
|
|
res = answer[iIndex]; /* Entry length - bytes reported for each command */
|
|
iIndex++;
|
|
upsdebugx(5, "bytes per command %d", res);
|
|
|
|
/* In case of debug - make explanation of values */
|
|
upsdebugx(2, "Index\tCmd byte\tDescription");
|
|
|
|
/* Get command bytes if size of command block matches with size from standard ID block */
|
|
if (NumComms + 2 == size)
|
|
{
|
|
for (ncounter = 0; ncounter < NumComms; ncounter++)
|
|
{
|
|
commandByte = answer[iIndex];
|
|
if(commandByte >= 0 && commandByte < BCMXCP_COMMAND_MAP_MAX) {
|
|
upsdebugx(2, "%03d\t%02x\t%s", ncounter, commandByte, bcmxcp_command_map[commandByte].command_desc);
|
|
bcmxcp_command_map[commandByte].command_byte = commandByte;
|
|
}
|
|
else {
|
|
upsdebugx(2, "%03d\t%02x\t%s", ncounter, commandByte, "Unknown command, the commandByte is not mapped");
|
|
}
|
|
|
|
iIndex++;
|
|
}
|
|
|
|
/* Map supported commands to instcmd */
|
|
for(i = 0; i < BCMXCP_COMMAND_MAP_MAX; i++) {
|
|
if(bcmxcp_command_map[i].command_desc != NULL) {
|
|
if(bcmxcp_command_map[i].command_byte > 0) {
|
|
if ((nutvalue = nut_find_infoval(command_map_info, bcmxcp_command_map[i].command_byte, FALSE)) != NULL) {
|
|
dstate_addcmd(nutvalue);
|
|
upsdebugx(2, "Added support for instcmd %s", nutvalue);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
return TRUE;
|
|
}
|
|
else {
|
|
upsdebugx(1, "Invalid response received from Command List block");
|
|
return FALSE;
|
|
}
|
|
}
|
|
}
|
|
|
|
void init_ups_meter_map(const unsigned char *map, unsigned char len)
|
|
{
|
|
unsigned int iIndex, iOffset = 0;
|
|
|
|
/* In case of debug - make explanation of values */
|
|
upsdebugx(2, "Index\tOffset\tFormat\tNUT");
|
|
|
|
/* Loop thru map */
|
|
for (iIndex = 0; iIndex < len && iIndex < BCMXCP_METER_MAP_MAX; iIndex++)
|
|
{
|
|
bcmxcp_meter_map[iIndex].format = map[iIndex];
|
|
if (map[iIndex] != 0)
|
|
{
|
|
/* Set meter map entry offset */
|
|
bcmxcp_meter_map[iIndex].meter_block_index = iOffset;
|
|
|
|
/* Debug info */
|
|
upsdebugx(2, "%04d\t%04d\t%2x\t%s", iIndex, iOffset, bcmxcp_meter_map[iIndex].format,
|
|
(bcmxcp_meter_map[iIndex].nut_entity == NULL ? "None" :bcmxcp_meter_map[iIndex].nut_entity));
|
|
|
|
iOffset += 4;
|
|
}
|
|
}
|
|
upsdebugx(2, "\n");
|
|
}
|
|
|
|
void decode_meter_map_entry(const unsigned char *entry, const unsigned char format, char* value)
|
|
{
|
|
long lValue = 0;
|
|
char sFormat[32];
|
|
float fValue;
|
|
unsigned char dd, mm, yy, cc, hh, ss;
|
|
|
|
/* Paranoid input sanity checks */
|
|
if (value == NULL)
|
|
return;
|
|
*value = '\0';
|
|
if (entry == (unsigned char *)NULL || format == 0x00)
|
|
return;
|
|
|
|
/* Get data based on format */
|
|
if (format == 0xf0) {
|
|
/* Long integer */
|
|
lValue = get_long(entry);
|
|
snprintf(value, 127, "%d", (int)lValue);
|
|
}
|
|
else if ((format & 0xf0) == 0xf0) {
|
|
/* Fixed point integer */
|
|
fValue = get_long(entry) / ldexp(1, format & 0x0f);
|
|
snprintf(value, 127, "%.2f", fValue);
|
|
}
|
|
else if (format <= 0x97) {
|
|
/* Floating point */
|
|
fValue = get_float(entry);
|
|
/* Format is packed BCD */
|
|
snprintf(sFormat, 31, "%%%d.%df", ((format & 0xf0) >> 4), (format & 0x0f));
|
|
snprintf(value, 127, sFormat, fValue);
|
|
}
|
|
else if (format == 0xe2) {
|
|
/* Seconds */
|
|
lValue = get_long(entry);
|
|
snprintf(value, 127, "%d", (int)lValue);
|
|
}
|
|
else if (format == 0xe0) {
|
|
/* Date */
|
|
/* Format is packed BCD for each byte, and cc uses most signifcant bit to signal date format */
|
|
dd = entry[0];
|
|
mm = entry[1];
|
|
yy = entry[2];
|
|
cc = entry[3];
|
|
|
|
/* Check format type */
|
|
if (cc & 0x80) {
|
|
/* Month:Day format */
|
|
snprintf(value, 127, "%d%d/%d%d/%d%d%d%d", ((dd & 0xf0) >> 4), (dd & 0x0f), ((mm & 0xf0) >> 4), (mm & 0x0f), (((cc & 0x7f) & 0xf0) >> 4), ((cc & 0x7f) & 0x0f), ((yy & 0xf0) >> 4), (yy & 0x0f));
|
|
}
|
|
else {
|
|
/* Julian format */
|
|
/* TODO test this, unsure if the day part is correct, i.e. how we use the two bytes mm and dd to calculate the number of julian days */
|
|
snprintf(value, 127, "%d%d%d%d:%d%d%d", (((cc & 0x7f) & 0xf0) >> 4), ((cc & 0x7f) & 0x0f), ((yy & 0xf0) >> 4), (yy & 0x0f), (mm & 0x0f), ((dd & 0xf0) >> 4), (dd & 0x0f));
|
|
}
|
|
}
|
|
else if (format == 0xe1) {
|
|
/* Time */
|
|
/* Format is packed BCD for each byte */
|
|
cc = entry[0];
|
|
ss = entry[1];
|
|
mm = entry[2];
|
|
hh = entry[3];
|
|
|
|
snprintf(value, 127, "%d%d:%d%d:%d%d.%d%d", ((hh & 0xf0) >> 4), (hh & 0x0f), ((mm & 0xf0) >> 4), (mm & 0x0f), ((ss & 0xf0) >> 4), (ss & 0x0f), ((cc & 0xf0) >> 4), (cc & 0x0f));
|
|
}
|
|
else {
|
|
/* Unknown format */
|
|
snprintf(value, 127, "???");
|
|
return;
|
|
}
|
|
return;
|
|
}
|
|
|
|
|
|
void init_ups_alarm_map(const unsigned char *map, unsigned char len)
|
|
{
|
|
unsigned int iIndex = 0;
|
|
int alarm = 0;
|
|
|
|
/* In case of debug - make explanation of values */
|
|
upsdebugx(2, "Index\tAlarm\tSupported");
|
|
|
|
/* Loop thru map */
|
|
for (iIndex = 0; iIndex < len && iIndex < BCMXCP_ALARM_MAP_MAX / 8; iIndex++)
|
|
{
|
|
/* Bit 0 */
|
|
if(set_alarm_support_in_alarm_map(map, iIndex, 0x01, iIndex * 8, alarm) == TRUE)
|
|
alarm++;
|
|
/* Bit 1 */
|
|
if(set_alarm_support_in_alarm_map(map, iIndex, 0x02, iIndex * 8 + 1, alarm) == TRUE)
|
|
alarm++;
|
|
/* Bit 2 */
|
|
if(set_alarm_support_in_alarm_map(map, iIndex, 0x04, iIndex * 8 + 2, alarm) == TRUE)
|
|
alarm++;
|
|
/* Bit 3 */
|
|
if(set_alarm_support_in_alarm_map(map, iIndex, 0x08, iIndex * 8 + 3, alarm) == TRUE)
|
|
alarm++;
|
|
/* Bit 4 */
|
|
if(set_alarm_support_in_alarm_map(map, iIndex, 0x10, iIndex * 8 + 4, alarm) == TRUE)
|
|
alarm++;
|
|
/* Bit 5 */
|
|
if(set_alarm_support_in_alarm_map(map, iIndex, 0x20, iIndex * 8 + 5, alarm) == TRUE)
|
|
alarm++;
|
|
/* Bit 6 */
|
|
if(set_alarm_support_in_alarm_map(map, iIndex, 0x40, iIndex * 8 + 6, alarm) == TRUE)
|
|
alarm++;
|
|
/* Bit 7 */
|
|
if(set_alarm_support_in_alarm_map(map, iIndex, 0x80, iIndex * 8 + 7, alarm) == TRUE)
|
|
alarm++;
|
|
}
|
|
upsdebugx(2, "\n");
|
|
}
|
|
|
|
bool_t set_alarm_support_in_alarm_map(const unsigned char *map, const int mapIndex, const int bitmask, const int alarmMapIndex, const int alarmBlockIndex) {
|
|
/* Check what the alarm block tells about the support for the alarm */
|
|
if (map[mapIndex] & bitmask)
|
|
{
|
|
/* Set alarm active */
|
|
bcmxcp_alarm_map[alarmMapIndex].alarm_block_index = alarmBlockIndex;
|
|
}
|
|
else
|
|
{
|
|
/* Set alarm inactive */
|
|
bcmxcp_alarm_map[alarmMapIndex].alarm_block_index = -1;
|
|
}
|
|
|
|
/* Return if the alarm was supported or not */
|
|
if(bcmxcp_alarm_map[alarmMapIndex].alarm_block_index >= 0) {
|
|
/* Debug info */
|
|
upsdebugx(2, "%04d\t%s\tYes", bcmxcp_alarm_map[alarmMapIndex].alarm_block_index, bcmxcp_alarm_map[alarmMapIndex].alarm_desc);
|
|
return TRUE;
|
|
}
|
|
else {
|
|
/* Debug info */
|
|
upsdebugx(3, "%04d\t%s\tNo", bcmxcp_alarm_map[alarmMapIndex].alarm_block_index, bcmxcp_alarm_map[alarmMapIndex].alarm_desc);
|
|
return FALSE;
|
|
}
|
|
}
|
|
|
|
int init_outlet(unsigned char len)
|
|
{
|
|
unsigned char answer[PW_ANSWER_MAX_SIZE];
