Imported Upstream version 2.6.2

ChangeLog

@@ -1,3 +1,438 @@
+2011-09-15  Arnaud Quette <arnaud.quette@free.fr>
+
+	* [r3238] drivers/nut-ipmipsu.c, drivers/nut-libfreeipmi.c: Don't
+	  override PSU absence with the power failure flag
+	* [r3237] NEWS, UPGRADING, configure.in, docs/download.txt,
+	  docs/website/news.txt: Final update for 2.6.2 release
+	* [r3236] docs/configure.txt: Complete the minimum FreeIPMI version
+	  required
+	* [r3235] tools/nut-scanner: Mark remaining generated files as a
+	  Subversion ignored files (no functional changes)
+
+2011-09-15  Frederic Bohe <fbohe-guest@alioth.debian.org>
+
+	* [r3234] tools/nut-scanner/scan_nut.c: Conditional inclusion of
+	  pthread.h
+	* [r3233] tools/nut-scanner/nut-scanner.c,
+	  tools/nut-scanner/nutscan-display.c,
+	  tools/nut-scanner/scan_avahi.c, tools/nut-scanner/scan_ipmi.c,
+	  tools/nut-scanner/scan_nut.c, tools/nut-scanner/scan_usb.c,
+	  tools/nut-scanner/scan_xml_http.c: config.h is included in
+	  common.h, so only include common.h
+	* [r3232] include/parseconf.h: We need stdio.h because we use FILE
+	  type.
+
+2011-09-15  Arnaud Quette <arnaud.quette@free.fr>
+
+	* [r3231] docs/man: Mark remaining generated manual pages as a
+	  Subversion ignored files (no functional changes)
+	* [r3230] docs/man/nut-ipmipsu.txt, drivers/nut-ipmi.h,
+	  drivers/nut-ipmipsu.c, drivers/nut-libfreeipmi.c,
+	  m4/nut_check_libfreeipmi.m4: Complete nut-ipmipsu, by adding
+	  sensors discovery and monitoring
+
+2011-09-14  Frederic Bohe <fbohe-guest@alioth.debian.org>
+
+	* [r3229] tools/nut-scanner/scan_snmp.c: Remove use of strndup.
+	  This is not supported on Solaris.
+
+2011-09-14  Charles Lepple <clepple+nut@gmail.com>
+
+	* [r3228] tools/nut-scanner/scan_snmp.c: Remove unbalanced #endif
+	* [r3227] tools/nut-scanner/scan_snmp.c: nut-scanner: use
+	  "common.h", which includes "config.h"
+	* [r3226] tools/nut-scanner/scan_snmp.c,
+	  tools/nut-scanner/scan_usb.c: Include <string.h> for nut-scanner
+	* [r3225] tools/nut-scanner/scan_snmp.c: Silence redefined PACKAGE_
+	  macro warnings
+	  
+	  This should be fixed properly upstream, but in the mean time, the
+	  SNMP-based
+	  tools can't use these macros properly (since they will have the
+	  values for
+	  Net-SNMP, not NUT).
+
+2011-09-14  Frederic Bohe <fbohe-guest@alioth.debian.org>
+
+	* [r3224] tools/nut-scanner/nutscan-ip.c: Get rid of s6_addr32 in
+	  IPv6 code since it is implementation specific. Replaced by
+	  s6_addr. ( thanks to Charles Lepple)
+
+2011-09-14  Arnaud Quette <arnaud.quette@free.fr>
+
+	* [r3223] drivers: Mark apcsmart-old binary as a Subversion ignored
+	  file (no functional changes)
+
+2011-09-14  Emilien Kia <emilienkia-guest@alioth.debian.org>
+
+	* [r3222]
+	  scripts/java/jNut/src/main/java/org/networkupstools/jnut/Client.java,
+	  scripts/java/jNut/src/main/java/org/networkupstools/jnut/Command.java,
+	  scripts/java/jNut/src/main/java/org/networkupstools/jnut/Device.java,
+	  scripts/java/jNut/src/main/java/org/networkupstools/jnut/NutException.java,
+	  scripts/java/jNut/src/main/java/org/networkupstools/jnut/StringLineSocket.java,
+	  scripts/java/jNut/src/main/java/org/networkupstools/jnut/Variable.java:
+	  Fix mail address typo for javadoc.
+
+2011-09-13  Frederic Bohe <fbohe-guest@alioth.debian.org>
+
+	* [r3221] tools/nut-scanner/Makefile.am: Fix make distcheck-light
+
+2011-09-13  Arnaud Quette <arnaud.quette@free.fr>
+
+	* [r3220] drivers/bcmxcp.c: Fix compilation warning on values
+	  comparison being always false
+	* [r3219] configure.in, tools/nut-scanner/nut-scanner.c: Complete
+	  commit r3218, to address getopt_long too
+	* [r3218] configure.in: Do a second check to ensure inclusion of
+	  getopt.h, in case optind is known
+	* [r3217] drivers/bcmxcp.c, drivers/bcmxcp.h, drivers/bcmxcp_ser.c:
+	  Add support for outlet.n.delay.{start,shutdown}, and use
+	  outlet.n.delay.shutdown for outlet.n.shutdown.return instead of
+	  the default 3 seconds (patch from Rich Wrenn)
+
+2011-09-13  Frederic Bohe <fbohe-guest@alioth.debian.org>
+
+	* [r3216] tools/nut-scanner/nutscan-ip.c: Do not use long long
+	  variable anymore
+	* [r3215] tools/nut-scanner/scan_avahi.c,
+	  tools/nut-scanner/scan_nut.c: Remove all calls to asprintf
+
+2011-09-12  Frederic Bohe <fbohe-guest@alioth.debian.org>
+
+	* [r3214] clients/upsclient.c, clients/upsclient.h, configure.in,
+	  docs/man/Makefile.am, docs/man/nut-scanner.txt,
+	  docs/man/nutscan_add_device_to_device.txt,
+	  docs/man/nutscan_add_option_to_device.txt,
+	  docs/man/nutscan_cidr_to_ip.txt,
+	  docs/man/nutscan_display_parsable.txt,
+	  docs/man/nutscan_display_ups_conf.txt,
+	  docs/man/nutscan_free_device.txt,
+	  docs/man/nutscan_new_device.txt, docs/man/nutscan_scan_avahi.txt,
+	  docs/man/nutscan_scan_ipmi.txt, docs/man/nutscan_scan_nut.txt,
+	  docs/man/nutscan_scan_snmp.txt, docs/man/nutscan_scan_usb.txt,
+	  docs/man/nutscan_scan_xml_http.txt, m4/nut_check_libavahi.m4,
+	  tools/Makefile.am, tools/nut-scanner,
+	  tools/nut-scanner/Makefile.am, tools/nut-scanner/nut-scan.h,
+	  tools/nut-scanner/nut-scanner.c,
+	  tools/nut-scanner/nutscan-device.c,
+	  tools/nut-scanner/nutscan-device.h,
+	  tools/nut-scanner/nutscan-display.c,
+	  tools/nut-scanner/nutscan-ip.c, tools/nut-scanner/nutscan-ip.h,
+	  tools/nut-scanner/scan_avahi.c, tools/nut-scanner/scan_ipmi.c,
+	  tools/nut-scanner/scan_nut.c, tools/nut-scanner/scan_snmp.c,
+	  tools/nut-scanner/scan_usb.c, tools/nut-scanner/scan_xml_http.c,
+	  tools/nut-snmpinfo.py, tools/nut-usbinfo.pl: Add nut-scanner tool
+
+2011-09-12  Michal Soltys <msoltyspl-guest@alioth.debian.org>
+
+	* [r3211] docs/man/Makefile.am, docs/man/apcsmart-old.txt,
+	  docs/man/apcsmart.txt, drivers/Makefile.am,
+	  drivers/apcsmart-old.c, drivers/apcsmart-old.h,
+	  drivers/apcsmart.c, drivers/apcsmart.h, drivers/apcsmart_tabs.c,
+	  drivers/apcsmart_tabs.h: merge updated apcsmart driver from
+	  apcsmart-dev branch
+	  
+	  This commit clones trunk apcsmart to apcsmart-old, and merges
+	  updated driver from apcsmart-dev.
+	  
+	  Both drivers are built and available for the users, should there
+	  be any issues with the new version.
+	  
+	  The driver/table version is also incremented (3.0).
+
+2011-09-12  Charles Lepple <clepple+nut@gmail.com>
+
+	* [r3206] docs/FAQ.txt: Reword rewording in FAQ
+
+2011-09-09  Arnaud Quette <arnaud.quette@free.fr>
+
+	* [r3205] docs/FAQ.txt: Fix wording, that is not appropriate
+	  anymore
+	* [r3204] docs/config-notes.txt: Complete shutdown information on
+	  the "critical UPS" notion
+	* [r3203] docs/download.txt: Add missing comma for OpenWrt
+	* [r3202] docs/stable-hcl.txt: Complete information for reporting
+	  new device
+	* [r3201] drivers/eaton-mib.c, drivers/eaton-mib.h,
+	  drivers/snmp-ups.c: Add a missing Eaton MIB for PDU
+
+2011-09-08  Arnaud Quette <arnaud.quette@free.fr>
+
+	* [r3199] docs/download.txt: Forgotten commit for the new updated
+	  Windows package
+	* [r3198] docs/website/web-layout.conf: Fix XHTML 1.1 compliance
+	  (reported by W3C validators)
+	* [r3196] ., configure.in, m4/nut_check_os.m4, scripts/Makefile.am,
+	  scripts/README, scripts/systemd, scripts/systemd/Makefile.am,
+	  scripts/systemd/README, scripts/systemd/nut-driver.service.in,
+	  scripts/systemd/nut-monitor.service.in,
+	  scripts/systemd/nut-server.service.in,
+	  scripts/systemd/nutshutdown.in: Add initial support for systemd
+	  (patch from Michal Hlavinka)
+
+2011-09-06  Arnaud Quette <arnaud.quette@free.fr>
+
+	* [r3194] drivers/apc-mib.c, drivers/bestpower-mib.c,
+	  drivers/eaton-mib.c, drivers/ietf-mib.c, drivers/mge-mib.c,
+	  drivers/netvision-mib.c, drivers/powerware-mib.c,
+	  drivers/raritan-pdu-mib.c, drivers/snmp-ups.c,
+	  drivers/snmp-ups.h: Add a new initialization method, that uses
+	  sysObjectID (indirection to the main MIB of the device) to detect
+	  supported devices. This speeds up even more init stage and should
+	  render void the use of 'mib' option
+	* [r3193] drivers/snmp-ups.c: Force numeric OIDs resolution, ie do
+	  not resolve to textual names. This is mostly for the convenience
+	  of debug output
+
+2011-09-05  Arnaud Quette <arnaud.quette@free.fr>
+
+	* [r3186] scripts/java/Makefile.am, scripts/java/jNutList/src/test:
+	  Remove test code, since it is bound to jNut and not jNutList
+	  (reported by Emilien Kia)
+	* [r3185] drivers/mge-hid.c: Add support for battery.runtime.low,
+	  and end of battery life (life cycle monitoring) ; along with
+	  measurements (outlet power factor, power, real power and current)
+	  for 5 PX
+	* [r3184] configure.in, scripts/Makefile.am, scripts/java,
+	  scripts/java/Makefile.am: Complete jNut automake integration
+	  (distribution rules)
+
+2011-09-03  Arnaud Quette <arnaud.quette@free.fr>
+
+	* [r3183] docs/man: Mark nut-ipmipsu.html as a Subversion ignored
+	  files (no functional changes)
+
+2011-09-02  Arnaud Quette <arnaud.quette@free.fr>
+
+	* [r3182] docs/new-clients.txt: Fix jNut Asciidoc integration
+	* [r3181] docs/download.txt, docs/new-clients.txt,
+	  docs/website/news.txt, scripts/README, scripts/java/README,
+	  scripts/java/jNut/README, scripts/java/jNutList/README: Integrate
+	  jNUT information in the developer guide, along with news and
+	  download section
+	* [r3180] docs/website/news.txt: Add the Beta NUT 2.6.1-1 package
+	  for Windows, and some news history (just intended for VCS
+	  history)
+	* [r3179] docs/website/projects.txt: Formatting fixes
+
+2011-09-02  Emilien Kia <emilienkia-guest@alioth.debian.org>
+
+	* [r3178] scripts/java, scripts/java/README, scripts/java/jNut,
+	  scripts/java/jNut/README, scripts/java/jNut/pom.xml,
+	  scripts/java/jNut/src, scripts/java/jNut/src/main,
+	  scripts/java/jNut/src/main/java,
+	  scripts/java/jNut/src/main/java/org,
+	  scripts/java/jNut/src/main/java/org/networkupstools,
+	  scripts/java/jNut/src/main/java/org/networkupstools/jnut,
+	  scripts/java/jNut/src/main/java/org/networkupstools/jnut/Client.java,
+	  scripts/java/jNut/src/main/java/org/networkupstools/jnut/Command.java,
+	  scripts/java/jNut/src/main/java/org/networkupstools/jnut/Device.java,
+	  scripts/java/jNut/src/main/java/org/networkupstools/jnut/NutException.java,
+	  scripts/java/jNut/src/main/java/org/networkupstools/jnut/StringLineSocket.java,
+	  scripts/java/jNut/src/main/java/org/networkupstools/jnut/Variable.java,
+	  scripts/java/jNut/src/main/resources, scripts/java/jNut/src/test,
+	  scripts/java/jNut/src/test/java,
+	  scripts/java/jNut/src/test/java/org,
+	  scripts/java/jNut/src/test/java/org/networkupstools,
+	  scripts/java/jNut/src/test/java/org/networkupstools/jnut,
+	  scripts/java/jNut/src/test/java/org/networkupstools/jnut/ClientTest.java,
+	  scripts/java/jNutList, scripts/java/jNutList/README,
+	  scripts/java/jNutList/pom.xml, scripts/java/jNutList/src,
+	  scripts/java/jNutList/src/main,
+	  scripts/java/jNutList/src/main/java,
+	  scripts/java/jNutList/src/main/java/org,
+	  scripts/java/jNutList/src/main/java/org/networkupstools,
+	  scripts/java/jNutList/src/main/java/org/networkupstools/jnutlist,
+	  scripts/java/jNutList/src/main/java/org/networkupstools/jnutlist/AppList.java,
+	  scripts/java/jNutList/src/main/resources,
+	  scripts/java/jNutList/src/test,
+	  scripts/java/jNutList/src/test/java,
+	  scripts/java/jNutList/src/test/java/org,
+	  scripts/java/jNutList/src/test/java/org/networkupstools,
+	  scripts/java/jNutList/src/test/java/org/networkupstools/jnuttest,
+	  scripts/java/jNutList/src/test/java/org/networkupstools/jnuttest/AppTest.java:
+	  Add jNut (NUT client in Java) to trunk.
+
+2011-09-02  Arnaud Quette <arnaud.quette@free.fr>
+
+	* [r3174] drivers/main.c: Remove extraneous empty line
+
+2011-08-31  Emilien Kia <emilienkia-guest@alioth.debian.org>
+
+	* [r3173] drivers/usb-common.c: Fix pointer check on wrong variable
+	  (Patch from Thomas Jarosch)
+	* [r3172] drivers/mge-utalk.c: Fix use of uninitialized variable
+	  (Patch from Thomas Jarosch)
+	* [r3171] common/common.c: Fix file descriptor leak (Patch from
+	  Thomas Jarosch)
+
+2011-08-29  Arnaud Quette <arnaud.quette@free.fr>
+
+	* [r3164] drivers/mge-hid.c: Add region/country management, to
+	  improve features provided such as 'output.voltage.nominal' and 3S
+	  Eco control
+	* [r3163] data/driver.list.in, drivers/mge-hid.c: Add Eaton 3S to
+	  the list of usbhid-ups supported models
+
+2011-08-25  Arnaud Quette <arnaud.quette@free.fr>
+
+	* [r3160] docs/nut-names.txt: Fix duplication
+
+2011-08-20  Charles Lepple <clepple+nut@gmail.com>
+
+	* [r3158] m4/nut_report_feature.m4: Avoid implementation-specific
+	  use of "echo" in autoconf
+	  
+	  http://pubs.opengroup.org/onlinepubs/009695399/utilities/echo.html
+
+2011-08-05  Charles Lepple <clepple+nut@gmail.com>
+
+	* [r3150] configure.in: configure.in: minor changes to output
+	  
+	  * Capitalized "UPS"
+	  * --with-drivers= : Only *build* specific drivers
+
+2011-07-30  Arnaud Quette <arnaud.quette@free.fr>
+
+	* [r3149] data/driver.list.in: Add Cyber Power Systems CP1000AVRLCD
+	  to the list of usbhid-ups supported models (reported by David C.
+	  Rankin)
+
+2011-07-28  Arnaud Quette <arnaud.quette@free.fr>
+
+	* [r3148] tools/nut-usbinfo.pl: Proper fix to r3012, which
+	  satisfies both udev and upower
+
+2011-07-27  Arnaud Quette <arnaud.quette@free.fr>
+
+	* [r3147] tools/nut-usbinfo.pl: Partially revert r3012. It caused a
+	  udev regression, with several missing USB IDs (thanks to Pawel
+	  Sikora for uncovering it)
+	* [r3146] scripts/augeas/README: Add a complete Python Augeas
+	  example code
+
+2011-07-26  Arnaud Quette <arnaud.quette@free.fr>
+
+	* [r3145] configure.in, docs/man/nut-ipmipsu.txt, scripts/udev,
+	  scripts/udev/Makefile.am, scripts/udev/README,
+	  scripts/udev/nut-ipmipsu.rules.in: Add udev rules file and
+	  documentation for nut-ipmipsu
+	* [r3144] m4/nut_check_libfreeipmi.m4: Improve detection of the
+	  needed functions
+	* [r3143] data/driver.list.in: Add Orvaldi 750 / 900SP to the list
+	  of blazer_usb supported models (reported by Pawel Sikora)
+	* [r3142] drivers/nut-ipmipsu.c: Fix missing comment closure, add a
+	  TODO list and remove unused variables
+
+2011-07-21  Charles Lepple <clepple+nut@gmail.com>
+
+	* [r3141] tools/git-svn.authors: Added authors file for git-svn
+	  synchronization
+
+2011-07-19  Arnaud Quette <arnaud.quette@free.fr>
+
+	* [r3140] data/driver.list.in: Add POWEREX VI 1000 LED to the list
+	  of blazer_usb supported models (reported by Sergey Talchuk)
+
+2011-07-17  Arnaud Quette <arnaud.quette@free.fr>
+
+	* [r3139] data/driver.list.in: Add SVEN Power Pro+ series (USB ID
+	  ffff:0000) to the list of blazer_usb supported models (reported
+	  by Vlad)
+
+2011-07-16  Arnaud Quette <arnaud.quette@free.fr>
+
+	* [r3138] configure.in: Fix --with-[free]ipmi configure option so
+	  that it actually behave correctly in automatic detection mode
+
+2011-07-14  Arnaud Quette <arnaud.quette@free.fr>
+
+	* [r3137] configure.in: Fix the typo that made its way into commit
+	  r3136, and broke configure
+	* [r3136] configure.in, docs/configure.txt, docs/man,
+	  docs/man/Makefile.am, docs/man/nut-ipmipsu.txt, drivers,
+	  drivers/Makefile.am, drivers/nut-ipmi.h, drivers/nut-ipmipsu.c,
+	  drivers/nut-libfreeipmi.c, m4/nut_check_libfreeipmi.m4: First
+	  attempt to create a driver to monitor power supply units using
+	  IPMI. This preliminary version only reads FRU (Field Replace
+	  Unit) information, but not yet the sensor information (describing
+	  if the PSU is present and online), and includes base
+	  documentation (manpage and configure options). It currently
+	  supports GNU FreeIPMI, but uses an abstract IPMI implementation
+	  that will allow to use other IPMI toolkits
+
+2011-07-13  Arnaud Quette <arnaud.quette@free.fr>
+
+	* [r3135] docs/configure.txt: Move several misplaced options to the
+	  right sections
+	* [r3132] drivers/bestfcom.c: Remove unused variables (patch from
+	  Regid Ichira, Debian bug #633756)
+
+2011-07-12  Arnaud Quette <arnaud.quette@free.fr>
+
+	* [r3131] MAINTAINERS: Update the corporate mail address and some
+	  details
+
+2011-07-08  Charles Lepple <clepple+nut@gmail.com>
+
+	* [r3129] docs/acknowledgements.txt: Fix typo in link on
+	  Acknowledgements page
+
+2011-07-07  Arnaud Quette <arnaud.quette@free.fr>
+
+	* [r3127] docs/acknowledgements.txt: Move Arjen de Korte, NUT
+	  Senior lieutenant, to the Retired members section. Thanks for all
+	  his years of dedication to make NUT better
+
+2011-07-01  Arjen de Korte <adkorte-guest@alioth.debian.org>
+
+	* [r3115] MAINTAINERS: It's been fun, but I feel the time has come
+	  to say farewell. All the best...
+
+2011-06-29  Arnaud Quette <arnaud.quette@free.fr>
+
+	* [r3109] configure.in, scripts/Makefile.am, scripts/avahi,
+	  scripts/avahi/nut.service.in: Add Avahi support for NUT mDNS
+	  publication, using a static service file
+	* [r3106] tools/svn2cl.authors: Add missing committers, and reorder
+	  using the Project Member List:
+	  https://alioth.debian.org/project/memberlist.php?group_id=30602
+
+2011-06-28  Arnaud Quette <arnaud.quette@free.fr>
+
+	* [r3105] data/driver.list.in: Add various models equiped with APC
+	  AP9618 management card, including APC Smart-UPS RT XL, to the
+	  list of snmp-ups supported models (reported by Angela Williams)
+
+2011-06-23  Arjen de Korte <adkorte-guest@alioth.debian.org>
+
+	* [r3057] drivers/main.c: Try to prevent that drivers are started
+	  multiple times for the same UPS.
+
+2011-06-17  Arjen de Korte <adkorte-guest@alioth.debian.org>
+
+	* [r3047] docs/man/blazer.txt, drivers/blazer.c: Add preselection
+	  of communication protocol used
+
+2011-06-16  Frederic Bohe <fbohe-guest@alioth.debian.org>
+
+	* [r3045] drivers/snmp-ups.c: Fix SNMP v3 session initialisation
+
+2011-06-08  Arnaud Quette <arnaud.quette@free.fr>
+
+	* [r3037] docs/website/web-layout.conf: Update the Firefox download
+	  button, since the previous one has disappeared
+	* [r3036] docs/website/news.txt, docs/website/projects.txt: Add a
+	  news entry, and a reference in the Related projects, on Dell
+	  PowerVault NX3500, which uses NUT for power protection (approved
+	  by Dell)
+
+2011-06-04  Arnaud Quette <arnaud.quette@free.fr>
+
+	* [r3026] data/driver.list.in: Add PowerWalker VI 850 LCD to the
+	  list of blazer_usb supported models (reported by Wayne Thomas)
+
 2011-06-01  Arnaud Quette <arnaud.quette@free.fr>
 
 	* [r3023] docs/download.txt: Add the missing SHA-256 sum on the
@@ -51,7 +486,7 @@
 	* [r3002] server/netinstcmd.c: Fix the missing 'extra value'
 	  handling for instant commands
 
-2011-05-24  msoltyspl-guest
+2011-05-24  Michal Soltys <msoltyspl-guest@alioth.debian.org>
 
 	* [r2997] drivers/apcsmart.c: apcmsart.c: fix
 	  upsdrv_shutdown_advanced() - with 'continue' statement, sdcmd_*s
@@ -136,7 +571,7 @@
 	  
 	  [http://lists.alioth.debian.org/pipermail/nut-upsuser/2011-March/006770.html]
 
-2011-03-31  fbohe-guest
+2011-03-31  Frederic Bohe <fbohe-guest@alioth.debian.org>
 
 	* [r2962] data/driver.list.in, drivers/mge-hid.c: Add Eaton
 	  Powerware 9140 to the list of usbhid-ups supported models
@@ -153,7 +588,7 @@
 	  which cause unresolved symbol on libupsclient users (reported by
 	  Fabrice Coutadeur on Ubuntu)
 
-2011-03-23  fbohe-guest
+2011-03-23  Frederic Bohe <fbohe-guest@alioth.debian.org>
 
 	* [r2957] INSTALL: Reverting previous commit (should not be in the
 	  trunk)
@@ -341,7 +776,7 @@
 	* [r2891] drivers/dummy-ups.c: Prefer 'snprintf' and 'snprintfcat'
 	  over 'strncat' (the latter can overflow the destination buffer)
 
-2011-02-09  fbohe-guest
+2011-02-09  Frederic Bohe <fbohe-guest@alioth.debian.org>
 
 	* [r2888] drivers/dummy-ups.c: Fix a memory leak in dummy-ups
 	  driver

MAINTAINERS

@@ -37,13 +37,9 @@ S: Maintained: apcsmart, belkin, bestups, cyberpower, dummycons,
 
 P: Arnaud Quette
 M: aquette.dev@gmail.com
-M: arnaud.quette@mgeups.com
+M: ArnaudQuette@eaton.com
 S: Maintained or Supported: dummy-ups, usbhid-ups, mge-shut, newmge-shut
-                            mge-utalk, snmp-ups, HAL support
+                            mge-utalk, snmp-ups, ...
-
-P: Arjen de Korte
-M: arjen@de-korte.org
-S: Maintained: safenet, genericups, powerpanel, netxml-ups, usbhid-ups
 
 P: Fabio Di Niro
 M: blaxwan@users.sourceforge.net

Makefile.in

@@ -38,7 +38,8 @@ host_triplet = @host@
 target_triplet = @target@
 subdir = .
 DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
-	$(srcdir)/Makefile.in $(top_srcdir)/configure AUTHORS COPYING \
+	$(srcdir)/Makefile.in $(top_srcdir)/configure \
+	$(top_srcdir)/scripts/avahi/nut.service.in AUTHORS COPYING \
 	ChangeLog INSTALL NEWS TODO compile config.guess config.sub \
 	depcomp install-sh ltmain.sh missing
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
@@ -48,6 +49,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ax_compare_version.m4 \
 	$(top_srcdir)/m4/lt~obsolete.m4 \
 	$(top_srcdir)/m4/nut_arg_with.m4 \
 	$(top_srcdir)/m4/nut_check_asciidoc.m4 \
+	$(top_srcdir)/m4/nut_check_libavahi.m4 \
+	$(top_srcdir)/m4/nut_check_libfreeipmi.m4 \
 	$(top_srcdir)/m4/nut_check_libgd.m4 \
 	$(top_srcdir)/m4/nut_check_libhal.m4 \
 	$(top_srcdir)/m4/nut_check_libneon.m4 \
@@ -67,7 +70,7 @@ am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
  configure.lineno config.status.lineno
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/include/config.h
-CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_FILES = scripts/avahi/nut.service
 CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
@@ -166,10 +169,14 @@ INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 LD = @LD@
 LDFLAGS = @LDFLAGS@
+LIBAVAHI_CFLAGS = @LIBAVAHI_CFLAGS@
+LIBAVAHI_LIBS = @LIBAVAHI_LIBS@
 LIBGD_CFLAGS = @LIBGD_CFLAGS@
 LIBGD_LDFLAGS = @LIBGD_LDFLAGS@
 LIBHAL_CFLAGS = @LIBHAL_CFLAGS@
 LIBHAL_LIBS = @LIBHAL_LIBS@
+LIBIPMI_CFLAGS = @LIBIPMI_CFLAGS@
+LIBIPMI_LIBS = @LIBIPMI_LIBS@
 LIBNEON_CFLAGS = @LIBNEON_CFLAGS@
 LIBNEON_LIBS = @LIBNEON_LIBS@
 LIBNETSNMP_CFLAGS = @LIBNETSNMP_CFLAGS@
@@ -207,6 +214,10 @@ PACKAGE_TARNAME = @PACKAGE_TARNAME@
 PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PORT = @PORT@
 RANLIB = @RANLIB@
 RUN_AS_GROUP = @RUN_AS_GROUP@
 RUN_AS_USER = @RUN_AS_USER@
@@ -271,6 +282,8 @@ sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
 sysconfdir = @sysconfdir@
+systemdsystemshutdowndir = @systemdsystemshutdowndir@
+systemdsystemunitdir = @systemdsystemunitdir@
 target = @target@
 target_alias = @target_alias@
 target_cpu = @target_cpu@
@@ -349,6 +362,8 @@ $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
 $(am__aclocal_m4_deps):
+scripts/avahi/nut.service: $(top_builddir)/config.status $(top_srcdir)/scripts/avahi/nut.service.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
 
 mostlyclean-libtool:
 	-rm -f *.lo

NEWS

@@ -2,6 +2,79 @@ If you're upgrading from an earlier version, see the UPGRADING file.
 
