/* * bcmxcp.h -- header for BCM/XCP module */ #ifndef _POWERWARE_H #define _POWERWARE_H #include "timehead.h" /* Have to wait at least 0,25 sec max 16 sec */ /* 1 second is too short for PW9120 (leads to communication errors). So we set it to 2 seconds */ #define PW_SLEEP 2 #define PW_MAX_TRY 3 /* How many times we try to send data. */ #define PW_COMMAND_START_BYTE (unsigned char)0xAB #define PW_LAST_SEQ (unsigned char)0x80 /* bit flag to indicate final sequence */ #define PW_SEQ_MASK (unsigned char)0x7F /* bit mask to extract just the sequence # */ #define PW_HEADER_LENGTH 4 /* Size of response header */ #define PW_ANSWER_MAX_SIZE 256 /* No Autorisation required */ #define PW_ID_BLOCK_REQ (unsigned char)0x31 /* Model name, ... length 1 */ #define PW_EVENT_HISTORY_LOG_REQ (unsigned char)0x32 /* List alarms that have occurred. length 1 */ #define PW_STATUS_REQ (unsigned char)0x33 /* On Line, On Bypass, ... length 1-2 */ #define PW_METER_BLOCK_REQ (unsigned char)0x34 /* Current UPS status (Load, utility,...) length 1 */ #define PW_CUR_ALARM_REQ (unsigned char)0x35 /* Current alarm and event request. length 1 */ #define PW_CONFIG_BLOCK_REQ (unsigned char)0x36 /* Model serial#, ... length 1 */ #define PW_UTILITY_STATISTICS_BLOCK_REQ (unsigned char)0x38 /* List utility power quality. length 1 */ #define PW_WAVEFORM_BLOCK_REQ (unsigned char)0x3A /* Sampled waveform data. length 7 */ #define PW_BATTERY_REQ (unsigned char)0x3B /* Charging, floating, ... length 1 */ #define PW_LIMIT_BLOCK_REQ (unsigned char)0x3C /* Configuration (Bypass thresholds,...). length 1 */ #define PW_TEST_RESULT_REQ (unsigned char)0x3F /* Get the results for a system test. length 1 */ #define PW_COMMAND_LIST_REQ (unsigned char)0x40 /* Available commands. length 1 */ #define PW_OUT_MON_BLOCK_REQ (unsigned char)0x41 /* Outlet monitor request length 1 */ #define PW_COM_CAP_REQ (unsigned char)0x42 /* Request communication capabilities. length 2 */ #define PW_UPS_TOP_DATA_REQ (unsigned char)0x43 /* Request ups topology data requset. length 1 */ #define PW_COM_PORT_LIST_BLOCK_REQ (unsigned char)0x44 /* Request communication port list. length 1 */ #define PW_REQUEST_SCRATCHPAD_DATA_REQ (unsigned char)0x45 /* Request data from scratchpad. length 2*/ /* Need autorisation before these commands */ #define PW_GO_TO_BYPASS (unsigned char)0x88 /* Transfer load from inverter to bypass. length 1 or 3 */ #define PW_UPS_ON (unsigned char)0x89 /* UPS on command. length 1-2 */ #define PW_LOAD_OFF_RESTART (unsigned char)0x8A /* Delayed LoadPowerOff & Restart command. length 2-4 */ #define PW_UPS_OFF (unsigned char)0x8B /* UPS off command. length 1-2 */ #define PW_DECREMENT_OUTPUT_VOLTAGE (unsigned char)0x8C /* Decrease output voltage. length 1 */ #define PW_INCREMENT_OUTPUT_VOLTAGE (unsigned char)0x8D /* Increase output voltage. length 1 */ #define PW_SET_TIME_AND_DATE (unsigned char)0x90 /* Set the real-time clock inside UPS. length 8 */ #define PW_UPS_ON_TIME (unsigned char)0x91 /* Scheduled UPS on in n minutes. length 3-4 */ #define PW_UPS_ON_AT_TIME (unsigned char)0x92 /* Schedule UPS on at specified date and time. length 7-8 */ #define PW_UPS_OFF_TIME (unsigned char)0x93 /* Scheduled UPS off in n minutes. length 3-4 */ #define PW_UPS_OFF_AT_TIME (unsigned char)0x94 /* Schedule UPS off at specified date and time. length 7-8 */ #define PW_SET_CONF_COMMAND (unsigned char)0x95 /* Set configuration command. length 4 */ #define PW_SET_OUTLET_COMMAND (unsigned char)0x97 /* Set outlet parameter command length 5. not in 5115 */ #define PW_SET_COM_COMMAND (unsigned char)0x98 /* Set communication parameter command. length 5 */ #define PW_SET_SCRATHPAD_SECTOR (unsigned char)0x99 /* Write data to scratchpad. length 3 or 18 */ #define PW_SET_POWER_STRATEGY (unsigned char)0x9A /* Set the power strategy. length 2 */ #define PW_SET_REQ_ONLY_MODE (unsigned char)0xA0 /* Set request only mode command. length 1 */ #define PW_SET_UNREQUESTED_MODE (unsigned char)0xA1 /* Set unrequested mode command. length 1 */ #define PW_INIT_BAT_TEST (unsigned char)0xB1 /* Initiate