Imported Debian patch 2.6.4-2.3

debian/changelog

@@ -1,3 +1,61 @@
+nut (2.6.4-2.3) unstable; urgency=low
+
+  * Non-maintainer upload with fixes for wheezy.
+  * debian/nut-client.preinst: also revert /etc/nut/nut.conf mangling done
+    by postinst during upgrade from lenny to squeeze (Really closes: #677054)
+    Thanks to Andreas Beckmann for the review.
+
+ -- Ivo De Decker <ivo.dedecker@ugent.be>  Sat, 26 Jan 2013 20:09:48 +0100
+
+nut (2.6.4-2.2) unstable; urgency=low
+
+  * Non-maintainer upload with fixes for wheezy.
+  * Only remove /etc/init.d/nut from previous versions of nut in nut-server
+    postinst if there are no local changes.
+  * Also remove /etc/init.d/nut in nut-client postinst. Thanks to 
+    Laurent Bigonville for the hint.
+  * Only fix permissions of configfiles on first install.
+  * debian/control: Fix typo in package description. Thanks to Julien Cristau
+    for spotting this.
+
+ -- Ivo De Decker <ivo.dedecker@ugent.be>  Thu, 20 Dec 2012 20:40:01 +0100
+
+nut (2.6.4-2.1) unstable; urgency=low
+
+  * Non-maintainer upload.
+  * debian/nut-client.preinst: revert /etc/nut/nut.conf mangling done by older
+    versions of the postinst (Closes: #677054)
+
+ -- Sébastien Villemot <sebastien@debian.org>  Mon, 26 Nov 2012 21:09:33 +0100
+
+nut (2.6.4-2) unstable; urgency=low
+
+  * debian/rules: Stop the nut-client before nut-server on systems using static
+    boot ordering (Closes: #679451)
+  * debian/nut-server.postinst: Remove /etc/init.d/nut on upgrade
+    (Closes: #677822)
+  * Rename nut-server.lintian-overrides to nut-client.lintian-overrides and
+    adjust overrides now that ups-monitor is shipped in nut-client package
+    (Closes: #677947)
+  * Add debian/patches/0001-fix-upsmon-regression.patch: Fix upsmon/upssched
+    regression (Taken from upstream) (Closes: #679513)
+  * Move nut metapackage to Section: metapackages
+  * Also create nut user when installing nut-client package and do not delete
+    it on purge anymore (Closes: #682000)
+  * Drop /etc/default/nut → /etc/nut/nut.conf migration code, migration
+    happends before squeeze release and this was against policy to have a
+    maintainer script modifying a conffile in the first place (Closes: #684392)
+  * Add dependency against adduser and lsb-base on nut-client package
+  * Be sure that client is stopped before the server also when using
+    dependencies based boot
+  * Fix package descriptions (Closes: #678068)
+  * Also install /bin/upssched-cmd in nut-client package as this script is
+    referenced in default upssched.conf config file
+  * debian/watch: Update watch file
+  * Be sure that all maintainer scripts are returning 0 at their end
+
+ -- Laurent Bigonville <bigon@debian.org>  Sun, 12 Aug 2012 20:38:52 +0200
+
 nut (2.6.4-1) unstable; urgency=high
 
   * New upstream release (Closes: #671444)

debian/control

@@ -24,6 +24,7 @@ X-Python-Version: >= 2.5
 
 Package: nut
 Architecture: all
+Section: metapackages
 Depends: ${misc:Depends}, nut-server, nut-client
 Description: network UPS tools - metapackage
  Network UPS Tools (NUT) is a client/server monitoring system that
@@ -32,7 +33,8 @@ Description: network UPS tools - metapackage
  through the server, and are notified whenever the power status
  changes.
  .
- This package is a metapackage that install both nut-server and nut-client
+ This package is a metapackage that installs both nut-server and nut-client,
+ in most cases it is sufficient for a basic UPS monitoring system.
 
 Package: nut-server
 Architecture: any
@@ -50,12 +52,11 @@ Description: network UPS tools - core system
  changes.
  .
  This package provides NUT's core system, and the serial and USB UPS
- drivers. In most cases it is sufficient for a basic UPS monitoring
+ drivers.
- system.
 
