Imported Upstream version 2.6.1
This commit is contained in:
Arnaud Quette
parent
459aaf9392
commit
a367d9bc54
178 changed files with 4651 additions and 3279 deletions
36
docs/FAQ.txt
36
docs/FAQ.txt
|
|
@ -299,15 +299,12 @@ things depending on what's supported:
|
|||
it into powering up whenever line power is present
|
||||
- Teach a monkey to watch the machine and press the power button
|
||||
when the outage is over.
|
||||
|
||||
This might work, but it creates high produce bills.
|
||||
|
||||
If you can't use one of the first two options, give the board to
|
||||
an enemy. Let them worry about it.
|
||||
|
||||
== My PowerMac G4 won't power back up by itself (into Linux) after the UPS shuts down. What can I do about this?
|
||||
|
||||
*Answer 1*
|
||||
== My Mac won't power back up by itself into Linux after the UPS shuts down. What can I do about this?
|
||||
|
||||
This is about the same situation as the ATX question above, only
|
||||
worse. Earlier Macs apparently supported a hack where you could
|
||||
|
|
@ -324,15 +321,20 @@ From Usenet post <6boftzxz51.fsf@ecc-office.sp.cs.cmu.edu>:
|
|||
|
||||
autoboot.adb contains these three bytes (in hex): 01 13 01
|
||||
|
||||
Unfortunately, the hardware has evolved and there is no good
|
||||
equivalent for this hack on today's systems.
|
||||
Later PowerPC Macs with a PMU and the appropriate kernel driver can achieve the
|
||||
same effect with the following command:
|
||||
|
||||
If you find out how to do this, please send me some mail, since
|
||||
this affects one of my systems and my stop-gap solution is getting
|
||||
cranky.
|
||||
echo server_mode=1 > /proc/pmu/options
|
||||
|
||||
Note: this question has been in the FAQ for over a year and
|
||||
there's still no answer. Let me guess: everyone who runs a server
|
||||
The following pages have some slightly more kludgy answers which involve the
|
||||
use of `setpci`, and are highly model-specific:
|
||||
|
||||
- http://mythic-beasts.com/support/macminicolo_howto.html
|
||||
- http://superuser.com/questions/212434/reboot-after-power-failure-for-mac-running-ubuntu
|
||||
- http://ubuntuforums.org/showthread.php?t=1209576
|
||||
|
||||
Note: this question has been in the FAQ for several years now, and
|
||||
there's still no clean answer. Let me guess: everyone who runs a server
|
||||
on Mac hardware has a team of trained monkeys, and feeds them
|
||||
by growing bananas in the tropical environment formed by waste heat
|
||||
from the equipment.
|
||||
|
|
@ -341,14 +343,14 @@ The rest of us are still waiting for the answer. Booting into the
|
|||
Mac OS to frob the "file server" panel is not an acceptable
|
||||
solution.
|
||||
|
||||
*Answer 2*
|
||||
== My Mac won't power back up by itself into Mac OS X after the UPS shuts down. What can I do about this?
|
||||
|
||||
If you're on OS X, this is relatively simple to fix. Go to system
|
||||
preferences, click on energy saver, click on the options tab, check
|
||||
"Restart automatically after a power failure".
|
||||
This is relatively simple to fix. If you have console or VNC access, log in as
|
||||
an administrator, go to System Preferences, click on energy saver, click on the
|
||||
options tab, check "Restart automatically after a power failure".
|
||||
|
||||
If you're on some other OS, hope they've figured out how to duplicate
|
||||
the above in a non-simian manner.
|
||||
Alternatively, you can connect via SSH and run "sudo pmset autorestart 1" to
|
||||
achieve the same effect.
|
||||
|
||||
== I want to keep the drivers and upsd in their own security domains. How can this be accomplished?
|
||||
|
||||
|
|
|
|||
|
|
@ -38,7 +38,6 @@ subdir = docs
|
|||
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
|
||||
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
|
||||
am__aclocal_m4_deps = $(top_srcdir)/m4/ax_compare_version.m4 \
|
||||
$(top_srcdir)/m4/ax_create_stdint_h.m4 \
|
||||
$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
|
||||
$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
|
||||
$(top_srcdir)/m4/lt~obsolete.m4 \
|
||||
|
|
|
|||
|
|
@ -75,8 +75,8 @@ Build and install the upsclient library and header files.
|
|||
|
||||
--with-all (no default)
|
||||
|
||||
Build and install all of the above (the serial, USB, and SNMP
|
||||
drivers, the CGI programs and HTML files, and the upsclient
|
||||
Build and install all of the above (the serial, USB, SNMP, XML/HTTP and
|
||||
PowerMan drivers, the CGI programs and HTML files, and the upsclient
|
||||
library).
|
||||
|
||||
--with-ssl (default: auto-detect)
|
||||
|
|
|
|||
|
|
@ -53,7 +53,7 @@ These are writeups by users of the software.
|
|||
- link:http://www.dimat.unina2.it/LCS/MonitoraggioUpsNutUbuntu10-eng.htm[Deploying NUT on an Ubuntu 10.04 cluster] '(Stefano Angelone)'
|
||||
- link:http://blog.shadypixel.com/monitoring-a-ups-with-nut-on-debian-or-ubuntu-linux[Monitoring a UPS with nut on Debian or Ubuntu Linux] '(Avery Fay)'
|
||||
- link:http://linux.developpez.com/cours/upsusb/[Installation et gestion d'un UPS USB en réseau sous linux] '(Olivier Van Hoof, french)'
|
||||
- link:http://boxster.ghz.cc/projects/nut/wiki/NutOnMacOSX[Network UPS Tools (NUT) on Mac OS X (10.4.10)] '(Andy Poush)'
|
||||
- link:http://trac.networkupstools.org/projects/nut/wiki/NutOnMacOSX[Network UPS Tools (NUT) on Mac OS X (10.4.10)] '(Andy Poush)'
|
||||
- link:http://www.llondel.org/ups.shtml[Interfacing a Contact-Closure UPS to Mac OS X and Linux] '(David Hough)'
|
||||
- link:http://fedoranews.org/contributors/kazutoshi_morioka/nut/[How to use UPS with nut on RedHat / Fedora Core] '(Kazutoshi Morioka)'
|
||||
- link:http://people.freebsd.org/~thierry/nut_FreeBSD_HowTo.txt[FreeBSD installation procedure] '(Thierry Thomas, from FreeBSD)'
|
||||
|
|
|
|||
|
|
@ -23,10 +23,11 @@ to do so.
|
|||
Stable tree: 2.6
|
||||
~~~~~~~~~~~~~~~~
|
||||
|
||||
link:http://www.networkupstools.org/source/2.6/nut-2.6.0.tar.gz[nut-2.6.0.tar.gz]
|
||||
link:http://www.networkupstools.org/source/2.6/nut-2.6.0.tar.gz.sig[signature]
|
||||
link:http://www.networkupstools.org/source/2.6/new-2.6.0.txt[release notes]
|
||||
link:http://www.networkupstools.org/source/2.6/ChangeLog[ChangeLog]
|
||||
- link:http://www.networkupstools.org/source/2.6/nut-2.6.1.tar.gz[nut-2.6.1.tar.gz]
|
||||
- link:http://www.networkupstools.org/source/2.6/nut-2.6.1.tar.gz.sig[PGP/GPG signature]
|
||||
- SHA-256 sum: 4ba1d297a98190db0ae86eb31136c780f35e6d3f47ae845316b44eaa9245a86e
|
||||
- link:http://www.networkupstools.org/source/2.6/new-2.6.1.txt[Release notes]
|
||||
- link:http://www.networkupstools.org/source/2.6/ChangeLog[ChangeLog]
|
||||
|
||||
You can also browse the link:http://www.networkupstools.org/source/2.6/[stable source directory].