battery test command. length 3 */ #define PW_INIT_SYS_TEST (unsigned char)0xB2 /* Initiate general system test command. length 2 */ #define PW_SELECT_SUBMODULE (unsigned char)0xCE /* Select a sub module. length 2-7 */ #define PW_AUTHORIZATION_CODE (unsigned char)0xCF /* Authorization code. length 4 or 7 */ /* Define the XCP system test */ #define PW_SYS_TEST_GENERAL (unsigned char)0x01 /* Initiate General system Test */ #define PW_SYS_TEST_SCHEDULE_BATTERY_COMMISSION (unsigned char)0x02 /* Schedule Battery Commissioning Test */ #define PW_SYS_TEST_ALTERNATE_AC_INPUT (unsigned char)0x03 /* Test Alternate AC Input */ #define PW_SYS_TEST_FLASH_LIGHTS (unsigned char)0x04 /* Flash the Lights Test */ #define PW_SYS_TEST_REPORT_CAPABILITIES (unsigned char)0xFF /* Report Systems Test Capabilities */ /* Outlet operations */ #define PW_ALL_OUTLETS 0 #define PW_AUTO_OFF_DELAY 1 #define PW_AUTO_ON_DELAY 2 /* 0 means Abort countdown */ #define PW_TURN_OFF_DELAY 3 #define PW_TURN_ON_DELAY 4 /* Config vars*/ #define PW_CONF_BYPASS_FREQ_DEV_LIMIT 0x01 #define PW_CONF_LOW_DEV_LIMIT 0x02 #define PW_CONF_HIGH_DEV_LIMIT 0x03 #define PW_CONF_PHASE_DEV_LIMIT 0x04 #define PW_CONF_LOW_BATT 0x05 #define PW_CONF_BEEPER 0x06 #define PW_CONF_RETURN_DELAY 0x07 #define PW_CONF_RETURN_CAP 0x08 #define PW_CONF_MAX_TEMP 0x0a #define PW_CONF_NOMINAL_OUT_VOLTAGE 0x0b #define PW_CONF_SLEEP_TH_LOAD 0x0d #define PW_CONF_SLEEP_DELAY 0x0e #define PW_CONF_BATT_STRINGS 0x0f #define PW_CONF_REQ 0xff /* Config block offsets */ #define BCMXCP_CONFIG_BLOCK_MACHINE_TYPE_CODE 0 #define BCMXCP_CONFIG_BLOCK_MODEL_NUMBER 2 #define BCMXCP_CONFIG_BLOCK_MODEL_CONF_WORD 4 #define BCMXCP_CONFIG_BLOCK_INPUT_FREQ_DEV_LIMIT 6 #define BCMXCP_CONFIG_BLOCK_NOMINAL_OUTPUT_VOLTAGE 8 #define BCMXCP_CONFIG_BLOCK_NOMINAL_OUTPUT_FREQ 10 #define BCMXCP_CONFIG_BLOCK_OUTPUT_PHASE_ANGLE 12 #define BCMXCP_CONFIG_BLOCK_HW_MODULES_INSTALLED_WORD1 14 #define BCMXCP_CONFIG_BLOCK_HW_MODULES_INSTALLED_BYTE3 16 /* KEEP THIS UNTILL PARSING OK. USE THIS BYTE. */ #define BCMXCP_CONFIG_BLOCK_HW_MODULES_INSTALLED_WORD2 16 #define BCMXCP_CONFIG_BLOCK_HW_MODULES_INSTALLED_WORD3 18 #define BCMXCP_CONFIG_BLOCK_HW_MODULES_INSTALLED_WORD4 20 #define BCMXCP_CONFIG_BLOCK_BATTERY_DATA_WORD1 22 /* Undefined at this time.*/ #define BCMXCP_CONFIG_BLOCK_BATTERY_DATA_WORD2 24 /* Per cell inverter shutdown voltage at full rated load. (volt/cell)* 100 */ #define BCMXCP_CONFIG_BLOCK_BATTERY_DATA_WORD3 26 /* LOW BYTE Number of battery strings. HIGH BYTE undefined at this time.*/ #define BCMXCP_CONFIG_BLOCK_EXTENDED_BLOCK_LENGTH 47 #define BCMXCP_CONFIG_BLOCK_PART_NUMBER 48 #define BCMXCP_CONFIG_BLOCK_SERIAL_NUMBER 64 /*Battery block offsets*/ #define BCMXCP_BATTDATA_BLOCK_BATT_TEST_STATUS 0 #define BCMXCP_BATTDATA_BLOCK_BATT_VOLTS_T1 1 #define BCMXCP_BATTDATA_BLOCK_BATT_VOLTS_T2 5 #define BCMXCP_BATTDATA_BLOCK_TEST_DURATION 9 #define BCMXCP_BATTDATA_BLOCK_UTIL_VOLT 10 #define BCMXCP_BATTDATA_BLOCK_INPUT_CURRENT 14 #define BCMXCP_BATTDATA_BLOCK_NUMBER_OF_STRINGS 18 /*BATT_TEST_STATUS for external strings (1 byte each) if BCMXCP_BATTDATA_BLOCK_NUMBER_OF_STRINGS == 0 no external test statuses at all*/ /*next - number of ABM Statuses - at least 1 for internal batteries*/ /* Index for Extende Limits block offsets */ #define BCMXCP_EXT_LIMITS_BLOCK_NOMINAL_INPUT_VOLTAGE 0 #define BCMXCP_EXT_LIMITS_BLOCK_NOMINAL_INPUT_FREQ 2 #define BCMXCP_EXT_LIMITS_BLOCK_NOMINAL_TRUE_POWER 4 #define BCMXCP_EXT_LIMITS_BLOCK_COMM_SPEC_VERSION 6 #define BCMXCP_EXT_LIMITS_BLOCK_FREQ_DEV_LIMIT 8 #define BCMXCP_EXT_LIMITS_BLOCK_VOLTAGE_LOW_DEV_LIMIT 10 #define BCMXCP_EXT_LIMITS_BLOCK_VOLTAGE_HIGE_DEV_LIMIT 12 #define BCMXCP_EXT_LIMITS_BLOCK_PHASE_DEV_LIMIT 14 #define BCMXCP_EXT_LIMITS_BLOCK_LOW_BATT_WARNING 16 #define BCMXCP_EXT_LIMITS_BLOCK_HORN_STATUS 17 #define BCMXCP_EXT_LIMITS_BLOCK_MIN_INPUT_VOLTAGE 18 #define BCMXCP_EXT_LIMITS_BLOCK_MAX_INPUT_VOLTAGE 20 #define BCMXCP_EXT_LIMITS_BLOCK_RETURN_STAB_DELAY 22 #define BCMXCP_EXT_LIMITS_BLOCK_BATT_CAPACITY_RETURN 24 #define BCMXCP_EXT_LIMITS_BLOCK_AMBIENT_TEMP_LOW 25 #define BCMXCP_EXT_LIMITS_BLOCK_AMBIENT_TEMP_HIGE 26 #define BCMXCP_EXT_LIMITS_BLOCK_SLEEP_TH_LOAD 29 #define BCMXCP_EXT_LIMITS_BLOCK_SLEEP_DELAY 30 /* Indexes for meter map */ #define BCMXCP_METER_MAP_OUTPUT_VOLTS_AB 0 /* mapped */ #define BCMXCP_METER_MAP_OUTPUT_VOLTS_BC 1 /* mapped */ #define BCMXCP_METER_MAP_OUTPUT_VOLTS_CA 2 /* mapped */ #define BCMXCP_METER_MAP_INPUT_VOLTS_AB 3 /* mapped */ #define BCMXCP_METER_MAP_INPUT_VOLTS_BC 4 /* mapped */ #define BCMXCP_METER_MAP_INPUT_VOLTS_CA 5 /* mapped */ #define BCMXCP_METER_MAP_INVERTER_VOLTS_AB 6 #define BCMXCP_METER_MAP_INVERTER_VOLTS_BC 7 #define BCMXCP_METER_MAP_INVERTER_VOLTS_CA 8 #define BCMXCP_METER_MAP_BYPASS_VOLTS_AB 9 #define BCMXCP_METER_MAP_BYPASS_VOLTS_BC 10 #define BCMXCP_METER_MAP_BYPASS_VOLTS_CA 11 #define BCMXCP_METER_MAP_MAIN_LOGIC_POWER 12 #define BCMXCP_METER_MAP_SECONDARY_V_PLUS_POWER 13 #define BCMXCP_METER_MAP_SECONDARY_V_MINUS_POWER 14 #define BCMXCP_METER_MAP_INVERTER_AVG_CURRENT_PHASE_A 15 #define BCMXCP_METER_MAP_INVERTER_AVG_CURRENT_PHASE_B 16 #define BCMXCP_METER_MAP_INVERTER_AVG_CURRENT_PHASE_C 17 #define BCMXCP_METER_MAP_INPUT_CURRENT_PHASE_A 18 /* mapped */ #define BCMXCP_METER_MAP_INPUT_CURRENT_PHASE_B 19 /* mapped */ #define BCMXCP_METER_MAP_INPUT_CURRENT_PHASE_C 20 /* mapped */ #define BCMXCP_METER_MAP_OUTPUT_WATTS 21 #define BCMXCP_METER_MAP_INPUT_WATTS 22 /* mapped */ #define BCMXCP_METER_MAP_OUTPUT_VA 23 /* mapped */ #define BCMXCP_METER_MAP_INPUT_VA 24 /* mapped */ #define BCMXCP_METER_MAP_OUTPUT_POWER_FACTOR 25 /* mapped */ #define BCMXCP_METER_MAP_INPUT_POWER_FACTOR 26 /* mapped */ #define BCMXCP_METER_MAP_OUTPUT_FREQUENCY 27 /* mapped */ #define BCMXCP_METER_MAP_INPUT_FREQUENCY 28 /* mapped */ #define BCMXCP_METER_MAP_INVERTER_FREQUENCY 29 #define BCMXCP_METER_MAP_BYPASS_FREQUENCY 30 /* mapped */ #define BCMXCP_METER_MAP_DC_LINK_VOLTS_DC 31 #define BCMXCP_METER_MAP_BATTERY_CURRENT 32 /* mapped */ #define BCMXCP_METER_MAP_BATTERY_VOLTAGE 33 /* mapped */ #define BCMXCP_METER_MAP_PERCENT_BATTERY_LEFT 34 /* mapped */ #define BCMXCP_METER_MAP_BATTERY_TIME_REMAINING 35 /* mapped */ #define BCMXCP_METER_MAP_BATTERY_CHARGE_TIME 36 #define BCMXCP_METER_MAP_PEAK_INVERTER_CURRENT_PHASE_A 37 #define BCMXCP_METER_MAP_PEAK_INVERTER_CURRENT_PHASE_B 38 #define BCMXCP_METER_MAP_PEAK_INVERTER_CURRENT_PHASE_C 39 #define BCMXCP_METER_MAP_AVG_INPUT_CURRENT_3_PHASE_SUM 40 #define BCMXCP_METER_MAP_BATTERY_DCUV_BAR_CHART 41 /* mapped */ #define BCMXCP_METER_MAP_INPUT_CURRENT_BAR_CHART 42 #define BCMXCP_METER_MAP_LOW_BATTERY_WARNING_V_BAR_CHART 43 /* mapped */ #define BCMXCP_METER_MAP_DC_VOLTS_BAR_CHART 44 #define BCMXCP_METER_MAP_BATTERY_CHARGING_CURRENT_BAR_CHART 45 #define BCMXCP_METER_MAP_BATTERY_DISCHARGING_CURRENT_BAR_CHART 46 /* mapped */ #define BCMXCP_METER_MAP_PERCENT_LOAD_PHASE_A 47 /* mapped */ #define BCMXCP_METER_MAP_PERCENT_LOAD_PHASE_B 48 /* mapped */ #define BCMXCP_METER_MAP_PERCENT_LOAD_PHASE_C 49 /* mapped */ #define BCMXCP_METER_MAP_OUTPUT_VA_PHASE_A 50 /* mapped */ #define BCMXCP_METER_MAP_OUTPUT_VA_PHASE_B 51 /* mapped */ #define BCMXCP_METER_MAP_OUTPUT_VA_PHASE_C 52 /* mapped */ #define BCMXCP_METER_MAP_BYPASS_VOLTS_PHASE_A 53 /* mapped */ #define BCMXCP_METER_MAP_BYPASS_VOLTS_PHASE_B 54 /* mapped */ #define BCMXCP_METER_MAP_BYPASS_VOLTS_PHASE_C 55 /* mapped */ #define BCMXCP_METER_MAP_INPUT_VOLTS_PHASE_A 56 /* mapped */ #define BCMXCP_METER_MAP_INPUT_VOLTS_PHASE_B 57 /* mapped */ #define BCMXCP_METER_MAP_INPUT_VOLTS_PHASE_C 58 /* mapped */ #define BCMXCP_METER_MAP_INVERTER_VOLTS_PHASE_A 59 #define BCMXCP_METER_MAP_INVERTER_VOLTS_PHASE_B 60 #define BCMXCP_METER_MAP_INVERTER_VOLTS_PHASE_C 61 #define BCMXCP_METER_MAP_AMBIENT_TEMPERATURE 62 /* mapped */ #define BCMXCP_METER_MAP_HEATSINK_TEMPERATURE 63 /* mapped */ #define BCMXCP_METER_MAP_POWER_SUPPLY_TEMPERATURE 64 /* mapped */ #define BCMXCP_METER_MAP_LOAD_CURRENT_PHASE_A 65 /* mapped */ #define BCMXCP_METER_MAP_LOAD_CURRENT_PHASE_B 66 /* mapped */ #define BCMXCP_METER_MAP_LOAD_CURRENT_PHASE_C 67 /* mapped */ #define BCMXCP_METER_MAP_LOAD_CURRENT_PHASE_A_BAR_CHART 