2011-01-26 09:35:08 +00:00
|
|
|
Network UPS Tools Overview
|
|
|
|
===========================
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
Description
|
2011-01-26 09:35:08 +00:00
|
|
|
-----------
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
Network UPS Tools is a collection of programs which provide a common
|
2011-01-26 09:35:08 +00:00
|
|
|
interface for monitoring and administering UPS, PDU and SCD hardware.
|
|
|
|
It uses a layered approach to connect all of the parts.
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
Drivers are provided for a wide assortment of equipment. They
|
|
|
|
understand the specific language of each device and map it back to a
|
2011-01-26 09:35:08 +00:00
|
|
|
compatibility layer. This means both an expensive high end UPS, a simple
|
|
|
|
"power strip" PDU, or any other power device can be handled transparently with
|
|
|
|
a uniform management interface.
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
This information is cached by the network server `upsd`, which then
|
2010-03-25 23:20:59 +00:00
|
|
|
answers queries from the clients. upsd contains a number of access
|
|
|
|
control features to limit the abilities of the clients. Only authorized
|
|
|
|
hosts may monitor or control your hardware if you wish. Since the
|
|
|
|
notion of monitoring over the network is built into the software, you
|
2011-01-26 09:35:08 +00:00
|
|
|
can hang many systems off one large UPS, and they will all shut down
|
|
|
|
together. You can also use NUT to power on, off or cycle your data center
|
|
|
|
nodes, individually or globally through PDU outlets.
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
Clients such as `upsmon` check on the status of the hardware and do things
|
2010-03-25 23:20:59 +00:00
|
|
|
when necessary. The most important task is shutting down the operating
|
|
|
|
system cleanly before the UPS runs out of power. Other programs are
|
2011-01-26 09:35:08 +00:00
|
|
|
also provided to log information regularly, monitor status through your
|
2010-03-25 23:20:59 +00:00
|
|
|
web browser, and more.
|
|
|
|
|
|
|
|
|
|
|
|
Installing
|
2011-01-26 09:35:08 +00:00
|
|
|
----------
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
If you are installing these programs for the first time, go read the
|
2011-01-26 09:35:08 +00:00
|
|
|
<<_installation_instructions,installation instructions>>
|
|
|
|
to find out how to do that. This document contains more information on what all
|
|
|
|
of this stuff does.
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
|
|
|
|
Upgrading
|
2011-01-26 09:35:08 +00:00
|
|
|
---------
|
|
|
|
|
|
|
|
When upgrading from an older version, always check the
|
|
|
|
<<Upgrading_notes,upgrading notes>> to see what may have
|
|
|
|
changed. Compatibility issues and other changes will be listed there to ease
|
|
|
|
the process.
|
|
|
|
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
Configuring and using
|
|
|
|
---------------------
|
|
|
|
|
|
|
|
Once NUT is installed, refer to the
|
|
|
|
<<Configuration_notes,configuration notes>> for directions.
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
|
|
|
|
Documentation
|
2011-01-26 09:35:08 +00:00
|
|
|
-------------
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
This is just an overview of the software. You should read the man pages,
|
|
|
|
included example configuration files, and auxiliary documentation for the parts
|
|
|
|
that you intend to use.
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
|
|
|
|
Network Information
|
2011-01-26 09:35:08 +00:00
|
|
|
-------------------
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
These programs are designed to share information over the network. In
|
2011-01-26 09:35:08 +00:00
|
|
|
the examples below, `localhost` is used as the hostname. This can also
|
2010-03-25 23:20:59 +00:00
|
|
|
be an IP address or a fully qualified domain name. You can specify a
|
|
|
|
port number if your upsd process runs on another port.
