159 lines
5.3 KiB
Groff
159 lines
5.3 KiB
Groff
|
.TH UPSD 8 "Mon Nov 30 2009" "" "Network UPS Tools (NUT)"
|
||
|
|
.SH NAME
|
||
|
|
upsd \- UPS information server
|
||
|
|
.SH SYNOPSIS
|
||
|
|
.B upsd \-h
|
||
|
|
|
||
|
|
.B upsd [OPTIONS]
|
||
|
|
|
||
|
|
.SH DESCRIPTION
|
||
|
|
|
||
|
|
.B upsd
|
||
|
|
is responsible for serving the data from the drivers to the clients. It
|
||
|
|
connects to each driver and maintains a local cache of the current
|
||
|
|
state. Queries from the clients are served from this cache, so delays
|
||
|
|
are minimal.
|
||
|
|
|
||
|
|
It also conveys administrative messages from the clients such as
|
||
|
|
starting tests or setting values back to the drivers.
|
||
|
|
|
||
|
|
This program is essential, and must be running at all times to actually
|
||
|
|
make any use out of the drivers and clients.
|
||
|
|
|
||
|
|
Controls in the configuration files allow you to limit access to the
|
||
|
|
server, but you should also use a firewall for extra protection. Client
|
||
|
|
processes such as \fBupsmon\fR(8) trust upsd for status information about
|
||
|
|
the UPS hardware, so keep it secure.
|
||
|
|
|
||
|
|
.SH OPTIONS
|
||
|
|
|
||
|
|
.IP "\-c \fIcommand\fR"
|
||
|
|
Send \fIcommand\fR to the background process as a signal. Valid commands
|
||
|
|
are:
|
||
|
|
.IP
|
||
|
|
.nf
|
||
|
|
reload \(hy reread configuration files
|
||
|
|
stop \(hy stop process and exit
|
||
|
|
.fi
|
||
|
|
.LP
|
||
|
|
|
||
|
|
.IP "\-D"
|
||
|
|
Raise the debug level. Use this multiple times for additional details.
|
||
|
|
|
||
|
|
.IP "\-h"
|
||
|
|
Display the help text.
|
||
|
|
|
||
|
|
.IP "\-r \fIdirectory\fR"
|
||
|
|
upsd will \fBchroot\fR(2) to \fIdirectory\fR shortly after startup
|
||
|
|
and before parsing any configuration files with this option set. You
|
||
|
|
can use this to create a "jail" for greater security.
|
||
|
|
|
||
|
|
You must coordinate this with your drivers, as upsd must be able to find
|
||
|
|
the state path within \fIdirectory\fR. See \fBupsdrvctl\fR(8) and
|
||
|
|
\fBnutupsdrv\fR(8).
|
||
|
|
|
||
|
|
.IP "\-u \fIuser\fR"
|
||
|
|
Switch to user \fIuser\fR after startup if started as root. This
|
||
|
|
overrides whatever you may have compiled in with 'configure
|
||
|
|
\-\-with\-user'.
|
||
|
|
|
||
|
|
.IP "\-V"
|
||
|
|
Display the version of the program.
|
||
|
|
|
||
|
|
.SH RELOADING
|
||
|
|
|
||
|
|
upsd can reload its configuration files without shutting down the process
|
||
|
|
if you send it a SIGHUP or start it again with '\-c reload'. This only works
|
||
|
|
if the background process is able to read those files.
|
||
|
|
|
||
|
|
If you think that upsd can't reload, check your syslogs for error messages.
|
||
|
|
If it's complaining about not being able to read the files, then you need
|
||
|
|
to adjust your system to make it possible. Either change the permissions
|
||
|
|
on the files, or run upsd as another user that will be able to read them.
|
||
|
|
|
||
|
|
DO NOT make your upsd.conf or upsd.users world\(hyreadable, as those files
|
||
|
|
hold important authentication information. In the wrong hands, it could
|
||
|
|
be used by some evil person to spoof your master upsmon and command your
|
||
|
|
systems to shut down.
|
||
|
|
|
||
|
|
.SH DIAGNOSTICS
|
||
|
|
|
||
|
|
upsd expects the drivers to either update their status regularly or at
|
||
|
|
least answer periodic queries, called pings. If a driver doesn't
|
||
|
|
answer, upsd will declare it "stale" and no more information will be
|
||
|
|
provided to the clients.