 For a complete list of changes, please refer to the ChangeLog file.
 
+---------------------------------------------------------------------------
+Release notes for NUT 2.6.2 - what's new since 2.6.1:
+
+ - NUT can now monitor power supply units (PSU) in servers, through IPMI, using
+   the new experimental 'nut-ipmipsu' driver. Users are encouraged to test it,
+   and send feedback and debug output to the development mailing list.
+   This requires GNU FreeIPMI (0.8.5 or higher) development package or files.
+   Thanks goes to Al Chu, FreeIPMI project leader, for his help during this
+   development.
+
+ - NUT now provides a tool, called 'nut-scanner', to discover supported devices,
+   both local and remote. nut-scanner will help to ease the configuration step,
+   and power infrastructure discovery.
+   This development, sponsored by Eaton, supports the following methods:
+   * USB,
+   * SNMP,
+   * XML/HTTP (from Eaton),
+   * NUT servers, using the classic connect or Avahi / mDNS methods.
+   
+   IPMI support will be added in the next release.
+   A separate library, called 'libnutscan', is also available to provide these
+   feature. Future NUT releases will provides binding for the supported
+   languages (Perl, Python and Java).
+
+ - NUT now provides a Java interface called 'jNut'.
+   This development, sponsored by Eaton, is currently limited to the client
+   interface. But it will be broaden to device discovery and configuration in
+   the future.
+   For more info, refer to nut/scripts/java/README, or the developer guide
+   (chapter 'Creating new client'). Javadoc documentation is also provided,
+   along with Java archives (.jar) in the Download section. 
+
+ - support for new devices: Eaton 3S ; Cyber Power Systems CP1000AVRLCD ; 
+   various APC models equiped with APC AP9618 management card, including APC
+   Smart-UPS RT XL ;  Orvaldi 750 / 900SP ; POWEREX VI 1000 LED ; PowerWalker
+   VI 850 LCD ; SVEN Power Pro+ series (USB ID ffff:0000).
+
+ - A regression has been fixed in udev rules file. This previously caused
+   permission issues to owners of some USB devices.
+
+ - Avahi support has been added, for NUT mDNS publication, through a static
+   service file (nut/scripts/avahi/nut.service).
+
+ - usbhid-ups has had Eaton completion: some features have been improved, such
+   as 'output.voltage.nominal' ; 3S Eco control support has been added, along
+   with battery.runtime.low and end of battery life (life cycle monitoring)
+   support ; new measurements for 5 PX are also supported now (outlet power
+   factor, power, real power and current).
+
+ - apcsmart has been updated to support more variables and features ; the
+   previous driver is however still available as 'apcsmart-old', in case of
+   issues.
+
+ - bcmxcp now supports per outlet startup and shutdown delays setting ; shutdown
+   delay is also used, when available, for outlet.n.shutdown.return instead of
+   the default 3 seconds.
+
+ - snmp-ups.c has a new initialization method, that uses sysObjectID, which is
+   a pointer to the prefered MIB of the device, to detect supported devices.
+   This speeds up even more init stage and should render void the use of 'mib'
+   option. SNMP v3 session initialisation has also been fixed, and Eaton PDU
+   support has been completed.
+
+ - Initial support has been added for systemd, the System and Service Manager
+   from RedHat.
+
+ - The chapter 'NUT configuration management with Augeas' of the developer guide
+   has received some completion: a complete Python Augeas example code is now
+   provided.
+
+ - Finally, after years of dedication to NUT, Arjen de Korte is now retired.
+   Sincere thanks to you Arjen from us all.
+ 
 ---------------------------------------------------------------------------
 Release notes for NUT 2.6.1 - what's new since 2.6.0:
 

UPGRADING

@@ -7,6 +7,12 @@ This file lists changes that affect users who installed older versions
 of this software.  When upgrading from an older version, be sure to
 check this file to see if you need to make changes to your system.
 
+Changes from 2.6.1 to 2.6.2
+---------------------------
+
+- apcsmart driver has been replaced by a new implementation. In case of issue
+with this new version, users can revert to apcsmart-old.
+
 Changes from 2.6.0 to 2.6.1
 ---------------------------
 

aclocal.m4

@@ -126,6 +126,164 @@ AC_DEFUN([_AC_TYPE_LONG_LONG_SNIPPET],
               | (ullmax / ull) | (ullmax % ull));]])
 ])
 
+# pkg.m4 - Macros to locate and utilise pkg-config.            -*- Autoconf -*-
+# serial 1 (pkg-config-0.24)
+# 
+# Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# PKG_PROG_PKG_CONFIG([MIN-VERSION])
+# ----------------------------------
+AC_DEFUN([PKG_PROG_PKG_CONFIG],
+[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
+m4_pattern_allow([^PKG_CONFIG(_PATH)?$])
+AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])
+AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path])
+AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path])
+
+if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
+	AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
+fi
+if test -n "$PKG_CONFIG"; then
+	_pkg_min_version=m4_default([$1], [0.9.0])
+	AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
+	if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
+		AC_MSG_RESULT([yes])
+	else
+		AC_MSG_RESULT([no])
+		PKG_CONFIG=""
+	fi
+fi[]dnl
+])# PKG_PROG_PKG_CONFIG
+
+# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+#
+# Check to see whether a particular set of modules exists.  Similar
+# to PKG_CHECK_MODULES(), but does not set variables or print errors.
+#
+# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+# only at the first occurence in configure.ac, so if the first place
+# it's called might be skipped (such as if it is within an "if", you
+# have to call PKG_CHECK_EXISTS manually
+# --------------------------------------------------------------
+AC_DEFUN([PKG_CHECK_EXISTS],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+if test -n "$PKG_CONFIG" && \
+    AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
+  m4_default([$2], [:])
+m4_ifvaln([$3], [else
+  $3])dnl
+fi])
+
+# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
+# ---------------------------------------------
+m4_define([_PKG_CONFIG],
+[if test -n "$$1"; then
+    pkg_cv_[]$1="$$1"
+ elif test -n "$PKG_CONFIG"; then
+    PKG_CHECK_EXISTS([$3],
+                     [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`],
+		     [pkg_failed=yes])
+ else
+    pkg_failed=untried
+fi[]dnl
+])# _PKG_CONFIG
+
+# _PKG_SHORT_ERRORS_SUPPORTED
+# -----------------------------
+AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+        _pkg_short_errors_supported=yes
+else
+        _pkg_short_errors_supported=no
+fi[]dnl
+])# _PKG_SHORT_ERRORS_SUPPORTED
+
+
+# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
+# [ACTION-IF-NOT-FOUND])
+#
+#
+# Note that if there is a possibility the first call to
+# PKG_CHECK_MODULES might not happen, you should be sure to include an
+# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
+#
+#
+# --------------------------------------------------------------
+AC_DEFUN([PKG_CHECK_MODULES],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
+AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
+
+pkg_failed=no
+AC_MSG_CHECKING([for $1])
+
+_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
+_PKG_CONFIG([$1][_LIBS], [libs], [$2])
+
+m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
+and $1[]_LIBS to avoid the need to call pkg-config.
+See the pkg-config man page for more details.])
+
+if test $pkg_failed = yes; then
+   	AC_MSG_RESULT([no])
+        _PKG_SHORT_ERRORS_SUPPORTED
+        if test $_pkg_short_errors_supported = yes; then
+	        $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1`
+        else 
+	        $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors "$2" 2>&1`
+        fi
+	# Put the nasty error message in config.log where it belongs
+	echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
+
+	m4_default([$4], [AC_MSG_ERROR(
+[Package requirements ($2) were not met:
+
+$$1_PKG_ERRORS
+
+Consider adjusting the PKG_CONFIG_PATH environment variable if you
+installed software in a non-standard prefix.
+
+_PKG_TEXT])[]dnl
+        ])
+elif test $pkg_failed = untried; then
+     	AC_MSG_RESULT([no])
+	m4_default([$4], [AC_MSG_FAILURE(
+[The pkg-config script could not be found or is too old.  Make sure it
+is in your PATH or set the PKG_CONFIG environment variable to the full
+path to pkg-config.
+
+_PKG_TEXT
+
+To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl
+        ])
+else
+	$1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
+	$1[]_LIBS=$pkg_cv_[]$1[]_LIBS
+        AC_MSG_RESULT([yes])
+	$3
+fi[]dnl
+])# PKG_CHECK_MODULES
+
 # Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
@@ -1139,6 +1297,8 @@ m4_include([m4/ltversion.m4])
 m4_include([m4/lt~obsolete.m4])
 m4_include([m4/nut_arg_with.m4])
 m4_include([m4/nut_check_asciidoc.m4])
+m4_include([m4/nut_check_libavahi.m4])
+m4_include([m4/nut_check_libfreeipmi.m4])
 m4_include([m4/nut_check_libgd.m4])
 m4_include([m4/nut_check_libhal.m4])
 m4_include([m4/nut_check_libneon.m4])

clients/Makefile.in

@@ -59,6 +59,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ax_compare_version.m4 \
 	$(top_srcdir)/m4/lt~obsolete.m4 \
 	$(top_srcdir)/m4/nut_arg_with.m4 \
 	$(top_srcdir)/m4/nut_check_asciidoc.m4 \
+	$(top_srcdir)/m4/nut_check_libavahi.m4 \
+	$(top_srcdir)/m4/nut_check_libfreeipmi.m4 \
 	$(top_srcdir)/m4/nut_check_libgd.m4 \
 	$(top_srcdir)/m4/nut_check_libhal.m4 \
 	$(top_srcdir)/m4/nut_check_libneon.m4 \
@@ -229,10 +231,14 @@ INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 LD = @LD@
 LDFLAGS = @LDFLAGS@
+LIBAVAHI_CFLAGS = @LIBAVAHI_CFLAGS@
+LIBAVAHI_LIBS = @LIBAVAHI_LIBS@
 LIBGD_CFLAGS = @LIBGD_CFLAGS@
 LIBGD_LDFLAGS = @LIBGD_LDFLAGS@
 LIBHAL_CFLAGS = @LIBHAL_CFLAGS@
 LIBHAL_LIBS = @LIBHAL_LIBS@
+LIBIPMI_CFLAGS = @LIBIPMI_CFLAGS@
+LIBIPMI_LIBS = @LIBIPMI_LIBS@
 LIBNEON_CFLAGS = @LIBNEON_CFLAGS@
 LIBNEON_LIBS = @LIBNEON_LIBS@
 LIBNETSNMP_CFLAGS = @LIBNETSNMP_CFLAGS@
@@ -270,6 +276,10 @@ PACKAGE_TARNAME = @PACKAGE_TARNAME@
 PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PORT = @PORT@
 RANLIB = @RANLIB@
 RUN_AS_GROUP = @RUN_AS_GROUP@
 RUN_AS_USER = @RUN_AS_USER@
@@ -334,6 +344,8 @@ sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
 sysconfdir = @sysconfdir@
+systemdsystemshutdowndir = @systemdsystemshutdowndir@
+systemdsystemunitdir = @systemdsystemunitdir@
 target = @target@
 target_alias = @target_alias@
 target_cpu = @target_cpu@

clients/upsclient.c

@@ -30,6 +30,7 @@
 #include <sys/socket.h>
 #include <netinet/in.h>
 #include <arpa/inet.h>
+#include <fcntl.h>
 
 #include "upsclient.h"
 #include "timehead.h"
@@ -393,12 +394,17 @@ int upscli_sslcert(UPSCONN_t *ups, const char *file, const char *path, int verif
 
 #endif	/* HAVE_SSL */
 
-int upscli_connect(UPSCONN_t *ups, const char *host, int port, int flags)
+int upscli_tryconnect(UPSCONN_t *ups, const char *host, int port, int flags,struct timeval * timeout)
 {
 	int	sock_fd;
 	struct addrinfo	hints, *res, *ai;
 	char			sport[NI_MAXSERV];
 	int			v;
+	fd_set 			wfds;
+	int			ret;
+	int			error;
+	socklen_t		error_size;
+	long			fd_flags;
 
 	if (!ups) {
 		return -1;
@@ -466,7 +472,37 @@ int upscli_connect(UPSCONN_t *ups, const char *host, int port, int flags)
 			continue;
 		}
 
+		/* non blocking connect */
+		if(timeout != NULL) {
+			fd_flags = fcntl(sock_fd, F_GETFL);
+			fd_flags |= O_NONBLOCK;
+			fcntl(sock_fd, F_SETFL, fd_flags);
+		}
+
 		while ((v = connect(sock_fd, ai->ai_addr, ai->ai_addrlen)) < 0) {
+			if(errno == EINPROGRESS) {
+				FD_ZERO(&wfds);
+				FD_SET(sock_fd, &wfds);
+				ret = select(sock_fd+1,NULL,&wfds,NULL,
+						timeout);
+				if (FD_ISSET(sock_fd, &wfds)) {
+					error_size = sizeof(error);
+					getsockopt(sock_fd,SOL_SOCKET,SO_ERROR,
+							&error,&error_size);
+					if( error == 0) {
+						/* connect successful */
+						v = 0;
+						break;
+					}
+					errno = error;
+				}
+				else {
+					/* Timeout */
+					v = -1;
+					break;
+				}
+			}
+
 			switch (errno)
 			{
 			case EAFNOSUPPORT:
@@ -486,6 +522,13 @@ int upscli_connect(UPSCONN_t *ups, const char *host, int port, int flags)
 			continue;
 		}
 
+		/* switch back to blocking operation */
+		if(timeout != NULL) {
+			fd_flags = fcntl(sock_fd, F_GETFL);
+			fd_flags &= ~O_NONBLOCK;
+			fcntl(sock_fd, F_SETFL, fd_flags);
+		}
+
 		ups->fd = sock_fd;
 		ups->upserror = 0;
 		ups->syserrno = 0;
@@ -529,6 +572,11 @@ int upscli_connect(UPSCONN_t *ups, const char *host, int port, int flags)
 	return 0;
 }
 
+int upscli_connect(UPSCONN_t *ups, const char *host, int port, int flags)
+{
+	return upscli_tryconnect(ups,host,port,flags,NULL);
+}
+
 /* map upsd error strings back to upsclient internal numbers */
 static struct {
 	int	errnum;

clients/upsclient.h

@@ -65,6 +65,8 @@ typedef struct {
 
 const char *upscli_strerror(UPSCONN_t *ups);
 
+int upscli_tryconnect(UPSCONN_t *ups, const char *host, int port, int flags, struct timeval *tv);
+
 int upscli_connect(UPSCONN_t *ups, const char *host, int port, int flags);
 
 /* --- functions that only use the new names --- */

common/Makefile.in

@@ -47,6 +47,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ax_compare_version.m4 \
 	$(top_srcdir)/m4/lt~obsolete.m4 \
 	$(top_srcdir)/m4/nut_arg_with.m4 \
 	$(top_srcdir)/m4/nut_check_asciidoc.m4 \
+	$(top_srcdir)/m4/nut_check_libavahi.m4 \
+	$(top_srcdir)/m4/nut_check_libfreeipmi.m4 \
 	$(top_srcdir)/m4/nut_check_libgd.m4 \
 	$(top_srcdir)/m4/nut_check_libhal.m4 \
 	$(top_srcdir)/m4/nut_check_libneon.m4 \
@@ -135,10 +137,14 @@ INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 LD = @LD@
 LDFLAGS = @LDFLAGS@
+LIBAVAHI_CFLAGS = @LIBAVAHI_CFLAGS@
+LIBAVAHI_LIBS = @LIBAVAHI_LIBS@
 LIBGD_CFLAGS = @LIBGD_CFLAGS@
 LIBGD_LDFLAGS = @LIBGD_LDFLAGS@
 LIBHAL_CFLAGS = @LIBHAL_CFLAGS@
 LIBHAL_LIBS = @LIBHAL_LIBS@
+LIBIPMI_CFLAGS = @LIBIPMI_CFLAGS@
+LIBIPMI_LIBS = @LIBIPMI_LIBS@
 LIBNEON_CFLAGS = @LIBNEON_CFLAGS@
 LIBNEON_LIBS = @LIBNEON_LIBS@
 LIBNETSNMP_CFLAGS = @LIBNETSNMP_CFLAGS@
@@ -176,6 +182,10 @@ PACKAGE_TARNAME = @PACKAGE_TARNAME@
 PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PORT = @PORT@
 RANLIB = @RANLIB@
 RUN_AS_GROUP = @RUN_AS_GROUP@
 RUN_AS_USER = @RUN_AS_USER@
@@ -240,6 +250,8 @@ sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
 sysconfdir = @sysconfdir@
+systemdsystemshutdowndir = @systemdsystemshutdowndir@
+systemdsystemunitdir = @systemdsystemunitdir@
 target = @target@
 target_alias = @target_alias@
 target_cpu = @target_cpu@

common/common.c

@@ -244,6 +244,7 @@ int sendsignalfn(const char *pidfn, int sig)
 
 	if (fgets(buf, sizeof(buf), pidf) == NULL) {
 		upslogx(LOG_NOTICE, "Failed to read pid from %s", pidfn);
+		fclose(pidf);
 		return -1;
 	}	
 
@@ -251,6 +252,7 @@ int sendsignalfn(const char *pidfn, int sig)
 
 	if (pid < 2) {
 		upslogx(LOG_NOTICE, "Ignoring invalid pid number %d", pid);
+		fclose(pidf);
 		return -1;
 	}
 
@@ -259,6 +261,7 @@ int sendsignalfn(const char *pidfn, int sig)
 
 	if (ret < 0) {
 		perror("kill");
+		fclose(pidf);
 		return -1;
 	}
 
@@ -267,9 +270,11 @@ int sendsignalfn(const char *pidfn, int sig)
 
 	if (ret < 0) {
 		perror("kill");
+		fclose(pidf);
 		return -1;
 	}
 
+	fclose(pidf);
 	return 0;
 }
 

conf/Makefile.in

@@ -47,6 +47,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ax_compare_version.m4 \
 	$(top_srcdir)/m4/lt~obsolete.m4 \
 	$(top_srcdir)/m4/nut_arg_with.m4 \
 	$(top_srcdir)/m4/nut_check_asciidoc.m4 \
+	$(top_srcdir)/m4/nut_check_libavahi.m4 \
+	$(top_srcdir)/m4/nut_check_libfreeipmi.m4 \
 	$(top_srcdir)/m4/nut_check_libgd.m4 \
 	$(top_srcdir)/m4/nut_check_libhal.m4 \
 	$(top_srcdir)/m4/nut_check_libneon.m4 \
@@ -140,10 +142,14 @@ INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 LD = @LD@
 LDFLAGS = @LDFLAGS@
+LIBAVAHI_CFLAGS = @LIBAVAHI_CFLAGS@
+LIBAVAHI_LIBS = @LIBAVAHI_LIBS@
 LIBGD_CFLAGS = @LIBGD_CFLAGS@
 LIBGD_LDFLAGS = @LIBGD_LDFLAGS@
 LIBHAL_CFLAGS = @LIBHAL_CFLAGS@
 LIBHAL_LIBS = @LIBHAL_LIBS@
+LIBIPMI_CFLAGS = @LIBIPMI_CFLAGS@
+LIBIPMI_LIBS = @LIBIPMI_LIBS@
 LIBNEON_CFLAGS = @LIBNEON_CFLAGS@
 LIBNEON_LIBS = @LIBNEON_LIBS@
 LIBNETSNMP_CFLAGS = @LIBNETSNMP_CFLAGS@
@@ -181,6 +187,10 @@ PACKAGE_TARNAME = @PACKAGE_TARNAME@
 PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PORT = @PORT@
 RANLIB = @RANLIB@
 RUN_AS_GROUP = @RUN_AS_GROUP@
 RUN_AS_USER = @RUN_AS_USER@
@@ -245,6 +255,8 @@ sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
 sysconfdir = @sysconfdir@
+systemdsystemshutdowndir = @systemdsystemshutdowndir@
+systemdsystemunitdir = @systemdsystemunitdir@
 target = @target@
 target_alias = @target_alias@
 target_cpu = @target_cpu@

configure.in

@@ -3,7 +3,7 @@ dnl | Network UPS Tools: configure.in                                  |
 dnl +------------------------------------------------------------------+
 
 dnl NUT version number is defined here and *only* here (no more include/version)
-AC_INIT(nut, 2.6.1)
+AC_INIT(nut, 2.6.2)
 AC_CONFIG_SRCDIR(server/upsd.c)
 AC_CONFIG_MACRO_DIR([m4])
 echo "Network UPS Tools version ${PACKAGE_VERSION}"
@@ -26,6 +26,8 @@ dnl Use "./configure --enable-maintainer-mode" to keep Makefile.in and Makefile
 dnl in sync after SVN updates.
 AM_MAINTAINER_MODE
 
+dnl PKG_PROG_PKG_CONFIG
+
 dnl # the following is commented out, because the UPS_VERSION macro now
 dnl # resides in include/nut_version.h, which is generated by Makefile.am,
 dnl # rather than in include/config.h, which is generated by configure.  The
@@ -110,7 +112,7 @@ fi
 
 case ${target_os} in
    hpux11* )
-      dnl It seems like the thread safe string functions won't be included
+      dnl It seems like the thread safe string functions will not be included
       dnl on 64 bit HP-UX unless we define _REENTRANT
       CFLAGS="${CFLAGS} -D_REENTRANT"
       ;;
@@ -126,6 +128,16 @@ AC_CHECK_DECLS(optind, [], [
 	], [AC_INCLUDES_DEFAULT])
 ], [AC_INCLUDES_DEFAULT])
 
+dnl do a 2nd check to ensure inclusion of getopt.h, in case optind is known
+AC_CHECK_HEADERS(getopt.h, [
+	AC_DEFINE(NEED_GETOPT_H, 1, [Define if getopt.h is needed])
+], [
+	AC_DEFINE(NEED_GETOPT_DECLS, 1, [Define to use explicit getopt declarations])
+], [AC_INCLUDES_DEFAULT])
+
+dnl also check for getopt_long
+AC_CHECK_FUNCS(getopt_long)
+
 dnl FreeBSD serial locking compatibility - look for uu_lock in libutil.h
 AC_CHECK_DECLS(uu_lock, [
 	AC_DEFINE(HAVE_UU_LOCK, 1, [Use uu_lock for locking (FreeBSD)])
@@ -154,6 +166,11 @@ AC_SEARCH_LIBS(connect, socket)
 AC_HEADER_TIME
 AC_CHECK_HEADERS(sys/modem.h stdarg.h varargs.h sys/termios.h sys/time.h, [], [], [AC_INCLUDES_DEFAULT])
 
+# pthread related checks
+AC_SEARCH_LIBS([pthread_create], [pthread],
+       [AC_DEFINE(HAVE_PTHREAD, 1, [Define to enable pthread support code])],
+       [])
+
 dnl ----------------------------------------------------------------------
 dnl Check for types and define possible replacements
 NUT_TYPE_SOCKLEN_T
@@ -163,7 +180,7 @@ dnl check for --with-all (or --without-all, or --with-all=auto) flag
 
 AC_MSG_CHECKING(for --with-all)
 AC_ARG_WITH(all,
-	AS_HELP_STRING([--with-all], [enable serial, usb, snmp, neon, powerman, cgi, dev]),
+	AS_HELP_STRING([--with-all], [enable serial, usb, snmp, neon, ipmi, powerman, cgi, dev, avahi]),
 [
 	if test -n "${withval}"; then
 		dnl Note: we allow "no" as a positive value, because
@@ -175,6 +192,8 @@ AC_ARG_WITH(all,
 		if test -z "${with_powerman}"; then with_powerman="${withval}"; fi
 		if test -z "${with_cgi}"; then with_cgi="${withval}"; fi
 		if test -z "${with_dev}"; then with_dev="${withval}"; fi
+		if test -z "${with_avahi}"; then with_avahi="${withval}"; fi
+		if test -z "${with_ipmi}"; then with_ipmi="${withval}"; fi
 		AC_MSG_RESULT("${withval}")
 	else
 		AC_MSG_RESULT(not given)
@@ -210,6 +229,7 @@ NUT_ARG_WITH([neon], [build and install neon based XML/HTTP driver], [auto])
 NUT_CHECK_LIBNEON
 NUT_ARG_WITH([powerman], [build and install Powerman PDU client driver], [auto])
 NUT_CHECK_LIBPOWERMAN
+NUT_CHECK_LIBAVAHI
 
 dnl ----------------------------------------------------------------------
 dnl additional USB-related checks
@@ -282,6 +302,26 @@ fi
 
 AM_CONDITIONAL(WITH_NEONXML, test "${nut_with_neon}" = "yes")
 NUT_REPORT_FEATURE([build neon based XML driver], [${nut_with_neon}])
+if test "${nut_with_neon}" = "yes"; then
+   AC_DEFINE_UNQUOTED(WITH_NEON, 1, [Define to enable Neon XML/HTTP support])
+fi
+
+dnl ----------------------------------------------------------------------
+dnl checks related to --with-avahi
+
+dnl ${nut_with_avahi}: any value except "yes" or "no" is treated as "auto".
+if test "${nut_with_avahi}" = "yes" -a "${nut_have_avahi}" != "yes"; then
+   AC_MSG_ERROR(["avahi libraries not found"])
+fi
+
+if test "${nut_with_avahi}" != "no"; then
+   nut_with_avahi="${nut_have_avahi}"
+fi
+
+AM_CONDITIONAL(WITH_AVAHI, test "${nut_with_avahi}" = "yes")
+if test "${nut_with_avahi}" = "yes"; then
+   AC_DEFINE_UNQUOTED(WITH_AVAHI, 1, [Define to enable avahi support])
+fi
 
 dnl ----------------------------------------------------------------------
 
@@ -299,6 +339,68 @@ fi
 AM_CONDITIONAL(WITH_LIBPOWERMAN, test "${nut_with_powerman}" = "yes")
 NUT_REPORT_FEATURE([build Powerman PDU client driver], [${nut_with_powerman}])
 