|
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
In the case of the program `upsc`, to view the variables on the UPS called
|
|
|
|
sparky on the `upsd` server running on the local machine, you'd do this:
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
/usr/local/ups/bin/upsc sparky@localhost
|
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
The default port number is 3493. You can change this with
|
2010-03-25 23:20:59 +00:00
|
|
|
"configure --with-port" at compile-time. To make a client talk to upsd
|
2011-01-26 09:35:08 +00:00
|
|
|
on a specific port, add it after the hostname with a colon, like this:
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
/usr/local/ups/bin/upsc sparky@localhost:1234
|
|
|
|
|
|
|
|
This is handy when you have a mixed environment and some of the systems
|
|
|
|
are on different ports.
|
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
The general form for UPS identifiers is this:
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
<upsname>[@<hostname>[:<port>]]
|
|
|
|
|
|
|
|
Keep this in mind when viewing the examples below.
|
|
|
|
|
|
|
|
|
|
|
|
Manifest
|
2011-01-26 09:35:08 +00:00
|
|
|
--------
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
This package is broken down into several categories:
|
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
- *drivers* - These programs talk directly to your UPS hardware.
|
|
|
|
- *server* - upsd serves data from the drivers to the network.
|
|
|
|
- *clients* - They talk to upsd and do things with the status data.
|
|
|
|
- *cgi-bin* - Special class of clients that you can use with your web server.
|
|
|
|
- *scripts* - Contains various scripts, like the Perl and Python binding,
|
|
|
|
integration bits and applications.
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
Drivers
|
2011-01-26 09:35:08 +00:00
|
|
|
-------
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
These programs provide support for specific UPS models. They understand
|
|
|
|
the protocols and port specifications which define status information
|
|
|
|
and convert it to a form that upsd can understand.
|
|
|
|
|
|
|
|
To configure drivers, edit ups.conf. For this example, we'll have a UPS
|
|
|
|
called "sparky" that uses the apcsmart driver and is connected to
|
2011-01-26 09:35:08 +00:00
|
|
|
`/dev/ttyS1`. That's the second serial port on most Linux-based systems.
|
|
|
|
The entry in `ups.conf` looks like this:
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
[sparky]
|
|
|
|
driver = apcsmart
|
|
|
|
port = /dev/ttyS1
|
|
|
|
|
|
|
|
To start and stop drivers, use upsdrvctl. By default, it will start or
|
2011-01-26 09:35:08 +00:00
|
|
|
stop every UPS in the config file:
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2014-04-22 18:39:47 +00:00
|
|
|
/usr/local/ups/sbin/upsdrvctl start
|
|
|
|
/usr/local/ups/sbin/upsdrvctl stop
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
However, you can also just start or stop one by adding its name:
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2014-04-22 18:39:47 +00:00
|
|
|
/usr/local/ups/sbin/upsdrvctl start sparky
|
|
|
|
/usr/local/ups/sbin/upsdrvctl stop sparky
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
To find the driver name for your device, refer to the section below
|
2010-03-25 23:20:59 +00:00
|
|
|
called "HARDWARE SUPPORT TABLE".
|
|
|
|
|
|
|
|
Extra Settings
|
2011-01-26 09:35:08 +00:00
|
|
|
~~~~~~~~~~~~~~
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
Some drivers may require additional settings to properly communicate
|
|
|
|
with your hardware. If it doesn't detect your UPS by default, check the
|
|
|
|
driver's man page or help (-h) to see which options are available.
|
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
For example, the usbhid-ups driver allows you to use USB serial numbers to
|
2013-11-24 15:00:12 +00:00
|
|
|
distinguish between units via the "serial" configuration option. To use this
|
2011-01-26 09:35:08 +00:00
|
|
|
feature, just add another line to your ups.conf section for that UPS:
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
[sparky]
|
2011-01-26 09:35:08 +00:00
|
|
|
driver = usbhid-ups
|
|
|
|
port = auto
|
|
|
|
serial = 1234567890
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
Hardware Compatibility List
|
|
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
The <<HCL,Hardware Compatibility List>> is available in the source directory
|
|
|
|
('nut-X.Y.Z/data/driver.list'), and is generally distributed with packages.
|
2010-03-25 23:20:59 +00:00
|
|
|
For example, it is available on Debian systems as:
|
|
|
|
|
|
|
|
/usr/share/nut/driver.list
|
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
This table is also available link:http://www.networkupstools.org/stable-hcl.html[online].