68 /* mapped */ #define BCMXCP_METER_MAP_LOAD_CURRENT_PHASE_B_BAR_CHART 69 /* mapped */ #define BCMXCP_METER_MAP_LOAD_CURRENT_PHASE_C_BAR_CHART 70 /* mapped */ #define BCMXCP_METER_MAP_OUTPUT_VA_BAR_CHART 71 /* mapped */ #define BCMXCP_METER_MAP_DATE 72 /* mapped */ #define BCMXCP_METER_MAP_TIME 73 /* mapped */ #define BCMXCP_METER_MAP_POSITIVE_DC_LINK_RAIL_VOLTAGE 74 #define BCMXCP_METER_MAP_NEGATIVE_DC_LINK_RAIL_VOLTAGE 75 #define BCMXCP_METER_MAP_AUTO_BALANCE_VOLTAGE_DC 76 #define BCMXCP_METER_MAP_BATTERY_TEMPERATURE 77 /* mapped */ #define BCMXCP_METER_MAP_OUTPUT_VOLTS_A 78 /* mapped */ #define BCMXCP_METER_MAP_OUTPUT_VOLTS_B 79 /* mapped */ #define BCMXCP_METER_MAP_OUTPUT_VOLTS_C 80 /* mapped */ #define BCMXCP_METER_MAP_NEUTRAL_CURRENT 81 #define BCMXCP_METER_MAP_OUTPUT_WATTS_PHASE_A 82 /* mapped */ #define BCMXCP_METER_MAP_OUTPUT_WATTS_PHASE_B 83 /* mapped */ #define BCMXCP_METER_MAP_OUTPUT_WATTS_PHASE_C 84 /* mapped */ #define BCMXCP_METER_MAP_OUTPUT_WATTS_PHASE_A_B_C_BAR_CHART 85 /* mapped */ #define BCMXCP_METER_MAP_RECTIFIER_DC_CURRENT 86 #define BCMXCP_METER_MAP_POSITIVE_BATTERY_VOLTAGE 87 #define BCMXCP_METER_MAP_NEGATIVE_BATTERY_VOLTAGE 88 #define BCMXCP_METER_MAP_POSITIVE_BATTERY_CURRENT 89 #define BCMXCP_METER_MAP_NEGATIVE_BATTERY_CURRENT 90 #define BCMXCP_METER_MAP_LINE_EVENT_COUNTER 91 /* mapped */ #define BCMXCP_METER_MAP_OUTPUT_V1_PERCENT 92 #define BCMXCP_METER_MAP_OUTPUT_V2_PERCENT 93 #define BCMXCP_METER_MAP_OUTPUT_V3_PERCENT 94 #define BCMXCP_METER_MAP_OUTPUT_I1_PERCENT 95 #define BCMXCP_METER_MAP_OUTPUT_I2_PERCENT 96 #define BCMXCP_METER_MAP_OUTPUT_I3_PERCENT 97 #define BCMXCP_METER_MAP_INPUT_V1_PERCENT 98 #define BCMXCP_METER_MAP_INPUT_V2_PERCENT 99 #define BCMXCP_METER_MAP_INPUT_V3_PERCENT 100 #define BCMXCP_METER_MAP_INPUT_I1_PERCENT 101 #define BCMXCP_METER_MAP_INPUT_I2_PERCENT 102 #define BCMXCP_METER_MAP_INPUT_I3_PERCENT 103 #define BCMXCP_METER_MAP_GROUND_CURRENT 104 #define BCMXCP_METER_MAP_OUTPUT_CREST_FACTOR_L1 105 #define BCMXCP_METER_MAP_OUTPUT_CREST_FACTOR_L2 106 #define BCMXCP_METER_MAP_OUTPUT_CREST_FACTOR_L3 107 #define BCMXCP_METER_MAP_OUTPUT_KW_HOUR 108 #define BCMXCP_METER_MAP_INPUT_VOLTAGE_THD_LINE1 109 #define BCMXCP_METER_MAP_INPUT_VOLTAGE_THD_LINE2 110 #define BCMXCP_METER_MAP_INPUT_VOLTAGE_THD_LINE3 111 #define BCMXCP_METER_MAP_INPUT_CURRENT_THD_LINE1 112 #define BCMXCP_METER_MAP_INPUT_CURRENT_THD_LINE2 113 #define BCMXCP_METER_MAP_INPUT_CURRENT_THD_LINE3 114 #define BCMXCP_METER_MAP_OUTPUT_VOLTAGE_THD_LINE1 115 #define BCMXCP_METER_MAP_OUTPUT_VOLTAGE_THD_LINE2 116 #define BCMXCP_METER_MAP_OUTPUT_VOLTAGE_THD_LINE3 117 #define BCMXCP_METER_MAP_OUTPUT_CURRENT_THD_LINE1 118 #define BCMXCP_METER_MAP_OUTPUT_CURRENT_THD_LINE2 119 #define BCMXCP_METER_MAP_OUTPUT_CURRENT_THD_LINE3 120 #define BCMXCP_METER_MAP_INPUT_CREST_FACTOR_L1 121 #define BCMXCP_METER_MAP_INPUT_CREST_FACTOR_L2 122 #define BCMXCP_METER_MAP_INPUT_CREST_FACTOR_L3 123 #define BCMXCP_METER_MAP_INPUT_KW_HOUR 124 #define BCMXCP_METER_MAP_BATTERY_LIFE_REMAINING 125 #define BCMXCP_METER_MAP_SECONDARY_NEUTRAL_CURRENT 126 #define BCMXCP_METER_MAP_SECONDARY_GROUND_CURRENT 127 #define BCMXCP_METER_MAP_HOURS_OF_OPERATION 128 /* Indexes for alarm map */ #define BCMXCP_ALARM_INVERTER_AC_OVER_VOLTAGE 0 #define BCMXCP_ALARM_INVERTER_AC_UNDER_VOLTAGE 1 #define BCMXCP_ALARM_INVERTER_OVER_OR_UNDER_FREQ 2 #define BCMXCP_ALARM_BYPASS_AC_OVER_VOLTAGE 3 #define BCMXCP_ALARM_BYPASS_AC_UNDER_VOLTAGE 4 #define BCMXCP_ALARM_BYPASS_OVER_OR_UNDER_FREQ 5 #define BCMXCP_ALARM_INPUT_AC_OVER_VOLTAGE 6 #define BCMXCP_ALARM_INPUT_AC_UNDER_VOLTAGE 7 #define BCMXCP_ALARM_INPUT_UNDER_OR_OVER_FREQ 8 #define BCMXCP_ALARM_OUTPUT_OVER_VOLTAGE 9 #define BCMXCP_ALARM_OUTPUT_UNDER_VOLTAGE 10 #define BCMXCP_ALARM_OUTPUT_UNDER_OR_OVER_FREQ 11 #define BCMXCP_ALARM_REMOTE_EMERGENCY_PWR_OFF 12 #define BCMXCP_ALARM_REMOTE_GO_TO_BYPASS 13 #define BCMXCP_ALARM_BUILDING_ALARM_6 14 #define BCMXCP_ALARM_BUILDING_ALARM_5 15 #define BCMXCP_ALARM_BUILDING_ALARM_4 16 #define BCMXCP_ALARM_BUILDING_ALARM_3 17 #define BCMXCP_ALARM_BUILDING_ALARM_2 