|
|
int iIndex = 0, res, num;
|
|
int num_outlet, size_outlet;
|
|
int outlet_num, outlet_state;
|
|
short auto_dly_off, auto_dly_on;
|
|
char outlet_name[25];
|
|
|
|
res = command_read_sequence(PW_OUT_MON_BLOCK_REQ, answer);
|
|
if (res <= 0)
|
|
fatal_with_errno(EXIT_FAILURE, "Could not communicate with the ups");
|
|
else
|
|
upsdebugx(1, "init_outlet(%i), res=%i", len, res);
|
|
|
|
num_outlet = answer[iIndex++];
|
|
upsdebugx(2, "Number of outlets: %d", num_outlet);
|
|
|
|
size_outlet = answer[iIndex++];
|
|
upsdebugx(2, "Number of bytes: %d", size_outlet);
|
|
|
|
for(num = 1 ; num <= num_outlet ; num++) {
|
|
outlet_num = answer[iIndex++];
|
|
upsdebugx(2, "Outlet number: %d", outlet_num);
|
|
snprintf(outlet_name, sizeof(outlet_name)-1, "outlet.%d.id", num);
|
|
dstate_setinfo(outlet_name, "%d", outlet_num);
|
|
|
|
outlet_state = answer[iIndex++];
|
|
upsdebugx(2, "Outlet state: %d", outlet_state);
|
|
snprintf(outlet_name, sizeof(outlet_name)-1, "outlet.%d.status", num);
|
|
if (outlet_state>0 && outlet_state <9 )
|
|
dstate_setinfo(outlet_name, "%s", OutletStatus[outlet_state] );
|
|
|
|
auto_dly_off = get_word(answer+iIndex);
|
|
iIndex += 2;
|
|
upsdebugx(2, "Auto delay off: %d", auto_dly_off);
|
|
snprintf(outlet_name, sizeof(outlet_name)-1, "outlet.%d.delay.shutdown", num);
|
|
dstate_setinfo(outlet_name, "%d", auto_dly_off);
|
|
dstate_setflags(outlet_name, ST_FLAG_RW | ST_FLAG_STRING);
|
|
dstate_setaux(outlet_name, 5);
|
|
|
|
auto_dly_on = get_word(answer+iIndex);
|
|
iIndex += 2;
|
|
upsdebugx(2, "Auto delay on: %d", auto_dly_on);
|
|
snprintf(outlet_name, sizeof(outlet_name)-1, "outlet.%d.delay.start", num);
|
|
dstate_setinfo(outlet_name, "%d", auto_dly_on);
|
|
dstate_setflags(outlet_name, ST_FLAG_RW | ST_FLAG_STRING);
|
|
dstate_setaux(outlet_name, 5);
|
|
}
|
|
|
|
return num_outlet;
|
|
}
|
|
|
|
void init_ext_vars(void)
|
|
{
|
|
unsigned char answer[PW_ANSWER_MAX_SIZE],cbuf[5];
|
|
int length=0,index=0;
|
|
|
|
send_write_command(AUTHOR, 4);
|
|
|
|
sleep(PW_SLEEP); /* Need to. Have to wait at least 0,25 sec max 16 sec */
|
|
|
|
cbuf[0] = PW_SET_CONF_COMMAND;
|
|
cbuf[1] = PW_CONF_REQ;
|
|
cbuf[2] = 0x0;
|
|
cbuf[3] = 0x0;
|
|
|
|
length=command_write_sequence(cbuf,4,answer);
|
|
if (length <= 0)
|
|
fatal_with_errno(EXIT_FAILURE, "Could not communicate with the ups");
|
|
if (length < 4) //UPS dont have configurable vars
|
|
return;
|
|
for( index=3; index < length; index++) {
|
|
switch(answer[index]){
|
|
case PW_CONF_LOW_DEV_LIMIT: dstate_setinfo("input.transfer.boost.high","%d",0);
|
|
dstate_setflags("input.transfer.boost.high", ST_FLAG_RW | ST_FLAG_STRING);
|
|
dstate_setaux("input.transfer.boost.high", 3);
|
|
break;
|
|
|
|
case PW_CONF_HIGH_DEV_LIMIT: dstate_setinfo("input.transfer.trim.low","%d",0);
|
|
dstate_setflags("input.transfer.trim.low", ST_FLAG_RW | ST_FLAG_STRING);
|
|
dstate_setaux("input.transfer.trim.low", 3);
|
|
break;
|
|
|
|
case PW_CONF_LOW_BATT: dstate_setinfo("battery.runtime.low","%d",0);
|
|
dstate_setflags("battery.runtime.low", ST_FLAG_RW | ST_FLAG_STRING);
|
|
dstate_setaux("battery.runtime.low", 2);
|
|
break;
|
|
|
|
case PW_CONF_BEEPER: dstate_addcmd("beeper.disable");
|
|
dstate_addcmd("beeper.enable");
|
|
dstate_addcmd("beeper.mute");
|
|
break;
|
|
|
|
case PW_CONF_RETURN_DELAY: dstate_setinfo("input.transfer.delay","%d",0);
|
|
dstate_setflags("input.transfer.delay", ST_FLAG_RW | ST_FLAG_STRING);
|
|
dstate_setaux("input.transfer.delay", 5);
|
|
break;
|
|
|
|
case PW_CONF_RETURN_CAP: dstate_setinfo("battery.charge.restart","%d",0);
|
|
dstate_setflags("battery.charge.restart", ST_FLAG_RW | ST_FLAG_STRING);
|
|
dstate_setaux("battery.charge.restart", 3);
|
|
break;
|
|
|
|
case PW_CONF_MAX_TEMP: dstate_setinfo("ambient.temperature.high","%d",0);
|
|
dstate_setflags("ambient.temperature.high", ST_FLAG_RW | ST_FLAG_STRING);
|
|
dstate_setaux("ambient.temperature.high", 3);
|
|
break;
|
|
|
|
case PW_CONF_NOMINAL_OUT_VOLTAGE: dstate_setinfo("output.voltage.nominal","%d",0);
|
|
dstate_setflags("output.voltage.nominal", ST_FLAG_RW | ST_FLAG_STRING);
|
|
dstate_setaux("output.voltage.nominal", 3);
|
|
break;
|
|
|
|
case PW_CONF_SLEEP_TH_LOAD: dstate_setinfo("battery.energysave.load","%d",0);
|
|
dstate_setflags("battery.energysave.load", ST_FLAG_RW | ST_FLAG_STRING);
|
|
dstate_setaux("battery.energysave.load", 3);
|
|
break;
|
|
|
|
case PW_CONF_SLEEP_DELAY: dstate_setinfo("battery.energysave.delay","%d",0);
|
|
dstate_setflags("battery.energysave.delay", ST_FLAG_RW | ST_FLAG_STRING);
|
|
dstate_setaux("battery.energysave.delay", 3);
|
|
break;
|
|
|
|
case PW_CONF_BATT_STRINGS: dstate_setinfo("battery.packs","%d",0);
|
|
dstate_setflags("battery.packs", ST_FLAG_RW | ST_FLAG_STRING);
|
|
dstate_setaux("battery.packs", 1);
|
|
break;
|
|
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
void init_config(void)
|
|
{
|
|
unsigned char answer[PW_ANSWER_MAX_SIZE];
|
|
int voltage = 0, frequency = 0, res, tmp=0;
|
|
char sValue[17];
|
|
char sPartNumber[17];
|
|
|
|
res = command_read_sequence(PW_CONFIG_BLOCK_REQ, answer);
|
|
if (res <= 0)
|
|
fatal_with_errno(EXIT_FAILURE, "Could not communicate with the ups");
|
|
|
|
/* Get validation mask for status bitmap */
|
|
bcmxcp_status.topology_mask = answer[BCMXCP_CONFIG_BLOCK_HW_MODULES_INSTALLED_BYTE3];
|
|
|
|
/* Nominal output voltage of ups */
|
|
voltage = get_word((answer + BCMXCP_CONFIG_BLOCK_NOMINAL_OUTPUT_VOLTAGE));
|
|
if (voltage != 0)
|
|
dstate_setinfo("output.voltage.nominal", "%d", voltage);
|
|
|
|
/* Nominal Output Frequency */
|
|
frequency = get_word((answer+BCMXCP_CONFIG_BLOCK_NOMINAL_OUTPUT_FREQ));
|
|
if (frequency != 0)
|
|
dstate_setinfo("output.frequency.nominal", "%d", frequency);
|
|
|
|
/*Number of EBM*/
|
|
tmp = (int) *(answer + BCMXCP_CONFIG_BLOCK_BATTERY_DATA_WORD3);
|
|
if (tmp != 0)
|
|
dstate_setinfo("battery.packs", "%d", tmp);
|
|
|
|
/* UPS serial number */
|
|
snprintf(sValue, sizeof(sValue), "%s", answer + BCMXCP_CONFIG_BLOCK_SERIAL_NUMBER);
|
|
if(sValue[0] != '\0')
|
|
dstate_setinfo("ups.serial", "%s", sValue);
|
|
|
|
/* UPS Part Number*/
|
|
snprintf(sPartNumber, sizeof(sPartNumber), "%s", answer + BCMXCP_CONFIG_BLOCK_PART_NUMBER);
|
|
if(sPartNumber[0] != '\0')
|
|
dstate_setinfo("device.part", "%s", sPartNumber);
|
|
}
|
|
|
|
void init_limit(void)
|
|
{
|
|
unsigned char answer[PW_ANSWER_MAX_SIZE];
|
|
int value, res;
|
|
|
|
res = command_read_sequence(PW_LIMIT_BLOCK_REQ, answer);
|
|
if (res <= 0) {
|
|
fatal_with_errno(EXIT_FAILURE, "Could not communicate with the ups");
|
|
}
|
|
|
|
/* Nominal input voltage */
|
|
value = get_word((answer + BCMXCP_EXT_LIMITS_BLOCK_NOMINAL_INPUT_VOLTAGE));
|
|
if (value != 0) {
|
|
dstate_setinfo("input.voltage.nominal", "%d", value);
|
|
}
|
|
|
|
/* Nominal input frequency */
|
|
value = get_word((answer + BCMXCP_EXT_LIMITS_BLOCK_NOMINAL_INPUT_FREQ));
|
|
if (value != 0) {
|
|
int fnom = value;
|
|
dstate_setinfo("input.frequency.nominal", "%d", value);
|
|
|
|
/* Input frequency deviation */
|
|
value = get_word((answer + BCMXCP_EXT_LIMITS_BLOCK_FREQ_DEV_LIMIT));