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
If your driver has vanished, see the link:FAQ.html[FAQ] and
|
|
|
|
<<Upgrading_notes,Upgrading notes>>.
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
Generic Device Drivers
|
|
|
|
~~~~~~~~~~~~~~~~~~~~~~
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
NUT provides several generic drivers that support a variety of very similar models.
|
|
|
|
|
|
|
|
- The `genericups` driver supports many serial models that use the same basic
|
2010-03-25 23:20:59 +00:00
|
|
|
principle to communicate with the computer. This is known as "contact
|
|
|
|
closure", and basically involves raising or lowering signals to indicate
|
|
|
|
power status.
|
2011-01-26 09:35:08 +00:00
|
|
|
+
|
2010-03-25 23:20:59 +00:00
|
|
|
This type of UPS tends to be cheaper, and only provides the very simplest
|
|
|
|
data about power and battery status. Advanced features like battery
|
|
|
|
charge readings and such require a "smart" UPS and a driver which
|
|
|
|
supports it.
|
2011-01-26 09:35:08 +00:00
|
|
|
+
|
|
|
|
See the linkman:genericups[8] man page for more information.
|
|
|
|
|
|
|
|
- The `usbhid-ups` driver attempts to communicate with USB HID Power Device
|
|
|
|
Class (PDC) UPSes. These units generally implement the same basic protocol,
|
|
|
|
with minor variations in the exact set of supported attributes. This driver
|
|
|
|
also applies several correction factors when the UPS firmware reports values
|
|
|
|
with incorrect scale factors.
|
|
|
|
+
|
|
|
|
See the linkman:usbhid-ups[8] man page for more information.
|
|
|
|
|
|
|
|
- The `blazer_ser` and `blazer_usb` drivers supports the Megatec / Q1
|
|
|
|
protocol that is used in many brands (Blazer, Energy Sistem, Fenton
|
|
|
|
Technologies, Mustek and many others).
|
|
|
|
+
|
|
|
|
See the linkman:blazer[8] man page for more information.
|
|
|
|
|
|
|
|
- The `snmp-ups` driver handles various SNMP enabled devices, from many
|
|
|
|
different manufacturers. In SNMP terms, `snmp-ups` is a manager, that
|
|
|
|
monitors SNMP agents.
|
|
|
|
+
|
|
|
|
See the linkman:snmp-ups[8] man page for more information.
|
|
|
|
|
|
|
|
- The `powerman-pdu` is a bridge to the PowerMan daemon, thus handling all
|
|
|
|
PowerMan supported devices. The PowerMan project supports several serial
|
|
|
|
and networked PDU, along with Blade and IPMI enabled servers.
|
|
|
|
+
|
|
|
|
See the linkman:powerman-pdu[8] man page for more
|
|
|
|
information.
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2013-11-24 15:00:12 +00:00
|
|
|
- The `apcupsd-ups` driver is a bridge to the Apcupsd daemon, thus handling
|
|
|
|
all Apcupsd supported devices. The Apcupsd project supports many serial,
|
|
|
|
USB and networked APC UPS.
|
|
|
|
+
|
|
|
|
See the linkman:apcupsd-ups[8] man page for more information.