18 #define BCMXCP_ALARM_BUILDING_ALARM_1 19 #define BCMXCP_ALARM_STATIC_SWITCH_OVER_TEMP 20 #define BCMXCP_ALARM_CHARGER_OVER_TEMP 21 #define BCMXCP_ALARM_CHARGER_LOGIC_PWR_FAIL 22 #define BCMXCP_ALARM_CHARGER_OVER_VOLTAGE_OR_CURRENT 23 #define BCMXCP_ALARM_INVERTER_OVER_TEMP 24 #define BCMXCP_ALARM_OUTPUT_OVERLOAD 25 #define BCMXCP_ALARM_RECTIFIER_INPUT_OVER_CURRENT 26 #define BCMXCP_ALARM_INVERTER_OUTPUT_OVER_CURRENT 27 #define BCMXCP_ALARM_DC_LINK_OVER_VOLTAGE 28 #define BCMXCP_ALARM_DC_LINK_UNDER_VOLTAGE 29 #define BCMXCP_ALARM_RECTIFIER_FAILED 30 #define BCMXCP_ALARM_INVERTER_FAULT 31 #define BCMXCP_ALARM_BATTERY_CONNECTOR_FAIL 32 #define BCMXCP_ALARM_BYPASS_BREAKER_FAIL 33 #define BCMXCP_ALARM_CHARGER_FAIL 34 #define BCMXCP_ALARM_RAMP_UP_FAILED 35 #define BCMXCP_ALARM_STATIC_SWITCH_FAILED 36 #define BCMXCP_ALARM_ANALOG_AD_REF_FAIL 37 #define BCMXCP_ALARM_BYPASS_UNCALIBRATED 38 #define BCMXCP_ALARM_RECTIFIER_UNCALIBRATED 39 #define BCMXCP_ALARM_OUTPUT_UNCALIBRATED 40 #define BCMXCP_ALARM_INVERTER_UNCALIBRATED 41 #define BCMXCP_ALARM_DC_VOLT_UNCALIBRATED 42 #define BCMXCP_ALARM_OUTPUT_CURRENT_UNCALIBRATED 43 #define BCMXCP_ALARM_RECTIFIER_CURRENT_UNCALIBRATED 44 #define BCMXCP_ALARM_BATTERY_CURRENT_UNCALIBRATED 45 #define BCMXCP_ALARM_INVERTER_ON_OFF_STAT_FAIL 46 #define BCMXCP_ALARM_BATTERY_CURRENT_LIMIT 47 #define BCMXCP_ALARM_INVERTER_STARTUP_FAIL 48 #define BCMXCP_ALARM_ANALOG_BOARD_AD_STAT_FAIL 49 #define BCMXCP_ALARM_OUTPUT_CURRENT_OVER_100 50 #define BCMXCP_ALARM_BATTERY_GROUND_FAULT 51 #define BCMXCP_ALARM_WAITING_FOR_CHARGER_SYNC 52 #define BCMXCP_ALARM_NV_RAM_FAIL 53 #define BCMXCP_ALARM_ANALOG_BOARD_AD_TIMEOUT 54 #define BCMXCP_ALARM_SHUTDOWN_IMMINENT 55 #define BCMXCP_ALARM_BATTERY_LOW 56 #define BCMXCP_ALARM_UTILITY_FAIL 57 #define BCMXCP_ALARM_OUTPUT_SHORT_CIRCUIT 58 #define BCMXCP_ALARM_UTILITY_NOT_PRESENT 59 #define BCMXCP_ALARM_FULL_TIME_CHARGING 60 #define BCMXCP_ALARM_FAST_BYPASS_COMMAND 61 #define BCMXCP_ALARM_AD_ERROR 62 #define BCMXCP_ALARM_INTERNAL_COM_FAIL 63 #define BCMXCP_ALARM_RECTIFIER_SELFTEST_FAIL 64 #define BCMXCP_ALARM_RECTIFIER_EEPROM_FAIL 65 #define BCMXCP_ALARM_RECTIFIER_EPROM_FAIL 66 #define BCMXCP_ALARM_INPUT_LINE_VOLTAGE_LOSS 67 #define BCMXCP_ALARM_BATTERY_DC_OVER_VOLTAGE 68 #define BCMXCP_ALARM_POWER_SUPPLY_OVER_TEMP 69 #define BCMXCP_ALARM_POWER_SUPPLY_FAIL 70 #define BCMXCP_ALARM_POWER_SUPPLY_5V_FAIL 71 #define BCMXCP_ALARM_POWER_SUPPLY_12V_FAIL 72 #define BCMXCP_ALARM_HEATSINK_OVER_TEMP 73 #define BCMXCP_ALARM_HEATSINK_TEMP_SENSOR_FAIL 74 #define BCMXCP_ALARM_RECTIFIER_CURRENT_OVER_125 75 #define BCMXCP_ALARM_RECTIFIER_FAULT_INTERRUPT_FAIL 76 #define BCMXCP_ALARM_RECTIFIER_POWER_CAPACITOR_FAIL 77 #define BCMXCP_ALARM_RECTIFIER_POWER_CAPASITOR_FAIL 77 /* Legacy - typo */ #define BCMXCP_ALARM_INVERTER_PROGRAM_STACK_ERROR 78 #define BCMXCP_ALARM_INVERTER_BOARD_SELFTEST_FAIL 79 #define BCMXCP_ALARM_INVERTER_AD_SELFTEST_FAIL 80 #define BCMXCP_ALARM_INVERTER_RAM_SELFTEST_FAIL 81 #define BCMXCP_ALARM_NV_MEMORY_CHECKSUM_FAIL 82 #define BCMXCP_ALARM_PROGRAM_CHECKSUM_FAIL 83 #define BCMXCP_ALARM_INVERTER_CPU_SELFTEST_FAIL 84 #define BCMXCP_ALARM_NETWORK_NOT_RESPONDING 85 #define BCMXCP_ALARM_FRONT_PANEL_SELFTEST_FAIL 86 #define BCMXCP_ALARM_NODE_EEPROM_VERIFICATION_ERROR 87 #define BCMXCP_ALARM_OUTPUT_AC_OVER_VOLT_TEST_FAIL 88 #define BCMXCP_ALARM_OUTPUT_DC_OVER_VOLTAGE 89 #define BCMXCP_ALARM_INPUT_PHASE_ROTATION_ERROR 90 #define BCMXCP_ALARM_INVERTER_RAMP_UP_TEST_FAILED 91 #define BCMXCP_ALARM_INVERTER_OFF_COMMAND 92 #define BCMXCP_ALARM_INVERTER_ON_COMMAND 93 #define BCMXCP_ALARM_TO_BYPASS_COMMAND 94 #define BCMXCP_ALARM_FROM_BYPASS_COMMAND 95 #define BCMXCP_ALARM_AUTO_MODE_COMMAND 96 #define BCMXCP_ALARM_EMERGENCY_SHUTDOWN_COMMAND 97 #define BCMXCP_ALARM_SETUP_SWITCH_OPEN 98 #define BCMXCP_ALARM_INVERTER_OVER_VOLT_INT 99 #define BCMXCP_ALARM_INVERTER_UNDER_VOLT_INT 100 #define BCMXCP_ALARM_ABSOLUTE_DCOV_ACOV 101 #define BCMXCP_ALARM_PHASE_A_CURRENT_LIMIT 102 #define BCMXCP_ALARM_PHASE_B_CURRENT_LIMIT 103 #define BCMXCP_ALARM_PHASE_C_CURRENT_LIMIT 