|
|
|
|
if (value != 0) {
|
|
value /= 100;
|
|
dstate_setinfo("input.frequency.low", "%d", fnom - value);
|
|
dstate_setinfo("input.frequency.high", "%d", fnom + value);
|
|
}
|
|
}
|
|
|
|
/* Bypass Voltage Low Deviation Limit / Transfer to Boost Voltage */
|
|
value = get_word((answer + BCMXCP_EXT_LIMITS_BLOCK_VOLTAGE_LOW_DEV_LIMIT));
|
|
if (value != 0) {
|
|
dstate_setinfo("input.transfer.boost.high", "%d", value);
|
|
}
|
|
|
|
/* Bypass Voltage High Deviation Limit / Transfer to Buck Voltage */
|
|
value = get_word((answer + BCMXCP_EXT_LIMITS_BLOCK_VOLTAGE_HIGE_DEV_LIMIT));
|
|
if (value != 0) {
|
|
dstate_setinfo("input.transfer.trim.low", "%d", value);
|
|
}
|
|
|
|
/* Low battery warning */
|
|
bcmxcp_status.lowbatt = answer[BCMXCP_EXT_LIMITS_BLOCK_LOW_BATT_WARNING] * 60;
|
|
|
|
/* Check if we should warn the user that her shutdown delay is to long? */
|
|
if (bcmxcp_status.shutdowndelay > bcmxcp_status.lowbatt)
|
|
upslogx(LOG_WARNING, "Shutdown delay longer than battery capacity when Low Battery warning is given. (max %d seconds)", bcmxcp_status.lowbatt);
|
|
|
|
/* Horn Status: */
|
|
value = answer[BCMXCP_EXT_LIMITS_BLOCK_HORN_STATUS];
|
|
if (value >= 0 && value <= 2) {
|
|
dstate_setinfo("ups.beeper.status", "%s", horn_stat[value]);
|
|
}
|
|
|
|
/* Minimum Supported Input Voltage */
|
|
value = get_word((answer + BCMXCP_EXT_LIMITS_BLOCK_MIN_INPUT_VOLTAGE));
|
|
if (value != 0) {
|
|
dstate_setinfo("input.transfer.low", "%d", value);
|
|
}
|
|
|
|
/* Maximum Supported Input Voltage */
|
|
value = get_word((answer + BCMXCP_EXT_LIMITS_BLOCK_MAX_INPUT_VOLTAGE));
|
|
if (value != 0) {
|
|
dstate_setinfo("input.transfer.high", "%d", value);
|
|
}
|
|
|
|
/* Ambient Temperature Lower Alarm Limit */
|
|
value = answer[BCMXCP_EXT_LIMITS_BLOCK_AMBIENT_TEMP_LOW];
|
|
if (value != 0) {
|
|
dstate_setinfo("ambient.temperature.low", "%d", value);
|
|
}
|
|
|
|
/* Ambient Temperature Upper Alarm Limit */
|
|
value = answer[BCMXCP_EXT_LIMITS_BLOCK_AMBIENT_TEMP_HIGE];
|
|
if (value != 0) {
|
|
dstate_setinfo("ambient.temperature.high", "%d", value);
|
|
}
|
|
|
|
/*Sleep minimum load*/
|
|
value = answer[BCMXCP_EXT_LIMITS_BLOCK_SLEEP_TH_LOAD];
|
|
if (value != 0) {
|
|
dstate_setinfo("battery.energysave.load", "%d", value);
|
|
}
|
|
|
|
/* Sleep delay*/
|
|
value = answer[BCMXCP_EXT_LIMITS_BLOCK_SLEEP_DELAY];
|
|
if (value != 0) {
|
|
dstate_setinfo("battery.energysave.delay", "%d", value);
|
|
}
|
|
|
|
/* Low batt minutes warning*/
|
|
value = answer[BCMXCP_EXT_LIMITS_BLOCK_LOW_BATT_WARNING];
|
|
if (value != 0) {
|
|
dstate_setinfo("battery.runtime.low", "%d", value);
|
|
}
|
|
|
|
/* Return to mains delay */
|
|
value = get_word(answer + BCMXCP_EXT_LIMITS_BLOCK_RETURN_STAB_DELAY);
|
|
if (value != 0) {
|
|
dstate_setinfo("input.transfer.delay","%d",value);
|
|
}
|
|
|
|
/* Minimum return capacity*/
|
|
value = answer[BCMXCP_EXT_LIMITS_BLOCK_BATT_CAPACITY_RETURN];
|
|
if (value != 0) {
|
|
dstate_setinfo("battery.charge.restart","%d",value);
|
|
}
|
|
|
|
}
|
|
|
|
void init_topology(void)
|
|
{
|
|
unsigned char answer[PW_ANSWER_MAX_SIZE];
|
|
const char* nutvalue;
|
|
int res, value;
|
|
|
|
res = command_read_sequence(PW_UPS_TOP_DATA_REQ, answer);
|
|
if (res <= 0)
|
|
fatal_with_errno(EXIT_FAILURE, "Could not communicate with the ups");
|
|
|
|
value = get_word(answer);
|
|
|
|
if ((nutvalue = nut_find_infoval(topology_info, value, TRUE)) != NULL) {
|
|
dstate_setinfo("ups.description", "%s", nutvalue);
|
|
}
|
|
}
|
|
|
|
void init_system_test_capabilities(void)
|
|
{
|
|
unsigned char answer[PW_ANSWER_MAX_SIZE], cbuf[5];
|
|
const char* nutvalue;
|
|
int res, value, i;
|
|
|
|
/* Query what system test capabilities are supported */
|
|
send_write_command(AUTHOR, 4);
|
|
|
|
sleep(PW_SLEEP); /* Need to. Have to wait at least 0,25 sec max 16 sec */
|
|
|
|
cbuf[0] = PW_INIT_SYS_TEST;
|
|
cbuf[1] = PW_SYS_TEST_REPORT_CAPABILITIES;
|
|
res = command_write_sequence(cbuf, 2, answer);
|
|
if (res <= 0) {
|
|
upslogx(LOG_ERR, "Short read from UPS");
|
|
return;
|
|
}
|
|
|
|
if((unsigned char)answer[0] != BCMXCP_RETURN_ACCEPTED) {
|
|
upsdebugx(2, "System test capabilities list not supported");
|
|
return;
|
|
}
|
|
|
|
/* Add instcmd for system test capabilities */
|
|
for(i = 3; i < res; i++) {
|
|
value = answer[i];
|
|
if ((nutvalue = nut_find_infoval(system_test_info, value, TRUE)) != NULL) {
|
|
upsdebugx(2, "Added support for instcmd %s", nutvalue);
|
|
dstate_addcmd(nutvalue);
|
|
}
|
|
}
|
|
}
|
|
|
|
void upsdrv_initinfo(void)
|
|
{
|
|
unsigned char answer[PW_ANSWER_MAX_SIZE];
|
|
char *pTmp;
|
|
char outlet_name[27];
|
|
char power_rating[10];
|
|
int iRating = 0, iIndex = 0, res, len;
|
|
int ncpu = 0, buf;
|
|
int conf_block_len = 0, alarm_block_len = 0, cmd_list_len = 0, topology_block_len = 0;
|
|
bool_t got_cmd_list = FALSE;
|
|
|
|
/* Init BCM/XCP command descriptions */
|
|
init_command_map();
|
|
|
|
/* Init BCM/XCP alarm descriptions */
|
|
init_alarm_map();
|
|
|
|
/* Get vars from ups.conf */
|
|
if (getval("shutdown_delay") != NULL)
|
|
bcmxcp_status.shutdowndelay = atoi(getval("shutdown_delay"));
|
|
else
|
|
bcmxcp_status.shutdowndelay = 120;
|
|
|
|
/* Get information on UPS from UPS ID block */
|
|
res = command_read_sequence(PW_ID_BLOCK_REQ, answer);
|
|
if (res <= 0)
|
|
fatal_with_errno(EXIT_FAILURE, "Could not communicate with the ups");
|
|
|
|
/* Get number of CPU's in ID block */
|
|
len = answer[iIndex++];
|
|
|
|
buf = len * 11;
|
|
pTmp = xmalloc(buf+1);
|
|
|
|
pTmp[0] = 0;
|
|
/* If there is one or more CPU number, get it */
|
|
if (len > 0) {
|
|
do {
|
|
if ((answer[iIndex] != 0x00) || (answer[iIndex+1] != 0x00)) {
|
|
/* Get the ups firmware. The major number is in the last byte, the minor is in the first */
|
|
snprintfcat(pTmp, buf+1, "%s%02x.%02x ", cpu_name[ncpu], answer[iIndex+1], answer[iIndex]);
|
|
}
|
|
iIndex += 2;
|
|
len--;
|
|
ncpu++;
|
|
|
|
} while ((len > 0) && (ncpu <= 5));
|
|
|
|
dstate_setinfo("ups.firmware", "%s", pTmp);
|
|
|
|
/* Increment index to point at end of CPU bytes. */
|
|
iIndex += len * 2;
|
|
}
|
|
|
|
free(pTmp);
|
|
|
|
/* Get rating in kVA, if present */
|
|
if ((iRating = answer[iIndex++]) > 0)
|
|
iRating *= 1000;
|
|
else
|
|
{
|
|
/* The rating is given as 2 byte VA */
|
|
iRating = get_word(answer+iIndex) * 50;
|
|
iIndex += 2;
|
|
}
|
|
dstate_setinfo("ups.power.nominal", "%d", iRating);
|
|
|
|
/* Get information on Phases from UPS */
|
|
nphases = (answer[iIndex++]);
|
|
dstate_setinfo("output.phases", "%d", nphases);
|
|
|
|
/* Init BCM/XCP <-> NUT meter map */
|
|
init_meter_map();
|
|
|
|
/* Skip UPS' phase angle, as NUT do not care */
|
|
iIndex += 1;
|
|
|
|
/* Set manufacturer name */
|
|
dstate_setinfo("ups.mfr", "Eaton");
|
|
|
|
/* Get length of UPS description */
|
|
len = answer[iIndex++];
|
|
|
|
/* Extract and reformat the model string */
|
|
pTmp = xmalloc(len+15);
|
|
snprintf(pTmp, len + 1, "%s", answer + iIndex);
|
|
pTmp[len+1] = 0;
|
|
iIndex += len;
|
|
/* power rating in the model name is in the form "<rating>i"
|
|
* ie "1500i", "500i", ...