+dnl ----------------------------------------------------------------------
+dnl Check for with-ipmi, and --with-freeipmi (or --with-openipmi)
+dnl Only one can be enabled at a time, with a preference for FreeIPMI
+dnl if both are available (since it is the only one supported ATM!!)
+
+nut_ipmi_lib=""
+
+NUT_ARG_WITH([ipmi], [build and install IPMI PSU driver], [auto])
+NUT_ARG_WITH([freeipmi], [enable IPMI support using FreeIPMI], [auto])
+dnl NUT_ARG_WITH([openipmi], [enable IPMI support using OpenIPMI], [auto])
+
+dnl ${nut_with_ipmi}: any value except "yes" or "no" is treated as "auto". 
+if test "${nut_with_ipmi}" != "no"; then
+   dnl check if FreeIPMI (and maybe later OpenIPMI) was explicitly requested
+   if test "${nut_with_freeipmi}" = "yes"; then
+      NUT_CHECK_LIBFREEIPMI
+      if test "${nut_have_freeipmi}" != "yes"; then
+         AC_MSG_ERROR(["GNU FreeIPMI not found, required for IPMI support"])
+      fi
+      dnl Implies --with-ipmi
+      nut_with_ipmi="yes"
+   dnl elif test "${nut_with_openipmi}" = "yes"; then
+      dnl AC_MSG_ERROR(["OpenIPMI is not yet supported"])
+      dnl NUT_CHECK_LIBOPENIPMI
+      dnl if test "${nut_have_openipmi}" != "yes"; then
+      dnl    AC_MSG_ERROR(["OpenIPMI not found, required for IPMI support"])
+      dnl fi
+      dnl    Implies --with-ipmi
+      dnl    nut_with_ipmi="yes"
+   else
+      dnl Prefer FreeIPMI over OpenIPMI otherwise
+      NUT_CHECK_LIBFREEIPMI
+      if test "${nut_have_freeipmi}" != "yes"; then
+         if test "${nut_with_ipmi}" = "yes"; then
+            AC_MSG_ERROR(["FreeIPMI not found, required for IPMI support"])
+         fi
+         nut_with_ipmi="no"
+         dnl NUT_CHECK_OPENIPMI
+         dnl if test "${nut_have_openipmi}" != "yes"; then
+         dnl    if test "${nut_with_ipmi}" = "yes"; then
+         dnl       AC_MSG_ERROR(["GNU FreeIPMI and OpenIPMI neither found, required for IPMI support"])
+         dnl    fi
+         dnl    nut_with_ipmi="no"
+         dnl else
+         dnl    Implies --with-ipmi
+         dnl    nut_with_ipmi="yes"
+         dnl    nut_with_openipmi="yes"
+         dnl fi
+      else
+         dnl Implies --with-ipmi
+         nut_with_ipmi="yes"
+         nut_with_freeipmi="yes"
+      fi
+   fi
+fi
+
+AM_CONDITIONAL(WITH_IPMI, test "${nut_with_ipmi}" = "yes")
+AM_CONDITIONAL(WITH_FREEIPMI, test "${nut_with_freeipmi}" = "yes")
+dnl AM_CONDITIONAL(WITH_OPENIPMI, test "${nut_with_openipmi}" = "yes")
+
+NUT_REPORT_FEATURE([build IPMI driver], [${nut_with_ipmi} ${nut_ipmi_lib}])
+
 dnl ----------------------------------------------------------------------
 dnl Check for --with-ssl
 
@@ -550,7 +652,7 @@ AC_MSG_RESULT(${ALTPIDPATH})
 
 AC_MSG_CHECKING(driver path)
 AC_ARG_WITH(drvpath,
-	AS_HELP_STRING([--with-drvpath=PATH], [where to install ups drivers (EPREFIX/bin)]),
+	AS_HELP_STRING([--with-drvpath=PATH], [where to install UPS drivers (EPREFIX/bin)]),
 [
 	case "${withval}" in
 	yes|no)
@@ -709,7 +811,7 @@ AC_ARG_WITH(drivers,
 	AS_HELP_STRING([m4_version_prereq(2.62,
 		[@<:@--with-drivers=driver@<:@,driver@:>@@:>@],
 		[[[[--with-drivers=driver@<:@,driver@:>@]]]])],
-	[Only use specific drivers (all)]),
+	[Only build specific drivers (all)]),
 [
 	case "${withval}" in
 	yes|no)
@@ -783,6 +885,31 @@ else
 fi
 AM_CONDITIONAL(WITH_PKG_CONFIG, test -n "${pkgconfigdir}")
 
+PKG_PROG_PKG_CONFIG
+systemdsystemunitdir=`$PKG_CONFIG --variable=systemdsystemunitdir systemd`
+AC_MSG_CHECKING(whether to install systemd files)
+AC_ARG_WITH([systemdsystemunitdir],
+	AS_HELP_STRING([--with-systemdsystemunitdir=DIR], [Directory for systemd service files (auto)]),
+[
+	case "${withval}" in
+	yes|auto)
+		;;
+	no)
+		systemdsystemunitdir=""
+		;;
+	*)
+		systemdsystemunitdir="${withval}"
+		;;
+	esac
+], [])
+if test -n "${systemdsystemunitdir}"; then
+	systemdsystemshutdowndir="/lib/systemd/system-shutdown"
+	AC_MSG_RESULT(using ${systemdsystemunitdir})
+else
+	AC_MSG_RESULT(no)
+fi
+AM_CONDITIONAL(HAVE_SYSTEMD, test "$systemdsystemunitdir" != "")
+
 AC_MSG_CHECKING(whether to install hotplug rules)
 AC_ARG_WITH(hotplug-dir,
 	AS_HELP_STRING([--with-hotplug-dir=PATH], [where to install hotplug rules (/etc/hotplug)]),
@@ -875,8 +1002,12 @@ AC_SUBST(LIBUSB_CFLAGS)
 AC_SUBST(LIBUSB_LIBS)
 AC_SUBST(LIBNEON_CFLAGS)
 AC_SUBST(LIBNEON_LIBS)
+AC_SUBST(LIBAVAHI_CFLAGS)
+AC_SUBST(LIBAVAHI_LIBS)
 AC_SUBST(LIBPOWERMAN_CFLAGS)
 AC_SUBST(LIBPOWERMAN_LIBS)
+AC_SUBST(LIBIPMI_CFLAGS)
+AC_SUBST(LIBIPMI_LIBS)
 AC_SUBST(DOC_BUILD_LIST)
 AC_SUBST(LIBWRAP_CFLAGS)
 AC_SUBST(LIBWRAP_LIBS)
@@ -894,6 +1025,7 @@ AC_SUBST(SERLIBS)
 AC_SUBST(STATEPATH)
 AC_SUBST(CONFPATH)
 AC_SUBST(BINDIR)
+AC_SUBST(PORT)
 AC_SUBST(RUN_AS_USER)
 AC_SUBST(RUN_AS_GROUP)
 AC_SUBST(SUN_LIBUSB)
@@ -902,6 +1034,8 @@ AC_SUBST(cgiexecdir)
 AC_SUBST(driverexecdir)
 AC_SUBST(htmldir)
 AC_SUBST(pkgconfigdir)
+AC_SUBST(systemdsystemunitdir)
+AC_SUBST(systemdsystemshutdowndir)
 AC_SUBST(hotplugdir)
 AC_SUBST(udevdir)
 
@@ -931,16 +1065,21 @@ AC_OUTPUT([
  scripts/augeas/nutupsschedconf.aug
  scripts/augeas/nuthostsconf.aug
  scripts/augeas/nutupssetconf.aug
+ scripts/avahi/nut.service
  scripts/hal/Makefile
  scripts/hal/ups-nut-device.fdi
  scripts/hotplug/Makefile
  scripts/hotplug/libhidups
+ scripts/java/Makefile
  scripts/python/Makefile
+ scripts/systemd/Makefile
  scripts/udev/Makefile
+ scripts/udev/nut-ipmipsu.rules
  scripts/udev/nut-usbups.rules
  scripts/Makefile
  server/Makefile
  tools/Makefile
+ tools/nut-scanner/Makefile
  Makefile
 ])
 

data/Makefile.in

@@ -47,6 +47,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ax_compare_version.m4 \
 	$(top_srcdir)/m4/lt~obsolete.m4 \
 	$(top_srcdir)/m4/nut_arg_with.m4 \
 	$(top_srcdir)/m4/nut_check_asciidoc.m4 \
+	$(top_srcdir)/m4/nut_check_libavahi.m4 \
+	$(top_srcdir)/m4/nut_check_libfreeipmi.m4 \
 	$(top_srcdir)/m4/nut_check_libgd.m4 \
 	$(top_srcdir)/m4/nut_check_libhal.m4 \
 	$(top_srcdir)/m4/nut_check_libneon.m4 \
@@ -176,10 +178,14 @@ INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 LD = @LD@
 LDFLAGS = @LDFLAGS@
+LIBAVAHI_CFLAGS = @LIBAVAHI_CFLAGS@
+LIBAVAHI_LIBS = @LIBAVAHI_LIBS@
 LIBGD_CFLAGS = @LIBGD_CFLAGS@
 LIBGD_LDFLAGS = @LIBGD_LDFLAGS@
 LIBHAL_CFLAGS = @LIBHAL_CFLAGS@
 LIBHAL_LIBS = @LIBHAL_LIBS@
+LIBIPMI_CFLAGS = @LIBIPMI_CFLAGS@
+LIBIPMI_LIBS = @LIBIPMI_LIBS@
 LIBNEON_CFLAGS = @LIBNEON_CFLAGS@
 LIBNEON_LIBS = @LIBNEON_LIBS@
 LIBNETSNMP_CFLAGS = @LIBNETSNMP_CFLAGS@
@@ -217,6 +223,10 @@ PACKAGE_TARNAME = @PACKAGE_TARNAME@
 PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PORT = @PORT@
 RANLIB = @RANLIB@
 RUN_AS_GROUP = @RUN_AS_GROUP@
 RUN_AS_USER = @RUN_AS_USER@
@@ -281,6 +291,8 @@ sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
 sysconfdir = @sysconfdir@
+systemdsystemshutdowndir = @systemdsystemshutdowndir@
+systemdsystemunitdir = @systemdsystemunitdir@
 target = @target@
 target_alias = @target_alias@
 target_cpu = @target_cpu@

data/driver.list.in

@@ -62,6 +62,8 @@
 "APC"	"ups"	"1"	"Back-UPS"	"940-0023A cable"	"genericups upstype=9"
 "APC"	"ups"	"1"	"Back-UPS Office"	"940-0119A cable"	"genericups upstype=12"
 "APC"	"ups"	"1"	"Back-UPS RS 500"	"custom non-USB cable"	"genericups upstype=20"
+"APC"	"ups"	"3"	"Smart-UPS RT XL"	"AP9618 SNMP monitoring card"	"snmp-ups"
+"APC"	"ups"	"3"	"(various)"	"AP9618 SNMP monitoring card"	"snmp-ups"
 "APC"	"pdu"	"1"	"Masterswitch"	"940-0020 cable"	"genericups upstype=12"
 "APC"	"pdu"	"1"	"AP9210"	"8 outlets"	"powerman-pdu (experimental)"
 "APC"	"pdu"	"1"	"AP79xx"	"8 to 24 outlets"	"powerman-pdu (experimental)"
@@ -154,6 +156,7 @@
 "Cyber Power Systems"	"ups"	"2"	"Value 400E"	"USB"	"usbhid-ups"
 "Cyber Power Systems"	"ups"	"2"	"Value 600E"	"USB"	"usbhid-ups"
 "Cyber Power Systems"	"ups"	"2"	"Value 800E"	"USB"	"usbhid-ups"
+"Cyber Power Systems"	"ups"	"2"	"CP1000AVRLCD"	"USB"	"usbhid-ups"
 "Cyber Power Systems"	"ups"	"2"	"CP1350AVRLCD"	"USB"	"usbhid-ups"
 "Cyber Power Systems"	"ups"	"2"	"CP1500AVRLCD"	"USB"	"usbhid-ups"
 
@@ -196,6 +199,7 @@
 "Dynex"	"ups"	"1"	"975AVR"	""	"genericups upstype=7"
 "Dynex"	"ups"	"2"	"DX-800U"	"USB"	"usbhid-ups"
 
+"Eaton"	"ups"	"5"	"3S"	""	"usbhid-ups"
 "Eaton"	"ups"	"5"	"Protection Station 500/650/800 VA"	"USB"	"usbhid-ups"
 "Eaton"	"ups"	"5"	"Ellipse ECO 650/800/1200/1600 VA"	"USB"	"usbhid-ups"
 "Eaton"	"ups"	"5"	"Ellipse ASR USBS 600/750/1000/1500 VA"	"USB cable"	"usbhid-ups"
@@ -603,6 +607,7 @@
 "Opti-UPS"	"ups"	"1"	"PowerES"	"420E"	"optiups"
 
 "Orvaldi Power Protection"	"ups"	"2"	"various"	"not 400 or 600"	"blazer_ser"
+"Orvaldi Power Protection"	"ups"	"2"	"750 / 900SP"	""	"blazer_usb"
 
 "Phasak"	"ups"	"2"	"400VA / 600VA"	""	"blazer_ser"
 
@@ -627,6 +632,8 @@
 "Powercom"	"ups"	"4"	"(various)"	"USB (<= 2009 models, product id: 0002)"	"powercom (requires 'usbserial' kernel module)"
 "Powercom"	"ups"	"5"	"(various)"	"USB (2009 models, product id: 00a?)"	"usbhid-ups (experimental)"
 
+"POWEREX"	"ups"	"2"	"VI 1000 LED"	""	"blazer_usb"
+
 "PowerGuard"	"ups"	"2"	"PG-600"	""	"blazer_ser"
 
 "PowerKinetics"	"ups"	"1"	"9001"	""	"genericups upstype=17"
@@ -643,6 +650,7 @@
 "PowerWalker"	"ups"	"2"	"Line-Interactive VI 400/800"	""	"blazer_ser"
 "PowerWalker"	"ups"	"2"	"Line-Interactive VI 600"	""	"blazer_ser"
 "PowerWalker"	"ups"	"2"	"Line-Interactive VI 1400"	""	"blazer_usb"
+"PowerWalker"	"ups"	"2"	"Line-Interactive VI 850 LCD"	""	"blazer_usb"
 
 "Powerware"	"ups"	"4"	"3110"	""	"genericups upstype=7"
 "Powerware"	"ups"	"4"	"3115"	""	"genericups upstype=11"
@@ -707,6 +715,7 @@
 
 "SuperPower"	"ups"	"2"	"HP360, Hope-550"	""	"blazer_ser"
 
+"SVEN"	"ups"	"2"	"Power Pro+ series"	"USB"	"blazer_usb (USB ID ffff:0000)"
 "SVEN"	"ups"	"2"	"Power Pro+ series"	"USB"	"blazer_usb (USB ID 05b8:0000)"
 "SVEN"	"ups"	"1"	"Power Pro+ series"	"USB"	"richcomm_usb (USB ID 0925:1234)"
 "SVEN"	"ups"	"2"	"Power Smart RM 2000"	"USB"	"blazer_usb (USB ID 05b8:0000)"

data/html/Makefile.in

@@ -45,6 +45,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ax_compare_version.m4 \
 	$(top_srcdir)/m4/lt~obsolete.m4 \
 	$(top_srcdir)/m4/nut_arg_with.m4 \
 	$(top_srcdir)/m4/nut_check_asciidoc.m4 \
+	$(top_srcdir)/m4/nut_check_libavahi.m4 \
+	$(top_srcdir)/m4/nut_check_libfreeipmi.m4 \
 	$(top_srcdir)/m4/nut_check_libgd.m4 \
 	$(top_srcdir)/m4/nut_check_libhal.m4 \
 	$(top_srcdir)/m4/nut_check_libneon.m4 \
@@ -135,10 +137,14 @@ INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 LD = @LD@
 LDFLAGS = @LDFLAGS@
+LIBAVAHI_CFLAGS = @LIBAVAHI_CFLAGS@
+LIBAVAHI_LIBS = @LIBAVAHI_LIBS@
 LIBGD_CFLAGS = @LIBGD_CFLAGS@
 LIBGD_LDFLAGS = @LIBGD_LDFLAGS@
 LIBHAL_CFLAGS = @LIBHAL_CFLAGS@
 LIBHAL_LIBS = @LIBHAL_LIBS@
+LIBIPMI_CFLAGS = @LIBIPMI_CFLAGS@
+LIBIPMI_LIBS = @LIBIPMI_LIBS@
 LIBNEON_CFLAGS = @LIBNEON_CFLAGS@
 LIBNEON_LIBS = @LIBNEON_LIBS@
 LIBNETSNMP_CFLAGS = @LIBNETSNMP_CFLAGS@
@@ -176,6 +182,10 @@ PACKAGE_TARNAME = @PACKAGE_TARNAME@
 PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PORT = @PORT@
 RANLIB = @RANLIB@
 RUN_AS_GROUP = @RUN_AS_GROUP@
 RUN_AS_USER = @RUN_AS_USER@
@@ -240,6 +250,8 @@ sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
 sysconfdir = @sysconfdir@
+systemdsystemshutdowndir = @systemdsystemshutdowndir@
+systemdsystemunitdir = @systemdsystemunitdir@
 target = @target@
 target_alias = @target_alias@
 target_cpu = @target_cpu@

docs/FAQ.txt

@@ -518,9 +518,9 @@ usbhid-ups driver uses libusb (which is available for a wide range of
 operating systems) and libhid (currently, a modified internal version
 of it).
 
-As of NUT 2.2, usbhid-ups completely replaces the legacy hidups driver
+As of NUT 2.2, usbhid-ups completely replaces the legacy hidups driver,
-and provide support for various manufacturers. At that time, it will
+and provides support for various manufacturers. At that time, newhidups was
-be renamed to usbhid-ups.
+renamed to usbhid-ups.
 
 usbhid-ups is built automatically if possible (libusb development files
 need to be installed) and installed by the "make install" command.

docs/Makefile.in

@@ -43,6 +43,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ax_compare_version.m4 \
 	$(top_srcdir)/m4/lt~obsolete.m4 \
 	$(top_srcdir)/m4/nut_arg_with.m4 \
 	$(top_srcdir)/m4/nut_check_asciidoc.m4 \
+	$(top_srcdir)/m4/nut_check_libavahi.m4 \
+	$(top_srcdir)/m4/nut_check_libfreeipmi.m4 \
 	$(top_srcdir)/m4/nut_check_libgd.m4 \
 	$(top_srcdir)/m4/nut_check_libhal.m4 \
 	$(top_srcdir)/m4/nut_check_libneon.m4 \
@@ -149,10 +151,14 @@ INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 LD = @LD@
 LDFLAGS = @LDFLAGS@
+LIBAVAHI_CFLAGS = @LIBAVAHI_CFLAGS@
+LIBAVAHI_LIBS = @LIBAVAHI_LIBS@
 LIBGD_CFLAGS = @LIBGD_CFLAGS@
 LIBGD_LDFLAGS = @LIBGD_LDFLAGS@
 LIBHAL_CFLAGS = @LIBHAL_CFLAGS@
 LIBHAL_LIBS = @LIBHAL_LIBS@
+LIBIPMI_CFLAGS = @LIBIPMI_CFLAGS@
+LIBIPMI_LIBS = @LIBIPMI_LIBS@
 LIBNEON_CFLAGS = @LIBNEON_CFLAGS@
 LIBNEON_LIBS = @LIBNEON_LIBS@
 LIBNETSNMP_CFLAGS = @LIBNETSNMP_CFLAGS@
@@ -190,6 +196,10 @@ PACKAGE_TARNAME = @PACKAGE_TARNAME@
 PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PORT = @PORT@
 RANLIB = @RANLIB@
 RUN_AS_GROUP = @RUN_AS_GROUP@
 RUN_AS_USER = @RUN_AS_USER@
@@ -254,6 +264,8 @@ sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
 sysconfdir = @sysconfdir@
+systemdsystemshutdowndir = @systemdsystemshutdowndir@
+systemdsystemunitdir = @systemdsystemunitdir@
 target = @target@
 target_alias = @target_alias@
 target_cpu = @target_cpu@

docs/acknowledgements.txt

@@ -20,7 +20,6 @@ Active members
 ~~~~~~~~~~~~~~
 
 - Arnaud Quette: project leader (since 2005), Debian packager and jack of all trades
-- Arjen de Korte: senior lieutenant
 - Charles Lepple: senior lieutenant
 - Kjell Claesson: senior developer
 - Alexander Gordeev: junior developer
@@ -34,6 +33,7 @@ Retired members
 ~~~~~~~~~~~~~~~
 
 - Russell Kroll: Founder, and project leader from 1996 to 2005
+- Arjen de Korte: senior lieutenant
 - Peter Selinger: senior lieutenant
 - Carlos Rodrigues: author of the "megatec" drivers, removing the numerous
 drivers for Megatec / Q1 protocol. These drivers have now been replaced by
@@ -87,7 +87,7 @@ They also proposes NUT as an alternative to its software for
 link:http://www.microdowell.com/fra/download.html[Linux / Unix].
 
 - link:http://pcmups.com.tw[Powercom], through Alexey Morozov, has provided
-link:ups-protocol.html[extensive information] on its USB/HID devices, along
+link:ups-protocols.html[extensive information] on its USB/HID devices, along
 with development units.
 
 Appliances manufacturers

docs/config-notes.txt

@@ -339,7 +339,15 @@ Here are the steps that occur when a critical power event happens:
 
 1. The UPS goes on battery
 
-2. The UPS reaches low battery (a "critical" UPS)
+2. The UPS reaches low battery (a "critical" UPS), that is to say
+   upsc displays:
++
+   ups.status: OB LB
++
+The exact behavior depends on the specific device, and is related to:
+
+   - battery.charge and battery.charge.low
+   - battery.runtime and battery.runtime.low
 
 3. The upsmon master notices and sets "FSD" - the "forced shutdown"
    flag to tell all slave systems that it will soon power down the load.
@@ -566,9 +574,10 @@ Testing shutdowns
 ^^^^^^^^^^^^^^^^^
 
 UPS equipment varies from manufacturer to manufacturer and even within
-model lines.  You should test the shutdown sequence on your systems before
+model lines.  You should test the <<Shutdown_design,shutdown sequence>>
-leaving them unattended.  A successful sequence is one where the OS halts
+on your systems before leaving them unattended.  A successful sequence
-before the battery runs out, and the system restarts when power returns.
+is one where the OS halts before the battery runs out, and the system
+restarts when power returns.
 
 The first step is to see how upsdrvctl will behave without actually turning off
 power. To do so, use the '-t' argument:

docs/configure.txt

@@ -28,6 +28,22 @@ Note that you need to install libsnmp development package or files.
 Build and install the XML drivers (default: auto-detect)
 Note that you need to install neon development package or files.
 
+	--with-powerman
+
+Build and install Powerman PDU client driver (default: auto-detect)
+This allows to interact with the Powerman daemon, and the numerous
+Power Distribution Units (PDU) supported by the project.
+Note that you need to install powerman development package or files.
+
+	--with-ipmi
+	--with-freeipmi
+
+Build and install IPMI PSU driver (default: auto-detect)
+This allows to monitor numerous Power Supply Units (PSU) found
+on servers.
+Note that you need to install freeipmi (0.8.5 or higher) development package or
+files.
+
 	--with-drivers=<driver>,<driver>,...
 
 Specify exactly which driver or drivers to build and install (this
@@ -48,16 +64,6 @@ If you need to build more drivers later on, you will need to rerun
 configure with a different list. To make it build all of the
 drivers from scratch again, run 'make clean' before starting.
 
-	--with-doc=<output-format(s)>  (default: no)
-
-Build and install NUT documentation file(s).
-The possible values are "html-single" for single page HTML, "html-chunked"
-for multi pages HTML, "pdf" for a PDF file or "auto" to build all the
-possible previous documentation formats.
-Verbose output can be enabled using: ASCIIDOC_VERBOSE=-v make
-
-This feature requires AsciiDoc 8.6.3 (http://www.methods.co.nz/asciidoc).
-
 
 Optional features
 -----------------
@@ -69,6 +75,16 @@ CGI configuration files. This is not enabled by default, as they
 are only useful on web servers. See data/html/README for additional
 information on how to set up CGI programs.
 
+	--with-doc=<output-format(s)>  (default: no)
+
+Build and install NUT documentation file(s).
+The possible values are "html-single" for single page HTML, "html-chunked"
+for multi pages HTML, "pdf" for a PDF file or "auto" to build all the
+possible previous documentation formats.
+Verbose output can be enabled using: ASCIIDOC_VERBOSE=-v make
+
+This feature requires AsciiDoc 8.6.3 (http://www.methods.co.nz/asciidoc).
+
 	--with-lib (default: no)
 
 Build and install the upsclient library and header files. 
@@ -101,12 +117,6 @@ Gnome or KDE desktop, this will enable a full Plug & Play usage.
 See docs/nut-hal.txt for additional information on how to set up
 and use HAL support.
 
-	--with-powerman  (default: auto-detect)
-
-Build and install Powerman PDU client driver.
-This allows to interact with the Powerman daemon, and the numerous
-Power Distribution Units (PDU) supported by the project.
-
 
 Other configuration options
 ---------------------------

docs/download.txt

@@ -23,10 +23,10 @@ to do so.
 Stable tree: 2.6
 ~~~~~~~~~~~~~~~~
 
-- link:http://www.networkupstools.org/source/2.6/nut-2.6.1.tar.gz[nut-2.6.1.tar.gz]
+- link:http://www.networkupstools.org/source/2.6/nut-2.6.2.tar.gz[nut-2.6.2.tar.gz]
-- link:http://www.networkupstools.org/source/2.6/nut-2.6.1.tar.gz.sig[PGP/GPG signature]
+- link:http://www.networkupstools.org/source/2.6/nut-2.6.2.tar.gz.sig[PGP/GPG signature]
 - SHA-256 sum: 4ba1d297a98190db0ae86eb31136c780f35e6d3f47ae845316b44eaa9245a86e
-- link:http://www.networkupstools.org/source/2.6/new-2.6.1.txt[Release notes]
+- link:http://www.networkupstools.org/source/2.6/new-2.6.2.txt[Release notes]
 - link:http://www.networkupstools.org/source/2.6/ChangeLog[ChangeLog]
 
 You can also browse the link:http://www.networkupstools.org/source/2.6/[stable source directory].
@@ -101,7 +101,7 @@ link:http://packages.gentoo.org/package/sys-power/nut[Gentoo Linux],
 Mandriva,
 link:https://admin.fedoraproject.org/pkgdb/acls/name/nut[Red Hat / Fedora],
 link:http://software.opensuse.org/search[Novell Suse / openSUSE],
-link:https://forum.openwrt.org/viewtopic.php?id=26269[OpenWrt]
+link:https://forum.openwrt.org/viewtopic.php?id=26269[OpenWrt],
 link:http://packages.ubuntu.com/nut[Ubuntu].
 
 - BSD systems:
@@ -114,5 +114,11 @@ link:http://pdb.finkproject.org/pdb/package.php/nut[Fink],
 link:http://trac.macports.org/browser/trunk/dports/sysutils/nut/Portfile[MacPorts]
 
 - Windows (complete port, Beta):
-link:http://www.networkupstools.org/source/2.6/NUT-Installer-2.6.0-1.msi[Windows MSI installer 2.6.0-1]
+link:http://www.networkupstools.org/source/2.6/NUT-Installer-2.6.1-1.msi[Windows MSI installer 2.6.1-1]
 
+
+Java packages
+-------------
+
+- NUT Java support (client side, Beta)
+link:http://www.networkupstools.org/package/java/jNut-0.1-SNAPSHOT.tar.gz[jNUT 0.1-SNAPSHOT]

docs/man/Makefile.am

@@ -7,8 +7,9 @@
 #   during 'make dist'
 # - HTML files are built upon request, if AsciiDoc is available,
 # - groff update will only happen if AsciiDoc is available too,
-# - all this can probably (and hopefully) by improved, but I've not
+# - all this can probably (and hopefully) be improved, but I've not
-# found a way to do pattern replacement on the fly for target deps!
+#   found a way to do pattern replacement on the fly for target deps!
+#   FIXME: investigate an autogen.sh hook
 # - Ref: http://www.gnu.org/software/hello/manual/automake/Man-pages.html
 
 # Base configuration and client manpages, always installed
@@ -73,6 +74,13 @@ HTML_CLIENT_MANS = \
 	upsrw.html \
 	upssched.html
 
+SRC_TOOL_PAGES = nut-scanner.txt
+
+MAN_TOOL_PAGES = nut-scanner.8
+
+man8_MANS += $(MAN_TOOL_PAGES)
+
+HTML_TOOL_MANS = nut-scanner.html
 
 # CGI (--with-cgi) related manpages
 SRC_CGI_PAGES = \
@@ -124,6 +132,19 @@ SRC_DEV_PAGES = \
 	upscli_ssl.txt \
 	upscli_strerror.txt \
 	upscli_upserror.txt \
+	nutscan_scan_snmp.txt \
+	nutscan_scan_usb.txt \
+	nutscan_scan_xml_http.txt \
+	nutscan_scan_nut.txt \
+	nutscan_scan_avahi.txt \
+	nutscan_scan_ipmi.txt \
+	nutscan_display_ups_conf.txt \
+	nutscan_display_parsable.txt \
+	nutscan_cidr_to_ip.txt \
+	nutscan_new_device.txt \
+	nutscan_free_device.txt \
+	nutscan_add_option_to_device.txt \
+	nutscan_add_device_to_device.txt \
 	libupsclient-config.txt \
 	skel.txt
 
@@ -141,7 +162,20 @@ MAN3_DEV_PAGES = \
 	upscli_splitname.3 \
 	upscli_ssl.3 \
 	upscli_strerror.3 \
-	upscli_upserror.3
+	upscli_upserror.3 \
+	nutscan_scan_snmp.3 \
+	nutscan_scan_usb.3 \
+	nutscan_scan_xml_http.3 \
+	nutscan_scan_nut.3 \
+	nutscan_scan_avahi.3 \
+	nutscan_scan_ipmi.3 \
+	nutscan_display_ups_conf.3 \
+	nutscan_display_parsable.3 \
+	nutscan_cidr_to_ip.3 \
+	nutscan_new_device.3 \
+	nutscan_free_device.3 \
+	nutscan_add_option_to_device.3 \
+	nutscan_add_device_to_device.3
 
 MAN1_DEV_PAGES = \
 	libupsclient-config.1
@@ -170,6 +204,19 @@ HTML_DEV_MANS = \
 	upscli_ssl.html \
 	upscli_strerror.html \
 	upscli_upserror.html \
+	nutscan_scan_snmp.html \
+	nutscan_scan_usb.html \
+	nutscan_scan_xml_http.html \
+	nutscan_scan_nut.html \
+	nutscan_scan_avahi.html \
+	nutscan_scan_ipmi.html \
+	nutscan_display_ups_conf.html \
+	nutscan_display_parsable.html \
+	nutscan_cidr_to_ip.html \
+	nutscan_new_device.html \
+	nutscan_free_device.html \
+	nutscan_add_option_to_device.html \
+	nutscan_add_device_to_device.html \
 	libupsclient-config.html \
 	skel.html
 
@@ -185,6 +232,7 @@ else
 # (--with-serial)
 SRC_SERIAL_PAGES = \
 	apcsmart.txt	\
+	apcsmart-old.txt	\
 	bcmxcp.txt 	\
 	belkin.txt 	\
 	belkinunv.txt	\
@@ -222,6 +270,7 @@ SRC_SERIAL_PAGES = \
 
 MAN_SERIAL_PAGES = \
 	apcsmart.8	\
+	apcsmart-old.8	\
 	bcmxcp.8 	\
 	belkin.8 	\
 	belkinunv.8	\
@@ -263,6 +312,7 @@ endif
 
 HTML_SERIAL_MANS = \
 	apcsmart.html	\
+	apcsmart-old.html	\
 	bcmxcp.html 	\
 	belkin.html 	\
 	belkinunv.html	\
@@ -351,12 +401,23 @@ endif
 
 HTML_POWERMAN_MANS = powerman-pdu.html
 
+# (--with-ipmi)
+SRC_IPMIPSU_PAGES = nut-ipmipsu.txt
+MAN_IPMIPSU_PAGES = nut-ipmipsu.8
+
+if WITH_IPMI
+   man8_MANS += $(MAN_IPMIPSU_PAGES)
+endif
+
+HTML_IPMIPSU_MANS = nut-ipmipsu.html
+
 # SOME_DRIVERS
 endif
 
 MAN_MANS = \
 	$(MAN_CONF_PAGES) \
 	$(MAN_CLIENT_PAGES) \
+	$(MAN_TOOL_PAGES) \
 	$(MAN5_CGI_PAGES) \
 	$(MAN8_CGI_PAGES) \
 	$(MAN1_DEV_PAGES) \
@@ -365,13 +426,15 @@ MAN_MANS = \
 	$(MAN_SNMP_PAGES) \
 	$(MAN_USB_LIBUSB_PAGES) \
 	$(MAN_NETXML_PAGES) \
-	$(MAN_POWERMAN_PAGES)
+	$(MAN_POWERMAN_PAGES) \
+	$(MAN_IPMIPSU_PAGES)
 
 # distribute everything, even those not installed by default
 # Note that 'dist' target requires AsciiDoc!
 EXTRA_DIST = \
 	$(SRC_CONF_PAGES) \
 	$(SRC_CLIENT_PAGES) \
+	$(SRC_TOOL_PAGES) \
 	$(SRC_CGI_PAGES) \
 	$(SRC_DEV_PAGES) \
 	$(SRC_SERIAL_PAGES) \
@@ -379,19 +442,22 @@ EXTRA_DIST = \
 	$(SRC_USB_LIBUSB_PAGES) \
 	$(SRC_NETXML_PAGES) \
 	$(SRC_POWERMAN_PAGES) \
+	$(SRC_IPMIPSU_PAGES) \
 	$(MAN_MANS) \
 	asciidoc.conf
 
 HTML_MANS = \
 	$(HTML_CONF_MANS) \
 	$(HTML_CLIENT_MANS) \
+	$(HTML_TOOL_MANS) \
 	$(HTML_CGI_MANS) \
 	$(HTML_DEV_MANS) \
 	$(HTML_SERIAL_MANS) \
 	$(HTML_SNMP_MANS) \
 	$(HTML_USB_LIBUSB_MANS) \
 	$(HTML_NETXML_MANS) \
-	$(HTML_POWERMAN_MANS)
+	$(HTML_POWERMAN_MANS) \
+	$(HTML_IPMIPSU_MANS)
 
 all:
 

docs/man/Makefile.in

@@ -24,8 +24,9 @@
 #   during 'make dist'
 # - HTML files are built upon request, if AsciiDoc is available,
 # - groff update will only happen if AsciiDoc is available too,
-# - all this can probably (and hopefully) by improved, but I've not
+# - all this can probably (and hopefully) be improved, but I've not
-# found a way to do pattern replacement on the fly for target deps!
+#   found a way to do pattern replacement on the fly for target deps!
+#   FIXME: investigate an autogen.sh hook
 # - Ref: http://www.gnu.org/software/hello/manual/automake/Man-pages.html
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
@@ -59,6 +60,7 @@ target_triplet = @target@
 @SOME_DRIVERS_FALSE@@WITH_USB_TRUE@am__append_6 = $(MAN_USB_LIBUSB_PAGES)
 @SOME_DRIVERS_FALSE@@WITH_NEONXML_TRUE@am__append_7 = $(MAN_NETXML_PAGES)
 @SOME_DRIVERS_FALSE@@WITH_LIBPOWERMAN_TRUE@am__append_8 = $(MAN_POWERMAN_PAGES)
+@SOME_DRIVERS_FALSE@@WITH_IPMI_TRUE@am__append_9 = $(MAN_IPMIPSU_PAGES)
 subdir = docs/man
 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
@@ -68,6 +70,8 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/ax_compare_version.m4 \
 	$(top_srcdir)/m4/lt~obsolete.m4 \
 	$(top_srcdir)/m4/nut_arg_with.m4 \
 	$(top_srcdir)/m4/nut_check_asciidoc.m4 \
+	$(top_srcdir)/m4/nut_check_libavahi.m4 \
+	$(top_srcdir)/m4/nut_check_libfreeipmi.m4 \
 	$(top_srcdir)/m4/nut_check_libgd.m4 \
 	$(top_srcdir)/m4/nut_check_libhal.m4 \
 	$(top_srcdir)/m4/nut_check_libneon.m4 \
@@ -163,10 +167,14 @@ INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 LD = @LD@
 LDFLAGS = @LDFLAGS@
+LIBAVAHI_CFLAGS = @LIBAVAHI_CFLAGS@
+LIBAVAHI_LIBS = @LIBAVAHI_LIBS@
 LIBGD_CFLAGS = @LIBGD_CFLAGS@
 LIBGD_LDFLAGS = @LIBGD_LDFLAGS@
 LIBHAL_CFLAGS = @LIBHAL_CFLAGS@
 LIBHAL_LIBS = @LIBHAL_LIBS@
+LIBIPMI_CFLAGS = @LIBIPMI_CFLAGS@
+LIBIPMI_LIBS = @LIBIPMI_LIBS@
 LIBNEON_CFLAGS = @LIBNEON_CFLAGS@
 LIBNEON_LIBS = @LIBNEON_LIBS@
 LIBNETSNMP_CFLAGS = @LIBNETSNMP_CFLAGS@
@@ -204,6 +212,10 @@ PACKAGE_TARNAME = @PACKAGE_TARNAME@
 PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PORT = @PORT@
 RANLIB = @RANLIB@
 RUN_AS_GROUP = @RUN_AS_GROUP@
 RUN_AS_USER = @RUN_AS_USER@
@@ -268,6 +280,8 @@ sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
 sysconfdir = @sysconfdir@
+systemdsystemshutdowndir = @systemdsystemshutdowndir@
+systemdsystemunitdir = @systemdsystemunitdir@
 target = @target@
 target_alias = @target_alias@
 target_cpu = @target_cpu@
@@ -326,9 +340,10 @@ MAN_CLIENT_PAGES = \
 	upsrw.8 \
 	upssched.8
 
-man8_MANS = $(MAN_CLIENT_PAGES) $(am__append_2) $(am__append_3) \
+man8_MANS = $(MAN_CLIENT_PAGES) $(MAN_TOOL_PAGES) $(am__append_2) \
-	$(am__append_4) $(am__append_5) $(am__append_6) \
+	$(am__append_3) $(am__append_4) $(am__append_5) \
-	$(am__append_7) $(am__append_8)
+	$(am__append_6) $(am__append_7) $(am__append_8) \
+	$(am__append_9)
 HTML_CLIENT_MANS = \
 	nutupsdrv.html \
 	upsc.html \
@@ -340,6 +355,9 @@ HTML_CLIENT_MANS = \
 	upsrw.html \
 	upssched.html
 
+SRC_TOOL_PAGES = nut-scanner.txt
+MAN_TOOL_PAGES = nut-scanner.8
+HTML_TOOL_MANS = nut-scanner.html
 
 # CGI (--with-cgi) related manpages
 SRC_CGI_PAGES = \
@@ -385,6 +403,19 @@ SRC_DEV_PAGES = \
 	upscli_ssl.txt \
 	upscli_strerror.txt \
 	upscli_upserror.txt \
+	nutscan_scan_snmp.txt \
+	nutscan_scan_usb.txt \
+	nutscan_scan_xml_http.txt \
+	nutscan_scan_nut.txt \
+	nutscan_scan_avahi.txt \
+	nutscan_scan_ipmi.txt \
+	nutscan_display_ups_conf.txt \
+	nutscan_display_parsable.txt \
+	nutscan_cidr_to_ip.txt \
+	nutscan_new_device.txt \
+	nutscan_free_device.txt \
+	nutscan_add_option_to_device.txt \
+	nutscan_add_device_to_device.txt \
 	libupsclient-config.txt \
 	skel.txt
 
@@ -402,7 +433,20 @@ MAN3_DEV_PAGES = \
 	upscli_splitname.3 \
 	upscli_ssl.3 \
 	upscli_strerror.3 \
-	upscli_upserror.3
+	upscli_upserror.3 \
+	nutscan_scan_snmp.3 \
+	nutscan_scan_usb.3 \
+	nutscan_scan_xml_http.3 \
+	nutscan_scan_nut.3 \
+	nutscan_scan_avahi.3 \
+	nutscan_scan_ipmi.3 \
+	nutscan_display_ups_conf.3 \
+	nutscan_display_parsable.3 \
+	nutscan_cidr_to_ip.3 \
+	nutscan_new_device.3 \
+	nutscan_free_device.3 \
+	nutscan_add_option_to_device.3 \
+	nutscan_add_device_to_device.3
 
 MAN1_DEV_PAGES = \
 	libupsclient-config.1
@@ -425,6 +469,19 @@ HTML_DEV_MANS = \
 	upscli_ssl.html \
 	upscli_strerror.html \
 	upscli_upserror.html \
+	nutscan_scan_snmp.html \
+	nutscan_scan_usb.html \
+	nutscan_scan_xml_http.html \
+	nutscan_scan_nut.html \
+	nutscan_scan_avahi.html \
+	nutscan_scan_ipmi.html \
+	nutscan_display_ups_conf.html \
+	nutscan_display_parsable.html \
+	nutscan_cidr_to_ip.html \
+	nutscan_new_device.html \
+	nutscan_free_device.html \
+	nutscan_add_option_to_device.html \
+	nutscan_add_device_to_device.html \
 	libupsclient-config.html \
 	skel.html
 
@@ -432,6 +489,7 @@ HTML_DEV_MANS = \
 # (--with-serial)
 @SOME_DRIVERS_FALSE@SRC_SERIAL_PAGES = \
 @SOME_DRIVERS_FALSE@	apcsmart.txt	\
+@SOME_DRIVERS_FALSE@	apcsmart-old.txt	\
 @SOME_DRIVERS_FALSE@	bcmxcp.txt 	\
 @SOME_DRIVERS_FALSE@	belkin.txt 	\
 @SOME_DRIVERS_FALSE@	belkinunv.txt	\
@@ -469,6 +527,7 @@ HTML_DEV_MANS = \
 
 @SOME_DRIVERS_FALSE@MAN_SERIAL_PAGES = \
 @SOME_DRIVERS_FALSE@	apcsmart.8	\
+@SOME_DRIVERS_FALSE@	apcsmart-old.8	\
 @SOME_DRIVERS_FALSE@	bcmxcp.8 	\
 @SOME_DRIVERS_FALSE@	belkin.8 	\
 @SOME_DRIVERS_FALSE@	belkinunv.8	\
@@ -506,6 +565,7 @@ HTML_DEV_MANS = \
 
 @SOME_DRIVERS_FALSE@HTML_SERIAL_MANS = \
 @SOME_DRIVERS_FALSE@	apcsmart.html	\
+@SOME_DRIVERS_FALSE@	apcsmart-old.html	\
 @SOME_DRIVERS_FALSE@	bcmxcp.html 	\
 @SOME_DRIVERS_FALSE@	belkin.html 	\
 @SOME_DRIVERS_FALSE@	belkinunv.html	\
@@ -577,10 +637,16 @@ HTML_DEV_MANS = \
 @SOME_DRIVERS_FALSE@MAN_POWERMAN_PAGES = powerman-pdu.8
 @SOME_DRIVERS_FALSE@HTML_POWERMAN_MANS = powerman-pdu.html
 
+# (--with-ipmi)
+@SOME_DRIVERS_FALSE@SRC_IPMIPSU_PAGES = nut-ipmipsu.txt
+@SOME_DRIVERS_FALSE@MAN_IPMIPSU_PAGES = nut-ipmipsu.8
+@SOME_DRIVERS_FALSE@HTML_IPMIPSU_MANS = nut-ipmipsu.html
+
 # SOME_DRIVERS
 MAN_MANS = \
 	$(MAN_CONF_PAGES) \
 	$(MAN_CLIENT_PAGES) \
+	$(MAN_TOOL_PAGES) \
 	$(MAN5_CGI_PAGES) \
 	$(MAN8_CGI_PAGES) \
 	$(MAN1_DEV_PAGES) \
@@ -589,7 +655,8 @@ MAN_MANS = \
 	$(MAN_SNMP_PAGES) \
 	$(MAN_USB_LIBUSB_PAGES) \
 	$(MAN_NETXML_PAGES) \
-	$(MAN_POWERMAN_PAGES)
+	$(MAN_POWERMAN_PAGES) \
+	$(MAN_IPMIPSU_PAGES)
 
 
 # distribute everything, even those not installed by default
@@ -597,6 +664,7 @@ MAN_MANS = \
 EXTRA_DIST = \
 	$(SRC_CONF_PAGES) \
 	$(SRC_CLIENT_PAGES) \
+	$(SRC_TOOL_PAGES) \
 	$(SRC_CGI_PAGES) \
 	$(SRC_DEV_PAGES) \
 	$(SRC_SERIAL_PAGES) \
@@ -604,19 +672,22 @@ EXTRA_DIST = \
 	$(SRC_USB_LIBUSB_PAGES) \
 	$(SRC_NETXML_PAGES) \
 	$(SRC_POWERMAN_PAGES) \
+	$(SRC_IPMIPSU_PAGES) \
 	$(MAN_MANS) \
 	asciidoc.conf
 
 HTML_MANS = \
 	$(HTML_CONF_MANS) \
 	$(HTML_CLIENT_MANS) \
+	$(HTML_TOOL_MANS) \
 	$(HTML_CGI_MANS) \
 	$(HTML_DEV_MANS) \
 	$(HTML_SERIAL_MANS) \
 	$(HTML_SNMP_MANS) \
 	$(HTML_USB_LIBUSB_MANS) \
 	$(HTML_NETXML_MANS) \
-	$(HTML_POWERMAN_MANS)
+	$(HTML_POWERMAN_MANS) \
+	$(HTML_IPMIPSU_MANS)
 
 CLEANFILES = *.xml *.html
 SUFFIXES = .txt .html .1 .3 .5 .8

docs/man/apcsmart-old.8

@@ -0,0 +1,124 @@
+'\" t
+.\"     Title: apcsmart-old
+.\"    Author: [see the "AUTHOR" section]
+.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
+.\"      Date: 09/15/2011
+.\"    Manual: NUT Manual
+.\"    Source: Network UPS Tools
+.\"  Language: English
+.\"
+.TH "APCSMART\-OLD" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+apcsmart-old \- Driver for American Power Conversion Smart Protocol UPS equipment
+.SH "SYNOPSIS"
+.sp
+\fBapcsmart\-old\fR \-h
+.sp
+\fBapcsmart\-old\fR \-a \fIUPS_NAME\fR [\fIOPTIONS\fR]
+.if n \{\
+.sp
+.\}
+.RS 4
+.it 1 an-trap
+.nr an-no-space-flag 1
+.nr an-break-flag 1
+.br
+.ps +1
+\fBNote\fR
+.ps -1
+.br
+.sp
+This man page only documents the hardware\-specific features of the apcsmart\-old driver\&. For information about the core driver, see \fBnutupsdrv\fR(8)\&.
+.sp .5v
+.RE
+.SH "SUPPORTED HARDWARE"
+.sp
+apcsmart\-old should recognize all recent APC models that use a serial protocol at 2400 bps\&. This is primarily the Smart\-UPS, Matrix\-UPS and Back\-UPS Pro lines\&.
+.sp
+The driver attempts to support every bell and whistle of the APC reporting interface, whether or not this is strictly sensible\&.
+.sp
+Some older hardware may only report a handful of variables\&. This is usually not a bug\(emthey just don\(cqt support anything else\&.
+.SH "CABLING"
+.sp
+This driver expects to see a 940\-0024C cable or a clone by default\&. You can switch to the 940\-0095B dual\-mode cable support with the cable= definition described below\&.
+.sp
+If your 940\-0024C cable is broken or missing, use this diagram to build a clone:
+.sp
+http://www\&.networkupstools\&.org/cables/940\-0024C\&.jpg
+.SH "EXTRA ARGUMENTS"
+.sp
+This driver supports the following optional settings in the \fBups.conf\fR(5):
+.PP
+\fBcable=940\-0095B\fR
+.RS 4
+Configure the serial port for the APC 940\-0095B dual\-mode cable\&.
+.RE
+.PP
+\fBsdtype=\fR\fInum\fR
+.RS 4
+Use shutdown type
+\fInum\fR, according to this table:
+.PP
+0
+.RS 4
+soft shutdown or powerdown, depending on battery status
+.RE
+.PP
+1
+.RS 4
+soft shutdown followed by powerdown
+.RE
+.PP
+2
+.RS 4
+instant power off
+.RE
+.PP
+3
+.RS 4
+power off with grace period
+.RE
+.PP
+4
+.RS 4
+"force OB" hack method for CS 350
+.RE
+.RE
+.sp
+Modes 0 and 1 will power up the load when power returns\&. Modes 2 and 3 will keep the load turned off when the power returns\&.
+.sp
+Mode 4 exploits an oddity in the CS 350 models since they only seem to support the S command, but then only when running on battery\&. As a result, the driver will force the UPS to go on battery if necessary before sending the shutdown command\&. This ensures that the load gets reset\&.
+.SH "BUGS"
+.sp
+Some older APC UPS models return bogus data in the status register during a front panel test\&. This is usually detected and discarded, but some other unexpected values have occasionally slipped through\&.
+.sp
+APC UPS models with both USB and serial ports require a power cycle when switching from USB communication to serial, and perhaps vice versa\&.
+.SH "AUTHOR"
+.sp
+Nigel Metheringham <Nigel\&.Metheringham@Intechnology\&.co\&.uk> (drawing heavily on the original apcsmart driver by Russell Kroll)\&. This driver was called newapc for a time and was renamed in the 1\&.5 series\&. In 2\&.6\&.2 the driver was renamed to apcsmart\-old, being superseded by updated version with new features\&.
+.SH "SEE ALSO"
+.SS "The core driver:"
+.sp
+\fBnutupsdrv\fR(8)
+.SS "Internet resources:"
+.sp
+The NUT (Network UPS Tools) home page: http://www\&.networkupstools\&.org/

docs/man/apcsmart-old.txt

@@ -0,0 +1,103 @@
+APCSMART-OLD(8)
+===============
+
+NAME  
+----
+
+apcsmart-old - Driver for American Power Conversion Smart Protocol UPS equipment
+
+SYNOPSIS
+--------
+
+*apcsmart-old* -h
+
+*apcsmart-old* -a 'UPS_NAME' ['OPTIONS']
+
+NOTE: This man page only documents the hardware-specific features of the
+apcsmart-old driver.  For information about the core driver, see
+linkman:nutupsdrv[8].
+
+SUPPORTED HARDWARE
+------------------
+
+apcsmart-old should recognize all recent APC models that use a serial
+protocol at 2400 bps.  This is primarily the Smart-UPS, Matrix-UPS and
+Back-UPS Pro lines.
+
+The driver attempts to support every bell and whistle of the APC
+reporting interface, whether or not this is strictly sensible.
+
+Some older hardware may only report a handful of variables.  This is
+usually not a bug--they just don't support anything else.
+
+CABLING
+-------
+
+This driver expects to see a 940-0024C cable or a clone by default.  You
+can switch to the 940-0095B dual-mode cable support with the `cable=`
+definition described below.
+
+If your 940-0024C cable is broken or missing, use this diagram to build
+a clone:
+
+http://www.networkupstools.org/cables/940-0024C.jpg
+
+EXTRA ARGUMENTS
+---------------
+
+This driver supports the following optional settings in the
+linkman:ups.conf[5]:
+
+*cable=940-0095B*::
+Configure the serial port for the APC 940-0095B dual-mode cable.
+
+*sdtype=*'num'::
+Use shutdown type 'num', according to this table:
+
+0;; soft shutdown or powerdown, depending on battery status
+
+1;; soft shutdown followed by powerdown
+
+2;; instant power off
+
+3;; power off with grace period
+
+4;; "force OB" hack method for CS 350
+
+Modes 0 and 1 will power up the load when power returns.  Modes 2 and 3
+will keep the load turned off when the power returns.
+
+Mode 4 exploits an oddity in the CS 350 models since they only seem to
+support the S command, but then only when running on battery.  As a
+result, the driver will force the UPS to go on battery if necessary
+before sending the shutdown command.  This ensures that the load gets
+reset.
+
+BUGS
+----
+
+Some older APC UPS models return bogus data in the status register during
+a front panel test.  This is usually detected and discarded, but some
+other unexpected values have occasionally slipped through.
+
+APC UPS models with both USB and serial ports require a power cycle when
+switching from USB communication to serial, and perhaps vice versa.
+
+AUTHOR
+------
+Nigel Metheringham <Nigel.Metheringham@Intechnology.co.uk> (drawing
+heavily on the original apcsmart driver by Russell Kroll).  This driver
+was called newapc for a time and was renamed in the 1.5 series. In 2.6.2
+the driver was renamed to apcsmart-old, being superseded by updated version
+with new features.
+
+SEE ALSO
+--------
+
+The core driver:
+~~~~~~~~~~~~~~~~
+linkman:nutupsdrv[8]
+
+Internet resources:
+~~~~~~~~~~~~~~~~~~~
+The NUT (Network UPS Tools) home page: http://www.networkupstools.org/

docs/man/apcsmart.8

@@ -2,12 +2,12 @@
 .\"     Title: apcsmart
 .\"    Author: [see the "AUTHOR" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "APCSMART" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "APCSMART" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------
@@ -33,7 +33,7 @@ apcsmart \- Driver for American Power Conversion Smart Protocol UPS equipment
 .sp
 \fBapcsmart\fR \-h
 .sp
-\fBapcsmart\fR \-a \fIUPS_NAME\fR [\fIOPTIONS\fR]
+\fBapcsmart\fR \-a \*(AqUPS_NAME\*(Aq [\-x option=value \&...]
 .if n \{\
 .sp
 .\}
@@ -52,61 +52,446 @@ This man page only documents the hardware\-specific features of the apcsmart dri
 .RE
 .SH "SUPPORTED HARDWARE"
 .sp
-apcsmart should recognize all recent APC models that use a serial protocol at 2400 bps\&. This is primarily the Smart\-UPS, Matrix\-UPS and Back\-UPS Pro lines\&.
+The apcsmart driver should recognize (or at the very least work with) majority of Smart\-UPS models \- which includes Smart\-UPS, Matrix\-UPS and Back\-UPS lineups, among few other ones\&.
 .sp
-The driver attempts to support every bell and whistle of the APC reporting interface, whether or not this is strictly sensible\&.
+Currently we can roughly divide APC hardware into 3 groups (note that the division isn\*(Aqt strict by any means, and the borders between those are pretty fuzzy):
+.PP
+[very] "old" models
+.RS 4
+These models usually have old APC logo, white color and
+\fIno\fR
+programmable eeprom; You won\*(Aqt find them listed anywhere on APC\(cqs site either\&. The support for those will be usually based on driver\*(Aqs compatibility tables, or if the model (firmware) is not listed in those \- the driver will try to follow the very basic subset of features, while still trying to remain useful\&. Despite "smart" tagname, they often tend to behave in pretty dumb way (see the section below about shutdown behaviour)\&.
+.PP
+\fBExample models:\fR
 .sp
-Some older hardware may only report a handful of variables\&. This is usually not a bug\(emthey just don\(cqt support anything else\&.
+.RS 4
+.ie n \{\
+\h'-04'\(bu\h'+03'\c
+.\}
+.el \{\
+.sp -1
+.IP \(bu 2.3
+.\}
+Smart\-UPS 2000I
+.RE
+.sp
+.RS 4
+.ie n \{\
+\h'-04'\(bu\h'+03'\c
+.\}
+.el \{\
+.sp -1
+.IP \(bu 2.3
+.\}
+Smart\-UPS 900I
+.RE
+.RE
+.PP
+"new" models
+.RS 4
+These models usually come from late 1990s / pre\-2009 times\&. They are often referred as "3rd\&. gen"\&. For the most part, they have programmable eeprom, report supported commands and capabilites, and should work just fine with the apcsmart driver\&.
+.RE
+.PP
+"microlink" models
+.RS 4
+WARNING: these are not
+\fInatively\fR
+supported by apcsmart (or apcupsd for that matter, if you\(cqre wondering)\&. Around 2007 APC (now APC Schneider) decided to go back to its proprietry roots and all the new models (SMT, SMX, SURTD) use completely different protocol and cables\&. If you purchased a new APC ups, that uses cable with rj45 on the one end, and db\-9 on the other \- then you have such model\&. Your only option to support it through
+\fBNUT\fR
+is to purchase "legacy communications card" \- part #AP9620 (google \*(AqAP9620\*(Aq for more details)\&. Or if that\*(Aqs not an option, rely on official software\&.
+.RE
+.sp
+Another thing to remember is that Smart protocol is not USB protocol\&. If you have ups with both USB and serial ports, then depending on how you connect it, you will need either apcsmart or usbhid\-ups driver\&.
 .SH "CABLING"
 .sp
-This driver expects to see a 940\-0024C cable or a clone by default\&. You can switch to the 940\-0095B dual\-mode cable support with the cable= definition described below\&.
+This driver expects to see a 940\-0024C cable or a clone by default\&. You can switch to the 940\-0095B dual\-mode cable support with the \*(Aqcable=\*(Aq definition described below\&.
 .sp
 If your 940\-0024C cable is broken or missing, use this diagram to build a clone:
 .sp
 http://www\&.networkupstools\&.org/cables/940\-0024C\&.jpg
-.SH "EXTRA ARGUMENTS"
 .sp
-This driver supports the following optional settings in the \fBups.conf\fR(5):
+You can specify alternate cable in \fBups.conf\fR(5):
+.sp
+\fBcable\fR=940\-0095B
+.sp
+Alternatively, you can also provide it on the command line using:
+.sp
+\-x \fBcable\fR=940\-0095B
+.SH "EXPLANATION OF SHUTDOWN METHODS SUPPORTED BY APC UPSES"
+.sp
+APC hardware supports a lot of shutdown methods, that themselves can differ in behaviour quite a bit, depending on the model\&.
 .PP
-\fBcable=940\-0095B\fR
+\fBS\fR (soft hibernate)
 .RS 4
-Configure the serial port for the APC 940\-0095B dual\-mode cable\&.
+This is most basic command present in probably all APC models\&. It will hibernate the UPS, and subsequently wake it up when the mains supply returns\&.
+\fBThe command doesn\*(Aqt work if UPS is running on mains\&.\fR
+.PP
+"old" models
+.RS 4
+The behaviour here is unfortunately pretty primitive \- when the power returns, the ups just wakes up\&. No grace periods, no min\&. battery charge condition, etc\&. This is probably not what you want\&.
 .RE
 .PP
-\fBsdtype=\fR\fInum\fR
+"new" models
 .RS 4
-Use shutdown type
+The behaviour here is as expected \- the power is cut off after the eeprom defined grace period\&. The ups will wake up when the power returns, after the eeprom defined delay AND if the eeprom defined min\&. battery charge level is met\&. The delay is counted from the power\*(Aqs return\&.
-\fInum\fR, according to this table:
+.RE
+.RE
+.PP
+\fBCS\fR (aka "force OB hack")
+.RS 4
+This is a trick to make UPS power down even if it\*(Aqs running on mains\&. Immediately before issuing
+\fBS\fR, "simulate power failure" is issued\&. The remaining behaviour is as in
+\fBS\fR
+case\&.
+.sp
+The name came from APC CS models, where such trick was used to power down UPSes in consistent fashion using only
+\fBS\fR\&. It\*(Aqs better to use
+\fB@nnn\fR
+command if your UPS supports it (and is not too old, see below)\&.
+.RE
+.PP
+\fB@nnn\fR (hard hibernate)
+.RS 4
+This is basic command used to hibernate UPS regardless if it\*(Aqs running on batteries or on mains\&. The option takes 3 digits argument which can be used to specify additional wakeup delay (in 6 minute units)\&.
+.PP
+"old" models
+.RS 4
+The behaviour is \- unfortunately \- similary primitive to
+\fBS\fR\&. The ups unconditionally wakes up after nnn*6 minutes \-
+\fBit doesn\*(Aqt care if the power returned !\fR
+If nnn = 000, then UPS will do precisely nothing\&. On those models you\*(Aqre better specifying nnn > 0, if you can estimate the kind of power problems that might be happening in your environment\&. Another thing to consider with "old" models \- you might lose the connection with the ups, until it wakes up (with
+\fBS\fR, the serial connection is kept alive)\&.
+.RE
+.PP
+"new" models
+.RS 4
+All the usual variables defined in eeprom are respected (see
+\fBS\fR)\&. Additionally, if nnn > 0, the nnn*6 minutes are added to eeprom defined delay\&. UPS will not power up if it\*(Aqs running on batteries, contrary to what "old" models used to do \- the combined delay is counted from the moment of power return\&.
+.RE
+.sp
+Supposedly there exist models that take 2 digits instead of 3\&. Just in case, NUT also supports such variation\&. You have to provide exactly 2 digits to trigger it (\fBawd\fR
+option, or argument to one of the supported instant commands)\&.
+.RE
+.PP
+\fBK\fR (delayed poweroff)
+.RS 4
+This is permanent poweroff \- the ups will not wake up automatically\&. On newer units, it will respect applicable eeprom variables\&.
+.RE
+.PP
+\fBZ\fR (instant poweroff)
+.RS 4
+This is also permanent poweroff \- the ups will not wake up automatically\&. The poweroff is executed immediately\&.
+.RE
+.SH "SHUTDOWN CONTROL BY NUT"
+.sp
+There\*(Aqre 3 options used to control shutdown behaviour\&.
+.PP
+\fBsdtype\fR=[0\-5]
+.RS 4
+This option takes a single digit (0\-5) as an argument\&. See below for details\&.
+.RE
+.PP
+\fBadvorder\fR=no|[0\-4]+
+.RS 4
+This option takes string of digits as an argument\&. Methods listed are tried in turn until one of them succeedes\&. Note that the meaning of digits is different from
+\fBsdtype\fR\&. See below for details\&.
+.RE
+.PP
+\fBawd\fR=[0\-9]{1,3}
+.RS 4
+This option lets you specify additional wakeup delay used by
+\fB@\fR\&. If you provide exactly 2 digits, the driver will try 2 digits variation (see previous section for more info)\&. Otherwise standard 3 digits variation is used\&.
+\fBNote: the time unit is 6 minutes !\fR
+.RE
+.sp
+Keep in mind that \fBsdtype\fR and \fBadvorder\fR are mutually exclusive\&. If \fBadvorder\fR is provided, \fBsdtype\fR is ignored\&. If \fBadvorder\fR is set to \*(Aqno\*(Aq, \fBsdtype\fR is used instead\&.
+.sp
+If nothing is provided, \fBNUT\fR will assume \fBsdtype\fR=0 \- which is generally fine for anything not too ancient or not too quirky\&.
+.SS "SDTYPE"
+.sp
+The values permitted are from 0 to 5\&. Only one can be specified\&. Anything else will cause apcsmart to exit\&.
 .PP
 0
 .RS 4
-soft shutdown or powerdown, depending on battery status
+issue soft hibernate (\fBS\fR) if the ups is running on batteries, otherwise issue hard hibernate (\fB@\fR)
 .RE
 .PP
 1
 .RS 4
-soft shutdown followed by powerdown
+issue soft hibernate (\fBS\fR) (if on batteries), and if it fails (or on mains) \- try hard hibernate (\fB@\fR)
 .RE
 .PP
 2
 .RS 4
-instant power off
+issue instant poweroff (\fBZ\fR)
 .RE
 .PP
 3
 .RS 4
-power off with grace period
+issue delayed poweroff (\fBK\fR)
 .RE
 .PP
 4
 .RS 4
-"force OB" hack method for CS 350
+issue "force OB hack" (\fBCS\fR)
 .RE
+.PP
+5
+.RS 4
+issue hard hibernate (\fB@\fR)
+.RE
+.if n \{\
+.sp
+.\}
+.RS 4
+.it 1 an-trap
+.nr an-no-space-flag 1
+.nr an-break-flag 1
+.br
+.ps +1
+\fBNote\fR
+.ps -1
+.br
+.sp
+Hard hibernate\*(Aqs additional wakeup delay can be provided by \fBawd\fR\&.
+.sp .5v
+.RE
+.SS "ADVORDER"
+.sp
+The argument is either a word \*(Aqno\*(Aq, or a string of 1 \- 5 digits in [0 \- 4] range\&. Each digit maps to the one of shutdown methods supported by APC upses\&. Methods listed in this way are tried in order, until one of them succedes\&.
+.sp
+If \fBadvorder\fR is undefined or set to \*(Aqno\*(Aq, \fBsdtype\fR is used instead\&.
+.sp
+The mapping is as follows:
+.TS
+tab(:);
+lt lt
+lt lt
+lt lt
+lt lt
+lt lt.
+T{
+.sp
+0
+T}:T{
+.sp
+soft hibernate (\fBS\fR)
+T}
+T{
+.sp
+1
+T}:T{
+.sp
+hard hibernate (\fB@\fR)
+T}
+T{
+.sp
+2
+T}:T{
+.sp
+delayed poweroff (\fBK\fR)
+T}
+T{
+.sp
+3
+T}:T{
+.sp
+instant poweroff (\fBZ\fR)
+T}
+T{
+.sp
+4
+T}:T{
+.sp
+"force OB hack" (\fBCS\fR)
+T}
+.TE
+.sp 1
+.if n \{\
+.sp
+.\}
+.RS 4
+.it 1 an-trap
+.nr an-no-space-flag 1
+.nr an-break-flag 1
+.br
+.ps +1
+\fBNote\fR
+.ps -1
+.br
+.sp
+Hard hibernate\*(Aqs additional wakeup delay can be provided by \fBawd\fR\&.
+.sp .5v
+.RE
+.SH "IGNORING LB STATE"
+.sp
+APC units \- even if they report LB mode \- will not go into shutdown automatically\&. This gives us even more control with reference to "when to actually shutdown psu"\&. Since version 2\&.6\&.2, NUT supports \fBignorelb\fR option in driver\*(Aqs section of \fBups.conf\fR(5)\&. When such option is in effect, the core driver will ignore LB state as reported by specific driver and start shutdown basing the decision \fIonly\fR on two conditions:
+.sp
+battery\&.charge < battery\&.charge\&.low
+.sp
+\fBOR\fR
+.sp
+battery\&.runtime < battery\&.runtime\&.low
+.sp
+Of course \- if any of the variables are not available, the appropriate condition is not checked\&. If you want to explicitly disable one of the conditions, simply override the right hand variable causing the condition to always evaluate to false (you can even provide negative numbers)\&.
+.sp
+APC upses don\*(Aqt have battery\&.charge\&.low \- you will have to define it if you want to use such condition (prefix the variable with override\&. or default\&.)\&.
+.sp
+"New" units have battery\&.runtime\&.low, but depending on battery quality, firmware version, calibration and ups load \- this variable can be underestimated quite a bit \- especially right after going into OB state\&. This in turn can cause LB to be asserted, which under normal conditions will cause \fBNUT\fR to initiate the shutdown\&. You might want to disable this condition entirely, when relying on \fBignorelb\fR option (this was actually the main motivation behind introduction of such feature)\&.
+.sp
+Simple example:
+.sp
+.if n \{\
+.RS 4
+.\}
+.nf
+[apc]
+    ignorelb
+    override\&.battery\&.charge\&.low = 15
+    override\&.battery\&.runtime\&.low = \-1
+.fi
+.if n \{\
+.RE
+.\}
+.sp
+This would cause apcsmart to go into shutdown \fIonly\fR if detected battery charge < 15%\&. Runtime condition is always false in this example\&.
+.sp
+You could ask \- why bother ? Well, the reason is already hinted above\&. APC units can be very picky about the batteries, and their firmware can underestimate the remaining runtime (especially right after going into OB state)\&. \fBignorelb\fR option and \fBoverride\&.*\fR let you remain in control of the ups, not ups in control of you\&.
+.sp
+Furthermore, this allows to specify conditions similary to how it\(cqs done in apcupsd daemon, so it should be welcome by people used to that software\&.
+.SH "SUPPORTED INSTANT COMMANDS"
+.sp
+The apcsmart driver exposes following instant commands:
+.PP
+shutdown\&.return
+.RS 4
+executes soft hibernate
+.RE
+.PP
+shutdown\&.return cs
+.RS 4
+executes "force OB hack"
+.RE
+.PP
+shutdown\&.return at:<nbr>
+.RS 4
+executes "hard hibernate" with <nbr>*6 minutes additional wakeup delay (<nbr> format is the same as of
+\fBawd\fR
+option)
+.RE
+.PP
+shutdown\&.stayoff
+.RS 4
+executes "delayed poweroff"
+.RE
+.PP
+load\&.off
+.RS 4
+executes "instant poweroff"
 .RE
 .sp
-Modes 0 and 1 will power up the load when power returns\&. Modes 2 and 3 will keep the load turned off when the power returns\&.
+All the above commands must be issued 2nd time to have any effect (no less than 3 seconds, and no more than 15 seconds after the initial call)\&. Those commands are mostly useful for manual testing, when your machine is not powered by the ups you\*(Aqre testing\&.
 .sp
-Mode 4 exploits an oddity in the CS 350 models since they only seem to support the S command, but then only when running on battery\&. As a result, the driver will force the UPS to go on battery if necessary before sending the shutdown command\&. This ensures that the load gets reset\&.
+Other supported commands:
+.sp
+.RS 4
+.ie n \{\
+\h'-04'\(bu\h'+03'\c
+.\}
+.el \{\
+.sp -1
+.IP \(bu 2.3
+.\}
+load\&.on
+.RE
+.sp
+.RS 4
+.ie n \{\
+\h'-04'\(bu\h'+03'\c
+.\}
+.el \{\
+.sp -1
+.IP \(bu 2.3
+.\}
+test\&.panel\&.start
+.RE
+.sp
+.RS 4
+.ie n \{\
+\h'-04'\(bu\h'+03'\c
+.\}
+.el \{\
+.sp -1
+.IP \(bu 2.3
+.\}
+test\&.failure\&.start
+.RE
+.sp
+.RS 4
+.ie n \{\
+\h'-04'\(bu\h'+03'\c
+.\}
+.el \{\
+.sp -1
+.IP \(bu 2.3
+.\}
+test\&.battery\&.start
+.RE
+.sp
+.RS 4
+.ie n \{\
+\h'-04'\(bu\h'+03'\c
+.\}
+.el \{\
+.sp -1
+.IP \(bu 2.3
+.\}
+test\&.battery\&.stop
+.RE
+.sp
+.RS 4
+.ie n \{\
+\h'-04'\(bu\h'+03'\c
+.\}
+.el \{\
+.sp -1
+.IP \(bu 2.3
+.\}
+bypass\&.start
+.RE
+.sp
+.RS 4
+.ie n \{\
+\h'-04'\(bu\h'+03'\c
+.\}
+.el \{\
+.sp -1
+.IP \(bu 2.3
+.\}
+bypass\&.stop
+.RE
+.sp
+.RS 4
+.ie n \{\
+\h'-04'\(bu\h'+03'\c
+.\}
+.el \{\
+.sp -1
+.IP \(bu 2.3
+.\}
+calibrate\&.start
+.RE
+.sp
+.RS 4
+.ie n \{\
+\h'-04'\(bu\h'+03'\c
+.\}
+.el \{\
+.sp -1
+.IP \(bu 2.3
+.\}
+calibrate\&.stop
+.RE
 .SH "BUGS"
 .sp
 Some older APC UPS models return bogus data in the status register during a front panel test\&. This is usually detected and discarded, but some other unexpected values have occasionally slipped through\&.
@@ -114,11 +499,10 @@ Some older APC UPS models return bogus data in the status register during a fron
 APC UPS models with both USB and serial ports require a power cycle when switching from USB communication to serial, and perhaps vice versa\&.
 .SH "AUTHOR"
 .sp
-Nigel Metheringham <Nigel\&.Metheringham@Intechnology\&.co\&.uk> (drawing heavily on the original apcsmart driver by Russell Kroll)\&. This driver was called newapc for a time and was renamed in the 1\&.5 series\&.
+Nigel Metheringham <Nigel\&.Metheringham@Intechnology\&.co\&.uk> (drawing heavily on the original apcsmart driver by Russell Kroll)\&. This driver was called newapc for a time and was renamed in the 1\&.5 series\&. In 2\&.6\&.2 it was renamed to apcsmart\-old, being superseded by updated version with new features, which is maintained by Michal Soltys <soltys@ziu\&.info>
 .SH "SEE ALSO"
-.SS "The core driver:"
 .sp
-\fBnutupsdrv\fR(8)
+\fBnutupsdrv\fR(8), \fBups.conf\fR(5)
 .SS "Internet resources:"
 .sp
 The NUT (Network UPS Tools) home page: http://www\&.networkupstools\&.org/

docs/man/apcsmart.txt

@@ -11,30 +11,63 @@ SYNOPSIS
 
 *apcsmart* -h
 
-*apcsmart* -a 'UPS_NAME' ['OPTIONS']
+*apcsmart* -a \'UPS_NAME' [-x option=value ...]
 
 NOTE: This man page only documents the hardware-specific features of the
-apcsmart driver.  For information about the core driver, see  
+apcsmart driver. For information about the core driver, see
 linkman:nutupsdrv[8].
 
+
 SUPPORTED HARDWARE
 ------------------
 
-apcsmart should recognize all recent APC models that use a serial
+The apcsmart driver should recognize (or at the very least work with) majority
-protocol at 2400 bps.  This is primarily the Smart-UPS, Matrix-UPS and
+of Smart-UPS models - which includes Smart-UPS, Matrix-UPS and Back-UPS lineups,
-Back-UPS Pro lines.
+among few other ones.
 
-The driver attempts to support every bell and whistle of the APC
+Currently we can roughly divide APC hardware into 3 groups (note that the
-reporting interface, whether or not this is strictly sensible.
+division isn\'t strict by any means, and the borders between those are pretty fuzzy):
 
-Some older hardware may only report a handful of variables.  This is
+[very] "old" models::
-usually not a bug--they just don't support anything else.
+    These models usually have old APC logo, white color and _no_ programmable
+    eeprom; You won\'t find them listed anywhere on APC's site either. The support
+    for those will be usually based on driver\'s compatibility tables, or if the
+    model (firmware) is not listed in those - the driver will try to follow the very
+    basic subset of features, while still trying to remain useful. Despite
+    "smart" tagname, they often tend to behave in pretty dumb way (see the
+    section below about shutdown behaviour).
++
+--
+.Example models:
+    * Smart-UPS 2000I
+    * Smart-UPS 900I
+--
+
+"new" models::
+    These models usually come from late 1990s / pre-2009 times. They are often
+    referred as "3rd. gen". For the most part, they have programmable eeprom,
+    report supported commands and capabilites, and should work just fine with the
+    apcsmart driver.
+
+"microlink" models::
+    WARNING: these are not _natively_ supported by apcsmart (or apcupsd for that
+    matter, if you\'re wondering). Around 2007 APC (now APC Schneider) decided to
+    go back to its proprietry roots and all the new models (SMT, SMX, SURTD) use
+    completely different protocol and cables. If you purchased a new APC ups,
+    that uses cable with rj45 on the one end, and db-9 on the other - then you
+    have such model. Your only option to support it through *NUT* is to
+    purchase "legacy communications card" - part #AP9620 (google \'AP9620' for
+    more details). Or if that\'s not an option, rely on official software.
+
+Another thing to remember is that Smart protocol is not USB protocol. If you
+have ups with both USB and serial ports, then depending on how you connect it,
+you will need either apcsmart or usbhid-ups driver.
 
 CABLING
 -------
 
-This driver expects to see a 940-0024C cable or a clone by default.  You
+This driver expects to see a 940-0024C cable or a clone by default. You
-can switch to the 940-0095B dual-mode cable support with the `cable=`
+can switch to the 940-0095B dual-mode cable support with the \'cable='
 definition described below.
 
 If your 940-0024C cable is broken or missing, use this diagram to build
@@ -42,42 +75,246 @@ a clone:
 
 http://www.networkupstools.org/cables/940-0024C.jpg
 
-EXTRA ARGUMENTS
+You can specify alternate cable in linkman:ups.conf[5]:
----------------
 
-This driver supports the following optional settings in the
+*cable*=940-0095B
-linkman:ups.conf[5]:
 
-*cable=940-0095B*::
+Alternatively, you can also provide it on the command line using:
-Configure the serial port for the APC 940-0095B dual-mode cable.
 
-*sdtype=*'num'::
+-x *cable*=940-0095B
-Use shutdown type 'num', according to this table:
 
-0;; soft shutdown or powerdown, depending on battery status
+EXPLANATION OF SHUTDOWN METHODS SUPPORTED BY APC UPSES
+------------------------------------------------------
 
-1;; soft shutdown followed by powerdown
+APC hardware supports a lot of shutdown methods, that themselves can differ in
+behaviour quite a bit, depending on the model.
 
-2;; instant power off
+*S* (soft hibernate)::
+    This is most basic command present in probably all APC models. It will
+    hibernate the UPS, and subsequently wake it up when the mains supply
+    returns. *The command doesn\'t work if UPS is running on mains.*
 
-3;; power off with grace period
+    "old" models:::
+        The behaviour here is unfortunately pretty primitive - when the power
+        returns, the ups just wakes up. No grace periods, no min. battery
+        charge condition, etc. This is probably not what you want.
 
-4;; "force OB" hack method for CS 350
+    "new" models:::
+        The behaviour here is as expected - the power is cut off after the
+        eeprom defined grace period. The ups will wake up when the power
+        returns, after the eeprom defined delay AND if the eeprom defined min.
+        battery charge level is met. The delay is counted from the power\'s
+        return.
 
-Modes 0 and 1 will power up the load when power returns.  Modes 2 and 3
+*CS* (aka "force OB hack")::
-will keep the load turned off when the power returns.
+    This is a trick to make UPS power down even if it\'s running on mains.
+    Immediately before issuing *S*, "simulate power failure" is issued. The
+    remaining behaviour is as in *S* case.
++
+The name came from APC CS models, where such trick was used to power down
+UPSes in consistent fashion using only *S*. It\'s better to use *@nnn*
+command if your UPS supports it (and is not too old, see below).
 
-Mode 4 exploits an oddity in the CS 350 models since they only seem to
+*@nnn* (hard hibernate)::
-support the S command, but then only when running on battery.  As a
+    This is basic command used to hibernate UPS regardless if it\'s
-result, the driver will force the UPS to go on battery if necessary
+    running on batteries or on mains. The option takes 3 digits argument which
-before sending the shutdown command.  This ensures that the load gets
+    can be used to specify additional wakeup delay (in 6 minute units).
-reset.
++
+--
+    "old" models:::
+        The behaviour is - unfortunately - similary primitive to *S*. The ups
+        unconditionally wakes up after $$nnn*6$$ minutes - *it doesn\'t care if the
+        power returned !* If nnn = 000, then UPS will do precisely nothing. On
+        those models you\'re better specifying nnn > 0, if you can estimate
+        the kind of power problems that might be happening in your environment.
+        Another thing to consider with "old" models - you might lose the
+        connection with the ups, until it wakes up (with *S*, the serial
+        connection is kept alive).
+
+    "new" models:::
+        All the usual variables defined in eeprom are respected (see *S*).
+        Additionally, if nnn > 0, the $$nnn*6$$ minutes are added to eeprom
+        defined delay. UPS will not power up if it\'s running on batteries,
+        contrary to what "old" models used to do - the combined delay is counted
+        from the moment of power return.
+--
++
+Supposedly there exist models that take 2 digits instead of 3. Just in case,
+NUT also supports such variation. You have to provide exactly 2 digits to
+trigger it (*awd* option, or argument to one of the supported instant commands).
+
+*K* (delayed poweroff)::
+    This is permanent poweroff - the ups will not wake up automatically. On
+    newer units, it will respect applicable eeprom variables.
+
+*Z* (instant poweroff)::
+    This is also permanent poweroff - the ups will not wake up automatically. The
+    poweroff is executed immediately.
+
+SHUTDOWN CONTROL BY NUT
+-----------------------
+
+There\'re 3 options used to control shutdown behaviour.
+
+*sdtype*=[0-5]::
+    This option takes a single digit (0-5) as an argument. See below for
+    details.
+
+*advorder*=no|[0-4]+::
+    This option takes string of digits as an argument. Methods listed are tried
+    in turn until one of them succeedes. Note that the meaning of digits is
+    different from *sdtype*. See below for details.
+
+*awd*=[0-9]{1,3}::
+    This option lets you specify additional wakeup delay used by *@*. If you
+    provide exactly 2 digits, the driver will try 2 digits variation (see
+    previous section for more info). Otherwise standard 3 digits variation is
+    used. *Note: the time unit is 6 minutes !*
+
+Keep in mind that *sdtype* and *advorder* are mutually exclusive. If *advorder*
+is provided, *sdtype* is ignored. If *advorder* is set to \'no', *sdtype* is
+used instead.
+
+If nothing is provided, *NUT* will assume *sdtype*=0 - which is generally fine
+for anything not too ancient or not too quirky.
+
+SDTYPE
+~~~~~~
+
+The values permitted are from 0 to 5. Only one can be specified. Anything else
+will cause apcsmart to exit.
+
+0::
+issue soft hibernate (*S*) if the ups is running on batteries, otherwise issue
+hard hibernate (*@*)
+1::
+issue soft hibernate (*S*) (if on batteries), and if it fails (or on mains) -
+try hard hibernate (*@*)
+2::
+issue instant poweroff (*Z*)
+3::
+issue delayed poweroff (*K*)
+4::
+issue "force OB hack" (*CS*)
+5::
+issue hard hibernate (*@*)
+
+NOTE: Hard hibernate\'s additional wakeup delay can be provided by *awd*.
+
+ADVORDER
+~~~~~~~~
+
+The argument is either a word \'no', or a string of 1 - 5 digits in [0 - 4]
+range. Each digit maps to the one of shutdown methods supported by APC upses.
+Methods listed in this way are tried in order, until one of them succedes.
+
+If *advorder* is undefined or set to \'no', *sdtype* is used instead.
+
+The mapping is as follows:
+
+[horizontal]
+0:: soft hibernate (*S*)
+1:: hard hibernate (*@*)
+2:: delayed poweroff (*K*)
+3:: instant poweroff (*Z*)
+4:: "force OB hack" (*CS*)
+
+NOTE: Hard hibernate\'s additional wakeup delay can be provided by *awd*.
+
+IGNORING LB STATE
+-----------------
+
+APC units - even if they report LB mode - will not go into shutdown
+automatically. This gives us even more control with reference to "when to
+actually shutdown psu". Since version 2.6.2, NUT supports *ignorelb* option in
+driver\'s section of linkman:ups.conf[5]. When such option is in effect,
+the core driver will ignore LB state as reported by specific driver and 
+start shutdown basing the decision _only_ on two conditions:
+
+battery.charge < battery.charge.low
+
+*OR*
+
+battery.runtime < battery.runtime.low
+
+Of course - if any of the variables are not available, the appropriate condition
+is not checked. If you want to explicitly disable one of the conditions, simply
+override the right hand variable causing the condition to always evaluate to
+false (you can even provide negative numbers).
+
+APC upses don\'t have battery.charge.low - you will have to define it if you want
+to use such condition (prefix the variable with override. or default.).
+
+"New" units have battery.runtime.low, but depending on battery quality, firmware
+version, calibration and ups load - this variable can be underestimated quite a bit -
+especially right after going into OB state. This in turn can cause LB to be
+asserted, which under normal conditions will cause *NUT* to initiate the
+shutdown. You might want to disable this condition entirely, when relying on
+*ignorelb* option (this was actually the main motivation behind introduction of
+such feature).
+
+Simple example:
+
+[source,conf]
+----
+[apc]
+    ignorelb
+    override.battery.charge.low = 15
+    override.battery.runtime.low = -1
+----
+
+This would cause apcsmart to go into shutdown _only_ if detected battery charge
+< 15%. Runtime condition is always false in this example.
+
+You could ask - why bother ? Well, the reason is already hinted above. APC units
+can be very picky about the batteries, and their firmware can underestimate the
+remaining runtime (especially right after going into OB state). *ignorelb*
+option and *$$override.*$$* let you remain in control of the ups, not ups in control
+of you.
+
+Furthermore, this allows to specify conditions similary to how it's done in
+apcupsd daemon, so it should be welcome by people used to that software.
+
+
+SUPPORTED INSTANT COMMANDS
+--------------------------
+
+The apcsmart driver exposes following instant commands:
+
+shutdown.return::
+executes soft hibernate
+shutdown.return cs::
+executes "force OB hack"
+shutdown.return at:<nbr>::
+executes "hard hibernate" with $$<nbr>*6$$ minutes additional wakeup delay (<nbr> format
+is the same as of *awd* option)
+shutdown.stayoff::
+executes "delayed poweroff"
+load.off::
+executes "instant poweroff"
+
+All the above commands must be issued 2nd time to have any effect (no less than 3
+seconds, and no more than 15 seconds after the initial call). Those commands are
+mostly useful for manual testing, when your machine is not powered by the ups
+you\'re testing.
+
+Other supported commands:
+
+- load.on
+- test.panel.start
+- test.failure.start
+- test.battery.start
+- test.battery.stop
+- bypass.start
+- bypass.stop
+- calibrate.start
+- calibrate.stop
 
 BUGS
 ----
 
 Some older APC UPS models return bogus data in the status register during
-a front panel test.  This is usually detected and discarded, but some
+a front panel test. This is usually detected and discarded, but some
 other unexpected values have occasionally slipped through.
 
 APC UPS models with both USB and serial ports require a power cycle when
@@ -85,17 +322,20 @@ switching from USB communication to serial, and perhaps vice versa.
 
 AUTHOR
 ------
+
 Nigel Metheringham <Nigel.Metheringham@Intechnology.co.uk> (drawing
-heavily on the original apcsmart driver by Russell Kroll).  This driver
+heavily on the original apcsmart driver by Russell Kroll). This driver
-was called newapc for a time and was renamed in the 1.5 series.
+was called newapc for a time and was renamed in the 1.5 series. In 2.6.2
+it was renamed to apcsmart-old, being superseded by updated version with
+new features, which is maintained by Michal Soltys <soltys@ziu.info>
 
 SEE ALSO
 --------
 
-The core driver:
+linkman:nutupsdrv[8], linkman:ups.conf[5]
-~~~~~~~~~~~~~~~~
-linkman:nutupsdrv[8]
 
 Internet resources:
 ~~~~~~~~~~~~~~~~~~~
 The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
+
+// vim: tw=80 ai si ts=8 sts=4 sw=4 et :

docs/man/bcmxcp.8

@@ -2,12 +2,12 @@
 .\"     Title: bcmxcp
 .\"    Author: [see the "AUTHOR" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "BCMXCP" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "BCMXCP" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/bcmxcp_usb.8

@@ -2,12 +2,12 @@
 .\"     Title: bcmxcp_usb
 .\"    Author: [see the "AUTHOR" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "BCMXCP_USB" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "BCMXCP_USB" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/belkin.8

@@ -2,12 +2,12 @@
 .\"     Title: belkin
 .\"    Author: [FIXME: author] [see http://docbook.sf.net/el/author]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "BELKIN" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "BELKIN" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/belkinunv.8

@@ -2,12 +2,12 @@
 .\"     Title: belkinunv
 .\"    Author: [see the "AUTHOR" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "BELKINUNV" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "BELKINUNV" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/bestfcom.8

@@ -2,12 +2,12 @@
 .\"     Title: bestfcom
 .\"    Author: [see the "AUTHORS" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "BESTFCOM" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "BESTFCOM" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/bestfortress.8

@@ -2,12 +2,12 @@
 .\"     Title: bestfortress
 .\"    Author: [see the "AUTHOR" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "BESTFORTRESS" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "BESTFORTRESS" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/bestuferrups.8

@@ -2,12 +2,12 @@
 .\"     Title: bestuferrups
 .\"    Author: [see the "AUTHORS" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "BESTUFERRUPS" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "BESTUFERRUPS" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/bestups.8

@@ -2,12 +2,12 @@
 .\"     Title: bestups
 .\"    Author: [see the "AUTHOR" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "BESTUPS" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "BESTUPS" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/blazer.8

@@ -2,12 +2,12 @@
 .\"     Title: blazer
 .\"    Author: [see the "AUTHORS" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "BLAZER" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "BLAZER" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------
@@ -91,6 +91,16 @@ Some UPSes will lock up if you attempt to read rating information from them\&. S
 Some UPSes will lock up if you attempt to read vendor information from them\&. Setting this flag will make the driver skip this step\&.
 .RE
 .PP
+\fBprotocol =\fR \fIstring\fR
+.RS 4
+Skip autodetection of the protocol to use and only use the one specified\&. Supported values
+\fImegatec\fR,
+\fImegatec/old\fR,
+\fImustek\fR
+and
+\fIzinto\fR\&.
+.RE
+.PP
 \fBruntimecal =\fR \fIvalue,value,value,value\fR
 .RS 4
 Parameter used in the (optional) runtime estimation\&. This takes two runtimes at different loads\&. Typically, this uses the runtime at full load and the runtime at half load\&. For instance, if your UPS has a rated runtime of 240 seconds at full load and 720 seconds at half load, you would enter

docs/man/blazer.txt

@@ -78,6 +78,11 @@ Setting this flag will make the driver skip this step.
 Some UPSes will lock up if you attempt to read vendor information from them.
 Setting this flag will make the driver skip this step.
 
+*protocol =* 'string'::
+
+Skip autodetection of the protocol to use and only use the one specified.
+Supported values 'megatec', 'megatec/old', 'mustek' and 'zinto'.
+
 *runtimecal =* 'value,value,value,value'::
 
 Parameter used in the (optional) runtime estimation. This takes two runtimes

docs/man/clone.8

@@ -2,12 +2,12 @@
 .\"     Title: clone
 .\"    Author: [see the "AUTHOR" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "CLONE" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "CLONE" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/dummy-ups.8

@@ -2,12 +2,12 @@
 .\"     Title: dummy-ups
 .\"    Author: [see the "AUTHOR" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "DUMMY\-UPS" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "DUMMY\-UPS" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/etapro.8

@@ -2,12 +2,12 @@
 .\"     Title: etapro
 .\"    Author: [see the "AUTHOR" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "ETAPRO" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "ETAPRO" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/everups.8

@@ -2,12 +2,12 @@
 .\"     Title: everups
 .\"    Author: [see the "AUTHOR" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "EVERUPS" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "EVERUPS" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/gamatronic.8

@@ -2,12 +2,12 @@
 .\"     Title: gamatronic
 .\"    Author: [see the "AUTHOR" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "GAMATRONIC" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "GAMATRONIC" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/genericups.8

@@ -2,12 +2,12 @@
 .\"     Title: genericups
 .\"    Author: [FIXME: author] [see http://docbook.sf.net/el/author]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "GENERICUPS" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "GENERICUPS" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/hosts.conf.5

@@ -2,12 +2,12 @@
 .\"     Title: hosts.conf
 .\"    Author: [FIXME: author] [see http://docbook.sf.net/el/author]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "HOSTS\&.CONF" "5" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "HOSTS\&.CONF" "5" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/isbmex.8

@@ -2,12 +2,12 @@
 .\"     Title: isbmex
 .\"    Author: [see the "AUTHOR" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "ISBMEX" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "ISBMEX" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/ivtscd.8

@@ -2,12 +2,12 @@
 .\"     Title: ivtscd
 .\"    Author: [see the "AUTHOR" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "IVTSCD" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "IVTSCD" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/libupsclient-config.1

@@ -2,12 +2,12 @@
 .\"     Title: libupsclient-config
 .\"    Author: [see the "AUTHORS" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "LIBUPSCLIENT\-CONFIG" "1" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "LIBUPSCLIENT\-CONFIG" "1" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/liebert-esp2.8

@@ -2,12 +2,12 @@
 .\"     Title: liebert-esp2
 .\"    Author: [see the "AUTHOR" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "LIEBERT\-ESP2" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "LIEBERT\-ESP2" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/liebert.8

@@ -2,12 +2,12 @@
 .\"     Title: liebert
 .\"    Author: [FIXME: author] [see http://docbook.sf.net/el/author]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "LIEBERT" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "LIEBERT" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/masterguard.8

@@ -2,12 +2,12 @@
 .\"     Title: masterguard
 .\"    Author: [see the "AUTHOR" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "MASTERGUARD" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "MASTERGUARD" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/metasys.8

@@ -2,12 +2,12 @@
 .\"     Title: metasys
 .\"    Author: [see the "AUTHOR" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "METASYS" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "METASYS" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/mge-shut.8

@@ -2,12 +2,12 @@
 .\"     Title: mge-shut
 .\"    Author: [see the "AUTHOR" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "MGE\-SHUT" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "MGE\-SHUT" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/mge-utalk.8

@@ -2,12 +2,12 @@
 .\"     Title: mge-utalk
 .\"    Author: [see the "AUTHOR" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "MGE\-UTALK" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "MGE\-UTALK" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/microdowell.8

@@ -2,12 +2,12 @@
 .\"     Title: microdowell
 .\"    Author: [see the "AUTHOR" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "MICRODOWELL" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "MICRODOWELL" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/netxml-ups.8

@@ -2,12 +2,12 @@
 .\"     Title: netxml-ups
 .\"    Author: [see the "AUTHORS" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "NETXML\-UPS" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "NETXML\-UPS" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/nut-ipmipsu.8

@@ -0,0 +1,231 @@
+'\" t
+.\"     Title: nut-ipmipsu
+.\"    Author: [see the "AUTHOR" section]
+.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
+.\"      Date: 09/15/2011
+.\"    Manual: NUT Manual
+.\"    Source: Network UPS Tools
+.\"  Language: English
+.\"
+.TH "NUT\-IPMIPSU" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+nut-ipmipsu \- Driver for IPMI Power Supply Units (PSU)
+.SH "SYNOPSIS"
+.sp
+\fBnut\-ipmipsu\fR \-h
+.sp
+\fBnut\-ipmipsu\fR \-a \fIPSU_NAME\fR [\fIOPTIONS\fR]
+.if n \{\
+.sp
+.\}
+.RS 4
+.it 1 an-trap
+.nr an-no-space-flag 1
+.nr an-break-flag 1
+.br
+.ps +1
+\fBNote\fR
+.ps -1
+.br
+.sp
+This driver is experimental, and still a work\-in\-progress\&. Feedback is encouraged\&.
+.sp .5v
+.RE
+.if n \{\
+.sp
+.\}
+.RS 4
+.it 1 an-trap
+.nr an-no-space-flag 1
+.nr an-break-flag 1
+.br
+.ps +1
+\fBNote\fR
+.ps -1
+.br
+.sp
+This man page only documents the hardware\-specific features of the nut\-ipmipsu driver\&. For information about the core driver, see \fBnutupsdrv\fR(8)\&.
+.sp .5v
+.RE
+.SH "SUPPORTED HARDWARE"
+.sp
+This driver should support a wide range of PSUs through local IPMI interface\&.
+.sp
+nut\-ipmipsu currently use the GNU FreeIPMI project, for IPMI implementation\&.
+.SH "EXTRA ARGUMENTS"
+.sp
+This driver doesn\(cqt support any optional settings\&.
+.SH "INSTALLATION"
+.sp
+This driver is not built by default\&. You can build it by using "configure \-\-with\-ipmi=yes"\&.
+.sp
+You also need to give proper permissions on the local IPMI device file (/dev/ipmi0 for example) to allow the NUT user to access it\&.
+.sp
+An udev rules file (nut\-ipmipsu\&.rules) is provided and automatically installed on udev enabled system\&. This file is generally installed in /etc/udev/rules\&.d/ or /lib/udev/rules\&.d/ on newer systems, to address the permission settings problem\&. For more information, refer to nut/scripts/udev/README\&.
+.SH "INSTANT COMMANDS"
+.sp
+This driver doesn\(cqt support any instant commands\&.
+.SH "IMPLEMENTATION"
+.sp
+The "port" value is used to identify the PSU\&. For instance, to target FRU 0x2, use the following in \fBups\&.conf\fR:
+.sp
+.if n \{\
+.RS 4
+.\}
+.nf
+[pdu]
+        driver = nut\-ipmipsu
+        port = id2
+.fi
+.if n \{\
+.RE
+.\}
+.sp
+This driver will report various information related to a PSU, including:
+.sp
+.RS 4
+.ie n \{\
+\h'-04'\(bu\h'+03'\c
+.\}
+.el \{\
+.sp -1
+.IP \(bu 2.3
+.\}
+manufacturer, model, serial and part numbers,
+.RE
+.sp
+.RS 4
+.ie n \{\
+\h'-04'\(bu\h'+03'\c
+.\}
+.el \{\
+.sp -1
+.IP \(bu 2.3
+.\}
+nominal voltage and frequency,
+.RE
+.sp
+.RS 4
+.ie n \{\
+\h'-04'\(bu\h'+03'\c
+.\}
+.el \{\
+.sp -1
+.IP \(bu 2.3
+.\}
+actual current and voltage,
+.RE
+.sp
+.RS 4
+.ie n \{\
+\h'-04'\(bu\h'+03'\c
+.\}
+.el \{\
+.sp -1
+.IP \(bu 2.3
+.\}
+status of the PSU:
+.sp
+.RS 4
+.ie n \{\
+\h'-04'\(bu\h'+03'\c
+.\}
+.el \{\
+.sp -1
+.IP \(bu 2.3
+.\}
+
+\fIOL\fR
+means that the PSU is present and providing power,
+.RE
+.sp
+.RS 4
+.ie n \{\
+\h'-04'\(bu\h'+03'\c
+.\}
+.el \{\
+.sp -1
+.IP \(bu 2.3
+.\}
+
+\fIOB\fR
+means that the PSU is present but not providing power (power cable removed),
+.RE
+.sp
+.RS 4
+.ie n \{\
+\h'-04'\(bu\h'+03'\c
+.\}
+.el \{\
+.sp -1
+.IP \(bu 2.3
+.\}
+
+\fIstale\fR
+means that the PSU is not present (ie physically removed)\&.
+.RE
+.RE
+.sp
+Here is an example output for a Dell r610 server:
+.sp
+.if n \{\
+.RS 4
+.\}
+.nf
+device\&.mfr: DELL
+device\&.mfr\&.date: 01/05/11 \- 08:51:00
+device\&.model: PWR SPLY,717W,RDNT
+device\&.part: 0RN442A01
+device\&.serial: CN179721130031
+device\&.type: psu
+driver\&.name: nut\-ipmipsu
+driver\&.parameter\&.pollinterval: 2
+driver\&.parameter\&.port: id2
+driver\&.version: 2\&.6\&.1\-3139M
+driver\&.version\&.data: IPMI PSU driver
+driver\&.version\&.internal: 0\&.01
+input\&.current: 0\&.20
+input\&.frequency\&.high: 63
+input\&.frequency\&.low: 47
+input\&.voltage: 232\&.00
+input\&.voltage\&.maximum: 264
+input\&.voltage\&.minimum: 90
+ups\&.id: 2
+ups\&.realpower\&.nominal: 717
+ups\&.status: OL
+ups\&.voltage: 12
+.fi
+.if n \{\
+.RE
+.\}
+.SH "AUTHOR"
+.sp
+Arnaud Quette <arnaud\&.quette@free\&.fr>
+.SH "SEE ALSO"
+.SS "The core driver:"
+.sp
+\fBnutupsdrv\fR(8)
+.SS "Internet resources:"
+.sp
+The NUT (Network UPS Tools) home page: http://www\&.networkupstools\&.org/
+.sp
+GNU FreeIPMI home page: http://www\&.gnu\&.org/software/freeipmi/

docs/man/nut-ipmipsu.txt

@@ -0,0 +1,115 @@
+NUT-IPMIPSU(8) 
+==============
+
+NAME
+----
+
+nut-ipmipsu - Driver for IPMI Power Supply Units (PSU)
+
+SYNOPSIS
+--------
+
+*nut-ipmipsu* -h
+
+*nut-ipmipsu* -a 'PSU_NAME' ['OPTIONS']
+
+NOTE: This driver is experimental, and still a work-in-progress. Feedback is
+encouraged.
+
+NOTE: This man page only documents the hardware-specific features of the
+nut-ipmipsu driver.  For information about the core driver, see
+linkman:nutupsdrv[8].
+
+SUPPORTED HARDWARE
+------------------
+
+This driver should support a wide range of PSUs through local IPMI interface.
+
+nut-ipmipsu currently use the GNU FreeIPMI project, for IPMI implementation.
+
+
+EXTRA ARGUMENTS
+---------------
+
+This driver doesn't support any optional settings.
+
+INSTALLATION
+------------
+
+This driver is not built by default.  You can build it by using
+"configure --with-ipmi=yes".
+
+You also need to give proper permissions on the local IPMI device file
+(/dev/ipmi0 for example) to allow the NUT user to access it.
+
+An udev rules file (nut-ipmipsu.rules) is provided and automatically installed
+on udev enabled system. This file is generally installed in /etc/udev/rules.d/
+or /lib/udev/rules.d/ on newer systems, to address the permission settings
+problem. For more information, refer to nut/scripts/udev/README.
+
+INSTANT COMMANDS
+----------------
+
+This driver doesn't support any instant commands.
+
+IMPLEMENTATION
+--------------
+
+The "port" value is used to identify the PSU.  For instance, to target
+FRU 0x2, use the following in *ups.conf*:
+
+	[pdu]
+		driver = nut-ipmipsu
+		port = id2
+
+This driver will report various information related to a PSU, including:
+
+ - manufacturer, model, serial and part numbers,
+ - nominal voltage and frequency,
+ - actual current and voltage,
+ - status of the PSU:
+
+   * 'OL' means that the PSU is present and providing power,
+   * 'OB' means that the PSU is present but not providing power (power cable removed),
+   * 'stale' means that the PSU is not present (ie physically removed).
+
+Here is an example output for a Dell r610 server:
+
+	device.mfr: DELL
+	device.mfr.date: 01/05/11 - 08:51:00
+	device.model: PWR SPLY,717W,RDNT
+	device.part: 0RN442A01
+	device.serial: CN179721130031
+	device.type: psu
+	driver.name: nut-ipmipsu
+	driver.parameter.pollinterval: 2
+	driver.parameter.port: id2
+	driver.version: 2.6.1-3139M
+	driver.version.data: IPMI PSU driver
+	driver.version.internal: 0.01
+	input.current: 0.20
+	input.frequency.high: 63
+	input.frequency.low: 47
+	input.voltage: 232.00
+	input.voltage.maximum: 264
+	input.voltage.minimum: 90
+	ups.id: 2
+	ups.realpower.nominal: 717
+	ups.status: OL
+	ups.voltage: 12
+
+AUTHOR
+------
+Arnaud Quette <arnaud.quette@free.fr>
+
+SEE ALSO
+--------
+The core driver:
+~~~~~~~~~~~~~~~~
+linkman:nutupsdrv[8]
+
+Internet resources:
+~~~~~~~~~~~~~~~~~~~
+The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
+
+GNU FreeIPMI home page: http://www.gnu.org/software/freeipmi/

docs/man/nut-scanner.8

@@ -0,0 +1,186 @@
+'\" t
+.\"     Title: nut-scanner
+.\"    Author: [FIXME: author] [see http://docbook.sf.net/el/author]
+.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
+.\"      Date: 09/15/2011
+.\"    Manual: NUT Manual
+.\"    Source: Network UPS Tools
+.\"  Language: English
+.\"
+.TH "NUT\-SCANNER" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+nut-scanner \- scan communication buses for NUT devices
+.SH "SYNOPSIS"
+.sp
+\fBnut\-scanner\fR \-h
+.sp
+\fBnut\-scanner\fR [\fIOPTIONS\fR]
+.SH "DESCRIPTION"
+.sp
+\fBnut\-scanner\fR scans available communication buses and display any NUT compatible device it has found\&.
+.SH "OPTIONS"
+.PP
+\fB\-h\fR
+.RS 4
+Display the help text\&.
+.RE
+.SH "DISPLAY OPTIONS"
+.PP
+\fB\-N\fR | \fB\-\-disp_nut_conf\fR
+.RS 4
+Display result in the
+\fIups\&.conf\fR
+format\&.
+.RE
+.PP
+\fB\-P\fR | \fB\-\-disp_parsable\fR
+.RS 4
+Display result in a parsable format\&.
+.RE
+.SH "BUS OPTIONS"
+.PP
+\fB\-C\fR | \fB\-\-complete_scan\fR
+.RS 4
+Scan all available communication buses (default behavior)
+.RE
+.PP
+\fB\-U\fR | \fB\-\-usb_scan\fR
+.RS 4
+List all NUT compatible USB devices currently plugged in\&.
+.RE
+.PP
+\fB\-S\fR | \fB\-\-snmp_scan\fR
+.RS 4
+Scan SNMP devices\&. Require at least a
+\fIstart IP\fR, and optionnaly an
+\fIend IP\fR\&. See specific SNMP OPTIONS for community and security settings\&.
+.RE
+.PP
+\fB\-M\fR | \fB\-\-xml_scan\fR
+.RS 4
+Scan XML/HTTP devices\&. Broadcast a network message on the current network interfaces to retrieve XML/HTTP capable devices\&. No IP required\&.
+.RE
+.PP
+\fB\-O\fR | \fB\-\-oldnut_scan\fR
+.RS 4
+Scan NUT devices (i\&.e\&. upsd daemon) on IP ranging from
+\fIstart IP\fR
+to
+\fIend IP\fR\&.
+.RE
+.PP
+\fB\-A\fR | \fB\-\-avahi_scan\fR
+.RS 4
+Scan NUT servers using avahi request on the current network interfaces\&. No IP required\&.
+.RE
+.PP
+\fB\-I\fR | \fB\-\-ipmi_scan\fR
+.RS 4
+Scan NUT compatible devices available via IPMI on the current host\&.
+.RE
+.SH "NETWORK OPTIONS"
+.PP
+\fB\-t\fR | \fB\-\-timeout\fR \fItimeout\fR
+.RS 4
+Set the network timeout in seconds\&. Default timeout is 5 seconds\&.
+.RE
+.PP
+\fB\-s\fR | \fB\-\-start_ip\fR \fIstart IP\fR
+.RS 4
+Set the first IP (IPv4 or IPv6) when a range of IP is required (SNMP, old_nut)\&.
+.RE
+.PP
+\fB\-e\fR | \fB\-\-end_ip\fR \fIend IP\fR
+.RS 4
+Set the last IP (IPv4 or IPv6) when a range of IP is required (SNMP, old_nut)\&. If this parameter is omitted, only the
+\fIstart IP\fR
+is scanned\&. If
+\fIend IP\fR
+is lesser than
+\fIstart IP\fR, both parameter are internally permuted\&.
+.RE
+.SH "NUT DEVICE OPTION"
+.PP
+\fB\-p\fR | \fB\-\-port <port number\fR \fIport number\fR
+.RS 4
+Set the port number of scanned NUT devices (default 3493)\&.
+.RE
+.SH "SNMP V1 OPTION"
+.PP
+\fB\-c\fR | \fB\-\-community\fR \fIcommunity\fR
+.RS 4
+Set SNMP v1 community name (default = public)\&.
+.RE
+.SH "SNMP V3 OPTIONS"
+.PP
+\fB\-l\fR | \fB\-\-secLevel\fR \fIsecurity level\fR
+.RS 4
+Set the
+\fIsecurity level\fR
+used for SNMPv3 messages\&. Allowed values are: noAuthNoPriv, authNoPriv and authPriv\&.
+.RE
+.PP
+\fB\-u\fR | \fB\-\-secName\fR \fIsecurity name\fR
+.RS 4
+Set the
+\fIsecurity name\fR
+used for authenticated SNMPv3 messages\&. This parameter is mandatory if you set
+\fIsecurity level\fR\&.
+.RE
+.PP
+\fB\-a\fR | \fB\-\-authProtocol\fR \fIauthentication protocol\fR
+.RS 4
+Set the
+\fIauthentication protocol\fR
+used for authenticated SNMPv3 messages\&. Allowed values are MD5 or SHA\&. Default value is MD5\&.
+.RE
+.PP
+\fB\-A\fR | \fB\-\-authPassword\fR \fIauthentication pass phrase\fR
+.RS 4
+Set the
+\fIauthentication pass phrase\fR
+used for authenticated SNMPv3 messages\&. This parameter is mandatory if you set
+\fIsecurity level\fR
+to authNoPriv or authPriv\&.
+.RE
+.PP
+\fB\-x\fR | \fB\-\-privProtocol\fR \fIprivacy protocol\fR
+.RS 4
+Set the
+\fIprivacy protocol\fR
+used for encrypted SNMPv3 messages\&. Allowed values are DES or AES\&. Default value is DES\&.
+.RE
+.PP
+\fB\-X\fR | \fB\-\-privPassword\fR \fIprivacy pass phrase\fR
+.RS 4
+Set the
+\fIprivacy pass phrase\fR
+used for encrypted SNMPv3 messages\&. This parameter is mandatory if you set
+\fIsecurity level\fR
+to authPriv\&.
+.RE
+.SH "SEE ALSO"
+.sp
+\fBups.conf\fR(5)
+.SH "INTERNET RESOURCES"
+.sp
+The NUT (Network UPS Tools) home page: http://www\&.networkupstools\&.org/

docs/man/nut-scanner.txt

@@ -0,0 +1,131 @@
+NUT-SCANNER(8)
+==============
+
+
+NAME
+----
+nut-scanner - scan communication buses for NUT devices
+
+SYNOPSIS
+--------
+*nut-scanner* -h
+
+*nut-scanner* ['OPTIONS']
+
+DESCRIPTION
+-----------
+
+*nut-scanner* scans available communication buses and display any NUT compatible device it has found.
+
+OPTIONS
+-------
+*-h*::
+Display the help text.
+
+DISPLAY OPTIONS
+---------------
+
+*-N* | *--disp_nut_conf*::
+
+  Display result in the 'ups.conf' format.
+
+*-P* | *--disp_parsable*::
+
+  Display result in a parsable format.
+
+BUS OPTIONS
+-----------
+
+*-C* | *--complete_scan*::
+
+  Scan all available communication buses (default behavior)
+
+*-U* | *--usb_scan*::
+
+  List all NUT compatible USB devices currently plugged in.
+
+*-S* | *--snmp_scan*::
+
+  Scan SNMP devices. Require at least a 'start IP', and optionnaly an 'end IP'. See specific SNMP OPTIONS for community and security settings.
+
+*-M* | *--xml_scan*::
+
+  Scan XML/HTTP devices. Broadcast a network message on the current network interfaces to retrieve XML/HTTP capable devices. No IP required. 
+
+*-O* | *--oldnut_scan*::
+
+  Scan NUT devices (i.e. upsd daemon) on IP ranging from 'start IP' to 'end IP'.
+
+*-A* | *--avahi_scan*::
+
+  Scan NUT servers using avahi request on the current network interfaces. No IP required.
+
+*-I* | *--ipmi_scan*::
+
+  Scan NUT compatible devices available via IPMI on the current host.
+
+NETWORK OPTIONS
+---------------
+
+*-t* | *--timeout* 'timeout'::
+
+  Set the network timeout in seconds. Default timeout is 5 seconds.
+
+*-s* | *--start_ip* 'start IP'::
+
+  Set the first IP (IPv4 or IPv6) when a range of IP is required (SNMP, old_nut).
+
+*-e* | *--end_ip* 'end IP'::
+
+  Set the last IP (IPv4 or IPv6) when a range of IP is required (SNMP, old_nut). If this parameter is omitted, only the 'start IP' is scanned. If 'end IP' is lesser than 'start IP', both parameter are internally permuted.
+
+NUT DEVICE OPTION
+-----------------
+
+*-p* | *--port <port number* 'port number'::
+
+  Set the port number of scanned NUT devices (default 3493).
+
+SNMP V1 OPTION
+--------------
+
+*-c* | *--community* 'community'::
+
+  Set SNMP v1 community name (default = public).
+
+SNMP V3 OPTIONS
+---------------
+
+*-l* | *--secLevel* 'security level'::
+
+  Set the 'security level' used for SNMPv3 messages. Allowed values are: noAuthNoPriv, authNoPriv and authPriv.
+
+*-u* | *--secName* 'security name'::
+
+  Set the 'security name' used for authenticated SNMPv3 messages. This parameter is mandatory if you set 'security level'.
+
+*-a* | *--authProtocol* 'authentication protocol'::
+
+  Set the 'authentication protocol' used for authenticated SNMPv3 messages. Allowed values are MD5 or SHA. Default value is MD5.
+
+*-A* | *--authPassword* 'authentication pass phrase'::
+
+  Set the 'authentication pass phrase' used for authenticated SNMPv3 messages. This parameter is mandatory if you set 'security level' to authNoPriv or authPriv.
+
+*-x* | *--privProtocol* 'privacy protocol'::
+
+  Set the 'privacy protocol' used for encrypted SNMPv3 messages. Allowed values are DES or AES. Default value is DES.
+
+*-X* | *--privPassword* 'privacy pass phrase'::
+
+  Set the 'privacy pass phrase' used for encrypted SNMPv3 messages. This parameter is mandatory if you set 'security level' to authPriv.
+
+SEE ALSO
+--------
+
+linkman:ups.conf[5]
+
+INTERNET RESOURCES
+------------------
+
+The NUT (Network UPS Tools) home page: http://www.networkupstools.org/

docs/man/nut.conf.5

@@ -2,12 +2,12 @@
 .\"     Title: nut.conf
 .\"    Author: [FIXME: author] [see http://docbook.sf.net/el/author]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "NUT\&.CONF" "5" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "NUT\&.CONF" "5" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/nutscan_add_device_to_device.3

@@ -0,0 +1,68 @@
+'\" t
+.\"     Title: nutscan_add_device_to_device
+.\"    Author: [FIXME: author] [see http://docbook.sf.net/el/author]
+.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
+.\"      Date: 09/15/2011
+.\"    Manual: NUT Manual
+.\"    Source: Network UPS Tools
+.\"  Language: English
+.\"
+.TH "NUTSCAN_ADD_DEVICE_T" "3" "09/15/2011" "Network UPS Tools" "NUT Manual"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+nutscan_add_device_to_device \- Concatenate two devices structure\&.
+.SH "SYNOPSIS"
+.sp
+.nf
+#include <nut\-scan\&.h>
+.fi
+.sp
+.nf
+nutscan_device_t * nutscan_add_device_to_device(nutscan_device_t * first, nutscan_device_t * second);
+.fi
+.SH "DESCRIPTION"
+.sp
+The nutscan_device_t contains the following variables:
+.sp
+.if n \{\
+.RS 4
+.\}
+.nf
+nutscan_device_type_t   type;
+char *          driver;
+char *          port;
+nutscan_options_t       opt;
+struct nutscan_device * prev;
+struct nutscan_device * next;
+.fi
+.if n \{\
+.RE
+.\}
+.sp
+This is a double linked list of device\&. Each device is described by its type, its driver name, its port and any number of optional data\&.
+.sp
+The \fBnutscan_add_device_to_device()\fR concatenates \fIfirst\fR and \fIsecond\fR devices to a unique device\&. No new device is created, the two linked list are simply linked to each other\&. So \fIfirst\fR and \fIsecond\fR devices are likely to be modified by this function\&.
+.SH "RETURN VALUE"
+.sp
+The \fBnutscan_add_device_to_device()\fR functions returns a pointer to a device containg both passed devices\&. Note that it\(cqs not a new device, so it is either \fIfirst\fR or \fIsecond\fR which is returned\&.
+.SH "SEE ALSO"
+.sp
+\fBnutscan_scan_usb\fR(3), \fBnutscan_scan_xml_http\fR(3), \fBnutscan_scan_nut\fR(3), \fBnutscan_scan_avahi\fR(3), \fBnutscan_scan_ipmi\fR(3), \fBnutscan_scan_snmp\fR(3), \fBnutscan_display_ups_conf\fR(3), \fBnutscan_display_parsable\fR(3), \fBnutscan_new_device\fR(3), \fBnutscan_free_device\fR(3), \fBnutscan_add_option_to_device\fR(3)

docs/man/nutscan_add_device_to_device.txt

@@ -0,0 +1,45 @@
+NUTSCAN_ADD_DEVICE_TO_DEVICE(3)
+===============================
+
+NAME
+----
+
+nutscan_add_device_to_device - Concatenate two devices structure.
+
+SYNOPSIS
+--------
+
+ #include <nut-scan.h>
+
+ nutscan_device_t * nutscan_add_device_to_device(nutscan_device_t * first, nutscan_device_t * second);
+
+
+DESCRIPTION
+-----------
+
+The `nutscan_device_t` contains the following variables:
+
+	nutscan_device_type_t   type;
+        char *          driver;
+        char *          port;
+        nutscan_options_t       opt;
+        struct nutscan_device * prev;
+        struct nutscan_device * next;
+
+This is a double linked list of device. Each device is described by its `type`, its `driver` name, its `port` and any number of optional data.
+
+The *nutscan_add_device_to_device()* concatenates 'first' and 'second' devices to a unique device. No new device is created, the two linked list are simply linked to each other. So 'first' and 'second' devices are likely to be modified by this function.
+
+RETURN VALUE
+------------
+
+The *nutscan_add_device_to_device()* functions returns a pointer to a device containg both passed devices. Note that it's not a new device, so it is either 'first' or 'second' which is returned.
+
+SEE ALSO
+--------
+linkman:nutscan_scan_usb[3], linkman:nutscan_scan_xml_http[3], 
+linkman:nutscan_scan_nut[3], linkman:nutscan_scan_avahi[3], 
+linkman:nutscan_scan_ipmi[3], linkman:nutscan_scan_snmp[3],
+linkman:nutscan_display_ups_conf[3], linkman:nutscan_display_parsable[3],
+linkman:nutscan_new_device[3], linkman:nutscan_free_device[3],
+linkman:nutscan_add_option_to_device[3]

docs/man/nutscan_add_option_to_device.3

@@ -0,0 +1,65 @@
+'\" t
+.\"     Title: nutscan_add_option_to_device
+.\"    Author: [FIXME: author] [see http://docbook.sf.net/el/author]
+.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
+.\"      Date: 09/15/2011
+.\"    Manual: NUT Manual
+.\"    Source: Network UPS Tools
+.\"  Language: English
+.\"
+.TH "NUTSCAN_ADD_OPTION_T" "3" "09/15/2011" "Network UPS Tools" "NUT Manual"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+nutscan_add_option_to_device \- Add option data to the specified device\&.
+.SH "SYNOPSIS"
+.sp
+.nf
+#include <nut\-scan\&.h>
+.fi
+.sp
+.nf
+void nutscan_add_option_to_device(nutscan_device_t * device,char * option_name, char * value);
+.fi
+.SH "DESCRIPTION"
+.sp
+The nutscan_device_t contains the following variables:
+.sp
+.if n \{\
+.RS 4
+.\}
+.nf
+nutscan_device_type_t   type;
+char *          driver;
+char *          port;
+nutscan_options_t       opt;
+struct nutscan_device * prev;
+struct nutscan_device * next;
+.fi
+.if n \{\
+.RE
+.\}
+.sp
+This is a double linked list of device\&. Each device is described by its type, its driver name, its port and any number of optional data\&.
+.sp
+The \fBnutscan_add_option_to_device()\fR adds an optional data in the given devcie\&. Optional data are made of an \fIoption_name\fR and an associated \fIvalue\fR\&. Copies of \fIoption_name\fR and \fIvalue\fR are stored in the device, so the caller can safely free both of them\&.
+.SH "SEE ALSO"
+.sp
+\fBnutscan_scan_usb\fR(3), \fBnutscan_scan_xml_http\fR(3), \fBnutscan_scan_nut\fR(3), \fBnutscan_scan_avahi\fR(3), \fBnutscan_scan_ipmi\fR(3), \fBnutscan_scan_snmp\fR(3), \fBnutscan_display_ups_conf\fR(3), \fBnutscan_display_parsable\fR(3), \fBnutscan_new_device\fR(3), \fBnutscan_free_device\fR(3), \fBnutscan_add_device_to_device\fR(3)

docs/man/nutscan_add_option_to_device.txt

@@ -0,0 +1,40 @@
+NUTSCAN_ADD_OPTION_TO_DEVICE(3)
+===============================
+
+NAME
+----
+
+nutscan_add_option_to_device - Add option data to the specified device.
+
+SYNOPSIS
+--------
+
+ #include <nut-scan.h>
+
+ void nutscan_add_option_to_device(nutscan_device_t * device,char * option_name, char * value);
+
+
+DESCRIPTION
+-----------
+
+The `nutscan_device_t` contains the following variables:
+
+	nutscan_device_type_t   type;
+        char *          driver;
+        char *          port;
+        nutscan_options_t       opt;
+        struct nutscan_device * prev;
+        struct nutscan_device * next;
+
+This is a double linked list of device. Each device is described by its `type`, its `driver` name, its `port` and any number of optional data.
+
+The *nutscan_add_option_to_device()* adds an optional data in the given devcie. Optional data are made of an 'option_name' and an associated 'value'. Copies of 'option_name' and 'value' are stored in the device, so the caller can safely free both of them.
+
+SEE ALSO
+--------
+linkman:nutscan_scan_usb[3], linkman:nutscan_scan_xml_http[3], 
+linkman:nutscan_scan_nut[3], linkman:nutscan_scan_avahi[3], 
+linkman:nutscan_scan_ipmi[3], linkman:nutscan_scan_snmp[3],
+linkman:nutscan_display_ups_conf[3], linkman:nutscan_display_parsable[3],
+linkman:nutscan_new_device[3], linkman:nutscan_free_device[3],
+linkman:nutscan_add_device_to_device[3]

docs/man/nutscan_cidr_to_ip.3

@@ -0,0 +1,49 @@
+'\" t
+.\"     Title: nutscan_cidr_to_ip
+.\"    Author: [FIXME: author] [see http://docbook.sf.net/el/author]
+.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
+.\"      Date: 09/15/2011
+.\"    Manual: NUT Manual
+.\"    Source: Network UPS Tools
+.\"  Language: English
+.\"
+.TH "NUTSCAN_CIDR_TO_IP" "3" "09/15/2011" "Network UPS Tools" "NUT Manual"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+nutscan_cidr_to_ip \- Convert a CIDR IP to a range of IP address\&.
+.SH "SYNOPSIS"
+.sp
+.nf
+#include <nut\-scan\&.h>
+.fi
+.sp
+.nf
+int nutscan_cidr_to_ip(const char * cidr, char ** start_ip, char ** stop_ip);
+.fi
+.SH "DESCRIPTION"
+.sp
+The \fBnutscan_cidr_to_ip()\fR function converts a range of IP address in the CIDR format given as a string in \fIcidr\fR, to two IPs in strings pointed by \fIstart_ip\fR and \fIstop_ip\fR which can be used as input paramters in the scanning functions of the libnutscan API\&. It is the caller\(cqs responsability to free \fIstart_ip\fR and \fIstop_ip\fR strings\&.
+.SH "RETURN VALUE"
+.sp
+The \fBnutscan_cidr_to_ip()\fR function returns 0 if an error occured (invalid \fIcidr\fR address) or 1 if successful\&.
+.SH "SEE ALSO"
+.sp
+\fBnutscan_scan_usb\fR(3), \fBnutscan_scan_xml_http\fR(3), \fBnutscan_scan_nut\fR(3), \fBnutscan_scan_avahi\fR(3), \fBnutscan_scan_ipmi\fR(3), \fBnutscan_scan_snmp\fR(3), \fBnutscan_display_parsable\fR(3), \fBnutscan_display_ups_conf\fR(3)

docs/man/nutscan_cidr_to_ip.txt

@@ -0,0 +1,31 @@
+NUTSCAN_CIDR_TO_IP(3)
+=====================
+
+NAME
+----
+
+nutscan_cidr_to_ip - Convert a CIDR IP to a range of IP address.
+
+SYNOPSIS
+--------
+
+ #include <nut-scan.h>
+
+ int nutscan_cidr_to_ip(const char * cidr, char ** start_ip, char ** stop_ip);
+
+DESCRIPTION
+-----------
+
+The *nutscan_cidr_to_ip()* function converts a range of IP address in the CIDR format given as a string in 'cidr', to two IPs in strings pointed by 'start_ip' and 'stop_ip' which can be used as input paramters in the scanning functions of the libnutscan API. It is the caller's responsability to free 'start_ip' and 'stop_ip' strings.
+
+RETURN VALUE
+------------
+
+The *nutscan_cidr_to_ip()* function returns 0 if an error occured (invalid 'cidr' address) or 1 if successful.
+
+SEE ALSO
+--------
+linkman:nutscan_scan_usb[3], linkman:nutscan_scan_xml_http[3], 
+linkman:nutscan_scan_nut[3], linkman:nutscan_scan_avahi[3], 
+linkman:nutscan_scan_ipmi[3], linkman:nutscan_scan_snmp[3], 
+linkman:nutscan_display_parsable[3], linkman:nutscan_display_ups_conf[3]

docs/man/nutscan_display_parsable.3

@@ -0,0 +1,50 @@
+'\" t
+.\"     Title: nutscan_display_parsable
+.\"    Author: [FIXME: author] [see http://docbook.sf.net/el/author]
+.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
+.\"      Date: 09/15/2011
+.\"    Manual: NUT Manual
+.\"    Source: Network UPS Tools
+.\"  Language: English
+.\"
+.TH "NUTSCAN_DISPLAY_PARS" "3" "09/15/2011" "Network UPS Tools" "NUT Manual"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+nutscan_display_parsable \- Display the specified `nutscan_device_t` structure on stdout\&.
+.SH "SYNOPSIS"
+.sp
+.nf
+#include <nut\-scan\&.h>
+.fi
+.sp
+.nf
+void nutscan_display_parsable(nutscan_device_t * device);
+.fi
+.SH "DESCRIPTION"
+.sp
+The \fBnutscan_display_parsable()\fR function displays all NUT devices in \fIdevice\fR to stdout\&. It displays them in a way that can be easily parsed which is:
+.sp
+<driver type>:driver="<driver name>",port="<port type>"[,<optional parameter 1>="<optional data 1>",<optional parameter 2>="<optional data 2>",\&...]
+.sp
+<driver type> may be one of USB, SNMP, XML, NUT, IPMI or AVAHI\&. <driver name> is the name of the driver\(cqs binary corresponding to this device\&. <port type> and <optional parameter X> depend on <driver name>, see the corresponding driver\(cqs man page\&.
+.SH "SEE ALSO"
+.sp
+\fBnutscan_scan_usb\fR(3), \fBnutscan_scan_xml_http\fR(3), \fBnutscan_scan_nut\fR(3), \fBnutscan_scan_avahi\fR(3), \fBnutscan_scan_ipmi\fR(3), \fBnutscan_scan_snmp\fR(3), \fBnutscan_display_ups_conf\fR(3), \fBnutscan_new_device\fR(3), \fBnutscan_free_device\fR(3), \fBnutscan_add_option_to_device\fR(3), \fBnutscan_add_device_to_device\fR(3), \fBnutscan_cidr_to_ip\fR(3)

docs/man/nutscan_display_parsable.txt

@@ -0,0 +1,34 @@
+NUTSCAN_DISPLAY_PARSABLE(3)
+===========================
+
+NAME
+----
+
+nutscan_display_parsable - Display the specified `nutscan_device_t` structure on stdout.
+
+SYNOPSIS
+--------
+
+ #include <nut-scan.h>
+
+ void nutscan_display_parsable(nutscan_device_t * device);
+
+DESCRIPTION
+-----------
+
+The *nutscan_display_parsable()* function displays all NUT devices in 'device' to stdout. It displays them in a way that can be easily parsed which is:
+
+<driver type>:driver="<driver name>",port="<port type>"[,<optional parameter 1>="<optional data 1>",<optional parameter 2>="<optional data 2>",...]
+
+<driver type> may be one of USB, SNMP, XML, NUT, IPMI or AVAHI.
+<driver name> is the name of the driver's binary corresponding to this device.
+<port type> and <optional parameter X> depend on <driver name>, see the corresponding driver's man page.
+
+SEE ALSO
+--------
+linkman:nutscan_scan_usb[3], linkman:nutscan_scan_xml_http[3], 
+linkman:nutscan_scan_nut[3], linkman:nutscan_scan_avahi[3], 
+linkman:nutscan_scan_ipmi[3], linkman:nutscan_scan_snmp[3], 
+linkman:nutscan_display_ups_conf[3], linkman:nutscan_new_device[3],
+linkman:nutscan_free_device[3], linkman:nutscan_add_option_to_device[3],
+linkman:nutscan_add_device_to_device[3], linkman:nutscan_cidr_to_ip[3]

docs/man/nutscan_display_ups_conf.3

@@ -0,0 +1,46 @@
+'\" t
+.\"     Title: nutscan_display_ups_conf
+.\"    Author: [FIXME: author] [see http://docbook.sf.net/el/author]
+.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
+.\"      Date: 09/15/2011
+.\"    Manual: NUT Manual
+.\"    Source: Network UPS Tools
+.\"  Language: English
+.\"
+.TH "NUTSCAN_DISPLAY_UPS_" "3" "09/15/2011" "Network UPS Tools" "NUT Manual"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+nutscan_display_ups_conf \- Display the specified `nutscan_device_t` structure on stdout\&.
+.SH "SYNOPSIS"
+.sp
+.nf
+#include <nut\-scan\&.h>
+.fi
+.sp
+.nf
+void nutscan_display_ups_conf(nutscan_device_t * device);
+.fi
+.SH "DESCRIPTION"
+.sp
+The \fBnutscan_display_ups_conf()\fR function displays all NUT devices in \fIdevice\fR to stdout\&. It displays them in a way that it can be directly copied into the ups\&.conf file\&.
+.SH "SEE ALSO"
+.sp
+\fBnutscan_scan_usb\fR(3), \fBnutscan_scan_xml_http\fR(3), \fBnutscan_scan_nut\fR(3), \fBnutscan_scan_avahi\fR(3), \fBnutscan_scan_ipmi\fR(3), \fBnutscan_scan_snmp\fR(3), \fBnutscan_display_parsable\fR(3), \fBnutscan_new_device\fR(3), \fBnutscan_free_device\fR(3), \fBnutscan_add_option_to_device\fR(3), \fBnutscan_add_device_to_device\fR(3), \fBnutscan_cidr_to_ip\fR(3)

docs/man/nutscan_display_ups_conf.txt

@@ -0,0 +1,28 @@
+NUTSCAN_DISPLAY_UPS_CONF(3)
+===========================
+
+NAME
+----
+
+nutscan_display_ups_conf - Display the specified `nutscan_device_t` structure on stdout.
+
+SYNOPSIS
+--------
+
+ #include <nut-scan.h>
+
+ void nutscan_display_ups_conf(nutscan_device_t * device);
+
+DESCRIPTION
+-----------
+
+The *nutscan_display_ups_conf()* function displays all NUT devices in 'device' to stdout. It displays them in a way that it can be directly copied into the ups.conf file.
+
+SEE ALSO
+--------
+linkman:nutscan_scan_usb[3], linkman:nutscan_scan_xml_http[3], 
+linkman:nutscan_scan_nut[3], linkman:nutscan_scan_avahi[3], 
+linkman:nutscan_scan_ipmi[3], linkman:nutscan_scan_snmp[3], 
+linkman:nutscan_display_parsable[3], linkman:nutscan_new_device[3],
+linkman:nutscan_free_device[3], linkman:nutscan_add_option_to_device[3],
+linkman:nutscan_add_device_to_device[3], linkman:nutscan_cidr_to_ip[3]

docs/man/nutscan_free_device.3

@@ -0,0 +1,46 @@
+'\" t
+.\"     Title: nutscan_free_device
+.\"    Author: [FIXME: author] [see http://docbook.sf.net/el/author]
+.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
+.\"      Date: 09/15/2011
+.\"    Manual: NUT Manual
+.\"    Source: Network UPS Tools
+.\"  Language: English
+.\"
+.TH "NUTSCAN_FREE_DEVICE" "3" "09/15/2011" "Network UPS Tools" "NUT Manual"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+nutscan_free_device \- Free a nutscan_device_t structure created by nutscan_new_device\&.
+.SH "SYNOPSIS"
+.sp
+.nf
+#include <nut\-scan\&.h>
+.fi
+.sp
+.nf
+void nutscan_free_device(nutscan_device_t * device);
+.fi
+.SH "DESCRIPTION"
+.sp
+The \fBnutscan_free_device()\fR function free a nutscan_device_type_t structure\&. Doing so, it free the whole linked list, not only the given device\&.
+.SH "SEE ALSO"
+.sp
+\fBnutscan_scan_usb\fR(3), \fBnutscan_scan_xml_http\fR(3), \fBnutscan_scan_nut\fR(3), \fBnutscan_scan_avahi\fR(3), \fBnutscan_scan_ipmi\fR(3), \fBnutscan_scan_snmp\fR(3), \fBnutscan_display_ups_conf\fR(3), \fBnutscan_display_parsable\fR(3), \fBnutscan_new_device\fR(3), \fBnutscan_add_option_to_device\fR(3), \fBnutscan_add_device_to_device\fR(3)

docs/man/nutscan_free_device.txt

@@ -0,0 +1,28 @@
+NUTSCAN_FREE_DEVICE(3)
+======================
+
+NAME
+----
+
+nutscan_free_device - Free a nutscan_device_t structure created by nutscan_new_device.
+
+SYNOPSIS
+--------
+
+ #include <nut-scan.h>
+
+ void nutscan_free_device(nutscan_device_t * device);
+
+DESCRIPTION
+-----------
+
+The *nutscan_free_device()* function free a `nutscan_device_type_t` structure. Doing so, it free the whole linked list, not only the given device.
+
+SEE ALSO
+--------
+linkman:nutscan_scan_usb[3], linkman:nutscan_scan_xml_http[3], 
+linkman:nutscan_scan_nut[3], linkman:nutscan_scan_avahi[3], 
+linkman:nutscan_scan_ipmi[3], linkman:nutscan_scan_snmp[3],
+linkman:nutscan_display_ups_conf[3], linkman:nutscan_display_parsable[3],
+linkman:nutscan_new_device[3], linkman:nutscan_add_option_to_device[3],
+linkman:nutscan_add_device_to_device[3]

docs/man/nutscan_new_device.3

@@ -0,0 +1,49 @@
+'\" t
+.\"     Title: nutscan_new_device
+.\"    Author: [FIXME: author] [see http://docbook.sf.net/el/author]
+.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
+.\"      Date: 09/15/2011
+.\"    Manual: NUT Manual
+.\"    Source: Network UPS Tools
+.\"  Language: English
+.\"
+.TH "NUTSCAN_NEW_DEVICE" "3" "09/15/2011" "Network UPS Tools" "NUT Manual"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+nutscan_new_device \- Create a new nutscan_device_t structure\&.
+.SH "SYNOPSIS"
+.sp
+.nf
+#include <nut\-scan\&.h>
+.fi
+.sp
+.nf
+nutscan_device_t * nutscan_new_device();
+.fi
+.SH "DESCRIPTION"
+.sp
+The \fBnutscan_new_device()\fR function allocates a new nutscan_device_type_t structure\&.
+.SH "RETURN VALUE"
+.sp
+The \fBnutscan_new_device()\fR function returns the newly allocated nutscan_device_type_t structure
+.SH "SEE ALSO"
+.sp
+\fBnutscan_scan_usb\fR(3), \fBnutscan_scan_xml_http\fR(3), \fBnutscan_scan_nut\fR(3), \fBnutscan_scan_avahi\fR(3), \fBnutscan_scan_ipmi\fR(3), \fBnutscan_scan_snmp\fR(3) \fBnutscan_display_ups_conf\fR(3), \fBnutscan_display_parsable\fR(3) \fBnutscan_free_device\fR(3), \fBnutscan_add_option_to_device\fR(3) \fBnutscan_add_device_to_device\fR(3)

docs/man/nutscan_new_device.txt

@@ -0,0 +1,33 @@
+NUTSCAN_NEW_DEVICE(3)
+======================
+
+NAME
+----
+
+nutscan_new_device - Create a new nutscan_device_t structure.
+
+SYNOPSIS
+--------
+
+ #include <nut-scan.h>
+
+ nutscan_device_t * nutscan_new_device();
+
+DESCRIPTION
+-----------
+
+The *nutscan_new_device()* function allocates a new `nutscan_device_type_t` structure.
+
+RETURN VALUE
+------------
+
+The *nutscan_new_device()* function returns the newly allocated `nutscan_device_type_t` structure
+
+SEE ALSO
+--------
+linkman:nutscan_scan_usb[3], linkman:nutscan_scan_xml_http[3], 
+linkman:nutscan_scan_nut[3], linkman:nutscan_scan_avahi[3], 
+linkman:nutscan_scan_ipmi[3], linkman:nutscan_scan_snmp[3]
+linkman:nutscan_display_ups_conf[3], linkman:nutscan_display_parsable[3]
+linkman:nutscan_free_device[3], linkman:nutscan_add_option_to_device[3]
+linkman:nutscan_add_device_to_device[3]

docs/man/nutscan_scan_avahi.3

@@ -0,0 +1,51 @@
+'\" t
+.\"     Title: nutscan_scan_avahi
+.\"    Author: [FIXME: author] [see http://docbook.sf.net/el/author]
+.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
+.\"      Date: 09/15/2011
+.\"    Manual: NUT Manual
+.\"    Source: Network UPS Tools
+.\"  Language: English
+.\"
+.TH "NUTSCAN_SCAN_AVAHI" "3" "09/15/2011" "Network UPS Tools" "NUT Manual"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+nutscan_scan_avahi \- Scan network for NUT services via AVAHI\&.
+.SH "SYNOPSIS"
+.sp
+.nf
+#include <nut\-scan\&.h>
+.fi
+.sp
+.nf
+nutscan_device_t * nutscan_scan_avahi(long usec_timeout);
+.fi
+.SH "DESCRIPTION"
+.sp
+The \fBnutscan_scan_avahi()\fR function try to detect NUT service and its associated devcies\&. It uses the AVAHI library to do so\&.
+.sp
+This function waits up to \fIusec_timeout\fR microseconds before considering an IP address does not respond\&.
+.SH "RETURN VALUE"
+.sp
+The \fBnutscan_scan_avahi()\fR function returns a pointer to a nutscan_device_t structure containing all found devices or NULL if an error occurs or no device is found\&.
+.SH "SEE ALSO"
+.sp
+\fBnutscan_scan_usb\fR(3), \fBnutscan_scan_xml_http\fR(3), \fBnutscan_scan_nut\fR(3), \fBnutscan_scan_snmp\fR(3), \fBnutscan_scan_ipmi\fR(3), \fBnutscan_display_ups_conf\fR(3), \fBnutscan_display_parsable\fR(3), \fBnutscan_new_device\fR(3), \fBnutscan_free_device\fR(3), \fBnutscan_add_option_to_device\fR(3), \fBnutscan_add_device_to_device\fR(3), \fBnutscan_cidr_to_ip\fR(3)

docs/man/nutscan_scan_avahi.txt

@@ -0,0 +1,35 @@
+NUTSCAN_SCAN_AVAHI(3)
+=====================
+
+NAME
+----
+
+nutscan_scan_avahi - Scan network for NUT services via AVAHI.
+
+SYNOPSIS
+--------
+
+ #include <nut-scan.h>
+
+ nutscan_device_t * nutscan_scan_avahi(long usec_timeout);
+
+DESCRIPTION
+-----------
+
+The *nutscan_scan_avahi()* function try to detect NUT service and its associated devcies. It uses the AVAHI library to do so.
+
+This function waits up to 'usec_timeout' microseconds before considering an IP address does not respond.
+
+RETURN VALUE
+------------
+
+The *nutscan_scan_avahi()* function returns a pointer to a `nutscan_device_t` structure containing all found devices or NULL if an error occurs or no device is found.
+
+SEE ALSO
+--------
+linkman:nutscan_scan_usb[3], linkman:nutscan_scan_xml_http[3], 
+linkman:nutscan_scan_nut[3], linkman:nutscan_scan_snmp[3], 
+linkman:nutscan_scan_ipmi[3], linkman:nutscan_display_ups_conf[3], 
+linkman:nutscan_display_parsable[3], linkman:nutscan_new_device[3],
+linkman:nutscan_free_device[3], linkman:nutscan_add_option_to_device[3],
+linkman:nutscan_add_device_to_device[3], linkman:nutscan_cidr_to_ip[3]

docs/man/nutscan_scan_ipmi.3

@@ -0,0 +1,49 @@
+'\" t
+.\"     Title: nutscan_scan_ipmi
+.\"    Author: [FIXME: author] [see http://docbook.sf.net/el/author]
+.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
+.\"      Date: 09/15/2011
+.\"    Manual: NUT Manual
+.\"    Source: Network UPS Tools
+.\"  Language: English
+.\"
+.TH "NUTSCAN_SCAN_IPMI" "3" "09/15/2011" "Network UPS Tools" "NUT Manual"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+nutscan_scan_ipmi \- Scan local IPMI devices\&.
+.SH "SYNOPSIS"
+.sp
+.nf
+#include <nut\-scan\&.h>
+.fi
+.sp
+.nf
+nutscan_device_t * nutscan_scan_ipmi(void);
+.fi
+.SH "DESCRIPTION"
+.sp
+The \fBnutscan_scan_ipmi()\fR function is not implemented yet\&.
+.SH "RETURN VALUE"
+.sp
+The \fBnutscan_scan_ipmi()\fR function is not implemented yet\&.
+.SH "SEE ALSO"
+.sp
+\fBnutscan_scan_usb\fR(3), \fBnutscan_scan_xml_http\fR(3), \fBnutscan_scan_nut\fR(3), \fBnutscan_scan_avahi\fR(3), \fBnutscan_scan_snmp\fR(3), \fBnutscan_display_ups_conf\fR(3), \fBnutscan_display_parsable\fR(3), \fBnutscan_new_device\fR(3), \fBnutscan_free_device\fR(3), \fBnutscan_add_option_to_device\fR(3), \fBnutscan_add_device_to_device\fR(3), \fBnutscan_cidr_to_ip\fR(3)

docs/man/nutscan_scan_ipmi.txt

@@ -0,0 +1,33 @@
+NUTSCAN_SCAN_IPMI(3)
+====================
+
+NAME
+----
+
+nutscan_scan_ipmi - Scan local IPMI devices.
+
+SYNOPSIS
+--------
+
+ #include <nut-scan.h>
+
+ nutscan_device_t * nutscan_scan_ipmi(void);
+
+DESCRIPTION
+-----------
+
+The *nutscan_scan_ipmi()* function is not implemented yet.
+
+RETURN VALUE
+------------
+
+The *nutscan_scan_ipmi()* function is not implemented yet.
+
+SEE ALSO
+--------
+linkman:nutscan_scan_usb[3], linkman:nutscan_scan_xml_http[3], 
+linkman:nutscan_scan_nut[3], linkman:nutscan_scan_avahi[3], 
+linkman:nutscan_scan_snmp[3], linkman:nutscan_display_ups_conf[3], 
+linkman:nutscan_display_parsable[3], linkman:nutscan_new_device[3],
+linkman:nutscan_free_device[3], linkman:nutscan_add_option_to_device[3],
+linkman:nutscan_add_device_to_device[3], linkman:nutscan_cidr_to_ip[3]

docs/man/nutscan_scan_nut.3

@@ -0,0 +1,53 @@
+'\" t
+.\"     Title: nutscan_scan_nut
+.\"    Author: [FIXME: author] [see http://docbook.sf.net/el/author]
+.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
+.\"      Date: 09/15/2011
+.\"    Manual: NUT Manual
+.\"    Source: Network UPS Tools
+.\"  Language: English
+.\"
+.TH "NUTSCAN_SCAN_NUT" "3" "09/15/2011" "Network UPS Tools" "NUT Manual"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+nutscan_scan_nut \- Scan network for available NUT services\&.
+.SH "SYNOPSIS"
+.sp
+.nf
+#include <nut\-scan\&.h>
+.fi
+.sp
+.nf
+nutscan_device_t * nutscan_scan_nut(const char * startIP, const char * stopIP, const char * port, long usec_timeout);
+.fi
+.SH "DESCRIPTION"
+.sp
+The \fBnutscan_scan_nut()\fR function try to detect available NUT services and their associated devices\&. It issues a NUT request on every IP ranging from \fIstartIP\fR to \fIstopIP\fR\&. \fIstartIP\fR is mandatory, \fIstopIP\fR is optional\&. Those IP may be either IPv4 or IPv6 addresses or host names\&.
+.sp
+A specific \fIport\fR number may be passed, or NULL to use the default NUT port\&.
+.sp
+This function waits up to \fIusec_timeout\fR microseconds before considering an IP address does not respond to NUT queries\&.
+.SH "RETURN VALUE"
+.sp
+The \fBnutscan_scan_nut()\fR function returns a pointer to a nutscan_device_t structure containing all found devices or NULL if an error occurs or no device is found\&.
+.SH "SEE ALSO"
+.sp
+\fBnutscan_scan_usb\fR(3), \fBnutscan_scan_xml_http\fR(3), \fBnutscan_scan_snmp\fR(3), \fBnutscan_scan_avahi\fR(3), \fBnutscan_scan_ipmi\fR(3), \fBnutscan_display_ups_conf\fR(3), \fBnutscan_display_parsable\fR(3), \fBnutscan_new_device\fR(3), \fBnutscan_free_device\fR(3), \fBnutscan_add_option_to_device\fR(3), \fBnutscan_add_device_to_device\fR(3), \fBnutscan_cidr_to_ip\fR(3)

docs/man/nutscan_scan_nut.txt

@@ -0,0 +1,37 @@
+NUTSCAN_SCAN_NUT(3)
+===================
+
+NAME
+----
+
+nutscan_scan_nut - Scan network for available NUT services.
+
+SYNOPSIS
+--------
+
+ #include <nut-scan.h>
+
+ nutscan_device_t * nutscan_scan_nut(const char * startIP, const char * stopIP, const char * port, long usec_timeout);
+
+DESCRIPTION
+-----------
+
+The *nutscan_scan_nut()* function try to detect available NUT services and their associated devices. It issues a NUT request on every IP ranging from 'startIP' to 'stopIP'. 'startIP' is mandatory, 'stopIP' is optional. Those IP may be either IPv4 or IPv6 addresses or host names.
+
+A specific 'port' number may be passed, or NULL to use the default NUT port.
+
+This function waits up to 'usec_timeout' microseconds before considering an IP address does not respond to NUT queries.
+
+RETURN VALUE
+------------
+
+The *nutscan_scan_nut()* function returns a pointer to a `nutscan_device_t` structure containing all found devices or NULL if an error occurs or no device is found.
+
+SEE ALSO
+--------
+linkman:nutscan_scan_usb[3], linkman:nutscan_scan_xml_http[3], 
+linkman:nutscan_scan_snmp[3], linkman:nutscan_scan_avahi[3], 
+linkman:nutscan_scan_ipmi[3], linkman:nutscan_display_ups_conf[3], 
+linkman:nutscan_display_parsable[3], linkman:nutscan_new_device[3],
+linkman:nutscan_free_device[3], linkman:nutscan_add_option_to_device[3],
+linkman:nutscan_add_device_to_device[3], linkman:nutscan_cidr_to_ip[3]

docs/man/nutscan_scan_snmp.3

@@ -0,0 +1,87 @@
+'\" t
+.\"     Title: nutscan_scan_snmp
+.\"    Author: [FIXME: author] [see http://docbook.sf.net/el/author]
+.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
+.\"      Date: 09/15/2011
+.\"    Manual: NUT Manual
+.\"    Source: Network UPS Tools
+.\"  Language: English
+.\"
+.TH "NUTSCAN_SCAN_SNMP" "3" "09/15/2011" "Network UPS Tools" "NUT Manual"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+nutscan_scan_snmp \- Scan network for SNMP devices\&.
+.SH "SYNOPSIS"
+.sp
+.nf
+#include <nut\-scan\&.h>
+.fi
+.sp
+.nf
+nutscan_device_t * nutscan_scan_snmp(const char * start_ip,const char * stop_ip,long timeout, nutscan_snmp_t * sec);
+.fi
+.SH "DESCRIPTION"
+.sp
+The \fBnutscan_scan_snmp()\fR function try to detect NUT compatible SNMP devices\&. It tries SNMP queries on every IP ranging from \fIstart_ip\fR to \fIstop_ip\fR\&. Those IP may be either IPv4 or IPv6 addresses or host names\&.
+.sp
+This function waits up to \fItimeout\fR microseconds before considering an IP address does not respond to SNMP queries\&.
+.sp
+A valid nutscan_snmp_t structure must be passed to this function\&.
+.sp
+The nutscan_snmp_t structure contains the following members which must be filled as described below:
+.sp
+.if n \{\
+.RS 4
+.\}
+.nf
+char * \*(Aqcommunity\*(Aq;
+char * \*(AqsecLevel\*(Aq;
+char * \*(AqsecName\*(Aq;
+char * \*(AqauthPassword\*(Aq;
+char * \*(AqprivPassword\*(Aq;
+char * \*(AqauthProtocol\*(Aq;
+char * \*(AqprivProtocol\*(Aq;
+.fi
+.if n \{\
+.RE
+.\}
+.sp
+If \fIcommunity\fR is not NULL, SNMP v1 request are sent using this \fIcommunity\fR\&.
+.sp
+If \fIcommunity\fR is NULL and \fIsecLevel\fR is NULL, SNMP v1 is selected and \fIcommunity\fR is set to "public"\&.
+.sp
+In the other cases, SNMP v3 is used\&. \fIsecLevel\fR may be one of SNMP_SEC_LEVEL_NOAUTH, SNMP_SEC_LEVEL_AUTHNOPRIV or SNMP_SEC_LEVEL_AUTHPRIV\&. \fIsecName\fR is the security name and must be non NULL\&.
+.sp
+If \fIsecLevel\fR is set to SNMP_SEC_LEVEL_AUTHNOPRIV, \fIauthPassword\fR must be non NULL\&.
+.sp
+If \fIsecLevel\fR is set to SNMP_SEC_LEVEL_AUTHPRIV, \fIauthPassword\fR and \fIprivPassword\fR must be non NULL\&.
+.sp
+If \fIauthProtocol\fR is NULL, MD5 protocol is used\&. Else you can set \fIauthProtocol\fR to either "MD5" or "SHA"\&.
+.sp
+If \fIprivProtocol\fR is NULL, DES protocol is used\&. Else you can set \fIprivProtocol\fR to either "AES" or "DES"\&.
+.sp
+\fIpeername\fR and \fIhandle\fR are used internally and do not need any initialization\&.
+.SH "RETURN VALUE"
+.sp
+The \fBnutscan_scan_snmp()\fR function returns a pointer to a nutscan_device_t structure containing all found devices or NULL if an error occurs or no device is found\&.
+.SH "SEE ALSO"
+.sp
+\fBnutscan_scan_usb\fR(3), \fBnutscan_scan_xml_http\fR(3), \fBnutscan_scan_nut\fR(3), \fBnutscan_scan_avahi\fR(3), \fBnutscan_scan_ipmi\fR(3), \fBnutscan_display_ups_conf\fR(3), \fBnutscan_display_parsable\fR(3), \fBnutscan_new_device\fR(3), \fBnutscan_free_device\fR(3), \fBnutscan_add_option_to_device\fR(3), \fBnutscan_add_device_to_device\fR(3), \fBnutscan_cidr_to_ip\fR(3)

docs/man/nutscan_scan_snmp.txt

@@ -0,0 +1,63 @@
+NUTSCAN_SCAN_SNMP(3)
+====================
+
+NAME
+----
+
+nutscan_scan_snmp - Scan network for SNMP devices.
+
+SYNOPSIS
+--------
+
+ #include <nut-scan.h>
+
+ nutscan_device_t * nutscan_scan_snmp(const char * start_ip,const char * stop_ip,long timeout, nutscan_snmp_t * sec);
+
+DESCRIPTION
+-----------
+
+The *nutscan_scan_snmp()* function try to detect NUT compatible SNMP devices. It tries SNMP queries on every IP ranging from 'start_ip' to 'stop_ip'. Those IP may be either IPv4 or IPv6 addresses or host names.
+
+This function waits up to 'timeout' microseconds before considering an IP address does not respond to SNMP queries.
+
+A valid `nutscan_snmp_t` structure must be passed to this function.
+
+The `nutscan_snmp_t` structure contains the following members which must be filled as described below:
+
+	char * 'community';
+	char * 'secLevel';
+	char * 'secName';
+	char * 'authPassword';
+	char * 'privPassword';
+	char * 'authProtocol';
+	char * 'privProtocol';
+
+If 'community' is not NULL, SNMP v1 request are sent using this 'community'.
+
+If 'community' is NULL and 'secLevel' is NULL, SNMP v1 is selected and 'community' is set to "public".
+
+In the other cases, SNMP v3 is used. 'secLevel' may be one of `SNMP_SEC_LEVEL_NOAUTH`, `SNMP_SEC_LEVEL_AUTHNOPRIV` or `SNMP_SEC_LEVEL_AUTHPRIV`. 'secName' is the security name and must be non NULL.
+
+If 'secLevel' is set to `SNMP_SEC_LEVEL_AUTHNOPRIV`, 'authPassword' must be non NULL.
+
+If 'secLevel' is set to `SNMP_SEC_LEVEL_AUTHPRIV`, 'authPassword' and 'privPassword' must be non NULL.
+
+If 'authProtocol' is NULL, MD5 protocol is used. Else you can set 'authProtocol' to either "MD5" or "SHA".
+
+If 'privProtocol' is NULL, DES protocol is used. Else you can set 'privProtocol' to either "AES" or "DES".
+
+'peername' and 'handle' are used internally and do not need any initialization.
+
+RETURN VALUE
+------------
+
+The *nutscan_scan_snmp()* function returns a pointer to a `nutscan_device_t` structure containing all found devices or NULL if an error occurs or no device is found.
+
+SEE ALSO
+--------
+linkman:nutscan_scan_usb[3], linkman:nutscan_scan_xml_http[3], 
+linkman:nutscan_scan_nut[3], linkman:nutscan_scan_avahi[3], 
+linkman:nutscan_scan_ipmi[3], linkman:nutscan_display_ups_conf[3], 
+linkman:nutscan_display_parsable[3], linkman:nutscan_new_device[3],
+linkman:nutscan_free_device[3], linkman:nutscan_add_option_to_device[3],
+linkman:nutscan_add_device_to_device[3], linkman:nutscan_cidr_to_ip[3]

docs/man/nutscan_scan_usb.3

@@ -0,0 +1,49 @@
+'\" t
+.\"     Title: nutscan_scan_usb
+.\"    Author: [FIXME: author] [see http://docbook.sf.net/el/author]
+.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
+.\"      Date: 09/15/2011
+.\"    Manual: NUT Manual
+.\"    Source: Network UPS Tools
+.\"  Language: English
+.\"
+.TH "NUTSCAN_SCAN_USB" "3" "09/15/2011" "Network UPS Tools" "NUT Manual"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+nutscan_scan_usb \- Scan NUT compatible USB devices\&.
+.SH "SYNOPSIS"
+.sp
+.nf
+#include <nut\-scan\&.h>
+.fi
+.sp
+.nf
+nutscan_device_t * nutscan_scan_usb();
+.fi
+.SH "DESCRIPTION"
+.sp
+The \fBnutscan_scan_usb()\fR function try to detect NUT compatible USB devices\&.
+.SH "RETURN VALUE"
+.sp
+The \fBnutscan_scan_usb()\fR function returns a pointer to a nutscan_device_t structure containing all found devices or NULL if an error occurs or no device is found\&.
+.SH "SEE ALSO"
+.sp
+\fBnutscan_scan_snmp\fR(3), \fBnutscan_scan_xml_http\fR(3), \fBnutscan_scan_nut\fR(3), \fBnutscan_scan_avahi\fR(3), \fBnutscan_scan_ipmi\fR(3), \fBnutscan_display_ups_conf\fR(3), \fBnutscan_display_parsable\fR(3), \fBnutscan_new_device\fR(3), \fBnutscan_free_device\fR(3), \fBnutscan_add_option_to_device\fR(3), \fBnutscan_add_device_to_device\fR(3)

docs/man/nutscan_scan_usb.txt

@@ -0,0 +1,33 @@
+NUTSCAN_SCAN_USB(3)
+====================
+
+NAME
+----
+
+nutscan_scan_usb - Scan NUT compatible USB devices.
+
+SYNOPSIS
+--------
+
+ #include <nut-scan.h>
+
+ nutscan_device_t * nutscan_scan_usb();
+
+DESCRIPTION
+-----------
+
+The *nutscan_scan_usb()* function try to detect NUT compatible USB devices.
+
+RETURN VALUE
+------------
+
+The *nutscan_scan_usb()* function returns a pointer to a `nutscan_device_t` structure containing all found devices or NULL if an error occurs or no device is found.
+
+SEE ALSO
+--------
+linkman:nutscan_scan_snmp[3], linkman:nutscan_scan_xml_http[3], 
+linkman:nutscan_scan_nut[3], linkman:nutscan_scan_avahi[3], 
+linkman:nutscan_scan_ipmi[3], linkman:nutscan_display_ups_conf[3], 
+linkman:nutscan_display_parsable[3], linkman:nutscan_new_device[3],
+linkman:nutscan_free_device[3], linkman:nutscan_add_option_to_device[3],
+linkman:nutscan_add_device_to_device[3]

docs/man/nutscan_scan_xml_http.3

@@ -0,0 +1,49 @@
+'\" t
+.\"     Title: nutscan_scan_xml_http
+.\"    Author: [FIXME: author] [see http://docbook.sf.net/el/author]
+.\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
+.\"      Date: 09/15/2011
+.\"    Manual: NUT Manual
+.\"    Source: Network UPS Tools
+.\"  Language: English
+.\"
+.TH "NUTSCAN_SCAN_XML_HTT" "3" "09/15/2011" "Network UPS Tools" "NUT Manual"
+.\" -----------------------------------------------------------------
+.\" * Define some portability stuff
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" http://bugs.debian.org/507673
+.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
+.\" disable hyphenation
+.nh
+.\" disable justification (adjust text to left margin only)
+.ad l
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "NAME"
+nutscan_scan_xml_http \- Scan network for XML/HTTP devices\&.
+.SH "SYNOPSIS"
+.sp
+.nf
+#include <nut\-scan\&.h>
+.fi
+.sp
+.nf
+nutscan_device_t * nutscan_scan_xml_http(long usec_timeout);
+.fi
+.SH "DESCRIPTION"
+.sp
+The \fBnutscan_scan_xml_http()\fR function try to detect NUT compatible XML/HTTP devices\&. It does this by issuing a broadcast message on currently configured network interfaces\&. It waits up to \fIusec_timeout\fR microseconds for a response from potential devices\&.
+.SH "RETURN VALUE"
+.sp
+The \fBnutscan_scan_xml_http()\fR function returns a pointer to a nutscan_device_t structure containing all found devices or NULL if an error occurs or no device is found\&.
+.SH "SEE ALSO"
+.sp
+\fBnutscan_scan_usb\fR(3), \fBnutscan_scan_snmp\fR(3), \fBnutscan_scan_nut\fR(3), \fBnutscan_scan_avahi\fR(3), \fBnutscan_scan_ipmi\fR(3), \fBnutscan_display_ups_conf\fR(3), \fBnutscan_display_parsable\fR(3), \fBnutscan_new_device\fR(3), \fBnutscan_free_device\fR(3), \fBnutscan_add_option_to_device\fR(3), \fBnutscan_add_device_to_device\fR(3)

docs/man/nutscan_scan_xml_http.txt

@@ -0,0 +1,33 @@
+NUTSCAN_SCAN_XML_HTTP(3)
+========================
+
+NAME
+----
+
+nutscan_scan_xml_http - Scan network for XML/HTTP devices.
+
+SYNOPSIS
+--------
+
+ #include <nut-scan.h>
+
+ nutscan_device_t * nutscan_scan_xml_http(long usec_timeout);
+
+DESCRIPTION
+-----------
+
+The *nutscan_scan_xml_http()* function try to detect NUT compatible XML/HTTP devices. It does this by issuing a broadcast message on currently configured network interfaces. It waits up to 'usec_timeout' microseconds for a response from potential devices.
+
+RETURN VALUE
+------------
+
+The *nutscan_scan_xml_http()* function returns a pointer to a `nutscan_device_t` structure containing all found devices or NULL if an error occurs or no device is found.
+
+SEE ALSO
+--------
+linkman:nutscan_scan_usb[3], linkman:nutscan_scan_snmp[3], 
+linkman:nutscan_scan_nut[3], linkman:nutscan_scan_avahi[3], 
+linkman:nutscan_scan_ipmi[3], linkman:nutscan_display_ups_conf[3], 
+linkman:nutscan_display_parsable[3], linkman:nutscan_new_device[3],
+linkman:nutscan_free_device[3], linkman:nutscan_add_option_to_device[3],
+linkman:nutscan_add_device_to_device[3]

docs/man/nutupsdrv.8

@@ -2,12 +2,12 @@
 .\"     Title: nutupsdrv
 .\"    Author: [FIXME: author] [see http://docbook.sf.net/el/author]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "NUTUPSDRV" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "NUTUPSDRV" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/oneac.8

@@ -2,12 +2,12 @@
 .\"     Title: oneac
 .\"    Author: [see the "AUTHOR" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "ONEAC" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "ONEAC" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/optiups.8

@@ -2,12 +2,12 @@
 .\"     Title: optiups
 .\"    Author: [see the "AUTHOR" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "OPTIUPS" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "OPTIUPS" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/powercom.8

@@ -2,12 +2,12 @@
 .\"     Title: powercom
 .\"    Author: [see the "AUTHOR" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "POWERCOM" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "POWERCOM" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/powerman-pdu.8

@@ -2,12 +2,12 @@
 .\"     Title: powerman-pdu
 .\"    Author: [see the "AUTHOR" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "POWERMAN\-PDU" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "POWERMAN\-PDU" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/powerpanel.8

@@ -2,12 +2,12 @@
 .\"     Title: powerpanel
 .\"    Author: [see the "AUTHORS" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "POWERPANEL" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "POWERPANEL" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/rhino.8

@@ -2,12 +2,12 @@
 .\"     Title: rhino
 .\"    Author: [see the "AUTHOR" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "RHINO" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "RHINO" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/richcomm_usb.8

@@ -2,12 +2,12 @@
 .\"     Title: richcomm_usb
 .\"    Author: [see the "AUTHORS" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "RICHCOMM_USB" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "RICHCOMM_USB" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/safenet.8

@@ -2,12 +2,12 @@
 .\"     Title: safenet
 .\"    Author: [see the "AUTHOR" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "SAFENET" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "SAFENET" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/snmp-ups.8

@@ -2,12 +2,12 @@
 .\"     Title: snmp-ups
 .\"    Author: [see the "AUTHORS" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "SNMP\-UPS" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "SNMP\-UPS" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/solis.8

@@ -2,12 +2,12 @@
 .\"     Title: solis
 .\"    Author: [see the "AUTHOR" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "SOLIS" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "SOLIS" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------

docs/man/tripplite.8

@@ -2,12 +2,12 @@
 .\"     Title: tripplite
 .\"    Author: [see the "AUTHORS" section]
 .\" Generator: DocBook XSL Stylesheets v1.75.2 <http://docbook.sf.net/>
-.\"      Date: 05/31/2011
+.\"      Date: 09/15/2011
 .\"    Manual: NUT Manual
 .\"    Source: Network UPS Tools
 .\"  Language: English
 .\"
-.TH "TRIPPLITE" "8" "05/31/2011" "Network UPS Tools" "NUT Manual"
+.TH "TRIPPLITE" "8" "09/15/2011" "Network UPS Tools" "NUT Manual"
 .\" -----------------------------------------------------------------
 .\" * Define some portability stuff
 .\" -----------------------------------------------------------------