|
||||
|
||||
|
|
@ -48,7 +49,7 @@ link:http://alioth.debian.org/[Debian Alioth server].
|
|||
|
||||
To retrieve the current development tree, use the following command:
|
||||
|
||||
$ svn co svn://svn.debian.org/nut/trunk
|
||||
$ svn co svn://anonscm.debian.org/nut/trunk
|
||||
|
||||
To generate the build scripts, you must call, from the 'trunk' directory:
|
||||
|
||||
|
|
@ -69,9 +70,8 @@ use <<Snapshots,snapshots>>.
|
|||
Browse code
|
||||
^^^^^^^^^^^
|
||||
|
||||
You can also browse the code with link:http://svn.debian.org/wsvn/nut/trunk/?rev=0&sc=0[WebSvn].
|
||||
|
||||
Or through the link:http://boxster.ghz.cc/projects/nut[Trac mirror],
|
||||
You can also browse the code with link:http://alioth.debian.org/scm/?group_id=30602[WebSvn],
|
||||
or through the link:http://trac.networkupstools.org/projects/nut[Trac mirror],
|
||||
kindly hosted and maintained by Charles Lepple.
|
||||
|
||||
[[Snapshots]]
|
||||
|
|
@ -113,5 +113,6 @@ link:http://www.openbsd.org/cgi-bin/cvsweb/ports/sysutils/nut/[OpenBSD].
|
|||
link:http://pdb.finkproject.org/pdb/package.php/nut[Fink],
|
||||
link:http://trac.macports.org/browser/trunk/dports/sysutils/nut/Portfile[MacPorts]
|
||||
|
||||
- Windows (client side only):
|
||||
link:http://csociety.ecn.purdue.edu/~delpha/winnut/[WinNUT]
|
||||
- Windows (complete port, Beta):
|
||||
link:http://www.networkupstools.org/source/2.6/NUT-Installer-2.6.0-1.msi[Windows MSI installer 2.6.0-1]
|
||||
|
||||
|
|
|
|||
|
|
@ -235,5 +235,4 @@ The other systems are Slaves of UPS 2.
|
|||
Image credits
|
||||
-------------
|
||||
|
||||
Thanks to Luc Descotils and Arnaud Quette at Eaton for providing shiny
|
||||
cleaned-up graphics.
|
||||
Thanks to Eaton for providing shiny modern graphics.
|
||||
|
|
|
|||
Binary file not shown.
|
Before Width: | Height: | Size: 31 KiB After Width: | Height: | Size: 44 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 17 KiB After Width: | Height: | Size: 24 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 33 KiB After Width: | Height: | Size: 47 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 9.9 KiB After Width: | Height: | Size: 16 KiB |
|
|
@ -63,7 +63,6 @@ subdir = docs/man
|
|||
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
|
||||
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
|
||||
am__aclocal_m4_deps = $(top_srcdir)/m4/ax_compare_version.m4 \
|
||||
$(top_srcdir)/m4/ax_create_stdint_h.m4 \
|
||||
$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
|
||||
$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
|
||||
$(top_srcdir)/m4/lt~obsolete.m4 \
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: apcsmart
|
||||
.\" Author: [see the "AUTHOR" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "APCSMART" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "APCSMART" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: bcmxcp
|
||||
.\" Author: [see the "AUTHOR" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "BCMXCP" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "BCMXCP" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: bcmxcp_usb
|
||||
.\" Author: [see the "AUTHOR" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "BCMXCP_USB" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "BCMXCP_USB" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: belkin
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "BELKIN" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "BELKIN" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: belkinunv
|
||||
.\" Author: [see the "AUTHOR" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "BELKINUNV" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "BELKINUNV" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: bestfcom
|
||||
.\" Author: [see the "AUTHORS" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "BESTFCOM" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "BESTFCOM" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: bestfortress
|
||||
.\" Author: [see the "AUTHOR" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "BESTFORTRESS" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "BESTFORTRESS" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: bestuferrups
|
||||
.\" Author: [see the "AUTHORS" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "BESTUFERRUPS" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "BESTUFERRUPS" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: bestups
|
||||
.\" Author: [see the "AUTHOR" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "BESTUPS" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "BESTUPS" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: blazer
|
||||
.\" Author: [see the "AUTHORS" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "BLAZER" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "BLAZER" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: clone
|
||||
.\" Author: [see the "AUTHOR" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "CLONE" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "CLONE" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: dummy-ups
|
||||
.\" Author: [see the "AUTHOR" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "DUMMY\-UPS" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "DUMMY\-UPS" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
@ -63,7 +63,7 @@ For instance:
|
|||
.RE
|
||||
.\}
|
||||
.sp
|
||||
This file is generally named "something\&.dev"\&. It contains a list of all valid data and associated values, and has the same format as an \fBupsc\fR(8) dump (<varname>: <value>)\&. So you can easilly create definition files from an existing UPS using "upsc > file\&.dev"\&. It can also be empty, in which case only a basic set of data is available: device\&.\fB, driver\&.\fR, ups\&.mfr, ups\&.model, ups\&.status
|
||||
This file is generally named "something\&.dev"\&. It contains a list of all valid data and associated values, and has the same format as an \fBupsc\fR(8) dump (<varname>: <value>)\&. So you can easily create definition files from an existing UPS using "upsc > file\&.dev"\&. It can also be empty, in which case only a basic set of data is available: device\&.\fB, driver\&.\fR, ups\&.mfr, ups\&.model, ups\&.status
|
||||
.sp
|
||||
Samples definition files are available in the "data" directory of the nut source tree, and generally in the sysconfig directory of your system distribution\&.
|
||||
.sp
|
||||
|
|
|
|||
|
|
@ -55,7 +55,7 @@ For instance:
|
|||
|
||||
This file is generally named "something.dev". It contains a list of all
|
||||
valid data and associated values, and has the same format as an linkman:upsc[8]
|
||||
dump (<varname>: <value>). So you can easilly create definition
|
||||
dump (<varname>: <value>). So you can easily create definition
|
||||
files from an existing UPS using "upsc > file.dev".
|
||||
It can also be empty, in which case only a basic set of data is available:
|
||||
device.*, driver.*, ups.mfr, ups.model, ups.status
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: etapro
|
||||
.\" Author: [see the "AUTHOR" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "ETAPRO" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "ETAPRO" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: everups
|
||||
.\" Author: [see the "AUTHOR" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "EVERUPS" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "EVERUPS" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: gamatronic
|
||||
.\" Author: [see the "AUTHOR" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "GAMATRONIC" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "GAMATRONIC" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: genericups
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "GENERICUPS" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "GENERICUPS" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: hosts.conf
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "HOSTS\&.CONF" "5" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "HOSTS\&.CONF" "5" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: isbmex
|
||||
.\" Author: [see the "AUTHOR" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "ISBMEX" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "ISBMEX" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: ivtscd
|
||||
.\" Author: [see the "AUTHOR" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "IVTSCD" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "IVTSCD" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: libupsclient-config
|
||||
.\" Author: [see the "AUTHORS" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "LIBUPSCLIENT\-CONFIG" "1" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "LIBUPSCLIENT\-CONFIG" "1" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: liebert-esp2
|
||||
.\" Author: [see the "AUTHOR" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "LIEBERT\-ESP2" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "LIEBERT\-ESP2" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: liebert
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "LIEBERT" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "LIEBERT" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: masterguard
|
||||
.\" Author: [see the "AUTHOR" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "MASTERGUARD" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "MASTERGUARD" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: metasys
|
||||
.\" Author: [see the "AUTHOR" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "METASYS" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "METASYS" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
@ -124,7 +124,7 @@ This driver supports no extra arguments from \fBups.conf\fR(5)\&.
