5db2f29891
Signed-off-by: Maximilian Wilhelm <max@sdn.clinic>
100 lines
2.8 KiB
Markdown
100 lines
2.8 KiB
Markdown
interfaces-vxlan(5)
|
||
|
||
# NAME
|
||
|
||
*interfaces-vxlan* - VXLAN extensions for the interfaces(5) file format
|
||
|
||
# DESCRIPTION
|
||
|
||
Virtual eXtensible LAN (VXLAN) is an overlay network to carry Layer 2 over
|
||
an IP network while accommodating a very large number of tenants. It is
|
||
defined in RFC 7348.
|
||
|
||
Be aware that VXLAN encapsulation adds 50 bytes of overhead to the IP packet
|
||
header (inner Ethernet header + VXLAN + UDP + IP). This should be taken into
|
||
consideration when setting up overlay networks, particularly on underlay
|
||
networks with a conventional 1500 byte MTU.
|
||
|
||
The following options set up VXLAN Tunnel EndPoints (VTEP) interfaces with
|
||
ifupdown-ng.
|
||
|
||
See https://www.kernel.org/doc/Documentation/networking/vxlan.rst and
|
||
https://vincent.bernat.ch/en/blog/2017-vxlan-linux for more information.
|
||
|
||
# VXLAN-RELATED OPTIONS
|
||
|
||
A VXLAN Virtual Tunnel Endpoint (VTEP) interface must an ID set. All
|
||
other options are optional.
|
||
|
||
*vxlan-id* _VNI ID_
|
||
Denotes the VXLAN Network Identifier (VNI) ID for this interface.
|
||
This parameter is required for VTEP interfaces.
|
||
|
||
*vxlan-physdev* _interface_
|
||
Specifies the physical ("underlay") device to use for tunnel
|
||
endpoint communication.
|
||
|
||
*vxlan-local-ip* _address_
|
||
Specifies the source IP address to use in outgoing packets.
|
||
For compatiblity with ifupdown2 _vxlan-local-tunnelip_ is an
|
||
alias for this parameter.
|
||
|
||
*vxlan-remote-ip* _address_
|
||
Specifies the unicast destination IP address to use in outgoing
|
||
packets when the destination link layer address is not known in
|
||
the VXLAN device forwarding database. This parameter cannot be
|
||
specified with the _vxlan-remote-group_ parameter.
|
||
For compatiblity with ifupdown2 _vxlan-remoteip_ is an alias for
|
||
this parameter.
|
||
|
||
*vxlan-remote-group* _multicast group_
|
||
Specifies the multicast group IP address to join. This parameter
|
||
cannot be specified with the _vxlan-remote-ip_ parameter.
|
||
For compatibility with ifupdown2 _vxlan-svcnodeip_ is an alias for
|
||
this parameter.
|
||
|
||
*vxlan-learning* _on/off_
|
||
Specifies if unknown source link layer addresses and IP addresses
|
||
are entered into the VXLAN device forwarding database.
|
||
|
||
*vxlan-ageing* _seconds_
|
||
Specifies the lifetime in seconds of FDB entries learnt by the kernel.
|
||
|
||
*vxlan-dstport* _port_
|
||
Specifies the UDP destination port of the remote VXLAN tunnel endpoint.
|
||
The default is 4789.
|
||
|
||
# EXAMPLES
|
||
|
||
A VTEP with multiple peers addressed via a multicast group:
|
||
|
||
```
|
||
auto vx_v1001_padcty
|
||
iface vx_v1001_padcty
|
||
vxlan-id 655617
|
||
vxlan-physdev vlan1001
|
||
vxlan-remote-group 225.10.1.1
|
||
#
|
||
hwaddress f2:00:c1:01:10:01
|
||
mtu 1560
|
||
```
|
||
|
||
Note that the underlay must have an MTU of at least 1610 to
|
||
carry the encapsulated packets.
|
||
|
||
|
||
A VTEP with one peer (point-to-point configuration):
|
||
|
||
```
|
||
auto vx_ptp1
|
||
iface vx_ptp1
|
||
vxlan-id 2342
|
||
vxlan-local-ip 192.0.2.42
|
||
vxlan-remote-ip 198.51.100.23
|
||
#
|
||
hwaddress f2:00:c1:01:10:01
|
||
```
|
||
|
||
# AUTHORS
|
||
|
||
Maximilian Wilhelm <max@sdn.clinic>
|