102 lines
2.5 KiB
Text
102 lines
2.5 KiB
Text
|
SAFENET(8)
|
||
|
|
==========
|
||
|
|
|
||
|
|
NAME
|
||
|
|
----
|
||
|
|
safenet - Driver for SafeNet compatible UPS equipment
|
||
|
|
|
||
|
|
NOTE
|
||
|
|
----
|
||
|
|
This man page only documents the hardware-specific features of the
|
||
|
|
safenet driver. For information about the core driver, see
|
||
|
|
linkman:nutupsdrv[8].
|
||
|
|
|
||
|
|
SUPPORTED HARDWARE
|
||
|
|
------------------
|
||
|
|
This driver supports UPS equipment which can be controlled via
|
||
|
|
SafeNet v1.0 for Windows (serial interface only).
|
||
|
|
|
||
|
|
EXTRA ARGUMENTS
|
||
|
|
---------------
|
||
|
|
This driver supports the following optional settings in the
|
||
|
|
linkman:ups.conf[5] file:
|
||
|
|
|
||
|
|
*manufacturer=*'value'::
|
||
|
|
Autodetection of this parameter is not possible yet (and it probably
|
||
|
|
never will be). Therefore, this user-defined string accepts any name. The
|
||
|
|
default is 'unknown'.
|
||
|
|
|
||
|
|
*modelname=*'value'::
|
||
|
|
Like manufacturer above. The default is 'unknown'.
|
||
|
|
|
||
|
|
*serialnumber=*'value'::
|
||
|
|
Like manufacturer above. The default is 'unknown'.
|
||
|
|
|
||
|
|
*ondelay=*'value'::
|
||
|
|
Time to wait before switching on the UPS (minutes). Defaults to 1 minute.
|
||
|
|
|
||
|
|
*offdelay=*'value'::
|
||
|
|
Time to wait before shutting down the UPS (seconds). Defaults to 30 seconds.
|
||
|
|
|
||
|
|
UPSCMD
|
||
|
|
------
|
||
|
|
This driver supports some instant commands (see linkman:upscmd[8]):
|
||
|
|
|
||
|
|
*test.battery.start*::
|
||
|
|
Start UPS self test
|
||
|
|
|
||
|
|
*test.battery.stop*::
|
||
|
|
Cancel UPS self test
|
||
|
|
|
||
|
|
*test.failure.start*::
|
||
|
|
Start simulated power failure
|
||
|
|
|
||
|
|
*test.failure.stop*::
|
||
|
|
Cancel simulated power failure
|
||
|
|
|
||
|
|
*beeper.enable*::
|
||
|
|
Enable the UPS beeper
|
||
|
|
|
||
|
|
*beeper.mute*::
|
||
|
|
Temporarily mute the UPS beeper
|
||
|
|
|
||
|
|
*beeper.toggle*::
|
||
|
|
Toggle the UPS beeper
|
||
|
|
|
||
|
|
*shutdown.return*::
|
||
|
|
Turn off the load and wait for the power to return. Uses the timer
|
||
|
|
defined by *offdelay*.
|
||
|
|
|
||
|
|
*shutdown.reboot*::
|
||
|
|
Turn off the load and return. Uses the timers defined by *offdelay*
|
||
|
|
and *ondelay*.
|
||
|
|
|
||
|
|
KNOWN PROBLEMS
|
||
|
|
--------------
|
||
|
|
If you run the *shutdown.return* command with mains present, the output
|
||
|
|
may stay on or switch off and not back on again. The *shutdown.reboot*
|
||
|
|
command will unconditionally switch on the load again (with or without mains
|
||
|
|
present).
|
||
|
|
|
||
|
|
If the driver is called with the '-k' option (or through *upsdrvctl
|
||
|
|
shutdown*) it tries to detect which command should be used in an attempt
|
||
|
|
to stay off until mains is present again or to cycle the output if the
|
||
|
|
power returned in the mean time. This isn't bullet-proof, and you should be
|
||
|
|
prepared that the power will either not be shutdown, or that it doesn't
|
||
|
|
return when the power comes back.
|
||
|
|
|
||
|
|
AUTHOR
|
||
|
|
------
|
||
|
|
Arjen de Korte <adkorte-guest at alioth.debian.org>
|
||
|
|
|
||
|
|
SEE ALSO
|
||
|
|
--------
|
||
|
|
|
||
|
|
The core driver:
|
||
|
|
~~~~~~~~~~~~~~~~
|
||
|
|
linkman:nutupsdrv[8]
|
||
|
|
|
||
|
|
Internet resources:
|
||
|
|
~~~~~~~~~~~~~~~~~~~
|
||
|
|
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
|