|
|||
.sp
|
||||
This driver has been tested on Meta System HF Millennium 820 and ally HF 1000 only\&.
|
||||
.sp
|
||||
Any informations about the use of the driver with the other listed UPS are really welcome\&.
|
||||
Any information about the use of the driver with the other listed UPS are really welcome\&.
|
||||
.SH "AUTHOR"
|
||||
.sp
|
||||
Fabio Di Niro <blaxwan@users\&.sourceforge\&.net>
|
||||
|
|
|
|||
|
|
@ -44,7 +44,7 @@ BUGS
|
|||
This driver has been tested on Meta System HF Millennium 820 and
|
||||
ally HF 1000 only.
|
||||
|
||||
Any informations about the use of the driver with the other listed
|
||||
Any information about the use of the driver with the other listed
|
||||
UPS are really welcome.
|
||||
|
||||
AUTHOR
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: mge-shut
|
||||
.\" Author: [see the "AUTHOR" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "MGE\-SHUT" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "MGE\-SHUT" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: mge-utalk
|
||||
.\" Author: [see the "AUTHOR" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "MGE\-UTALK" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "MGE\-UTALK" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: microdowell
|
||||
.\" Author: [see the "AUTHOR" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "MICRODOWELL" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "MICRODOWELL" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: netxml-ups
|
||||
.\" Author: [see the "AUTHORS" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "NETXML\-UPS" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "NETXML\-UPS" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: nut.conf
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "NUT\&.CONF" "5" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "NUT\&.CONF" "5" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: nutupsdrv
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "NUTUPSDRV" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "NUTUPSDRV" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: oneac
|
||||
.\" Author: [see the "AUTHOR" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "ONEAC" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "ONEAC" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: optiups
|
||||
.\" Author: [see the "AUTHOR" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "OPTIUPS" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "OPTIUPS" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: powercom
|
||||
.\" Author: [see the "AUTHOR" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "POWERCOM" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "POWERCOM" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
@ -41,7 +41,7 @@ This driver supports the following optional settings in the \fBups.conf\fR(5) fi
|
|||
.PP
|
||||
\fBlinevoltage\fR=\fIvalue\fR
|
||||
.RS 4
|
||||
An integer specifying the mains voltage\&. It can\(cqt be auto detected\&. Acceptable values are in the range of 110\(em120 or 220\(em240\&. The default is
|
||||
An integer specifying the line voltage\&. It can\(cqt be auto detected\&. Acceptable values are in the range of 110\-120 or 220\-240\&. The default is
|
||||
\fI230\fR\&.
|
||||
.RE
|
||||
.PP
|
||||
|
|
@ -66,23 +66,30 @@ Like modelname above, but for the serial number\&. The default is
|
|||
\fBtype\fR=\fIname\fR
|
||||
.RS 4
|
||||
The exact type of the communication protocol within the powercom family, that will be used to communicate with the UPS\&. The type is named after the first modelname that was coded with that protocol\&. The acceptable names are
|
||||
\fIKP625AP\fR,
|
||||
\fITrust\fR,
|
||||
\fIEgys\fR,
|
||||
\fIKP625AP\fR,
|
||||
\fIIMP\fR,
|
||||
\fIKIN\fR,
|
||||
\fIBNT\fR,
|
||||
\fIIMP\fR
|
||||
and
|
||||
\fIBNT\fR, and
|
||||
\fIBNT\-other\fR\&. The default is
|
||||
\fITrust\fR\&.
|
||||
.sp
|
||||
\fIBNT\-other\fR
|
||||
is a special type for BNT 100\-120V models\&. For this type you can (I think must!) specify voltage, batteryPercentage, loadPercentage and validationSequence\&.
|
||||
is a special type for other BNT models (such as the 1500A at 120V and can be used to override ALL models using ALL of the following values\&.
|
||||
.RE
|
||||
.PP
|
||||
\fBshutdownArguments\fR={{\fIminutes\fR,\fIseconds\fR},\fIwhether_minutes_should_be_used\fR}
|
||||
.RS 4
|
||||
The minutes and seconds that the UPS should wait between receiving the shutdown command and actually shutting off\&. The other argument should be set to the character
|
||||
\fIn\fR
|
||||
only when the minutes value should be skipped and not sent to the UPS\&. The default is type\-dependent and is given below\&. The braces and commas are mandatory\&. Note that there should be no whitespace characters\&.
|
||||
.RE
|
||||
.PP
|
||||
\fBnumOfBytesFromUPS\fR=\fIvalue\fR
|
||||
.RS 4
|
||||
The number of bytes in a UPS frame\&. The default is type\-dependent and is given below\&.
|
||||
The number of bytes in a UPS frame: 16 is common, 11 for
|
||||
\fITrust\fR\&. The default is type\-dependent and is given below\&.
|
||||
.RE
|
||||
.PP
|
||||
\fBmethodOfFlowControl\fR=\fIname\fR
|
||||
|
|
@ -94,36 +101,29 @@ or
|
|||
\fIno_flow_control\fR\&.
|
||||
.RE
|
||||
.PP
|
||||
\fBshutdownArguments\fR={{\fIminutes\fR,\fIseconds\fR},\fIwhether_minutes_should_be_used\fR}
|
||||
.RS 4
|
||||
The minutes and seconds that the UPS should wait between receiving the shutdown command and actually shutting off\&. The other argument should be set to the character
|
||||
\fIn\fR
|
||||
only when the minutes value should be skipped and not sent to the UPS\&. The default is type\-dependent and is given below\&. The braces and commas are mandatory\&. Note that there should be no whitespace characters\&.
|
||||
.RE
|
||||
.PP
|
||||
\fBvoltage\fR={\fIcoefficient1\fR,\fIcoefficient2\fR,\fIcoefficient3\fR,\fIcoefficient4\fR}
|
||||
.RS 4
|
||||
(Only for types KP625AP, Trust, Egys, BNT\-other\&.) A quad that is used convert the raw data to a human\-readable voltage reading\&. The default is type\-dependent and is given below\&. Do note that the braces and commas are mandatory, as well as the lack of whitespace characters\&.
|
||||
.RE
|
||||
.PP
|
||||
\fBfrequency\fR={\fIcoefficient1\fR,\fIcoefficient2\fR}
|
||||
.RS 4
|
||||
(Only for types KP625AP, Trust, Egys\&.) A pair to convert the raw data to a human\-readable frequency reading\&. The default is type\-dependent and is given below\&. Do note that the braces and commas are mandatory as well, as the lack of whitespace characters\&.
|
||||
.RE
|
||||
.PP
|
||||
\fBbatteryPercentage\fR={\fIcoefficient1\fR,\fIcoefficient2\fR,\fIcoefficient3\fR,\fIcoefficient4\fR,\fIcoefficient5\fR}
|
||||
.RS 4
|
||||
(Only for KP625AP, Trust, Egys, BNT\-other\&.) A 5 tuple to convert the raw data to a human\-readable battery percentage reading\&. The default is type\-dependent and is given below\&. Do note that the braces and commas are mandatory, as the lack of white space characters\&.
