/* mge-mib.c - data to monitor MGE UPS SYSTEMS SNMP devices with NUT * * Copyright (C) * 2002-2012 Arnaud Quette * 2002-2003 J.W. Hoogervorst * * Sponsored by MGE UPS SYSTEMS * MGE Office Protection Systems * Eaton * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * */ #include "mge-mib.h" #define MGE_MIB_VERSION "0.5" /* TODO: * - MGE PDU MIB and sysOID (".1.3.6.1.4.1.705.2") */ /* SNMP OIDs set */ #define MGE_BASE_OID ".1.3.6.1.4.1.705.1" #define MGE_SYSOID MGE_BASE_OID #define MGE_OID_MODEL_NAME MGE_BASE_OID ".1.1.0" static info_lkp_t mge_lowbatt_info[] = { { 1, "LB" }, { 2, "" }, { 0, "NULL" } }; static info_lkp_t mge_onbatt_info[] = { { 1, "OB" }, { 2, "OL" }, { 0, "NULL" } }; static info_lkp_t mge_bypass_info[] = { { 1, "BYPASS" }, { 2, "" }, { 0, "NULL" } }; static info_lkp_t mge_boost_info[] = { { 1, "BOOST" }, { 2, "" }, { 0, "NULL" } }; static info_lkp_t mge_trim_info[] = { { 1, "TRIM" }, { 2, "" }, { 0, "NULL" } }; static info_lkp_t mge_overload_info[] = { { 1, "OVER" }, { 2, "" }, { 0, "NULL" } }; static info_lkp_t mge_replacebatt_info[] = { { 1, "RB" }, { 2, "" }, { 0, "NULL" } }; static info_lkp_t mge_output_util_off_info[] = { { 1, "OFF" }, { 2, "" }, { 0, "NULL" } }; static info_lkp_t mge_transfer_reason_info[] = { { 1, "" }, { 2, "input voltage out of range" }, { 3, "input frequency out of range" }, { 4, "utility off" }, { 0, "NULL" } }; static info_lkp_t ietf_test_result_info[] = { { 1, "done and passed" }, { 2, "done and warning" }, { 3, "done and error" }, { 4, "aborted" }, { 5, "in progress" }, { 6, "no test initiated" }, { 0, "NULL" } }; static info_lkp_t ietf_beeper_status_info[] = { { 1, "disabled" }, { 2, "enabled" }, { 3, "muted" }, { 0, "NULL" } }; static info_lkp_t ietf_yes_no_info[] = { { 1, "yes" }, { 2, "no" }, { 0, "NULL" } }; /* FIXME: the below may introduce status redundancy, that needs to be * adressed by the driver, as for usbhid-ups! */ static info_lkp_t ietf_power_source_info[] = { { 1, "" /* other */ }, { 2, "OFF" /* none */ }, #if 0 { 3, "OL" /* normal */ }, #endif { 4, "BYPASS" /* bypass */ }, { 5, "OB" /* battery */ }, { 6, "BOOST" /* booster */ }, { 7, "TRIM" /* reducer */ }, { 0, "NULL" } }; /* Parameters default values */ #define STR_DEFAULT_ONDELAY "30" /* Delay between return of utility power */ /* and powering up of load, in seconds */ /* CAUTION: ondelay > offdelay */ #define DEFAULT_ONDELAY 30 #define