104 #define BCMXCP_ALARM_BYPASS_NOT_AVAILABLE 105 #define BCMXCP_ALARM_RECTIFIER_BREAKER_OPEN 106 #define BCMXCP_ALARM_BATTERY_CONTACTOR_OPEN 107 #define BCMXCP_ALARM_INVERTER_CONTACTOR_OPEN 108 #define BCMXCP_ALARM_BYPASS_BREAKER_OPEN 109 #define BCMXCP_ALARM_INV_BOARD_ACOV_INT_TEST_FAIL 110 #define BCMXCP_ALARM_INVERTER_OVER_TEMP_TRIP 111 #define BCMXCP_ALARM_INV_BOARD_ACUV_INT_TEST_FAIL 112 #define BCMXCP_ALARM_INVERTER_VOLTAGE_FEEDBACK_ERROR 113 #define BCMXCP_ALARM_DC_UNDER_VOLTAGE_TIMEOUT 114 #define BCMXCP_ALARM_AC_UNDER_VOLTAGE_TIMEOUT 115 #define BCMXCP_ALARM_DC_UNDER_VOLTAGE_WHILE_CHARGE 116 #define BCMXCP_ALARM_INVERTER_VOLTAGE_BIAS_ERROR 117 #define BCMXCP_ALARM_RECTIFIER_PHASE_ROTATION 118 #define BCMXCP_ALARM_BYPASS_PHASER_ROTATION 119 #define BCMXCP_ALARM_SYSTEM_INTERFACE_BOARD_FAIL 120 #define BCMXCP_ALARM_PARALLEL_BOARD_FAIL 121 #define BCMXCP_ALARM_LOST_LOAD_SHARING_PHASE_A 122 #define BCMXCP_ALARM_LOST_LOAD_SHARING_PHASE_B 123 #define BCMXCP_ALARM_LOST_LOAD_SHARING_PHASE_C 124 #define BCMXCP_ALARM_DC_OVER_VOLTAGE_TIMEOUT 125 #define BCMXCP_ALARM_BATTERY_TOTALLY_DISCHARGED 126 #define BCMXCP_ALARM_INVERTER_PHASE_BIAS_ERROR 127 #define BCMXCP_ALARM_INVERTER_VOLTAGE_BIAS_ERROR_2 128 #define BCMXCP_ALARM_DC_LINK_BLEED_COMPLETE 129 #define BCMXCP_ALARM_LARGE_CHARGER_INPUT_CURRENT 130 #define BCMXCP_ALARM_INV_VOLT_TOO_LOW_FOR_RAMP_LEVEL 131 #define BCMXCP_ALARM_LOSS_OF_REDUNDANCY 132 #define BCMXCP_ALARM_LOSS_OF_SYNC_BUS 133 #define BCMXCP_ALARM_RECTIFIER_BREAKER_SHUNT_TRIP 134 #define BCMXCP_ALARM_LOSS_OF_CHARGER_SYNC 135 #define BCMXCP_ALARM_INVERTER_LOW_LEVEL_TEST_TIMEOUT 136 #define BCMXCP_ALARM_OUTPUT_BREAKER_OPEN 137 #define BCMXCP_ALARM_CONTROL_POWER_ON 138 #define BCMXCP_ALARM_INVERTER_ON 139 #define BCMXCP_ALARM_CHARGER_ON 140 #define BCMXCP_ALARM_BYPASS_ON 141 #define BCMXCP_ALARM_BYPASS_POWER_LOSS 142 #define BCMXCP_ALARM_ON_MANUAL_BYPASS 143 #define BCMXCP_ALARM_BYPASS_MANUAL_TURN_OFF 144 #define BCMXCP_ALARM_INVERTER_BLEEDING_DC_LINK_VOLT 145 #define BCMXCP_ALARM_CPU_ISR_ERROR 146 #define BCMXCP_ALARM_SYSTEM_ISR_RESTART 147 #define BCMXCP_ALARM_PARALLEL_DC 148 #define BCMXCP_ALARM_BATTERY_NEEDS_SERVICE 149 #define BCMXCP_ALARM_BATTERY_CHARGING 150 #define BCMXCP_ALARM_BATTERY_NOT_CHARGED 151 #define BCMXCP_ALARM_DISABLED_BATTERY_TIME 152 #define BCMXCP_ALARM_SERIES_7000_ENABLE 153 #define BCMXCP_ALARM_OTHER_UPS_ON 154 #define BCMXCP_ALARM_PARALLEL_INVERTER 155 #define BCMXCP_ALARM_UPS_IN_PARALLEL 156 #define BCMXCP_ALARM_OUTPUT_BREAKER_REALY_FAIL 157 #define BCMXCP_ALARM_CONTROL_POWER_OFF 158 #define BCMXCP_ALARM_LEVEL_2_OVERLOAD_PHASE_A 159 #define BCMXCP_ALARM_LEVEL_2_OVERLOAD_PHASE_B 160 #define BCMXCP_ALARM_LEVEL_2_OVERLOAD_PHASE_C 161 #define BCMXCP_ALARM_LEVEL_3_OVERLOAD_PHASE_A 162 #define BCMXCP_ALARM_LEVEL_3_OVERLOAD_PHASE_B 163 #define BCMXCP_ALARM_LEVEL_3_OVERLOAD_PHASE_C 164 #define BCMXCP_ALARM_LEVEL_4_OVERLOAD_PHASE_A 165 #define BCMXCP_ALARM_LEVEL_4_OVERLOAD_PHASE_B 166 #define BCMXCP_ALARM_LEVEL_4_OVERLOAD_PHASE_C 167 #define BCMXCP_ALARM_UPS_ON_BATTERY 168 #define BCMXCP_ALARM_UPS_ON_BYPASS 169 #define BCMXCP_ALARM_LOAD_DUMPED 170 #define BCMXCP_ALARM_LOAD_ON_INVERTER 171 #define BCMXCP_ALARM_UPS_ON_COMMAND 172 #define BCMXCP_ALARM_UPS_OFF_COMMAND 173 #define BCMXCP_ALARM_LOW_BATTERY_SHUTDOWN 174 #define BCMXCP_ALARM_AUTO_ON_ENABLED 175 #define BCMXCP_ALARM_SOFTWARE_INCOMPABILITY_DETECTED 176 #define BCMXCP_ALARM_INVERTER_TEMP_SENSOR_FAILED 177 #define BCMXCP_ALARM_DC_START_OCCURED 178 #define BCMXCP_ALARM_IN_PARALLEL_OPERATION 179 #define BCMXCP_ALARM_SYNCING_TO_BYPASS 180 #define BCMXCP_ALARM_RAMPING_UPS_UP 181 #define BCMXCP_ALARM_INVERTER_ON_DELAY 182 #define BCMXCP_ALARM_CHARGER_ON_DELAY 183 #define BCMXCP_ALARM_WAITING_FOR_UTIL_INPUT 184 #define BCMXCP_ALARM_CLOSE_BYPASS_BREAKER 185 #define BCMXCP_ALARM_TEMPORARY_BYPASS_OPERATION 186 #define BCMXCP_ALARM_SYNCING_TO_OUTPUT 187 #define BCMXCP_ALARM_BYPASS_FAILURE 188 #define BCMXCP_ALARM_AUTO_OFF_COMMAND_EXECUTED 189 #define BCMXCP_ALARM_AUTO_ON_COMMAND_EXECUTED 190 #define