|
||||
.RE
|
||||
.PP
|
||||
\fBloadPercentage\fR={\fIcoefficient1\fR,\fIcoefficient2\fR,\fIcoefficient3\fR,\fIcoefficient4\fR}
|
||||
.RS 4
|
||||
(Only for types KP625AP, Trust, Egys, BNT\-other\&.) A quad to convert the raw data to human readable load percentage reading\&. The default is type\-dependent and is given below\&. Do note that the braces and commas are mandatory, as the lack of white space characters\&.
|
||||
.RE
|
||||
.PP
|
||||
\fBvalidationSequence\fR={{\fIindex1\fR,\fIvalue1\fR},{\fIindex2\fR,\fIvalue2\fR},{\fIindex3\fR,\fIvalue3\fR}}
|
||||
.RS 4
|
||||
(Only for types KP625AP, Trust, Egys, BNT\-other\&.) 3 pairs to be used for validating the UPS by comparing bytes of the raw data with constant values\&. The default is type\-dependent and is given below\&. The braces and commas are mandatory, as the lack of white space characters\&.
|
||||
(Only for types KP625AP, Trust, Egys\&.) 3 pairs to be used for validating the UPS by comparing bytes of the raw data with constant values\&. The index selects the byte from the UPS (see numOfBytesFromUPS) and the value is for matching to the byte\&. The default is type\-dependent and is given below\&. The braces and commas are mandatory, as the lack of white space characters\&.
|
||||
.RE
|
||||
.PP
|
||||
\fBfrequency\fR={\fIA\fR,\fIB\fR}
|
||||
.RS 4
|
||||
(Only for types KP625AP, Trust, Egys\&.) A pair to convert the raw frequency data to a human\-readable frequency reading using the function 1/(A*x+B)\&. If the raw value x IS the frequency, then set A=1/(x^2) and B=0\&. The default is type\-dependent and is given below\&. Do note that the braces and commas are mandatory as well, as the lack of whitespace characters\&.
|
||||
.RE
|
||||
.PP
|
||||
\fBloadPercentage\fR={\fIBatteryA\fR,\fIBatteryB\fR,\fILineA\fR,\fILineB\fR}
|
||||
.RS 4
|
||||
(Only for types KP625AP, Trust, Egys\&.) A quad to convert the raw load data to human readable load percentage reading using the function A*x+B\&. If the raw value x IS the Load Percent, then set A=1 and B=0\&. The default is type\-dependent and is given below\&. Do note that the braces and commas are mandatory, as the lack of white space characters\&.
|
||||
.RE
|
||||
.PP
|
||||
\fBbatteryPercentage\fR={\fIBattery1\fR,\fIBattery2\fR,\fIBattery3\fR,\fILine4\fR,\fILine5\fR}
|
||||
.RS 4
|
||||
(Only for KP625AP, Trust, Egys\&.) A 5 tuple to convert the raw battery and line data to a human\-readable battery and line percentage reading using the functions (Battery) A*x+B*y+C and (Line) D*x+E\&. If the raw value x IS the Battery Percent, then set A=1, B=0, C=0, D=1, E=0\&. The default is type\-dependent and is given below\&. Do note that the braces and commas are mandatory, as the lack of white space characters\&.
|
||||
.RE
|
||||
.PP
|
||||
\fBvoltage\fR={\fI240A\fR,\fI240B\fR,\fI120A\fR,\fI120B\fR}
|
||||
.RS 4
|
||||
(Only for types KP625AP, Trust, Egys\&.) A quad that is used convert the raw voltage data to a human\-readable voltage reading using the function A*x+B\&. If the raw value x IS HALF the Voltage, then set A=2, B=0\&. The default is type\-dependent and is given below\&. Do note that the braces and commas are mandatory, as well as the lack of whitespace characters\&.
|
||||
.RE
|
||||
.SH "DEFAULT VALUES FOR THE EXTRA ARGUMENTS"
|
||||
.sp
|
||||
|
|
@ -141,7 +141,7 @@ type = Trust
|
|||
.RE
|
||||
.\}
|
||||
.sp
|
||||
The rest of the default values for the extra arguments are type\-dependent:
|
||||
The rest of the default values for the extra arguments are type\-dependent\&. However, \fIBNT\-other\fR is a special type that can be used to override ALL values for ALL models\&.
|
||||
.SS "Trust"
|
||||
.sp
|
||||
.if n \{\
|
||||
|
|
@ -248,16 +248,17 @@ numOfBytesFromUPS = 16
|
|||
methodOfFlowControl = no_flow_control
|
||||
validationSequence = {{8,0},{8,0},{8,0}}
|
||||
shutdownArguments = {{1,30},y}
|
||||
loadPercentage = {1\&.4474,0\&.0,0\&.8594,0\&.0}
|
||||
batteryPercentage = {5\&.0000,0\&.3268,\-825\&.00,0\&.46511,0}
|
||||
voltage = {1\&.9216,\-0\&.0977,0\&.82857,0\&.0000}
|
||||
frequency = {0\&.00027778,0\&.0000}
|
||||
loadPercentage = {1\&.0000,0\&.0,1\&.0000,0\&.0}
|
||||
batteryPercentage = {1\&.0000,0\&.0000,0\&.0000,1\&.0000,0\&.0000}
|
||||
voltage = {2\&.0000,0\&.0000,2\&.0000,0\&.0000}
|
||||
.fi
|
||||
.if n \{\
|
||||
.RE
|
||||
.\}
|
||||
.SH "AUTHOR"
|
||||
.sp
|
||||
Peter Bieringer <pb@bieringer\&.de>, Alexey Sidorov <alexsid@altlinux\&.org>
|
||||
Peter Bieringer <pb@bieringer\&.de>, Alexey Sidorov <alexsid@altlinux\&.org>, Keven L\&. Ates <atescomp@gmail\&.com>
|
||||
.SH "SEE ALSO"
|
||||
.SS "The core driver:"
|
||||
.sp
|
||||
|
|
|
|||
|
|
@ -24,84 +24,85 @@ This driver supports the following optional settings in the
|
|||
linkman:ups.conf[5] file:
|
||||
|
||||
*linevoltage*='value'::
|
||||
An integer specifying the mains voltage. It can't be auto detected.
|
||||
Acceptable values are in the range of 110--120 or 220--240. The default
|
||||
is '230'.
|
||||
An integer specifying the line voltage. It can't be auto detected. Acceptable
|
||||
values are in the range of 110-120 or 220-240. The default is '230'.
|
||||
|
||||
*manufacturer*='name'::
|
||||
Specify the manufacturer name, which also can't be auto detected. This is
|
||||
a user defined string, so any name is acceptable. The default is
|
||||
'PowerCom'.
|
||||
Specify the manufacturer name, which also can't be auto detected. This is a
|
||||
user defined string, so any name is acceptable. The default is 'PowerCom'.
|
||||
|
||||
*modelname*='name'::
|
||||
Specify the model name, which also can't be auto detected. This is a
|
||||
user defined string, so any name is acceptable. The default is
|
||||
'Unknown'.
|
||||
Specify the model name, which also can't be auto detected. This is a user
|
||||
defined string, so any name is acceptable. The default is 'Unknown'.
|
||||
|
||||
*serialnumber*='value'::
|
||||
Like modelname above, but for the serial number. The default is
|
||||
'Unknown'.
|
||||
Like modelname above, but for the serial number. The default is 'Unknown'.