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
UPS Shutdowns
|
2011-01-26 09:35:08 +00:00
|
|
|
~~~~~~~~~~~~~
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
upsdrvctl can also shut down (power down) all of your UPS hardware.
|
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
WARNING: if you play around with this command, expect your filesystems
|
|
|
|
to die. Don't power off your computers unless they're ready for it:
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2014-04-22 18:39:47 +00:00
|
|
|
/usr/local/ups/sbin/upsdrvctl shutdown
|
|
|
|
/usr/local/ups/sbin/upsdrvctl shutdown sparky
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
You should read the <<UPS_shutdown,Configuring automatic UPS shutdowns>>
|
|
|
|
chapter to learn more about when to use this feature. If called at the wrong
|
|
|
|
time, you may cause data loss by turning off a system with a filesystem
|
2010-03-25 23:20:59 +00:00
|
|
|
mounted read-write.
|
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
Power distribution unit management
|
|
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
|
|
|
|
NUT also provides an advanced support for power distribution units.
|
|
|
|
|
|
|
|
You should read the <<Outlets_PDU_notes,Configuring automatic UPS shutdowns>>
|
|
|
|
chapter to learn more about when to use this feature.
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
Network Server
|
2011-01-26 09:35:08 +00:00
|
|
|
--------------
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
`upsd` is responsible for passing data from the drivers to the client
|
|
|
|
programs via the network. It should be run immediately after `upsdrvctl`
|
2010-03-25 23:20:59 +00:00
|
|
|
in your system's startup scripts.
|
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
`upsd` should be kept running whenever possible, as it is the only source
|
|
|
|
of status information for the monitoring clients like `upsmon`.
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
Monitoring client
|
|
|
|
-----------------
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
`upsmon` provides the essential feature that you expect to find in UPS
|
2010-03-25 23:20:59 +00:00
|
|
|
monitoring software: safe shutdowns when the power fails.
|
|
|
|
|
|
|
|
In the layered scheme of NUT software, it is a client. It has this
|
|
|
|
separate section in the documentation since it is so important.
|
|
|
|
|
|
|
|
You configure it by telling it about UPSes that you want to monitor in
|
2011-01-26 09:35:08 +00:00
|
|
|
upsmon.conf. Each UPS can be defined as one of two possible types:
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
Master
|
|
|
|
~~~~~~
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
This UPS supplies power to the system running `upsmon`, and this system is also
|
|
|
|
responsible for shutting it down when the battery is depleted. This occurs
|
|
|
|
after any slave systems have disconnected safely.
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
If your UPS is plugged directly into a system's serial port, the `upsmon`
|
|
|
|
process on that system should define that UPS as a master.
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
For a typical home user, there's one computer connected to one UPS.
|
|
|
|
That means you run a driver, `upsd`, and `upsmon` in master mode.
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
Slave
|
|
|
|
~~~~~
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
This UPS may supply power to the system running `upsmon`, but this system can't
|
|
|
|
shut it down directly.
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
Use this mode when you run multiple computers on the same UPS. Obviously, only
|
|
|
|
one can be connected to the serial port on the UPS, and that system is the
|
|
|
|
master. Everything else is a slave.
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
For a typical home user, there's one computer connected to one UPS.
|
|
|
|
That means you run a driver, upsd, and upsmon in master mode.
|
|
|
|
|
|
|
|
Additional Information
|
2011-01-26 09:35:08 +00:00
|
|
|
~~~~~~~~~~~~~~~~~~~~~~
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
More information on configuring upsmon can be found in these places:
|
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
- The linkman:upsmon[8] man page
|
|
|
|
- <<BigServers,Typical setups for big servers>>
|
|
|
|
- <<UPS_shutdown,Configuring automatic UPS shutdowns>> chapter
|
|
|
|
- The stock `upsmon.conf` that comes with the package
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
|
|
|
|
Clients
|
2011-01-26 09:35:08 +00:00
|
|
|
-------
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
Clients talk to upsd over the network and do useful things with the data
|
|
|
|
from the drivers. There are tools for command line access, and a few
|
|
|
|
special clients which can be run through your web server as CGI
|
|
|
|
programs.
|
|
|
|
|
|
|
|
For more details on specific programs, refer to their man pages.
|
|
|
|
|
|
|
|
upsc
|
2011-01-26 09:35:08 +00:00
|
|
|
~~~~
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
`upsc` is a simple client that will display the values of variables known
|
|
|
|
to `upsd` and your UPS drivers. It will list every variable by default,
|
|
|
|
or just one if you specify an additional argument. This can be useful
|
|
|
|
in shell scripts for monitoring something without writing your own
|
2010-03-25 23:20:59 +00:00
|
|
|
network code.
