111 lines
2.3 KiB
Text
111 lines
2.3 KiB
Text
ADELSYSTEM_CBI(8)
|
|
=================
|
|
|
|
NAME
|
|
----
|
|
|
|
adelsystem_cbi - Driver for the ADELSYSTEM CB/CBI DC-UPS
|
|
|
|
SYNOPSIS
|
|
--------
|
|
|
|
*adelsystem_cbi* -h
|
|
|
|
*adelsystem_cbi* -a 'DEVICE_NAME' ['OPTIONS']
|
|
|
|
NOTE: This man page only documents the specific features of the *adelsystem_cbi*
|
|
driver. For information about the core driver, see linkman:nutupsdrv[8].
|
|
|
|
SUPPORTED HARDWARE
|
|
------------------
|
|
|
|
This is the driver for the adelsystem cb/cbi dc-ups devices.
|
|
|
|
The driver has been tested against CBI2801224A, all in one 12/24Vdc DC-UPS.
|
|
|
|
More information about this UPS can be found here: ::
|
|
https://www.adelsystem.com/en/products/dc-ups-/
|
|
|
|
|
|
EXTRA ARGUMENTS
|
|
---------------
|
|
|
|
This driver supports the following optional settings in the
|
|
linkman:ups.conf[5] file:
|
|
|
|
Serial:
|
|
~~~~~~
|
|
|
|
*ser_baud_rate*='value'::
|
|
A integer specifying the serial port baud rate (default 9600).
|
|
|
|
*ser_data_bit*='value'::
|
|
A integer specifying the serial port data bit (default 8).
|
|
|
|
*ser_parity*='value'::
|
|
A character specifying the serial port parity (default N).
|
|
|
|
*ser_stop_bit*='value'::
|
|
An integer specifying the serial port stop bit (default 1).
|
|
|
|
Modbus:
|
|
~~~~~~
|
|
|
|
*dev_slave_id*='value'::
|
|
An integer specifying the device modbus slave ID (default 1).
|
|
|
|
|
|
CONFIGURATION
|
|
-------------
|
|
|
|
Here is an example of adelsystem_cbi driver configuration in *ups.conf* file:
|
|
----
|
|
[adelsystem_cbi]
|
|
driver = adelsystem_cbi
|
|
port = /dev/ttyUSB0
|
|
desc = "adelsystem cb/cbi ups driver"
|
|
# serial settings
|
|
ser_baud_rate = 9600
|
|
ser_parity = N
|
|
ser_data_bit = 8
|
|
ser_stop_bit = 1
|
|
# modbus slave id
|
|
dev_slave_id = 5
|
|
----
|
|
|
|
INSTANT COMMANDS
|
|
----------------
|
|
|
|
This driver support the following instant commands:
|
|
|
|
load.off::
|
|
executes "instant poweroff"
|
|
|
|
INSTALLATION
|
|
------------
|
|
|
|
This driver is not built by default. You can build it by installing
|
|
libmodbus and running `configure --with-modbus=yes`.
|
|
|
|
You also need to give proper permissions on the local serial device
|
|
file (/dev/ttyUSB0 for example) to allow the run-time NUT driver user
|
|
account to access it.
|
|
|
|
AUTHOR
|
|
------
|
|
|
|
Dimitris Economou <dimitris.s.economou@gmail.com>
|
|
|
|
SEE ALSO
|
|
--------
|
|
|
|
The core driver:
|
|
~~~~~~~~~~~~~~~~
|
|
|
|
linkman:nutupsdrv[8], linkman:ups.conf[5]
|
|
|
|
Internet resources:
|
|
~~~~~~~~~~~~~~~~~~~
|
|
|
|
* The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
|
|
* libmodbus home page: http://libmodbus.org
|