|
||||
|
||||
*type*='name'::
|
||||
The exact type of the communication protocol within the powercom family,
|
||||
that will be used to communicate with the UPS. The type is named after
|
||||
the first modelname that was coded with that protocol. The acceptable
|
||||
names are 'KP625AP', 'Trust', 'Egys', 'KIN', 'BNT', 'IMP' and 'BNT-other'. The
|
||||
default is 'Trust'.
|
||||
The exact type of the communication protocol within the powercom family, that
|
||||
will be used to communicate with the UPS. The type is named after the first
|
||||
modelname that was coded with that protocol. The acceptable names are
|
||||
'Trust', 'Egys', 'KP625AP', 'IMP', 'KIN', 'BNT', and 'BNT-other'.
|
||||
The default is 'Trust'.
|
||||
+
|
||||
'BNT-other' is a special type for BNT 100-120V models.
|
||||
For this type you can (I think must!) specify voltage, batteryPercentage,
|
||||
loadPercentage and validationSequence.
|
||||
|
||||
*numOfBytesFromUPS*='value'::
|
||||
The number of bytes in a UPS frame. The default is type-dependent and
|
||||
is given below.
|
||||
|
||||
*methodOfFlowControl*='name'::
|
||||
The method of serial communication flow control that is engaged by the
|
||||
UPS. The default is type-dependent and is given below. Acceptable names
|
||||
are 'dtr0rts1', 'dtr1' or 'no_flow_control'.
|
||||
'BNT-other' is a special type for other BNT models (such as the 1500A at 120V
|
||||
and can be used to override ALL models using ALL of the following values.
|
||||
|
||||
*shutdownArguments*={{'minutes','seconds'},'whether_minutes_should_be_used'}::
|
||||
The minutes and seconds that the UPS should wait between receiving the
|
||||
shutdown command and actually shutting off. The other argument should
|
||||
be set to the character 'n' only when the minutes value should be
|
||||
skipped and not sent to the UPS. The default is type-dependent and is
|
||||
given below. The braces and commas are mandatory. Note that there should
|
||||
be no whitespace characters.
|
||||
shutdown command and actually shutting off. The other argument should be set
|
||||
to the character 'n' only when the minutes value should be skipped and not
|
||||
sent to the UPS. The default is type-dependent and is given below. The braces
|
||||
and commas are mandatory. Note that there should be no whitespace characters.
|
||||
|
||||
*voltage*={'coefficient1','coefficient2','coefficient3','coefficient4'}::
|
||||
(Only for types KP625AP, Trust, Egys, BNT-other.)
|
||||
A quad that is used convert the raw data to a human-readable voltage
|
||||
reading. The default is type-dependent and is given below. Do note that
|
||||
the braces and commas are mandatory, as well as the lack of whitespace
|
||||
characters.
|
||||
*numOfBytesFromUPS*='value'::
|
||||
The number of bytes in a UPS frame: 16 is common, 11 for 'Trust'. The default
|
||||
is type-dependent and is given below.
|
||||
|
||||
*frequency*={'coefficient1','coefficient2'}::
|
||||
(Only for types KP625AP, Trust, Egys.)
|
||||
A pair to convert the raw data to a human-readable frequency reading. The
|
||||
default is type-dependent and is given below. Do note that the braces
|
||||
and commas are mandatory as well, as the lack of whitespace characters.
|
||||
|
||||
*batteryPercentage*={'coefficient1','coefficient2','coefficient3','coefficient4','coefficient5'}::
|
||||
(Only for KP625AP, Trust, Egys, BNT-other.)
|
||||
A 5 tuple to convert the raw data to a human-readable battery percentage
|
||||
reading. The default is type-dependent and is given below. Do note that
|
||||
the braces and commas are mandatory, as the lack of white space
|
||||
characters.
|
||||
|
||||
*loadPercentage*={'coefficient1','coefficient2','coefficient3','coefficient4'}::
|
||||
(Only for types KP625AP, Trust, Egys, BNT-other.)
|
||||
A quad to convert the raw data to human readable load percentage
|
||||
reading. The default is type-dependent and is given below. Do note that
|
||||
the braces and commas are mandatory, as the lack of white space
|
||||
characters.
|
||||
*methodOfFlowControl*='name'::
|
||||
The method of serial communication flow control that is engaged by the UPS.
|
||||
The default is type-dependent and is given below. Acceptable names are
|
||||
'dtr0rts1', 'dtr1' or 'no_flow_control'.
|
||||
|
||||
*validationSequence*={{'index1','value1'},{'index2','value2'},{'index3','value3'}}::
|
||||
(Only for types KP625AP, Trust, Egys, BNT-other.)
|
||||
3 pairs to be used for validating the UPS by comparing bytes of the raw
|
||||
data with constant values. The default is type-dependent and is given
|
||||
below. The braces and commas are mandatory, as the lack of white space
|
||||
(Only for types KP625AP, Trust, Egys.)
|
||||
3 pairs to be used for validating the UPS by comparing bytes of the raw data
|
||||
with constant values. The index selects the byte from the UPS (see
|
||||
numOfBytesFromUPS) and the value is for matching to the byte. The default is
|
||||
type-dependent and is given below. The braces and commas are mandatory, as
|
||||
the lack of white space characters.
|
||||
|
||||
*frequency*={'A','B'}::
|
||||
(Only for types KP625AP, Trust, Egys.)
|
||||
A pair to convert the raw frequency data to a human-readable frequency
|
||||
reading using the function 1/(A*x+B). If the raw value x IS the frequency,
|
||||
then set A=1/(x^2) and B=0. The default is type-dependent and is given below.
|
||||
Do note that the braces and commas are mandatory as well, as the lack of
|
||||
whitespace characters.
|
||||
|
||||
*loadPercentage*={'BatteryA','BatteryB','LineA','LineB'}::
|
||||
(Only for types KP625AP, Trust, Egys.)
|
||||
A quad to convert the raw load data to human readable load percentage reading
|
||||
using the function A*x+B. If the raw value x IS the Load Percent, then set
|
||||
A=1 and B=0. The default is type-dependent and is given below. Do note that
|
||||
the braces and commas are mandatory, as the lack of white space
|
||||
characters.
|
||||
|
||||
*batteryPercentage*={'Battery1','Battery2','Battery3','Line4','Line5'}::
|
||||
(Only for KP625AP, Trust, Egys.)
|
||||
A 5 tuple to convert the raw battery and line data to a human-readable
|
||||
battery and line percentage reading using the functions (Battery)
|
||||
A*x+B*y+C and (Line) D*x+E. If the raw value x IS the Battery Percent, then
|
||||
set A=1, B=0, C=0, D=1, E=0. The default is type-dependent and is given below.
|
||||
Do note that the braces and commas are mandatory, as the lack of white space
|
||||
characters.
|
||||
|
||||
*voltage*={'240A','240B','120A','120B'}::
|
||||
(Only for types KP625AP, Trust, Egys.)
|
||||
A quad that is used convert the raw voltage data to a human-readable voltage
|
||||
reading using the function A*x+B. If the raw value x IS HALF the Voltage,
|
||||
then set A=2, B=0. The default is type-dependent and is given below. Do note
|
||||
that the braces and commas are mandatory, as well as the lack of whitespace
|
||||
characters.
|
||||
|
||||
DEFAULT VALUES FOR THE EXTRA ARGUMENTS
|
||||
|
|
@ -112,7 +113,9 @@ DEFAULT VALUES FOR THE EXTRA ARGUMENTS
|
|||
serialnumber = Unknown
|
||||
type = Trust
|
||||
|
||||
The rest of the default values for the extra arguments are type-dependent:
|
||||
The rest of the default values for the extra arguments are type-dependent.
