(* Module: NutUpsConf Parses @CONFPATH@/ups.conf Author: Raphael Pinson Frederic Bohe Arnaud Quette About: License This file is licensed under the GPL. About: Lens Usage Sample usage of this lens in augtool * Print all drivers used > print /files/@CONFPATH@/ups.conf/*/driver About: Configuration files This lens applies to @CONFPATH@/ups.conf. See . *) module NutUpsConf = autoload ups_xfm (************************************************************************ * Group: UPS.CONF *************************************************************************) let ups_comment = IniFile.comment IniFile.comment_re IniFile.comment_default let ups_sep = IniFile.sep IniFile.sep_re IniFile.sep_default let ups_global = "chroot" | "driverpath" | "maxstartdelay" | "maxretry" | "retrydelay" | "pollinterval" | "synchronous" | "user" let ups_fields = "driver" | "port" | "sdorder" | "desc" | "nolock" | "ignorelb" | "maxstartdelay" | "synchronous" | "CP" | "CS" | "ID" | "LB" | "LowBatt" | "OL" | "OffDelay" | "OnDelay" | "SD" | "advanced_eco_mode" | "advorder" | "alarm_control" | "authPassword" | "authProtocol" | "authtype" | "awd" | "batteryPercentage" | "battery_alarm" | "battery_max" | "battery_min" | "battery_number" | "battery_open_status_check" | "battext" | "battvoltmult" | "baud_rate" | "baudrate" | "bus" | "bypass_alarm" | "bypass_forbidding" | "bypass_when_off" | "cable" | "cablepower" | "chargetime" | "community" | "constant_phase_angle" | "converter_mode" | "daysoff" | "daysweek" | "dumbterm" | "eco_mode" | "explore" | "fake_lowbatt" | "flash" | "frequency" | "fruid" | "full_update" | "hb" | "houroff" | "houron" | "idleload" | "ignoresab" | "input_timeout" | "interruptonly" | "interruptsize" | "langid_fix" | "lb" | "limited_runtime_on_battery" | "linevoltage" | "load.off" | "load.on" | "load.status" | "loadPercentage" | "login" | "lowbatt" | "manufacturer" | "max_bypass_freq" | "max_bypass_volt" | "max_load" | "maxreport" | "methodOfFlowControl" | "mfr" | "mibs" | "min_bypass_freq" | "min_bypass_volt" | "mincharge" | "minruntime" | "model" | "modelname" | "nohang" | "nombattvolt" | "norating" | "notification" | "notransferoids" | "novendor" | "nowarn_noimp" | "numOfBytesFromUPS" | "offdelay" | "oldmac" | "ondelay" | "output_pace" | "output_phase_angle" | "password" | "pins_shutdown_mode" | "pollfreq" | "pollonly" | "powerup" | "prefix" | "prgshut" | "privPassword" | "privProtocol" | "product" | "productid" | "protocol" | "rebootdelay" | "reset_to_default" | "runtimecal" | "sdtime" | "sdtype" | "secLevel" | "secName" | "serial" | "serialnumber" | "shutdownArguments" | "shutdown_delay" | "shutdown_duration" | "shutdown_timer" | "silent" | "site_fault_detection" | "snmp_retries" | "snmp_timeout" | "snmp_version" | "startdelay" | "status_only" | "stayoff" | "subdriver" | "subscribe" | "testing" | "testtime" | "timeout" | "ttymode" | "type" | "ups.delay.shutdown" | "ups.delay.start" | "upstype" | "usb_set_altinterface" | "usd" | "use_crlf" | "use_pre_lf" | "username" | "validationSequence" | "vendor" | "vendorid" | "voltage" | "wait" | "work_range_type" | "wugrace" let ups_entry = IniFile.indented_entry (ups_global|ups_fields) ups_sep ups_comment let ups_title = IniFile.indented_title IniFile.record_re let ups_record = IniFile.record ups_title ups_entry let ups_lns = IniFile.lns ups_record ups_comment let ups_filter = (incl "@CONFPATH@/ups.conf") . Util.stdexcl let ups_xfm = transform ups_lns ups_filter