|
|
* some models already includes it, so check to avoid duplication */
|
|
snprintf(power_rating, sizeof(power_rating), "%ii", iRating);
|
|
if (strstr(pTmp, power_rating) == NULL) {
|
|
snprintfcat(pTmp, len+10, " %s", power_rating);
|
|
}
|
|
dstate_setinfo("ups.model", "%s", str_rtrim(pTmp, ' '));
|
|
free(pTmp);
|
|
|
|
/* Get meter map info from ups, and init our map */
|
|
len = answer[iIndex++];
|
|
upsdebugx(2, "Length of meter map: %d\n", len);
|
|
init_ups_meter_map(answer+iIndex, len);
|
|
iIndex += len;
|
|
|
|
/* Next is alarm map */
|
|
len = answer[iIndex++];
|
|
upsdebugx(2, "Length of alarm map: %d\n", len);
|
|
init_ups_alarm_map(answer+iIndex, len);
|
|
iIndex += len;
|
|
|
|
/* Then the Config_block_length */
|
|
conf_block_len = get_word(answer+iIndex);
|
|
upsdebugx(2, "Length of Config_block: %d\n", conf_block_len);
|
|
iIndex += 2;
|
|
|
|
/* Next is statistics map */
|
|
len = answer[iIndex++];
|
|
upsdebugx(2, "Length of statistics map: %d\n", len);
|
|
/* init_statistics_map(answer+iIndex, len); */
|
|
iIndex += len;
|
|
|
|
/* Size of the alarm history log */
|
|
len = get_word(answer+iIndex);
|
|
upsdebugx(2, "Length of alarm history log: %d\n", len);
|
|
iIndex += 2;
|
|
|
|
/* Size of custom event log, always 0 according to spec */
|
|
iIndex += 2;
|
|
/* Size of topology block */
|
|
topology_block_len = get_word(answer+iIndex);
|
|
upsdebugx(2, "Length of topology block: %d\n", topology_block_len);
|
|
iIndex += 2;
|
|
|
|
/* Maximum supported command length */
|
|
len = answer[iIndex++];
|
|
upsdebugx(2, "Length of max supported command length: %d\n", len);
|
|
|
|
/* Size of command list block */
|
|
if (iIndex < res)
|
|
cmd_list_len = get_word(answer+iIndex);
|
|
upsdebugx(2, "Length of command list: %d\n", cmd_list_len);
|
|
iIndex += 2;
|
|
|
|
/* Size of outlet monitoring block */
|
|
if (iIndex < res)
|
|
outlet_block_len = get_word(answer+iIndex);
|
|
upsdebugx(2, "Length of outlet_block: %d\n", outlet_block_len);
|
|
iIndex += 2;
|
|
|
|
/* Size of the alarm block */
|
|
if (iIndex < res)
|
|
alarm_block_len = get_word(answer+iIndex);
|
|
upsdebugx(2, "Length of alarm_block: %d\n", alarm_block_len);
|
|
/* End of UPS ID block request */
|
|
|
|
/* Due to a bug in PW5115 firmware, we need to use blocklength > 8.
|
|
The protocol state that outlet block is only implemented if there is
|
|
at least 2 outlet block. 5115 has only one outlet, but has outlet block! */
|
|
if (outlet_block_len > 8) {
|
|
len = init_outlet(outlet_block_len);
|
|
|
|
for(res = 1 ; res <= len ; res++) {
|
|
snprintf(outlet_name, sizeof(outlet_name)-1, "outlet.%d.shutdown.return", res);
|
|
dstate_addcmd(outlet_name);
|
|
snprintf(outlet_name, sizeof(outlet_name)-1, "outlet.%d.load.on", res);
|
|
dstate_addcmd(outlet_name);
|
|
snprintf(outlet_name, sizeof(outlet_name)-1, "outlet.%d.load.off", res);
|
|
dstate_addcmd(outlet_name);
|
|
}
|
|
}
|
|
|
|
/* Get information on UPS configuration */
|
|
init_config();
|
|
|
|
/* Get information on UPS extended limits */
|
|
init_limit();
|
|
|
|
/* Get information on UPS commands */
|
|
if (cmd_list_len)
|
|
got_cmd_list = init_command(cmd_list_len);
|
|
/* Add default commands if we were not able to query UPS for support */
|
|
if(got_cmd_list == FALSE) {
|
|
dstate_addcmd("shutdown.return");
|
|
dstate_addcmd("shutdown.stayoff");
|
|
dstate_addcmd("test.battery.start");
|
|
}
|
|
/* Get information on UPS topology */
|
|
if (topology_block_len)
|
|
init_topology();
|
|
/* Get information on system test capabilities */
|
|
if (bcmxcp_command_map[PW_INIT_SYS_TEST].command_byte > 0) {
|
|
init_system_test_capabilities();
|
|
}
|
|
/* Get information about configurable external variables*/
|
|
init_ext_vars();
|
|
|
|
upsh.instcmd = instcmd;
|
|
upsh.setvar = setvar;
|
|
}
|
|
|
|
void upsdrv_updateinfo(void)
|
|
{
|
|
unsigned char answer[PW_ANSWER_MAX_SIZE];
|
|
unsigned char status, topology;
|
|
char sValue[128];
|
|
int iIndex, res,value;
|
|
bool_t has_ups_load = FALSE;
|
|
int batt_status = 0;
|
|
const char *nutvalue;
|
|
float calculated_load;
|
|
|
|
/* Get info from UPS */
|
|
res = command_read_sequence(PW_METER_BLOCK_REQ, answer);
|
|
|
|
if (res <= 0){
|
|
upslogx(LOG_ERR, "Short read from UPS");
|
|
dstate_datastale();
|
|
return;
|
|
}
|
|
|
|
/* Loop thru meter map, get all data UPS is willing to offer */
|
|
for (iIndex = 0; iIndex < BCMXCP_METER_MAP_MAX; iIndex++){
|
|
if (bcmxcp_meter_map[iIndex].format != 0 && bcmxcp_meter_map[iIndex].nut_entity != NULL) {
|
|
decode_meter_map_entry(answer + bcmxcp_meter_map[iIndex].meter_block_index,
|
|
bcmxcp_meter_map[iIndex].format, sValue);
|
|
|
|
/* Set result */
|
|
dstate_setinfo(bcmxcp_meter_map[iIndex].nut_entity, "%s", sValue);
|
|
|
|
/* Check if we read ups.load */
|
|
if(has_ups_load == FALSE && !strcasecmp(bcmxcp_meter_map[iIndex].nut_entity, "ups.load")) {
|
|
has_ups_load = TRUE;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Calculate ups.load if UPS does not report it directly */
|
|
if(has_ups_load == FALSE) {
|
|
calculated_load = calculate_ups_load(answer);
|
|
if(calculated_load >= 0.0f) {
|
|
dstate_setinfo("ups.load", "%5.1f", calculated_load);
|
|
}
|
|
}
|
|
|
|
/* Due to a bug in PW5115 firmware, we need to use blocklength > 8.