STR_DEFAULT_OFFDELAY "20" /* Delay before power off, in seconds */ #define DEFAULT_OFFDELAY 20 #define MGE_NOTHING_VALUE 1 #define MGE_START_VALUE 2 #define MGE_STOP_VALUE 3 /* TODO: PowerShare (per plug .1, .2, .3) and deals with delays */ /* Snmp2NUT lookup table */ static snmp_info_t mge_mib[] = { /* UPS page */ { "ups.mfr", ST_FLAG_STRING, SU_INFOSIZE, NULL, "Eaton", SU_FLAG_STATIC | SU_FLAG_ABSENT | SU_FLAG_OK, NULL }, { "ups.model", ST_FLAG_STRING, SU_INFOSIZE, ".1.3.6.1.4.1.705.1.1.1.0", "Generic SNMP UPS", SU_FLAG_STATIC | SU_FLAG_OK, NULL }, { "ups.serial", ST_FLAG_STRING, SU_INFOSIZE, ".1.3.6.1.4.1.705.1.1.7.0", "", SU_FLAG_STATIC | SU_FLAG_OK, NULL }, { "ups.firmware", ST_FLAG_STRING, SU_INFOSIZE, ".1.3.6.1.4.1.705.1.1.4.0", "", SU_FLAG_STATIC | SU_FLAG_OK, NULL }, { "ups.firmware.aux", ST_FLAG_STRING, SU_INFOSIZE, ".1.3.6.1.4.1.705.1.12.12.0", "", SU_FLAG_STATIC | SU_FLAG_OK, NULL }, { "ups.load", 0, 1, ".1.3.6.1.4.1.705.1.7.2.1.4.1", "", SU_OUTPUT_1, NULL }, { "ups.beeper.status", ST_FLAG_STRING, SU_INFOSIZE, "1.3.6.1.2.1.33.1.9.8.0", "", 0, ietf_beeper_status_info }, { "ups.L1.load", 0, 1, ".1.3.6.1.4.1.705.1.7.2.1.4.1", "", SU_OUTPUT_3, NULL }, { "ups.L2.load", 0, 1, ".1.3.6.1.4.1.705.1.7.2.1.4.2", "", SU_OUTPUT_3, NULL }, { "ups.L3.load", 0, 1, ".1.3.6.1.4.1.705.1.7.2.1.4.3", "", SU_OUTPUT_3, NULL }, { "ups.test.result", ST_FLAG_STRING, SU_INFOSIZE, ".1.3.6.1.2.1.33.1.7.3.0", "", 0, ietf_test_result_info }, { "ups.delay.shutdown", ST_FLAG_STRING | ST_FLAG_RW, 6, "1.3.6.1.2.1.33.1.8.2.0", STR_DEFAULT_OFFDELAY, SU_FLAG_ABSENT | SU_FLAG_OK, NULL }, { "ups.delay.start", ST_FLAG_STRING | ST_FLAG_RW, 6, "1.3.6.1.2.1.33.1.8.3.0", STR_DEFAULT_ONDELAY, SU_FLAG_ABSENT | SU_FLAG_OK, NULL }, { "ups.timer.shutdown", 0, 1, "1.3.6.1.2.1.33.1.8.2.0", "", SU_FLAG_OK, NULL }, { "ups.timer.start", 0, 1, "1.3.6.1.2.1.33.1.8.3.0", "", SU_FLAG_OK, NULL }, { "ups.timer.reboot", 0, 1, "1.3.6.1.2.1.33.1.8.4.0", "", SU_FLAG_OK, NULL }, { "ups.start.auto", ST_FLAG_RW, 1, "1.3.6.1.2.1.33.1.8.5.0", "", SU_FLAG_OK, ietf_yes_no_info }, /* status data */ { "ups.status", ST_FLAG_STRING, SU_INFOSIZE, ".1.3.6.1.4.1.705.1.5.11.0", "", SU_FLAG_OK | SU_STATUS_BATT, mge_replacebatt_info }, { "ups.status", ST_FLAG_STRING, SU_INFOSIZE, ".1.3.6.1.4.1.705.1.5.14.0", "", SU_FLAG_OK | SU_STATUS_BATT, mge_lowbatt_info }, { "ups.status", ST_FLAG_STRING, SU_INFOSIZE, ".1.3.6.1.4.1.705.1.5.16.0", "", SU_FLAG_OK | SU_STATUS_BATT, mge_lowbatt_info }, { "ups.status", ST_FLAG_STRING, SU_INFOSIZE, ".1.3.6.1.4.1.705.1.7.3.0", "", SU_FLAG_OK | SU_STATUS_BATT, mge_onbatt_info }, { "ups.status", ST_FLAG_STRING, SU_INFOSIZE, ".1.3.6.1.4.1.705.1.7.4.0", "", SU_FLAG_OK | SU_STATUS_BATT, mge_bypass_info }, { "ups.status", ST_FLAG_STRING, SU_INFOSIZE, ".1.3.6.1.4.1.705.1.7.7.0", "", SU_FLAG_OK | SU_STATUS_BATT, mge_output_util_off_info }, { "ups.status", ST_FLAG_STRING, SU_INFOSIZE, ".1.3.6.1.4.1.705.1.7.8.0", "", SU_FLAG_OK | SU_STATUS_BATT, mge_boost_info }, { "ups.status", ST_FLAG_STRING, SU_INFOSIZE, ".1.3.6.1.4.1.705.1.7.10.0", "", SU_FLAG_OK | SU_STATUS_BATT, mge_overload_info }, { "ups.status", ST_FLAG_STRING, SU_INFOSIZE, ".1.3.6.1.4.1.705.1.7.12.0", "", SU_FLAG_OK | SU_STATUS_BATT, mge_trim_info }, { "ups.status", ST_FLAG_STRING, SU_INFOSIZE, ".1.3.6.1.2.1.33.1.4.1.0", "", SU_STATUS_PWR | SU_FLAG_OK, ietf_power_source_info }, /* FIXME: Alarms * - upsmgBatteryChargerFault (.1.3.6.1.4.1.705.1.5.15.0), yes (1), no (2) * => Battery charger fail! * - upsmgBatteryFaultBattery (.1.3.6.1.4.1.705.1.5.9.0), yes (1), no (2) * => "Battery fault!" or? * - upsmgOutputOverTemp (.1.3.6.1.4.1.705.1.7.11.0), yes (1), no (2) * => "Temperature too high!" * - upsmgOutputInverterOff (.1.3.6.1.4.1.705.1.7.9.0), yes (1), no (2) * => "??" * - upsmgInputBadStatus (.1.3.6.1.4.1.705.1.6.3.0), yes (1), no (2) * => "bad volt or bad freq" */ /* Input page */ { "input.phases", 0, 1.0, ".1.3.6.1.4.1.705.1.6.1.0", "", SU_FLAG_SETINT, NULL, &input_phases }, { "input.voltage", 0, 0.1, ".1.3.6.1.4.1.705.1.6.2.1.2.1", "", SU_INPUT_1, NULL }, { "input.L1-N.voltage", 0, 0.1, ".1.3.6.1.4.1.705.1.6.2.1.2.1", "", SU_INPUT_3, NULL }, { "input.L2-N.voltage", 0, 0.1, ".1.3.6.1.4.1.705.1.6.2.1.2.2", "", SU_INPUT_3, NULL }, { "input.L3-N.voltage", 0, 0.1, ".1.3.6.1.4.1.705.1.6.2.1.2.3", "", SU_INPUT_3, NULL }, { "input.frequency", 0, 0.1, ".1.3.6.1.4.1.705.1.6.2.1.3.1", "", SU_INPUT_1, NULL }, { "input.L1.frequency", 0, 0.1, ".1.3.6.1.4.1.705.1.6.2.1.3.1", "", SU_INPUT_3, NULL }, { "input.L2.frequency", 0, 0.1, ".1.3.6.1.4.1.705.1.6.2.1.3.2", "", SU_INPUT_3, NULL }, { "input.L3.frequency", 0, 0.1, ".1.3.6.1.4.1.705.1.6.2.1.3.3", "", SU_INPUT_3, NULL }, { "input.voltage.minimum", 0, 0.1, ".1.3.6.1.4.1.705.1.6.2.1.4.1", "", SU_INPUT_1, NULL }, { "input.L1-N.voltage.minimum", 0, 