|
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
`upsc` is a quick way to find out if your driver(s) and upsd are working
|
|
|
|
together properly. Just run `upsc <ups>` to see what's going on, i.e.:
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
morbo:~$ upsc sparky@localhost
|
2010-03-25 23:20:59 +00:00
|
|
|
ambient.humidity: 035.6
|
|
|
|
ambient.humidity.alarm.maximum: NO,NO
|
|
|
|
ambient.humidity.alarm.minimum: NO,NO
|
|
|
|
ambient.temperature: 25.14
|
2011-01-26 09:35:08 +00:00
|
|
|
...
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
If you are interested in writing a simple client that monitors `upsd`,
|
|
|
|
the source code for `upsc` is a good way to learn about using the
|
2010-03-25 23:20:59 +00:00
|
|
|
upsclient functions.
|
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
See the linkman:upsc[8] man page and
|
|
|
|
<<nut-names,NUT command and variable naming scheme>> for more information.
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
upslog
|
2011-01-26 09:35:08 +00:00
|
|
|
~~~~~~
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
`upslog` will write status information from `upsd` to a file at set
|
2010-03-25 23:20:59 +00:00
|
|
|
intervals. You can use this to generate graphs or reports with other
|
2011-01-26 09:35:08 +00:00
|
|
|
programs such as `gnuplot`.
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
upsrw
|
2011-01-26 09:35:08 +00:00
|
|
|
~~~~~
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
`upsrw` allows you to display and change the read/write variables in your
|
2010-03-25 23:20:59 +00:00
|
|
|
UPS hardware. Not all devices or drivers implement this, so this may
|
2011-01-26 09:35:08 +00:00
|
|
|
not have any effect on your system.
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
A driver that supports read/write variables will give results like this:
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
$ upsrw sparky@localhost
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
( many skipped )
|
|
|
|
|
|
|
|
[ups.test.interval]
|
|
|
|
Interval between self tests
|
|
|
|
Type: ENUM
|
|
|
|
Option: "1209600"
|
|
|
|
Option: "604800" SELECTED
|
|
|
|
Option: "0"
|
|
|
|
|
|
|
|
( more skipped )
|
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
On the other hand, one that doesn't support them won't print anything:
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
$ upsrw fenton@gearbox
|
|
|
|
|
|
|
|
( nothing )
|
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
`upsrw` requires administrator powers to change settings in the hardware.
|
|
|
|
Refer to linkman:upsd.users[5] for information on defining
|
|
|
|
users in `upsd`.
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
upscmd
|
2011-01-26 09:35:08 +00:00
|
|
|
~~~~~~
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
Some UPS hardware and drivers support the notion of an instant command -
|
|
|
|
a feature such as starting a battery test, or powering off the load.
|
|
|
|
You can use upscmd to list or invoke instant commands if your
|
|
|
|
hardware/drivers support them.
|
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
Use the -l command to list them, like this:
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
$ upscmd -l sparky@localhost
|
|
|
|
Instant commands supported on UPS [sparky@localhost]:
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
load.on - Turn on the load immediately
|
|
|
|
test.panel.start - Start testing the UPS panel
|
|
|
|
calibrate.start - Start run time calibration
|
|
|
|
calibrate.stop - Stop run time calibration
|
2011-01-26 09:35:08 +00:00
|
|
|
...
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
`upscmd` requires administrator powers to start instant commands.
|
|
|
|
To define users and passwords in `upsd`, see
|
|
|
|
linkman:upsd.users[5].
