diff --git a/README.md b/README.md
index a6e30b2..a3e155c 100644
--- a/README.md
+++ b/README.md
@@ -30,17 +30,19 @@ For compatibility with some legacy ifupdown executors, we also provide the
 
 On musl systems, simply do `make` and `make install` to build and install.
 
-On glibc systems, you must additionally define LIBBSD_CFLAGS and LIBBSD_LIBS:
+On glibc systems, you must install `libbsd-dev` or equivalent and additionally define `LIBBSD_CFLAGS` and `LIBBSD_LIBS`:
 
-    export LIBBSD_CFLAGS=$(pkg-config --cflags libbsd-overlay)
-    export LIBBSD_LIBS=$(pkg-config --libs libbsd-overlay)
-    make
+    # instal packages
+    apt install build-essential libbsd0 libbsd-dev
+
+    # build ifupdown-ng
+    make LIBBSD_CFLAGS="$(pkg-config --cflags libbsd-overlay)" LIBBSD_LIBS="$(pkg-config --cflags --libs libbsd-overlay)"
     make install
 
-To run the tests, do `make check`.
+To run the tests, do `make check`. Running the checks requires `kyua` (`apk add kyua`, not packaged for Debian).
 
 To build the documentation, do `make docs` and `make install_docs`.  Building
-the documentation requires scdoc (`apk add scdoc`).
+the documentation requires scdoc (`apk add scdoc` / `apt install scdoc`).
 
 ## Discussion
 
diff --git a/dist/ifupdown-ng.conf.example b/dist/ifupdown-ng.conf.example
index 339f568..5c4cefd 100644
--- a/dist/ifupdown-ng.conf.example
+++ b/dist/ifupdown-ng.conf.example
@@ -7,13 +7,14 @@
 # Enable support for /etc/if-X.d addon scripts.  These are used for
 # compatibility with legacy setups, and may be disabled for performance
 # improvements in setups where only ifupdown-ng executors are used.
+# Valid values are 0 and 1, the default is 1.
 allow_addon_scripts = 1
 
 # allow_any_iface_as_template:
 # Enable any interface to act as a template for another interface.
 # This is presently the default, but is deprecated.  An admin may choose
 # to disable this setting in order to require inheritance from specified
-# templates.
+# templates.  Valid values are 0 and 1, the default is 1.
 allow_any_iface_as_template = 1
 
 # implicit_template_conversion:
@@ -21,5 +22,5 @@ allow_any_iface_as_template = 1
 # ifupdown-ng automatically converts those declarations to a proper
 # template.  If this setting is disabled, inheritance will continue to
 # work against non-template interfaces without converting them to a
-# template.
+# template.  Valid values are 0 and 1, the default is 1.
 implicit_template_conversion = 1
diff --git a/doc/ADMIN-GUIDE.md b/doc/ADMIN-GUIDE.md
index 6885367..6d3a848 100644
--- a/doc/ADMIN-GUIDE.md
+++ b/doc/ADMIN-GUIDE.md
@@ -20,6 +20,10 @@ in order of importance:
   database, which contains information about what
   interfaces should be configured.
 
+* `/etc/network/ifupdown-ng.conf`: the main configuration
+  file which controls ifupdown-ng's behaviour.  See the
+  *ifupdown-ng Configuration* section below.
+
 * `/run/ifstate`: the interface state file, which denotes
   what physical interfaces are configured, and what
   interface definition they are configured as.
@@ -38,7 +42,34 @@ in order of importance:
 All configuration examples in this guide concern the
 `/etc/network/interfaces` file.
 
-## Basic Configuration
+## ifupdown-ng Configuration
+
+ifupdown-ng allows to configure some parts of it's behaviour.
+Currently the following settings are supported in
+`/etc/network/ifupdown-ng.conf`:
+
+* `allow_addon_scripts`: Enable support for /etc/if-X.d addon scripts.
+  These are used for compatibility with legacy setups, and may be
+  disabled for performance improvements in setups where only
+  ifupdown-ng executors are used.  Valid values are `0` and `1`,
+  default is `1`.
+
+* `allow_any_iface_as_template`: Enable any interface to act as a
+  template for another interface.  This is presently the default,
+  but is deprecated.  An admin may choose to disable this setting
+  in order to require inheritance from specified templates.
+  Valid values are `0` and `1`, the default is `1`.
+
+* `implicit_template_conversion`: In some legacy configs, a template
+  may be declared as an iface, and ifupdown-ng automatically converts
+  those declarations to a proper template.  If this setting is
+  disabled, inheritance will continue to work against non-template
+  interfaces without converting them to a template. Valid values
+  are `0` and `1`, the default is `1`.
+
+## Interface Configuration
+
+### Basic Configuration
 
 To begin with, lets look at a basic configuration for a
 desktop computer.  This scenario involves using the DHCP
@@ -71,7 +102,7 @@ iface eth0
     use dhcp
 ```
 
-## IPv6 RA Configuration
+### IPv6 RA Configuration
 
 With IPv6, stateless auto-configuration is typically used to
 configure network interfaces.  If you are not interested in
@@ -85,7 +116,7 @@ iface eth0
     use ipv6-ra
 ```
 
-## Static Configuration
+### Static Configuration
 
 We can use the `static` executor to configure static IPv4 and
 IPv6 addresses.  If you use the `address` keyword, the `static`
@@ -98,7 +129,7 @@ iface eth0
     gateway 203.0.113.1
 ```
 
-### Multiple Addresses
+#### Multiple Addresses
 
 A typical scenario on servers is where a server has multiple
 IP addresses on a single interface.  In this case you simply
@@ -113,7 +144,7 @@ iface eth0
     gateway 203.0.113.1
 ```
 
-### Dual-stack configurations
+#### Dual-stack configurations
 
 Another typical scenario for servers is to run a dual-stack
 configuration, where interfaces have both an IPv4 and an IPv6
@@ -184,7 +215,7 @@ iface bond0
     [...]
 ```
 
-Is equivalent to:
+Is with respect to dependency equivalent to:
 
 ```
 auto bond0
@@ -215,6 +246,5 @@ used for an interface, use the ifquery(8) command.
 ## Questions
 
 If you have further questions about how to use ifupdown-ng to
-configure a specific scenario, drop by the [ifupdown-ng IRC channel][irc].
-
-   [irc]: irc://irc.as7007.net/#ifupdown-ng
+configure a specific scenario, drop by the
+[ifupdown-ng IRC channel](irc://irc.as7007.net/#ifupdown-ng).