 Package: nut-client
 Architecture: any
-Depends: ${shlibs:Depends}, ${misc:Depends}
+Depends: ${shlibs:Depends}, ${misc:Depends}, adduser, lsb-base (>= 3.0-6)
 Provides: ups-monitor
 Conflicts: ups-monitor, nut-server (<< 2.6.3-1)
 Recommends: bash-completion

debian/gbp.conf

@@ -1,6 +1,6 @@
 [DEFAULT]
-debian-branch = debian
+debian-branch = debian-wheezy
-upstream-branch = upstream
+upstream-branch = upstream-wheezy
 pristine-tar = True
 
 [git-buildpackage]

debian/nut-cgi.postrm

@@ -44,3 +44,4 @@ esac
 
 #DEBHELPER#
 
+exit 0

debian/nut-client.install

@@ -4,6 +4,7 @@ debian/tmp/bin/upsrw
 debian/tmp/bin/upscmd
 debian/tmp/sbin/upsmon
 debian/tmp/sbin/upssched
+debian/tmp/bin/upssched-cmd
 debian/tmp/etc/bash_completion.d/nut
 debian/tmp/etc/nut/nut.conf
 debian/tmp/etc/nut/upsmon.conf

debian/nut-client.lintian-overrides

@@ -0,0 +1 @@
+nut-client: script-in-etc-init.d-not-registered-via-update-rc.d

debian/nut-client.postinst

@@ -0,0 +1,76 @@
+#!/bin/sh -e
+
+case "$1" in
+
+  configure)
+
+    # make sure the nut user exists and has correct memberships
+    if ! getent group nut >/dev/null; then
+      addgroup --quiet --system nut
+    fi
+    if ! getent passwd nut >/dev/null; then
+      adduser --quiet --system --ingroup nut --home /var/lib/nut --no-create-home nut
+    elif ! groups nut | grep -qw nut; then
+      adduser nut nut
+    fi
+# for Ubuntu, while waiting for a proper debconf
+#    if ! groups nut | grep -qw dialout; then
+#	adduser nut dialout
+#    fi
+
+    # make sure that conffiles are secured and have the correct ownerships
+    # on first install
+    if [ -z "$2" ] ; then
+        if [ -d /etc/nut/ ] ; then
+          chown root:nut /etc/nut/
+        fi
+        for file in nut.conf upsmon.conf upssched.conf ; do
+            if [ -f /etc/nut/$file ] ; then
+                chown root:nut /etc/nut/$file
+                chmod 640 /etc/nut/$file
+            fi
+        done
+    fi
+
+    # make sure that /var/run/nut exists and has the correct ownerships
+    if [ ! -d /var/run/nut ] ; then
+        mkdir -p /var/run/nut
+    fi
+    if [ -d /var/run/nut ] ; then
+        chown root:nut /var/run/nut
+        chmod 770 /var/run/nut
+    fi
+
+    if dpkg --compare-versions "$2" le "2.6.4-2~" &&
+      [ -f /etc/init.d/nut ] ; then
+        if [ "`md5sum /etc/init.d/nut | cut -d ' ' -f 1`" = 72f1dbc6b92cb4407f26605d05b12681 ]; then
+            rm -f /etc/init.d/nut
+        else
+            mv /etc/init.d/nut /etc/init.d/nut.dpkg-old
+        fi
+        update-rc.d nut remove >/dev/null
+    fi
+    ;;
+
+  abort-upgrade)
+    # do nothing
+    ;;
+
+  abort-remove)
+    # do nothing
+    ;;
+
+  abort-deconfigure)
+    # do nothing
+    ;;
+
+  *)
+    echo "$0: incorrect arguments: $*" >&2
+    exit 1
+    ;;
+
+esac
+
+#DEBHELPER#
+
+exit 0

debian/nut-client.preinst

@@ -0,0 +1,23 @@
+#!/bin/sh
+
+set -e
+
+# Revert /etc/nut/nut.conf mangling done by older versions of the postinst
+# See #677054
+# changed configfile created by a fresh install in lenny, upgraded to squeeze
+if [ "$1" = "install" -o "$1" = "upgrade" ] \
+    && dpkg --compare-versions "$2" lt "2.6.4-2" \
+    && [ -f /etc/nut/nut.conf ] \
+    && [ "`md5sum /etc/nut/nut.conf | cut -d ' ' -f 1`" = 331cca39153f451c2968f4b734c1cf3f ]; then
+	sed -i '29,$ d' /etc/nut/nut.conf
+fi
+
+# changed configfile created by a fresh install in squeeze
+if [ "$1" = "install" -o "$1" = "upgrade" ] \
+    && dpkg --compare-versions "$2" lt "2.6.4-2" \
+    && [ -f /etc/nut/nut.conf ] \
+    && [ "`md5sum /etc/nut/nut.conf | cut -d ' ' -f 1`" = f9b571ae65952e3a761fac2202633478 ]; then
+    sed -i 's/^MODE=none$/MODE = none/' /etc/nut/nut.conf
+fi
+
+#DEBHELPER#