BCMXCP_ALARM_BATTERY_TEST_FAILED 191 #define BCMXCP_ALARM_FUSE_FAIL 192 #define BCMXCP_ALARM_FAN_FAIL 193 #define BCMXCP_ALARM_SITE_WIRING_FAULT 194 #define BCMXCP_ALARM_BACKFEED_CONTACTOR_FAIL 195 #define BCMXCP_ALARM_ON_BUCK 196 #define BCMXCP_ALARM_ON_BOOST 197 #define BCMXCP_ALARM_ON_DOUBLE_BOOST 198 #define BCMXCP_ALARM_BATTERIES_DISCONNECTED 199 #define BCMXCP_ALARM_UPS_CABINET_OVER_TEMP 200 #define BCMXCP_ALARM_TRANSFORMER_OVER_TEMP 201 #define BCMXCP_ALARM_AMBIENT_UNDER_TEMP 202 #define BCMXCP_ALARM_AMBIENT_OVER_TEMP 203 #define BCMXCP_ALARM_CABINET_DOOR_OPEN 204 #define BCMXCP_ALARM_CABINET_DOOR_OPEN_VOLT_PRESENT 205 #define BCMXCP_ALARM_AUTO_SHUTDOWN_PENDING 206 #define BCMXCP_ALARM_TAP_SWITCHING_REALY_PENDING 207 #define BCMXCP_ALARM_UNABLE_TO_CHARGE_BATTERIES 208 #define BCMXCP_ALARM_STARTUP_FAILURE_CHECK_EPO 209 #define BCMXCP_ALARM_AUTOMATIC_STARTUP_PENDING 210 #define BCMXCP_ALARM_MODEM_FAILED 211 #define BCMXCP_ALARM_INCOMING_MODEM_CALL_STARTED 212 #define BCMXCP_ALARM_OUTGOING_MODEM_CALL_STARTED 213 #define BCMXCP_ALARM_MODEM_CONNECTION_ESTABLISHED 214 #define BCMXCP_ALARM_MODEM_CALL_COMPLETED_SUCCESS 215 #define BCMXCP_ALARM_MODEM_CALL_COMPLETED_FAIL 216 #define BCMXCP_ALARM_INPUT_BREAKER_FAIL 217 #define BCMXCP_ALARM_SYSINIT_IN_PROGRESS 218 #define BCMXCP_ALARM_AUTOCALIBRATION_FAIL 219 #define BCMXCP_ALARM_SELECTIVE_TRIP_OF_MODULE 220 #define BCMXCP_ALARM_INVERTER_OUTPUT_FAILURE 221 #define BCMXCP_ALARM_ABNORMAL_OUTPUT_VOLT_AT_STARTUP 222 #define BCMXCP_ALARM_RECTIFIER_OVER_TEMP 223 #define BCMXCP_ALARM_CONFIG_ERROR 224 #define BCMXCP_ALARM_REDUNDANCY_LOSS_DUE_TO_OVERLOAD 225 #define BCMXCP_ALARM_ON_ALTERNATE_AC_SOURCE 226 #define BCMXCP_ALARM_IN_HIGH_EFFICIENCY_MODE 227 #define BCMXCP_ALARM_SYSTEM_NOTICE_ACTIVE 228 #define BCMXCP_ALARM_SYSTEM_ALARM_ACTIVE 229 #define BCMXCP_ALARM_ALTERNATE_POWER_SOURCE_NOT_AVAILABLE 230 #define BCMXCP_ALARM_CURRENT_BALANCE_FAILURE 231 #define BCMXCP_ALARM_CHECK_AIR_FILTER 232 #define BCMXCP_ALARM_SUBSYSTEM_NOTICE_ACTIVE 233 #define BCMXCP_ALARM_SUBSYSTEM_ALARM_ACTIVE 234 #define BCMXCP_ALARM_CHARGER_ON_COMMAND 235 #define BCMXCP_ALARM_CHARGER_OFF_COMMAND 236 #define BCMXCP_ALARM_UPS_NORMAL 237 #define BCMXCP_ALARM_INVERTER_PHASE_ROTATION 238 #define BCMXCP_ALARM_UPS_OFF 239 #define BCMXCP_ALARM_EXTERNAL_COMMUNICATION_FAILURE 240 #define BCMXCP_ALARM_BATTERY_TEST_INPROGRESS 256 #define BCMXCP_ALARM_SYSTEM_TEST_INPROGRESS 257 #define BCMXCP_ALARM_BATTERY_TEST_ABORTED 258 #define BCMXCP_COMMAND_MAP_MAX 208 /* Max no of entries in BCM/XCP meter map (adjusted upwards to nearest multi of 8) */ #define BCMXCP_METER_MAP_MAX 136 /* Max no of entries in BCM/XCP meter map (adjusted upwards to nearest multi of 8) */ #define BCMXCP_ALARM_MAP_MAX 264 /* Max no of entries in BCM/XCP alarm map (adjusted upwards to nearest multi of 8) */ /* Return codes for XCP ACK block responses */ #define BCMXCP_RETURN_ACCEPTED 0x31 /* Accepted and executed (or execution in progress) */ #define BCMXCP_RETURN_NOT_IMPLEMENTED 0x32 /* Recognized but not implemented */ #define BCMXCP_RETURN_BUSY 0x33 /* Recognized but not currently able to execute (busy) */ #define BCMXCP_RETURN_UNRECOGNISED 0x34 /* Unrecognized -- e.g., command byte not in valid range, or command has been corrupted (bad checksum) */ #define BCMXCP_RETURN_PARAMETER_OUT_OF_RANGE 0x35 /* Command recognized, but its Parameter value is out of range */ #define BCMXCP_RETURN_INVALID_PARAMETER 0x36 /* Command recognized, but its Parameter is invalid (e.g., no such parameter, bad Outlet number) */ #define BCMXCP_RETURN_ACCEPTED_PARAMETER_ADJUST 0x37 /* Accepted, with parameter adjusted to nearest good value */ /*#define BCMXCP_RETURN_READONLY 0x38 */ /* Parameter is Read-only - cannot be written (at this privilege level) (this is not listed in spec document */ /* UPS status */ #define BCMXCP_STATUS_ONLINE 0x50 #define BCMXCP_STATUS_ONBATTERY 0xf0 #define BCMXCP_STATUS_OVERLOAD 0xe0 #define BCMXCP_STATUS_TRIM 0x63 #define BCMXCP_STATUS_BOOST1 0x61 #define BCMXCP_STATUS_BOOST2 0x62 #define BCMXCP_STATUS_BYPASS 0x60 #define