|
|
The protocol state that outlet block is only implemented if there is
|
|
at least 2 outlet block. 5115 has only one outlet, but has outlet block. */
|
|
if (outlet_block_len > 8) {
|
|
init_outlet(outlet_block_len);
|
|
}
|
|
|
|
/* Get alarm info from UPS */
|
|
res = command_read_sequence(PW_CUR_ALARM_REQ, answer);
|
|
if (res <= 0){
|
|
upslogx(LOG_ERR, "Short read from UPS");
|
|
dstate_datastale();
|
|
return;
|
|
}
|
|
else
|
|
{
|
|
bcmxcp_status.alarm_on_battery = 0;
|
|
bcmxcp_status.alarm_low_battery = 0;
|
|
|
|
/* Set alarms */
|
|
alarm_init();
|
|
|
|
/* Loop thru alarm map, get all alarms UPS is willing to offer */
|
|
for (iIndex = 0; iIndex < BCMXCP_ALARM_MAP_MAX; iIndex++){
|
|
if (bcmxcp_alarm_map[iIndex].alarm_block_index >= 0 && bcmxcp_alarm_map[iIndex].alarm_desc != NULL) {
|
|
if (answer[bcmxcp_alarm_map[iIndex].alarm_block_index] > 0) {
|
|
alarm_set(bcmxcp_alarm_map[iIndex].alarm_desc);
|
|
|
|
if (iIndex == BCMXCP_ALARM_UPS_ON_BATTERY) {
|
|
bcmxcp_status.alarm_on_battery = 1;
|
|
}
|
|
else if (iIndex == BCMXCP_ALARM_BATTERY_LOW) {
|
|
bcmxcp_status.alarm_low_battery = 1;
|
|
}
|
|
else if (iIndex == BCMXCP_ALARM_BATTERY_TEST_FAILED) {
|
|
bcmxcp_status.alarm_replace_battery = 1;
|
|
}
|
|
else if (iIndex == BCMXCP_ALARM_BATTERY_NEEDS_SERVICE) {
|
|
bcmxcp_status.alarm_replace_battery = 1;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Confirm alarms */
|
|
alarm_commit();
|
|
}
|
|
|
|
/* Get status info from UPS */
|
|
res = command_read_sequence(PW_STATUS_REQ, answer);
|
|
if (res <= 0)
|
|
{
|
|
upslogx(LOG_ERR, "Short read from UPS");
|
|
dstate_datastale();
|
|
return;
|
|
}
|
|
else
|
|
{
|
|
|
|
/* Get overall status */
|
|
memcpy(&status, answer, sizeof(status));
|
|
|
|
/* Get topology status bitmap, validate */
|
|
memcpy(&topology, answer+1, sizeof(topology));
|
|
topology &= bcmxcp_status.topology_mask;
|
|
|
|
/* Set status */
|
|
status_init();
|
|
|
|
switch (status) {
|
|
case BCMXCP_STATUS_ONLINE: /* On line, everything is fine */
|
|
status_set("OL");
|
|
break;
|
|
case BCMXCP_STATUS_ONBATTERY: /* Off line */
|
|
if (bcmxcp_status.alarm_on_battery == 0)
|
|
status_set("OB");
|
|
break;
|
|
case BCMXCP_STATUS_OVERLOAD: /* Overload */
|
|
status_set("OL");
|
|
status_set("OVER");
|
|
break;
|
|
case BCMXCP_STATUS_TRIM: /* Trim */
|
|
status_set("OL");
|
|
status_set("TRIM");
|
|
break;
|
|
case BCMXCP_STATUS_BOOST1:
|
|
case BCMXCP_STATUS_BOOST2: /* Boost */
|
|
status_set("OL");
|
|
status_set("BOOST");
|
|
break;
|
|
case BCMXCP_STATUS_BYPASS: /* Bypass */
|
|
status_set("OL");
|
|
status_set("BYPASS");
|
|
break;
|
|
case BCMXCP_STATUS_OFF: /* Mostly off */
|
|
status_set("OFF");
|
|
break;
|
|
default: /* Unknown, assume it is OK... */
|
|
status_set("OL");
|
|
break;
|
|
}
|
|
|
|
/* We might have to modify status based on topology status */
|
|
if ((topology & 0x20) && bcmxcp_status.alarm_low_battery == 0)
|
|
status_set("LB");
|
|
|
|
/* And finally, we might need to modify status based on alarms - the most correct way */
|
|
if (bcmxcp_status.alarm_on_battery)
|
|
status_set("OB");
|
|
if (bcmxcp_status.alarm_low_battery)
|
|
status_set("LB");
|
|
if (bcmxcp_status.alarm_replace_battery)
|
|
status_set("RB");
|
|
|
|
status_commit();
|
|
}
|
|
|
|
/* Get battery info from UPS, if exist */
|
|
res = command_read_sequence(PW_BATTERY_REQ, answer);
|
|
if (res <= 0)
|
|
{
|
|
upsdebugx(1, "Failed to read Battery Status from UPS");
|
|
}
|
|
else
|
|
{
|
|
/* Only parse the status (first byte)
|
|
* Powerware 5115 RM output:
|
|
* 02 00 78 1d 42 00 e0 17 42 1e 00 00 00 00 00 00 00 00 00 01 03
|
|
* Powerware 9130 output:
|
|
* 03 0a d7 25 42 0a d7 25 42 00 9a 19 6d 43 cd cc 4c 3e 01 00 01 03
|
|
*/
|
|
upsdebug_hex(2, "Battery Status", answer, res);
|
|
batt_status = answer[BCMXCP_BATTDATA_BLOCK_BATT_TEST_STATUS];
|
|
|
|
if ((nutvalue = nut_find_infoval(batt_test_info, batt_status, TRUE)) != NULL) {
|
|
dstate_setinfo("ups.test.result", "%s", nutvalue);
|
|
upsdebugx(2, "Battery Status = %s (%i)", nutvalue, batt_status);
|
|
}
|
|
else {
|
|
upsdebugx(1, "Failed to extract Battery Status from answer");
|
|
}
|
|
|
|
/*Extracting internal batteries ABM status*/
|
|
/*Placed first in ABM statuses list. For examples above - on position BCMXCP_BATTDATA_BLOCK_NUMBER_OF_STRINGS (18):
|
|
PW5115RM - 0 - no external strings, no status bytes,
|
|
so next byte (19) - number of ABM statuses, next (20) - first ABM Status for internal batteries.
|
|
|
|
PW9130 - 1 - one external string, so one additional status byte (#19 - 00 - no test run), next(20) - number of ABM statuses,
|
|
next (21) - ABM Status for internal batteries.
|
|
*/
|
|
value=*(answer + BCMXCP_BATTDATA_BLOCK_NUMBER_OF_STRINGS + *(answer + BCMXCP_BATTDATA_BLOCK_NUMBER_OF_STRINGS)*1+2 );
|
|
upsdebugx(2, "ABM Status = %d ",value);
|
|
if (value > 0 && value < 5)
|
|
dstate_setinfo("battery.charger.status","%s",ABMStatus[value-1]);
|
|
}
|
|
|
|
|
|
res = command_read_sequence(PW_LIMIT_BLOCK_REQ, answer);
|
|
if (res <= 0) {
|
|
upsdebugx(1, "Failed to read EXT LIMITs from UPS");
|
|
} else
|
|
{
|
|
/* Nominal input voltage */
|
|
value = get_word((answer + BCMXCP_EXT_LIMITS_BLOCK_NOMINAL_INPUT_VOLTAGE));
|
|
|
|
if (value != 0) {
|
|
dstate_setinfo("input.voltage.nominal", "%d", value);
|
|
}
|
|
|
|
/* Bypass Voltage Low Deviation Limit / Transfer to Boost Voltage */
|
|
value = get_word((answer + BCMXCP_EXT_LIMITS_BLOCK_VOLTAGE_LOW_DEV_LIMIT));
|
|
|
|
if (value != 0) {
|
|
dstate_setinfo("input.transfer.boost.high", "%d", value);
|
|
}
|
|
|
|
/* Bypass Voltage High Deviation Limit / Transfer to Buck Voltage */
|
|
value = get_word((answer + BCMXCP_EXT_LIMITS_BLOCK_VOLTAGE_HIGE_DEV_LIMIT));
|
|
|
|
if (value != 0) {
|
|
dstate_setinfo("input.transfer.trim.low", "%d", value);
|
|
}
|
|
|
|
/* Minimum Supported Input Voltage */
|
|
value = get_word((answer + BCMXCP_EXT_LIMITS_BLOCK_MIN_INPUT_VOLTAGE));
|
|
|
|
if (value != 0) {
|
|
dstate_setinfo("input.transfer.low", "%d", value);
|
|
}
|
|
|
|
/* Maximum Supported Input Voltage */
|
|
value = get_word((answer + BCMXCP_EXT_LIMITS_BLOCK_MAX_INPUT_VOLTAGE));
|
|
|
|
if (value != 0) {
|
|
dstate_setinfo("input.transfer.high", "%d", value);
|
|
}
|
|
|
|
/* Horn Status: */
|
|
value = answer[BCMXCP_EXT_LIMITS_BLOCK_HORN_STATUS];
|
|
|
|
if (value >= 0 && value <= 2) {
|
|
dstate_setinfo("ups.beeper.status", "%s", horn_stat[value]);
|
|
}
|
|
/* AAmbient Temperature Upper Alarm Limit */
|
|
value = answer[BCMXCP_EXT_LIMITS_BLOCK_AMBIENT_TEMP_HIGE];
|
|
|
|
if (value != 0) {
|
|
dstate_setinfo("ambient.temperature.high", "%d", value);
|
|
}
|
|
|
|
/*Sleep minimum load*/
|
|
value = answer[BCMXCP_EXT_LIMITS_BLOCK_SLEEP_TH_LOAD];
|
|
if (value != 0) {
|
|
dstate_setinfo("battery.energysave.load", "%d", value);
|
|
}
|
|
|
|
/* Sleep delay*/
|
|
value = answer[BCMXCP_EXT_LIMITS_BLOCK_SLEEP_DELAY];
|
|
if (value != 0) {
|
|
dstate_setinfo("battery.energysave.delay", "%d", value);
|
|
}
|
|
|
|
/* Low batt minutes warning*/
|
|
value = answer[BCMXCP_EXT_LIMITS_BLOCK_LOW_BATT_WARNING];
|
|
if (value != 0) {
|
|
dstate_setinfo("battery.runtime.low", "%d", value);
|
|
}
|
|
|
|
/* Return to mains delay */
|
|
value = get_word(answer + BCMXCP_EXT_LIMITS_BLOCK_RETURN_STAB_DELAY);
|
|
if (value != 0) {
|
|
dstate_setinfo("input.transfer.delay","%d",value);
|
|
}
|
|
|
|
/* Minimum return capacity*/