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
|
|
|
|
CGI Programs
|
2011-01-26 09:35:08 +00:00
|
|
|
------------
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
The CGI programs are clients that run through your web server. They
|
|
|
|
allow you to see UPS status and perform certain administrative commands
|
|
|
|
from any web browser. Javascript and cookies are not required.
|
|
|
|
|
|
|
|
These programs are not installed or compiled by default. To compile
|
2011-01-26 09:35:08 +00:00
|
|
|
and install them, first run `configure --with-cgi`, then do `make` and
|
|
|
|
`make install`. If you receive errors about "gd" during configure, go
|
2010-03-25 23:20:59 +00:00
|
|
|
get it and install it before continuing.
|
|
|
|
|
|
|
|
You can get the source here:
|
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
http://www.libgd.org/
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
In the event that you need libpng or zlib in order to compile gd,
|
2010-03-25 23:20:59 +00:00
|
|
|
they can be found at these URLs:
|
|
|
|
|
|
|
|
http://www.libpng.org/pub/png/pngcode.html
|
|
|
|
|
|
|
|
http://www.gzip.org/zlib/
|
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
|
2010-03-25 23:20:59 +00:00
|
|
|
Access Restrictions
|
2011-01-26 09:35:08 +00:00
|
|
|
~~~~~~~~~~~~~~~~~~~
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
The CGI programs use hosts.conf to see if they are allowed to talk to a
|
|
|
|
host. This keeps malicious visitors from creating queries from your web
|
|
|
|
server to random hosts on the Internet.
|
|
|
|
|
|
|
|
If you get error messages that say "Access to that host is not
|
|
|
|
authorized", you're probably missing an entry in your hosts.conf.
|
|
|
|
|
|
|
|
upsstats
|
2011-01-26 09:35:08 +00:00
|
|
|
~~~~~~~~
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
`upsstats` generates web pages from HTML templates, and plugs in status
|
2010-03-25 23:20:59 +00:00
|
|
|
information in the right places. It looks like a distant relative of
|
|
|
|
APC's old Powerchute interface. You can use it to monitor several
|
|
|
|
systems or just focus on one.
|
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
It also can generate IMG references to `upsimage`.
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
upsimage
|
2011-01-26 09:35:08 +00:00
|
|
|
~~~~~~~~
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
This is usually called by upsstats via IMG SRC tags to draw either the
|
|
|
|
utility or outgoing voltage, battery charge percent, or load percent.
|
|
|
|
|
|
|
|
upsset
|
2011-01-26 09:35:08 +00:00
|
|
|
~~~~~~
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
`upsset` provides several useful administration functions through a web
|
|
|
|
interface. You can use `upsset` to kick off instant commands on your UPS
|
2010-03-25 23:20:59 +00:00
|
|
|
hardware like running a battery test. You can also use it to change
|
|
|
|
variables in your UPS that accept user-specified values.
|
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
Essentially, `upsset` provides the functions of `upsrw` and `upscmd`, but
|
2010-03-25 23:20:59 +00:00
|
|
|
with a happy pointy-clicky interface.
|
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
`upsset` will not run until you convince it that you have secured your
|
2010-03-25 23:20:59 +00:00
|
|
|
system. You *must* secure your CGI path so that random interlopers
|
2011-01-26 09:35:08 +00:00
|
|
|
can't run this program remotely. See the `upsset.conf` file. Once you
|
2010-03-25 23:20:59 +00:00
|
|
|
have secured the directory, you can enable this program in that
|
|
|
|
configuration file. It is not active by default.
|
|
|
|
|
|
|
|
|
|
|
|
Version Numbering
|
2011-01-26 09:35:08 +00:00
|
|
|
-----------------
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
The version numbers work like this: if the middle number is odd, it's a
|
|
|
|
development tree, otherwise it is the stable tree.
|
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
The past stable trees were 1.0, 1.2, 1.4, 2.0, 2.2 and 2.4, with the
|
|
|
|
latest stable tree designated 2.6. The development trees were 1.1, 1.3,
|
|
|
|
1.5, 2.1 and 2.3. As of the 2.4 release, there is no real development
|
|
|
|
branch anymore since the code is available through a revision control
|
|
|
|
system (namely Subversion) and snapshots.
