107 lines
3.6 KiB
Groff
107 lines
3.6 KiB
Groff
.TH CLONE 8 "Mon Jul 20 2009" "" "Network UPS Tools (NUT)"
|
|
.SH NAME
|
|
clone \- UPS driver clone
|
|
|
|
.SH NOTE
|
|
This man page only documents the specific features of the
|
|
clone driver. For information about the core driver, see
|
|
\fBnutupsdrv\fR(8).
|
|
|
|
.SH DESCRIPTION
|
|
This driver, which sits on top of another driver socket, allows to group
|
|
clients to a particular outlet of a device and deal with this output as
|
|
if it was a normal UPS.
|
|
|
|
.SH EXTRA ARGUMENTS
|
|
This driver supports the following settings:
|
|
|
|
.IP "load.off=\fIcommand\fR"
|
|
Recommended. Set the command on the 'real' UPS driver that will be used to
|
|
switch off the outlet. You need both \fIload.off\fR and \fIload.on\fR in
|
|
order to power cycle the outlet. Otherwise, shutting down the clients
|
|
powered by an outlet is a one way street (see \fBIMPORTANT\fR).
|
|
|
|
.IP "load.on=\fIcommand\fR"
|
|
Recommended. Set the command on the 'real' UPS driver that will be used to
|
|
switch on the outlet. You need both \fIload.off\fR and \fIload.on\fR in
|
|
order to power cycle the outlet. Otherwise, shutting down the clients
|
|
powered by an outlet is a one way street (see \fBIMPORTANT\fR).
|
|
|
|
.IP "load.status=\fIvalue\fR"
|
|
Recommended. Set the variable on the 'real' UPS driver that will be used
|
|
to indicate the outlet status (ie on/off). If not specified, the clone
|
|
driver will attempt to keep track of the outlet status, but this is less
|
|
reliable.
|
|
|
|
.IP "offdelay=\fInum\fR"
|
|
Set the timer (in seconds) before the outlet is turned off after the
|
|
shutdown condition (OB LB) for this outlet is met or a command to shutdown
|
|
was issued. Defaults to 120 seconds.
|
|
|
|
.IP "ondelay=\fInum\fR"
|
|
Set the timer (in seconds) for the outlet to switch on in case the power
|
|
returns after the oulet has been switched off. Defaults to 30 seconds.
|
|
|
|
.IP "mincharge=\fIvalue\fR"
|
|
Set the remaining battery level when the clone UPS switches to LB
|
|
(percent).
|
|
|
|
.IP "minruntime=\fIvalue\fR"
|
|
Set the remaining battery runtime when the clone UPS switches to LB
|
|
(seconds).
|
|
|
|
.SH IMPLEMENTATION
|
|
The port specification in the \fBups.conf\fR(5) reference the driver
|
|
socket that the 'real' UPS driver is using. For example:
|
|
|
|
.nf
|
|
[realups]
|
|
driver = usbhid-ups
|
|
port = auto
|
|
.fi
|
|
|
|
.nf
|
|
[clone-outlet-1]
|
|
driver = clone
|
|
port = usbhid-ups-realups
|
|
load.on = outlet.1.load.on
|
|
load.off = outlet.1.load.off
|
|
load.status = outlet.1.status
|
|
[...]
|
|
.fi
|
|
|
|
.SH IMPORTANT
|
|
Unlike a real UPS, you should \fBnot\fR configure a upsmon master for this
|
|
driver. When a upsmon master sees the OB LB flags and tells the upsd server
|
|
it is OK to initiate the shutdown sequence, the server will latch the FSD
|
|
status and it will not be possible to restart the systems connected without
|
|
restarting the upsd server.
|
|
|
|
This will be a problem if the power returns after the clone UPS initiated
|
|
the shutdown sequence on it's outlet, but returns before the real UPS begins
|
|
shutting down. The solution is in the clone driver, that will insert the
|
|
FSD flag if needed without the help of a upsmon master.
|
|
|
|
.SH CAVEATS
|
|
The clone UPS will follow the status on the real UPS driver. You can only
|
|
make the clone UPS shutdown earlier than the real UPS driver, not later.
|
|
If the real UPS driver initiates a shutdown, the clone UPS driver will
|
|
immediately follow.
|
|
|
|
Be aware that the commands to shutdown/restart an outlet on the real UPS
|
|
drivers are not affected, so if you tell the real UPS driver to shutdown
|
|
the outlet of the clone UPS driver, your clients will lose power without
|
|
warning.
|
|
|
|
.SH AUTHOR
|
|
Arjen de Korte <adkorte-guest@alioth.debian.org>
|
|
|
|
.SH SEE ALSO
|
|
|
|
\fBupscmd\fR(1),
|
|
\fBupsrw\fR(1),
|
|
\fBups.conf\fR(5),
|
|
\fBnutupsdrv\fR(8)
|
|
|
|
.SS Internet resources:
|
|
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
|