BCMXCP_STATUS_OFF 0x10 /* UPS topology block info */ #define BCMXCP_TOPOLOGY_NONE 0x0000 /* None; use the Table of Elements */ #define BCMXCP_TOPOLOGY_OFFLINE_SWITCHER_1P 0x0010 /* Off-line switcher, Single Phase */ #define BCMXCP_TOPOLOGY_LINEINT_UPS_1P 0x0020 /* Line-Interactive UPS, Single Phase */ #define BCMXCP_TOPOLOGY_LINEINT_UPS_2P 0x0021 /* Line-Interactive UPS, Two Phase */ #define BCMXCP_TOPOLOGY_LINEINT_UPS_3P 0x0022 /* Line-Interactive UPS, Three Phase */ #define BCMXCP_TOPOLOGY_DUAL_AC_ONLINE_UPS_1P 0x0030 /* Dual AC Input, On-Line UPS, Single Phase */ #define BCMXCP_TOPOLOGY_DUAL_AC_ONLINE_UPS_2P 0x0031 /* Dual AC Input, On-Line UPS, Two Phase */ #define BCMXCP_TOPOLOGY_DUAL_AC_ONLINE_UPS_3P 0x0032 /* Dual AC Input, On-Line UPS, Three Phase */ #define BCMXCP_TOPOLOGY_ONLINE_UPS_1P 0x0040 /* On-Line UPS, Single Phase */ #define BCMXCP_TOPOLOGY_ONLINE_UPS_2P 0x0041 /* On-Line UPS, Two Phase */ #define BCMXCP_TOPOLOGY_ONLINE_UPS_3P 0x0042 /* On-Line UPS, Three Phase */ #define BCMXCP_TOPOLOGY_PARA_REDUND_ONLINE_UPS_1P 0x0050 /* Parallel Redundant On-Line UPS, Single Phase */ #define BCMXCP_TOPOLOGY_PARA_REDUND_ONLINE_UPS_2P 0x0051 /* Parallel Redundant On-Line UPS, Two Phase */ #define BCMXCP_TOPOLOGY_PARA_REDUND_ONLINE_UPS_3P 0x0052 /* Parallel Redundant On-Line UPS, Three Phase */ #define BCMXCP_TOPOLOGY_PARA_CAPACITY_ONLINE_UPS_1P 0x0060 /* Parallel for Capacity On-Line UPS, Single Phase */ #define BCMXCP_TOPOLOGY_PARA_CAPACITY_ONLINE_UPS_2P 0x0061 /* Parallel for Capacity On-Line UPS, Two Phase */ #define BCMXCP_TOPOLOGY_PARA_CAPACITY_ONLINE_UPS_3P 0x0062 /* Parallel for Capacity On-Line UPS, Three Phase */ #define BCMXCP_TOPOLOGY_SYSTEM_BYPASS_MODULE_3P 0x0102 /* System Bypass Module, Three Phase */ #define BCMXCP_TOPOLOGY_HOT_TIE_CABINET_3P 0x0122 /* Hot-Tie Cabinet, Three Phase */ #define BCMXCP_TOPOLOGY_OUTLET_CONTROLLER_1P 0x0200 /* Outlet Controller, Single Phase */ #define BCMXCP_TOPOLOGY_DUAL_AC_STATIC_SWITCH_3P 0x0222 /* Dual AC Input Static Switch Module, 3 Phase */ typedef struct { /* Entry in BCM/XCP - UPS mapping table */ const char *command_desc; /* Description of this command */ unsigned char command_byte; /* The command byte for this command, 0 = not supported */ } BCMXCP_COMMAND_MAP_ENTRY_t; extern BCMXCP_COMMAND_MAP_ENTRY_t bcmxcp_command_map[BCMXCP_COMMAND_MAP_MAX]; typedef struct { /* Entry in BCM/XCP - UPS - NUT mapping table */ const char *nut_entity; /* The NUT variable name */ unsigned char format; /* The format of the data - float, long etc */ unsigned int meter_block_index; /* The position of this meter in the UPS meter block */ } BCMXCP_METER_MAP_ENTRY_t; extern BCMXCP_METER_MAP_ENTRY_t bcmxcp_meter_map[BCMXCP_METER_MAP_MAX]; typedef struct { /* Entry in BCM/XCP - UPS mapping table */ int alarm_block_index; /* Index of this alarm in alarm block. -1 = not existing */ const char *alarm_desc; /* Description of this alarm */ } BCMXCP_ALARM_MAP_ENTRY_t; extern BCMXCP_ALARM_MAP_ENTRY_t bcmxcp_alarm_map[BCMXCP_ALARM_MAP_MAX]; typedef struct { /* A place to store status info and other data not for NUT */ unsigned char topology_mask; /* Configuration block byte 16, masks valid status bits */ unsigned int lowbatt; /* Seconds of runtime left left when LB alarm is set */ unsigned int shutdowndelay; /* Shutdown delay in seconds, from ups.conf */ int alarm_on_battery; /* On Battery alarm active? */ int alarm_low_battery; /* Battery Low alarm active? */ int alarm_replace_battery; /* Battery needs replacement! */ } BCMXCP_STATUS_t; extern BCMXCP_STATUS_t bcmxcp_status; int checksum_test(const unsigned char*); unsigned char calc_checksum(const unsigned char *buf); /* from usbhid-ups.h */ typedef struct { const long xcp_value; /* XCP value */ const char *nut_value; /* NUT value */ const char *(*fun)(double xcp_value); /* optional XCP to NUT mapping */ double (*nuf)(const char *nut_value); /* optional NUT to HID mapping */ } info_lkp_t; /* use explicit booleans */ #ifndef FALSE typedef enum ebool { FALSE, TRUE } bool_t; #else typedef int bool_t; #endif #endif /*_POWERWARE_H */