|
||||
However, 'BNT-other' is a special type that can be used to override ALL
|
||||
values for ALL models.
|
||||
|
||||
Trust
|
||||
~~~~~
|
||||
|
|
@ -136,10 +139,8 @@ KP625AP
|
|||
batteryPercentage = {5.0000,0.3268,-825.00,4.5639,-835.82}
|
||||
voltage = {1.9216,-0.0977,0.9545,0.0000}
|
||||
|
||||
|
||||
Egys
|
||||
~~~~
|
||||
|
||||
numOfBytesFromUPS = 16
|
||||
methodOfFlowControl = no_flow_control
|
||||
validationSequence = {{5,0x80},{7,0},{8,0}}
|
||||
|
|
@ -149,49 +150,43 @@ Egys
|
|||
batteryPercentage = {5.0000,0.3268,-825.00,2.2105,-355.37}
|
||||
voltage = {1.9216,-0.0977,0.9545,0.0000}
|
||||
|
||||
|
||||
IMP
|
||||
~~~
|
||||
|
||||
numOfBytesFromUPS = 16
|
||||
methodOfFlowControl = no_flow_control
|
||||
validationSequence = {{5,0xFF},{7,0},{8,0}}
|
||||
shutdownArguments = {{1,30},y}
|
||||
|
||||
|
||||
KIN
|
||||
~~~
|
||||
|
||||
numOfBytesFromUPS = 16
|
||||
methodOfFlowControl = no_flow_control
|
||||
validationSequence = {{11,0x4b},{8,0},{8,0}}
|
||||
shutdownArguments = {{1,30},y}
|
||||
|
||||
|
||||
BNT
|
||||
~~~
|
||||
|
||||
numOfBytesFromUPS = 16
|
||||
methodOfFlowControl = no_flow_control
|
||||
validationSequence = {{11,0x42},{8,0},{8,0}}
|
||||
shutdownArguments = {{1,30},y}
|
||||
|
||||
|
||||
BNT-other
|
||||
~~~~~~~~~
|
||||
|
||||
numOfBytesFromUPS = 16
|
||||
methodOfFlowControl = no_flow_control
|
||||
validationSequence = {{8,0},{8,0},{8,0}}
|
||||
shutdownArguments = {{1,30},y}
|
||||
loadPercentage = {1.4474,0.0,0.8594,0.0}
|
||||
batteryPercentage = {5.0000,0.3268,-825.00,0.46511,0}
|
||||
voltage = {1.9216,-0.0977,0.82857,0.0000}
|
||||
frequency = {0.00027778,0.0000}
|
||||
loadPercentage = {1.0000,0.0,1.0000,0.0}
|
||||
batteryPercentage = {1.0000,0.0000,0.0000,1.0000,0.0000}
|
||||
voltage = {2.0000,0.0000,2.0000,0.0000}
|
||||
|
||||
AUTHOR
|
||||
------
|
||||
Peter Bieringer <pb@bieringer.de>,
|
||||
Alexey Sidorov <alexsid@altlinux.org>
|
||||
Alexey Sidorov <alexsid@altlinux.org>,
|
||||
Keven L. Ates <atescomp@gmail.com>
|
||||
|
||||
SEE ALSO
|
||||
--------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: powerman-pdu
|
||||
.\" Author: [see the "AUTHOR" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "POWERMAN\-PDU" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "POWERMAN\-PDU" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: powerpanel
|
||||
.\" Author: [see the "AUTHORS" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "POWERPANEL" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "POWERPANEL" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: rhino
|
||||
.\" Author: [see the "AUTHOR" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "RHINO" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "RHINO" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: richcomm_usb
|
||||
.\" Author: [see the "AUTHORS" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "RICHCOMM_USB" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "RICHCOMM_USB" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: safenet
|
||||
.\" Author: [see the "AUTHOR" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "SAFENET" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "SAFENET" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: snmp-ups
|
||||
.\" Author: [see the "AUTHORS" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "SNMP\-UPS" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "SNMP\-UPS" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: solis
|
||||
.\" Author: [see the "AUTHOR" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "SOLIS" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "SOLIS" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: tripplite
|
||||
.\" Author: [see the "AUTHORS" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "TRIPPLITE" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "TRIPPLITE" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: tripplite_usb
|
||||
.\" Author: [see the "AUTHOR" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "TRIPPLITE_USB" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "TRIPPLITE_USB" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: tripplitesu
|
||||
.\" Author: [see the "AUTHOR" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "TRIPPLITESU" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "TRIPPLITESU" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: ups.conf
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPS\&.CONF" "5" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPS\&.CONF" "5" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
@ -132,12 +132,79 @@ You should only use this if your system won\(cqt work without it\&.
|
|||
This may be needed on Mac OS X systems\&.
|
||||
.RE
|
||||
.PP
|
||||
\fBignorelb\fR
|
||||
.RS 4
|
||||
Optional\&. When you specify this, the driver ignores a low battery condition flag that is reported by the UPS (some devices will switch off almost immediately after setting this flag, or will report this as soons as the mains fails)\&. Instead it will use either of the following conditions to determine when the battery is low:
|
||||
.sp
|
||||
.if n \{\
|
||||
.RS 4
|
||||
.\}
|
||||
.nf
|
||||
battery\&.charge < battery\&.charge\&.low
|
||||
battery\&.runtime < battery\&.runtime\&.low
|
||||
.fi
|
||||
.if n \{\
|
||||
.RE
|
||||
.\}
|
||||
.sp
|
||||
The idea is to set the battery\&.charge\&.low and/or battery\&.runtime\&.low levels in
|
||||
\fBups\&.conf\fR
|
||||
to a value that gives enough time to cleanly shutdown your system:
|
||||
.sp
|
||||
.if n \{\
|
||||
.RS 4
|
||||
.\}
|
||||
.nf
|
||||
override\&.battery\&.charge\&.low = 30
|
||||
override\&.battery\&.runtime\&.low = 180
|
||||
.fi
|
||||
.if n \{\
|
||||
.RE
|
||||
.\}
|
||||
.sp
|
||||
In order for this to work, your UPS should be able to (reliably) report charge and/or runtime remaining on battery\&. Use with caution!
|
||||
.RE
|
||||
.PP
|
||||
\fBmaxstartdelay\fR
|
||||
.RS 4
|
||||
Optional\&. This can be set as a global variable above your first UPS definition and it can also be set in a UPS section\&. This value controls how long upsdrvctl will wait for the driver to finish starting\&. This keeps your system from getting stuck due to a broken driver or UPS\&.
|
||||
.sp
|
||||
The default is 45 seconds\&.
|
||||
.RE
|
||||
.PP
|
||||
\fBdefault\&.<variable>\fR
|
||||
.RS 4
|
||||
Optional\&. Set a default value for <variable> which is used in case the UPS doesn\(cqt provide a value, but will be overwritten if a value is available from the UPS:
|
||||
.sp
|
||||
.if n \{\
|
||||
.RS 4
|
||||
.\}
|
||||
.nf
|
||||
default\&.input\&.voltage\&.nominal = 230
|
||||
.fi
|
||||
.if n \{\
|
||||
.RE
|
||||
.\}
|
||||
.sp
|
||||
The above will report the nominal input voltage to be 230, unless the UPS tells us differently\&.