|
|
value = answer[BCMXCP_EXT_LIMITS_BLOCK_BATT_CAPACITY_RETURN];
|
|
if (value != 0) {
|
|
dstate_setinfo("battery.charge.restart","%d",value);
|
|
}
|
|
};
|
|
|
|
res = command_read_sequence(PW_CONFIG_BLOCK_REQ, answer);
|
|
if (res <= 0) {
|
|
upsdebugx(1, "Failed to read CONF BLOCK from UPS");
|
|
}
|
|
else
|
|
{
|
|
/*Nominal output voltage*/
|
|
value = get_word((answer + BCMXCP_CONFIG_BLOCK_NOMINAL_OUTPUT_VOLTAGE));
|
|
|
|
if (value != 0)
|
|
dstate_setinfo("output.voltage.nominal", "%d", value);
|
|
/*Number of EBM*/
|
|
value = (int) *(answer + BCMXCP_CONFIG_BLOCK_BATTERY_DATA_WORD3);
|
|
if (value != 0)
|
|
dstate_setinfo("battery.packs", "%d", value);
|
|
|
|
}
|
|
|
|
|
|
dstate_dataok();
|
|
}
|
|
|
|
float calculate_ups_load(const unsigned char *answer)
|
|
{
|
|
char sValue[128];
|
|
float output = 0, max_output = -FLT_MAX, fValue = -FLT_MAX;
|
|
|
|
if (bcmxcp_meter_map[BCMXCP_METER_MAP_OUTPUT_VA].format != 0 && /* Output VA */
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_OUTPUT_VA_BAR_CHART].format != 0) /* Max output VA */
|
|
{
|
|
decode_meter_map_entry(answer + bcmxcp_meter_map[BCMXCP_METER_MAP_OUTPUT_VA].meter_block_index,
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_OUTPUT_VA].format, sValue);
|
|
output = atof(sValue);
|
|
decode_meter_map_entry(answer + bcmxcp_meter_map[BCMXCP_METER_MAP_OUTPUT_VA_BAR_CHART].meter_block_index,
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_OUTPUT_VA_BAR_CHART].format, sValue);
|
|
max_output = atof(sValue);
|
|
}
|
|
else if (bcmxcp_meter_map[BCMXCP_METER_MAP_LOAD_CURRENT_PHASE_A].format != 0 && /* Output A */
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_LOAD_CURRENT_PHASE_A_BAR_CHART].format != 0) /* Max output A */
|
|
{
|
|
decode_meter_map_entry(answer + bcmxcp_meter_map[BCMXCP_METER_MAP_LOAD_CURRENT_PHASE_A].meter_block_index,
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_LOAD_CURRENT_PHASE_A].format, sValue);
|
|
output = atof(sValue);
|
|
decode_meter_map_entry(answer + bcmxcp_meter_map[BCMXCP_METER_MAP_LOAD_CURRENT_PHASE_A_BAR_CHART].meter_block_index,
|
|
bcmxcp_meter_map[BCMXCP_METER_MAP_LOAD_CURRENT_PHASE_A_BAR_CHART].format, sValue);
|
|
max_output = atof(sValue);
|
|
}
|
|
if (max_output > 0.0)
|
|
fValue = 100 * (output / max_output);
|
|
|
|
return fValue;
|
|
}
|
|
|
|
void upsdrv_shutdown(void)
|
|
{
|
|
upsdebugx(1, "upsdrv_shutdown...");
|
|
|
|
/* Try to shutdown with delay */
|
|
if (instcmd("shutdown.return", NULL) == STAT_INSTCMD_HANDLED) {
|
|
/* Shutdown successful */
|
|
return;
|
|
}
|
|
|
|
/* If the above doesn't work, try shutdown.stayoff */
|
|
if (instcmd("shutdown.stayoff", NULL) == STAT_INSTCMD_HANDLED) {
|
|
/* Shutdown successful */
|
|
return;
|
|
}
|
|
|
|
fatalx(EXIT_FAILURE, "Shutdown failed!");
|
|
}
|
|
|
|
|
|
static int instcmd(const char *cmdname, const char *extra)
|
|
{
|
|
unsigned char answer[128], cbuf[6];
|
|
char success_msg[40];
|
|
char namebuf[MAX_NUT_NAME_LENGTH];
|
|
char varname[32];
|
|
const char *varvalue = NULL;
|
|
int res, sec, outlet_num;
|
|
int sddelay = 0x03; /* outlet off in 3 seconds, by default */
|
|
|
|
upsdebugx(1, "entering instcmd(%s)", cmdname);
|
|
|
|
if (!strcasecmp(cmdname, "shutdown.return")) {
|
|
send_write_command(AUTHOR, 4);
|
|
|
|
sleep(PW_SLEEP); /* Need to. Have to wait at least 0,25 sec max 16 sec */
|
|
|
|
cbuf[0] = PW_LOAD_OFF_RESTART;
|
|
cbuf[1] = (unsigned char)(bcmxcp_status.shutdowndelay & 0x00ff); /* "delay" sec delay for shutdown, */
|
|
cbuf[2] = (unsigned char)(bcmxcp_status.shutdowndelay >> 8); /* high byte sec. From ups.conf. */
|
|
|
|
res = command_write_sequence(cbuf, 3, answer);
|
|
|
|
sec = (256 * (unsigned char)answer[3]) + (unsigned char)answer[2];
|
|
snprintf(success_msg, sizeof(success_msg)-1, "Going down in %d sec", sec);
|
|
|
|
return decode_instcmd_exec(res, (unsigned char)answer[0], cmdname, success_msg);
|
|
}
|
|
|
|
if (!strcasecmp(cmdname, "shutdown.stayoff")) {
|
|
send_write_command(AUTHOR, 4);
|
|
|
|
sleep(PW_SLEEP); /* Need to. Have to wait at least 0,25 sec max 16 sec */
|
|
|
|
res = command_read_sequence(PW_UPS_OFF, answer);
|
|
|
|
return decode_instcmd_exec(res, (unsigned char)answer[0], cmdname, "Going down NOW");
|
|
}
|
|
|
|
if (!strcasecmp(cmdname, "load.on")) {
|
|
send_write_command(AUTHOR, 4);
|
|
|
|
sleep(PW_SLEEP); /* Need to. Have to wait at least 0,25 sec max 16 sec */
|
|
|
|
res = command_read_sequence(PW_UPS_ON, answer);
|
|
|
|
return decode_instcmd_exec(res, (unsigned char)answer[0], cmdname, "Enabling");
|
|
}
|
|
|
|
if (!strcasecmp(cmdname, "bypass.start")) {
|
|
send_write_command(AUTHOR, 4);
|
|
|
|
sleep(PW_SLEEP); /* Need to. Have to wait at least 0,25 sec max 16 sec */
|
|
|
|
res = command_read_sequence(PW_GO_TO_BYPASS, answer);
|
|
|
|
return decode_instcmd_exec(res, (unsigned char)answer[0], cmdname, "Bypass enabled");
|
|
}
|
|
|
|
/* Note: test result will be parsed from Battery status block,
|
|
* part of the update loop, and published into ups.test.result
|
|
*/
|
|
if (!strcasecmp(cmdname, "test.battery.start")) {
|
|
send_write_command(AUTHOR, 4);
|
|
|
|
sleep(PW_SLEEP); /* Need to. Have to wait at least 0,25 sec max 16 sec */
|
|
|
|
cbuf[0] = PW_INIT_BAT_TEST;
|
|
cbuf[1] = 0x0A; /* 10 sec start delay for test.*/
|
|
cbuf[2] = 0x1E; /* 30 sec test duration.*/
|
|
|
|
res = command_write_sequence(cbuf, 3, answer);
|
|
|
|
return decode_instcmd_exec(res, (unsigned char)answer[0], cmdname, "Testing battery now");
|
|
/* Get test info from UPS ?
|
|
Should we wait for 50 sec and get the
|
|
answer from the test.
|
|
Or return, as we may lose line power
|
|
and need to do a shutdown.*/
|
|
}
|
|
|
|
if (!strcasecmp(cmdname, "test.system.start")) {
|
|
send_write_command(AUTHOR, 4);
|
|
|
|
sleep(PW_SLEEP); /* Need to. Have to wait at least 0,25 sec max 16 sec */
|
|
|
|
cbuf[0] = PW_INIT_SYS_TEST;
|
|
cbuf[1] = PW_SYS_TEST_GENERAL;
|
|
res = command_write_sequence(cbuf, 2, answer);
|
|
|
|
return decode_instcmd_exec(res, (unsigned char)answer[0], cmdname, "Testing system now");
|
|
}
|
|
|
|
if (!strcasecmp(cmdname, "test.panel.start")) {
|
|
send_write_command(AUTHOR, 4);
|
|
|
|
sleep(PW_SLEEP); /* Need to. Have to wait at least 0,25 sec max 16 sec */
|
|
|
|
cbuf[0] = PW_INIT_SYS_TEST;
|
|
cbuf[1] = PW_SYS_TEST_FLASH_LIGHTS;
|
|
cbuf[2] = 0x0A; /* Flash and beep 10 times */
|
|
res = command_write_sequence(cbuf, 3, answer);
|
|
|
|
return decode_instcmd_exec(res, (unsigned char)answer[0], cmdname, "Testing panel now");
|
|
}
|
|
|
|
if (!strcasecmp(cmdname, "beeper.disable") || !strcasecmp(cmdname, "beeper.enable") || !strcasecmp(cmdname, "beeper.mute")) {
|
|
send_write_command(AUTHOR, 4);
|
|
|
|
sleep(PW_SLEEP); /* Need to. Have to wait at least 0,25 sec max 16 sec */
|
|
|
|
cbuf[0] = PW_SET_CONF_COMMAND;
|
|
cbuf[1] = PW_CONF_BEEPER;
|
|
switch (cmdname[7]){
|
|
|
|
case 'd':
|
|
case 'D': {
|
|
cbuf[2] = 0x0; /*disable beeper*/
|
|
break;
|
|
}
|
|
case 'e':
|
|
case 'E': {
|
|
cbuf[2] = 0x1; /*enable beeper*/
|
|
break;
|
|
}
|
|
case 'm':
|
|
case 'M': {
|
|
cbuf[2] = 0x2;
|
|
break; /*mute beeper*/
|
|
}
|
|
}
|
|
cbuf[3] = 0x0; /*padding*/
|
|
|
|
res = command_write_sequence(cbuf, 4, answer);
|
|
return decode_instcmd_exec(res, (unsigned char)answer[0], cmdname, "Beeper status changed");
|
|
}
|
|
|
|
strncpy(namebuf, cmdname, sizeof(namebuf));
|
|