0.1, ".1.3.6.1.4.1.705.1.6.2.1.4.1", "", SU_INPUT_3, NULL }, { "input.L2-N.voltage.minimum", 0, 0.1, ".1.3.6.1.4.1.705.1.6.2.1.4.2", "", SU_INPUT_3, NULL }, { "input.L3-N.voltage.minimum", 0, 0.1, ".1.3.6.1.4.1.705.1.6.2.1.4.3", "", SU_INPUT_3, NULL }, { "input.voltage.maximum", 0, 0.1, ".1.3.6.1.4.1.705.1.6.2.1.5.1", "", SU_INPUT_1, NULL }, { "input.L1-N.voltage.maximum", 0, 0.1, ".1.3.6.1.4.1.705.1.6.2.1.5.1", "", SU_INPUT_3, NULL }, { "input.L2-N.voltage.maximum", 0, 0.1, ".1.3.6.1.4.1.705.1.6.2.1.5.2", "", SU_INPUT_3, NULL }, { "input.L3-N.voltage.maximum", 0, 0.1, ".1.3.6.1.4.1.705.1.6.2.1.5.3", "", SU_INPUT_3, NULL }, { "input.current", 0, 0.1, ".1.3.6.1.4.1.705.1.6.2.1.6.1", "", SU_INPUT_1, NULL }, { "input.L1.current", 0, 0.1, ".1.3.6.1.4.1.705.1.6.2.1.6.1", "", SU_INPUT_3, NULL }, { "input.L2.current", 0, 0.1, ".1.3.6.1.4.1.705.1.6.2.1.6.2", "", SU_INPUT_3, NULL }, { "input.L3.current", 0, 0.1, ".1.3.6.1.4.1.705.1.6.2.1.6.3", "", SU_INPUT_3, NULL }, { "input.transfer.reason", ST_FLAG_STRING, SU_INFOSIZE, ".1.3.6.1.4.1.705.1.6.4.0", "", SU_FLAG_OK, mge_transfer_reason_info }, /* Output page */ { "output.phases", 0, 1.0, ".1.3.6.1.4.1.705.1.7.1.0", "", SU_FLAG_SETINT, NULL, &output_phases }, { "output.voltage", 0, 0.1, ".1.3.6.1.4.1.705.1.7.2.1.2.1", "", SU_OUTPUT_1, NULL }, { "output.L1-N.voltage", 0, 0.1, ".1.3.6.1.4.1.705.1.7.2.1.2.1", "", SU_OUTPUT_3, NULL }, { "output.L2-N.voltage", 0, 0.1, ".1.3.6.1.4.1.705.1.7.2.1.2.2", "", SU_OUTPUT_3, NULL }, { "output.L3-N.voltage", 0, 0.1, ".1.3.6.1.4.1.705.1.7.2.1.2.3", "", SU_OUTPUT_3, NULL }, { "output.frequency", 0, 0.1, ".1.3.6.1.4.1.705.1.7.2.1.3.1", "", SU_OUTPUT_1, NULL }, { "output.L1.frequency", 0, 0.1, ".1.3.6.1.4.1.705.1.7.2.1.3.1", "", SU_OUTPUT_3, NULL }, { "output.L2.frequency", 0, 0.1, ".1.3.6.1.4.1.705.1.7.2.1.3.2", "", SU_OUTPUT_3, NULL }, { "output.L3.frequency", 0, 0.1, ".1.3.6.1.4.1.705.1.7.2.1.3.3", "", SU_OUTPUT_3, NULL }, { "output.current", 0, 0.1, ".1.3.6.1.4.1.705.1.7.2.1.5.1", "", SU_OUTPUT_1, NULL }, { "output.L1.current", 0, 0.1, ".1.3.6.1.4.1.705.1.7.2.1.5.1", "", SU_OUTPUT_3, NULL }, { "output.L2.current", 0, 0.1, ".1.3.6.1.4.1.705.1.7.2.1.5.2", "", SU_OUTPUT_3, NULL }, { "output.L3.current", 0, 0.1, ".1.3.6.1.4.1.705.1.7.2.1.5.3", "", SU_OUTPUT_3, NULL }, /* Battery page */ { "battery.charge", 0, 1, ".1.3.6.1.4.1.705.1.5.2.0", "", SU_FLAG_OK, NULL }, { "battery.runtime", 0, 