debian/nut-server.init

@@ -2,7 +2,7 @@
 ### BEGIN INIT INFO
 # Provides:          nut-server upsd
 # Required-Start:    $local_fs $syslog $network $remote_fs udev
-# Required-Stop:     $local_fs $syslog $network $remote_fs udev nut-client
+# Required-Stop:     $local_fs $syslog $network $remote_fs udev
 # Default-Start:     2 3 4 5
 # Default-Stop:      0 1 6
 # Short-Description: Network UPS Tools initscript

debian/nut-server.lintian-overrides

@@ -1,2 +0,0 @@
-nut-server: script-in-etc-init.d-not-registered-via-update-rc.d
-nut-server: init.d-script-does-not-provide-itself etc/init.d/ups-monitor

debian/nut-server.postinst

@@ -19,15 +19,18 @@ case "$1" in
 #    fi
 
     # make sure that conffiles are secured and have the correct ownerships
+    # on first install
+    if [ -z "$2" ] ; then
         if [ -d /etc/nut/ ] ; then
           chown root:nut /etc/nut/
         fi
-    for file in nut.conf ups.conf upsd.conf upsmon.conf upsd.users upssched.conf ; do
+        for file in ups.conf upsd.conf upsd.users ; do
             if [ -f /etc/nut/$file ] ; then
                 chown root:nut /etc/nut/$file
                 chmod 640 /etc/nut/$file
             fi
         done
+    fi
 
     # make sure that /var/run/nut exists and has the correct ownerships
     if [ ! -d /var/run/nut ] ; then
@@ -50,67 +53,14 @@ case "$1" in
 
     # 557178  udevadm trigger --subsystem-match=usb
 
-    # migrate /etc/default/nut to /etc/nut/nut.conf (part #2)
+    if dpkg --compare-versions "$2" le "2.6.4-2~" &&
-    if dpkg --compare-versions "$2" lt-nl "2.4.1-2" ; then
+      [ -f /etc/init.d/nut ] ; then
-      # source the temporary /etc/default/nut.bak file
+        if [ "`md5sum /etc/init.d/nut | cut -d ' ' -f 1`" = 72f1dbc6b92cb4407f26605d05b12681 ]; then
-      if [ -f /etc/default/nut.bak ] ; then
+            rm -f /etc/init.d/nut
-        . /etc/default/nut.bak
-
-        # FIXME: use a template (and debconf to output?)
-        echo "migrating /etc/default/nut to /etc/nut/nut.conf"
-
-        # pre process the config
-        case "$START_UPSD" in
-          y|Y|yes|YES|Yes)
-            START_UPSD=yes
-            ;;
-          *)
-            START_UPSD=no
-            ;;
-        esac
-        case "$START_UPSMON" in
-          y|Y|yes|YES|Yes)
-            START_UPSMON=yes
-            ;;
-          *)
-            START_UPSMON=no
-            ;;
-        esac
-
-        # now process the result
-        if [ "x$START_UPSD" = "xyes" ] ; then
-          if [ "x$START_UPSMON" = "xyes" ] ; then
-            # can also be netserver
-            NUT_MODE=standalone
-          #else not processed since it should be an error!
-          fi
         else
-          if [ "x$START_UPSMON" = "xyes" ] ; then
+            mv /etc/init.d/nut /etc/init.d/nut.dpkg-old
-            NUT_MODE=netclient
-          else
-            NUT_MODE=none
         fi
-        fi
+        update-rc.d nut remove >/dev/null
-
-        # output back the MODE to nut.conf
-        sed "s/^MODE\(.*\)/MODE=$NUT_MODE/" /etc/nut/nut.conf  > /etc/nut/nut.conf.new
-
-        # append the content of default, removing START_* / start...
-        grep -iv 'START' /etc/default/nut.bak >> /etc/nut/nut.conf.new
-        # move back to nut.conf
-        mv /etc/nut/nut.conf.new /etc/nut/nut.conf
-        # and to init.d/nut
-        #if [ -f /etc/init.d/nut ] ; then
-        #  sed "s/^UPSD_OPTIONS\(.*\)/UPSD_OPTIONS=\"$UPSD_OPTIONS\"/" /etc/init.d/nut  > /etc/init.d/nut.new
-        #  sed "s/^UPSMON_OPTIONS\(.*\)/UPSMON_OPTIONS=\"$UPSMON_OPTIONS\"/" /etc/init.d/nut.new  > /etc/init.d/nut
-        #fi
-        rm -f /etc/default/nut.bak /etc/default/nut
-      fi
-    else
-      # re process nut.conf MODE so that it can be sourced
-      NUT_MODE=`grep -e '^ *MODE' /etc/nut/nut.conf | tr -d " "`
-      sed "s/^ *MODE.*/$NUT_MODE/" /etc/nut/nut.conf > /etc/nut/nut.conf.new
-      mv /etc/nut/nut.conf.new /etc/nut/nut.conf
     fi
     ;;
 