namebuf[NUT_OUTLET_POSITION] = 'n'; /* Assumes a maximum of 9 outlets */
|
|
|
|
if (!strcasecmp(namebuf, "outlet.n.shutdown.return")) {
|
|
send_write_command(AUTHOR, 4);
|
|
|
|
sleep(PW_SLEEP); /* Need to. Have to wait at least 0,25 sec max 16 sec */
|
|
|
|
/* Get the shutdown delay, if any */
|
|
snprintf(varname, sizeof(varname)-1, "outlet.%c.delay.shutdown", cmdname[NUT_OUTLET_POSITION]);
|
|
if ((varvalue = dstate_getinfo(varname)) != NULL) {
|
|
sddelay = atoi(varvalue);
|
|
}
|
|
|
|
/*if -1 then use global shutdown_delay from ups.conf*/
|
|
if (sddelay == -1) sddelay=bcmxcp_status.shutdowndelay;
|
|
|
|
outlet_num = cmdname[NUT_OUTLET_POSITION] - '0';
|
|
if (outlet_num < 1 || outlet_num > 9)
|
|
return STAT_INSTCMD_FAILED;
|
|
|
|
cbuf[0] = PW_LOAD_OFF_RESTART;
|
|
cbuf[1] = sddelay & 0xff;
|
|
cbuf[2] = sddelay >> 8; /* high byte of the 2 byte time argument */
|
|
cbuf[3] = outlet_num; /* which outlet load segment? Assumes outlet number at position 8 of the command string. */
|
|
|
|
res = command_write_sequence(cbuf, 4, answer);
|
|
|
|
sec = (256 * (unsigned char)answer[3]) + (unsigned char)answer[2];
|
|
snprintf(success_msg, sizeof(success_msg)-1, "Going down in %d sec", sec);
|
|
|
|
return decode_instcmd_exec(res, (unsigned char)answer[0], cmdname, success_msg);
|
|
}
|
|
|
|
if (!strcasecmp(namebuf,"outlet.n.load.on") || !strcasecmp(namebuf,"outlet.n.load.off")){
|
|
send_write_command(AUTHOR, 4);
|
|
|
|
sleep(PW_SLEEP); /* Need to. Have to wait at least 0,25 sec max 16 sec */
|
|
|
|
outlet_num = cmdname[NUT_OUTLET_POSITION] - '0';
|
|
if (outlet_num < 1 || outlet_num > 9)
|
|
return STAT_INSTCMD_FAILED;
|
|
|
|
|
|
cbuf[0] = (cmdname[NUT_OUTLET_POSITION+8] == 'n')?PW_UPS_ON:PW_UPS_OFF; /* Cmd oN or not*/
|
|
cbuf[1] = outlet_num; /* Outlet number */
|
|
|
|
res = command_write_sequence(cbuf, 2, answer);
|
|
snprintf(success_msg, sizeof(success_msg)-1, "Outlet %d is %s",outlet_num, (cmdname[NUT_OUTLET_POSITION+8] == 'n')?"On":"Off");
|
|
|
|
return decode_instcmd_exec(res, (unsigned char)answer[0], cmdname, success_msg);
|
|
|
|
|
|
|
|
}
|
|
|
|
upslogx(LOG_NOTICE, "instcmd: unknown command [%s]", cmdname);
|
|
return STAT_INSTCMD_UNKNOWN;
|
|
}
|
|
|
|
static int decode_instcmd_exec(const int res, const unsigned char exec_status, const char *cmdname, const char *success_msg)
|
|
{
|
|
if (res <= 0) {
|
|
upslogx(LOG_ERR, "[%s] Short read from UPS", cmdname);
|
|
dstate_datastale();
|
|
return STAT_INSTCMD_FAILED;
|
|
}
|
|
|
|
/* Decode the status code from command execution */
|
|
switch (exec_status) {
|
|
case BCMXCP_RETURN_ACCEPTED: {
|
|
upslogx(LOG_NOTICE, "[%s] %s", cmdname, success_msg);
|
|
upsdrv_comm_good();
|
|
return STAT_INSTCMD_HANDLED;
|
|
break;
|
|
}
|
|
case BCMXCP_RETURN_ACCEPTED_PARAMETER_ADJUST: {
|
|
upslogx(LOG_NOTICE, "[%s] Parameter adjusted", cmdname);
|
|
upslogx(LOG_NOTICE, "[%s] %s", cmdname, success_msg);
|
|
upsdrv_comm_good();
|
|
return STAT_INSTCMD_HANDLED;
|
|
break;
|
|
}
|
|
case BCMXCP_RETURN_BUSY: {
|
|
upslogx(LOG_NOTICE, "[%s] Busy or disbled by front panel", cmdname);
|
|
return STAT_INSTCMD_FAILED;
|
|
break;
|
|
}
|
|
case BCMXCP_RETURN_UNRECOGNISED: {
|
|
upslogx(LOG_NOTICE, "[%s] Unrecognised command byte or corrupt checksum", cmdname);
|
|
return STAT_INSTCMD_FAILED;
|
|
break;
|
|
}
|
|
case BCMXCP_RETURN_INVALID_PARAMETER: {
|
|
upslogx(LOG_NOTICE, "[%s] Invalid parameter", cmdname);
|
|
return STAT_INSTCMD_INVALID;
|
|
break;
|
|
}
|
|
case BCMXCP_RETURN_PARAMETER_OUT_OF_RANGE: {
|
|
upslogx(LOG_NOTICE, "[%s] Parameter out of range", cmdname);
|
|
return STAT_INSTCMD_INVALID;
|
|
break;
|
|
}
|
|
default: {
|
|
upslogx(LOG_NOTICE, "[%s] Not supported", cmdname);
|
|
return STAT_INSTCMD_INVALID;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
void upsdrv_help(void)
|
|
{
|
|
}
|
|
|
|
/* list flags and values that you want to receive via -x */
|
|
void upsdrv_makevartable(void)
|
|
{
|
|
addvar(VAR_VALUE, "shutdown_delay", "Specify shutdown delay (seconds)");
|
|
addvar(VAR_VALUE, "baud_rate", "Specify communication speed (ex: 9600)");
|
|
}
|
|
|
|
int setvar (const char *varname, const char *val)
|
|
{
|
|
unsigned char answer[128], cbuf[5];
|
|
char namebuf[MAX_NUT_NAME_LENGTH];
|
|
char success_msg[50];
|
|
int res, sec, outlet_num,tmp;
|
|
int onOff_setting = PW_AUTO_OFF_DELAY;
|
|
|
|
upsdebugx(1, "entering setvar(%s, %s)", varname, val);
|
|
|
|
if (!strcasecmp(varname, "input.transfer.boost.high")) {
|
|
|
|
send_write_command(AUTHOR, 4);
|
|
sleep(PW_SLEEP); /* Need to. Have to wait at least 0,25 sec max 16 sec */
|
|
|
|
tmp=atoi(val);
|
|
if (tmp < 0 || tmp > 460) {
|
|
return STAT_SET_INVALID;
|
|
}
|
|
|
|
cbuf[0]=PW_SET_CONF_COMMAND;
|
|
cbuf[1]=PW_CONF_LOW_DEV_LIMIT;
|
|
cbuf[2]=tmp&0xff;
|
|
cbuf[3]=tmp>>8;
|
|
|
|
res = command_write_sequence(cbuf, 4, answer);
|
|
snprintf(success_msg, sizeof(success_msg)-1, " BOOST threshold volage set to %d V", tmp);
|
|
|
|
return decode_setvar_exec(res, (unsigned char)answer[0], varname, success_msg);
|
|
|
|
|
|
}
|
|
|
|
if (!strcasecmp(varname, "input.transfer.trim.low")) {
|
|
|
|
send_write_command(AUTHOR, 4);
|
|
sleep(PW_SLEEP); /* Need to. Have to wait at least 0,25 sec max 16 sec */
|
|
|
|
tmp=atoi(val);
|
|
if (tmp < 110 || tmp > 540) {
|
|
return STAT_SET_INVALID;
|
|
}
|
|
|
|
cbuf[0]=PW_SET_CONF_COMMAND;
|
|
cbuf[1]=PW_CONF_HIGH_DEV_LIMIT;
|
|
cbuf[2]=tmp&0xff;
|
|
cbuf[3]=tmp>>8;
|
|
|
|
res = command_write_sequence(cbuf, 4, answer);
|
|
snprintf(success_msg, sizeof(success_msg)-1, " TRIM threshold volage set to %d V", tmp);
|
|
|
|
return decode_setvar_exec(res, (unsigned char)answer[0], varname, success_msg);
|
|
|
|
}
|
|
|
|
if (!strcasecmp(varname, "battery.runtime.low")) {
|
|
|
|
send_write_command(AUTHOR, 4);
|
|
sleep(PW_SLEEP); /* Need to. Have to wait at least 0,25 sec max 16 sec */
|
|
|
|
tmp=atoi(val);
|
|
if (tmp < 0 || tmp > 30) {
|
|
return STAT_SET_INVALID;
|
|
}
|
|
|
|
cbuf[0]=PW_SET_CONF_COMMAND;
|
|
cbuf[1]=PW_CONF_LOW_BATT;
|
|
cbuf[2]=tmp;
|
|
cbuf[3]=0x0;
|
|
|
|
res = command_write_sequence(cbuf, 4, answer);
|
|
snprintf(success_msg, sizeof(success_msg)-1, " Low battery warning time set to %d min", tmp);
|
|
|
|
return decode_setvar_exec(res, (unsigned char)answer[0], varname, success_msg);
|
|
|
|
}
|
|
|
|
if (!strcasecmp(varname, "input.transfer.delay")) {
|
|
|
|
send_write_command(AUTHOR, 4);
|
|
sleep(PW_SLEEP); /* Need to. Have to wait at least 0,25 sec max 16 sec */
|
|
|
|
tmp=atoi(val);
|
|
if (tmp < 1 || tmp > 18000 ) {
|
|
return STAT_SET_INVALID;
|
|
}
|
|
|
|
cbuf[0]=PW_SET_CONF_COMMAND;
|
|
cbuf[1]=PW_CONF_RETURN_DELAY;
|
|
cbuf[2]=tmp&0xff;
|
|
cbuf[3]=tmp>>8;
|
|
|
|
res = command_write_sequence(cbuf, 4, answer);
|
|
snprintf(success_msg, sizeof(success_msg)-1, " Mains return delay set to %d sec", tmp);
|
|
|
|
return decode_setvar_exec(res, (unsigned char)answer[0], varname, success_msg);
|
|
|
|
}
|
|
|
|
if (!strcasecmp(varname, "battery.charge.restart")) {
|
|
|
|
send_write_command(AUTHOR, 4);
|
|
sleep(PW_SLEEP); /* Need to. Have to wait at least 0,25 sec max 16 sec */
|
|
|
|
tmp=atoi(val);
|
|
if (tmp < 0 || tmp > 100 ) {
|
|
return STAT_SET_INVALID;
|
|
}
|
|
|
|
cbuf[0]=PW_SET_CONF_COMMAND;
|
|
cbuf[1]=PW_CONF_RETURN_CAP;
|
|
cbuf[2]=tmp&0xff;
|
|
cbuf[3]=0x0;
|
|
|
|
res = command_write_sequence(cbuf, 4, answer);
|
|