1, ".1.3.6.1.4.1.705.1.5.1.0", "", SU_FLAG_OK, NULL }, { "battery.runtime.low", 0, 1, ".1.3.6.1.4.1.705.1.4.7.0", "", SU_FLAG_OK, NULL }, { "battery.charge.low", ST_FLAG_STRING | ST_FLAG_RW, 2, ".1.3.6.1.4.1.705.1.4.8.0", "", SU_TYPE_INT | SU_FLAG_OK, NULL }, { "battery.voltage", 0, 0.1, ".1.3.6.1.4.1.705.1.5.5.0", "", SU_FLAG_OK, NULL }, /* Ambient page: Environment Sensor (ref 66 846) */ { "ambient.temperature", 0, 0.1, ".1.3.6.1.4.1.705.1.8.1.0", "", SU_TYPE_INT | SU_FLAG_OK, NULL }, { "ambient.humidity", 0, 0.1, ".1.3.6.1.4.1.705.1.8.2.0", "", SU_TYPE_INT | SU_FLAG_OK, NULL }, /* Outlet page */ { "outlet.id", 0, 1, NULL, "0", SU_FLAG_STATIC | SU_FLAG_ABSENT | SU_FLAG_OK, NULL }, { "outlet.desc", ST_FLAG_RW | ST_FLAG_STRING, 20, NULL, "Main Outlet", SU_FLAG_STATIC | SU_FLAG_ABSENT | SU_FLAG_OK, NULL }, /* instant commands. */ { "test.battery.start", 0, MGE_START_VALUE, ".1.3.6.1.4.1.705.1.10.4.0", "", SU_TYPE_CMD | SU_FLAG_OK, NULL }, /* Also use IETF OIDs * { "test.battery.stop", 0, 0, "1.3.6.1.2.1.33.1.7.1.0", "1.3.6.1.2.1.33.1.7.7.2", SU_TYPE_CMD, NULL }, * { "test.battery.start", 0, 0, "1.3.6.1.2.1.33.1.7.1.0", "1.3.6.1.2.1.33.1.7.7.3", SU_TYPE_CMD, NULL }, * { "test.battery.start.quick", 0, 0, "1.3.6.1.2.1.33.1.7.1.0", "1.3.6.1.2.1.33.1.7.7.4", SU_TYPE_CMD, NULL }, * { "test.battery.start.deep", 0, 0, "1.3.6.1.2.1.33.1.7.1.0", "1.3.6.1.2.1.33.1.7.7.5", SU_TYPE_CMD, NULL }, */ /* { "load.off", 0, MGE_START_VALUE, ".1.3.6.1.4.1.705.1.9.1.1.6.1", "", SU_TYPE_CMD | SU_FLAG_OK, NULL }, * { "load.on", 0, MGE_START_VALUE, ".1.3.6.1.4.1.705.1.9.1.1.3.1", "", SU_TYPE_CMD | SU_FLAG_OK, NULL }, * { "shutdown.return", 0, MGE_START_VALUE, ".1.3.6.1.4.1.705.1.9.1.1.9.1", "", SU_TYPE_CMD | SU_FLAG_OK, NULL }, */ /* IETF MIB fallback */ { "beeper.disable", 0, 1, "1.3.6.1.2.1.33.1.9.8.0", "", SU_TYPE_CMD, NULL }, { "beeper.enable", 0, 2, "1.3.6.1.2.1.33.1.9.8.0", "", SU_TYPE_CMD, NULL }, { "beeper.mute", 0, 3, "1.3.6.1.2.1.33.1.9.8.0", "", SU_TYPE_CMD, NULL }, /* Use ST_FLAG_STRING to get default value from ->dfl instead of info_len */ { "load.off.delay", 0, DEFAULT_OFFDELAY, "1.3.6.1.2.1.33.1.8.2.0", "", SU_TYPE_CMD, NULL }, { "load.on.delay", 0, DEFAULT_ONDELAY, "1.3.6.1.2.1.33.1.8.3.0", "", SU_TYPE_CMD, NULL }, /* end of structure. */ { NULL, 0, 0, NULL, NULL, 0, NULL } }; mib2nut_info_t mge = { "mge", MGE_MIB_VERSION, "", MGE_OID_MODEL_NAME, mge_mib, MGE_SYSOID };