|
||||
.RE
|
||||
.PP
|
||||
\fBoverride\&.<variable>\fR
|
||||
.RS 4
|
||||
Optional\&. Set a value for <value> that overrides any value that may be read from the UPS\&. Used for overriding values from the UPS that are clearly wrong (some devices report wrong values for battery voltage for instance):
|
||||
.sp
|
||||
.if n \{\
|
||||
.RS 4
|
||||
.\}
|
||||
.nf
|
||||
override\&.battery\&.voltage\&.nominal = 12
|
||||
.fi
|
||||
.if n \{\
|
||||
.RE
|
||||
.\}
|
||||
.sp
|
||||
Use with caution! This will only change the appearance of the variable to the outside world, internally in the UPS the original value is used\&.
|
||||
.RE
|
||||
.sp
|
||||
All other fields are passed through to the hardware\-specific part of the driver\&. See those manuals for the list of what is allowed\&.
|
||||
.SH "INTEGRATION"
|
||||
|
|
|
|||
|
|
@ -109,6 +109,27 @@ You should only use this if your system won't work without it.
|
|||
+
|
||||
This may be needed on Mac OS X systems.
|
||||
|
||||
*ignorelb*::
|
||||
|
||||
Optional. When you specify this, the driver ignores a low battery condition
|
||||
flag that is reported by the UPS (some devices will switch off almost
|
||||
immediately after setting this flag, or will report this as soons as the
|
||||
mains fails). Instead it will use either of the following conditions to
|
||||
determine when the battery is low:
|
||||
|
||||
battery.charge < battery.charge.low
|
||||
battery.runtime < battery.runtime.low
|
||||
+
|
||||
The idea is to set the battery.charge.low and/or battery.runtime.low levels
|
||||
in *ups.conf* to a value that gives enough time to cleanly shutdown your
|
||||
system:
|
||||
|
||||
override.battery.charge.low = 30
|
||||
override.battery.runtime.low = 180
|
||||
+
|
||||
In order for this to work, your UPS should be able to (reliably) report
|
||||
charge and/or runtime remaining on battery. Use with caution!
|
||||
|
||||
*maxstartdelay*::
|
||||
|
||||
Optional. This can be set as a global variable above your first UPS
|
||||
|
|
@ -118,6 +139,28 @@ system from getting stuck due to a broken driver or UPS.
|
|||
+
|
||||
The default is 45 seconds.
|
||||
|
||||
*default.<variable>*::
|
||||
|
||||
Optional. Set a default value for <variable> which is used in case the UPS
|
||||
doesn't provide a value, but will be overwritten if a value is available
|
||||
from the UPS:
|
||||
|
||||
default.input.voltage.nominal = 230
|
||||
+
|
||||
The above will report the nominal input voltage to be 230, unless the UPS
|
||||
tells us differently.
|
||||
|
||||
*override.<variable>*::
|
||||
|
||||
Optional. Set a value for <value> that overrides any value that may be read
|
||||
from the UPS. Used for overriding values from the UPS that are clearly wrong
|
||||
(some devices report wrong values for battery voltage for instance):
|
||||
|
||||
override.battery.voltage.nominal = 12
|
||||
+
|
||||
Use with caution! This will only change the appearance of the variable to
|
||||
the outside world, internally in the UPS the original value is used.
|
||||
|
||||
All other fields are passed through to the hardware-specific part of the
|
||||
driver. See those manuals for the list of what is allowed.
|
||||
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: upsc
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPSC" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPSC" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: upscli_connect
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPSCLI_CONNECT" "3" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPSCLI_CONNECT" "3" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: upscli_disconnect
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPSCLI_DISCONNECT" "3" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPSCLI_DISCONNECT" "3" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: upscli_fd
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPSCLI_FD" "3" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPSCLI_FD" "3" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: upscli_get
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPSCLI_GET" "3" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPSCLI_GET" "3" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: upscli_list_next
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPSCLI_LIST_NEXT" "3" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPSCLI_LIST_NEXT" "3" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: upscli_list_start
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPSCLI_LIST_START" "3" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPSCLI_LIST_START" "3" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: upscli_readline
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPSCLI_READLINE" "3" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPSCLI_READLINE" "3" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: upscli_sendline
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPSCLI_SENDLINE" "3" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPSCLI_SENDLINE" "3" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: upscli_splitaddr
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPSCLI_SPLITADDR" "3" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPSCLI_SPLITADDR" "3" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: upscli_splitname
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPSCLI_SPLITNAME" "3" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPSCLI_SPLITNAME" "3" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: upscli_ssl
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPSCLI_SSL" "3" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPSCLI_SSL" "3" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: upscli_strerror
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPSCLI_STRERROR" "3" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPSCLI_STRERROR" "3" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: upscli_upserror
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPSCLI_UPSERROR" "3" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPSCLI_UPSERROR" "3" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: upsclient
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPSCLIENT" "3" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPSCLIENT" "3" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: upscmd
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPSCMD" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPSCMD" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: upscode2
|
||||
.\" Author: [see the "AUTHOR" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPSCODE2" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPSCODE2" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: upsd
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPSD" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPSD" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: upsd.conf
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPSD\&.CONF" "5" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPSD\&.CONF" "5" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: upsd.users
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPSD\&.USERS" "5" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPSD\&.USERS" "5" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: upsdrvctl
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPSDRVCTL" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPSDRVCTL" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: upsimage.cgi
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPSIMAGE\&.CGI" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPSIMAGE\&.CGI" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: upslog
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPSLOG" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPSLOG" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: upsmon
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPSMON" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPSMON" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: upsmon.conf
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPSMON\&.CONF" "5" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPSMON\&.CONF" "5" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: upsrw
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPSRW" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPSRW" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: upssched
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPSSCHED" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPSSCHED" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: upssched.conf
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPSSCHED\&.CONF" "5" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPSSCHED\&.CONF" "5" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: upsset.cgi
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPSSET\&.CGI" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPSSET\&.CGI" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: upsset.conf
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPSSET\&.CONF" "5" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPSSET\&.CONF" "5" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: upsstats.cgi
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPSSTATS\&.CGI" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPSSTATS\&.CGI" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: upsstats.html
|
||||
.\" Author: [FIXME: author] [see http://docbook.sf.net/el/author]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "UPSSTATS\&.HTML" "5" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "UPSSTATS\&.HTML" "5" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: usbhid-ups
|
||||
.\" Author: [see the "AUTHORS" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "USBHID\-UPS" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "USBHID\-UPS" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -2,12 +2,12 @@
|
|||
.\" Title: victronups
|
||||
.\" Author: [see the "AUTHOR" section]
|
||||
.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
|
||||
.\" Date: 12/24/2010
|
||||
.\" Date: 05/31/2011
|
||||
.\" Manual: NUT Manual
|
||||
.\" Source: Network UPS Tools
|
||||
.\" Language: English
|
||||
.\"
|
||||
.TH "VICTRONUPS" "8" "12/24/2010" "Network UPS Tools" "NUT Manual"
|
||||
.TH "VICTRONUPS" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
|
||||
.\" -----------------------------------------------------------------
|
||||
.\" * Define some portability stuff
|
||||
.\" -----------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -86,6 +86,9 @@ ups: General unit information
|
|||
panel (*** opaque) | E
|
||||
| ups.contacts | UPS external contact sensors
|
||||
(*** opaque) | F0
|
||||
| ups.efficiency | Efficiency of the UPS (ratio
|
||||
of the output current on the
|
||||
input current) (percent) | 95
|
||||
| ups.power | Current value of apparent
|
||||
power (Volt-Amps) | 500
|
||||
| ups.power.nominal | Nominal value of apparent
|
||||
|
|
@ -363,6 +366,8 @@ outlet: Smart outlet management
|
|||
|
||||
NOTE: *n* stands for the outlet index. For more information, refer to the
|
||||
NUT outlets management and PDU notes chapter of the user manual.
