ifupdown-ng/doc/interfaces-bridge.scd
Maximilian Wilhelm 05711db6ce doc: Add a man page for bridge interfaces
Signed-off-by: Maximilian Wilhelm <max@sdn.clinic>
2020-10-06 03:56:09 +02:00

87 lines
2 KiB
Markdown

interfaces-bridge(5)
# NAME
*interfaces-bridge* - Bridge extensions for the interfaces(5) file format
# DESCRIPTION
Linux has support for Ethernet bridging interfaces which act like an
Ethernet switch within the Linux Kernel. The following options allow
to set up Ethernet bridges and adding configured interfaces to bridges.
See *ip-link*(8) for more details about the options listed below.
# BRIDGE-RELATED OPTIONS
*bridge-ports* _list of interfaces_
A space separated list of interfaces which should be configured
as member interfaces of this bridge. This option must be set
for the bridge to be configured.
*bridge-hw* _MAC address_
Denotes the _MAC address_ the bridge should use.
*bridge-ageing* _seconds_
Denotes the time in seconds after which a MAC address will be
removed from the Forwarding DataBase (FDB) after not having
seen a frame with this source address.
# SPANNING TREE RELATED BRIDGE OPTIONS
*bridge-stp* _state_
Activates or deactivates IEEE 802.1d Spanning Tree Protocol
(STP) support of the bridge. Valid values are _on_/_off_.
*bridge-bridgeprio* _priority_
Sets the bridge's priority to _priority_. The priority value is
a number between 0 and 65535. Lower priority values are better.
The bridge with the lowest priority will be elected _root
bridge_.
*bridge-fd* _seconds_
Denotes the bridge forward delay in seconds. Valid values are
between 2 and 30.
*bridge-hello* _seconds_
Denotes the bridge hello time in seconds. Valid values are
between 1 and 10.
*bridge-maxage* _seconds_
Denotes the seconds until another bridge is considerd dead
after reception of its last STP hello message. Valid values
are between 6 and 40.
# EXAMPLES
A simple layer 2 only bridge:
```
auto br0
iface br0
bridge-ports eth0 veth-vm1 tap0
bridge-fd 0
bridge-stp off
```
A bridge with layer 3 configuration:
```
auto br0
iface br0
bridge-ports eth0 veth-vm1 tap0
bridge-fd 0
bridge-stp off
#
address 192.0.2.42/24
address 2001:db8::42/64
```
# SEE ALSO
*ip-link*(8)
*interfaces*(5)
# AUTHORS
Maximilian Wilhelm <max@sdn.clinic>