|
||
|
|
|
||
|
|
If upsd complains about staleness when you start it, then either your
|
||
|
|
driver or configuration files are probably broken. Be sure that the
|
||
|
|
driver is actually running, and that the UPS definition in
|
||
|
|
\fBups.conf\fR(5) is correct. Also make sure that you start your
|
||
|
|
driver(s) before starting upsd.
|
||
|
|
|
||
|
|
Data can also be marked stale if the driver can no longer communicate
|
||
|
|
with the UPS. In this case, the driver should also provide diagnostic
|
||
|
|
information in the syslog. If this happens, check the serial or
|
||
|
|
USB cabling, or inspect the network path in the case of a SNMP UPS.
|
||
|
|
|
||
|
|
.SH ACCESS CONTROL
|
||
|
|
|
||
|
|
If the server is build with tcp-wrappers support enabled, it will check if
|
||
|
|
the NUT username is allowed to connect from the client address through the
|
||
|
|
\fB/etc/hosts.allow\fR and \fB/etc/hosts.deny\fR files. Note that this will
|
||
|
|
only be done for commands that require to be logged into the server.
|
||
|
|
|
||
|
|
.IP
|
||
|
|
.nf
|
||
|
|
hosts.allow:
|
||
|
|
------------
|
||
|
|
upsd : admin@127.0.0.1/32
|
||
|
|
upsd : monslave@127.0.0.1/32 monslave@192.168.1.0/24
|
||
|
|
|
||
|
|
hosts.deny:
|
||
|
|
-----------
|
||
|
|
upsd : ALL
|
||
|
|
.fi
|
||
|
|
.LP
|
||
|
|
|
||
|
|
Further details are described in \fBhosts_access\fR(5).
|
||
|
|
|
||
|
|
.SH FILES
|
||
|
|
|
||
|
|
The general upsd configuration file is \fBupsd.conf\fR(5). The
|
||
|
|
administrative functions like SET and INSTCMD for users are defined and
|
||
|
|
controlled in \fBupsd.users\fR(5). UPS definitions are found in
|
||
|
|
\fBups.conf\fR(5).
|
||
|
|
|
||
|
|
.SH ENVIRONMENT VARIABLES
|
||
|
|
|
||
|
|
\fBNUT_CONFPATH\fR is the path name of the directory that contains
|
||
|
|
\fBupsd.conf\fR and other configuration files. If this variable is not set,
|
||
|
|
\fBupsd\fR uses a built\(hyin default, which is often \fB/usr/local/ups/etc\fR.
|
||
|
|
|
||
|
|
\fBNUT_STATEPATH\fR is the path name of the directory in which
|
||
|
|
\fBupsd\fR keeps state information. If this variable is not set,
|
||
|
|
\fBupsd\fR uses a built\(hyin default, which is often \fB/var/state/ups\fR.
|
||
|
|
The \fBSTATEPATH\fR directive in \fBupsd.conf\fR overrides this variable.
|
||
|
|
|
||
|
|
.SH SEE ALSO
|
||
|
|
|
||
|
|
.SS Clients:
|
||
|
|
\fBupsc\fR(8), \fBupscmd\fR(8),
|
||
|
|
\fBupsrw\fR(8), \fBupslog\fR(8), \fBupsmon\fR(8)
|
||
|
|
|
||
|
|
.SS CGI programs:
|
||
|
|
\fBupsset.cgi\fR(8), \fBupsstats.cgi\fR(8), \fBupsimage.cgi\fR(8)
|
||
|
|
|
||
|
|
.SS Drivers:
|
||
|
|
\fBnutupsdrv\fR(8),
|
||
|
|
\fBapcsmart\fR(8), \fBbelkin\fR(8), \fBbelkinunv\fR(8),
|
||
|
|
\fBbestuferrups\fR(8), \fBbestups\fR(8),
|
||
|
|
\fBcyberpower\fR(8), \fBenergizerups\fR(8), \fBetapro\fR(8),
|
||
|
|
\fBeverups\fR(8), \fBgenericups\fR(8),
|
||
|
|
\fBisbmex\fR(8), \fBliebert\fR(8), \fBmasterguard\fR(8),
|
||
|
|
\fBmge\(hyshut\fR(8), \fBmge\(hyutalk\fR(8), \fBoneac\fR(8),
|
||
|
|
\fBpowercom\fR(8), \fBsafenet\fR(8), \fBsnmp\-ups\fR(8),
|
||
|
|
\fBtripplite\fR(8), \fBtripplitesu\fR(8), \fBvictronups\fR(8),
|
||
|
|
|
||
|
|
.SS Internet resources:
|
||
|
|
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
|