ASEM(8)
=======

NAME
----
asem - driver for UPS in ASEM PB1300

NOTE
----
This man page only documents the hardware-specific features of the
*asem* driver.  For information about the core driver, see
linkman:nutupsdrv[8].

SUPPORTED HARDWARE
------------------
The *asem* driver supports the UPS in ASEM PB1300 embedded PCs. Likely other
I2C devices from the same manufacturer will work too, since this is a "custom"
charger.

Seems that there are two versions of the charger. Older one is based on
Max1667, newer one is a custom solution. Both are on I2C address 0x09.
To be compatible with both versions, the driver just reads bit 15 of address
0x13 which yields online/on battery status.
Battery monitor is a BQ2060 at address 0x0B.

EXTRA ARGUMENTS
---------------

The required parameter for this driver is the I2C bus name:

*port*='dev-node'::
On the Asem PB1300, this should be `/dev/i2c-7` for the i801 SMBUS adapter.

This driver also supports the following optional settings:

*lb*='num'::
Set the low battery threshold to 'num' volts.
 
*hb*='num'::
Set the high battery threshold to 'num' volts.

INSTALLATION
------------
This driver is specific to the Linux I2C API, and requires the lm_sensors
libi2c-dev or its equivalent to compile.

Beware that the SystemIO memory used by the I2C controller is reserved by ACPI.
If only a native I2C driver (e.g. i2c_i801, as of 3.5.X Linux kernels) is
available, then you'll need to relax the ACPI resources check. For example, you
can boot with the `acpi_enforce_resources=lax` option.

//////////////////////////////////////////
Optional: use DIAGNOSTICS to describe troubleshooting techniques that are
longer than what can be conveniently described in the driver error messages.

DIAGNOSTICS
-----------

//////////////////////////////////////////

KNOWN ISSUES AND BUGS
---------------------
The driver shutdown function is not implemented, so other arrangements must be
made to turn off the UPS.

AUTHORS
-------
Giuseppe Corbelli <giuseppe.corbelli@copanitalia.com>

SEE ALSO
--------

The core driver:
~~~~~~~~~~~~~~~~
linkman:nutupsdrv[8]

Internet resources:
~~~~~~~~~~~~~~~~~~~
PB1300 specifications: http://www.asem.it/en/products/industrial-automation/box-pcs/performance/pb1300/

BQ2060 datasheet: http://www.ti.com/lit/ds/symlink/bq2060.pdf

The NUT (Network UPS Tools) home page: http://www.networkupstools.org/