snprintf(success_msg, sizeof(success_msg)-1, " Mains return minimum battery capacity set to %d %%", tmp);
|
|
|
|
return decode_setvar_exec(res, (unsigned char)answer[0], varname, success_msg);
|
|
|
|
}
|
|
|
|
|
|
if (!strcasecmp(varname, "ambient.temperature.high")) {
|
|
|
|
send_write_command(AUTHOR, 4);
|
|
sleep(PW_SLEEP); /* Need to. Have to wait at least 0,25 sec max 16 sec */
|
|
|
|
tmp=atoi(val);
|
|
if (tmp < 0 || tmp > 100 ) {
|
|
return STAT_SET_INVALID;
|
|
}
|
|
|
|
cbuf[0]=PW_SET_CONF_COMMAND;
|
|
cbuf[1]=PW_CONF_MAX_TEMP;
|
|
cbuf[2]=tmp&0xff;
|
|
cbuf[3]=0x0;
|
|
|
|
res = command_write_sequence(cbuf, 4, answer);
|
|
snprintf(success_msg, sizeof(success_msg)-1, " Maximum temperature set to %d C", tmp);
|
|
|
|
return decode_setvar_exec(res, (unsigned char)answer[0], varname, success_msg);
|
|
|
|
}
|
|
|
|
if (!strcasecmp(varname, "output.voltage.nominal")) {
|
|
|
|
send_write_command(AUTHOR, 4);
|
|
sleep(PW_SLEEP); /* Need to. Have to wait at least 0,25 sec max 16 sec */
|
|
|
|
tmp=atoi(val);
|
|
if (tmp < 0 || tmp > 460) {
|
|
return STAT_SET_INVALID;
|
|
}
|
|
|
|
cbuf[0]=PW_SET_CONF_COMMAND;
|
|
cbuf[1]=PW_CONF_NOMINAL_OUT_VOLTAGE;
|
|
cbuf[2]=tmp&0xff;
|
|
cbuf[3]=tmp>>8;
|
|
|
|
res = command_write_sequence(cbuf, 4, answer);
|
|
snprintf(success_msg, sizeof(success_msg)-1, " Nominal output voltage set to %d V", tmp);
|
|
|
|
return decode_setvar_exec(res, (unsigned char)answer[0], varname, success_msg);
|
|
|
|
}
|
|
|
|
if (!strcasecmp(varname, "battery.energysave.load")) {
|
|
|
|
send_write_command(AUTHOR, 4);
|
|
sleep(PW_SLEEP); /* Need to. Have to wait at least 0,25 sec max 16 sec */
|
|
|
|
tmp=atoi(val);
|
|
if (tmp < 0 || tmp > 100) {
|
|
return STAT_SET_INVALID;
|
|
}
|
|
|
|
cbuf[0]=PW_SET_CONF_COMMAND;
|
|
cbuf[1]=PW_CONF_SLEEP_TH_LOAD;
|
|
cbuf[2]=tmp&0xff;
|
|
cbuf[3]=0x0;
|
|
|
|
res = command_write_sequence(cbuf, 4, answer);
|
|
snprintf(success_msg, sizeof(success_msg)-1, " Minimum load before sleep countdown set to %d %%", tmp);
|
|
|
|
return decode_setvar_exec(res, (unsigned char)answer[0], varname, success_msg);
|
|
|
|
|
|
}
|
|
|
|
|
|
if (!strcasecmp(varname, "battery.energysave.delay")) {
|
|
|
|
send_write_command(AUTHOR, 4);
|
|
sleep(PW_SLEEP); /* Need to. Have to wait at least 0,25 sec max 16 sec */
|
|
|
|
tmp=atoi(val);
|
|
if (tmp < 0 || tmp > 255) {
|
|
return STAT_SET_INVALID;
|
|
}
|
|
|
|
cbuf[0]=PW_SET_CONF_COMMAND;
|
|
cbuf[1]=PW_CONF_SLEEP_DELAY;
|
|
cbuf[2]=tmp&0xff;
|
|
cbuf[3]=0x0;
|
|
|
|
res = command_write_sequence(cbuf, 4, answer);
|
|
snprintf(success_msg, sizeof(success_msg)-1, " Delay before sleep shutdown set to %d min", tmp);
|
|
|
|
return decode_setvar_exec(res, (unsigned char)answer[0], varname, success_msg);
|
|
|
|
|
|
}
|
|
|
|
if (!strcasecmp(varname, "battery.packs")) {
|
|
|
|
send_write_command(AUTHOR, 4);
|
|
sleep(PW_SLEEP); /* Need to. Have to wait at least 0,25 sec max 16 sec */
|
|
|
|
tmp=atoi(val);
|
|
if (tmp < 0 || tmp > 5) {
|
|
return STAT_SET_INVALID;
|
|
}
|
|
|
|
cbuf[0]=PW_SET_CONF_COMMAND;
|
|
cbuf[1]=PW_CONF_BATT_STRINGS;
|
|
cbuf[2]=tmp;
|
|
cbuf[3]=0x0;
|
|
|
|
res = command_write_sequence(cbuf, 4, answer);
|
|
snprintf(success_msg, sizeof(success_msg)-1, "EBM Count set to %d ", tmp);
|
|
|
|
return decode_setvar_exec(res, (unsigned char)answer[0], varname, success_msg);
|
|
|
|
|
|
}
|
|
|
|
strncpy(namebuf, varname, sizeof(namebuf));
|
|
namebuf[NUT_OUTLET_POSITION] = 'n'; /* Assumes a maximum of 9 outlets */
|
|
|
|
if ( (!strcasecmp(namebuf, "outlet.n.delay.start")) ||
|
|
(!strcasecmp(namebuf, "outlet.n.delay.shutdown")) ) {
|
|
|
|
|
|
if (outlet_block_len <= 8) {
|
|
return STAT_SET_INVALID;
|
|
}
|
|
|
|
if (!strcasecmp(namebuf, "outlet.n.delay.start")) {
|
|
onOff_setting = PW_AUTO_ON_DELAY;
|
|
}
|
|
|
|
send_write_command(AUTHOR, 4);
|
|
sleep(PW_SLEEP); /* Need to. Have to wait at least 0,25 sec max 16 sec */
|
|
|
|
outlet_num = varname[NUT_OUTLET_POSITION] - '0';
|
|
if (outlet_num < 1 || outlet_num > 9) {
|
|
return STAT_SET_INVALID;
|
|
}
|
|
|
|
sec = atoi(val);
|
|
/* Check value:
|
|
* 0-32767 are valid values
|
|
* -1 means no Automatic off or restart
|
|
* for Auto Off Delay:
|
|
* 0-30 are valid but ill-advised */
|
|
if (sec < -1 || sec > 0x7FFF) {
|
|
return STAT_SET_INVALID;
|
|
}
|
|
|
|
cbuf[0] = PW_SET_OUTLET_COMMAND; /* Cmd */
|
|
cbuf[1] = onOff_setting; /* Set Auto Off (1) or On (2) Delay */
|
|
cbuf[2] = outlet_num; /* Outlet number */
|
|
cbuf[3] = sec&0xff; /* Delay in seconds LSB */
|
|
cbuf[4] = sec>>8; /* Delay in seconds MSB */
|
|
|
|
res = command_write_sequence(cbuf, 5, answer);
|
|
snprintf(success_msg, sizeof(success_msg)-1, "Outlet %d %s delay set to %d sec",
|
|
outlet_num, (onOff_setting == PW_AUTO_ON_DELAY)?"start":"shutdown", sec);
|
|
|
|
return decode_setvar_exec(res, (unsigned char)answer[0], varname, success_msg);
|
|
|
|
}
|
|
|
|
return STAT_SET_INVALID;
|
|
}
|
|
|
|
static int decode_setvar_exec(const int res, const unsigned char exec_status, const char *cmdname, const char *success_msg)
|
|
{
|
|
if (res <= 0) {
|
|
upslogx(LOG_ERR, "[%s] Short read from UPS", cmdname);
|
|
dstate_datastale();
|
|
return STAT_SET_FAILED;
|
|
}
|
|
|
|
/* Decode the status code from command execution */
|
|
switch (exec_status) {
|
|
case BCMXCP_RETURN_ACCEPTED: {
|
|
upslogx(LOG_NOTICE, "[%s] %s", cmdname, success_msg);
|
|
upsdrv_comm_good();
|
|
return STAT_SET_HANDLED;
|
|
break;
|
|
}
|
|
case BCMXCP_RETURN_ACCEPTED_PARAMETER_ADJUST: {
|
|
upslogx(LOG_NOTICE, "[%s] Parameter adjusted", cmdname);
|
|
upslogx(LOG_NOTICE, "[%s] %s", cmdname, success_msg);
|
|
upsdrv_comm_good();
|
|
return STAT_SET_HANDLED;
|
|
break;
|
|
}
|
|
case BCMXCP_RETURN_BUSY: {
|
|
upslogx(LOG_NOTICE, "[%s] Busy or disbled by front panel", cmdname);
|
|
return STAT_SET_FAILED;
|
|
break;
|
|
}
|
|
case BCMXCP_RETURN_UNRECOGNISED: {
|
|
upslogx(LOG_NOTICE, "[%s] Unrecognised command byte or corrupt checksum", cmdname);
|
|
return STAT_SET_FAILED;
|
|
break;
|
|
}
|
|
case BCMXCP_RETURN_INVALID_PARAMETER: {
|
|
upslogx(LOG_NOTICE, "[%s] Invalid parameter", cmdname);
|
|
return STAT_SET_INVALID;
|
|
break;
|
|
}
|
|
case BCMXCP_RETURN_PARAMETER_OUT_OF_RANGE: {
|
|
upslogx(LOG_NOTICE, "[%s] Parameter out of range", cmdname);
|
|
return STAT_SET_INVALID;
|
|
break;
|
|
}
|
|
default: {
|
|
upslogx(LOG_NOTICE, "[%s] Not supported", cmdname);
|
|
return STAT_SET_INVALID;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*******************************
|
|
* Extracted from usbhid-ups.c *
|
|
*******************************/
|
|
|
|
/* find the NUT value matching that XCP Item value */
|
|
static const char *nut_find_infoval(info_lkp_t *xcp2info, const double value, const bool_t debug_output_nonexisting)
|
|
{
|
|
info_lkp_t *info_lkp;
|
|
|
|
/* if a conversion function is defined, use 'value' as argument for it */
|
|
if (xcp2info->fun != NULL) {
|
|
return xcp2info->fun(value);
|
|
}
|
|
|
|
/* use 'value' as an index for a lookup in an array */
|
|
for (info_lkp = xcp2info; info_lkp->nut_value != NULL; info_lkp++) {
|
|
if (info_lkp->xcp_value == (long)value) {
|
|
upsdebugx(5, "nut_find_infoval: found %s (value: %ld)", info_lkp->nut_value, (long)value);
|
|
return info_lkp->nut_value;
|
|
}
|
|
}
|
|
if(debug_output_nonexisting == TRUE) {
|
|
upsdebugx(3, "nut_find_infoval: no matching INFO_* value for this XCP value (%g)", value);
|
|
}
|
|
return NULL;
|
|
}
|