|
||||
A special case is "outlet.0" which is equivalent to "outlet", and
|
||||
represent the whole set of outlets of the device.
|
||||
|
||||
[options="header"]
|
||||
|===============================================================================
|
||||
|
|
|
|||
|
|
@ -3,8 +3,15 @@ Hardware compatibility list
|
|||
===========================
|
||||
endif::website[]
|
||||
|
||||
NOTE: Before you buy, take a look at the link:acknowledgements.html[Acknowledgements]
|
||||
for information about which drivers are developed with the support of the manufacturer.
|
||||
[NOTE]
|
||||
================================================================================
|
||||
|
||||
Before you buy, take a look at the link:acknowledgements.html[Acknowledgements]
|
||||
for information about which drivers are developed with the support of the manufacturer.
|
||||
|
||||
Be sure to also read the <<footnotes,footnotes>>.
|
||||
|
||||
================================================================================
|
||||
|
||||
ifdef::website[]
|
||||
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
|
||||
|
|
@ -85,6 +92,7 @@ include::ups-html.txt[]
|
|||
|
||||
endif::website[]
|
||||
|
||||
[[footnotes]]
|
||||
[NOTE]
|
||||
================================================================================
|
||||
|
||||
|
|
@ -111,12 +119,23 @@ between the set of developers and the set of owners of that hardware.
|
|||
The way to fix it is to turn a developer into an owner or an owner into a
|
||||
developer.
|
||||
|
||||
*Omissions or errors*
|
||||
*Report new devices, omissions or errors*
|
||||
|
||||
There is a lot of UPS hardware for sale, and it's possible that we have missed
|
||||
listing some that are supported.
|
||||
There is a lot of power devices hardware for sale, and it's possible
|
||||
that we have missed listing some that are supported, or made an error.
|
||||
|
||||
So that this list can be as accurate as possible, please report any
|
||||
omissions to the
|
||||
link:http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser[NUT Users]
|
||||
mailing list, with *[HCL]* in the subject and including the following
|
||||
information:
|
||||
|
||||
- Device manufacturer and name,
|
||||
- upsc output (upsrw and upscmd outputs are also welcome),
|
||||
- link:docs/user-manual.chunked/ar01s06.html#Shutdown_design[shutdown sequence]
|
||||
testing results,
|
||||
- a link to an online description is also appreciated.
|
||||
|
||||
Please report any omissions so that this list can be as accurate as possible.
|
||||
|
||||
*Pointing the present HCL*
|
||||
|
||||
|
|
|
|||
|
|
@ -50,6 +50,7 @@ ASCIIDOC_PARAMS = --unsafe --backend=xhtml11 \
|
|||
--attribute scriptsdir=$(srcdir)/scripts \
|
||||
--attribute=badges \
|
||||
--attribute=website \
|
||||
--attribute=quirks \
|
||||
--attribute=revision=$(PACKAGE_VERSION) \
|
||||
--attribute localdate=`TZ=UTC date +%Y-%m-%d` \
|
||||
--attribute localtime=`TZ=UTC date +%H:%M:%S` \
|
||||
|
|
|
|||
|
|
@ -38,7 +38,6 @@ subdir = docs/website
|
|||
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
|
||||
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
|
||||
am__aclocal_m4_deps = $(top_srcdir)/m4/ax_compare_version.m4 \
|
||||
$(top_srcdir)/m4/ax_create_stdint_h.m4 \
|
||||
$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
|
||||
$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
|
||||
$(top_srcdir)/m4/lt~obsolete.m4 \
|
||||
|
|
@ -277,6 +276,7 @@ ASCIIDOC_PARAMS = --unsafe --backend=xhtml11 \
|
|||
--attribute scriptsdir=$(srcdir)/scripts \
|
||||
--attribute=badges \
|
||||
--attribute=website \
|
||||
--attribute=quirks \
|
||||
--attribute=revision=$(PACKAGE_VERSION) \
|
||||
--attribute localdate=`TZ=UTC date +%Y-%m-%d` \
|
||||
--attribute localtime=`TZ=UTC date +%H:%M:%S` \
|
||||
|
|
|
|||
|
|
@ -1,3 +1,5 @@
|
|||
- June 1, 2011: 2.6.1 released
|
||||
- May 19, 2011: link:download.html#_binary_packages[Beta NUT 2.6.0-1 package for Windows released]
|
||||
- January 14, 2011: 2.6.0 released
|
||||
- December 24, 2010: 2.6.0-pre1 released
|
||||
- December 16, 2010: link:http://www.lestat.st/en/informatique/projets/nut-monitor[NUT-Monitor] 1.3 released
|
||||
|
|
|
|||
|
|
@ -35,10 +35,8 @@
|
|||
<title>Network UPS Tools - {doctitle}</title>
|
||||
<meta http-equiv="Content-Type" content="text/html; charset={encoding}" />
|
||||
<meta name="generator" content="AsciiDoc {asciidoc-version}" />
|
||||
ifdef::index-only[]
|
||||
<meta name="description" content="Power Devices support" />
|
||||
<meta name="keywords" content="Free Software, UPS, Uninterruptible Power Supplies, PDU, Power Distributions Units, Solar Controllers, Power Devices" />
|
||||
endif::index-only[]
|
||||
<meta name="keywords" content="Free Software, UPS, Uninterruptible Power Supplies, PDU, Power Distributions Units, Solar Controllers, power, Power Devices, Linux, Unix, Windows, Mac OS X" />
|
||||
<link rel="stylesheet" href="{stylesdir=css}/{theme={backend}}.css" type="text/css" />
|
||||
{doctype-manpage}<link rel="stylesheet" href="{stylesdir=.}/{theme={backend}}-manpage.css" type="text/css" />
|
||||
ifdef::quirks[]
|
||||
|
|
@ -166,20 +164,20 @@ endif::badges[]
|
|||
</div>
|
||||
</div>
|
||||
</div>
|
||||
<!-- Google Analytics integration -->
|
||||
<script type="text/javascript">
|
||||
|
||||
ifdef::analytics[]
|
||||
<!-- script type="text/javascript" src="{scriptsdir=.}/ga.js"></script -->
|
||||
var _gaq = _gaq || [];
|
||||
_gaq.push(['_setAccount', 'UA-9664272-1']);
|
||||
_gaq.push(['_trackPageview']);
|
||||
|
||||
<script type="text/javascript">
|
||||
var gaJsHost = (("https:" == document.location.protocol) ? "https://ssl." : "http://www.");
|
||||
document.write(unescape("%3Cscript src='" + gaJsHost + "google-analytics.com/ga.js' type='text/javascript'%3E%3C/script%3E"));
|
||||
</script>
|
||||
<script type="text/javascript">
|
||||
try {
|
||||
var pageTracker = _gat._getTracker("UA-9664272-1");
|
||||
pageTracker._trackPageview();
|
||||
} catch(err) {}
|
||||
</script>
|
||||
(function() {
|
||||
var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true;
|
||||
ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js';
|
||||
var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s);
|
||||
})();
|
||||
|
||||
</script>
|
||||
endif::analytics[]
|
||||
</body>
|
||||
</html>
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue