2011-03-02 14:24:22 +00:00
--- a/docs/man/bcmxcp.8
+++ b/docs/man/bcmxcp.8
@@ -103,7 +103,7 @@
.RE
.SH "TODO LIST"
.PP
-Report UPS statistics informations
+Report UPS statistics information
.RS 4
BCM/XCP supports reporting of UPS statistics data\&.
.RE
--- a/docs/man/dummy-ups.8
+++ b/docs/man/dummy-ups.8
@@ -63,7 +63,7 @@
.RE
.\}
.sp
-This file is generally named "something\&.dev"\&. It contains a list of all valid data and associated values, and has the same format as an \fBupsc\fR(8) dump (<varname>: <value>)\&. So you can easilly create definition files from an existing UPS using "upsc > file\&.dev"\&. It can also be empty, in which case only a basic set of data is available: device\&.\fB, driver\&.\fR, ups\&.mfr, ups\&.model, ups\&.status
+This file is generally named "something\&.dev"\&. It contains a list of all valid data and associated values, and has the same format as an \fBupsc\fR(8) dump (<varname>: <value>)\&. So you can easily create definition files from an existing UPS using "upsc > file\&.dev"\&. It can also be empty, in which case only a basic set of data is available: device\&.\fB, driver\&.\fR, ups\&.mfr, ups\&.model, ups\&.status
.sp
Samples definition files are available in the "data" directory of the nut source tree, and generally in the sysconfig directory of your system distribution\&.
.sp
--- a/docs/man/dummy-ups.txt
+++ b/docs/man/dummy-ups.txt
@@ -55,7 +55,7 @@
This file is generally named "something.dev". It contains a list of all
valid data and associated values, and has the same format as an linkman:upsc[8]
-dump (<varname>: <value>). So you can easilly create definition
+dump (<varname>: <value>). So you can easily create definition
files from an existing UPS using "upsc > file.dev".
It can also be empty, in which case only a basic set of data is available:
device.*, driver.*, ups.mfr, ups.model, ups.status
--- a/docs/man/metasys.8
+++ b/docs/man/metasys.8
@@ -124,7 +124,7 @@
.sp
This driver has been tested on Meta System HF Millennium 820 and ally HF 1000 only\&.
.sp
-Any informations about the use of the driver with the other listed UPS are really welcome\&.
+Any information about the use of the driver with the other listed UPS are really welcome\&.
.SH "AUTHOR"
.sp
Fabio Di Niro <blaxwan@users\&.sourceforge\&.net>
--- a/docs/man/metasys.txt
+++ b/docs/man/metasys.txt
@@ -44,7 +44,7 @@
This driver has been tested on Meta System HF Millennium 820 and
ally HF 1000 only.
-Any informations about the use of the driver with the other listed
+Any information about the use of the driver with the other listed
UPS are really welcome.
AUTHOR
--- a/drivers/apcsmart.c
+++ b/drivers/apcsmart.c
@@ -324,7 +324,7 @@
/* This should never happen since we only call
this if the REQ_CAPABILITIES command is supported
*/
- upslogx(LOG_ERR, "ERROR: APC cannot do capabilites but said it could!");
+ upslogx(LOG_ERR, "ERROR: APC cannot do capabilities but said it could!");
return;
}
--- a/drivers/dummy-ups.c
+++ b/drivers/dummy-ups.c
@@ -375,7 +375,7 @@
* enforcing controls! We also need a way to automate
* the update / sync process (with cmdvartab?!) */
- upsdebugx(1, "Unknown data. Commiting anyway...");
+ upsdebugx(1, "Unknown data. Committing anyway...");
return 1;
/* return 0;*/
}
@@ -395,7 +395,7 @@
* enforcing controls! We also need a way to automate
* the update / sync process (with cmdvartab?) */
- upsdebugx(1, "Unknown data. Commiting value anyway...");
+ upsdebugx(1, "Unknown data. Committing value anyway...");
return 1;
/* return 0;*/
}
--- a/drivers/genericups.c
+++ b/drivers/genericups.c
@@ -142,12 +142,12 @@
*/
if ((v = getval("OL")) != NULL) {
parse_input_signals(v, &upstab[upstype].line_ol, &upstab[upstype].val_ol);
- upsdebugx(2, "parse_input_signals: OL overriden with %s\n", v);
+ upsdebugx(2, "parse_input_signals: OL overridden with %s\n", v);
}
if ((v = getval("LB")) != NULL) {
parse_input_signals(v, &upstab[upstype].line_bl, &upstab[upstype].val_bl);
- upsdebugx(2, "parse_input_signals: LB overriden with %s\n", v);
+ upsdebugx(2, "parse_input_signals: LB overridden with %s\n", v);
}
}
@@ -318,12 +318,12 @@
*/
if ((v = getval("CP")) != NULL) {
parse_output_signals(v, &upstab[upstype].line_norm);
- upsdebugx(2, "parse_output_signals: CP overriden with %s\n", v);
+ upsdebugx(2, "parse_output_signals: CP overridden with %s\n", v);
}
if ((v = getval("SD")) != NULL) {
parse_output_signals(v, &upstab[upstype].line_sd);
- upsdebugx(2, "parse_output_signals: SD overriden with %s\n", v);
+ upsdebugx(2, "parse_output_signals: SD overridden with %s\n", v);
}
if (ioctl(upsfd, TIOCMSET, &upstab[upstype].line_norm)) {
--- a/drivers/metasys.c
+++ b/drivers/metasys.c
@@ -62,12 +62,12 @@
/*
Metasystem UPS data transfer are made with packet of the format:
- STX DATA_LENGHT DATA CHECKSUM
+ STX DATA_LENGTH DATA CHECKSUM
where:
STX is 0x02 and is the start of transmission byte
- DATA_LENGHT is number of data bytes + the checksum byte
+ DATA_LENGTH is number of data bytes + the checksum byte
DATA ......
- CHECKSUM is the sum modulus 256 of all DATA bytes + DATA_LENGHT
+ CHECKSUM is the sum modulus 256 of all DATA bytes + DATA_LENGTH
The answer from the UPS have the same packet format and the first
data byte is equal to the command that the ups is answering to
@@ -114,7 +114,7 @@
}
/* send a read command to the UPS, it retries 5 times before give up
- it's a 4 byte request (STX, LENGHT, COMMAND and CHECKSUM) */
+ it's a 4 byte request (STX, LENGTH, COMMAND and CHECKSUM) */
void send_read_command(char command) {
int retry, sent;
unsigned char buf[4];
@@ -122,9 +122,9 @@
sent = 0;
while ((sent != 4) && (retry < 5)) {
buf[0]=0x02; /* STX Start of Transmission */
- buf[1]=0x02; /* data lenght(data + checksum byte) */
+ buf[1]=0x02; /* data length(data + checksum byte) */
buf[2]=command; /* command to send */
- buf[3]=buf[1] + buf[2]; /* checksum (sum modulus 256 of data bytes + lenght) */
+ buf[3]=buf[1] + buf[2]; /* checksum (sum modulus 256 of data bytes + length) */
if (retry == 4) send_zeros(); /* last retry is preceded by a serial reset...*/
sent = ser_send_buf(upsfd, buf, 4);
retry += 1;
@@ -134,29 +134,29 @@
/* send a write command to the UPS, the write command and the value to be written are passed
with a char* buffer
it retries 5 times before give up */
-void send_write_command(unsigned char *command, int command_lenght) {
+void send_write_command(unsigned char *command, int command_length) {
int i, retry, sent, checksum;
unsigned char raw_buf[255];
/* prepares the raw data */
raw_buf[0] = 0x02; /* STX byte */
- raw_buf[1] = (unsigned char)(command_lenght + 1); /* data lenght + checksum */
- memcpy(raw_buf+2, command, command_lenght);
- command_lenght += 2;
+ raw_buf[1] = (unsigned char)(command_length + 1); /* data length + checksum */
+ memcpy(raw_buf+2, command, command_length);
+ command_length += 2;
/* calculate checksum */
checksum = 0;
- for (i = 1; i < command_lenght; i++) checksum += raw_buf[i];
+ for (i = 1; i < command_length; i++) checksum += raw_buf[i];
checksum = checksum % 256;
- raw_buf[command_lenght] = (unsigned char)checksum;
- command_lenght +=1;
+ raw_buf[command_length] = (unsigned char)checksum;
+ command_length +=1;
retry = 0;
sent = 0;
- while ((sent != (command_lenght)) && (retry < 5)) {
+ while ((sent != (command_length)) && (retry < 5)) {
if (retry == 4) send_zeros(); /* last retry is preceded by a serial reset... */
- sent = ser_send_buf(upsfd, raw_buf, (command_lenght));
- if (sent != (command_lenght)) printf("Error sending command %d\n", raw_buf[2]);
+ sent = ser_send_buf(upsfd, raw_buf, (command_length));
+ if (sent != (command_length)) printf("Error sending command %d\n", raw_buf[2]);
retry += 1;
}
}
@@ -164,8 +164,8 @@
/* get the answer of a command from the ups */
int get_answer(unsigned char *data) {
- unsigned char my_buf[255]; /* packet has a maximum lenght of 256 bytes */
- int packet_lenght, checksum, i, res;
+ unsigned char my_buf[255]; /* packet has a maximum length of 256 bytes */
+ int packet_length, checksum, i, res;
/* Read STX byte */
res = ser_get_char(upsfd, my_buf, 1, 0);
if (res < 1) {
@@ -176,43 +176,43 @@
ser_comm_fail("Receive error (STX): packet not on start!!\n");
return -1;
}
- /* Read data lenght byte */
+ /* Read data length byte */
res = ser_get_char(upsfd, my_buf, 1, 0);
if (res < 1) {
- ser_comm_fail("Receive error (lenght): %d!!!\n", res);
+ ser_comm_fail("Receive error (length): %d!!!\n", res);
return -1;
}
- packet_lenght = my_buf[0];
- if (packet_lenght < 2) {
- ser_comm_fail("Receive error (lenght): packet lenght %d!!!\n", packet_lenght);
+ packet_length = my_buf[0];
+ if (packet_length < 2) {
+ ser_comm_fail("Receive error (length): packet length %d!!!\n", packet_length);
return -1;
}
- /* Try to read all the remainig bytes (packet_lenght) */
- res = ser_get_buf_len(upsfd, my_buf, packet_lenght, 1, 0);
- if (res != packet_lenght) {
- ser_comm_fail("Receive error (data): got %d bytes instead of %d!!!\n", res, packet_lenght);
+ /* Try to read all the remainig bytes (packet_length) */
+ res = ser_get_buf_len(upsfd, my_buf, packet_length, 1, 0);
+ if (res != packet_length) {
+ ser_comm_fail("Receive error (data): got %d bytes instead of %d!!!\n", res, packet_length);
return -1;
}
/* now we have the whole answer from the ups, we can checksum it
- checksum byte is equal to the sum modulus 256 of all the data bytes + packet_lenght
+ checksum byte is equal to the sum modulus 256 of all the data bytes + packet_length
(no STX no checksum byte itself) */
- checksum = packet_lenght;
- for (i = 0; i < (packet_lenght - 1); i++) checksum += my_buf[i];
+ checksum = packet_length;
+ for (i = 0; i < (packet_length - 1); i++) checksum += my_buf[i];
checksum = checksum % 256;
- if (my_buf[packet_lenght-1] != checksum) {
- ser_comm_fail("checksum error! got %x instad of %x, received %d bytes \n", my_buf[packet_lenght - 1], checksum, packet_lenght);
- dump_buffer(my_buf, packet_lenght);
+ if (my_buf[packet_length-1] != checksum) {
+ ser_comm_fail("checksum error! got %x instad of %x, received %d bytes \n", my_buf[packet_length - 1], checksum, packet_length);
+ dump_buffer(my_buf, packet_length);
return -1;
}
- packet_lenght-=1; /* get rid of the checksum byte */
- memcpy(data, my_buf, packet_lenght);
- return packet_lenght;
+ packet_length-=1; /* get rid of the checksum byte */
+ memcpy(data, my_buf, packet_length);
+ return packet_length;
}
/* send a read command and try get the answer, if something fails, it retries (5 times max)
if it is on the 4th or 5th retry, it will flush the serial before sending commands
- it returns the lenght of the received answer or -1 in case of failure */
+ it returns the length of the received answer or -1 in case of failure */
int command_read_sequence(unsigned char command, unsigned char *data) {
int bytes_read = 0;
int retry = 0;
@@ -234,13 +234,13 @@
/* send a write command and try get the answer, if something fails, it retries (5 times max)
if it is on the 4th or 5th retry, it will flush the serial before sending commands
- it returns the lenght of the received answer or -1 in case of failure */
-int command_write_sequence(unsigned char *command, int command_lenght, unsigned char *answer) {
+ it returns the length of the received answer or -1 in case of failure */
+int command_write_sequence(unsigned char *command, int command_length, unsigned char *answer) {
int bytes_read = 0;
int retry = 0;
while ((bytes_read < 1) && (retry < 5)) {
- send_write_command(command, command_lenght);
+ send_write_command(command, command_length);
bytes_read = get_answer(answer);
if (retry > 2) ser_flush_in(upsfd, "", 0);
retry += 1;
--- a/drivers/snmp-ups.c
+++ b/drivers/snmp-ups.c
@@ -484,7 +484,7 @@
len = snprintf(buf, buf_len, "%ld", *pdu->variables->val.integer / 100);
break;
default:
- upslogx(LOG_ERR, "[%s] unhandled ASN 0x%x recieved from %s",
+ upslogx(LOG_ERR, "[%s] unhandled ASN 0x%x received from %s",
upsname?upsname:device_name, pdu->variables->type, OID);
return FALSE;
break;
@@ -524,7 +524,7 @@
value = *pdu->variables->val.integer / 100;
break;
default:
- upslogx(LOG_ERR, "[%s] unhandled ASN 0x%x recieved from %s",
+ upslogx(LOG_ERR, "[%s] unhandled ASN 0x%x received from %s",
upsname?upsname:device_name, pdu->variables->type, OID);
return FALSE;
break;
@@ -1459,7 +1459,7 @@
if (ret == FALSE)
upslogx(LOG_ERR, "su_setvar: cannot set value %s for %s", arg[4], arg[3]);
else
- upsdebugx(1, "su_setvar: sucessfully set %s to \"%s\"", arg[0], arg[4]);
+ upsdebugx(1, "su_setvar: successfully set %s to \"%s\"", arg[0], arg[4]);
return 1;
}