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
Major release jumps are mostly due to large changes to the features
|
|
|
|
list. There have also been a number of architectural changes which
|
|
|
|
may not be noticeable to most users, but which can impact developers.
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
|
|
|
|
Backwards and Forwards Compatibility
|
2011-01-26 09:35:08 +00:00
|
|
|
------------------------------------
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
The old network code spans a range from about 0.41.1 when TCP support
|
|
|
|
was introduced up to the recent 1.4 series. It used variable names
|
|
|
|
like STATUS, UTILITY, and LOADPCT. Many of these names go back to the
|
|
|
|
earliest prototypes of this software from 1997. At that point there
|
|
|
|
was no way to know that so many drivers would come along and introduce
|
|
|
|
so many new variables and commands. The resulting mess grew out of
|
|
|
|
control over the years.
|
|
|
|
|
|
|
|
During the 1.3 development cycle, all variables and instant commands
|
|
|
|
were renamed to fit into a tree-like structure. There are major groups,
|
|
|
|
like input, output and battery. Members of those groups have been
|
|
|
|
arranged to make sense - input.voltage and output.voltage compliment
|
|
|
|
each other. The old names were UTILITY and OUTVOLT. The benefits in
|
|
|
|
this change are obvious.
|
|
|
|
|
|
|
|
The 1.4 clients can talk to either type of server, and can handle either
|
|
|
|
naming scheme. 1.4 servers have a compatibility mode where they can
|
|
|
|
answer queries for both names, even though the drivers are internally
|
|
|
|
using the new format.
|
|
|
|
|
|
|
|
When 1.4 clients talk to 1.4 or 2.0 (or more recent) servers, they will
|
|
|
|
use the new names.
|
|
|
|
|
|
|
|
Here's a table to make it easier to visualize:
|
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
[options="header"]
|
|
|
|
|=============================================
|
|
|
|
| 4+| Server version
|
|
|
|
| *Client version* | 1.0 | 1.2 | 1.4 | 2.0+
|
|
|
|
| 1.0 | yes | yes | yes | no
|
|
|
|
| 1.2 | yes | yes | yes | no
|
|
|
|
| 1.4 | yes | yes | yes | yes
|
|
|
|
| 2.0+ | no | no | yes | yes
|
|
|
|
|=============================================
|
|
|
|
|
|
|
|
Version 2.0, and more recent, do not contain backwards compatibility for
|
2010-03-25 23:20:59 +00:00
|
|
|
the old protocol and variable/command names. As a result, 2.0 clients can't
|
|
|
|
talk to anything older than a 1.4 server. If you ask a 2.0 client to
|
|
|
|
fetch "STATUS", it will fail. You'll have to ask for "ups.status"
|
|
|
|
instead.
|
|
|
|
|
|
|
|
Authors of separate monitoring programs should have used the 1.4 series
|
|
|
|
to write support for the new variables and command names. Client
|
|
|
|
software can easily support both versions as long as they like. If upsd
|
|
|
|
returns 'ERR UNKNOWN-COMMAND' to a GET request, you need to use REQ.
|
|
|
|
|
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
Support / Help / etc.
|
|
|
|
---------------------
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
If you are in need of help, refer to the
|
|
|
|
<<Support_Request,Support instructions>> in the user manual.
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
Hacking / Development Info
|
|
|
|
--------------------------
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
Additional documentation can be found in:
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
- the linkdoc:developer-guide[Developer Guide],
|
|
|
|
- the linkdoc:packager-guide[Packager Guide].
|
2010-03-25 23:20:59 +00:00
|
|
|
|
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
Acknowledgements / Contributions
|
|
|
|
--------------------------------
|
2010-03-25 23:20:59 +00:00
|
|
|
|
2011-01-26 09:35:08 +00:00
|
|
|
The many people who have participated in creating and improving NUT are
|
|
|
|
listed in the user manual <<Acknowledgements,acknowledgements appendix>>.
|