@@ -134,3 +84,5 @@ case "$1" in
 esac
 
 #DEBHELPER#
+
+exit 0

debian/nut-server.postrm

@@ -14,12 +14,6 @@ case "$1" in
     rm -f /etc/udev/rules.d/025_nut-usbups.rules
     rm -f /etc/udev/rules.d/52_nut-usbups.rules
     rm -f /etc/udev/rules.d/52-nut-usbups.rules
-    # remove the nut user
-    if [ -x "$(command -v deluser)" ]; then
-       deluser --quiet --system nut > /dev/null || true
-    else
-       echo >&2 "not removing nut system account because deluser command was not found"
-    fi
     # handle a dpkg bug
     [ -d /etc/nut ] && rmdir --ignore-fail-on-non-empty /etc/nut >/dev/null 2>&1
     ;;
@@ -53,3 +47,4 @@ esac
 
 #DEBHELPER#
 
+exit 0

debian/nut-server.preinst

@@ -5,13 +5,8 @@ if [ "$1" = upgrade ]; then
 	[ -f /etc/udev/rules.d/025_nut-usbups.rules ] && rm -f /etc/udev/rules.d/025_nut-usbups.rules
 	[ -f /etc/udev/rules.d/52_nut-usbups.rules ] && rm -f /etc/udev/rules.d/52_nut-usbups.rules
 	[ -f /etc/udev/rules.d/52-nut-usbups.rules ] && rm -f /etc/udev/rules.d/52-nut-usbups.rules
-
-	# migrate /etc/default/nut to /etc/nut/nut.conf (part #1)
-	# we need to do this before default gets trashed
-	if [ -f /etc/default/nut ] ; then
-		# backup /etc/default/nut
-		cp /etc/default/nut /etc/default/nut.bak
-	fi
 fi
 
 #DEBHELPER#
+
+exit 0

debian/patches/0001-fix-upsmon-regression.patch

@@ -0,0 +1,15 @@
+Description: Fix upsmon/upssched regression
+Origin: upstream, http://trac.networkupstools.org/projects/nut/changeset/3670
+Bug-Debian: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=679513
+
+Index: /trunk/clients/upssched.c
+===================================================================
+--- a/clients/upssched.c	(revision 3555)
++++ b/clients/upssched.c	(revision 3670)
+@@ -695,5 +695,5 @@
+ 			pconf_encode(arg2, enc, sizeof(enc)));
+ 
+-	snprintfcat(enc, sizeof(enc), "%s\n", buf);
++	snprintf(enc, sizeof(enc), "%s\n", buf);
+ 
+ 	/* see if the parent needs to be started (and maybe start it) */

debian/patches/series

@@ -1 +1,2 @@
+0001-fix-upsmon-regression.patch
 0002-nut-monitor-paths.patch

debian/rules

@@ -76,8 +76,8 @@ common-install-indep::
 binary-install/nut-monitor::
 	dh_python2 -pnut-monitor
 
-DEB_DH_INSTALLINIT_ARGS_nut-server := --init-script=nut-server -- start 50 2 3 4 5 . stop 50 0 1 6 .
+DEB_DH_INSTALLINIT_ARGS_nut-server := --init-script=nut-server -- start 50 2 3 4 5 . stop 51 0 1 6 .
-DEB_DH_INSTALLINIT_ARGS_nut-client := --init-script=nut-client -- start 51 2 3 4 5 . stop 51 0 1 6 .
+DEB_DH_INSTALLINIT_ARGS_nut-client := --init-script=nut-client -- start 51 2 3 4 5 . stop 50 0 1 6 .
 DEB_DH_COMPRESS_ARGS_nut-doc := -X.pdf
 
 ifeq (linux,$(DEB_HOST_ARCH_OS))

debian/watch

@@ -1,2 +1,2 @@
 version=3
-http://www.networkupstools.org/source/2.4/nut-(.*)\.tar\.gz debian uupdate
+http://www.networkupstools.org/source/([0-9.]+)/nut-(.*)\.tar\.gz