'\" t
.\"     Title: adelsystem_cbi
.\"    Author: [see the "AUTHOR" section]
.\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
.\"      Date: 04/26/2022
.\"    Manual: NUT Manual
.\"    Source: Network UPS Tools 2.8.0
.\"  Language: English
.\"
.TH "ADELSYSTEM_CBI" "8" "04/26/2022" "Network UPS Tools 2\&.8\&.0" "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el       .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
adelsystem_cbi \- Driver for the ADELSYSTEM CB/CBI DC\-UPS
.SH "SYNOPSIS"
.sp
\fBadelsystem_cbi\fR \-h
.sp
\fBadelsystem_cbi\fR \-a \fIDEVICE_NAME\fR [\fIOPTIONS\fR]
.if n \{\
.sp
.\}
.RS 4
.it 1 an-trap
.nr an-no-space-flag 1
.nr an-break-flag 1
.br
.ps +1
\fBNote\fR
.ps -1
.br
.sp
This man page only documents the specific features of the \fBadelsystem_cbi\fR driver\&. For information about the core driver, see \fBnutupsdrv\fR(8)\&.
.sp .5v
.RE
.SH "SUPPORTED HARDWARE"
.sp
This is the driver for the adelsystem cb/cbi dc\-ups devices\&.
.sp
The driver has been tested against CBI2801224A, all in one 12/24Vdc DC\-UPS\&.
.PP
More information about this UPS can be found here:
.RS 4
https://www\&.adelsystem\&.com/en/products/dc\-ups\-/
.RE
.SH "EXTRA ARGUMENTS"
.sp
This driver supports the following optional settings in the \fBups.conf\fR(5) file:
.SS "Serial:"
.PP
\fBser_baud_rate\fR=\fIvalue\fR
.RS 4
A integer specifying the serial port baud rate (default 9600)\&.
.RE
.PP
\fBser_data_bit\fR=\fIvalue\fR
.RS 4
A integer specifying the serial port data bit (default 8)\&.
.RE
.PP
\fBser_parity\fR=\fIvalue\fR
.RS 4
A character specifying the serial port parity (default N)\&.
.RE
.PP
\fBser_stop_bit\fR=\fIvalue\fR
.RS 4
An integer specifying the serial port stop bit (default 1)\&.
.RE
.SS "Modbus:"
.PP
\fBdev_slave_id\fR=\fIvalue\fR
.RS 4
An integer specifying the device modbus slave ID (default 1)\&.
.RE
.SH "CONFIGURATION"
.sp
Here is an example of adelsystem_cbi driver configuration in \fBups\&.conf\fR file:
.sp
.if n \{\
.RS 4
.\}
.nf
[adelsystem_cbi]
  driver = adelsystem_cbi
  port = /dev/ttyUSB0
  desc = "adelsystem cb/cbi ups driver"
  # serial settings
  ser_baud_rate = 9600
  ser_parity = N
  ser_data_bit = 8
  ser_stop_bit = 1
  # modbus slave id
  dev_slave_id = 5
.fi
.if n \{\
.RE
.\}
.SH "INSTANT COMMANDS"
.sp
This driver support the following instant commands:
.PP
load\&.off
.RS 4
executes "instant poweroff"
.RE
.SH "INSTALLATION"
.sp
This driver is not built by default\&. You can build it by installing libmodbus and running configure \-\-with\-modbus=yes\&.
.sp
You also need to give proper permissions on the local serial device file (/dev/ttyUSB0 for example) to allow the run\-time NUT driver user account to access it\&.
.SH "AUTHOR"
.sp
Dimitris Economou <dimitris\&.s\&.economou@gmail\&.com>
.SH "SEE ALSO"
.SS "The core driver:"
.sp
\fBnutupsdrv\fR(8), \fBups.conf\fR(5)
.SS "Internet resources:"
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
The NUT (Network UPS Tools) home page:
http://www\&.networkupstools\&.org/
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
libmodbus home page:
http://libmodbus\&.org
.RE