Imported Upstream version 2.6.0

docs/man/tripplite.txt

@@ -0,0 +1,60 @@
+TRIPPLITE(8)
+============
+
+NAME
+----
+tripplite - Driver for Tripp-Lite SmartPro UPS equipment
+
+NOTE
+----
+This man page only documents the hardware-specific features of the
+tripplite driver.  For information about the core driver, see
+linkman:nutupsdrv[8].
+
+SUPPORTED HARDWARE
+------------------
+This driver should work on the SmartPro line, including the SMART700
+and SMART700SER.  It only supports SmartPro models that communicate
+using the serial port.
+
+EXTRA ARGUMENTS
+---------------
+This driver supports the following optional settings in the 
+linkman:ups.conf[5]:
+
+*offdelay*='num'::
+Time to wait before the UPS is turned off after the kill power command is
+sent.  The default value is 64 (in seconds).
+
+*rebootdelay*='num'::
+Set the timer before the UPS is cycled after the reboot command is sent.
+The default value is 64 (in seconds).
+
+*startdelay*='num'::
+Set the time that the UPS waits before it turns itself back on after a
+reboot command.  The default value is 60 (in seconds).
+
+KNOWN ISSUES AND BUGS
+---------------------
+Battery charge information may not be correct for all UPSes.  It is tuned
+to be correct for a SMART700SER.  Other models may not provide correct
+information.  Information from the manufacturer would be helpful.
+
+AUTHORS
+-------
+Rickard E. (Rik) Faith, Nicholas Kain
+
+SEE ALSO
+--------
+
+The core driver:
+~~~~~~~~~~~~~~~~
+linkman:nutupsdrv[8]
+
+Other drivers for Tripp-Lite hardware:
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+linkman:tripplitesu[8], linkman:tripplite_usb[8], linkman:usbhid-ups[8]
+
+Internet resources:
+~~~~~~~~~~~~~~~~~~~
+The NUT (Network UPS Tools) home page: http://www.networkupstools.org/