SKEL(8)
=======

NAME
----
skel - skeleton driver man page

NOTE
----
This man page only documents the hardware-specific features of the
*skel* driver.  For information about the core driver, see
linkman:nutupsdrv[8].

//////////////////////////////////////////
The following lines are comments.

When copying this man page for your new driver, be sure to replace all
occurrances of "skel" and "SKEL" by your actual driver name.

If you have AsciiDoc installed, you can test the formatting of your man page by
running:
  asciidoc --backend=xhtml11 -o skel.html skel.txt

After writing a man page, be sure to add it to the appropriate variable in
Makefile.am in this directory.

In the "NAME" section, you must follow the format above, including separating
the driver name from its description by "-". This is to ensure that the
apropos(8) database is properly rebuilt.
//////////////////////////////////////////

SUPPORTED HARDWARE
------------------
*skel* supports ...

//////////////////////////////////////////
If the driver only works with certain cables, this is a good place to
mention it:

CABLING
-------

//////////////////////////////////////////

EXTRA ARGUMENTS
---------------
This driver also supports the following optional settings:

*option1*='num'::
Set the value of ... to 'num'. Contrast with *option2*.
 
*option2*='string'::
Some other option.

//////////////////////////////////////////
Optional: list supported instant commands here:

INSTANT COMMANDS
----------------

*instcmd1*::
Command 1.
//////////////////////////////////////////

//////////////////////////////////////////
Optional: use INSTALLATION if you need special parameters to the configure
script, or additional libraries as prerequisites.

INSTALLATION
------------

//////////////////////////////////////////

//////////////////////////////////////////
Optional: use DIAGNOSTICS to describe troubleshooting techniques that are
longer than what can be conveniently described in the driver error messages.

DIAGNOSTICS
-----------

//////////////////////////////////////////

//////////////////////////////////////////
You may leave this as "none known at this time", or describe any trouble
encountered when implementing the protocol for your UPS.

KNOWN ISSUES AND BUGS
---------------------
*Got "EPERM: Operation not permitted" upon driver startup*::

You have forgotten to install the udev files, as explained
in the INSTALLATION section above. Don't forget to restart
udev so that it applies these changes.
//////////////////////////////////////////

//////////////////////////////////////////
An email address is not strictly necessary, but you may wish to provide
some form of contact information so that users can report bugs.
//////////////////////////////////////////

AUTHORS
-------
J Random User <user@example.org>

//////////////////////////////////////////
If this driver is ever made obsolete by another driver, mention the
replacement driver in the "SEE ALSO" section. You may also wish to point
the user to other drivers which may better support their hardware, if there
is ambiguity based on the driver name.
//////////////////////////////////////////

SEE ALSO
--------

The core driver:
~~~~~~~~~~~~~~~~
linkman:nutupsdrv[8]

Internet resources:
~~~~~~~~~~~~~~~~~~~
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/