94 lines
2.9 KiB
Text
94 lines
2.9 KiB
Text
|
netxml-ups(8)
|
||
|
|
=============
|
||
|
|
|
||
|
|
NAME
|
||
|
|
----
|
||
|
|
netxml-ups - Driver for Eaton / MGE Network Management Card / Proxy
|
||
|
|
(XML/HTTP Protocol) equipment
|
||
|
|
|
||
|
|
NOTE
|
||
|
|
----
|
||
|
|
This man page only documents the hardware-specific features of the
|
||
|
|
netxml-ups driver. For information about the core driver, see
|
||
|
|
linkman:nutupsdrv[8].
|
||
|
|
|
||
|
|
SUPPORTED HARDWARE
|
||
|
|
------------------
|
||
|
|
netxml-ups support all recent Eaton / MGE models which use a Network
|
||
|
|
Management Card or Proxy (MGE XML/HTTP protocol based). This applies to both
|
||
|
|
Eaton (previously MGE Office Protection Systems) and to MGE UPS SYSTEMS.
|
||
|
|
Supported card and proxy models are:
|
||
|
|
|
||
|
|
* NMC Minislot (Ref 66102, firmware EA or newer),
|
||
|
|
* SNMP/Web Minislot card (Ref 66244)
|
||
|
|
* NMC Transverse (Ref 66074),
|
||
|
|
* NMC & Modbus/JBus (Ref 66103),
|
||
|
|
* Network Management Proxy,
|
||
|
|
* ePDU Monitored (newer version).
|
||
|
|
|
||
|
|
Older models, such as SNMP card (Ref 66062 and Ref 66045), use the SNMP
|
||
|
|
protocol and should use the linkman:snmp-ups[8] driver with the "mibs=mge"
|
||
|
|
parameter.
|
||
|
|
|
||
|
|
EXTRA ARGUMENTS
|
||
|
|
---------------
|
||
|
|
This driver supports the following optional settings in the
|
||
|
|
linkman:ups.conf[5]:
|
||
|
|
|
||
|
|
*timeout*='value'::
|
||
|
|
The timeout for connecting to and reading from the UPS. Defaults to 5 seconds.
|
||
|
|
Don't change this value unless you know exactly what you're doing.
|
||
|
|
|
||
|
|
This value *must never* be higher than half the MAXAGE value specified in
|
||
|
|
linkman:upsd.conf[5], otherwise you run the risk that linkman:upsd[8] declares
|
||
|
|
the driver stale while it is waiting for a connection to timeout.
|
||
|
|
|
||
|
|
*login*='value'::
|
||
|
|
Set the login value for authenticated mode. This feature also needs the
|
||
|
|
*password* argument, and allows value settings in the card.
|
||
|
|
This feature is not used yet.
|
||
|
|
|
||
|
|
*password*='value'::
|
||
|
|
Set the password value, needed with the login for authenticated mode.
|
||
|
|
This feature is not used yet.
|
||
|
|
|
||
|
|
IMPLEMENTATION
|
||
|
|
--------------
|
||
|
|
The hostname of the UPS is specified with the "port" value in
|
||
|
|
*ups.conf*, i.e.:
|
||
|
|
|
||
|
|
[mgexml]
|
||
|
|
driver = netxml-ups
|
||
|
|
port = http://netxml-ups.example.com:80
|
||
|
|
|
||
|
|
Specifying the method to connect to the UPS (http, https) is mandatory.
|
||
|
|
If the port is equal to the default for the method specified (80 for http,
|
||
|
|
443 for https) it may be omitted.
|
||
|
|
|
||
|
|
In order not to overload older NMCs by polling them too frequently, it is
|
||
|
|
recommended to increase the "pollinterval" (see linkman:nutupsdrv[8]) and
|
||
|
|
linkman:ups.conf[5]) to at least 5 seconds.
|
||
|
|
|
||
|
|
KNOWN ISSUES
|
||
|
|
------------
|
||
|
|
Don't connect to the UPS through a proxy. Although it would be trivial to add
|
||
|
|
support for proxies, this is not recommended and don't ask for it. Not only
|
||
|
|
because it will prevent the driver to make a persistent connection to the UPS,
|
||
|
|
but also it adds an additional failure mode. If the proxy goes down (for
|
||
|
|
whatever reason), the driver will no longer be able to reach the UPS.
|
||
|
|
|
||
|
|
AUTHORS
|
||
|
|
-------
|
||
|
|
Arjen de Korte <adkorte-guest@alioth.debian.org>
|
||
|
|
|
||
|
|
SEE ALSO
|
||
|
|
--------
|
||
|
|
|
||
|
|
The core driver:
|
||
|
|
~~~~~~~~~~~~~~~~
|
||
|
|
linkman:nutupsdrv[8]
|
||
|
|
|
||
|
|
Internet resources:
|
||
|
|
~~~~~~~~~~~~~~~~~~~
|
||
|
|
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
|